the manufacturing process
DESCRIPTION
Avanti Cigar Company. The Manufacturing Process. Process 3: Go to a charge. Process 2: Shake. Process 1: Loading. Process 4: Swing Transfer. Process 6: Cut and Pack. Process 5: Examine. Process1: A worker takes out the whole - PowerPoint PPT PresentationTRANSCRIPT
The Manufacturing Process Avanti Cigar Company
Process 1:Loading
Process 2:Shake
Process 3:Go to a charge
Process 4:SwingTransfer
Process 5:Examine
Process 6:Cut andPack
Process1: A worker takes out the whole 850 pounds of tobacco from the truck into con-veyor.
Process2: The tobacco follows up the conveyor and the conveyor drops off the tobacco in theshaker.
Process3: The tobacco passes by the system of rakes, and then goes to a part of the machine and holds the tobacco until it needs to be released.
Process4:A swing transfer, takes thetobacco, deposits it and packs it in the end of the rolling table.
Process 5:After the cigars come from therolling table, workers ex-amine the cigars for potential de-fects.
Process6:A worker will then take the cigars out of the tray and put them in a machine that cuts each cigar inhalf. Finally, the cigars will be packed and ready to sell.