PC CONVEYORSAFETY STOPSWITCH

SS CABLEOPERATEDSAFETY STOPSWITCH

MODEL 16BELTALIGNMENTSWITCH

FLOWSWITCH

BRUSH TYPECONVEYORBELTCLEANER

COIL SPRINGCONVEYORBELTCLEANER

RUBBERWIPER BLADEBELTCLEANER

PLOW TYPECONVEYORBELTCLEANER

CONVEYORHOODS

BINAERATORS

TERMS ANDCONDITIONS

"CHARGE IT"

HOME PAGE

Model PC Conveyor Safety Stop Switch

MODEL SRCSPEEDRESPONSIVESWITCH

CLICK HERE

FOR DIMENSIONALINFORMATION

OPERATION INFORMATION:A cable is connected from a fixed point to the cable end connection clevis. A pull on the cable with a movement of approximately 1/2" will actuate the switch, trip the flag arm down, and lock the switch and flag arm in the actuated position. Unit is reset by returning the flag arm to the normal up position.

ACTUATION FORCE: Standard unit is supplied with an actuation (pull) force of 16 lbs. We can supply (at no extra charge) units factory set at 25 lbs. actuating force. This change can also easily be made in the field by simply reversing the end bushing. The standard 16 lbs. actuation force will allow the use of far more cable, per switch, than would ever be required.

For immediate positive shutdown of equipment!

Cable operated conveyor safety PC-stop switch is the finest switch of its kind - rugged construction withstands the hardest usage. Our PC-stop switch can be used for emergency or normal shutdown of conveyor systems, elevator equipment, bulk handling systems, cranes, production and assembly lines. Or any other equipment which may require immediate, positive shutdown.

ULLISTED

SELECTION AND PRICING INFORMATION:1-SINGLE POLE DOUBLE THROW MICRO SWITCHPCL-1S . . . . . . . . left hand . . . . . . . . . $266.00PCR-1S . . . . . . . . right hand. . . . . . . . $266.00

2-SINGLE POLE DOUBLE THROW MICRO SWITCHPCL-2S . . . . . . . . left hand . . . . . . . . . $282.00PCR-2S . . . . . . . . right hand . . . . . . . . $282.00

1-TWO CIRCUIT DOUBLE BREAK MICRO SWITCHfor D.C circuitsPCL-1T . . . . . . . . left hand . . . . . . . . . $312.00PCR-1T . . . . . . . . right hand . . . . . . . . $312.00

2-TWO CIRCUIT DOUBLE BREAK MICRO SWITCHfor D.C circuitsPCL-2T . . . . . . . . left hand . . . . . . . . . $371.00PCR-2T . . . . . . . . right hand . . . . . . . . $371.00

1-SINGLE POLE DOUBLE THROW MICRO SWITCHat each endPCD-2S . . . . . . . . double ended . . . . $373.00

2-SINGLE POLE DOUBLE THROW MICRO SWITCHESat each endPCD-4S . . . . . . . . double ended . . . . $401.00

1-TWO CIRCUIT DOUBLE BREAK MICRO SWITCHat each end for D.C circuitsPCD-2T . . . . . . . . double ended . . . . . $460.00

2-TWO CIRCUIT DOUBLE BREAK MICRO SWITCHESat each end for D.C circuitsPCD-4T . . . . . . . . double ended . . . . . $578.00

SPECIAL APPLICATION OPTIONS AND ACCESSORIES:

HAZARDOUS LOCATIONS: Explosion proof units meet NEMA 7 - class I, Groups C and D • NEMA 9 - class II, Groups E, F and G for hazardous locations. Add "X" to model number, no additional charge.

CORROSIVE LOCATIONS: Epoxy coated switches with standard flag arms and plated torsion springs.SINGLE END SWITCHES . . . . . . . . . . . . add $40.00DOUBLE ENDED SWITCHES . . . . . . . . . add $44.00Please add "E" to model number.

RED WARNING LIGHT for use in dark and remote areas (requires two micro switches peer end of housing). 125V AC. Add prefix "L" to model number . . . . . . . . . . $170.00

PENNSYLVANIA B.O.T.E. APPROVED:PCD-2T-B.O.T.E. . . . . . . . . . . . . . . . . . . . . . . . . . $460.00

ACCESSORIES:TORSION SPRINGS left or right hand . . . . . .ea. $2.90

CABLE SUPPORT EYE BOLTS . . . . . . . .ea. $1.70

CABLE END FITTINGS . . . . . . ea. 58¢

CABLE WITH ORANGE PROTECTIVE COATINGVinyl coated . . . . . . 44¢ ft.Nylon coated . . . . . 71¢ ft.

CONDUIT PLUG . ea. $1.10PC MOUNTING BRACKET . . . . . ea. $8.00DOWNLOAD A PRINTABLE PDF OF THIS PAGE