track 1. stress-strain analysis organized by prof....

Track No. 1 Session Chair#1Session Name Stress and Strain Analysis 1 CHO Chongdu, Prof., Inha Univ.

Date 9/19 Mon. Session Co-ChairOpening Time 16:30 AKINIWA Yoshiaki, Prof., Yokohama National Univ.Closing Time 17:45

Room #204Authors Title of the Paper

1HE Xuehong, YIN Qizhen, TENGYunnan, XIE Liyang

Solution of Driving Force Based on the Virtual Work Principle for Scissors LiftPlatform

2MOON Sung Wook, CHOIByoung-Ho, KIM Myung Ho

Development and Characterization of New Mold Formwork using LightweightHybrid Materials

3

FURUKAWA Naohiro,KINOSHITA Takahiro,KAWAKAMI Takashi, OOMORIHaruna, KAWABE Yoshinari,TACHIBANA Masao

Spring Back Phenomena of Steel-Bars under Three-Points Bending Test

4FUJIGAKI Motoharu,YOSHIKAWA Takaaki, MURATAYorinobu

Dynamic Strain Distribution Measurement of Deformed 3D Object usingWeighting Phase Analysis Method

5

NOGUCHI Aiko, SASAGAWAKeisuke, ODA Masafumi,SHIOTA Naofumi, SATO Toru,HARA Toshiaki

Finite Element Analysis on Intramedullary Nail Fixation for FemoralSubtrochanteric Fracture

Track No. 1 Session Chair#2.Session Name Stress and Strain Analysis 2 FUJIGAKI Motoharu, Prof., Fukui Univ.

Date 9/20 Tue. Session Co-ChairOpening Time 9:30Closing Time 10:30


1 ONO YuichiCyclic Stress Measurement Method using Fractal Properties of Grown Grains inElectrodeposited Copper Foil

2TOGASHI Masaki, KUSUNOKITaiga, INOUE Shohei, ONOYuichi

Measurement of Surface Crack Opening Stress of Fine Particle Peened A7075Aluminum Alloy by Digital Image Correlation

3

AKINIWA Yoshiaki, TOMINAGAMakoto, KIMURA Hidehiko,SETOYAMA Daigo, FURUSAKOSeiji, IWATA Keiji

Evaluation of Deformation Behavior of Notched Grain-Oriented Electrical Steel byEBSD Method

4MIYOSHI Hayate, NISHIDAMasayuki

Evaluation of Residual Stresses Distribution by the X-ray and the Ultrasonic

Track No. 1 Session Chair#3.Session Name X-ray Measurement SHIBANO Junichi, Prof., Kitami Institute of Technology



1IKEUCHI Takehito, TSUBAKIShinki, IMAFUKU Muneyuki

Development of Triaxial Strain Analysis Method for a Cubic Single Crystal by X-rayDiffraction Measurement

2MATSUE Tatsuya, NISHIDAMasayuki, HANABUSA Takao

Change in Residual Stresses on Repeated Bending Loading Process of the Cucoated Materials.

3NISHIDA Masayuki, MATSUETatsuya, HANABUSA Takao

Residual Stress Measurement of CFRP by X-ray Transmission Diffraction

4IMAMOTO Keigo, NISHIDAMasayuki

Residual Stress Estimation of CFRP by X-ray Stress Measurement Method

5HASHIMOTO Dai, NISHIDAMasayuki

X-ray Residual Stress Measurement of CFRP in the Cryogenic Temperature

Track 1. Stress-Strain Analysis organized by Prof. AKINIWA

Track No. 2 Session Chair

#1Session NameStructural Design, Optimal

Design, Multiphysics 1IZUMI Satoshi, Prof. the Univ. of Tokyo

Date 9/19 Mon. Session Co-ChairOpening Time 14:30Closing Time 15:45


1SUGASAWA Masayuki,KOBAYASHI Masayuki,MURASHIGE Takuya

Strength Analysis of the Glass Fiber Reinforced Plastic(the Case Material of the Wireless Power Transfer Coil as an Example)

2NAKAMURA Marika, TAKEOKyohei, OSADA Toshio, OZAKIShingo

Finite Element Analysis of Damage-Healing Behavior in Self-Healing Alumina/SiCNanocomposites Materials

3OBA Yoshitomo, TAKEO Kyohei,NAKAO Wataru, OZAKI Shingo

Numerical Study on Optimal Composite Design of Self-Healing Fiber-ReinforcedCeramic Matrix Composite

4KIM Seung Jae, LEE MyeongWoo, JUNG Hyun Woo, KIMYun Jae, PARK Jun Hyub

Structural Design of Vertical Type Ni Alloy Probe Considering Contact Force usingFE Analysis

5INABA Kazuaki, ISHII Tomoya,TAKAHASHI Kosuke,KISHIMOTO Kikuo

Impulsive Force due to Bubble Collapse Estimated by Inverse Analysis


#2.Session NameStructural Design, Optimal

Design, Multiphysics 2INABA Kazuaki, Prof. Tokyo Institute of Technology



1MATSUOKA Shuhei,HASUNUMA Shota, OGAWA

Surface Shape Variation Analysis under Low Cycle Fatigue Condition using CrystalPlasticity FEM

2

TAKAMOTO So, KUMAGAITomohisa, YAMASAKI Takahiro,OHNO Takahisa, KANETAChioko, HATANO Asuka, IZUMISatoshi

Thermal Oxidation Simulation of Silicon by Charge-Transfer Type MolecularDynamics

3KIM Hyung-Kyu, YOON Kyung-Ho

On the Minimum Radius of the Contact Corner using Contact MechanicsTheory

4 JE Sang-Yun, CHANG Yoon-SukStructural Integrity Assessment of Integrated Reactor Internals under VibrationAssessment Conditions

5LV Zheng, XING Jiandong, FUHanguang, ZHENG Ming, SHAODapeng

The Influence of Al Element on the Mechanical Properties and OxidationResistance of Fe-Cr-B-Al Alloys

Track2. Structural Design, Optimal Design, Multiphysics organized by Prof. IZUMI

Track No. 3 Session Chair#1.Session Name Damage in Ni-base Superalloy FUJIYAMA Kazunari, Prof., Meijo Univ.

Date 9/21 Wed. Session Co-ChairOpening Time 9:30 Kim Jong-Sung, Prof., Sejong Univ.Closing Time 10:15

Room Special Meeting RoomAuthors Title of the Paper

1WANG Run-Zi, ZHANG Xian-Cheng, TU Shan-Tung

Estimated of Strain Energy Density Exhaustion under Creep-Fatigue interactionConditions

2MA Jieran, YANG Xiaoguang,SHI Duoqi

Service Temperature Estimation of Nickel-Based Superalloy Turbine Blades Basedon Microstructural Degradations

3MURAKOSHI Takuya, SUZUKIKen, MIURA Hideo

Observation of the Initial Damage in Ni-Base Superalloy under Mechanical Loadsat High Temperature

Track No. 3 Session Chair#2.Session Name Damage Modelling KAMAYA Masayuki, Dr., Institute of Nuclear Safety System, Incorporated

Date 9/21 Wed. Session Co-ChairOpening Time 10:30 SHIN, Hyung-Seop, Prof., Andong National Univ.Closing Time 11:15


1NGUYEN Hoang Anh Tuan, BUIQuoc Tinh, HIROSE Sohichi

Stress-Based Transient Gradient-Enhanced Damage Modeling of Quasi-BrittleMaterials

2YAMAMOTO Joji, OSADAToshio, OZAKI Shingo

Proposal of Kinetics-Based Damage-Healing Constitutive Model for Self-HealingCeramic Materials

3KIM Jong-Sung, KIM Ji-Soo,KIM Yun-Jae

Proposal of a PWSCC Growth Assessment Methodology for Alloy 600 ComponentsBased on a Modified PWSCC Initiation Model Considering Cold Work and StressTriaxiality


#3.Session NameDamage Mechanisms and Field

Data AnalysisOHTANI Toshihiro, Prof., Shonan Institute of Technology

Date 9/21 Wed. Session Co-ChairOpening Time 11:30Closing Time 12:00


1 IIDA Yudai, FUJIYAMA KazunariStatistical Inference of Cycles and Hours to Thermomechanical Fatigue Cracking inTurbine Components

2TAKAHASHI Motoki,SHINOZAKI Taichi, SUZUKI Ken,MIURA Hideo

Strain-Induced Initial Damage of Mod. 9Cr-1Mo Steel at Elevated Temperatures

Track 3. Damage Mechanics organized by Prof. FUJIYAMA


#1Session NameFracture Mechanics, Crack

Growth 1TOHMYO Hironori, Assoc. Prof., Tohoku Univ.



1KANG Zuoyi, BUI Quoc Tinh,HIROSE Sohichi

Fracture Modeling of Solids by An Enhanced Nodal Stress Extended Finite ElementMethod

2NAKADA Takeshi, MATSUDAShinya

Ring Crack Initiation Characteristics of Silicon Nitride Ceramic Ball after ThermalShock

3YE Shen, TU Shan-Tung,ZHANG Xian-Cheng, ZHANGCheng-Cheng

Prediction of Multi-Scale Fatigue Crack Propagation Behavior in Nickel-BasedAlloy GH4169

4

MUHAMAD AZMI MuhamadSafwan, FUJII Tomoyuki,TOHGO Keiichiro, SHIMAMURAYoshinobu

On the ΔJ-Integral to Characterized Elastic-Plastic Fatigue Crack Growth underCyclic Large Scale Deformation

5YANG Li, LIU Li, JIANG Jian-Tang, YANG Li, ZHEN Liang

The Influence of Loading Path and Temperature on the Deformation Behavior andMicrostructure of 5A06 Aluminum Alloy Sheets

6WATANABE Yousuke,FUJISAWA Shoichi, YONEZUAkio

Characterizations of Interfacial Strength and Crack Growth of Surface Coating byusing Laser Ultrasonic Wave


#2.Session NameFracture Mechanics, Crack

Growth 2YONEZU Akio, Assoc. Prof., Chuo Univ.



1TOHMYOH Hironori, MATSUDOYohei

Elastic-Plastic Properties of Cu Microwires Modified with Joule Heat

2TAKEUCHI Tomoaki, NAKANOHiroko, UEHARA Toshiaki,TSUCHIYA Kunihiko

Effect of Dissolved Gases on Mechanical Property of AISI 304 and 316 StainlessSteels under High Temperature and Pressure Water

3CAO Yupeng, HE Yinbiao, HUIHu, LI Hui

Structural Integrity of the Chinese Qinshan 300-MWe Reactor Pressure Vesselunder Pressurized Thermal Shock using the Master Curve Method

4ZHAO Xu, SHITAMURA Yuki,MURAOKA Mikio

Fracture Behavior of Metallic Nanocoil Webs

5 SIM Jae Min, CHANG Yoon-Suk Crack Growth Evaluation of CASS Material by using XFEM

6 KASABA Koichi, DOI MasanaoDuctile Fracture and Strain Constraint of a Round Bar with a Deep CircumferentialCrack



Growth 3ZHAO Xu, Assistant Prof., Akita Univ.



1KIM Hune-Tae, RYU Ho-Wan,KIM Yun-Jae

Quantification of in-Plane Constraint Effects using Fe Damage Analysis on SENBSpecimens

Track 4. Fracture Mechanics, Crack Growth organized by Assoc. Prof. TOHMYO

2

TAMAKI Itaru, SHIRASU Keiichi,MIYAZAKI Takamichi,YAMAMOTO Go, BEKAREVICHRaman, HIRAHARA Kaori,SHIMAMURA Yoshinobu,INOUE Yoku, HASHIDAToshiyuki

Evaluation of Tensile Properties of Multi-Walled Carbon Nanotubes Synthesizedby Chemical Vapor Deposition

3WANG Lei, LIU Yang, SONG Xiu,AN Jinlan, XU Guohua, ZHAOGuangpu

Effect of Microstructure Degradation on Fatigue Crack Propagation Behavior ofIN718 Superalloy

4KIKUCHI Hiroki, SASAGAWAKazuhiko, FUJISAKI Kazuhiro

Effect of Taper Shape of IC Line on Threshold Current Density of ElectromigrationDamage



Growth 4SASAGAWA Kazuhiko, Prof., Hirosaki Univ.



1MIKADO Hiroko, IWAMOTOShogo, OGUMA Noriyasu,KAWAMURA Shingo

Fracture Mechanics Approach to Fatigue Crack Propagation of WC-Co CementedCarbides under Four-Point Bending Fatigue

2ZHENG Liu, LI Liu, SIBO Zhang,WANGZHI, PINGLI Mao, YUEWang

Study on Solidification Behavior and Hot Tearing Susceptibility of Mg-Zn-Y Alloys

3YIN Yan, JU Yang, MORITAYasuyuki, TOKU Yuhki, CHENHaibo

Effects of Electro-Pulsing on Fatigue Properties of Copper with Rough Surface

4 KAMAYA MasayukiStress Corrosion Crack Growth Simulation for Welding Joint of Primary Pipe ofNuclear Power Plants

5SHI Hui-Ji, QIU Wen-Hui, NIULi-Sha

Effects of Secondary Orientations on Fatigue Crack Growth in a Nickel BasedSingle Crystal Superalloy


#1Session NameMaterial Behavior and

MeasurementSHIN Hyung-Seop, Prof., Andong National Univ.

Date 9/22 Thu. Session Co-ChairOpening Time 9:45 Baek Un-Bong, Dr., Korea Research Institute of Standards and ScienceClosing Time 10:45


1TAKITA Atsuko, SASAKIKatsuhiko, OHGUCHI Ken-ichi,FUJIKI Hiroyuki

Effective Area of Indentation Creep Test Considering Vertex Angle of Indenter

2

LEE Myeong-Woo, KIM Seung-Jae, JUNG Hyun-Woo, MYUNGMan-Sik, YUN Sung-Sik, CHOISungchul, PARK Jun-Hyub, KIMYun-Jae

Effect of Strip Specimen Geometry on Tensile Strength of Polymer Thin Film

3

EBATA Masaaki, NONOShintaro, TSUTSUMI Kota,MITOMI Shinzo, TATENOMasayoshi

Optimum Wire Electric Discharge Machining Condition for Electric ConductiveZirconia Ceramics

4QIU Risheng, LUAN Baifeng,SONG Zhenli, WANG Kuan,ZHU Haiping, LIU Qing

Effects of Interfacial Intermetallic Compounds on Mechanical Behaviors ofTA1/Q235 Clad Plates

Track No. 5 Session Chair#2 Session Name Crack and Optical Method NAKADA Masayuki, Prof., Kanazawa Institute of Technology

Date 9/22 Thu. Session Co-ChairOpening Time 11:00Closing Time 12:00


1

YOO Seung Chang, CHOIKyoung Joon, KIM Ji Soo, CHOIByoung-Ho, KIM Yun-Jae, KIMJong-Sung, KIM Ji Hyun

Stress Corrosion Cracking Initiation Behavior of Thermally Aged Alloy 600 underTriaxial Stress Condition

2NIITSU Yasushi, WADA Mami,KITAMORI Akihisa, ISODAHiroshi, IIZUKA Takaaki

Experimental Strain Measurement of Cross Laminated Timber Panel by DigitalImage Correlation

3ZAN Htun Nyein Chan,NGUYEN Thanh Tuan, HUNGNguyen Manh, YOON Kee Bong

Study on Creep Fracture Behavior of SUS 304H with Vanadium Addition usingSmall Punch Creep Tests

4JIE Zhao, CONGQIAN Cheng,XINYUE Liu, YAN Hou

Color-Change Inspection Method to Investigate Surface Damage and FatigueCrack Initiation on a 304 Stainless Steel

Track 5. Experimental Technique, Characteristic Evaluation organized by Prof. SUZUKI

Track No. 6 Session Chair#1.Session Name Fatigue Life SAITO Toshiyuki, Chief Specialist, Toshiba Corporation



1HE Lei, AKEBONO Hiroyuki,KATO Masahiko, SUGETAAtsushi

Fatigue Life Estimation Method of Sus316 under Variable Amplitude Loading inVery High Cycle Regime

2NISHIKAWA Hide-aki,TAKEUCHI Etsuo, FURUYAYoshiyuki

Study on Giga-Cycle Fatigue Properties and Non-Propagating Fatigue Crack forA5083P-O Aluminum Alloy

3KOBAYASHI Yukiyoshi,KISHIMOTO Yoshinao,OHTSUKA Toshihisa

Fatigue Life Prediction Based on Fatigue Mechanism (in the Case of Stress Ratio: R= -1)

4

ASADA Seiji, KANNO Satoshi,KANASAKI Hiroshi, NAKANEMotoki, OGAWA Takeshi,KOMOTORI Jun, KOBAYASHIHideo

Activity of Subcommittee for Organizing Question and Answer of FatigueKnowledge in the Japan Welding Engineering Society

Track No. 6 Session Chair#2.Session Name Fatigue Strength SUGETA Atsushi, Prof., Hiroshima Univ.



1YANASE Keiji, SCHÖBAUER MBernd, ENDO Masahiro

Fatigue Strength of 17-4PH Stainless Steel with Small Defect

2DEGUCHI Tomohiro, KIM H.J.,MATSUO T., TAKEMOTO S.,IKEDA T., ENDO M.

Prediction of the Fatigue Strength of Ferritic-Pearlitic Ductile Cast Iron ContainingSmall Defects

3MIAO Guolei, YANG Xiaoguang,SHI Duoqi

Notched Thermal Fatigue Behavior of Nickel-Based Superalloy GH536

4TAN Li, ZHANG Xiyan, SHUYang, YIN Ruisen, LIU Qing

Effects of Pre-Deformation on the Mechanical Properties and FractureMorphology of AZ31 Magnesium Alloy


#3.Session NameFatigue Strength and Crack

PropagationASADA Seiji, Engineering Manager, Mitsubishi Heavy Industries, LTD.



1

YAMAYOSE Yu, MONDATomoko, KUGIMIYA Tetsuya,MUKAI Minoru, WATANABENaotake, TOGASAKI Takashi,MASUNAGA Takayuki

Experimental and Analytical Evaluation of Fatigue Crack Initiation andPropagation in Solder Joints of Power Semiconductor Chips

2

KASHI Takaharu, HORIKAWANoriyo, MIYAJIMA Toshiro,UENO Akira, SAKAIDA Akiyoshi,IWAI Yoshiro, KAWANO Yuki

Comparison of Static and Fatigue Strength of High Speed Tool Steels Coated withTiAlN Film by Different Coating Methods

Track 6. Fatigue Strength, Fatigue Crack organized by Mr. SAITO

3

KAWANO Yuuki, HORIKAWANoriyo, MIYAJIMA Toshiro,NOMURA Yukihiro, KITAGAWATooru, UENO Akira, SAKAIDAAkiyoshi, MORI Takao

Effect of Kinking Damage on Fatigue Strength of High-Modulus Type PBO Fiber

4 HE Weifeng, NIE Xiangfan,High Cycle Fatigue Performance of Laser-Shock-Peened TC4 Titanium AlloySpecimens Subjected to Foreign Object Damage

5TANAKA Kumiko, YOSHIMURAToshihiko

Study on Fatigue Strength Improvement of Aluminum Alloy by Water JetCavitation

Track No. 6 Session Chair#4.Session Name Fatigue, Torsion/ Shear SAITO Toshiyuki, Chief Specialist, Toshiba Corporation



1

TAKEMURA Takashi, MITSUNEMasanori, DOI Misato,TSUTSUMI Noriko,YAMAMOTO Takaei, ITOHTakamoto

Effects of Strain Rate on Reversed Torsion Low Cycle Fatigue Behavior ofHydrogen Charged Carbon Steel

2IKEDA Yuichi, YANASE Keiji,ENDO Masahiro

Investigation of Behavior of Small Shear-Mode Cracks in High-Cycle FatigueRegime

3KIM Hyojin, YANASE Keiji,ENDO Masahiro

Near-Threshold Fatigue Crack Growth Behavior in Annealed 0.09% Carbon Steelunder Torsional Loading

4SAKAMOTO Ryu, OGUMANoriyasu, FUKAMI Mai, ANNETsuyoshi

Improvement of Torsional Fatigue Testing Machine for Hard Materials

5LI Zhen-Lei, SHI Duo-Qi, ZHOUMing-Nan, CHEN Lei, MIAOGuo-Lei

Low Cycle Fatigue-Creep Life Prediction For Low Pressure Turbine Blade underHigh Temperature

Track No. 7 Session Chair#1.Session Name X-ray Stress Measurement 1 SASAKI Toshihiko, Prof., Kanazawa Univ.

Date 20-Sep Session Co-ChairOpening Time 9:00 KOBAYASHI Yuji, Dr., Sinto Co. Ltd.Closing Time 10:15


1 SASAKI ToshihikoFull Use of a Debye-Scherrer Ring for X-ray Stress Measurement of PolycrystallineMaterials with cosα Method

2EJIRI Shouichi, OHBA Hiroaki,SASAKI Toshihiko

Three-Dimensional Distribution Analysis of Bragg Angles in X-ray StressMeasurement using Two-Dimensional Detector

3

MIZUNO Ryoji, NISHIKAWASatoru, FURUKAWA Takashi,SASAKI Toshihiko, MIHARATsuyoshi

X-ray Residual Stress Measurement of Weld Heat-Affected Zone in AusteniticStainless Steel Weld by cosa Method

4MITSUI Shingo, NISHIMURARyutaro, MIYOSHI Toshinobu,ARAI Yasuo, SASAKI Toshihiko

Development of X-ray Stress Measurement System using SOI Pixel Detector

5MATSUDA Mariko, OKITAKeisuke, NAKAGAWATomokazu, SASAKI Toshihiko

Highly Efficient Internal Residual Stress Analysis of Cold-Formed Steel by InherentStrain Method using X-ray Cosα Measurements

Track No. 7 Session Chair#2.Session Name X-ray Stress Measurement 2 EJIRI Shouichi, Prof., Iwate Medical Univ.

Date 20-Sep Session Co-ChairOpening Time 10:30 MIZUNO Ryoji, Dr., JAEPECClosing Time 12:00


1YAMADA Junya, NAKATANIMitsuyoshi, SASAKI Toshihiko

X-ray Residual Stress Measurement of Weld using Cosα Method with CompactMeasurement Equipment

2KOHRI Ami, TAKAKU Yasuhiro,NAKASHIRO Masashi

A Comparison of Residual Stresses Measured by XRD using the “cosα” and the“sin2ψ” Methods under the Various Stress Conditions

3

HASEGAWA Naoya, KAMURANaoya, FUJITA Takumi,UCHIDATE Michimasa, ABOMasayoshi

Improvement of Rolling Contact Fatigue Life by Controlling Run-in SurfaceCharacteristics

4KOBAYASHI Yuji, AOKI Kan,MATSUI Akinori

Residual Stress Measurement in Production Line of Shot Peening

5 NOZUE Hidekazu, SUZUKI ShojiX-ray Residual Stress Measurements for the Manufacturing Process and It'sApplication

6NEZU Akimitsu, KIKUCHITakuya, YASUKAWA Shoichi

Evaluation of Triaxial Stress State by X-ray Diffraction　Incorporating d0

Optimization

Track No. 7 Session Chair#3.Session Name Ultrasound MIZUTANI Yoshihiro, Assoc. Prof., Tokyo Institute of Technology

Date 20-Sep Session Co-ChairOpening Time 13:30 OHARA Yoshikazu, Assistant Prof., Tohoku Univ.Closing Time 15:00


1MIHARA Tsuyoshi, HAMAIMakoto

Improvement of SPACE to Investigate the Subharmonic Wave GenerationBehavior at Fatigue Cracks

2IBRAHIM Asriana, TAMAIChiaki, NAKAHATA Kazuyuki

Two-Dimensional EFIT Modeling of Closed Crack for Nonlinear Ultrasonic Testing

3KUBO Shiro, MURAKAMIKotaro

Time Reversal Method for Crack Identification by the Active Pulse Echo Methodand the Effect of Probe Spacing

Track 7. Non Destructive Inspection organized by Prof. MIHARA

4 MORI Naoki, BIWA ShiroAnalysis of Lamb Wave Reflection and Transmission at a Butt Adhesive Joint ofPlates

5ASHIZAWA Takeshi, MIZUTANIYoshihiro, TODOROKI Akira,SUZUKI Yoshiro, SATO Akiyoshi

Ultrasonic Inspection for Curved Delaminations in CFRP Structures

6

MATSUYA Iwao, SAITOTakamasa, KUWAHARATakashi, KONDO Mizuki,OHNUMA Kiyoshi, IHARA Ikuo

Measuring Thickness and Ultrasound Velocity of Thin Film by Means of AcousticResonant Spectroscopy

Track No. 7 Session Chair#4.Session Name Ultrasound & AE MIHARA Tsuyoshi, Prof., Tohoku Univ.

Date 20-Sep Session Co-ChairOpening Time 15:15 KUBO Shiro, Prof., Setsunan Univ.Closing Time 16:45


1FUKUDA Makoto, SUGIURATatsuya, IMANO Kazuhiko

Detection of Second Harmonic Components Generated from Weld Defect usingLamb Waves

2OHARA Yoshikazu, OSHIUMITaro, YAMANAKA Kazushi,MIHARA Tsuyoshi

Surface-Defect Imaging using Ultrasonic Phased Array with Surface Acoustic Wave

3 GUO Qianhui, IHARA IkuoDevelopment of Ultrasonic Pulse-Echo Method to Monitor the Thawing Process ofFrozen Meat

4FUJISAWA Satoru, MANOHiroki, MIYAKE Koji

A Novel Detection Method of the Acoustic Emission by using the Scanning ProbeMicroscope

5MIZUTANI Yoshihiro, MIKITakehiro, SUZUKI Yoshiro,TODOROKI Akira

Lamb-Wave Tomography Utilizing AE Source Location Algorithm

6JUNG Doyun, MIZUTANIYoshihiko, TODOROKI Akira,SUZUKI Yoshiro

Study on Change of b-value by Different Fracture Mode in GFRP

Track No. 7 Session Chair#5.Session Name Thermal NDE Techniques INOUE Hirotsugu, Prof., Tokyo Institute of Technology

Date 21-Sep Session Co-ChairOpening Time 9:15 SAKAGAMI Takahide, Prof., Kobe Univ.Closing Time 10:45


1KAWAI Ryogo, YOSHIKAWATakuumi, KUROKAWA Yu, IRIEYousuke, INOUE Hirotsugu

Rapid Evaluation of Fatigue Limit using Infrared Camera: Comparisons betweenDifferent Cameras and Methods for Measuring Temperature Evolution

2SHIOZAWA Daiki, AKAI Atsushi,INABA Ken, SAKAGAMITakahide

Relationship between Dissipated Energy and Growth Behavior of Slip Bands inAustenitic Stainless Steel

3AKAI Atsushi, SHIOZAWA Daiki,SAKAGAMI Takahide

Influence of Extension Tubes on Thermoelastic Temperature Measurement withInfrared Thermography

4ENDO Hideki, SAKAGAMITakahide, SAIDA Keisuke, KUBOShiro

A Basic Study on Thickness Measurement by Analysis of Inverse Heat Conduction

5

IZUMI Yui, SAKAGAMITakahide, MORIYAMA Akira,MIZOKAMI Yoshiaki,SANNOMIYA Hiroyuki

Detection of Semi-Elliptical Internal Crack Based on Temperature GapMeasurement

6

HANAI Taku, MIZOKAMIYoshiaki, SAKAGAMI Takahide,SHIOZAWA Daiki, HIGASHITomoyumi, IZUMI Yui

Verification of Repair Method for Fatigue Cracks in Vertical Stiffener at Support ofSteel Deck

Track No. 7 Session Chair #6.Session Name Acoustic NDE for Concrete IHARA Ikuo, Prof., Nagaoka Univ. of Technology

Date 21-Sep Session Co-ChairOpening Time 11:00 MATSUYA Iwao, Assistant Prof., Nagaoka Univ. of TechnologyClosing Time 12:00


1HATTORI Shinichi, KAMADAToshiro, UCHIDA Shinya,TERASAWA Koki

Impact Elastic-Wave Methods for Detection of Grouting Condition of TendonDucts in PC Members using Mechanically and Magnetically Driven Impact

2OHNO Kentaro, NISHIMURAKeiichi, UJI Kimitaka, UENOAtsushi

Evaluation of Un-Grouted Tendon Duct in Prestressed Concrete by Impact ElasticWave Method

3

UCHIDA Shinya, KAMADAToshiro, MIYATA Hirokazu,HATTORI Shinichi, TERASAWAKoki

Non-Destructive Evaluation for Soundness of Adhesive Portion around Post-Installed Anchor Bolts in Concrete Member by Analysis-Aided Elastic WaveMethod

4

SHIOTANI Tomoki, NISHIDATakahiro, ASAUE Hisafumi,MIYAGAWA Toyoaki, FURUNOShogo, HIRANO Keichi

Damage Visualization of AAR-Deteriorated RC Bridges by Means of AETomography

Track No. 8 Session Chair#1Session Name Miniature Specimen Testing IGARI Toshihide, Dr., Mitsubishi Heavy industries

Date 2016/9/21 Session Co-ChairOpening Time 9:15Closing Time 10:30


1KOBAYASHI Ken-ichi,KAWASHIMA Tsuyoshi

Creep Properties at Rupture by using Both Miniature Round Bar and MiniaturePlate Specimens

2 Naveena, KOMAZAKI Shin-ichi Small Punch Creep Behavior of High Nitrogen Heat Resistant Ferritic Steels

3ZHANG Shengde, YAMAZAKISouichi

Creep Deformation and Rupture of Long-Term Used Gr.91 using Miniature CreepSpecimen

4HONDA Takashi, FUKAHORITakuya, IGARI Toshihide,CHUMAN Yasuharu

Creep Damage Simulation of Simulated-HAZ Notched Bar Specimens of Modified9Cr-1Mo Steel

5TSURUTA Hideki, YOSHIDAKimiaki, TODA Hiroyuki,TAKEUCHI Akihisa

3D Quantitative Evaluation of Creep Void in 9Cr Steel Welded Joint with X-RayMicro-Tomography

Track No. 8 Session Chair#2.Session Name Strength of Weldments KIMURA Kazuhiro, Dr., National Institute for Materials Science



1

OHTANI Toshihiro, HONMATakumi, ISHIKAWA Akitaka,ISHII Yutaka, TABUCHIMasaaki, HONGO Hiromichi,HIRAO Masahiko

Nonlinear Ultrasonic Evolution in Welded Joint for Modified 9Cr-1Mo Steel duringCreep

2TEZUKA Hideshi, TOKOROMasaaki, ITO Takahisa

Microstructural Type IV Creep Damage Evolution of Large Sized SpecimensMachined from ASME T92 Thick Weld Joint

3KUBUSHIRO Keiji, KIMURATakahiro, SAWADA Kota,KIMURA Kazuhiro

Effect of Repair Welding on Creep Rupture Strength of Gr.91 Steel

4YAGUCHI Masatsugu,YAMAZAKI Souichi, YAMADASusumu

Effect of Prior Heat Treatment on Creep Strength of Grade 91 Steel Welded Joint

5 NISHIDA Hidetaka Innovative Method of Reinforcing Damaged High Temperature P91 Steam Piping

Track No. 8 Session Chair#3.Session Name High Temperature Strength KOBAYASHI Ken-ichi, Prof., Chiba Univ.



1SUZUKI Kenta, KANEKOHideaki, KARATO Takanori,KAMEYAMA Tatsuya

Creep Behavior of Bi-Crystal with Grain Boundary Parallel to the Loading Directionfor Ni-Base Superalloy

2LIU Yang, WANG Lei, AN Jinlan,XU Guohua, ZHAO Guangpu

Recrystallization Behavior of IN718 Superalloy under Pulse Current

3KIMURA Kazuhiro, MURATAMasaharu, KAMIHIRAKazushige, KOBAYASHI Satoru

Creep Strength Property and Microstructural Evolution During Long-Term Creepof 18Cr-9Ni-3Cu-Nb-N (KA-SUS304J1HTB) Austenitic Steel

Track 8. Strength at Elevated Temperature organized by Dr. KIMURA

4IWATA Yasuhiro, SHIBAYAMATakashi, FUJIYAMA Kazunari,KIMACHI Hirohisa

Notched Creep Life Assessment Based on FEM Analysis and Its Comparison withEBSD Strain Analysis

5OKAJIMA Satoshi, WAKAITakashi, KAWASAKI Nobuchika

Study on Unified Criteria for Preventing Plastic Strain Accumulation due toThermal Stress with Long Range Travel

Track No. 9 Session Chair#1Session Name SCC & Corrosion TAKEDA Yoichi, Prof., Tohoku Univ.



1LUO Linghua, HUANG Yuhui,XUAN Fu-Zhen

The Influence of Strain Rate on Environmtally Assisted Cracking of CrNiMoVWelded Joint in Simulated Environment of Nuclear Steam Turbine

2ZHANG Litao, WANG Jianqiu,HAN Enhou

Effect of Temperature and Loading Mode on Environmentally Assisted Cracking ofa Domestic Forged 316L Stainless Steel Pipe in High Temperature Water

3 PARK Jae Phil, BAHN Chi BumEffects of Experimental Conditions on Weibull Estimation Uncertainty: Applicationto Crack Initiation Testing

4HUANG Yuhui, TU Shan-Tung,XUAN Fu-Zhen

Statistical Analysis of Corrosion Pits on 304 Stainless Steel under MultiaxialFatigue Loading

Track No. 9 Session Chair#2.Session Name Oxidation and Corrosion KOMAZAKI Shin-ichi, Prof., Kagoshima Univ.



1ISHIKAWA Tatsuya, OZAWAYuji,SAITO Masashi NAKANOSusumu, TAKEDA Yoichi

Oxidation Characteristics of Ni-Base Superalloys in Supercritical Water andSuperheated Steam Environments at 750°C

2HONG Lihua, TANG Qunhua,Dai Pinqiang

Study of the High Temperature Oxidation and High Temperature CorrosionBehavior of AlxCrCoFeNi High Entropy Alloy

3NAKANO Hiroko, SHIBATAHiroshi, TAKEUCHI Tomoaki

Corrosion Property of Sheath Materials using MI Cables at Conditions SimulatedSevere Accident

4WANG Yong, XING Jiandong,MA Shengqiang, ZHENG Ming,YANG Duoxue

The Interaction Effect between Corrosion and Wear of Fe-3.5 wt.% B Alloy inLiquid Zinc

Track 9. Environmental Strength, Corrosion organized by Prof. KOMAZAKI

Track No. 10 Session Chair#1Session Name Wear in Tribology 1 MIYAJIMA Toshiro, Lecturer, Toyama Prefectural Univ.

Date 9/21 Wed. Session Co-ChairOpening Time 11:00 KORENAGA Atsushi, Researcher, AISTClosing Time 12:00


1 OKUBO Hikaru, SASAKI ShinyaTribological Properties of Al-Si Alloys against Diamond-like Carbon Films underLubrication with Fully Formulated Oil

2NAMBU Koichiro, MONDAKoki, TOYA Hitoshi, USAMIHatsuhiko

Effect of Mechanical Properties on the Erosion Mechanism by Fine ParticlePeening

3PAN Wu, GAO Yimin, SUNLiqiu, DANG Shuai

Tribological Behavior of B4C/hBN Ceramic Composites Coupled with Ductile Ironsunder the Lubrication of Emulsion

4KAWADA Shouhei, WATANABESeiya, SASAKI Shinya

Effect of Sliding Materials on Lubricity of Halogen-Free Ionic Liquids

Track No. 10 Session Chair#2.Session Name Wear in Tribology 2 USAMI, Hatsuhiko, Prof. Meijyo Univ.

Date 9/22 Thu. Session Co-ChairOpening Time 10:00 MIYAJIMA, Toshiro, Lecturer, Toyama Prefectural Univ.Closing Time 10:45


1ITO Yasutaka, HATTORI Hitoshi,MIURA Kazuhiko

Sliding Surface Design Based on Coupled Analysis of Lubrication and Structure inRotary Compressor Mechanism

2TANAKA Yuya, ENDO M.,MORIYAMA S.

Fundamental Study on the Friction and Wear Properties in Cyclic ReciprocatingSliding Contact of Bearing Steel

3

AKAGAKI Tomoharu, KURAOKAYamato, TAKEO Fumio, FURUYAKazuyuki, KAWABATAMasahiko

Effects of PEEK's Surface Roughness on Seizure Behaviors of PEEK/Steel Pairsunder Oil-Lubricated Sliding Contacts

Track No. 10 Session Chair#3.Session Name Wear in Tribology 3 SASAKI Shinya, Prof., Tokyo Univ. of Science

Date 9/22 Thu. Session Co-ChairOpening Time 11:00 MIYAJIMA Toshiro, Lecturer, Toyama Pre. Univ.Closing Time 12:00


1SATO Tomohiro, JINGUAkihiro, MURAOKA Takehiro,SAITOH Ken-ichi

Effects of Mixing Conditions on Strength and Wear of Cu-Sn System Sintered inVacuum Atmosphere

2DOI Takayuki, ENOMOTOKazuki, USAMI Hatsuhiko

Effects of Lubricants and Micro Structure on the Tribological Behavior of PAIOverlays Containing MoS2

3TOIDA Masato, USAMIHatsuhiko

Tribological Properties of Micro Textured Surface Fabricated using MechanicalMeans Based on Plastic Deformation

4HIRAI Yoshimasa, SATOTomohiro, USAMI Hatsuhiko

Combined Effect of Penetrated Graphite and Dispersed Sulfide on the TribologicalProperties of Cast Bronze

Track10. Wear in Tribology organized by Prof. SASAKI

Track No. 11 Session Chair#1Session Name Biomaterial, Biomechanics 1 YAMAZAKI Yasuhiro, Prof., Niigata Institute of Technology



1KASAI Renta, SASAGAWAKazuhiko, FUJISAKI Kazuhiro

Development of Sensing System of Three-Axis Stress for Touch Panel Operation

2OHKI Motofumi, HOSODAKohei, SAITO Hiroshi

Tensile Adhesion Strength of Plasma-Sprayed Hydroxyapatite Coatings

3HAKOZAKI Yuki, OTSUKAYuichi, MIYASHITA Yukio,MUTOH Yoshiharu

Effects of Adhesives on Validity of Interfacial Strength of Plasma-SprayedHydroxyapatite Coating

4

MORAKUL Sarita, OTSUKAYuichi, OHNUMA Kiyoshi,TAGAYA Motohiro,MOTOTSUKA Satoshi,MIYASHITA Yukio, MUTOHYoshiharu

Antibacterial Evaluation of Fluorescent HAp Complex with Photocatalyst Coatingby Visible Light Irradiation

5OTSUKA Yuichi, KAGAYAKengo, MIYASHITA Yukio,MUTOH Yoshiharu

Effect of Wear/Delamination of Hydroxyapatite Coating on Loosening Behaviorsof Artificial Acetabular Cups

Track No. 11 Session Chair#2.Session Name Biomaterial, Biomechanics 2 OTSUKA Yuichi, Assoc. Prof., Nagaoka Univ. of Technology



1AOYAGI Naritoshi, MATSUYANobuhiko

Strength Characteristics of Porous Ti6Al4V Alloy for Biomaterials by Spark PlasmaSintering Technique

2OSAWA Takako, KIM Hyojin,MORI Hideyuki, MORIYAMAShigeaki

Topology Optimal Design of Artificial Hip Stem with the Macro-Heterostructure

3SAKURAI Kota, SASAGAWAKeisuke, ODA Masafumi, HARAToshiaki, NAKATA Katsuya

Relationship between the Shape and the Primary Stability for Artificial Hip Stem

4YAMAZAKI Yasuhiro, OHNONaoyuki, SONE Michiyoshi

Mechanical Properties of Biomedical Titanium Coating by Cold Spray Technique

Track11. Biomaterial, Biomechanics organized by Prof. YAMAZAKI

Track No. 12 Session Chair#1Session Name Light Metals and Alloys SUZUKI Mayumi, Assoc. Prof., Toyama Prefectural Univ.



1LEE Jungsub, PARK Sang-youn,CHOI Byoung-Ho

Modeling and Analysis of Compressive Behaviors of Three Dimensional AluminumFoams using Central Voronoi Tessellation

2WATANABE Ryota, SUZUKIMayumi

Effects of Kink Boundaries on Creep Strength and Deformation Microstructures ina Directionally Solidified Long-Period Stacking Ordered Mg-Zn-Y Alloy at 600K

3SUZUKI Mayumi, KONDOFumiki, YOSHIMI Kyosuke

Creep Deformation Behavior and Effects of Stacking Faults in Mg-Y Based Alloys

4LUAN Baifeng, WANG Kang, LUYifu, YANG Xiaofang, QIURisheng

Effect of Mo and Bi on the Microstructure and Mechanical Properties of Zr-Fe-Cr-xMo-yBi Alloys

Track 12 Light Metals and Alloys organized by Prof. KAMADO

Track No. 13 Session Chair#1Session Name Composite Materials 1 SHIMAMURA Yoshinobu, Prof., Shizuoka Univ.

Date 2016/9/19 Session Co-ChairOpening Time 14:30 SANADA Kazuyuki, Assoc. Prof., Toyama Prefectural Univ.Closing Time 16:00


1

SHIMAMURA Yoshinobu,KAMEI Toshiki, TOHGOKeiichiro, FUJII Tomoyuki,INOUE Yoku

Effect of Atmospheric Plasma Treatment on Interfacial Strength of CNT/EpoxyComposite

2NAGATA Kazuya, OKUDAShinichi, SANADA Kazuaki

Dispersion and Mechanical Properties of Hydrophobizing Agent-Treated CelluloseNano Fiber/Polyolefin Nanocomposites Fabricated by Melt-Compounding

3FUJISAKI Rikiya, SANADAKazuaki, SAGATA Kazuya

Self-Healing of Spread Carbon Fiber/Epoxy Laminates and Effect of Addition ofGraphenes on the Strength Recovery

4 YOSHIDA MasashiMechanical Properties of AlTi-TiB2 Composites with Sub-Micron Size of TiB2

Particles

5IWAO Masahiro, FUJIITomoyuki, TOHGO Keiichiro,SHIMAMURA Yoshinobu

Fabrication of Alumina-Titanium Composites by Spark Plasma Sintering and TheirMechanical Properties

6LIU Qiong, HUANG Guoqin, XUXipeng

Surface Forming Mechanism of Grinding C/SiC Composites

Track No. 13 Session Chair#2.Session Name Composite Materials 2 SANADA Kazuyuki, Assoc. Prof., Toyama Prefectural Univ.

Date 2016/9/20 Session Co-ChairOpening Time 9:15 SHIMAMURA Yoshinobu, Prof., Shizuoka Univ.Closing Time 10:30


1NAKADA Masayuki, MIYANOYasushi

Influence of Water Absorption on Long-term Strengths in Various Directions ofUnidirectional CFRP for Marine Use

2MIZUMOTO Kazuya, SANADAKazuaki, KAWAGOE Makoto,MIZUBAYASHI Mai

Notched Three-Point Bend Testing of the Injection-Molded Glass Fiber/Polyamide66 Composites and the Effect of Loading Rate on the Fracture Properties

3

KANESAKI Manato, TANAKAMototsugu, SATIO Hiroshi,UZAWA Kiyoshi, HOJO Masaki,KIMPARA Isao

Experimental Evaluation of Interlaminar Shear Strength in Region of RepairedDelamination by Thermal Fusion Bonding in CP/PA6 Laminates

4SHI Duoqi, TENG Xuefeng, LYUShuangqi, YANG Xiaoguang

Mechanical Behaviors of Fiber Reinforced Aerogel Composites

5SHIIHARA Yoshinori, TANAKAShoki, YOSHIKAWA Nobuhiro

Peridynamic Simulation of Interface Fracture between Carbon Fiber and Resin

Track No. 13 Session Chair#3.Session Name Composite Materials 3 SHIMAMURA Yoshinobu, Prof., Shizuoka Univ.

Date 2016/9/20 Session Co-ChairOpening Time 10:45 SANADA Kazuyuki, Assoc. Prof., Toyama Prefectural Univ.Closing Time 12:00


1MURAMATSU Hoshihiko,MATSUDA Shinya, YASHIROShigeki, OGI Keiji

Compressive Strength and Fractography of CFRP Laminates after Piercing Processby Punch Press

Track13. Composite Materials organized by Assoc. Prof. SHIMAMURA

2

MIURA Kazuhiro, SATOYukihiro, KASHIWAGIMasahiro, ESAKI Kouji, SUHARAMasayoshi, NONAKA Yoshinori

Progressive Failure Analysis for Open-Hole-Compression of Composite LaminatesConsidering a Fiber Kink Failure

3

SATO Yukihiro, MIURAKazuhiro, KASHIWAGIMasahiro, SUHARA Masayoshi,NONAKA Yoshinori, ESAKIKouji

Progressive Failure Analysis for Impact Damage and Compressive Strength ofComposite Laminates

4TAKEMOTO Shinichiro,YOSHIKAWA Nobuhiro

Fracture Evaluation using Mesoscale Model for Filament Wound CFRP Structure

5YOSHIKAWA Nobuhiro,HARIYA Kohta

Geometry-Based Algorithm for Evaluating Strain Distribution in Carbon Fiber-Reinforced Plastic Pressure Vessel

Track No. 14 Session Chair#1Session Name Adhesion, Adhesive, Bonding 1 ODA Kazuhiro, Prof., Oita Univ.



1NISHIMURA Takuya, ODAKazuhiro, TSUTSUMI Noriko

Singular Stress Field of Small Edge Interface Crack in Adhesively Bonded Jointunder Thermal Residual Stress

2HOSOKAWA Yusuke, HU Kejun,NODA Nao-aki, SANOYoshikazu

Evaluation of the Interface Strength for Hot Strip Bimetallic Roll during theDifferent Quenching Processes

3TABE Naoyuki, ODA Kazuhiro,TSUTSUMI Noriko

Strength Evaluation of Sharp Notched Plate under Large Scale Yielding Condition

4 MASUDA Kenichi Compression and Recovery Property for Straight-Arc Sectioned Metal Gaskets

Track No. 14 Session Chair#2.Session Name Adhesion, Adhesive, Bonding 2 MASUDA Kenichi, Lecturer, Toyama Univ.



1ODA Kazuhiro, OKAZAKINaoya, TAKAHATA Yosuke,TSUTSUMI Noriko

Relation between Intensity of Singular Stress at Interface Edge and Stress IntensityFactor of Small Edge Interface Crack in Butt Joint

2WANG Po-Hoa, LIU Chang-Wei,HUA Chi-An, CHIU Tz-Cheng

Analysis of Interlaminar Edge Crack in Orthotropic Beam under Mixed-ModeLoading

3NODA Nao-Aki, LI Rong, SANOYoshikazu, MIYAZAKI Tatsujiro,IIDA Kazuki, TAKASE Yasushi

Suitable Testing Method to Evaluate Adhesive Strength of Single Lap Joint underShear

Track14. Adhesion, Adhesive, Bonding organized by Prof. NODA

Track No. 15 Session Chair#1Session Name Welding, Joint_FSW HASHIMURA Shinji, Prof., Shibaura Institute of Technology



1ITO Atsushi, YASUI Toshiaki,FUKUMOTO Masahiro

Influence of Welding Tool Shape on Material Flow of Friction Stir Welding ofAluminum Alloy and Steel

2

UEMATSU Yoshihiko, KAKIUCHIToshifumi, MIZUTANI Yoshiki,ISHIDA Yuta, FUKUNAGAKatsutoshi

Fatigue Behavior of Dissimilar Friction Stir Welds between Wrought A6016 andCast ADC12 Aluminum Alloys

3OKANE Masaki, SHIMIZUTakaaki, YASUI Toshiaki,FUKUMOTO Masahiro

Mechanical Factors Influencing Fatigue Behavior of A5052/SPC270C Joints byFriction Stir Spot Welding

4KURABE Yohei, YAMADAShinya, KATO Toru

Relationship between the Strength of SPHC/PET Friction Heating Joint andDistribution of Bubbles

Track No. 15 Session Chair#2.Session Name Welding, Joint Welding MIYASHITA Yukio, Assoc. Prof., Nagaoka Univ. of Technology



1PARK Won Dong, BAHN ChiBum, KIM Ji Hun

A Parametric Study on Welding Process Simulation for Multi-pass Welds in a Plate

2YAMAMOTO Yuki, IYOTAMuneyoshi, MOCHIZUKIMasahito

A Study on Improvement of Joint Strength by Ni Addition to Resistance SpotWelds

3

NAGASAKA Akihiko, KITAHARAYu, NAITO Junya, CHINZEIShota, IBANO Akira, HOJOTomohiko, HANAOKA Shinya,HORIGUCHI Katsumi,NAGASAKA Koki

Spot Weldability in Automobile Ultrahigh Strength Hot Stamping Steel Sheet

4CHOI Kyoung Joon, YOO SeungChang, KIM Taeho, HAMJunhyuk, KIM Ji Hyun

Thermally Aging Effects on Stress Corrosion Cracking in Fusion Boundary betweenLow-alloy Steel and Ni-base Weld Metal


#3.Session Name Welding, Joint Mechanical Joining,Soldering and Other Joining

YASUI Toshiaki, Prof., Toyohashi Univ. of Technology



1HASHIMURA Shinji, MAEKAWAJyunpei

A Relationship between Grip Length and Fatigue Morphology in Bolted Jointsunder Transverse Vibration

2HARUBEPPU Yu, TANIE Hisashi,SASAKI Koji, CHIWATANobuhiko, TESHIMA Hiroyuki

Thermal Deformation Mechanism of Ceramic Substrate with Thick Cu Layer forPower Semiconductor Modules

3TIAN Jun, DAI Pinqiang, LIXiaojun, WANG Haiyan

Effects of Ni on Microstructure and Properties of Zn20Sn High-Temperature Lead-Free Solders

4MIYASHITA Yukio, OSANAIShota, KURABE Yohei, OTSUKAYuichi

Evaluation of Strength in Dissimilar Materials Joint between Plastic and MetallicMaterials with Surface Modified

Track15. Welding, Joint organized by Assoc. Prof. MIYASHITA

Track No. 16 Session Chair#1Session Name New Performance and Reliability GIZYNSKI Maciej, Dr., National Institute for Materials Science

Date 9/19 Mon. Session Co-ChairOpening Time 16:30 OKAZAKI Msakazu, Prof., Nagaoka Univ. of TechnologyClosing Time 17:30


1SAKAKI Kazuhiko, ARAI Shinji,TAGAMI Tatsuyuki

Influence of Position of Spray Pattern on Calculated Results of Gas Stream andCopper Particle with the Rectangular Cross-Section Nozzle of High-Pressure ColdSpraying

2SUIDZU Tatsuo, NISHIZAKOSyun, ARAI Masayuki

High Temperature Oxidation Properties of Atmospheric Plasma SprayedCoNiCrAlY Coatings

3YANG Hejie, GAO Yimin, SUNLiqiu, QIN Weichao

Corrosion Behaviors of Electroless Plating Ni-P Coatings in Flue Gas Condensate

4NAKAMURA Masashi,TAKAMORI Yuki, IWAMOTOYuma

Wear and Friction Characteristics of AlN/AlCrN Hybrid Coatings on AluminumAlloy

Track No. 16 Session Chair#2.Session Name Interfaces of Coatings YANG Hejie, Prof., Xi'an Jiaotong Univ.

Date 9/20 Tue. Session Co-ChairOpening Time 9:15 ARAI Masayuki, Prof., Tokyo Univ. of ScienceClosing Time 10:30


1SHIMA Takashi, ARAI Masayuki,KANNNO Akihiro, SUIDZUTatsuo

Proposal of Interfacial Roughness Parameter based upon Discrete Fourier Series

2OMIYA Masaki, ROCHESThibaud Vermot des

Analysis of Essential Work of Fracture on Polymer Thin Films

3LIU Gang, WU Kai, GAO Lin,SUN Jun

Buckling Behaviors and Adhesion Energy of Polymer-supported NanostructuredCu/X (X = Nb, Zr) Multilayer Films

4 KAWAI Tomoki, OMIYA MasakiInfluence of Electrode Young's Modulus on Deformation Behaviors of IonicPolymer Metal Composite Actuator with Palladium Electrodes

5HAMADA Taisuke, ISHIGAKISeigo, ARAI Masayuki

Particle Impact Damage in Thermal Barrier Coatings

Track No. 16 Session Chair#3.Session Name Thermal Barrier Coatings LIU Gang, Prof., Xi'an Jiaotong Univ.

Date 9/20 Tue. Session Co-ChairOpening Time 10:45 OMIYA Masaki, Prof., Keio Univ.Closing Time 12:00


1

GIZYNSKI Maciej, XIAOLONGChen, ARAKI Hiroshi,WATANABE Makoto, KURODASeiji, PAKIELA Zbigniew

Mechanical Properties Affecting Reliability of TBC Systems Deposited byAtmospheric and Suspension Plasma Spraying

2 ARAI Masayuki, SHIMIZU YutoDamage-coupled Inelastic Deformation Analysis of Thermal Barrier CoatingsSubjected to a Tensile Load

3YONAGUNI Yuuki, OKAZAKIMasakazu, YAMAGISHI Satoshi

Non-Steady State Thermo-Mechanical Fatigue Behavior of a Thermal Barrier CotedSuperalloy Specimen

4

KATO Masahiko, MATSUOYuuki, WAKI Hiroyuki,TAKAHASHI Satoru, AKEBONOHiroyuki, SUGETA Atsushi,KOJIMA Yoshitaka, ONO Fumio

Influence of Specimen Twisting on Young's Modulus of Thermal Barrier CoatingsMeasured by Four-Point Bending Test

Track16. Coating, Thin Films organized by Prof. OKAZAKI

5

YAMAGISHI Satoshi, HAYASHIYuki, LOKACHARI Siddharth,OKAZAKI Masakazu,FUKANUMA Hirotaka

Influence of CMAS (CaO-MgO-Al2O3-SiO2) Infiltration on the Stress State inThermal Barrier Coatings for Gas Turbine

Track No. 17 Session Chair#1Session Name Micromechanics HIRAKATA Hiroyuki, Assoc. Prof., Osaka Univ.



1 KOBAYASHI ShigeakimMicrostructure Dependence of Abrasive Wear Behavior in ElectrodepositedUltrafine-Grained Ni-4.4 mass% P Alloy

2KINOSHITA Keisuke, NIIYAMATomoaki, SHIMOKAWATomotsugu

Influence of Annealing on Dislocation Emission from Non-equilibrium GrainBoundaries

3HAGIWARA Hiroyuki, KANEKOYoshihisa, UCHIDA Makoto

Strengthening in Electrodeposited Co-Cu Alloy Film having High CompositionGradient

4

TERANISHI Masaki,MATSUMURA Keigo, GENNAIShota, KUWAZURU Osamu,KOBAYASHI Masakazu, TODAHiroyuki

Image-Based Finite Element Elasto-plastic Analysis of Cast Aluminum AlloyIncluding Si Particles and Intermetallic Compounds

5UCHIDA Makoto, SHINNOYousuke, ASANO Hitoshi,KANEKO Yoshihisa

Effect of Thermal History on the Microstructure and Inelastic DeformationBehavior of Polypropylene Film

Track No. 17 Session Chair#2.Session Name Deformation and Fracture 1 KANEKO Yoshihisa, Prof., Osaka City Univ.



1KOSAI Koji, HUANG Hu, YANJiwang

Comparative Analysis of Phase Transformation Behaviors in Single-crystal Geunder Single and Double Cyclic Nanoindentation Tests

2SUMIGAWA Takashi,MATSUMOTO Kenta,KITAMURA Takayuki

Strain Localization in Polycrystalline Nano-copper Sandwiched between DissimilarMaterials under Fully-reversed Loading

3

TAKAHASHI Yoshimasa,AIHARA Kazuya, ASHIDA Itaru,TAKUMA Masanori, SAITOHKenichi, SATO Tomohiro,HIGUCHI Kimitaka,YAMAMOTO Yuta, ARAIShigeo, MUTO Shunsuke

Effect of Hydrogen on Interfacial Fracture Strength Property of Micro-scaleSiN/Cu Components

4KONDO Toshiyuki, BI Xiaochen,HIRASAKA Hiroyuki,MINOSHIMA Kohji

Mechanisms of Fatigue Crack Initiation in Copper Submicron Films

Track No. 17 Session Chair#3.Session Name Fatigue SUMIGAWA Takashi, Assoc. Prof., Kyoto Univ.



1MAO Miaodong, ZHANGXiancheng

The Effects of Ultrasonic Surface Deep Rolling on Surface Integrity and FatigueStrength of Ti-6Al-4V

2

KANEKO Yoshihisa, TADAItsuki, KOBAYASHI Haruki,UCHIDA Makoto,VINOGRADOV Alexei

Low-Cycle Fatigue Property of the UFG Nickel Processed by ECAP

Track17. Micro/Nano Mechanics organized by Prof. HIRAKATA

3

GENNAI Shota, TERANISHIMasaki, KUWAZURU Osamu,KOBAYASHI Masakazu, TODAHiroyuki

Relationship between Microscopic Fatigue Life of Inclusions and Its GeometricalProperty in Cast Aluminum Alloys

Track No. 17 Session Chair#4.Session Name Deformation and Fracture 2 TAKAHASHI Yoshimasa, Assoc. Prof., Kansai Univ.



1HIRAKATA Hiroyuki, YOSHIDATakuya, KONDO Toshiyuki,MINOSHIMA Kohji

Effects of Film Thickness on Fracture Toughness in Single-crystalline andPolycrystalline Submicron Cu Films

2

KOTOGE Ryota, KAMEYAMATakumi, HIRAKATA Hiroyuki,KONDO Toshiyuki, SAKIHARAMasayuki, MINISHIMA Kohji

Thickness Effect on Creep Crack Propagation Properties of Freestanding GoldSubmicron Films

3CHEN Shaoguang, SUMIGAWATakashi, YUKISHITA Tetsuya,KITAMURA Takayuki

In situ Observation of Tensile Behavior in a Single Silicon Nanospring

4SHIMADA Takahiro, OZAKINaoki, OUCHI Kenji, CHIHARAYuu, KITAMURA Takayuki

Breakdown of Linear Elastic Fracture Mechanics in Silicon Nano-components

5 TSUGE Yota, AOYAGI YoshiteruMolecular Dynamics Simulation on Microscopic Plastic Deformation Behavior ofCrystalline Phase of Polypropylene

Track No. 17 Session Chair#5.Session Name Multiphysics HIRAKATA Hiroyuki, Assoc. Prof., Osaka Univ.



1XU Tao, SHIMADA Takahiro,ARAKI Yasumitsu, WANG Jie,KITAMURA Takayuki

Domain Walls-defect Engineering for Multiferroic Atomic Layers in FerroelectricPbTiO3

2LE Van Lich, SHIMADATakahiro, KITAMURA Takayuki

Unusual Toughening in Nanoscale SrTiO3 Originating from Strain-inducedFerroelectricity

3MINEGISHI Akiko, OKADATakumi, KANDA Masae, JIMBOItaru, NISHI Yoshitake

Improvement of CFRP/Metals treated by Homogeneous Low Energy ElectronBeam Irradiation (HLEBI) Prior to Hot-Pressing

4

TAKASE Sagiri, YAGI Arata,KUBO Chisato, KANDA Masae,MATSUMURA Yoshihito, NISHIYoshitake

Effects of Electron Beam Irradiation on Adhesion of Laminated Sheets with ActivePET and Inactive Other Polymers

5TAKAHASHI Anna, NOMURARyo, MATSUMURA Yoshihito,NISHI Yoshitake

Effects of Electron Beam Irradiation on the Deformation Resistivity forTransparent Polymers

6

NISHI Yoshitake, HASEGAWAHitoki, INUI Shigehito,SHIRAISHI Kazuma, ISHII Sho,MIWA Noriyoshi, IWATAKeisuke, MATSUMURAYoshihito, FAUDREE C. Michael

Universal Joints of Metals/Polymers


#1Session NameSmart Material and Structures,

Health MonitoringASANUMA Hiroshi, Prof., Chiba Univ.



1MATSUSHITA Mutsuki, MORINaoki, BIWA Shiro

Three-Dimensional Analysis of Lamb Wave Propagation in a Plate with a Crack bythe Spectral Element Method

2HORIBE Tadashi, HONDATakuya, MORI Kotaro

Crack Identification in a Shaft by Response Surface Method

3TAKEDA Kohei, MATSUIRyosuke, TOBUSHI Hisaaki

Bending Fatigue Properties of Shot-Peened and Ion-Implanted TiNi ShapeMemory Alloy

4TOKUNAGA Hitoo, YOSHIOKAHideki

Shape Memory Behavior and Compositional Dependence of Zr-Cu System Alloy

5 UDA KazufumiAn Example of Development of Personal Green Mobility (PGM) Tricycle usingBamboo and Corrugated Fiber Board

Track18. Smart Material and Structures, Health Monitoring organized by Prof. ASANUMA


#1Session NameImpact Problem, Dynamic

Problem 1KOBAYASHI Hidetoshi, Prof., Osaka Univ.



1KITA Akihiro, OMIYA Masaki,OTA Shunpei, KOMOTORI Jun

Measurement of Dynamic Mechanical Properties by Collision of Hard Particles

2OZAWA Takeru, ADACHITadaharu, WITONO Hardi

Effect of Filling Rubber on Impact Energy Absorption of a Thin-Walled CylinderSubjected to Low-Velocity Axial Impact

3

NOGAMI Taichi, ADACHITadaharu, TAKEO Kyohei,KORETOH Ryohei, TADAHitoshi

Measuring Dynamic Compressive Behaviors of Thin Acrylic Foam Films due toDrop Weight Test

4

MURAKAMI Tomoya,NISHIKAWA Masashi,MIYAKAWA Yutaka, SUZUKIShinichi

Effect of Measurement Limit on Cumulative Mass Distribution of FragmentsGenerated by Impact Fracture


#2.Session NameImpact Problem, Dynamic

Problem 2ADACHI Tadaharu, Prof., Toyohashi Univ. of Technology



1MAO Pingli, XU Jialu, ZHANGFeng, LIU Zheng

Adiabatic Shear Bands in Magnesium Alloys

2

HIGUCHI Masahiro, ODAAtsuto, MATSUI Toshiaki,NAKAMOTO Takahiko,TACHIYA Hiroshi

Development of Flexible Protector Hardening under Impact

3

SEO Yuya, TANIGAKI Kenichi,HORIKAWA Keitaro,KOBAYASHI Hidetoshi, OGAWAKinya

Examination of Resistant Method of Reflected Wave in Elastic Body

4NIU Li-Sha, LIN En-Qiang, SHIHui-Ji

Effects of Orientation and Vacancy Defects on the Shock Behavior of Single CrystalCopper

Track19. Impact Problem, Dynamic Problem organized by Prof. KOBAYASHI


#1Session NameViscoelastic Materials, PolymerMaterials, 3D Printable

MURASAWA Go, Assoc. Prof., Yamagata Univ.;

Date 19Mon. Session Co-ChairOpening Time 14:30 YONEYAMA Satoshi, Prof., Aoyama Gakuin Univ.Closing Time 16:00


1

TAKEI Satoshi, HANABATAMakoto, OSHIMA Akihiro,KASHIWAKURA Miki, ITO Shoji,KOZAWA Takahiro, TAGAWASeiichi, MIYASAKA Hiroshi

Water-Soluble Resist Polymers in Eco-Friendly Electron Beam Lithography

2

NAKAJIMA Shinya, TAKEISatoshi, HANABATA Makoto,MATSUMOTO Yoko, SEKIGUCHIAtsushi

Fundamental Study of Inedible Cellulose-based Polymer for Disposable ThermalCrosslinkable Template in Micro-imprint Lithography

3XIAO Yang, CHEN Yanqin,JIANG Chao, CHO Chongdu

On Tensile Behavior of Polymer Membranes in Fuel Cells

4TSUCHIHASHI Ken, YONEYAMAS.

Evaluating Viscoelastic Properties under High Strain Rate using Split HopkinsonPressure Bar Method

5 OKUBO Shin, MURASAWA Go Metal Thin Film Fabrication using Ultra-Sonic Mist for Printing Technology

6TAKEDA Kohei, HAYASHIShunichi, UEKI Kazunori

Deformation Properties of Shape Memory Polymer Made by 3D Printer

Track20. Viscoelastic Materials, Polymer Materials, 3D Printable Materials organized by Prof. FURUKAWA


#1Session NameModelling and Characterization ofMaterials with Microstructures or ISHIHARA Masayuki, Prof., Osaka Prefecture Univ.

Date 9/20 Tue. Session Co-ChairOpening Time 13:30 KAWAMURA Ryuusuke, Prof., Univ. of MiyazakiClosing Time 14:30


1FUSHIMI Shugo, IIO Shouichi,YONEZU Akio

Experimental and Numerical Investigations of Anisotropic Deformation Behaviorof Low-density Polymeric Foams

2YASUDA Yusuke, KINOSHITAHiroyuki, KAWAMURARyuusuke

Evaluation by using Finite Thermal Analysis of Performance in Decreasing SurfaceTemperature Rise of a Porous Glass Fiber Reinforced Ceramic Block Allowed toAbsorb Water Subjected to Radiation Heating

3SASAKI Daisuke, KOYAMAMotomichi, NOGUCHI Hiroshi

Mechanics-Guided Design of Microstructure toward Suppression of Hydrogen-assisted Fatigue Crack Growth: Example of a Pearlite Effect on Stress Re-Distribution at a Crack Tip

4ISHIHARA Masayuki, OOTAOYoshihiro, KAMEO Yoshitaka

Electroelastic Field in a Piezoelectric Cylinder with D∞ Symmetry Subjected toMechanical Torsion


#2.Session Name Fabrication, Evaluation andAnalysis of Functionally Grade

NARITA Fumio, Prof., Tohoku Univ.

Date 9/20 Tue. Session Co-ChairOpening Time 14:45 ISHIHARA Masayuki, Prof., Osaka Prefecture Univ.Closing Time 15:30


1LEE Kangil, SATO Kazuto,OGAWA Kazuhiro

Development of Functionally Graded Thermal Barrier Coatings

2SUZUKI Koji, TAKEHARAKazuki, MATSUI Ryosuke, KATOAkira

Analysis of Strain Distribution using Digital Image Correlation Method inFunctionally Graded Shape Memory Alloy

3KAWAMURA Ryuusuke,TANIGAWA Yoshinobu

Plane Axisymmetric Transient Thermal Stress in an Inhomogeneous HollowCircular Cylinder due to Cyclic Heating

Track21. Functionally Graded Materials, Heterogeneous Materials, Anisotropic Materialsorganized by Prof. KAWAMURA


#1Session NameElectronic and Photonic

Packages 1MIURA Hideo, Prof., Tohoku Univ.



1LI Yuan, NAKAJIMA Takashi,SAKA Masumi

Study on Fabrication of Ag Nanodendrites by Utilizing Ionic Migration

2LIU Jiatong, SUZUKI Ken,MIURA Hideo

Minimization of the Residual Stress Around TSV Structures by Controlling MicroTexture of Electroplated Copper Thin Film

3SASAKI Shinichirou, YANGMeng, SUZUKI Ken, MIURAHideo

Graphene Nano-Ribbon-base Strain Sensor on a Flexible Substrate

4KATO Takeru, SUZUKI Ken,MIURA Hideo

Micro-Texture-Controlled Highly Reliable Copper Thin-Film Interconnections


#2Session NameElectronic and Photonic

Packages 2MIURA Hideo, Prof., Tohoku Univ.



1KITADA Yu, FUJINO Yuya,KAWAKAMI Takashi,KINOSHITA Takahiro

A Study on the Relationship between Strain Rate and Fatigue Life for Lead-freeSolder Material from the View Point of Fatigue and Creep Damages

2KOUSAKA Tasuku, FUJINOYuya, KAWAKAMI Takashi,KINOSHITA Takahiro

A Study on Low Fatigue Strength for Lead-Free Solder Material with V ShapeNotch

3

YAMADA Yoji, SAYAMAToshihiko, TSURITANI Hiroyuki,OKAMOTO Yoshiyuki,KINOSHITA Masayoshi, MORITakao

Evaluation of Strain-Rate Effect on Fatigue Lifetime of Solder Joints by using Lap-joint Shear Specimen with High-Stiffness Fixtures

Track22. Electronic and Photonic Packages organized by Prof. MIURA


#1Session NameMaterials in Next-Generation

Energy SystemsARAKI Wakako, Assoc. Prof., Saitama Univ.



1ARAI Yoshio, KASAI Yuta,ARAKI Wakao

Effect of Thermal Load on Power Generating Efficiency of a Single-CrystallineSilicon Solar Module

2

KIMURA Yuta, FUNAYAMA K.,FAKKAO M., NAKAMURA T.,KUWATA N., KAWADA T.,KAWAMURA J., AMEZAWA K.

Evaluation of Chemo-Mechanical Coupling Effect in All-Solid-State Lithium-IonBattery Cathodes

3

KISHIMOTO Yoshinao,KOBAYASHI Yukiyoshi,OHTSUKA Toshihisa, TOGOTakahito

Limitation of Estimation Method of Current Density in High Capacitance Batteryby Inverse Analysis of Magnetic Field

4 KUWATA Naoaki Degradation of Li-ion Battery Materials Studied by In-situ Acoustic Emission

5SATO Kazuhisa, MIYASAKATaihei, SUMI Hirofumi,HASHIDA Toshiyuki

Deformation Behaviors of Ni-YSZ under SOFCs Simulated Operating Conditions

6ISLAM Nurul Md., ARAKIWakako, ARAI Yoshio

Temperature and Loading Rate Dependence of Ferroelasticity of LaAlO3

Track23. Materials in Next-Generation Energy Systems organized by Assoc. Prof. ARAKI

track 1. stress-strain analysis organized by prof....

Documents