tran tieu phi (sophie) 57090 sketchbook

AIR

sTUDIO

2015_S1_5SOPHIE TRAN

570960

TASK 1

5 versions of lofting with 2 curves



When more curves are added as input, the form of lofting become more complex. This create interesting geometry.

TASK 2

Reverse engineer a project Voussoir Cloud by Iwamoto Scott

By watching the tutorials video online, I learned the finding form of Voussoir Cloud using grasshopper, I also learned another useful plug-in in grasshopper called Kangaroo. This plug-in uses the basic ideas of forces and applies tension and compression onto a surface to create interesting form of parametric model. The designer will use the focus to determine the form of the surface by using different focus.

Algorithmic sketchbook WEEK 1

3

I started to play with the new plug-in and explore more on it. by changing the size of the bases and the height of it.

GRASSHOPPER DEVELOPMENT

WITH KANGAROO PLUG-IN

At the end, I applied UForce of Kangaroo to change the form of the shape and create a Voussoir Cloud. However, the form did not turn out to be the form I wanted so I developed a new grasshopper file to test the form but using different definition.

5


EXPLORATION

The previous form of Voussoir Cloud was not the form I wanted to develop as the force broke the form of the vous-

soir, especially the edges of the voussoir. So I played with the Kangaroo plug-in and developed a more successful result by changing the form of the voussoir and more UForce was ap-plied to pull up the whole structure and create the true form

of voussoir.

The definition creates this form is really interesting and powerful as it can generate a new form of paramatric model from a surface (see picture below)


7

Undulating Ground Surface

I tried to used the morphbox tool to create a surface with breps or meshes lay over it. I also developed a definition

which I can use change the shapes of the breps and meshes on the surface. Grasshopper allowed me to lay a mesh along a surface which is powerful than others program as it will take

a long time to copy and edit each mesh on the surface.


9

Mesh Geometry


11

The shapes of these patterns are polygon and I can work as a model display shelf inside gallery as models can be

placed into the tunnels of polygon

Patterning List

A pattern list algorithm which I created from a list of point that was extracted from a picture. However, I cropped and only

used a part of the picture to create the pattern. Finally, I baked the patterned and extruded them in many different ways.


13

The image and algorithm are changed to create new pattern in the definition.

Patterning List

The shapes of these patterns are hẽexagon.By changing the pattern list algorithm into hexagon I can

create a new pattern list


15

This can be a table which is inserted into the floor and model can be displayed on top. Lighting can be installed at the bottom which create interesting lighting effect on

the model

Strings attacted to the ceiling.

Patterning List

By changing the shapes I can create a new model shelf dis-play design.

The cylinder tunnels can be hanged from the roof and models can be displayed inside the tunnels.


17

Fabrication

The joint detailing is designed between adjacent elements to create a shelf for model displaying, at the end of semester

exhibition in the Ceres Gallery. The open cylinders are at-tached to strings at each end which connect to the ceiling. This creates flexible for the cylinders as it can be attached

anywhere in the gallery space. Also, the cylinders merged into each others which creates many interesting patterns. In addi-

tional, lights can be installed along the walls that creates light-ing effect through the tunnels.


19

Understanding Relationship


21

Fractal Geometry

The fractal definition allows me to explore the surface of a mesh and breaks it into different shapes. I then take the shapes

and mirror as well as orient them to create new mesh. This process allows me to create a new space with fractal or a

sculpture by connect the fractal together as a whole.


23

I further explore the definition by changing the shape of poly-gon (number of sides) to change the fractal shapes. This

shows me the variation of fractal from one definition.

25

I further explore the definition by placing the fractals at differ-ent angles and connect them together to create interesting

sculpture.

I further developed the definition by changing the brep by a box and create fractals from the box rather than the polygon.

27

Biomimetic Architecture

From the definition, I changed the number such as radius as well as number of branches. This shows me the variation of

definition by just changing a few number


29

Biomimetic Architecture

I tried the sea urchin grasshopper file and try to change the number, however, I want to do something different so I tried to

apply the pattern onto a sphere instead a cone. The pattern turned out to be interesting as the sphere create a complete

form for the pattern.


31

The Field

I tried to change the charges and line direction to change the colours on the map and understand how the field work. The charges move the contour forward or outward that creates

interesting patterns.


33

The Field

From the exploration from activities of the field, I understand the field better so I decided to explore more on how we can

apply the fields in design. I watched another tutorial on field development. The definition is calculation of points on lines and those points create field in negative charges. So all the

lines are drawn away from the circle near the charges.


35

tran tieu phi (sophie) 57090 sketchbook

Documents