TreLytics Confidential Nov. 2008

PO box 19135 Austin, TX 78760 Phone: 512.804.0700 - Fax: 512.804.0900

www.trelytics.com

TT RERE LL YTICS YTICS II NLINE NLINE UU LTRASONIC LTRASONIC DD ENSITY ENSITY AA NALYZERNALYZER SS FOR FOR SS LURRIESLURRIES

BB ASIC ASIC FF EATURES AND EATURES AND BB ENEFITSENEFITS ::

• Easy to install – ANSI 1” to any dimension of flange type required • Medium-independent density measurement • Fully inline, zero intrusion • Wettable materials are PEEK, PFA, PVDF or PE • Very insensitive to gas bubbles

HH OW IT OW IT WW ORKSORKS :: The Ultrasonic Density Analyzer uses a completely new and proprietary technology to measure the density in any diameter pipe or tank, using only one, non-intrusive ultrasonic sensor. This extremely reliable technology is available to measure slurry and suspension density in an inline manner, and with a minimum of installation and maintenance effort. This means that inline slurry monitoring is now feasible without the drawbacks of other inline density measurement methods, like nuclear and microwave systems.

Product Description – The Ultrasonic Technology Analyzer is a non-intrusive inline density meter that is suitable for measuring the density of slurries, even in applications where it is impossible to transmit ultrasonic sound through the medium. In applications where it is possible to transmit the ultrasound through the medium it is also possible to measure dissolved components. The temperature is also measured with ultrasonic technology.

TreLytics Confidential Nov. 2008

PO box 19135 Austin, TX 78760 Phone: 512.804.0700 - Fax: 512.804.0900

www.trelytics.com

The Ultrasonic Density Analyzer uses only one, simple to install, flush mounted sensor, which can be installed in a tank or in an existing pipeline, or supplied with our UFTC Full Bore Flow-Through cells. The abrasive and corrosion resistant sensor material (PFA, PVDF, PEEK or PE) protects the internal elements that transmit and receive a broad spectrum of ultrasonic sound waves. Through the interaction of the sound between the contact surface and the fluid to be measured, the Ultrasonic Density Analyzer derives a complete image of the slurry density, without the need for the sound to pass through the fluid. From the imaged spectra, the system derives the density of the water based slurry, regardless of composition, particle size and other properties of the particles.

UU LTRASONIC LTRASONIC DD ENSITY ENSITY AA NALYZER NALYZER I I :I I : The basic Ultrasonic Density Analyzer measures just the density of the slurry. If you are also interested in measuring the total suspended solids (TSS), the total dissolved solids (TDS), or both independently, that is also possible. The Ultrasonic Density Analyzer II employs a triple hybrid ultrasonic sensor technology that measures all essential information of the slurry or emulsion, including TDS, TSS, density and the temperature.

AA DDED DDED FF EATURES AND EATURES AND BB ENEFITSENEFITS ::

• Total Dissolved Solids (TDS) from 0 to 50 wt% * • Total Suspended Solids (TSS) from 0 to 50 wt% * • Total Density in SGx1000 units from <1000 to 1800 • Emulsion concentration * • Temperature

* depending and to be specified upon diameter and slurry/emulsion type The sensor is supplied as a flow-through sensor, available in diameters ranging from 1” to 3” (for other sizes please contact us). The robust design of the sensor is realized through special sensor elements using an abrasive resistant buffer material which is integrated in the flow-through cell providing a full-bore, zero-intrusive sensing system. The maximum pressure rating is 40 bars. The maximum temperature rating is 90 deg C for standard sensors, with 150 deg C sensors are available as an option.

TreLytics Confidential Nov. 2008

PO box 19135 Austin, TX 78760 Phone: 512.804.0700 - Fax: 512.804.0900

www.trelytics.com

SS PECIFICATIONSPECIFICATIONS ::

Method Hybrid Ultrasonic Spectroscopy Density Range Auto ranging 500 to 3000 g/l Readout Density, Temperature, SG Temperature -10 to 150 deg C Accuracy +/- 1 g/l (0.1 g/l resolution) Response Time <1 to 60 s (adjustable) Analog Outputs (2x) 4-20 mA (+/- 0.02%) Alarm Outputs (2x) SPDT, Hi-Hi, Lo-Lo RS232 Output Modbus through RS-232 Ethernet TCP/IP Option (through web server) Other Options Profibus, DP, Hart, PC link Data Logging 1 year via USB memory stick Housing /WPF Painted steel IP65, 300 x 320 x 120 mm

/SPLT Split type for customer casing /PAN Panel Mount

Terminal /MD 5, 7” Monochrome Touch Screen /CD 5, 7” Color Touch Screen

Power /VAC 90-240 VAC, 10W /VDC 24 VDC, 10W

Probe UFTW Probe UMCS

Flow-through, Full-Bore Wafer Sensor, 1-3” PEEK probe w/flange, for installation in pipe/tank, optional with weld adaptor kit

Cable /ST Standard cable, 7 mm, <150 m /HD Heavy duty cable < 150 m