tri n lÃm cÔng nghi p h tr vi t nam - nh t b n · vn 04 bac viet technology jsc 71 vn 05 binh...
TRANSCRIPT
TRIỂN LÃM
CÔNG NGHIỆP HỖ TRỢ VIỆT NAM - NHẬT BẢN LẦN THỨ 6 TẠI HÀ NỘI
EXHIBITOR DIRECTORY
第6回ハノイ部品調達展示商談会
10 - 12 September 2015Cultural Palace - Hanoi, Vietnam
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
MESSAGE FROM ORGANIZERSVietnam – Japan relationship has reached great achievements in terms of FDI. Japan ranks first among the countries and regions who have the largest implemented investment capital in Vietnam. As of June 2015, number of projects from Japan investing into Vietnam was 2,661 with total of registered investment capital was over USD37.7 billion, and the implemented investment capital attained about USD 12.1 billion. A large number of Japanese companies, particularly the ones operating in Japan and China when being asked by the survey conducted by JETRO out of November last year replied that they wanted to expand their production in Vietnam. Vietnam has been still evaluated as a significant production base and an attractive market by Japanese investors so far.
On the other hands, according to JETRO’s survey on Japanese-affiliated companies in Asia and Oceania in 2014, the procurement rate of raw materials and parts, components by Japanese companies in Vietnam was only 33.2%. It was not so high in comparison with this figure in other neighboring countries such as 40.7% in Malaysia, 43.1% in Indonesia, 51.8% in Taiwan, 54.8% in Thailand, and 66.2% in China.
Therefore, JETRO and VIETRADE as the role of Governmental trade promotion agencies have co-operated to continuously organize “the 6th Vietnam-Japan Exhibition on Supporting Industries in Hanoi – it is so called SIE 2015”. The exhibition is offering a place for 57 Japanese exhibitors (as BUYERs) to show parts and components they expect to purchase in Vietnam and 44 Vietnamese exhibitors (as SELLERs) to exhibit their produced accessories and production capabilities to Japanese companies.
The SIE 2015 is held under the framework of Vietnam-Japan Economic Partnership Agreement (VJEPA), which was signed by the two Governments in December 2008 and took effect from 1st October 2009. It was also one of the themes of the Vietnam – Japan Joint Initiative of phase 3.
This year, SIE 2015 is also co-located with other 2 industrial specialized exhibitions, they are: “Vietnam Manufacturing Expo – VME” by Reed Tradex Thailand, and “Industrial Components and Sub-contracting Vietnam – ICS” by Hanoi Trade Promotion Center.
We are sure that the combination of these shows will make great effect for both exhibitors and visitors and being expected to create good business opportunities for all the concerned parties.
Also we expect all exhibitors and visitors take full advantage of this event for networking.
September 2015
INFORMATION
VIETNAM - JAPAN EXHIBITION ON SUPPORTING INDUSTRIES
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
CULTURAL PALACE FLOOR PLAN
EXITTran Quoc Toan Str.
EXIT
Tran Quoc Toan Str.
Tran
Bin
h Tr
ong
Str.
Tran
Bin
h Tr
ong
Str.
EXIT
ENTRANCE
ENTRANCE
OPENING CEREMONY HALL
EXIT
Security
SERV
ICE
ARE
A
EXHIBITION HALL
Tran Hung Dao Str.
Yet K
ieu
Str.
Yet K
ieu
Str.
Yet K
ieu
Str.
PARKINGAREA
VIP
PA
RKIN
G
EXITEXIT
EXIT
A1
Tran Hung Dao Str.ENTRY
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
AIR CONDITIONER6M x 3.2M
AIR CONDITIONER6M x 3.2M
EXIT EXIT
HEK12
J13
JP01 K08
J14
J10
EXIT
J08
JP02
F01
F06
F09
G03
G13F13
F10
G25
L14
J09
J11
JP04JP05 JP03
JICA
AIR CONDITIONER6M x 3.2M
AIR CONDITIONER6M x 3.2M
EXIT EXIT
EMERGENCYEXIT
GFE
JK
EXIT ENTRANCE
DCB
A
I01 I02
I03 I04
I05 I06
H07 H08
I09 I10
I11 I12
I13 I14
THE PRIDE OFVIETNAM BY HPA
VN35
G26
G23 G24
H01 H02
H03 H04
H05 H06
H07 H08
H09 H10
VN34
J07
H16H15
ReedTradex
CESCO ROGERSTAFF ROOM
G19
G22
G17
THE STAR PAVILION
F25
F21 F22
F19
F17
VN33 VN29VN30VN31VN32 L06
E23
E24
E21
E22
E19 E18
I
L
VN01
K10
JP07
JP08
E01
E13
E10
L07 L11 L12 L13
TAIWAN PAVILION
SAEILO
K09 K11
HITACHIASIA
SCVIETNAM
AARDWOLF
FSIVIETNAM
TOSTEM
F14
HEXAGON
J12
TAKAMATSU
BIBUS
YAHATA VN
DE DUONGL09
K07KIMBERLYCLARK
JAPAN PAVILIONBy ACT
SANDVIK
G02
SMCVIETNAM
VINATAIYO
HISAKAWORKS
K13BMM INFORMATION
BOOTH
THAILAND PAVILIONBY BUILD
G04
G05 G06
G07 G08
ACME
PANASONIC
ROBOT
SP VISION
TKS AIB
THAISIN MOTOR
SMARTPLAS
KINGSBRITE
PROLOG
PHOTONIC
C.C.AUTOPART
NAM SON
T.N.S.L
THANASAN
ORIENTAL
LASERTECH
SODICK
BUSINESSMATCHMAKING
CAD/CAMVIETNAM
NIKON
IGUS
J16
KYOSEI
ANVIETLONG
MISUMI
INTEROLL
E16
MECOLPRESS
GNUTTI
CREATZ3D
D27 D28
E02
HASON
SOCO
YANASE GLEASONASIA
NAGANO
JETROINFORMATION
JP06
TINHHA
FUCHUNSHIN
DYNACAST
MASTERTECH
KOBELCO
AIR CONDITIONER6M x 3.2M
EXITAIR CONDITIONER
6M x 3.2M
EXITCSC
ReedTradex
CESCO ROGERSTAFF ROOMAIR CONDITIONER
6M x 3.2MAIR CONDITIONER
6M x 3.2M
INDIA PAVILION
L17 L18 L19 L20 L21
H19
H22
H24
H26
H28
H29 H30
I16
I17 I18
I19 I20
I21 I22
I23 I24
I25 I26
I27 I28
I29 I30J22
J23
L22
J16
L23
MITSUBISHI
EMERGENCYEXIT
ENTRANCE
SD SE
SA
SD03 SD04 SD05
SD06
GA ROOMSERVERROOM
lockable 2 Pcs
VIP
lockable1 Pcs
Pre
Prin
ter
CO
M
VIP
Gro
up
Prin
ter
Prin
ter
Prin
ter
STAGE
Wal
k In
Prin
ter
WALK IN
REGISTRATION
OPENNING CEREMONY HALL
SD02
E07
E14
MICO
F07
KAMOGAWA
FULONG
HTMM
ALLIANZMEDIA
ORANGEMEDIA
GREENWORLD VSA
HUNZA
H27
H25
OKAMOTO
TIRAWATAIR
SEEKINTER
ASKAR ABBOT VALGRO
GRIPWELLDANTAL
APEXE17
E27
NEWCENTURY
H14H13
H12H11
WELDTEC
EASTERN
CONFERENCEPROGRAM
3x2.5VIPLOUNGE
SD01
J17
J18
J19
TGI
YASKAWA
KOREA
E04
E06NAGANO
NAGANO
NAGANO
NAGANOE05
E03
F05
F03NAGANO
NAGANO
NAGANO
NATIONALINSTRUMENT
E28
Wal
k In
Prin
ter
Wal
k In
Wal
k In
NAGANO
THE STARPAVILION
CANON BANDO AZUMANEJI ARAI AKITA
OILL SEALADVANEX
DENSO+HAMADEN
CHIENOWA
CURIOUS
ENSHUSANKO
FUJIKIN
FUKUOKARASHI
FUJIXEROX
HONDALOCK
HIMEJI
ICS
ITSUWA
IWASEYA
JAPANMIMTECH
RICOH PANASONIC
SAKURAI OGINO
SHIOGAI OHASHI
PALOMA
PREC
PRINTECOHTOMI
RHYTHMPRECISIONTAMRON
TAICO
SISIKU
SHIRAKAWA
TOYOTA TOHO
Y.H.SEIKO TECHNOTAIYO
YANAGAWA TOYODAGIKEN
YASHIMA TSUKUBA
YODOKAWA V-HONEST
MANHQUANG
HTHTRUONGPHAT
MINHDUNG
HUNGDUNG
MINHQUANG
ICHIVIETNAM
PRECISIONMACHANICS IDMEA
PRODETECH INNOTEK
SEIKIINNOVATION
JATAUTOPARTS
SEIKICOPRECISION
LEGROUP
JFEVIETNAMMIE
MINATORUBBER
JTEC
NAGOYAKATAN KANETSU
NOBLE KOM
NODA KTC
O.N.TECHNO KYOEI
DONG HAIPLASTIC
3HPLASTIC
ECOVIETNAM
ANMITOOLS
ECOTEK AUTOMOBILE
HAI VANPRECISION
BINHMINH
HANOIMECHANICAL
CLOUD &DRAGON
HP-TECHVIETNAM
COSMOS
JETROSECRETARIAT
ROOM
YAMAGUCHIVIETNAM
VISIONINTERNATIONAL
VIETTUCINDUSTRIAL
VIETNAMPRECISION
INTECHVIETNAM
VIETNAMHTMP
VIETRAINBOW
VIETINDUSTRY
VIET AN
TRI CUONG
THINHHUNG
SHENGLISUNPLATAMPHAT
TANPHAT
TECHNOKOM
R/S
JP09
JP10
JP11
JP12
JP13
JP14
JP15
JP16
JP17
JP18
JP19
JP20IHI
JP21
JP22
JP23
JP24
JP25
JP26
JP27
JP28
JP29
JP30
JP31
JP32
JP33
JP34
JP35
JP36
JP37
JP38
JP39
JP40
JP41
JP42
JP43
JP44
JP45
JP46
JP47
JP48
JP49
JP50
JP51
JP52
JP53
JP54
JP55
JP56
JAPANESE COMPANY
VIETNAMESE COMPANY
VN02
VN03
VN04
VN05
VN06
VN07
BACVIET
VN08
VN09
VN10
VN11
VN12
VN13
VN14
GIAI PHONGRUBBER
VN15
VN16
VN17
VN18
VN19
VN20
VN21
VN22
VN23
VN24
VN25
VN26
VN27
VN28
VN36
VN37
VN38
VN39
VN40
VN41
VN42
VN43
VN44
WELDING COMPETITION
BOOTH LAyOUTVIETNAM - JAPAN EXHIBITION ON SUPPORTING INDUSTRIES
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
INFORMATION
BOOTH LAyOUTVIETNAM - JAPAN EXHIBITION ON SUPPORTING INDUSTRIES
EXIT
TECHNOKOM VN33
TAM PHAT VN31
SUNPLA VN30
THINH HUNG VN34
SEIKICO PRECISION
VN28
LEGROUP VN21
HP-TECH VIETNAM
VN14
COSMOS VN07
TRI CUONG VN35
SEIKI INNOVNATIONS
VN27
JAT AUTOPARTS
VN20
HANOI MECHANICAL
VN13
CLOUD & DRAGON
VN06O.N TECHNO
JP32KYOEI
JP26
VIET AN VN36
PRODETECH VN26
INNOTEK VN19
HAI VAN PRECISION
VN12
BINH MINH VN05
NODAJP31
KTCJP25
VIET INDUSTRY VN37
PRECISION MECHANICS
VN25IDMEA
VN18
GIAI PHONG RUBBER VN11
BAC VIET VN04
NOBLEJP30
KOMJP24
VIET RAINBOW VN38
MINH QUANG
VN24
ICHI VIETNAM VN17
ECOTEK VN10
AUTOMOBILE VN03
NAGOYA KATAN KANETSU
JP23VIETNAM
HTMP VN39
MINH DUNG VN23
HUNG DUNG VN16
ECO VIETNAM VN09
ANMI TOOLS VN02
MINATO RUBBER JTEC
JP22INTECH
VIETNAM VN40
MANH QUANG
VN22
HTH TRUONG PHAT VN15
DONG HAI PLASTIC
VN08
3H PLASTIC VN01
VIETNAM MIEJP27
JFEJP21
VIETNAMESE COMPANIES
JAPANESE COMPANIESVIETUC
INDUSTRIAL VN42
TAMRONJ46
RHYTHM PRECISION
J39IHI
JP20FUJI XEROX
JP13
VISION INTERNATIONAL
VN43 TAICOJ45
PRINTECOHTOMI
J38
JAPAN MIMTECH
J19
FUKUOKARASHI
JP12
YAMAGUCHI VIETNAM
VN44YODOGAWA
JP56V-HONEST
JP51SISIKU
JP44PRECJP37
IWASEYAJP18
FUJIKINJP11
JICA YASHIMAJP55
TSUKUBAJP50
SHIRAKAWAJP43
PALOMAJP36
ITSUWAJP17
ENSHUSANKO
YANAGAWAJP54
TOYODA GIKENJP49
SHIOGAIJP42
OHASHIJP35
ICSJP16
CURIOUSJP09
Y.H SEIKOJP53
TECHNO TAIYOJP48
SAKURAIJP41
OGINOJP34
HIMEJIJP15
CHIENOWAJP08
JETROSECRETARIAT
ROOMTOYOTA
JP52TOHO
JP47RICOH
JP40PANASONIC
JP33HONDA LOCK
JP14
DENSO+ HAMADEN
CANONJP06
BANDOJP05
ARAIJP03
AKITAOIL SEAL
JP02
EXIT
TAN PHAT VN32
SHENGLI
VN29
VIETNAM PRECISION
VN41
BUSINESSMATCH
MAKING
JETRO INFORMATION
AZUMANEJIJP04
ADVANEXJP01
JP10
JP29
JP28
JP07
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
INFORMATION
Organization Page
Booth No Company Name Page
VN 01 3H PLASTIC JSC 68
VN 02 ANMI TOOLS CO.,LTD 69
VN 03 AUTOMOBILE AND MOTORCYCLE PARTS MANUFACTURING HUNG YEN CO.,LTD 70
VN 04 BAC VIET TECHNOLOGY JSC 71
VN 05 BINH MINH TMC CO.,LTD 72
VN 06 CLOUD AND DRAGON CO.,LTD 73
VN 07 COSMOS INDUSTRIAL CO.,LTD 74
VN 08 DONG HAI PLASTIC ONE MEMBER CO.,LTD 75
VN 09 ECO VIETNAM CO.,LTD 76
VN 10 ECOTEK CO.,LTD 77
VN 11 GIAI PHONG RUBBER CO.,LTD 78
VN 12 HAI VAN PRECISION EQUIPMENT CO.,LTD 79
VN 13 HANOI MECHANICAL CO.,LTD 80
VN 14 HP-TECH VIETNAM ENGINEERING AND MOLDS JSC 81
VN 15 HTH TRUONG PHAT JSC 82
VN 16 HUNG DUNG CO.,LTD 83
VN 17 ICHI VIETNAM SUPPORTING INDUSTRY JSC 84
VN 18 INDUSTRIAL MECHANICS AND AUTOMATION CO.,LTD 85
VN 19 INNOTEK JOINT STOCK COMPANY 86
VN 20 JAT AUTOPARTS AND INDUSTRY EQUIPMENTS PRODUCTION JSC 87
VN 21 LEGROUP MANUFACTURING & TRADING JSC 88
VN 22 MANH QUANG CO.,LTD 89
VN 23 MINH DUNG CO.,LTD 90
VN 24 MINH QUANG TRADING AND INDUSTRIES CO.,LTD 91
VN 25 PRECISION MECHANICS AND TECHNOLOGY TRANSFER JSC 92
VN 26 PRODETECH JSC 93
VN 27 SEIKI INNOVATIONS VIETNAM CO.,LTD 94
VN 28 SEIKICO PRECISION MECHANICAL CO.,LTD 95
VN 29 SHENGLI VIETNAM INTERNATIONAL TRADING PRODUCTION CO.,LTD 96
VN 30 SUNPLA JSC 97
VN 31 TAM PHAT ELECTRICAL ENGINEERING AND AUTOMATION JSC 98
VN 32 TAN PHAT AUTOMATION JSC 99
VN 33 TECHNOKOM JSC 100
VN 34 THINH HUNG CASTING JSC 101
VN 35 TRI CUONG INDUSTRIAL CO.,LTD 102
VN 36 VIET AN JOINT STOCK COMPANY 103
VN 37 VIET INDUSTRY GROUP JSC 104
VN 38 VIET RAINBOW CO.,LTD 105
VN 39 VIETNAM HTMP MECHANICAL CO.,LTD 106
VN 40 INTECH VIETNAM JSC 107
VN 41 VIETNAM PRECISION MECHANICAL, SERVICE AND TRADING CO.,LTD 108
VN 42 VIETUC INDUSTRIAL AND COMMERCIAL JSC 109
VN 43 VISION INTERNATIONAL VIETNAM CO.,LTD 110
VN 44 YAMAGUCHI VIETNAM JSC 111
Booth No Company Name Page
JP 01 ADVANEX(VIETNAM)LTD 11
JP 02 AKITA OIL SEAL VIETNAM CO., LTD 12
JP 03 ARAI VIETNAM CO.,LTD 13
JP 04 AZUMANEJI CO., LTD 14
JP 05 BANDO MANUFACTURING (VIETNAM) CO., LTD 15
JP 06 CANON VIETNAM CO., LTD 16
JP 08 CHIENOWA CO., LTD 17
JP 09 CURIOUS SEIKI VIET NAM CO., LTD 18
JP 07 DENSO MANUFCTURING VIETNAM CO., LTD 19
JP 10 ENSHU SANKO VIETNAM CO., LTD 20
JP 13 FUJI XEROX HAI PHONG CO., LTD 21
JP 11 FUJIKIN VIET NAM CO., LTD 22
JP 12 FUKUOKARASHI VIETNAM CO., LTD 23
JP 07 HAMADEN VIETNAM CO., LTD 24
JP 15 HIMEJI ELECTRIC PLATING VIETNAM CO., LTD 25
JP 14 HONDA LOCK VIETNAM CO., LTD 26
JP 16 ICS VIETNAM CO., LTD 27
JP 20 IHI CORPORATION 28
JP 17 ITSUWA VIETNAM CO., LTD 29
JP 18 IWASEYA VIET NAM CO., LTD 30
JP 19 JAPAN MIMTECH TOKO. CO., LTD 31
JP 21 JFE SHOJI GROUP 32
JP 22 JTEC HANOI CO., LTD 33
JP 23 KANETSU VIETNAM CO., LTD 34
JP 24 KOM VIETNAM CO., LTD 35
JP 25 KTC HANOI CO., LTD 36
JP 26 KYOEI DIETECH VIET NAM CO., LTD 37
JP 27 VIETNAM MIE CO., LTD 38
JP 28 MINATO RUBBER VIETNAM CO., LTD 39
JP 29 NAGOYA KATAN CO., LTD 40
JP 30 NOBLE ELECTRONICS VIETNAM CO., LTD 41
JP 31 NODA VIETNAM CO., LTD 42
JP 32 O.N TECHNO VIETNAM CO., LTD 43
JP 34 OGINO SEISAKUSYO CO., LTD 43
JP 35 OHASHI TEKKO VIETNAM, INC. 45
JP 36 PALOMA VIET NAM CO.,LTD 46
JP 33 PANASONIC VIETNAM CO., LTD 47
JP 37 PREC VN CO., LTD 48
JP 38 PRINTEC OHTOMI CO., LTD 49
JP 39 RHYTHM PRECISION VIETNAM CO., LTD 50
JP 40 RICOH IMAGING PRODUCTS (VIETNAM) CO., LTD 51
JP 41 SAKURAI VIETNAM CO., LTD 52
JP 42 SHIOGAI SEIKI VIETNAM CO., LTD 53
JP 43 SHIRAKAWA SEISAKUSHO, LTD 54
JP 44 SISIKU ADDKREIS CORPORATION 55
JP 45 TAICO VIETNAM CO., LTD 56
JP 46 TAMRON OPTICAL(VIETNAM) CO., LTD 57
JP 48 TECHNOTAIYO VIETNAM CO., LTD 58
JP 47 TOHO VIETNAM CO., LTD 59
JP 49 TOYODA GIKEN CO., LTD 60
JP 52 TOYOTA MOTOR VIETNAM CO., LTD 61
JP 50 TSUKUBA DIECASTING VIETNAM CO., LTD 62
JP 51 V-HONEST CO., LTD 63
JP 53 Y.H SEIKO VIETNAM, JSC 64
JAPANESE COMPANyEXHIBITORS LIST
ORGANIZATION
Booth No Company Name Page
JP 54 YANAGAWA SEIKO VIETNAM CO., LTD 65
JP 55 YASHIMA & CO.,LTD 66
JP 56 YODOGAWA RASENKAN MFG. CO.,LTD 67
JAPAN INTERNATIONAL COOPERATION AGENCY (JICA) 112
VIETNAM TRADE PROMOTION AGENCY (VIETRADE) 113
JAPAN EXTERNAL TRADE ORGANIZATION (JETRO) 114
VIETNAMESE COMPANy
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
Boot
h N
o.Co
mpa
ny N
ame
Page
Sect
or o
f ite
ms
Plas
tic/
Rubb
er
part
s
Mol
d m
an-
ufac
turin
g (Pr
ess s
hot,
plas
tic et
c.)
Forg
-in
g, D
ie
cast
ing
Ma-
chin
ing
part
s
Platin
g, Co
ating
, Hea
t-tre
atmen
t
Elec
tron
/El
ectr
ic
part
s
Ass
em-
bly
Mac
hine
/Eq
uipm
ent
(Proc
essin
g, De
liv-
ery,
Maint
enan
ce)
Jig,
To
ols
Mat
eria
lPa
ck-
agin
gO
ther
s
JP 0
1Ad
vane
x (V
ietn
am) L
td11
JP 0
2A
kita
Oil
Seal
Vie
tnam
Co.
,Ltd
12
JP 0
3A
rai V
ietn
am C
o.,L
td13
JP 0
4A
zum
anej
i Co.
,Ltd
14
JP 0
5Ba
ndo
Man
ufac
turin
g Co
.,Ltd
15
JP 0
6Ca
non
Viet
nam
Co.
,Ltd
16
JP 0
8Ch
ieno
wa
Co.,L
td17
JP 0
9Cu
rious
Sei
ki V
ietn
am C
o.,L
td18
JP 0
7D
enso
Man
ufct
urin
g Vi
etna
m C
o.,L
td19
JP 1
0En
shu
Sank
o Vi
etna
m C
o., L
td20
JP 1
3Fu
ji xe
rox
Hai
Pho
ng C
o.,L
td21
JP 1
1Fu
jikin
Vie
tnam
Co.
,Ltd
22
JP 1
2Fu
kuok
aras
hi V
ietn
am C
o., L
td23
JP 0
7H
amad
en V
ietn
am C
o.,L
td24
JP 1
5H
imej
i Ele
ctric
Pla
ting
Viet
nam
Co.
,Ltd
25
JP 1
4H
onda
lock
Vie
tnam
Co.
,Ltd
26
JP 1
6IC
S Vi
etna
m C
o., L
td27
JP 2
0IH
I Cor
pora
tion
28
JP 1
7Its
uwa
Viet
nam
Co.
,Ltd
29
JP 1
8Iw
asey
a Vi
etna
m C
o.,L
td30
JP 1
9Ja
pan
Mim
tech
Toko
. Co.
,Ltd
31
JP 2
1JF
E Sh
oji G
roup
32
JP 2
2JT
EC H
anoi
Co.
,Ltd
33
JP 2
3Ka
nets
u Vi
etna
m C
o.,L
td34
JP 2
4Ko
m V
ietn
am C
o.,L
td35
JP 2
5KT
C H
anoi
Co.
,Ltd
36
JP 2
6Ky
oei D
iete
ch V
ietn
am C
o.,L
td37
JP 2
7Vi
etna
m M
ie C
o.,L
td38
JP 2
8M
inat
o Ru
bber
Vie
tnam
Co.
,Ltd
39
JAPA
NES
E CO
MPA
Ny
INFORMATION
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
INFORMATION
Boot
h N
o.Co
mpa
ny N
ame
Page
Sect
or o
f ite
ms
Plas
tic/
Rubb
er
part
s
Mol
d m
an-
ufac
turin
g (Pr
ess s
hot,
plas
tic et
c.)
Forg
-in
g, D
ie
cast
ing
Ma-
chin
ing
part
s
Platin
g, Co
ating
, Hea
t-tre
atmen
t
Elec
tron
/El
ectr
ic
part
s
Ass
em-
bly
Mac
hine
/Eq
uipm
ent
(Proc
essin
g, De
liv-
ery,
Maint
enan
ce)
Jig,
To
ols
Mat
eria
lPa
ck-
agin
gO
ther
s
JP 2
9N
agoy
a Ka
tan
Co.,L
td40
JP 3
0N
oble
Ele
ctro
nics
Vie
tnam
Co.
,Ltd
41
JP 3
1N
oda
Viet
nam
Co.
,Ltd
42
JP 3
3Pa
naso
nic
Viet
nam
Co.
, Ltd
43
JP 3
4O
gino
Sei
saku
syo
Co.,L
td44
JP 3
5O
hash
i Tek
ko V
ietn
am ,
INC.
45
JP 3
2O
.N te
chno
Vie
tnam
Co.
, Ltd
46
JP 3
6Pa
lom
a Vi
etna
m C
o.,L
td47
JP 3
7Pr
ec C
o.,L
td48
JP 3
8Pr
inte
c O
htom
i Co.
, Ltd
49
JP 3
9Rh
ythm
Pre
cisi
on V
ietn
am C
o.,L
td50
JP 4
0Ri
coh
Imag
ing
Prod
ucts
(Vie
tnam
) Co.
, Ltd
51
JP 4
1Sa
kura
i Vie
tnam
Co.
,Ltd
52
JP 4
2Sh
ioga
i Sei
ki V
ietn
am C
o.,L
td53
JP 4
3Sh
iraka
wa
Seis
akus
ho, L
td54
JP 4
4Si
siku
Add
krei
s Co
rpor
atio
n55
JP 4
5Ta
ico
Viet
nam
Co.
,Ltd
56
JP 4
7To
ho V
ietn
am C
o.,L
td57
JP 4
6Ta
mro
n O
ptic
al (V
ietn
am) C
o.,L
td58
JP 4
8Te
chno
taiy
o Vi
etna
m C
o.,L
td59
JP 5
1V-
Hon
est C
o.,L
td60
JP 4
9To
yoda
Gik
en C
o.,L
td61
JP 5
0Ts
ukub
a D
ieca
stin
g Vi
etna
m C
o., L
td62
JP 5
2To
yota
Mot
or V
ietn
am C
o., L
td63
JP 5
3Y.
H S
eiko
Vie
tnam
, JSC
64
JP 5
4Ya
naga
wa
Seik
o Vi
etna
m C
o.,L
td65
JP 5
5Ya
shim
a &
Co.
, Ltd
66
JP 5
6Yo
doga
wa
Rase
nkan
MFG
Co.
,Ltd
67
JAPA
NES
E CO
MPA
Ny
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
No.
Com
pany
Nam
ePa
ge
Sect
or o
f ite
ms
to s
ell
Plas
tic/
Rubb
er
part
s
Mol
d m
anu-
fact
urin
g ( P
ress
sho
t, pl
astic
etc
.)
Forg
-in
g, D
ie
cast
ing
Ma-
chin
ing
part
s
Plat
ing,
Co
atin
g,
Hea
t-tr
eatm
ent
Elec
-tr
on/
Elec
tric
pa
rts
Ass
em-
bly
Mac
hine
/Eq
uipm
ent
( Pro
cess
ing,
D
eliv
ery,
M
aint
enan
ce)
Jig,
To
ols
Mat
e-ria
lPa
ck-
agin
gO
ther
s
VN 0
13H
Pla
stic
JSC
68
VN 0
2A
NM
I Too
ls C
o.,L
td
69
VN 0
3Au
tom
obile
and
Mot
orcy
cle
Part
s M
anuf
actu
ring
Hun
g Ye
n Co
.,Ltd
70
VN 0
4Ba
c Vi
et Te
chno
logy
JSC
71
VN 0
5Bi
nh M
inh
TMC
Co.,L
td
72
VN 0
6Cl
oud
and
Dra
gon
Co.,L
td
73
VN 0
7CO
SMO
S In
dust
rial C
o.,L
td74
VN 0
8D
ong
Hai
Pla
stic
One
Mem
ber C
o.,L
td75
VN 0
9EC
O V
ietn
am C
o.,L
td
76
VN 1
0EC
OTE
K Co
.,Ltd
77
VN 1
1G
iai P
hong
Rub
ber C
o., L
td78
VN 1
2H
ai V
an P
reci
sion
Equ
ipm
ent C
o., L
td79
VN 1
3H
anoi
Mec
hani
cal C
o.,L
td80
VN 1
4H
P-Te
ch V
ietn
am E
ngin
eerin
g an
d M
old
JSC
81
VN 1
5H
TH T
ruon
g Ph
at JS
C 82
VN 1
6H
ung
Dun
g Co
.,Ltd
83
VN 1
7Ic
hi V
ietn
am S
uppo
rtin
g In
dust
ry JS
C
84
VN 1
8In
dust
rial M
echa
nics
& A
utom
atio
n Co
.,Ltd
85
VN 1
9In
note
k jo
int s
tock
com
pany
86
VN 2
0JA
T Au
topa
rts
and
Indu
stria
l Eq
uipm
ents
pro
duct
ion
JSC
87
VN 2
1Le
Gro
up M
anuf
actu
ring
and
Trad
ing
JSC
88
VN 2
2M
anh
Qua
ng C
o.,L
td89
VN 2
3M
inh
Dun
g Co
.,Ltd
90
VIE
TNA
MES
E CO
MPA
Ny
INFORMATION
Boot
h N
o.Co
mpa
ny N
ame
Page
Sect
or o
f ite
ms
Plas
tic/
Rubb
er
part
s
Mol
d m
an-
ufac
turin
g (Pr
ess s
hot,
plas
tic et
c.)
Forg
-in
g, D
ie
cast
ing
Ma-
chin
ing
part
s
Platin
g, Co
ating
, Hea
t-tre
atmen
t
Elec
tron
/El
ectr
ic
part
s
Ass
em-
bly
Mac
hine
/Eq
uipm
ent
(Proc
essin
g, De
liv-
ery,
Maint
enan
ce)
Jig,
To
ols
Mat
eria
lPa
ck-
agin
gO
ther
s
JP 2
9N
agoy
a Ka
tan
Co.,L
td40
JP 3
0N
oble
Ele
ctro
nics
Vie
tnam
Co.
,Ltd
41
JP 3
1N
oda
Viet
nam
Co.
,Ltd
42
JP 3
3Pa
naso
nic
Viet
nam
Co.
, Ltd
43
JP 3
4O
gino
Sei
saku
syo
Co.,L
td44
JP 3
5O
hash
i Tek
ko V
ietn
am ,
INC.
45
JP 3
2O
.N te
chno
Vie
tnam
Co.
, Ltd
46
JP 3
6Pa
lom
a Vi
etna
m C
o.,L
td47
JP 3
7Pr
ec C
o.,L
td48
JP 3
8Pr
inte
c O
htom
i Co.
, Ltd
49
JP 3
9Rh
ythm
Pre
cisi
on V
ietn
am C
o.,L
td50
JP 4
0Ri
coh
Imag
ing
Prod
ucts
(Vie
tnam
) Co.
, Ltd
51
JP 4
1Sa
kura
i Vie
tnam
Co.
,Ltd
52
JP 4
2Sh
ioga
i Sei
ki V
ietn
am C
o.,L
td53
JP 4
3Sh
iraka
wa
Seis
akus
ho, L
td54
JP 4
4Si
siku
Add
krei
s Co
rpor
atio
n55
JP 4
5Ta
ico
Viet
nam
Co.
,Ltd
56
JP 4
7To
ho V
ietn
am C
o.,L
td57
JP 4
6Ta
mro
n O
ptic
al (V
ietn
am) C
o.,L
td58
JP 4
8Te
chno
taiy
o Vi
etna
m C
o.,L
td59
JP 5
1V-
Hon
est C
o.,L
td60
JP 4
9To
yoda
Gik
en C
o.,L
td61
JP 5
0Ts
ukub
a D
ieca
stin
g Vi
etna
m C
o., L
td62
JP 5
2To
yota
Mot
or V
ietn
am C
o., L
td63
JP 5
3Y.
H S
eiko
Vie
tnam
, JSC
64
JP 5
4Ya
naga
wa
Seik
o Vi
etna
m C
o.,L
td65
JP 5
5Ya
shim
a &
Co.
, Ltd
66
JP 5
6Yo
doga
wa
Rase
nkan
MFG
Co.
,Ltd
67
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
INFORMATION
No.
Com
pany
Nam
ePa
ge
Sect
or o
f ite
ms
to s
ell
Plas
tic/
Rubb
er
part
s
Mol
d m
anu-
fact
urin
g ( P
ress
sho
t, pl
astic
etc
.)
Forg
-in
g, D
ie
cast
ing
Ma-
chin
ing
part
s
Plat
ing,
Co
atin
g,
Hea
t-tr
eatm
ent
Elec
-tr
on/
Elec
tric
pa
rts
Ass
em-
bly
Mac
hine
/Eq
uipm
ent
(Pro
cess
ing,
D
eliv
ery,
M
aint
enan
ce)
Jig,
To
ols
Mat
e-ria
lPa
ck-
agin
gO
ther
s
VN 2
4M
inh
Qua
ng T
radi
ng &
Indu
strie
s Co.
,Ltd
91
VN 2
5Pr
ecis
ion
Mec
hani
cs a
nd Te
chno
logy
Tr
ansf
er JS
C92
VN 2
6Pr
odet
ech
JSC
93
VN 2
7Se
iki I
nnov
atio
ns V
ietn
am C
o.,L
td94
VN 2
8Se
ikic
o Pr
ecsi
on M
echn
ical
Co.
,Ltd
95
VN 2
9Sh
engl
i Vie
t Nam
Inte
rnat
iona
l Tr
adin
g Pr
oduc
tion
Co.,L
td96
VN 3
0Su
npla
JSC
97
VN 3
1Ta
m P
hat E
lect
rical
Eng
inee
ring
and
Auto
mat
ion
JSC
98
VN 3
2Ta
n Ph
at A
utom
atio
n JS
C.99
VN 3
3Te
chno
kom
JSC
10
0
VN 3
4Th
inh
hung
Cas
ting
Co.,L
td
101
VN 3
5Tr
i Cuo
ng In
dust
rial C
o.,L
td10
2
VN 3
6Vi
et A
n JS
C10
3
VN 3
7Vi
et In
dust
ry G
roup
JSC
104
VN 3
8Vi
et R
ainb
ow C
o.,L
td10
5
VN 3
9Vi
etna
m H
TMP
Mec
hani
cal C
o.,L
td10
6
VN 4
0In
tech
Vie
tnam
JSC
107
VN 4
1Vi
etna
m P
reci
sion
Mec
hani
cal,
Serv
ice
and
Trad
ing
Co.,L
td
108
VN 4
2Vi
etuc
Indu
stria
l & C
omm
erci
al J
SC
10
9
VN 4
3Vi
sion
Inte
rnat
iona
l Vie
tnam
Co.
,Ltd
11
0
VN 4
4Ya
mag
uchi
Vie
tnam
JSC
111
VIE
TNA
MES
E CO
MPA
Ny
11VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
ADVANEX (VIETNAM) LTD
Establishment year : 2006Number of Employees : 92Factory Address : Lot F3, Phuc Dien IZ, Cam Giang district, Hai Duong province, VietnamFactory space (m2) : 1,700Charter Capital (USD) : 850,000 Turnover in 2014 (USD) : 5,000,000Main Technology : Precision productsMain Customers : Canon; Denso; MedikitQuality Certificates : ISO 9001-2008; ISO 14001-2004Other information : N/A
Person in charge : Mr. SOICHI TSURUSAWAPosition : Sales ManagerAddress (Office) : Lot F3, Phuc Dien IZ, Cam Giang District, Hai Duong province, vietnamHochiminh office : Room 503; Building A, Incubation Center, Tan Thuan EPZ, Ho Chi Minh city, VietnamTel : + 84 - 320 - 3545 075Fax : + 84 - 320 - 3545 076Email : [email protected] : http:// www.advanex.co.jp
Purchasing Items/Selling ItemsProduct name: Precision spring engineersUse for: OA; Automotive; ElectronicsMinimum lot: 10,000 pcsMaterial: SUS304; 631; SWC; SWP B…
Product name: Ni- PlatingUse for: Automotive; OA; ElectronicsMinimum lot: 100,000 pcsMaterial: SWC; SWP B
Product name: Zn- PlatingUse for: Automotive; OA; ElectronicsMinimum lot: 100,000 pcsMaterial: SWC; SWP- B
Product name: EDP processUse for: AutomotiveMinimum lot: 30,000 pcsMaterial: SWC
Company Profile
Contact Information
JP 01
12 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
AKITA OIL SEAL VIETNAM CO., LTD
Establishment year : 2005Number of Employees : 60Factory Address : Lot A-4, Nomura Haiphong Industrial An Duong District, Haiphong city, VietnamFactory space (m2) : 10,204Charter Capital (USD) : 898,000Turnover in 2012 (USD) : 820,000 Main Technology : Mini O-ring, Rubber gaskets, PackingMain Customers : Motorcycle parts maker, Water pipe makerQuality Certificates : ISO9001:2008Other information : Akita Oil Seal Co., Ltd sells high quality precise rubber part.
Person in charge : Mr. WATANABE GOKIPosition : DirectorAddress (Office) : Lot A-4, Nomura Haiphong Industrial An Duong District, Haiphong city, VietnamTel : +84 - 31-3743-310Fax : +84 - 31-3743-312Email : [email protected] : http://www.akita-aos.com/index.html
Selling ItemsProduct name: O-RINGsUse for: MachineryMinimum lot: 10,000 pcsMaterial: FKM, NBR, VMQ, EPDM, H-NBR etc
Product name: SealsUse for: MachineryMinimum lot: 10,000 pcsMaterial: FKM, NBR, VMQ, EPDM, H-NBR etc
Product name: Rubber moldUse for: Vulcanizing rubberMinimum lot: 1 pcMaterial: SUS, NAC
Product name: Rubber GasketsUse for: MachineryMinimum lot: 10,000 pcsMaterial: FKM, NBR, VMQ, EPDM, H-NBR etc
Product name: PackingUse for: MachineryMinimum lot: 10,000 pcsMaterial: FKM, NBR, VMQ, EPDM, H-NBR etc
Product name: RubberUse for: ProductionMinimum lot: 100-1000kgMaterial: FKM, NBR, VMQ, EPDM, H-NBR etc
Company Profile
Contact Information
We look for the suppliers in field of Rubber Material and in field of the mold for rubber.AKITA OIL SEAL VIENTAM CO., LTD manufacture and sell high quality and reasonable price O-ring, X-ring, Gaskets, Packing.
Purchasing Items
JP 02
13VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
ARAI VIETNAM CO.,LTD
Establishment year : 09/23/2011Number of Employees : 65Factory Address : Plot 7- Dong Van IZ, Duy Tien District, Ha Nam province, Viet NamFactory space (m2) : 20,000Charter Capital (USD) : 4,500,000 Turnover in 2012 (USD) : 1,350,563 Main Technology : Injection Molding of Plastic PartsMain Customers : Field of Home AppliancesQuality Certificates : N/AOther information : We still have Production Capacity
Person in charge : Mr. KUNIO SAITO/ Mr. THUANPosition : General Director/ Assistant ManagerAddress (Office) : Plot 7- Dong Van IZ, Duy Tien District, Ha Nam province , Viet NamTel : +84 - 351 - 358 2222 / +84 - 945 - 381 912 (Mr. Saito) + 84 - 989 - 627 285 (Mr. Thuan)Fax : +84 - 351 - 358 2223Email : [email protected]/ [email protected] : http:// www.fact-link.com.vn/home/arai-vn/
Selling ItemsProduct name: Tray shelfUse for: Home Appliances partsMinimum lot: By Customer requesstMaterial: Plastic, Plastic with glass
Product name: Internal Parts for Home AppliancesUse for: Home AppliancesMinimum lot: By Customer requesstMaterial: Plastic
Product name: Injection MoldUse for: Home Appiances Minimum lot: 1 pcMaterial: Steel
Product name: Appearance and assembledUse for: Home Appliances partsMinimum lot: By Customer requesstMaterial: Plastic, Plastic with glass
Product name: Balancer CaseUse for: Home AppliancesMinimum lot: By Customer requesstMaterial: Plastic
Product name: Packing MaterialUse for: Plastic parts for Home AppliancesMinimum lot: N/AMaterial: Danpla, Foam, Carton
Company Profile
Contact Information
We look for mold maker as a partner, who can produce Molds of big size for 450 ton ~ 850 ton Injection machineWe look for cheaper packing material for the parts of Home Appliances
Purchasing Items
JP 03
14 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
AZUMANEJI CO., LTD
Establishment year : 1961Number of Employees : 30Factory Address : 2-10-1, Ishiwara, Sumida-ku, Tokyo, JapanFactory space (m2) : 380Charter Capital (USD) : 125,000Turnover in 2014 (USD) : 10,000,000Main Technology : Screws and industrial partsMain Customers : Assembly manufacturersQuality Certificates : ISO 9001, ISO 14001Other information : We have provided industrial parts satisfying special orders for more than half a century.
Person in charge : Mr. NGUYEN HOANG TUNG (for both Vietnamese and Japanese)Position : ManagerAddress (Office) : 609, Linh Nam Street, Hoang Mai District, Hanoi, VietnamTel : +84 - 4 - 3643 6054Fax : +84 - 4 - 3643 6055Email : [email protected] : http://www.azumaneji.co.jp
Purchasing Items
Company Profile
Contact Information
We look for casting and forging parts for automobiles and furniture.
Product name: BoltsUse for: AutomobilesMinimum lot: 30,000 pcsMaterial: S45C
Product name: ShaftsUse for: FurnitureMinimum lot: 1,000 pcsMaterial: SWRM10R
Product name: Pressing partsUse for: FurnitureMinimum lot: 120,000 pcsMaterial: SPCC
Product name: NutsUse for: FurnitureMinimum lot: 100,000 pcsMaterial: SS400
Product name: Pressing partsUse for: FurnitureMinimum lot: 5,000 pcsMaterial: SPHC
Product name: Lost-wax casting partsUse for: FurnitureMinimum lot: 3,000 pcsMaterial: SUS304
JP 04
15VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
BANDO MANUFACTURING (VIETNAM) CO., LTD
Establishment year : 2012Number of Employees : 65Factory Address : RF No.3, Thang Long II Industrial Park, Yen My District, Hung Yen Province, VietnamFactory space (m2) : 2,500Charter Capital (USD) : N/ATurnover in 2014 (USD) : N/AMain Technology : ManufacturingMain Customers : Motorcycle ManufacturersQuality Certificates : ISO9001, ISO14001Other information : N/A
Person in charge : Mr. HITOSHI DAIMONPosition : General Manager Address (Office) : Head Quarter : RF No.3 Thang Long II Industrial Park, Yen My district, Hung Yen province, vietnam HCMC Branch: 5 FL, Sunshine Building 74 C Nguyen Van Cu Street, Nguyen Cu Trinh Ward, Dist 1, HCM City, Tel : Head Quarter : +84 - 321 - 3974 986; HCMC Branch: +84 - 8-3838 5036Fax : Head Quarter : +84 - 321- 3974 911; HCMC Branch: +84 - 8-3920 6987 Email : Head Quarter : [email protected] (VIETNAMESE) HCMC Branch : [email protected]. (JAPANESE)Website : http://www.bando-bmvn.com/
Selling ItemsProduct name: Industrial Transmission Belt Use for: Drive past for Industrial equipmentMinimum lot: N/AMaterial: N/A
Product name: Automotive Transmission BeltUse for: Drive belt for automobileMinimum lot: N/AMaterial: N/A
Product name: Sunline Belt Use for: Light Duty Conveyor BeltMinimum lot: N/AMaterial: N/A
Product name: Tension Master Use for: Checking belt tensionMinimum lot: N/AMaterial: N/A
Company Profile
Contact Information
We are looking for die casting parts for motorbike / automobile and steel plate for our precision part
JP 05
16 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
CANON VIETNAM CO., LTD
Establishment year : 2001Number of Employees : 22,000Factory Address : Thang Long Factory: A-1, Thanglong Industrial Park, Dong Anh District, Hanoi, Vietnam Que Vo Factory : B-1, Que Vo Industrial Park, Que Vo District, Bac Ninh province, Vietnam Tien Son Factory: No.12, TS 10 Road, Tien Son Industrial Park, Tien Du district, Bac Ninh province, VietnamFactory space (m2) : 600,000 Charter Capital (USD) : 306,700,000 Turnover in 2014 (USD) : N/AMain Technology : Printing, Scanning, Cartridge Main Customers : End userQuality Certificates : ISO 9001:2000Other information : N/A
Person in charge : Mr. TAMOTSU MIZUHASHIPosition : Assistant General ManagerAddress (Office) : A-1, Thang Long Industrial Park, Dong Anh District, Hanoi, VietnamTel : +84 - 4-3881-2111Fax : +84 - 4-3881-1783Email : [email protected] : http://www.canon-cvn.com.vn
Company Profile
Contact Information
We are looking for Electrical / Mechanical / Packaging items for Printer / Scanner / Cartridge products.Priority is set for suppliers located in Vietnam
Product name: Foam, Resin, Mould DieUse for: Printer, Scanner, CartridgeMinimum lot: 2,500,000 pcsMaterial: Plastics
Product name: Roller, Shaft, Spring,RubberUse for: Printer & Scanner Minimum lot: 2,500,000 pcsMaterial: SWC, SUM24L…
Product name: Capacitor, motor, Inductor, Coil, TransformerUse for: Printer & Scanner Minimum lot: 2,500,000 pcsMaterial: Ceramic, Aluminum, Copper
Product name: Tape, Tube, Spur, Cap, Screw, Belt, E-ring, sheet insulation…Use for: Printer, Cartridge, ScannerMinimum lot: 2,500,000 pcsMaterial: PE, Silicon…
Product name: PCB bare boardUse for: Printer & Scanner Minimum lot: 2,500,000 pcsMaterial: FR1/4
Product name: USB cable, USB connector, FFCUse for: Printer & Scanner Minimum lot: 2,500,000 pcsMaterial: Aluminum, Copper
Purchasing Items
JP 06
17VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
CHIENOWA CO., LTD
Product name: Needle DetectorUse for: Sewing factoryMinimum lot: 1 pc Material: N/A
We are looking for the suppliers which manufacture and sell Magnet
Establishment year : 2014Number of Employees : 7Factory Address : 814/21 Su Van Hanh Street, Ward 12, District 10, HCM city, Vietnam.Factory space (m2) : 200Charter Capital (USD) : 150,000 Turnover in 2014 (USD) : N/AMain Technology : Sensor &controller DevelopmentMain Customers : N/AQuality Certificates : N/AOther information : Our company just established at the end of 2014. We can design the own circuit,own mechatronics.
Person in charge : Mr. GIANG CONG MINHPosition : ManegerAddress (Office) : 814/21 Su Van Hanh Street, Ward 12, District 10, HCM city, VietnamTel : +84 - 8 - 3663 4301Fax : N/AEmail : [email protected] : http://www.chienowa.com.vn
Selling Items
Product name: PCBUse for: in many wayMinimum lot: 1 pcMaterial: FR4
Company Profile
Contact Information
Purchasing ItemsProduct name: MagnetUse for: SensorMinimum lot: 6 pcsMaterial: Ferrite magnet
Product name: electronics componentsUse for: PCBAMinimum lot: depend on MOQMaterial: Semiconductor
JP 08
18 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
CURIOUS SEIKI VIET NAM CO., LTD
Establishment year : 2012/11Number of Employees : 37Factory Address : Lot3, TS25, Tien Son Industrial, Tu son district, Bac Ninh province, vietnamFactory space (m2) : 2,100Charter Capital (USD) : 3,000,000 Turnover in 2014 (USD) : 605,879 Main Technology : Precision cutting partsMain Customers : Denso manufacturing Vietnam co., LTD Hamaden Vietnam co., LTDQuality Certificates : ISO9001 (expected 2015/12)Other information : We help with the local procurement of a precision cutting parts.
Person in charge : Mr. TATSUO YAMAWAKI / Ms. LE VAN NGA Position : General Director / SupervisorAddress (Office) : Lot3, TS25, Tien Son Industrial, Tu son district, Bac Ninh province, VietnamTel : +84 - 241 - 3734 995Fax : +84 - 241 - 3734 085Email : [email protected] / [email protected] Website : N/A
Selling ItemsProduct name: Ferrous product Use for: Transmission control systemMinimum lot: 100,000 pcs/monthMaterial: S45C etc.
Product name: Stainless Steel productUse for: Air conditioner control systemMinimum lot: 40,000 pcs/monthMaterial: SUS304 etc.
Product name: Drawing barUse for: Material Minimum lot: 17t /monthMaterial: Ferrous, stainless steels, Aluminum
Product name: Aluminum productUse for: Brake control systemMinimum lot: 80,000 pcs/monthMaterial: A6061 etc.
Product name: Work benchesUse for: EquipmentMinimum lot: N/AMaterial: N/A
Company Profile
Contact Information
We help with the local procurement of a precision cutting parts.We look for the suppliers which has the desire for work.
Purchasing Items
Product name: Cutting tools Use for: CNC Automatic latheMinimum lot: N/AMaterial: N/A
JP 09
19VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
DENSO MANUFCTURING VIETNAM CO., LTD
Establishment year : 4/10/2001 received investment license Number of Employees : 3,800 Factory Address : Thang Long Industrial Park, Dong Anh District, Hanoi, VietnamFactory space (m2) : 56,000 (Factory: 22,800m2, Office:3,450m2)Charter Capital (USD) : 10,000,000Turnover in 2014 (USD) : 342,000,000Main Technology : Assembly Automotive ComponentMain Customers : Export to all over the world ( Car Maker)Quality Certificates : ISO TS 16949Other information : N/A
Person in charge : Mr. VU BA TIENPosition : Purchasing Technical SupervisorAddress (Office) : Plot E1, Thang Long Industrial Park, Dong Anh district Hanoi, VietnamTel : +84-4-38811608 (ext: 3434)Fax : +84-24-39590310 Email : [email protected] : http:// www.denso.com.vn
Purchasing Items/Selling ItemsProduct name: Die Cast PartUse for: AutomotiveMinimum lot: 20,000 pcs/mothMaterial: Aluminum-Die Cast
Product name: Bolt + Bender PartUse for: AutomotiveMinimum lot: 200,000 pcs/moth Material: SB25
Product name: Machining PartUse for: AutomotiveMinimum lot: 100,000 pcs/mothMaterial: SUS304, A6061-T6
Product name: Stamping PartUse for: AutomotiveMinimum lot: 30,000 pcs/mothMaterial: NM-CS-AK, SPCC-SD, SÚ631J1
Company Profile
Contact Information
We are looking for Precision Machining, Die Casting, Stamping- Deep Drawing, Sintering ( All is for automotive)
Product name: Seal Oil+ GasketUse for: AutomotiveMinimum lot: 100,000 pcs/mothMaterial: EPDM43, F979
Product name: Plastic GearUse for: AutomotiveMinimum lot: 100,000 pcs/mothMaterial: TW241F6 9C1970, TW271F6 J10, TW200B6 NC
JP 07
20 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
ENSHU SANKO VIETNAM CO., LTD
Establishment year : 2011Number of Employees : 100Factory Address : Lot H4-2, Que Vo Industrial Zone, Que Vo district, Bac Ninh province, VietnamFactory space (m2) : 15,097Charter Capital (USD) : 3,500,000Turnover in 2014 (USD) : 2,000,000 Main Technology : Plating, and Machining Main Customers : Automotive, Motorcycle, and OA makersQuality Certificates : ISO9001Other information : We are the specialists for the “special process”.
Person in charge : Mr. YOICHI YAMAGISHI / Mr. VO DONG VIENPosition : General Director /General ManagerAddress (Office) : Lot H4-2, Que Vo Industrial Zone, Que Vo district, Bac Ninh province, VietnamTel : +84 - 241- 395 2121Fax : +84 - 241- 395 2123Email : [email protected] / [email protected] : http://www.esv.com.vn
Company Profile
Contact Information
We look for some materials for plating (surface finishing) & machining.
Product name: Chemicals Use for: Surface Treatment(Plating)Minimum lot: N/AMaterial: N/A
Product name: Stainless Steel, Copper, PVC, and PP Plate and BarUse for: JigMinimum lot: N/AMaterial: SUS, Cu, PVC , PP
Product name: Steel MaterialUse for: Die partsMinimum lot: N/AMaterial: S45C, SUJ, SCM
Product name: Cutting ToolsUse for: MachiningMinimum lot: N/AMaterial: N/A
Product name: Highly Refined MetalsUse for: Plating Minimum lot: N/AMaterial: Zinc, Copper, Nickel, etc,.
Product name: Plastic processing partsUse for: EquipmentMinimum lot: N/AMaterial: PP, PVC,FRP
Purchasing Items
JP 10
21VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
FUJI XEROX HAI PHONG CO., LTD
Establishment year : 2012Number of Employees : 1,700Factory Address : No.In1-1 & 1-3, VSIP Hai Phong city, VietnamFactory space (m2) : 176,000Charter Capital (USD) : 36,000,000Turnover in 2014 (USD) : N/AMain Technology : Multifunction Devices, PrintersMain Customers : Fuji Xerox Co.,LTDQuality Certificates : N/AOther information : N/A
Person in charge : Mr.TAKAYUKI YAMATOPosition : Procurement ManagerAddress (Office) : No.In1-1 & 1-3,VSIP Hai Phong city, VietnamTel : N/AFax : N/AEmail : [email protected] : N/A
Product name: Rubber RollUse for: PrinterMinimum lot: N/AMaterial: N/A
Product name: Photo SensorUse for: PrinterMinimum lot: N/AMaterial: N/A
Product name: FFCUse for: PrinterMinimum lot: N/AMaterial: N/A
Product name: PCBUse for: PrinterMinimum lot: N/AMaterial: N/A
Company Profile
Contact Information
Product name: PWBA ComponentsUse for: PrinterMinimum lot: N/AMaterial: N/A
Product name: TransformerUse for: PrinterMinimum lot: N/AMaterial: N/A
Purchasing Items
Looking for PWBA components. (relay / thermistor / diode / xtal / fuse / SW/ inlet / heat sink…)
JP 13
22 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
FUJIKIN VIET NAM CO., LTD
Establishment year : 2002Number of Employees : 454Factory Address : H-2B plot,Thang Long Industrial Park Dong Anh District, Hanoi, VietnamFactory space (m2) : 21,000Charter Capital (USD) : 9,000,000Turnover in 2014 (USD) : 19,000,000Main Technology : Manufacturing of Valves and FittingsMain Customers : Fujikin Carp Group( Affiliated companies)Quality Certificates : ISO 9001:2008, ISO 14001:2004Other information : N/A
Person in charge : Mr. YUTAKA KANEKOPosition : General DirectorAddress (Office) : H-2B plot,Thang Long Industrial Park, Dong Anh District, Hanoi, VietnamTel : +84-4-3881 2566Fax : +84-4-3881 2577Email : [email protected] : http://www.fujikin.co.jp/fujikinHP_e/index.asp
Product name: SleevesUse for: Manufacturing of SemiconductorMinimum lot: 1,000 pcsMaterial: Stainless steel
Product name: FittingsUse for: Manufacturing of SemiconductorMinimum lot: 1,000 pcsMaterial: Stainless steel
Product name: Parts for Automatic ValvesUse for: Manufacturing of SemiconductorMinimum lot: 1,000 pcsMaterial: Aluminum, PTFE
Product name: Parts for Manual ValvesUse for: Manufacturing of Semiconductor and otherMinimum lot: 1,000 pcsMaterial: Aluminum, PTFE
Company Profile
Contact Information
Product name: FittingsUse for: Manufacturing of SemiconductorMinimum lot: 1,000 pcsMaterial: Stainless steel
Product name: Sub-materialsUse for: Packing partsMinimum lot: 5,000 pcsMaterial: Resin, etc
Purchasing Items
JP 11
23VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
FUKUOKARASHI VIETNAM CO., LTD
Establishment year : 2013Number of Employees : 7Factory Address : B-2 Long Duc Industrial Park, Long Duc Ward, Long Thanh District, Dong Nai Province, VietnamFactory space (m2) : 768Charter Capital (USD) : 115,000Turnover in 2014 (USD) : N/AMain Technology : Manufacturing metal precision partsMain Customers : China, Vietnam, JapanQuality Certificates : N/AOther information : We guarantee “Sabae-Fukui” quality.
Person in charge : Mr. TOSHIMITSU YAMAMOTOPosition : General DirectorAddress (Office) : B-2 Long Duc Industrial Park, Long Duc Ward, Long Thanh District, Dong Nai Province, VietnamTel : +84 - 61 - 368 1200Fax : +84 - 61 - 368 1180Email : [email protected] : http://www.fukuokarashi.jp
Selling Items
Product name: Precision partsUse for: Precision MachineMinimum lot: NegotiableMaterial: Stainless
Product name: Precision partsUse for: MachineMinimum lot: NegotiableMaterial: Stainless
Product name: Precision partsUse for: Precision MachineMinimum lot: NegotiableMaterial: Titanium
Company Profile
Contact Information
We look for the company purchasing metal precision parts which we manufacture and sell.
Product name: Precision partsUse for: Precision MachineMinimum lot: NegotiableMaterial: Tungsten
Product name: Precision partsUse for: Precision MachineMinimum lot: NegotiableMaterial: Stainless
Product name: Hinge partsUse for: SpectaclesMinimum lot: NegotiableMaterial: Nickel Silver
JP 12
24 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
HAMADEN VIETNAM CO., LTD
Establishment year : October 2008Number of Employees : 2,000 (end of Jun.2015)Factory Address : Thang long II Industrial Park, Yen My district, Hung Yen province, VietnamFactory space (m2) : 29,000 Charter Capital (USD) : 32,000,000Turnover in 2014 (USD) : N/AMain Technology : Manufacturing & Sale of Automotive component partMain Customers : Advics, DENSO- Subsidiaries including, DENSO MANUFACTURING VIETNAMQuality Certificates : ISO/TS 16949Other information : Start of Operation on January 2012
Person in charge : Mr. TOSHIO MIYAWAKI, Ms. PHAM THI MENPosition : Director, SupervisorAddress (Office) : Plot A4, Thang Long II IP, Yen My district, Hung Yen provine, vietnam Tel : +84 - 3213 - 589 388Fax : +84 - 3213 - 589 518Email : [email protected], : [email protected] : N/A
Company Profile
Contact Information
HAMADEN VIETNAM would like to find the suppliers for Automobile component parts such as (stamping, machining, plastic molding, rubber, surface treatment, heat treatment…) to assembly below product:
Product name: DCV3Use for: CAR EMSMinimum lot: 100,000 pcsMaterial: N/A
Product name: AVSUse for: CAR EMSMinimum lot: 500,000 pcsMaterial: N/A
Product name: DCTUse for: CAR EMSMinimum lot: 50,000 pcsMaterial: N/A
Product name: GM coilUse for: CAR EMSMinimum lot: 120,000 pcsMaterial: N/A
Product name: VCTUse for: CAR EMSMinimum lot: 50,000 pcsMaterial: N/A
Product name: LL-CVTUse for: CAR EMSMinimum lot: 250,000 pcsMaterial: N/A
Purchasing Items
JP 07
25VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
HIMEJI ELECTRIC PLATING VIETNAM CO., LTD
Establishment year : 2011Number of Employees : 30Factory Address : Lot 8.13, Khai Son IZ, Thuan Thanh District, Bac Ninh Province, Vietnam Factory space (m2) : 1,200 Charter Capital (USD) : 969,802Turnover in 2014 (USD) : 663,613Main Technology : Hard Chrom PlatingMain Customers : FCC, Strong Way, ExedyQuality Certificates : N/AOther information : N/A
Person in charge : Mr. HIROSHI HATANAKAPosition : Factory ManagerAddress (Office) : Lot 8.13, Khai Son IZ, Thuan Thanh District, Bac Ninh Province, Vietnam Tel : +84-241-3798 618Fax : +84-241-3798 619Email : [email protected] : http://himeji-mekki.co.jp/
Purchasing Items/Selling ItemsProduct name: BOSS Use for: MotercycleMinimum lot: 5,000 pcsMaterial: Steel
Product name: BOSS Use for: MotercycleMinimum lot: 2,000 pcsMaterial: Steel
Product name: CAMUse for: MotercycleMinimum lot: 10,000 pcsMaterial: Steel
Product name: MOLDUse for: N/AMinimum lot: 1 pcMaterial: Steel
Company Profile
Contact Information
We are hard chrome plating of mainly motorcycle parts. We look for the suppliers which manufacture and sell plating jig (turning process, resin coating, welding)
Product name: PartsUse for: MachineMinimum lot: 1 pcMaterial: Steel
JP 15
26 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
HONDA LOCK VIETNAM CO., LTD
Establishment year : 2008Number of Employees : 503 (End of Jun., 2015)Factory Address : DongVan II Industrial Zone DuyTien District, HaNam Province, VietnamFactory space (m2) : 40,000Charter Capital (USD) : 4,546,000 Turnover in 2014 (USD) : 33,800,000Main Technology : Assembly Key setMain Customers : Honda Vietnam Quality Certificates : ISO 9001:2008, ISO 14001:2004Other information : One of the best suppliers of Honda Vietnam
Person in charge : Mr. NGUYEN DUC LINHPosition : Sales & Purchase ManagerAddress (Office) : DongVan II Industrial Zone DuyTien District, HaNam Province, Vietnam Tel : +84 - 351- 626 2042Fax : +84 - 351- 626 2040Email : [email protected] Website : http://www.hondalock.co.jp/english/global/vietnam-lang.html
Company Profile
Contact Information
We are looking for the suppliers in a field of Stamping, Plastic, Rubber, Plating for Key Set, Door Mirror of Motorbike and Car
Product name: Key SetUse for: MotorbikeMinimum lot: 100 pcsMaterial: Assembly
Product name: Key SetUse for: MotorbikeMinimum lot: 100 pcsMaterial: Assembly
Product name: Key SetUse for: MotorbikeMinimum lot: 100 pcsMaterial: Assembly
Product name: Door MirrorUse for: CarMinimum lot: 100 pcsMaterial: Assembly
Product name: Steering Lock SwitchUse for: CarMinimum lot: 100 pcsMaterial: Assembly
Product name: Door HandleUse for: CarMinimum lot: 100 pcsMaterial: Assembly
Purchasing Items/Selling Items
JP 14
27VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
ICS VIETNAM CO., LTD
Establishment year : 09/2012Number of Employees : 13 persons (Vietnamese), 02 persons (Japanese)Factory Address : Tan Truong IZ, Cam Giang district, Hai Duong Province, vietnamFactory space (m2) : 10,000Charter Capital (USD) : 4,000,000 Turnover in 2014 (USD) : N/AMain Technology : Vacuum heat treatment, oil quenching, brazingMain Customers : Auto part and mold product companiesQuality Certificates : N/AOther information : The quality is the same as Japanese
Person in charge : Mr. SOUTOME TAKUMI / Mr. VU VAN VIET Position : Factory Manager / Sales assistantAddress (Office) : Tan Truong IZ, Cam Giang district, Hai Duong ProvinceTel : +84 - 320 - 362 6165Fax : +84 - 320 - 362 6166Email : [email protected]/ [email protected] : http://ics-vn.com
Selling ItemsProduct name: AnnealingUse for: Stress relief, Solution, Homogenization…Minimum lot: N/AMaterial: Carbon Steel, Steel Alloys, Titanium alloys, Ni-base alloys, Co-based alloys, Steel alloys…Product name: Magnetic AnnealingUse for: Stress relief, Low distortion, Magnetic properties improvement…Minimum lot: N/AMaterial: Permalloy, Invar, Kovar….
Product name: Quenching, TemperingUse for: Non-oxidation, Low distortion…Minimum lot: N/AMaterial: Carbon Steel, Steel Alloys, Martensitic stainless steel…
Company Profile
Contact Information
We are looking for customers dealing with processing products and molds which are required heat treatment and brazing. We are looking for suppliers having processing of stainless steel fixture, sale wire, foil, mesh, brazing material andcarbon steel products.
Purchasing ItemsProduct name: SUS Material, brazing material… Use for: Jig of heat treatment (wire, sheet and basket), brazing…Minimum lot: N/AMaterial: SUS304, SUS310,…
Product name: Precipitation and Age HardeningUse for: Precipitation, CuringMinimum lot: N/AMaterial: Beryllium steel, precipitation copper alloys, precipitation hardening stainless steel…
Product name: BrazingUse for: Junction meterialMinimum lot: N/AMaterial: Sliver Alloys, Copper Alloys, Nickel Alloys…
JP 16
28 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
IHI CORPORATION
Establishment year : 1853Number of Employees : 28,533Factory Address : 8 Factories in JapanFactory space (m2) : N/ACharter Capital (USD) : 1,071,000,000Turnover in 2014 (USD) : 14,558,000,000Main Technology : Industrial Machinery, Compressors, Logistics Systems, Agricultural Machinery, etcMain Customers : N/AQuality Certificates : ISO9001Other information : N/A
Person in charge : Mr. TOSHIO MITSUIPosition : Procurement ManagerAddress (Office) : 515, Sun Red River Building, 23 Phan Chu Trinh, Hanoi, Vietnam Tel : +84 - 93 222 8977Fax : +84 - 4 - 3934 5303Email : [email protected] Website : http//www.ihi.co.jp
Company Profile
Contact Information
We are looking for the suppliers which manufacture the parts for Industrial Machinery, Compressors, Logistics Systems, Agricultural Machinery, etc
Product name: DiffuserUse for: CompressorMinimum lot: 1 pc/lotMaterial: Al or SUS
Product name: Sheet Metal for enclosureUse for: CompressorMinimum lot: 40 pcs/lotMaterial: SS
Product name: Fabricated ItemUse for: Agricultural MachineMinimum lot: 100 pcs/lotMaterial: SS
Product name: Machining ItemUse for: Industrial MachineMinimum lot: N/AMaterial: SS, SUS
Product name: Fabricated ItemUse for: Agricultural MachineMinimum lot: 100 pcs/lotMaterial: SS
Product name: PalletUse for: Parking SystemMinimum lot: 35 pcs/lotMaterial: SS
Purchasing Items
JP 20
29VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
ITSUWA VIETNAM CO., LTD
Product name: Grinding WheelUse for: Grinding ProcessMinimum lot: 1 pcMaterial: N/A
Our purchasing items are…LED Unit Assembly / Home Appliances (Frying Pan, etc.) / PCB / Motor / LCD / Plastic Paint, etc.Our selling items are…Grinding Wheel / Processing Oil / Detergent / Anti-Rust Oil / Industrial Filters / EDM Wire, etc.
Establishment year : 2009Number of Employees : 20Factory Address : N/AFactory space (m2) : N/ACharter Capital (USD) : 100,000Turnover in 2014 (USD) : 16,000,000Main Technology : Import&Export / Sales Agent / EMS(Assy)Main Customers : Panasonic / NIDEC / HONDA / YAMAHAQuality Certificates : N/AOther information : VMI (in NWH&BWH) / JIT Delivery /
Person in charge : Mr. MIYAZOE YUPosition : DirectorAddress (Hanoi Office) : 9th Floor, ICON4 Building, 243A De La Thanh Street, Lang Thuong Ward, Dong Da District, HanoiTel : +84 - 43 - 773 5125 / Fax : +84 - 43 - 773 7376Address (HCM Office) : No.93, Road 2, Hung Gia 2, Tan Phong Ward, District7, Ho Chi Minh Tel : +84 - 43-773 5125 / Fax: +84 - 43-773 7376Email : [email protected] : http://www.itsuwa.co.jp http://www.itsuwa.vn
Selling Items
Product name: LED Unit AssyUse for: LightingMinimum lot: 1,000 pcsMaterial: Nil
Company Profile
Contact Information
Purchasing Items
Product name: Processing Oil, Detergent, Anti-Rust OilUse for: ProcessMinimum lot: 1 drum/1 canMaterial: N/A
Product name: Industrial FilterUse for: Filtering, Washing,Surface TreatmentMinimum lot: 25-50 pcsMaterial: N/A
Product name: EDM WireUse for: Mold MakingMinimum lot: 20 kgMaterial: N/A
Product name: Frying PanUse for: CookingMinimum lot: 1,000-3,000 pcsMaterial: AL or Diecast
JP 17
30 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
IWASEyA VIET NAM CO., LTD
Establishment year : 2013Number of Employees : 10Factory Address : Plot II, Dong Vang, Dinh Tram Industrial Park, Viet Yen District, Bac Giang province, VietnamFactory space (m2) : 3,250Charter Capital (USD) : 1,500,000Turnover in 2014 (USD) : N/AMain Technology : Precision mechanical machining, Assembly, Wire windingMain Customers : N/AQuality Certificates : N/AOther information : Mass production, even a small amount of machining will correspond. Please to contact us
Person in charge : Mr. HATORI HIKARUPosition : Managing DirectorAddress (Office) : Plot II, Dong Vang, Dinh Tram Industrial Park, Viet Yen District, Bac Giang province, VietnamTel : +84 - 240-3818 230Fax : +84 - 240-3818 231Email : [email protected] : http://iwaseya.co.jp
Company Profile
Contact Information
We supllying precision mechanical machining, assembly, wire winding and processing design tools for motorcycle and automobile.We are looking for custumer.
Product name: PulleyUse for: CARMinimum lot: N/AMaterial: S45C
Product name: High pressure pump cover Use for: CARMinimum lot: N/AMaterial: S45C
Product name: Choke coil Use for: CARMinimum lot: N/AMaterial: Copper wire
Selling Items
JP 18
31VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
JAPAN MIMTECH TOKO. CO., LTD
Establishment year : 2011Number of Employees : 30Factory Address : Tan Truong IZ, Hai Duong Province, VietnamFactory space (m2) : 2,034Charter Capital (USD) : 1,200,000Turnover in 2014 (USD) : 700,000Main Technology : Metal Injection Molding (MIM)Main Customers : N/AQuality Certificates : N/AOther information : We are the only one company in Vietnam which manufactures MIM, called Metal Injection Moldings. MIM supplies metal products that is small, complicated shapes, high hardness, and large lot of orders without cutting process because it is all made by injecting.
Person in charge : Mr. GO OKIZAKI Position : Deputy DirectorAddress (Office) : Tan Truong IZ, Hai Duong Province, VietnamTel : +84 -164 - 388 0680Fax : +84 - 320 - 2626 009Email : [email protected] : http://tokotsusho.co.jp
Product name: SylinderUse for: KeysMinimum lot: 4,000 pcsMaterial: SUS420J2
Product name: LeverUse for: sinkMinimum lot: 10,000 pcsMaterial: SUS316L
Product name: Joint BlockUse for: hinge Minimum lot: 10,000 pcsMaterial: SUS420J2
Product name: Nozzle valveUse for: TurboMinimum lot: 20,000 pcsMaterial: Inconel
Company Profile
Contact Information
Product name: ForceptUse for: medical cameraMinimum lot: 40000 pcsMaterial: SUS316L
Purchasing Items
We look for the suppliers in a field of Metal molds/ Heat treatment/ Surface treatment.
JP 19
32 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
JFE SHOJI GROUPSteel and metal product total solutions We need metal products with special treatment(by CLEANVY)
Product name: Aluminium CoverUse for: Aluminium Cover for Washing TankMinimum lot: 2 pcsMaterial: Aluminium A5083 or A5052
Product name: FGE201Use for: Cutting / Grinding Minimum lot: 18L or 200LMaterial: Cutting for Steel. Aluminum, Copper, etc.
Product name: 10% Dish End PlateUse for: Distillation TankMinimum lot: 5 pcsMaterial: SUS304
Product name: Actrel seriesUse for: Cleaning (Degrease)Minimum lot: 1/drumsMaterial: Hydrocarbon/Oil base
Selling Items
Establishment year : January 1954Number of Employees : 1,287 ( As of March 31,2015)Factory Address : Otemachi Financial City North Tower, 1-9-5, Otemachi, Chiyoda-ku, Tokyo, 100-8070Factory space (m2) : N/ACharter Capital (JPy) : 14,500,000,000Turnover in 2014 (JPy) : 1,934,000,000,000 (consolidated accounts)Main Technology : Trading Main Customers : N/AQuality Certificates : N/AOther information : N/A
Person in charge : Mr. FUMIO OTAKE / Ms. PHAM THI NGOC TRAM Position : Chief of Representative / Sales CoordinatorAddress (Office) : Saigon Trade Center, Unit 1112 37 Ton Duc Thang Street, District 1, Hochiminh City, vietnamTel : +84 - 8-3910 1986, HP/+84 - 90879 1168Fax : +84 - 8-3910 1987Email : [email protected] Website : http://www.jfe-shoji-ele.co.jp/
Company Profile
Contact Information
by CLEANVy (Thailand) Purchasing Items
by yUSHIRO MALAySIA by ExxonMobil Chemical Asia Pacific
JP 21
Product name: Cleaning systemUse for: Cleaning productsMinimum lot: 1 setMaterial: SOS, Steel, Copper, plastic.
by CLEANVy (Thailand)
33VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
JTEC HANOI CO., LTD
Establishment year : 2007Number of Employees : 600Factory Address : P-14 Thang Long Industrial Park, Dong Anh District, Hanoi, VietnamFactory space (m2) : 7,650Charter Capital (USD) : 9,000,000 Turnover in 2014 (USD) : 17,750,000Main Technology : Manufacture and sale of wire harnesses Main Customers : KOMATSU KOBELCO Quality Certificates : N/AOther information : Related plant in Dalian, China
Person in charge : Mr. HA TRONG HUNGPosition : Production ManagerAddress (Office) : P-14 Thang Long Industrial Park,Dong Anh District, Hanoi, VietnamTel : +84 - 43-955 0209Fax : +84 - 43-955 0210Email : [email protected] : http://www.toa-ele.co.jp
Product name: Various cables and wiring harnessesUse for: Construction machineryMinimum lot: N/AMaterial: Copper wire and Brass and Vinyl.Product name: A variety of cableUse for: construction machinery Minimum lot: N/AMaterial: AVS,AVSS,AEX,CAVS kind of color
Product name: Blade type fuseUse for: Automotive and construction machineryMinimum lot: 1,000 pcsMaterial: N/A
Company Profile
Contact Information
The cables and the electronic components of wire harness and electric control equipment which is used for construction machinery and industrial machinery.
Purchasing Items/Selling Items
JP 22
34 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
KANETSU VIETNAM CO., LTD
Establishment year : 2009Number of Employees : 7Factory Address : N/AFactory space (m2) : N/ACharter Capital (USD) : N/ATurnover in 2014 (USD) : 2,000,000Main Technology : N/AMain Customers : N/AQuality Certificates : N/AOther information : N/A
Person in charge : Mr. TAKESHI NAGATAPosition : General DirectorAddress (Office) : 3rd Floor, PDD Office Building,162 Pasteur St, Ben Nghe Ward, Dist 1, HCMC, VietnamTel : +84 - 8-3822 8560Fax : +84 - 8-3827 7904Email : [email protected] : http:// www.kanetsu.com.vn
Selling Items
Product name: Terminals and ConnectorsUse for: N/AMinimum lot: N/AMaterial: N/A
Product name: Electric Cables and WiresUse for: N/AMinimum lot: N/AMaterial: N/A
Product name: Electric Cables and WiresUse for: N/AMinimum lot: N/AMaterial: N/A
Product name: MCCBUse for: N/AMinimum lot: N/AMaterial: N/A
Product name: Other Electronics EquipmentsUse for: N/AMinimum lot: N/AMaterial: N/A
Company Profile
Contact Information
We are looking for electric parts.
Purchasing Items
Product name: Other Electrical PartsUse for: N/AMinimum lot: N/AMaterial: N/A
JP 23
35VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
KOM VIETNAM CO., LTD
Establishment year : 2011Number of Employees : 52 (included 2 Japanese)Factory Address : Plot17B, Quang Minh Industrial Zone, Me Linh Distrit, Hanoi, VietnamFactory space (m2) : 960Charter Capital (USD) : 400,000Turnover in 2014 (USD) : N/AMain Technology : Lathe & Milling Machining for Metal PartsMain Customers : N/AQuality Certificates : N/AOther information : N/A
Person in charge : Mr. TSUYOSHI IWASAKI Position : General DirectorAddress (Office) : Plot17B, Quang Minh Industrial Zone, Me Linh Distrit, Hanoi, VietnamTel : +84-4-3959-0292Fax : +84-4-3959-0294Email : [email protected] : http://fact-link.com.vn/home/komvn
Selling ItemsProduct name: Jig from 1pc Use for: Customer’s processing jigMinimum lot: 1 pcMaterial: SS, SC, SUS, Al, Br, POM, MC Nylon etc.
Product name: Mass production machiningUse for: Customer’s productionMinimum lot: 5,000 pcsMaterial: SS, SC, SUS, Al, Br, POM, MC Nylon etc.
Product name: Gear CuttingUse for: GearMinimum lot: 1 pcMaterial: SK4 etc
Product name: Small lot many kinds Parts MachiningUse for: Industrial MachineMinimum lot: 1 pcMaterial: SS, SC, SUS, Al, Br, POM, MC Nylon etc.
Product name: Surface TreatmentUse for: Many kinds of partsMinimum lot: 1 pcMaterial: SS400 etc
Company Profile
Contact Information
We’re Metal Machining Company. We need material, Heat Treating, Surface Treating & Gear Cutting supplier.
Purchasing Items
Product name: Metal & Resin materialUse for: Many kinds of partsMinimum lot: N/AMaterial: SS, SC, SUS, Al, Br, POM, MC Nylon etc.
JP 24
36 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
KTC HANOI CO., LTD
Establishment year : 2004Number of Employees : 250Factory Address : Tan Quang, Van Lam District, Hung Yen Province, VietnamFactory space (m2) : 12,500 Charter Capital (USD) : 3,400,000 Turnover in 2014 (USD) : 8,745,000Main Technology : Rubber mixing, pressing and grindingMain Customers : Canon Vietnam, Canon Hi-tech,Canon Business Machines,Brother Industries (Vietnam), Diamond Electric, CKD Corporation,Iko Thompson Vietnam,...Quality Certificates : ISO 9001:2008 ISO 14001:2004
Person in charge : Mr. HIGUCHI MOTOHARUPosition : Factory ManagerAddress (Office) : Tan Quang, Van Lam District, Hung Yen Province, VietnamTel : + 84 - 321 - 3791 563 (ext 5 ) Fax : + 84 - 321 - 3791 573Email : [email protected] : http://twoone.jp / www.fact-link.com.vn/home/ktcvn
Selling ItemsProduct name: Rubber Rollers Use for: Printer, fax machinesMinimum lot: 2 millions pcsMaterial: Iron shaft, Plastic shaft
Product name: O-ringUse for: Motorbike, automobileMinimum lot: 100K pcsMaterial: NBR, EPDM, ACM
Product name: Iron shaftsUse for: Printer, fax machinesMinimum lot: N/AMaterial: iron
Product name: ProtectorsUse for: Motorbike, automobileMinimum lot: 300K pcsMaterial: Silicon
Product name: Silicon, chemicalsUse for: Motorbike, automobile and othersMinimum lot: N/AMaterial: Silicon, chemicals
Company Profile
Contact Information
We look for suppliers of iron shafts, plastic shafts, rubber and silicon
Purchasing Items
Product name: Plastic shaftsUse for: Printer, fax machinesMinimum lot: N/AMaterial: Plastic
JP 25
37VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
KyOEI DIETECH VIET NAM CO., LTD
Establishment year : 2005Number of Employees : 32 peoples (1 Japan ), < February, 2015>Factory Address : Unit 5, Plot N-1, Thang Long Apartment Factory Thang Long Industrial Park, Dong Anh district, HaNoi. Factory space (m2) : 495 Charter Capital (USD) : 700,000Turnover in 2014 (USD) : 1,436,846Main Technology : Design, manufacture of dies, jigs, Machining die set (out-in), Design Cad / camMain Customers : SEI Electronic components (Vietnam) Co.,LTD, Chiyoda Integre Vietnam Co.,LTD , Meiko Electronics Vietnam Co.,LTDQuality Certificates : ISO9001 (2000)Other information : With a staff of qualified, enthusiastic and eager to learn, many of whom have been involved in the training at main company in Japan, we believe that we can provide the products and services at highest quality to our customers.
Person in charge : Mr. AKIHIRO KOBAYASHIPosition : DirectorAddress (Office) : Unit 5, Plot N-1, Thang Long Apartment Factory Thang Long Industrial Park, Dong Anh district, Ha Noi. Tel : +84 - 4-3951 6388Fax : +84 - 4-3951 6389 Email : [email protected] : http://vtown.vn/company/kyoei-dietech-vietnam.html
Selling ItemsProduct name: Ananuki moldUse for: FPCMinimum lot: customer requestMaterial: Iron
Product name: Inachange moldUse for: FPC(stamp, sticker,…)Minimum lot: customer requestMaterial: Iron
Product name: Compando moldUse for: PCB, electronic components.Minimum lot: customer requestMaterial: Iron
Product name: Fixture jigUse for: jigs for PCB and electronic componentsMinimum lot: customer requestMaterial: Iron
Company Profile
Contact Information
We are looking for suppliers in the field of manufacturing molds and Jig technologyWe provide various type of press die , jig as well as repairing and maintenance services
Product name: Combination moldUse for: PCB, electronic componentsMinimum lot: customer requestMaterial: Iron
Product name: Set plate moldUse for: PCB, electronic componentsMinimum lot: Customer requestMaterial: Iron
JP 26
38 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
VIETNAM MIE CO., LTD
Product name: Plastic Mold Parts Use for: AutomobilesMinimum lot: Approx. 1,000pcsMaterial: PBT,PPS,PA66 etc
We look for the suppliers in the field of plating technology and bush makers
Establishment year : Nov. 2011Number of Employees : 137Factory Address : Road A5,Pho Noi A Industrial Park, Dinh Du Commune, Van Lam district Hung Yen Province, Viet NamFactory space (m2) : 5,000Charter Capital (USD) : 8,750,000Turnover in 2014 (USD) : 4,872,000Main Technology : Production of Precision Stamping Parts. Insert Molding Parts and Molding Parts.Main Customers : DENSO, Sumitomo DensoQuality Certificates : N/AOther information : We produce automobile parts with dies manufactured by applying state-of-the-art technology and skills.
Person in charge : Mr. YUDAI HIRAMOTOPosition : Sales managerAddress (Hanoi Office) : 564-1 , Handa Tsu, Mie, 514-0823 JapanTel : +81-59-228-0103Fax: : +81-59-383-1148Email : [email protected] : http://www.miekin.co.jp
Selling Items
Product name: PlatingUse for: N/AMinimum lot: N/AMaterial: Au, Sn, Ni, Cu etc
Company Profile
Contact Information
Purchasing Items
Product name: Press PartsUse for: AutomobilesMinimum lot: Approx. 1,000pcsMaterial: Cu(C2600,C1020),SUS etc
Product name: BushUse for: N/AMinimum lot: N/AMaterial: Metal
JP 27
39VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
MINATO RUBBER VIETNAM CO., LTD
Establishment year : 2013Number of Employees : 14Factory Address : Dong Van II IZ , Duy Tien district , Ha nam province, VietnamFactory space (m2) : 2,100 Charter Capital (USD) : 10,000Turnover in 2014 (USD) : 200,000Main Technology : Rubber manufacturingMain Customers : MINATO RUBBER CO.,LTDQuality Certificates : PlanOther information : N/A
Person in charge : Mr. TAKESHI SATOPosition : General DirectorAddress (Office) : Dong Van II IZ , Duy Tien district , Ha nam province, VietnamTel : + 84 - 351 - 6262 155Fax : N/AEmail : [email protected] : http://www.minato-g.co.jp
Product name: Vacuum padUse for: Vacuum machinesMinimum lot: N/AMaterial: NBR, Urethane, Polychloroprene, EPDM, Silicone, Fluoro rubber, Electro conductive NBR, Electro conductive Silicone, Electro conductive Fluoro rubber
Product name: Stopper rubberUse for: Stop parking of carMinimum lot: N/AMaterial: SBR
Product name: PackingUse for: Car, industry machinesMinimum lot: N/AMaterial: Polychloroprene, H-NBR, Fluoro rubber
Product name: BootUse for: Car, industry machinesMinimum lot: N/AMaterial: Polychloroprene, EPDM, Silicone
Company Profile
Contact Information
We look for customer and rubber molding companyWe also look for the rubber matterial suppliers and rubber manufacturing suppliers
Product name: Transformer’s packingUse for: TransformerMinimum lot: N/AMaterial: NBR, EPDM
Product name: Silicone packing, silicone buttonUse for: Industry machines, Minimum lot: N/AMaterial: Silicone
Purchasing Items/Selling Items
JP 28
40 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
NAGOyA KATAN CO., LTD
Establishment year : 1954Number of Employees : 14Factory Address : 4-5, Kuban-cho, Minato Ward, Nagoya City, Aichi Prefecture, JapanFactory space (m2) : 1,085Charter Capital (USD) : 583,000Turnover in 2014 (USD) : 5,392,400Main Technology : Casting, MachiningMain Customers : PUMP, VALVE, MOTOR, etcQuality Certificates : N/AOther information : Source Castings, Lost Wax, Machining, and OEM products from abroad (China, Vietnam).
Person in charge : Mr. WAKATO YAMADAPosition : Senior Managing DirectorAddress (Office) : 4-5, Kuban-cho, Minato Ward, Nagoya City, Aichi Prefecture, JapanTel : +81-52-651 5491Fax : +81-52-651 5499Email : [email protected] Website : http:// www.nagoyakatan.com
Company Profile
Contact Information
Our purchasing Items are Cast iron, Ductile iron, Aluminum and Copper Casting, Lost Wax (Stainless, Steel), Welding, Forgings, Machining, Plastic, Rubber, others. We look for customers who will buy the Filter
Selling ItemsProduct name: FilterUse for: Filtration deviceMinimum lot: 1 pcMaterial: FC200,etc.
Purchasing ItemsProduct name: CoverUse for: PumpMinimum lot: 300 pcsMaterial: FC200
Product name: PipeUse for: PumpMinimum lot: 200 pcsMaterial: FC200
Product name: CoverUse for: PumpMinimum lot: 300 pcsMaterial: SCS13
Product name: CaseUse for: PumpMinimum lot: 300 pcsMaterial: SCS13
Product name: BracketUse for: TrackMinimum lot: 500 pcsMaterial: SS400
JP 29
41VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
NOBLE ELECTRONICS VIETNAM CO., LTD
Establishment year : 2006Number of Employees : 500 Factory Address : Hoa Lac Hi-Tech Park, Thach That District , Hanoi, VietnamFactory space (m2) : 30,000 Charter Capital (USD) : 4,999,000 Turnover in 2014 (USD) : 27,000,000 Main Technology : Electronic components Main Customers : Panasonic, Sony, Nikon, Samsung…Quality Certificates : ISO 9001:2008 ISO 14001:2004 Other information : Design, function, reliability… By steadily focusing on the ever-diversifying needs of the times, we provide support for evolving electronic devices.
Person in charge : Ms. DU THI LOANPosition : Senior Manager Address (Office) : Hoa Lac Hi-Tech Park, Thach That District , Hanoi, VietnamTel : +84 - 43 - 3688 525Fax : +84 - 43 - 3688 521Email : [email protected] : http://www.noble-j.co.jp/
Selling ItemsProduct name: PotentiometerXV092,12 series Use for: Audio mixer, Audio amplifierMinimum lot: N/AMaterial: N/A
Product name: Push switch (Latching) SF06 series Use for: Auto cruise, Hazard &Fog lamp switch for automobileMinimum lot: N/AMaterial: N/A
Product name: Encoder XRE012 seriesUse for: Digital device Minimum lot: N/AMaterial: N/A
Product name: Custom product for automotive parts, IB-CE seriesUse for: Mirroe angle memory, Headlight leveling switch Minimum lot: N/AMaterial: N/A
Company Profile
Contact Information
NOBLE participates in customers’ product development efforts from the planning stage. Through collaboration between engineers, putting aside the differences in their perspectives, we seek ever higher levels and, under our integrated production system, realize clashing objectives between cost, speed and quality.
Product name: Custom product for home electrical productsUse for: Digital still camera, Camcorder and mobile phoneMinimum lot: N/AMaterial: N/A
Product name: Cement product for circuit protection, RGC, RMH RNF and RKF series etcUse for: Power supplyMinimum lot: N/AMaterial: N/A
JP 30
42 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
NODA VIETNAM CO., LTD
Establishment year : 2011Number of Employees : 60Factory Address : Unit27,Piot N-1,Thang Long Industrial Park, Dong Anh district, Hanoi, VietnamFactory space (m2) : 1000Charter Capital (USD) : 100,000Turnover in 2014 (USD) : 1,250,000Main Technology : Thomson-die, Chrom-dieMain Customers : N/AQuality Certificates : N/AOther information : N/A
Person in charge : Mr. TOSHIAKI KOJIMA/ MR. NGUYEN VAN HOIPosition : Managing Director / Sales Staff Address (Office) : Unit27,Piot N-1,Thang Long Industrial Park, Dong Anh district, Hanoi, VietnamTel : +84 - 4- 3959 0240Fax : +84 - 4 -3959 0238Email : [email protected] : http://kigataya.com
Purchasing ItemsProduct name: plywoodUse for: Thomson-basedMinimum lot: 1 pcMaterial: Basswood
Product name: coatingUse for: non-stickMinimum lot: 1 pcMaterial: fluorine, silicon, chromium
Product name: resin plateUse for: Thomson-basedMinimum lot: 1 pcMaterial: PC,PET,PVC
Product name: silicone sprayUse for: Thomson-dieMinimum lot: 1 pcMaterial: silicone
Company Profile
Contact Information
Product name: metal processing productsUse for: Thomson-dieMinimum lot: 1 pcMaterial: SUS,metal, Aluminum
Product name: grinder grinding wheelUse for: I cut a knifeMinimum lot: 10 pcsMaterial: N/A
JP 31
43VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
O.N TECHNO VIETNAM CO., LTD
Product name: VcuumCapperUse for: N/AMinimum lot: 1 pcMaterial: N/A
We look for the suppliers in a field of Lost-wax, Die casting, Forging, Sheet Metal technology and other machine parts
Establishment year : 2014Number of Employees : 10Factory Address : Thua dat 65, ban do47, Ho town,Thuan Thanh district, Bac Ninh province, VietnamFactory space (m2) : 600Charter Capital (USD) : 100,000Turnover in 2014 (USD) : N/AMain Technology : It is produced the industrialMain Customers : Our Hed Office (JP)Quality Certificates : N/AOther information : We accept all the small-slot orders, single items of milling and lathe machines. The “vacuum camper” we introduce in this exhibiton is a space-saving device, can be easily
Person in charge : Mr.TAKESHI NAKAI / Mr. NGUYEN VAN HOACHPosition : Representative Director / Factory managerAddress (Office) : Thua dat 65, ban do47, Ho town,Thuan Thanh district, Bac Ninh province, VietnamTel : +84 - 241- 3775 326 Fax : +84 - 241- 3775 326Email : [email protected] / [email protected] : http://www.on-techno.jp
Selling Items
Product name: Die casting Use for: N/AMinimum lot: 100 pcsMaterial: Aluminum
Company Profile
Contact Information
Purchasing ItemsProduct name: Lost-waxUse for: N/AMinimum lot: 100 pcsMaterial: Stainless steel
Product name: ForgingUse for: N/AMinimum lot: 100 pcsMaterial: Aluminum
Product name: A great variety of machine parts Use for: N/AMinimum lot: 1 pcMaterial: N/A
Product name: Sheet MetalUse for: N/AMinimum lot: 100 pcsMaterial: Stainless steel
JP 32
operated, no need to have special knowledges on machining techniques. Feel free to take a look on our “vacuum camper” and if you have interest, you can try operating it. We are expecting to seeing you.
44 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
OGINO SEISAKUSyO CO., LTD
Product name: mechanical hand A’ssy Use for: industrial robotMinimum lot: 1 pcMaterial: steel etc…
We look for the suppliers which have the lathing technology for steel. Our product is used for automobile and industrial machinery for the states. We’re looking for the company which can cooperate technologically. In particular ,the company which has CNC and M/C is desirable
Establishment year : 1946Number of Employees : 83 (japan) 100 (global)Factory Address : 418, Miyamuro, Hirobaba, Shinto-Mura, Kitagunma-Gun,Gunma Pref.,370-3504, JapanFactory space (m2) : 4,700Charter Capital (JPy) : 30,000,000 Turnover in 2012 (JPy) : 1,000,000,000 Main Technology : cutting steelsMain Customers : N/AQuality Certificates : ISO9001:2008Other information : N/A
Person in charge : Mr. OGINO OSAMUPosition : PresidentAddress (Office) : 418, Miyamuro, Hirobaba, Shinto-Mura, Kitagunma-Gun,Gunma Pref.,370-3504,JapanTel : +81 - 279 54 4011Fax : +81- 279 54 1681Email : [email protected] : http://www.ogisei.com
Selling Items
Product name: auto inspection machineUse for: automobile parts etc.. Minimum lot: 1 pcMaterial: N/A
Company Profile
Contact Information
Purchasing ItemsProduct name: virtual machiningcenter sample Use for: industrial equipmentMinimum lot: 1 pcMaterial: aluminum
Product name: plastic sample Use for: automobile Minimum lot: 1,000 pcsMaterial: plastic
Product name: cut turning sampleUse for: camflower Minimum lot: 50 pcsMaterial: steel
Product name: MIM sample Use for: mobile phoneMinimum lot: 500 pcsMaterial: MIM
Product name: virtual machiningcenter sample Use for: industrial equipmentMinimum lot: 1 pcMaterial: aluminum
JP 34
45VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
OHASHI TEKKO VIETNAM, INC
Product name: Cation ED CoatingUse for: Automobile PartsMinimum lot: 1,000 pcsMaterial: N/A
We look for the suppliers which manufacture Pad, Pin and Rod material (Round bar).Also, we provide Cation ED Coating and Round Bar Press.
Establishment year : 2013 Number of Employees : 16Factory Address : Binh Xuyen IZ, Huong Canh Commune, Binh Xuyen District, Vinh Phuc, VietnamFactory space (m2) : 2,680Charter Capital (USD) : 3,580,000Turnover in 2014 (USD) : N/AMain Technology : Automobile Parts Manufacturing, Round Bar Press, Cation ED CoatingMain Customers : Denso Manufacturing VietnamQuality Certificates : N/AOther information : Our headquarters, Ohashi Iron Works in Japan has business with Toyota Mortor Corporation as Tier-1 supplier nearly 100 years.
Person in charge : Mr. TAKAAKI KOJIMAPosition : General DirectorAddress (Office) : Binh Xuyen IZ, Huong Canh Commune, Binh Xuyen District, Vinh Phuc, VietnamTel : +84 -211-3888 084Fax : +84 -211-3888 085Email : [email protected] : http://www.ohashi-tekko.vn
Selling Items
Product name: Rod (Round Bar)Use for: Accelerator PedalMinimum lot: 2/tonMaterial: Steel
Company Profile
Contact Information
Purchasing ItemsProduct name: PadUse for: Accelerator PedalMinimum lot: 10,000 pcsMaterial: Polypropylene,Aluminium
Product name: PinUse for: Accelerator PedalMinimum lot: 10,000 pcsMaterial: Stainless Steel
Product name: Cation ED Coating(Bracket)Use for: Automobile PartsMinimum lot: 1,000 pcsMaterial: N/A
JP 35
46 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
PALOMA VIET NAM CO.,LTD
Product name: Gas cooker Use for: N/AMinimum lot: 4000 pcsMaterial: Iron, Steel, Brass
We are looking for the suppliers which manufacturing parts for gas cooker (pipe for gas cooker, burners stove, panel seal, O Ring….). Our purchasing Items are Gas cooker
Establishment year : July in 2014Number of Employees : 232Factory Address : No. 114-116, No.6 Road, VSIP Hai Phong, Township Industrial and Service Park,Dinh Vu – Cai Hai Economic Zone, Hai Phong city, VietnamFactory space (m2) : 15,283Charter Capital (USD) : 12,000,000Turnover in 2014 (USD) : Have not yetMain Technology : Gas cooker technologyMain Customers : Phu Thai Group & Mekong GroupQuality Certificates : TCCS 01:2015/PLMOther information : Paloma Company is one of the most leading company in the world about manufacturing equipments utilize Gas and Gas Stove, Headquartered in Japan. Paloma
Person in charge : Mr. FURUMURA KENICHI Position : General Director Address (Office) : No. 114-116, No.6 Road, VSIP Hai Phong, Township Industrial and Service Park,Dinh Vu – Cai Hai Economic Zone, Hai Phong city, VietnamTel : +84 - 0312 299 010Fax : +84 - 0312 299 011Email : [email protected] : http://www.palomaglobal.com
Selling Items
Product name: Burners stoveUse for: Gas cookerMinimum lot: 2,500 pcsMaterial: Brass
Company Profile
Contact Information
Purchasing ItemsProduct name: Pipe Use for: Gas cookerMinimum lot: 5,000 pcsMaterial: Steel pipe, Zn plating,
Product name: Panel sealUse for: Gas cookerMinimum lot: 2,000 pcsMaterial: Plastic, nilon
Product name: O RingUse for: Gas cookerMinimum lot: 10,000 pcsMaterial: Rubber
Vietnam Company is manufacturing many gas Stoves and is being sell to Vietnam market. Gas Stove of Paloma is integrated burn tip which saving fuel and system will off by itself when have wind or water flow up. It is safe to utilize. We hope to keep always warmly flame in kitchens of Vietnam family.
JP 36
47VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
PANASONIC VIETNAM CO., LTD
Establishment year : 1918Number of Employees : 254,084 (Consolidated)Factory Address : 1006, Kadoma, Kadoma-shi, Osaka 571-8501, Japan (Head office)Factory space (m2) : N/ACharter Capital (USD) : 2,464,000,000 (303 billion yen, 1USD = 123YEN)Turnover in 2014 (USD) : 63,008,000,000 (7,750 billion yen, 1USD=123YEN)Main Technology : Comprehensive electronics manufacturer: production, sales, and services for products ranging from electronic component to home electronic equipment, electrical appliances, factory automation (FA) equipment, information/communications equipment, and housing equipment.Main Customers : N/AQuality Certificates : ISO9001, ISO14001Other information : N/A
Person in charge : Ms. Hoang Thu Thuy Position : Procurement Assistant Manager of Procurement Group, Panasonic Vietnam Co., LTD Address (Office) : Plot J1-J2 Thang Long Industrial park, Dong Anh District, Hanoi, VietnamTel : +84 - 4 - 3955 0111/12/13 Ext: 1217 Fax : +84 - 4 - 3955 0144Email : [email protected] Website : http://panasonic.net
Purchasing ItemsProduct name: PanelUse for: Door cameraMinimum lot: 5,000 pcsMaterial: plastic, painting process
Product name: FrameUse for: SpeakerMinimum lot: 5,000 pcsMaterial: AS-4133L, SUS301, Ni, Au
Product name: Tube drain BL267Use for: RefrigeratorMinimum lot: 40,000 pcsMaterial: HDPE 5502
Product name: GasketUse for: RefrigeratorMinimum lot: 3,000 pcsMaterial: rubber, magnet, PVC
Company Profile
Contact Information
Our purchasing Items are Electronic/Electric and spare parts for System Network, Home appliance, Industrial devices for Panasonic products
Product name: WindowUse for: Washing machineMinimum lot: 500 pcsMaterial: Temperred Glass
Product name: Key rubberUse for: TelephoneMinimum lot: 3,000 pcsMaterial: silicon injection, coating, printing
JP 33
48 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
PREC VN CO., LTD
Establishment year : 2008Number of Employees : 65Factory Address : Binh Xuyen Industrial Park, Vinh Phuc Province, VietnamFactory space (m2) : 10,000Charter Capital (USD) : 800,000Turnover in 2014 (USD) : 2,000,000Main Technology : Precision machining parts and Heat treatmentMain Customers : Japan, Vietnam, China, Taiwan Quality Certificates : N/AOther information : N/A
Person in charge : Mr. HIDEO MURAIPosition : DirectorAddress (Office) : Binh Xuyen Industrial Park, Vinh Phuc Province, Vietnam Tel : +84 - 211-3593 939Fax : +84 - 211-3593 838Email : [email protected] : http://www.v-prec.co.jp
Company Profile
Contact Information
Product name: POM (Black/White)Use for: N/AMinimum lot: 100 pcsMaterial: N/A
Product name: BrassUse for: N/AMinimum lot: 100 kgMaterial: N/A
Product name: Connecror Parts 1Use for: CommunicationMinimum lot: 1,000 pcsMaterial: Brass
Product name: AluminumUse for: N/AMinimum lot: 100 kgMaterial: N/A
Product name: Connector PinUse for: CommunicationMinimum lot: 10,000 pcsMaterial: Brass
Product name: Connecror Parts 2Use for: CommunicationMinimum lot: 1,000 pcsMaterial: Brass
Purchasing Items/Selling Items
JP 37
49VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
PRINTEC OHTOMI CO., LTD
Establishment year : 2013Number of Employees : 70Factory Address : No7, Street 3A, VSIP Bac Ninh, Tu Son Town, Bac Ninh Province, VietnamFactory space (m2) : 2,000Charter Capital (USD) : 1,000,000Turnover in 2014 (USD) : N/AMain Technology : Printing for multi color labelMain Customers : Auto Mobile Manufacture, Bottle molderQuality Certificates : N/AOther information : We are the specialist of printing multi color label, seal.Our products are general labels for packaging, In Mold Label for plastic lubricant bottle, etc.
Person in charge : Mr. AKIYAMA TUSYOSHIPosition : DirectorAddress (Office) : No7, Street 3A, VSIP Bac Ninh, Tu Son Town, Bac Ninh Province, VietnamTel : +84 - 241 - 376 5057Fax : +84 - 241- 376 5059Email : [email protected] : http://www.printec-ohtomi.com
Selling ItemsProduct name: Multi color labelUse for: Packaging etcMinimum lot: 10,000 pcsMaterial: Paper, Film, PET, PE, PVC, synthetic paper
Product name: Die cut knifeUse for: Die cut for labelsMinimum lot: N/AMaterial: PVC plate, Thomson blade
Product name: Washing brushUse for: Plate makingMinimum lot: N/AMaterial: N/A
Product name: In Mold LabelUse for: Plastic bottleMinimum lot: 100,000 pcsMaterial: yUPO
Product name: Anilox RollUse for: Flexso printing machine part Minimum lot: N/AMaterial: Ceramic, aluminum
Product name: Carton boxUse for: PackingMinimum lot: 200 pcsMaterial: Carton box
Company Profile
Contact Information
We look for the suppliers in a field of printing, packaging material and equipment.Die-cut knife, adhesive material, Ink, rubber roller, washing brush, washing cloth or paper, w-tape, carton box, PVC plate, anti-static brush, static eliminator, etc.
Purchasing Items
JP 38
50 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
RHyTHM PRECISION VIETNAM CO., LTD
Establishment year : 2006Number of Employees : 595Factory Address : Lot 42+87A, Noi Bai Industrial Zone, HanoiFactory space (m2) : 9,260m2 + 7,325m2Charter Capital (USD) : 20,000,000Turnover in 2014 (USD) : 24,600,000Main Technology : Plastic Injection MoldingMain Customers : Canon, Itsuwa, Kyocera, Yamaha, MinebeaQuality Certificates : ISO9001:2008Other information : N/A
Person in charge : Mr. PHAN QUANG CHIENPosition : Vice Factory ManagerAddress (Office) : Lot 42+87A, Noi Bai Industrial Zone, Soc Son, HanoiTel : +84 - 4 - 3582 1661 Fax : +84 - 4 - 3582 1662Email : [email protected] : http://rhythm.co.jp
Selling Items
Product name: Precision plastic partsUse for: variousMinimum lot: 1,000 pcsMaterial: Plastic
Product name: assemly unitsUse for: variousMinimum lot: 1,000 pcsMaterial: plastic, metal, PBC etc…
Product name: Battery, Magnet, Electric Wire, Packing Materials…Use for: ClockMinimum lot: 1,000 pcsMaterial: various
Product name: Injection moldsUse for: injection molding productionMinimum lot: 1 pcMaterial: metal
Product name: GlassUse for: ClockMinimum lot: 1,000 pcsMaterial: various
Company Profile
Contact Information
Precision plastic injection molding Parts, Molds and Assembly
Purchasing Items
Product name: Printed circuit boardUse for: AutomobileMinimum lot: 500 pcsMaterial: PCB
JP 39
51VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
RICOH IMAGING PRODUCTS (Vietnam) CO., LTD
Establishment year : 1995Number of Employees : 1,000Factory Address : Plot A7, Sai Dong B Industrial Zone, Long Bien District, Ha NoiFactory space (m2) : 35,000Charter Capital (USD) : 11,000,000 Turnover in 2014 (USD) : 37,721,000 Main Technology : Processing Optical Lenses / Metal Parts for DSLR Camera & Lenses; Assembly of DSLR Camera Body, Interchangeable Lenses and CCTV Lens UnitMain Customers : Japan, EU, USA Quality Certificates : ISO 9001Other information : N/A
Person in charge : WATANABE HiroshiPosition : Deputy General DirectorAddress (Office) : Plot A7, Sai Dong B Industrial Zone, Long Bien District, Ha NoiTel : +84-4-3875-0418Fax : +84-4-3875-0421Email : [email protected] : N/A
Product name: Big Processed Metal PartsUse for: Interchangeable LensesMinimum lot: 500-1,000 pcsMaterial: Aluminum
Product name: Printed Circuit BoardUse for: DSLR Camera bodyMinimum lot: 500-2,000 pcsMaterial: Electronic
Product name: Small Processed Metal PartsUse for: Interchangeable LensesMinimum lot: 500-1,000 pcsMaterial: Aluminum
Product name: Pressed Metal PartsUse for: DSLR Camera BodyMinimum lot: 500-2,000 pcsMaterial: Steel
Company Profile
Contact Information
We are looking for reliable vendors for Processed Metal, Printed Circuit Board, Pressed Parts and more…
Purchasing Items
JP 40
52 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
SAKURAI VIETNAM CO., LTD
Establishment year : 2002/OCTNumber of Employees : 100Factory Address : Plot D2 and D3A Thang Long Industrial Park, Dong Anh district, hanoi, vietnamFactory space (m2) : 17,560Charter Capital (USD) : 5,000,000 Turnover in 2014 (USD) : 3,600,000Main Technology : Machining Main Customers : HONDA VN, TIEV, TSUKUBA VN, MIKASA, SUMITOMONACCO VNQuality Certificates : ISO9001: 2008Other information : To complete processing from material procurement
Person in charge : Mr. NOBORU MURAGUCHIPosition : General DirectorAddress (Office) : Plot D2 and D3A Thang Long Industrial Park, Dong Anh district, hanoi, vietnamTel : +84 - 4-38812 245 Fax : +84 - 4-38812 247Email : [email protected] : http://www.sakurai-net.co.jp
Selling Items
Product name: Bearing holderUse for: GeneratorMinimum lot: 80 pcsMaterial: cast iron
Product name: Bearing holderUse for: GeneratorMinimum lot: 80 pcsMaterial: cast iron
Product name: JigUse for: MachiningMinimum lot: N/AMaterial: cast iron, Steel
Product name: mold partsUse for: mold patternMinimum lot: N/AMaterial: Steel
Product name: Folklift PartsUse for: TransportMinimum lot: N/AMaterial: cast iron, Al
Company Profile
Contact Information
Product name: Car,Mc PartsUse for: TransportMinimum lot: N/AMaterial: cast iron, Al
JP 41
53VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
SHIOGAI SEIKI VIETNAM CO., LTD
Establishment year : 2004Number of Employees : 242Factory Address : 224/4, Road 24-2, Amata IP, Long Binh Ward, Bien Hoa District, Dong Nai province, VietnamFactory space (m2) : 4,677Charter Capital (USD) : 3,000,000 Turnover in 2014 (USD) : 4,700,000Main Technology : Processing machinery parts,Processing Jig.Design for Factory equipment Machine,Automation machines & Jigs,and AssemblyMain Customers : Canon Vietnam; Maruei Vietnam; etc…..Quality Certificates : ISO9001: 2008Other information : Surface finishing (Nikel, Alumite, Uni-Chromate, Teflon,…), Heat Treatment (General heat treatment, Vacuum quenching, Carburizing, Induction Hardening, Nitriding), Maintenance of manufacturing machines
Person in charge : Mr. NAGAI SEIICHIPosition : ManagerAddress (Office) : 224/4, Road 24-2, Amata IP, Long Binh Ward, Bien Hoa District, Dong Nai province, VietnamTel : +84 - 61 - 3936450~453Fax : +84 - 61 - 3936454Email : [email protected] : http:// Shiogaiseikivietnam.com
Selling Items
Product name: ShaftUse for: JigMinimum lot: 1~10 PcsMaterial: SUS304
Product name: PinUse for: JigMinimum lot: 1~10 PcsMaterial: C3604
Product name: Set colourUse for: CameraMinimum lot: 1~10 PcsMaterial: A2017
Product name: Slide BarUse for: Automatic MachineMinimum lot: 1~10 PcsMaterial: S50C
Product name: HousingUse for: Automatic MachineMinimum lot: 1~10 PcsMaterial: MC nylon
Company Profile
Contact Information
Product name: BaseUse for: Automatic MachineMinimum lot: 1~10 PcsMaterial: A5052
We can provide Design & Processing & Assembly many kind of machines and automated machines
JP 42
54 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
SHIRAKAWA SEISAKUSHO, LTD
Product name: Air dryer Use for: instrument air systemMinimum lot: 01 setMaterial: Steel
We look for the suppliers which sell valves or desiccant for air / gas dryer.We look for distributors in field of air dryer.
Establishment year : August 9th, 1957Number of Employees : Nearly 100 personsFactory Address : 2-21-19 Nakacho, Toda, Saitama 335-0012Factory space (m2) : 1,215.37Charter Capital (USD) : 600,000Turnover in 2012 (USD) : 1,500,000 Main Technology : Air/Gas Dryer Manufacturing Main Customers : Semiconductor Plants, Power Plants…Quality Certificates : ISO 9001, JIS Q 9001Other information : SHIRAKAWA SEISAKUSHO is the leading Japanese company which has over 60 years of experience in dehumidifying equipment, with the record sale of more than 10,000 units in over 40 countries.
Person in charge : Mr. TAKAAKI SEKI Position : ChiefAddress (Office) : 2-21-19 Nakacho, Toda, Saitama 335-0012 Tel : 048-432-0901Fax : 048-432-0474Email : [email protected] : http://www.dryer.co.jp
Selling Items
Product name: Solenoid ValvesUse for: Air dryerMinimum lot: 10 pcsMaterial: Plastic cover
Company Profile
Contact Information
Purchasing ItemsProduct name: DesiccantUse for: Air dryerMinimum lot: N/AMaterial: Alumina
Product name: Check ValvesUse for: Air dryerMinimum lot: 10 pcsMaterial: Bronze Alloy
JP 43
55VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
SISIKU ADDKREIS CORPORATION
Product name: CastorsUse for: Industrial hand trucks, etc.Minimum lot: TBNMaterial: Steel bracket and steel core with rubber and polyurethane rubber tread, etc.
We look for the suppliers who manufacture the parts and components for our castors & wheels and hand trucks, and also the buyers for our finished products.
Establishment year : 1945Number of Employees : 55Factory Address : Ru-17, Sakado, Tsubata-machi, Kahoku-gun, Ishikawa-pref. 929-0417 JAPANFactory space (m2) : 4,099 Charter Capital (USD) : 252,320Turnover in 2014 (USD) : 7,346,000Main Technology : Manufacturing compact heavy-duty castors, shock absorbing castors, and many other user-friendly products.Main Customers : Automobile industryQuality Certificates : ISO9001: 2008Other information : We’re looking for a possible business partner who duly understands the superiority and the merits of made-in-Japan products, and also a potential buyer who desires to work as the distributor for our products in the local market for material handling equipment.
Person in charge : Mr. M.EIDAPosition : Sub-leaderAddress (Office) : MARUSHO BLDG. 1-16-15, Nagadohe, Kanazawa 920-0867 JAPANTel : +81-76-221 0449Fax : +81-76-223 0449Email : [email protected] : http://www.sisiku.com
Selling Items
Product name: Wheels Use for: CastorsMinimum lot: 4,000 pcsMaterial: Steel core with rubber and polyurethane rubber tread, etc.
Company Profile
Contact Information
Purchasing ItemsProduct name: Ball bearingsUse for: Wheels for castorsMinimum lot: 30,000 pcsMaterial: Steel and Stainless steel
Product name: Bracket (yoke)Use for: Fixed castorsMinimum lot: 4,000 pcsMaterial: Steel
Product name: Industrial hand trucks Use for: Material handlingMinimum lot: TBNMaterial: Steel and plasticparts.
Product name: Machined partsUse for: Industrial hand trucksMinimum lot: 1,000 pcsMaterial: Steel and plastic
JP 44
56 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
TAICO VIETNAM CO., LTD
Establishment year : 2012Number of Employees : 5Factory Address : N/AFactory space (m2) : N/ACharter Capital (USD) : 200,000Turnover in 2014 (USD) : N/AMain Technology : TradingMain Customers : Hoshizaki electric, Taico Japan, Toho Precision, etcQuality Certificates : N/AOther information : We are trading company in Hanoi. We cooperate with Vietnam companies to export goods like press, cutting, plastic parts, rubber parts, PU molding, etc and assembly. We would like to cooperate with the vigorous Vietnam company
Person in charge : Mr. YUTAKA INOUEPosition : General DirectorAddress (Office) : 29 Vu Pham Ham street, Yen Hoa ward, Cau Giay district, Ha Noi, VietnamTel : +84 - 4 - 3783 5618Fax : +84 - 4 - 3783 5619Email : [email protected] : http://www.taico.co.jp
Company Profile
Contact Information
We look for the supplier who want to export the goods to Japan
Product name: BasketUse for: Kitchen InstrumentMinimum lot: 1,000 pcsMaterial: SUS304
Product name: Press partsUse for: Industrial machineMinimum lot: 600 pcsMaterial: SUS304
Product name: Urethane casting productUse for: Health-care equipmentMinimum lot: 3,000 pcsMaterial: Polyurethane
Product name: Wire mesh ( Actual size: 2700x1550)Use for: Agriculture and forestry ‘s materialMinimum lot: 3,000 pcsMaterial: Steel+ Hot dip galvanized
Product name: Pipe processed partUse for: Industrial machineMinimum lot: 600 pcsMaterial: SUS304
Product name: TankUse for: For liquid chemical storageMinimum lot: 3,000 pcsMaterial: PP
Purchasing Items/Selling Items
JP 45
57VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
TAMRON OPTICAL(VIETNAM) CO., LTD
Establishment year : 04 May 2012Number of Employees : 1,077Factory Address : Plot No.69B &70A, Noi Bai Industrial Zone Mai Dinh Commune, Soc Son District, Ha Noi, Viet Nam.Factory space (m2) : 13,400 Charter Capital (USD) : 14,000,000 Turnover in 2014 (USD) : 33,220,783Main Technology : Optical LensesMain Customers : Original brand ProductionQuality Certificates : ISO 9001:2008, ISO 14001: 2004Other information : N/A
Person in charge : Mr. DOAN ( Vietnam/ English); Mr. SUZUKI (Japan)Position : A.ManagerAddress (Office) : Plot No.69B &70A, Noi Bai Industrial Zone Mai Dinh Commune, Soc Son District, Ha Noi, Viet Nam.Tel : +84 - 4 - 3762 1759Fax : +84 - 4 - 3762 1758Email : [email protected] / [email protected] : http:// www.tamron.co.jp
Product name: Cam barrelUse for: Assembly LensMinimum lot: 30,000 pcsMaterial: Steel
Product name: LensUse for: CameraMinimum lot: 30,000 pcs Material: Glass
Product name: Adjustment washerUse for: Control lensMinimum lot: 60,000 pcsMaterial: Copper
Product name: FPCUse for: N/AMinimum lot: 350,000 pcsMaterial: FPC
Company Profile
Contact Information
We look for the suppliers which manufacture and sell products relating to optical lenses.
Product name: Main board assyUse for: Control lens’s movingMinimum lot: 30,000 pcsMaterial: N/A
Product name: GearUse for: Assembly LensMinimum lot: 80,000 pcsMaterial: Steel
Purchasing Items/Selling Items
JP 46
58 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
TECHNOTAIyO VIETNAM CO., LTD
Establishment year : 2015Number of Employees : 4Factory Address : Hanoi and vicinityFactory space (m2) : 3,000Charter Capital (USD) : 50,000Turnover in 2014 (USD) : N/AMain Technology : Precision machining, sheet metal press, trading companyMain Customers : Via TECHNOTAIYO, each leading manufacturer of JapanQuality Certificates : N/AOther information : Our company was established in July 2015. We formerly were a representative office in September 2013 with 100% investment of TECHNO TAIYO CO., LTD from Sakai city,
Person in charge : Mr.HIROKI ONO (JP) / Mr.LE VAN LOI (VN)Position : General Director / StaffAddress (Office) : Room 601, 6FL , No2, Hoang Quoc Viet Street , Cau Giay district ,Hanoi, Vietnam Tel : +84 - 9 - 4400 2169 (JP) / + 84 - 9 - 8571 3429 (VN)Fax : N/AEmail : [email protected] (JP) / [email protected] (VN)Website : http://www.techno-t.co.jp/
Company Profile
Contact Information
We provide products such as machining parts, sheet metal stamping parts, molding parts, casting parts, forging parts, etc… which can satisfy many customers.
Product name: machining partsUse for: optical equipmentMinimum lot: 200 pcsMaterial: A5052 (Aluminum)
Product name: machining partsUse for: measuring equipmentMinimum lot: 300 pcsMaterial: C3604 (Brass)
Product name: machining partsUse for: various purposesMinimum lot: 50 ~ 500 pcsMaterial: Steel, Aluminum, stainless steel
Product name: machining partsUse for: industrial machineryMinimum lot: 500 pcsMaterial: SS400 (Steel)
Product name: machining partsUse for: N/AMinimum lot: 1,000 pcsMaterial: S45C (Steel)
Product name: sheet metal stamping partsUse for: various purposesMinimum lot: 100 ~20,000 pcsMaterial: SPCC, SGCC, SPHC, SECC, A1050, A5052, SUS201, SUS304
Purchasing Items
Japan. In order to supply machining parts, sheet metal stamping parts, molding parts, casting parts, forging parts, etc… of industrial machinery, medical equipment, optical equipment, measuring equipment, hydraulic equipment, we have established an office in Hanoi and had our private processing machines installed in each alliance factory which is directed under the technical guidance and management of Japanese engineers. Therefore, we are now able to provide products which can satisfy many customers.
JP 48
59VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
TOHO VIETNAM CO., LTD
Establishment year : 2002Number of Employees : 180Factory Address : Plot B1, Thang Long IP, Dong Anh District, Hanoi, VietnamFactory space (m2) : 5,985Charter Capital (USD) : 15,000,000Turnover in 2014 (USD) : 7,723,537Main Technology : Plastic injection Mold, Die-cast mold.Main Customers : Honda, Yamaha, Panasonic, Brother, CanonQuality Certificates : N/AOther information : N/A
Person in charge : Mr. MITSUO ASAHARAPosition : Executive Vice PresidentAddress (Office) : Plot B1, Thang Long IP, Dong Anh District, Hanoi, VietnamTel : + 84 - 4-3881 1111Fax : + 84 - 4-3881 1115Email : [email protected] : http://www.toho.ne.jp
Selling ItemsProduct name: Die cast mold for motor bike wheel.Use for: Motor bike.Minimum lot: 1 setMaterial: DHEX 31, DAC Magic.
Product name: Plastic injection mold for motor bike partUse for: Motor bike.Minimum lot: 1 setMaterial: HPM7, P20
Product name: Die cast mold for motor bike engine cover.Use for: Motor bike.Minimum lot: 1 setMaterial: DHEX 31, DAC Magic.
Product name: Plastics injection mold for motor bike.Use for: Motor bike.Minimum lot: 1 setMaterial: HPM7, P20
Company Profile
Contact Information
We look for die-casting & plastic parts for motor bike / automobile
Product name: Plastic injection mold for printer part.Use for: PrinterMinimum lot: 1 setMaterial: NAK80, SKD61
Product name: Plastic injection mold for printer partUse for: PrinterMinimum lot: 1 setMaterial: NAK80, SKD61
JP 47
60 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
TOyODA GIKEN CO., LTD
Establishment year : 1959 Number of Employees : 100 Factory Address : 2155 shiroishi , fujioka city, gunma, japanFactory space (m2) : N/ACharter Capital (USD) : 200,000Turnover in 2014 (USD) : 20,000,000Main Technology : Metal stamping , plating , mold makingMain Customers : Automobile parts manufacturersQuality Certificates : ISO 9001:2008 Other information :
Person in charge : Mr. SHINYA TOYODAPosition : ManagerAddress (Office) : 2155 shiroishi , fujioka city, gunma, japan Tel : +81 - 274 40 7234Fax : +81 - 274 40 7118Email : [email protected] : http://www.toyoda.ne.jp/
Company Profile
Contact Information
We need for the suppliers in a field of heat treatment technology and metal mold technology
Product name: single moldUse for: N/AMinimum lot: N/AMaterial: N/A
Product name: Progressive dieUse for: N/AMinimum lot: N/AMaterial: N/A
Product name: Coating toolUse for: N/AMinimum lot: N/AMaterial: N/A
Product name: Mold componentUse for: N/AMinimum lot: N/AMaterial: N/A
Purchasing Items/Selling Items
JP 49
61VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
TOyOTA MOTOR VIETNAM CO., LTD
Establishment year : 1995Number of Employees : 1,850 Factory Address : Phuc Thang ward, Phuc Yen Town, Vinh Phuc Province, Viet NamFactory space (m2) : 210,100 Charter Capital (USD) : 89,600,000 Turnover in 2014 (USD) : N/AMain Technology : Car manufacturingMain Customers : N/AQuality Certificates : ISO 140001Other information : N/A
Person in charge : Mr. TAIGA YAMAGUCHIPosition : TMV ADM& Finance Group DirectorAddress (Office) : Phuc Thang ward, Phuc Yen Town, Vinh Phuc Province, Viet NamTel : +84 - 211 - 3868 100 Ext: 2225Fax : +84 - 211- 3868 188Email : [email protected] : http://www.toyotavn.com.vn
Purchasing ItemsProduct name: InteriorUse for: AutomobileMinimum lot: N/AMaterial: Resin Felt, Polyester
Product name: FoamUse for: AutomobileMinimum lot: N/AMaterial: EPP Foam
Product name: ResinUse for: AutomobileMinimum lot: N/AMaterial: PP/PE
Product name: RubberUse for: AutomobileMinimum lot: N/AMaterial: TSB 5501G-1E
Company Profile
Contact Information
We are looking for potential candidate supplier in Viet Nam to supply Parts & Material for our production Car model in Viet Nam and Export Part to other countries.
Product name: StampingUse for: AutomobileMinimum lot: N/AMaterial: SCGA 270D 45
Product name: StampingUse for: AutomobileMinimum lot: N/AMaterial: SCGA 270C 45
JP 52
62 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
TSUKUBA DIECASTING VIETNAM CO., LTD
Establishment year : 18 December 1995 Number of Employees : 800 Factory Address : Lot A6 Cong Nghiep 4 Road,Sai Dong B Industrial zone, Long Bien District, Hanoi, Vietnam Factory space (m2) : 24,145Charter Capital (USD) : 6,500,000Turnover in 2014 (USD) : 25,000,000 Main Technology : Diecasting and machining and painting Main Customers : YAMAHA, HONDA, TOYOTA, SUMITOMO, PANASONIC Quality Certificates : ISO9001 / ISO14001Other information : Manufacturing, processing, machining and painting various kind of Aluminum &Magnesium products .Our Company is capable of handing the demand of your customers
Person in charge : Mr. SUSUMU OSAWA Position : General director Address (Office) : Lot A6 Cong Nghiep 4 Road,Sai Dong B Industrial zone, Long Bien District, Hanoi, Vietnam Tel : +84 - 43 - 875 9759 Fax : +84 - 43 - 875-9889Email : [email protected] Website : http:/www.tsukuba-dc.co.jp/
Selling Items
Product name: DiecastingUse for: MotorbicyclesMinimum lot: N/AMaterial: ADC12
Product name: DiecastingUse for: Motor for the industry Minimum lot: N/AMaterial: ADC12
Product name: SandpaperUse for: Polishing of the productMinimum lot: 50,000 pcsMaterial: N/A
Product name: DiecastingUse for: MotorbicyclesMinimum lot: N/AMaterial: ADC12
Product name: Machining tool Use for: MachiningMinimum lot: 100 pcs Material: N/A
Company Profile
Contact Information
Purchasing Items
Product name: DiecastingUse for: Personal computerMinimum lot: N/AMaterial: AZ91-D
JP 50
63VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
V-HONEST CO., LTD
Establishment year : 2012Number of Employees : 30Factory Address : TS11 Str Tien Son, Hoan Son, Tien Du District, Bac Ninh Province, VietnamFactory space (m2) : 1,400Charter Capital (USD) : 300,000Turnover in 2014 (USD) : 250,000Main Technology : Welding, Cutting work, Drilling, Sheet-metal workingMain Customers : J-HONEST., LTDQuality Certificates : N/AOther information : N/A
Person in charge : Mr. JINICHI SUZUKIPosition : AdvisorAddress (Office) : TS11 Str Tien Son, Hoan Son, Tien Du District, Bac Ninh Province, VietnamTel : + 84 - 241- 373 4730Fax : + 84 - 241- 373 4740Email : [email protected] : N/A
Selling ItemsProduct name: RadiatorUse for: TrainMinimum lot: 1 pcMaterial: Steel
Product name: ChassisUse for: Medical use Minimum lot: 1 pcMaterial: Steel
Product name: FilterUse for: Train Minimum lot: 1 pcMaterial: Steel
Product name: Box Use for: Electrical wiringMinimum lot: 1 pcMaterial: Steel
Company Profile
Contact Information
We are a maker specializing in metalwork.Our purchasing Items is SS400 square steel bar.
Product name: Box Use for: Electrical wiringMinimum lot: 1 pcMaterial: Steel
Product name: PlateUse for: Elevator Minimum lot: 1 pcMaterial: Steel
JP 51
64 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
y.H SEIKO VIETNAM, JSC
Establishment year : 2011Number of Employees : 28Factory Address : Unit 6, Plot N-1, Thang Long Apartment Factory, Thang Long I.P, Dong Anh district, Hanoi, VietnamFactory space (m2) : 500Charter Capital (USD) : 890,000Turnover in 2014 (USD) : 666,600Main Technology : Design, manufacture and maintenance precision mold; Design, manufacture anh maintenance precision parts of mold; Plastics injection molding. Main Customers : Daiwa Plastics Thang Long, Hamaden Viet Nam, Viet Nam Mie….Quality Certificates : N/AOther information : Y.H Seiko Vietnam JSC with high-tech equipment such as CNC milling machine centers, CAD, CAM 3D, will bring the products with the highest precision.
Person in charge : Mr. KAZUO YOSHINAKAPosition : General DirectorAddress (Office) : Unit 6, Plot N-1, Thang Long Apartment Factory, Thang Long I.P, Dong Anh district, Hanoi, VietnamTel : +84-4-3959 0250Fax : +84-4-3959 0251Email : [email protected] : http://www.yh-seiko.com.vn
Company Profile
Contact Information
YH Seiko Vietnam JSC focuses on developing technology to produce high precision equipmentsfrom CAD 3D design software to state- of-the-art machines.
Product name: Mold for PlasticsUse for: Car’s partMinimum lot: 2 pcsMaterial: Steel
Product name: Mold for PlasticsUse for: Electrical Product Minimum lot: 1 pcMaterial: Steel
Product name: Molding partUse for: Switch coverMinimum lot: 4 pcsMaterial: Plastics
Product name: Mold for Plastics Use for: Car’s partMinimum lot: 2 pcsMaterial: Steel
Product name: Molding partUse for: SwitchMinimum lot: 2 pcs (1set)Material: Plastics
Product name: Molding partUse for: Lever SwitchMinimum lot: 2 pcsMaterial: Plastics
Purchasing Items/Selling Items
JP 53
65VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
yANAGAWA SEIKO VIETNAM CO., LTD
Product name: CNC Automatic Lathe Cutting partsUse for: automotive related products (high pressure pump)Minimum lot: 10,000 pcsMaterial: steel, stainless steel
We look for suppliers who supply steel round bar, stainless steel round bar, non-ferrous round bar, and cutting tools
Establishment year : June 2006Number of Employees : 502Factory Address : Land Plot J-5, Nomura IZ, An Duong district, Hai Phong province, VietnamFactory space (m2) : 14,000Charter Capital (USD) : 1,266,899Turnover in 2012 (USD) : 10,495,796Main Technology : CNC lathe cuttingMain Customers : Hitachi, Fuji Seiko, SanyoQuality Certificates : ISO 9001; TS 16949; ISO 14001; OHSAS 18001Other information : N/A
Person in charge : Mr. TADAYUKI YANAGAWA/Ms. LE THI HUYENPosition : General Director/SalesAddress (Office) : Land Plot J-5, Nomura IZ, An Duong district, Hai Phong province, VietnamTel : +81 - 313 743 346Fax : +81 - 313 743 347Email : [email protected] Website : http://www.yanagawaseiko.co.jp
Selling Items
Product name: cutting toolUse for: lathe machines Minimum lot: 50 pcsMaterial: carbide
Company Profile
Contact Information
Purchasing ItemsProduct name: metal round barsUse for: CNC lathe cutting parts for automobileMinimum lot: 500/KgMaterial: Steel, Stainless steel
Product name: copper round barUse for: CNC lathe cutting parts for automobileMinimum lot: 500/KgMaterial: Copper
Product name: CNC Automatic Lathe Cutting partsUse for: automotive related products (Injector)Minimum lot: 10,000 pcsMaterial: steel, stainless steel
JP 54
Product name: CNC Automatic Lathe Cutting partsUse for: automotive related products (thermostat)Minimum lot: 10,000 pcsMaterial: steel, stainless steel
Product name: CNC Automatic Lathe Cutting partsUse for: automotive related products (ABS)Minimum lot: 10,000 pcsMaterial: steel, stainless steel
66 VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
yASHIMA & CO.,LTD
Establishment year : 28 October 1948Number of Employees : 250Factory Address : N/AFactory space (m2) : N/ACharter Capital (USD) : 1,237,000Turnover in 2014 (USD) : 375,000,000Main Technology : Trading CompanyMain Customers : Vietnam Railways, All Japanese Railway companyQuality Certificates : ISO 9001:2008 (Electronics Sales Division)Other information : Trading Company which deals in railroad car parts, electrical parts, IT equipment and repair, maintenance of railroad cars/ parts for JR companies, urban transpostation companies, private railway companies, railroad car manufacturers nationwide.
Person in charge : Mr. KOTARO ANDOPosition : General ManagerAddress (Office) : R-701, Sannam Bdg., Duy Tan Str., Dich Vong Hau Ward, Cau Giay District, Hanoi, Viet NamTel : +84-4-626-92335/6Fax : +84-4-626-92338Email : [email protected]; [email protected] : http://www.yashima.co.jp/en
Company Profile
Contact Information
We look for the suppliers in a field of Transportation and Electronics technology
Product name: Bus ductUse for: Industrial metrialMinimum lot: 5 pcsMaterial: almiunm etc,...
Selling Items
Product name: Plate workingUse for: Switch box etcMinimum lot: 50 pcsMaterial: ilon etc,
Purchasing ItemsProduct name: Wire meshUse for: Railway carMinimum lot: 100 pcsMaterial: ilon
Product name: Rubber or ilon SheetUse for: Passenger CarMinimum lot: 10 pcsMaterial: Rubber or ilon
Product name: CurtainUse for: Railway carMinimum lot: 10 pcsMaterial: Chemical fiber etc,...
JP 55
67VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANy
yODOGAWA RASENKAN MFG. CO.,LTD
Establishment year : 1964Number of Employees : 40Factory Address : 0-15, Tsukuda4-chome, Nishiyodogawaku, Osaka 555-0001 JapanFactory space (m2) : 7,200Charter Capital (USD) : 150,000Turnover in 2014 (USD) : 12,500,000Main Technology : WeldingMain Customers : NIPPON STEEL & SUMIKIN ENGINEERING CO., LTDQuality Certificates : JISOther information : N/A
Person in charge : Mr. NGUYEN HUY TRUONG Position : ManagerAddress (Office) : B1/001,Nguyen Hue 1 Quang Trung Commune, Thong Nhat District,Dong Nai Province, VietnamTel : +84 - 613-774 797Fax : +84 -613-77 479Email : [email protected] : http://www.flexible.co.jp
Company Profile
Contact Information
We aim at made in Vietnam of the Japanese quality/We need your cooperation
Product name: fittings (sus)Use for: Flexible TubeMinimum lot: 500 pcs/sizeMaterial: SUS, SS
Product name: fittings (sus)Use for: Flexible TubeMinimum lot: 500 pcs/sizeMaterial: SUS, SS
Product name: fittings (sus)Use for: Flexible TubeMinimum lot: 500 pcs/sizeMaterial: SUS, SS
Product name: fittings (sus)Use for: Flexible TubeMinimum lot: 500 pcs/sizeMaterial: SUS, SS
Purchasing Items
Product name: Heat TreatmentUse for: Flexible TubeMinimum lot: N/AMaterial: SUS
Product name: Heat TreatmentUse for: Flexible TubeMinimum lot: N/AMaterial: SUS
JP 56
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
68
VIETNAMESE COMPANy
3H PLASTIC JSC
Establishment year : March, 2010Number of Employees : 50Factory Address : Phuong Trach, Vinh Ngoc Commune , Dong Anh District, Hanoi, VietnamFactory space (m2) : 1,800Charter Capital (USD) : 90,000Turnover in 2014 (USD) : 1,430,000Main Technology : Plastic injection & blowing mouldingMain Customers : Taiwan, Japan, IndianQuality Certificates : ISO9000, ISO14000Other information : N/A
Person in charge : Mr. HOANG VAN HUONGPosition : DirectorAddress (Office) : No 8/118, Cau Giay street, Cau Giay District, Hanoi, VietnamTel : + 84 - 4 - 2217 1778Fax : + 84 - 4 - 6269 0289Email : [email protected]; [email protected] : http://www.3hgo.com.vn
Selling ItemsProduct name: Injection mouldUse for: MotorcycleMinimum lot: 01pcMaterial: NAK80, P60
Product name: Switch lamp CoverUse for: yamaha motorcycleMinimum lot: 50,000 pcsMaterial: PA6,GF30%
Product name: Head lamp switch signalUse for: yamaha motorcycleMinimum lot: 50,000 pcsMaterial: POM
Product name: Head lamp switch signalUse for: yamaha motorcycleMinimum lot: 50,000 pcsMaterial: POM
Product name: Switch lamp CoverUse for: yamaha motorcycleMinimum lot: 50,000 pcsMaterial: PA6,GF30%
Product name: Smart BallUse for: Educational ToysMinimum lot: 50,000 pcsMaterial: ABS
Company Profile
Contact Information
We can provide technical plastic products / We have pad printing in plastic products technology / Our products are all kind of plastic injection moulding/ We are making mould precision and plastic injection and blowing specialist.
VN 01
69VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
ANMI TOOLS CO.,LTD
Establishment year : 2009Number of Employees : 59Factory Address : Lac Dao, Nhu Quynh District, Hung Yen Province, Viet NamFactory space (m2) : 2,000Charter Capital (USD) : 1,500,000Turnover in 2013 (USD) : 4,000,000Turnover in 2014 (USD) : 4,600,000Main Technology : Cutting tools, Jig, MouldMain Customers : Honda, Yamaha,… Quality Certificates : N/AOther information : ANMI is a manufacturer of detail with high, Accuracy, As a system supplier for sales of cutting tools and machine tools accessories, regrinding and rebuilding, Cutting tools.
Person in charge : Mr. NGUYEN HONG PHONGPosition : Country Sales Manager HP: +84 912 11 77 96 Address (Office) : Suite 317 - CT5 Building- PhamHung street, Hanoi capital , VietnamTel : +84-3556 2635Fax : +84-3556 2634Email : [email protected] : http://www.anmitools.com
Selling ItemsProduct name: Special workpieceUse for: MechanicalMinimum lot: 5 pcsMaterial: Steel
Product name: Special workpieceUse for: Detailed machining electricalMinimum lot: 5 pcsMaterial: Al, Cu
Product name: JigUse for: MachiningMinimum lot: 5 pcsMaterial: Steel
Product name: MouldsUse for: Stamping, plastic injectionMinimum lot: 1 pcMaterial: Steel SKD
Product name: Special ToolsUse for: MachiningMinimum lot: 5 pcsMaterial: HSS, Carbide, CBN, PCD
Product name: Grinding toolsUse for: MachiningMinimum lot: 1,000 pcsMaterial: HSS, Carbide, CBN, PCD
Company Profile
Contact Information
VN 02
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
70
VIETNAMESE COMPANy
AUTOMOBILE & MOTORCyCLE PARTS MANUFACTURING HUNG yEN CO.,LTD
Establishment year : 18, April, 2001Number of Employees : 180Factory Address : Tan Quang commune, Van Lam District, Hung Yen Province, VietnamFactory space (m2) : 10,260Charter Capital (USD) : 3,500,000Turnover in 2014 (USD) : 3,600,000Main Technology : Die casting and processing zinc & aluminium alloys productMain Customers : LG, ACE (USA), Panasonic Hung Yen Branch, KORG Viet Nam, DORCO VINA.Quality Certificates : ISO 9001-2008; ISO14001-2004Other information : Please review our production flow chart
Person in charge : Ms. LE THI THANH HANGPosition : DirectorAddress (Office) : Tan Quang commune, Van Lam District, Hung Yen Province, VietnamTel : +84 - 3213 991960Fax : +84 - 3213 791382Email : [email protected]/[email protected] : http://www.amaparts.vn
Selling ItemsProduct name: HUB TUBUse for: Washing machineMinimum lot: 30,000 pcs/monthMaterial: ALDC8
Product name: Cylinder headUse for: Automotive PartMinimum lot: 3,000 pcs/monthMaterial: ADC12
Product name: Back plateUse for: Automotive PartMinimum lot: 2,500 pcs/monthMaterial: ADC12
Product name: Base FuelUse for: Automotive partMinimum lot: 3,500 pcs/monthMaterial: ADC12
Product name: Cutting StandUse for: Family toolingMinimum lot: 5,000 pcsMaterial: N/A
Product name: Heat sinkUse for: audio carMinimum lot: 20,000 pcs/monthMaterial: ADC12
Company Profile
Contact Information
AMA CO., LTD has experience in manufacturing die casting, processing and trading aluminum & zinc alloys products. We have 10 sets of die cast machines and many kinds of processing machines.
VN 03
71VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
BAC VIET TECHNOLOGy JSC
Establishment year : 2008Number of Employees : 190Factory Address : Km7, highway 18, Que Vo IP, Bac Ninh Province, VietnamFactory space (m2) : 32,183Charter Capital (USD) : 3,271,000Turnover in 2014 (USD) : 4,468,000Main Technology : Injection molding and injection plasticsMain Customers : Canon, Samsung, Kyocera, Korg, Toho…Quality Certificates : ISO 9001:2008Other information : ISO 14001:2004
Person in charge : Mr. TRAN ANH VUONGPosition : ChairmanAddress (Office) : Km7, highway 18, Que Vo IZ, Bac Ninh Province, VietnamTel : +84- 2413 617 933Fax : +84- 2413 617 932Email : [email protected] : http://www.bacvietgroup.com; http://www.lim.vn
Selling ItemsProduct name: Injection MoldUse for: Injection MoldingMinimum lot: 01 set/POMaterial: Steel (NAK, SKD 61…)
Product name: Injection MoldUse for: Injection MoldMinimum lot: 01 set/POMaterial: Steel (NAK, SKD 61…)
Product name: Electronic partsUse for: PrinterMinimum lot: 500,000 pcsMaterial: POM, ABS, PBT, HI-PS…
Product name: Phone partsUse for: Smart phoneMinimum lot: 100,000 pcsMaterial: PC, PU
Product name: Motorcycle partsUse for: Motorcycle partsMinimum lot: 5,000 pcsMaterial: POM, PP, ABS…
Product name: Electronic partsUse for: Sound control deviceMinimum lot: 50,000 pcsMaterial: ABS, PC, PMMA…
Company Profile
Contact Information
Our major products are injection molds and electronic plastics, technical plastics and precision plastics
VN 04
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
72
VIETNAMESE COMPANy
BINH MINH TMC CO.,LTD
Establishment year : 2008Number of Employees : 110Factory Address : Plot A2 - CN5, Tu Liem Industrial Zone, Tu Liem District, Ha Noi, Viet Nam.Factory space (m2) : 1,800Charter Capital (USD) : 1,512,374 Turnover in 2014 (USD) : 1,600,000Main Technology : Design and manufacture jigs, moulds and precision parts for machines. Main Customers : Yamaha, Honda, Hoya, Canon, Panasonic, Meiko...Quality Certificates : N/AOther information : N/A
Person in charge : Mr. NGUYEN VAN TUANPosition : General DirectorAddress (Office) : Plot A2 - CN5, Tu Liem Industrial Zone, Tu Liem District, Ha Noi, Viet Nam. Tel : + 84 - 904 166 268Fax : N/AEmail : [email protected] Website : http://binhminhtmc.com
Selling ItemsProduct name: Inspection JigUse for: N/AMinimum lot: 01 pcMaterial: S45C,SKD11
Product name: Assembly JigUse for: N/AMinimum lot: 01 pcMaterial: SKD11, SCM435, MC-Nylon,S45C
Product name: Welding JigUse for: N/AMinimum lot: 01 pcMaterial: SUS304,A6061
Product name: Assembly JigUse for: N/AMinimum lot: 01 pcMaterial: A2017, SKD11, S45C
Product name: Injection MoldUse for: N/AMinimum lot: 01 pcMaterial: P20,S50C
Product name: Punching moldUse for: N/AMinimum lot: 01 pcMaterial: SKD11
Company Profile
Contact Information
QUALITY IS THE FIRST
VN 05
73VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
CLOUD AND DRAGON CO.,LTD
Establishment year : 09/04/1999Number of Employees : 200Factory Address : 15A - An Tri Road - Hung Vuong Ward, Hong Bang District, Hai Phong City, VietnamFactory space (m2) : 20,000Charter Capital (USD) : 1,200,000Turnover in 2014 (USD) : 7,000,000Main Technology : Injection molding & extrusion blow moldingMain Customers : LG Viet nam; Total, Idemitsu; Katara Tomy…Quality Certificates : ISO 9001-2008, ISO 140001, ROHSOther information : N/A
Person in charge : Mr. NGUYEN TRONG TUANPosition : DirectorAddress (Office) : 15A - An Tri Road, Hung Vuong Ward.,Hong Bang District, Hai Phong City, VietnamTel : +84 - 31- 3798 886 / +84 - 986 333 028Fax : + 84 - 31-3798 887Email : [email protected] : http://www.vanlongplastic.com.vn
Selling ItemsProduct name: washing-machine-CoverUse for: Process plastic detailMinimum lot: 30,000 pcsMaterial: ABS, PP
Product name: vacuum cleane coverUse for: Process plastic detailMinimum lot: 30,000 pcsMaterial: ABS,PP
Product name: TOMy-TOyUse for: Tomy’s toyMinimum lot: 50,000 pcsMaterial: HDPE
Product name: Can-PE BottleUse for: lubricantsMinimum lot: 20,000 pcsMaterial: HDPE
Product name: Can-PE BottleUse for: comesticsMinimum lot: 20,000 pcsMaterial: HDPE
Product name: Can-PE BottleUse for: comesticsMinimum lot: 30,000 pcsMaterial: HDPE
Company Profile
Contact Information
VN 06
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
74
VIETNAMESE COMPANy
COSMOS INDUSTRIAL CO.,LTD
Establishment year : 2005Number of Employees : 1,800Factory Address : Khai Quang IZ, Vinh Yen city, Vinh Phuc Province, Vietnam : Thuy Van IZ, Viet Tri city, Phu Tho Province, VietnamFactory space (m2) : 74,000Charter Capital (USD) : 28,000,000Turnover in 2014 (USD) : 48,500,000Main Technology : Metal part manufacturing, mold design/manufacturing.Main Customers : Honda Vietnam, Panasonic, Murata LedsQuality Certificates : ISO 9001:2008, ISO14001:2004Other information : 5S, Kaizen, TPS Learning & Practices
Person in charge : Mr. NGUYEN HOANG CONGPosition : Business DirectorAddress (Office) : Khai Quang IZ, Vinh Yen City, Vinh Phuc province, Vietnam Tel : +84 - 211 372 1138Fax : +84 - 211 384 7877Email : [email protected] : http://cosmos.com.vn
Selling ItemsProduct name: PressingUse for: Motorbike, Home AppliancesMinimum lot: 2,000 pcsMaterial: SPCC, SPHC, SGCC, SECC, STAM390G
Product name: WeldingUse for: MotorbikeMinimum lot: 2,000 pcs Material: SPHC, SWRM10, STAM390G, S10-50C, ...
Product name: LatheUse for: MotorbikeMinimum lot: 1,000 pcsMaterial: SWRM10,S30-50C, SK85, SUJ2, ...
Product name: BendingUse for: MotorbikeMinimum lot: 1,000 pcsMaterial: SWRM10, S10~S50C, STAM390G, ...
Product name: Pressing moldUse for: Motorbike, Home AppliancesMinimum lot: 01 setMaterial: SKD11,SS400,KM12
Product name: Injection Rubber MoldUse for: AutomobileMinimum lot: 01 setMaterial: SKD11,SS400,KM12
Company Profile
Contact Information
We are expert in pressing mold and sheet metal processing
VN 07
75VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
DONG HAI PLASTIC ONE MEMBER CO.,LTD
Establishment year : 2002Number of Employees : 150Factory Address : Km39, 5 Road, Binh Giang District, Hai Duong Province, VietnamFactory space (m2) : 12,000Charter Capital (USD) : 1,700,000Turnover in 2014 (USD) : 4,800,000Main Technology : Injection; moldingMain Customers : Panasonic Vietnam, LG Vietnam, Uniden Vietnam….Quality Certificates : ISO 9001:2008 ISO 14000:2004Other information : N/A
Person in charge : Mr. NGUYEN VAN HAIPosition : General ManagerAddress (Office) : Km39, 5 Road, Binh Giang District, Hai Duong Province, VietnamTel : +84 - 943 913 779Fax : +84 - 320 3775 078Email : [email protected] : http:// nhuadonghai.com
Selling ItemsProduct name: Phone caseUse for: TelephoneMinimum lot: 50,000 pcsMaterial: plastic
Product name: Phone caseUse for: TelephoneMinimum lot: 50,000 pcsMaterial: plastic
Product name: Phone caseUse for: TelephoneMinimum lot: 50,000 pcsMaterial: plastic
Product name: Nan plastic blisterUse for: extra-interior decorationMinimum lot: 30,000 pcsMaterial: plastic
Product name: paint bucket and industry oil bucket Use for: receptacleMinimum lot: 20,000 pcsMaterial: plastic
Product name: closthes hookUse for: for appliancesMinimum lot: 50,000 pcsMaterial: plastic
Company Profile
Contact Information
VN 08
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
76
VIETNAMESE COMPANy
ECO VIETNAM CO.,LTD
Establishment year : 2010Number of Employees : 120Factory Address : Lot II.8.1, Khai Son IZ, Thuan Thanh District, Bac Ninh Province, Viet NamFactory space (m2) : 8,000Charter Capital (USD) : 3,408,015Turnover in 2014 (USD) : 3,000,000 Main Technology : Mechanics – Electrics, Pressing/Processing in metal sheetMain Customers : SAMSUNG, PANASONIC, IDEMITSU, JAGUAR, YS VINA, INAVINA, APP, VHPQuality Certificates : ISO 9001:2008Other information : N/A
Person in charge : Mr. BUI DINH HIEU Position : Vice DirectorAddress (Office) : Lot II.8.1, Khai Son IZ, Thuan Thanh District, Bac Ninh Province, Viet Nam Tel : +84 - 241 3798 483Fax : +84 - 241 3798 484Email : [email protected]; [email protected] : http:// www.ecovn.vn
Selling ItemsProduct name: Pressed partsUse for: Motorbike, sewing machines,… Minimum lot: N/AMaterial: Steel
Product name: Steel can (15L, 18L, 20L) Use for: Can for chemical; Can for oil; Can for foodsMinimum lot: N/AMaterial: Steel
Product name: Steel pipeUse for: Interior Furniture, Industry, Vacuum cleanerMinimum lot: N/AMaterial: Steel
Product name: Rotor & Stato Use for: Motor core Minimum lot: N/AMaterial: Silicon Steel
Product name: Steel Drum Use for: Drum for chemicals; Drum for oil; Drum for foods Minimum lot: N/AMaterial: Steel
Company Profile
Contact Information
Professional parts, high-quality productsTogether we develop
VN 09
77VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
ECOTEK CO.,LTD
Establishment year : 2011Number of Employees : 100Factory Address : Thuan Thanh 3 Industrial Zone, Thuan Thanh District, Bac Ninh Province, VietnamFactory space (m2) : 6,200Charter Capital (USD) : 2,000,000Turnover in 2014 (USD) : N/AMain Technology : Designing and manufacturing mold, plastic injection, assemblingMain Customers : MUTO, TENMAQuality Certificates : ISO 9001: 2008; ISO 14001:2004Other information : 5S, KAIZEN
Person in charge : Mr. BUI XUAN HAIPosition : DirectorAddress (Office) : Thuan Thanh 3 Industrial Zone, Thuan Thanh District, Bac Ninh Province, VietnamTel : +84 - 241 379 8889Fax : +84 - 241 379 8890Email : [email protected] : http//eco-tek.vn
Selling ItemsProduct name: Plastic componentsUse for: Printer, computer and connector parts.Minimum lot: 20,000 pcsMaterial: PC, ABS
Product name: Plastic componentsUse for: Printer, computer and connector parts.Minimum lot: 20,000 pcsMaterial: PC, ABS
Product name: Plastic componentsUse for: Printer, computer and connector parts.Minimum lot: 20,000 pcsMaterial: PC, ABS
Product name: Plastic componentsUse for: Printer, computer and connector parts.Minimum lot: 20,000 pcsMaterial: PC, ABS
Product name: Injection MoldUse for: Plastic pipes and fittingsMinimum lot: 1 pcMaterial: Carbon steel, stainless steel
Product name: Injection MoldUse for: Plastic pipes and fittingsMinimum lot: 1 pcMaterial: Carbon steel, stainless steel
Company Profile
Contact Information
VN 10
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
78
VIETNAMESE COMPANy
GIAI PHONG RUBBER CO.,LTD
Establishment year : 2004Number of Employees : 180Factory Address : Ngoc Da, Tan Quang, Van Lam District, Hung Yen province, VietnamFactory space (m2) : 3,500 Charter Capital (USD) : 1,000,000 Turnover in 2013 (USD) : 3,500,000 Main Technology : Rubber Part Molding, Plastic&PVC Part Injection Plastic Painting Spraying.Main Customers : Nippon Seiki, ASTI, LG, Panasonic, Nissin Brake….Quality Certificates : ISO9001:2008 ; ISO14000:2004Other information : Giai Phong Rubber Co., Ltd is a leading Plastic, PVC and rubber parts maker in Vietnam. Our parts supply to Japanese, Korean, Taiwan Company in Vietnam and Export to Asia (Japan & Thailand) also.
Person in charge : Mr. LE ANH DUCPosition : Factory ManagerAddress (Office) : Ngoc Da, Tan Quang, Van Lam District, Hung Yen province, VietnamTel : +84 - 4 - 3677 0567Fax : +84 - 4 - 3677 0565Email : [email protected] : http://giaiphongrubber.com http://caosugiaiphong.com
Selling ItemsProduct name: SocketUse for: Wiring HarnessMinimum lot: 5,000 pcsMaterial: EPDM, Silicone
Product name: GrommetUse for: IndustrialMinimum lot: 5,000 pcsMaterial: Rubber
Product name: DamperUse for: IndustrialMinimum lot: 5,000 pcsMaterial: EPDM, NR, NBR
Product name: Terminal CoverUse for: Wiring Harness Minimum lot: 5,000 pcsMaterial: soft PVC
Product name: SleeveUse for: Wiring HarnessMinimum lot: 5,000 pcsMaterial: soft PVC
Company Profile
Contact Information
Giai Phong Rubber Co., Ltd (GPR) are specialized in manufacturing quality products such as plastics, soft PVC and rubber parts by Viton, ACM, Silicone, NBR, EPDM, NR, Neoprene material. As an ISO9001 & ISO14001- certified company, GPR is supplied with Good Quality – Best Cost – Delivery. We can design and make compression and injection mould by ourself with advance CNC machine.
Product name: Connector CoverUse for: Wiring HarnessMinimum lot: 5,000 pcsMaterial: Rubber & PVC
VN 11
79VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
HAI VAN PRECISION EQUIPMENT CO.,LTD
Establishment year : 2004Number of Employees : 55Factory Address : Cong Ha Village, Ha Man commune, Thuan Thanh District, Bac Ninh province, Viet NamFactory space (m2) : 10,000Charter Capital (USD) : 1,000,000Turnover in 2014 (USD) : 1,600,000Main Technology : Jig and moldMain Customers : Canon VietNam Co., LtdQuality Certificates : N/AOther information : Quality – Progress are above all. The development of the Clients is our existence and development
Person in charge : Mr. HOANG VAN THAIPosition : DirectorAddress (Office) : No 8/161 Thinh Quang , Tay Son, Dong Da District, Ha Noi, Viet Nam.Tel : +84 - 4 -3853 7808Fax : N/AEmail : [email protected] : http://www.cokhihaivan.com
Selling ItemsProduct name: HV001Use for: Assembly of Electronic ComponentsMinimum lot: 1 pcMaterial: S45C, SS400, SUS304, A6061,…
Product name: HV002Use for: Assembly of Electronic ComponentsMinimum lot: 1 pcMaterial: A6061
Product name: HV003Use for: Motorcycle AssemblyMinimum lot: 1 pcMaterial: SCM435, S45C, SUS304, A5052, POM
Product name: HV004Use for: Machinery partMinimum lot: 1 pcMaterial: SS400
Product name: HV005Use for: ElectronicMinimum lot: 1 pcMaterial: SKS3
Product name: HV006Use for: Assembly of Electronic ComponentsMinimum lot: 1 pcMaterial: S45C, SUS440C
Company Profile
Contact Information
VN 12
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
80
VIETNAMESE COMPANy
HANOI MECHANICAL CO.,LTD
Establishment year : 1958Number of Employees : 400Factory Address : Thuan Thanh 3 Industrial Park, Thanh Khuong Commune, Thuan Thanh District, Bac Ninh province, Vietnam Factory space (m2) : 16,000 Charter Capital (USD) : 3,000,000Turnover in 2010 (USD) : 20,000,000Main Technology : Mechanical ManufacturingMain Customers : EVN (Vietnam), PILOUS (the Czech Republic), SMS, Danielli (Italy) …Quality Certificates : ISO 9001:2008Other information :
Person in charge : Mr. DO HOAI NAMPosition : Manager – Dept of Technology & EconomyAddress (Office) : 76 Nguyen Trai Street, Thanh Xuan District, Hanoi, VietnamTel : +84 - 4 - 3858 4475Fax : +84 - 4 - 3858 3268Email : [email protected] : http://www.hameco.com.vn
Selling ItemsProduct name: Gears of all typesUse for: Industrial equipmentMinimum lot: as per requirement (max diameter up to 4,000mm, module 30)Material: Steel, Iron pig
Product name: Gear shaftsUse for: Industrial EquipmentMinimum lot: as per requirementMaterial: Steel
Product name: casting partsUse for: industrial productsMinimum lot: as per requirement (12,000ton/year)Material: iron casting, steel casting
Product name: parts of pumpsUse for: water pumpsMinimum lot: as per requirement Material: steel, pig iron
Product name: parts of hydropower stationsUse for: hydropower stationsMinimum lot: as per requirementMaterial: steel, iron pig, etc
Company Profile
Contact Information
Product name: heat treatment partsUse for: MachineryMinimum lot: as per requirementMaterial: Steel, pig iron
VN 13
81VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
HP-TECH VIETNAM ENGINEERING AND MOLDS JSC
Establishment year : 2012Number of Employees : 50Factory Address : Km 10, Highway No.5, Duong Xa, Gia Lam District, Ha Noi, Viet namFactory space (m2) : 10,000Charter Capital (USD) : 500,000Turnover in 2014 (USD) : 800,000Main Technology : Making die, mould, jig and stampingMain Customers : Technocom, Innotek, TS VietNam, Kyoei VN, Hyakuzo JP.Quality Certificates : 9001:2008Other information : The high design capacity, Assurance of quality and progress, take satisfaction for customers
Person in charge : Mr. NGUYEN VIET HUNGPosition : Vice DirectorAddress (Office) : Km 10, Highway No.5, Duong Xa, Gia Lam District, Ha Noi, VietnamTel : +84- 43- 6789 527 (+84 912 031 698 mobile phone)Fax : +84- 43 - 6789 517Email : [email protected] : http://hptechvn.com
Selling ItemsProduct name: Cam die one time 4 hole 1Use for: motorcycleMinimum lot: 1 pcMaterial: SKD11, S55C..
Product name: Progressive die 1; one time two pcs Use for: motorcycleMinimum lot: 1 pcMaterial: SKD11, S55C..
Product name: Progressive die 2; one time two pcs Use for: motorcycleMinimum lot: 1 pcMaterial: SKD11, S55C..
Product name: Layout; 13 Step; one time one pcsUse for: motorcycleMinimum lot: 10,000 pcsMaterial: SPCC
Product name: Pipe comUse for: motorcycleMinimum lot: 10,000 pcsMaterial: SPCC
Product name: Lay out; one time two pcsUse for: motorcycleMinimum lot: 10,000 pcsMaterial: SPCC
Company Profile
Contact Information
Always take the satisfaction customers with the highest quality, the most competitive price and the best delivery time.Always take the satisfaction for our customers is our success
VN 14
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
82
VIETNAMESE COMPANy
HTH TRUONG PHAT JSC
Establishment year : 2008Number of Employees : 15Factory Address : Lot 49G, Quang Minh industrial park, Me Linh District, Hanoi, Vietnam Factory space (m2) : 700Charter Capital (USD) : 300,000Turnover in 2014 (USD) : 500,000Main Technology : Materials & services for wear protectionMain Customers : Cement, Oil & Gas, Automobile…Quality Certificates : N/AOther information : N/A
Person in charge : Mr. TRINH VAN HAIPosition : DirectorAddress (Office) : 59/124 Nguyen Hoang Ton Street, Tay Ho District, Hanoi Tel : +84 - 4 - 3753 4303Fax : +84 - 4 - 3758 3374Email : [email protected] : http://www.phuhopkim.vn
Selling ItemsProduct name: Stainless steel abrasivesUse for: Mould, automobile, motorbikeMinimum lot: N/AMaterial: Stainless steel
Product name: Shot blasting serviceUse for: Mould, Automobile and motorbikeMinimum lot: N/AMaterial: Stainless steel
Product name: PTA Coating Use for: Cement. Oil & Gas Automobile…Minimum lot: N/AMaterial: alloys powder
Product name: Hardfacing by FCW weldingUse for: Cement, Oil & Gas...Minimum lot: N/AMaterial: Alloys wire
Company Profile
Contact Information
VN 15
83VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
HUNG DUNG CO.,LTD
Establishment year : 1998Number of Employees : 120Factory Address : Km 42 + 600, 5A Highway, Lai Cach Town, Cam Giang District, Hai DuongFactory space (m2) : 15,000Charter Capital (USD) : 500,000Turnover in 2014 (USD) : 1,000,000Main Technology : N/AMain Customers : Jaguar (Japan), Tam Kim ( Roman ), Mai Lam (Nival), Sang Viet (E-link)…Quality Certificates : ISO 9001:2008Other information : N/A
Person in charge : Mr. NGUYEN TIEN DUNGPosition : DirectorAddress (Office) : Km 42 + 600, 5A Highway, Lai Cach Town, Cam Giang District, Hai DuongTel : +84 - 32 0378 3399Fax : +84 - 32 0378 2396Email : [email protected] Website : http://hungdunghd.com
Selling ItemsProduct name: Motorcycle spare partsUse for: MotorcycleMinimum lot: N/AMaterial: N/A
Product name: Power switching supplieUse for: Multiple applicationMinimum lot: N/AMaterial: N/A
Product name: Electronic component assemblies Use for: Any machinesMinimum lot: N/AMaterial: N/A
Product name: Automation & controlUse for: Multiple applicationMinimum lot: N/AMaterial: N/A
Product name: Led lightsUse for: LightingMinimum lot: N/AMaterial: N/A
Product name: UPSUse for: DoorMinimum lot: N/AMaterial: N/A
Company Profile
Contact Information
VN 16
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
84
VIETNAMESE COMPANy
ICHI VIETNAM SUPPORTING INDUSTRy JSC
Establishment year : 2008Number of Employees : 68Factory Address : Lot 05/9B, Hoang Mai Industrial Zone, Hoang Mai District, HanoiFactory space (m2) : 2,400Charter Capital (USD) : 1,000,000Turnover in 2014 (USD) : 960,000Main Technology : Milling & Drilling CNC MachineMain Customers : Sumitomo Wiring System, Denso Vietnam, Foster Electric, Hamaden Vietnam, Yazaki, Samsung Vendors (level1)Quality Certificates : ISO 9001:2008Other information : N/A
Person in charge : Mr. PHAM HOANG LONGPosition : General DirectorAddress (Office) : Lot 05/9B, Hoang Mai Industrial Zone, Hoang Mai District, HanoiTel : +84 - 43 645 44 32Fax : N/AEmail : [email protected] : http://ichivietnam.com.vn
Selling ItemsProduct name: Mold Part Dimension: 600x400x25Minimum lot: 10 EA (10 EA/day)Material: KD 11Made by: SKD 11
Product name: Assembly JigDimension: 200x200x60Minimum lot: 1 EA (200 EA/day)Material: C45 - Zn CoatingMade by: Matsuura MC-600C
Product name: Go-No Go JigDimension: 150x50x5Minimum lot: 100 EA (400 EA/day)Material: A6061-AnodizingMade by: Toyosk 30VJ
Product name: Checking JigDimension: 200x80x20Minimum lot: 200 EA (200 EA/day)Material: POMMade by: Toyosk 30VJ
Product name: Cooling PartDimension: 600x600x300Minimum lot: 50 EA (1 EA/day)Material: A5052PMade by: Makino FNC-125
Company Profile
Contact Information
ICHI VIETNAM is a manufacturer, specializing in producing/processing jig & mould and precision parts. Our customers/partners are Japanese and Korean companies, including automobile, motor, electrical, Jig, machine & plastic product for industry & civil manufacturers. Using Japanese machines/equipments/devices, combining Japanese management methods and Vietnamese operators to produce the best product/services with a reasonable price.
Product name: Checking JigDimension: 600x400x100Minimum lot: 10 EA (20 EA/day)Material: A6061Made by: Robot Drill T14iA
VN 17
85VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
INDUSTRIAL MECHANICS AND AUTOMATION CO.,LTD
Establishment year : 2008Number of Employees : 72Factory Address : No 4, Lot 2, Lai Xa Industrial Zone, Kim Chung, Hoai Duc District, Hanoi, Vietnam.Factory space (m2) : 1,400Charter Capital (USD) : 230,000Turnover in 2014 (USD) : 2,100,000Main Technology : Assembly, Mold manufacturing, Machining parts, …Main Customers : Canon, Mobase, Bridgestone, FineteckQuality Certificates : ISO 9001:2008Other information : N/A
Person in charge : Mr. TRAN CAO KHANHPosition : DirectorAddress (Office) : No 4, Lot 2, Lai Xa Industrial Zone, Kim Chung, Hoai Duc District, Hanoi, Vietnam.Tel : +84 - 4 6296 2032Fax : +84 - 4 3366 0886Email : [email protected] : http://www.idmea.com
Selling ItemsProduct name: ConveyorUse for: Transporting and packing the goods.Minimum lot: N/AMaterial: Stell, aluminum, electrical materials
Product name: RollerUse for: Transporting and packing the goods.Minimum lot: N/AMaterial: Stell
Product name: JigUse for: Jigs are used to stable the position of productsMinimum lot: N/AMaterial: Plastic, stell, aluminum
Product name: ShelfUse for: Use to contain the cargoMinimum lot: N/AMaterial: Stell, inox
Product name: TrolleysUse for: Use to contain the cargo and ship them to other place in factoryMinimum lot: N/AMaterial: Stell, inox
Product name: Working tableUse for: Working tables are used to support workers in assembly timeMinimum lot: N/AMaterial: Wood, Stell, inox
Company Profile
Contact Information
VN 18
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
86
VIETNAMESE COMPANy
INNOTEK JOINT STOCK COMPANy
Establishment year : 2011Number of Employees : 300Factory Address : Lot II – 4.1, Que Vo II Industrial Zone, Que Vo District, Bac Ninh Province, VietnamFactory space (m2) : 25,000Charter Capital (USD) : 6,000,000Turnover in 2014 (USD) : 3,000,000Main Technology : Stamping & Pressing, Welding, Bending, Turning, Cutting, Lathe, Taro,... Main Customers : Honda Vietnam, Micro Matic, Thai Steel Cable, Showa, Jaguar, VPIC…Quality Certificates : ISO 9001:2008, ISO 14001:2004Other information : Innotek’s business strategy is always to harmonize social benefits and our benefits. We provide products with reliable quality and reasonable price.Our objective is quality product, competitive price, punctual delivery and after sales services perfect.
Person in charge : Mr. DO KHAC DUY VU / Ms. NGUYEN THI NHANPosition : General Director / Deputy General DirectorAddress (Office) : Lot II – 4.1, Que Vo II Industrial Zone, Que Vo District, Bac Ninh Province, VietnamTel : +84 - 241 - 362 3318 Fax : +84 - 241 - 362 3319Email : [email protected] / [email protected] : http:// www.innotek.com.vn
Selling ItemsProduct name: Pressing products Use for: Automobile, othersMinimum lot: 1,000 pcsMaterial: SPHC, SUS304…
Product name: Pressing products Use for: AutomobileMinimum lot: 1,000 pcsMaterial: SPHC, SUS304…
Product name: Welding productsUse for: AutomobileMinimum lot: 1,000 pcsMaterial: SPHC, SWRM…
Product name: Welding productsUse for: AutomobileMinimum lot: 1,000 pcsMaterial: SPHC, SWRM…
Product name: Bending productsUse for: AutomobileMinimum lot: 1,000 pcsMaterial: SWRM10, SPCC…
Product name: Turning productsUse for: Automobile, othersMinimum lot: 1,000 pcsMaterial: SUS304, S15C…
Company Profile
Contact Information
Innotek’s business is majoring in manufacturing automobile-motorcycle parts and components in supporting industrial. Manufacturing quality products to satisfy with customer’s demand is the goal of our work and strategies.
VN 19
87VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
JAT AUTOPARTS AND INDUSTRy EQUIPMENTS PRODUCTION JSC
Establishment year : 2008Number of Employees : 266Factory Address : Lot II-8.2 Que Vo II IZ, Ngoc Xa Communce, Que Vo District, Bac Ninh Province, VietnamFactory space (m2) : 15,000Charter Capital (USD) : 400,000Turnover in 2014 (USD) : 5,970,000Main Technology : Pressing, Welding, MachiningMain Customers : Honda VN, Piaggio VN, VAP, Ariston..Quality Certificates : ISO 9001:2008, ISO 140001Other information : N/A
Person in charge : Mr. TRAN DUY NHATPosition : DirectorAddress (Office) : Lot II-8.2 Que Vo II IZ, Ngoc Xa Communce, Que Vo District, Bac Ninh Province, VietnamTel : +84 - 241 3623 069Fax : +84 - 241 3623 068Email : [email protected]/[email protected] : http://www.jat-autopart.com
Selling ItemsProduct name: BracketUse for: Motorbike partMinimum lot: 5,000 pcsMaterial: steel
Product name: Joint, BreatherUse for: Motorbike partMinimum lot: 5,000 pcsMaterial: steel
Product name: Collar muff mountUse for: Motorbike partMinimum lot: 5,000 pcsMaterial: steel
Product name: ClampUse for: AutopartMinimum lot: 5,000 pcsMaterial: steel
Product name: Bent cassing capUse for: AutopartMinimum lot: 5,000 pcsMaterial: steel
Company Profile
Contact Information
JAT company specializes in the field of manufacturing auto parts, motorbike parts, industrial equipment and other mechanical products for supporting industry.Our current production lines and sections are: 1.Pressing section with 43 press machine from 20MT to 180MT; 2. welding section (TIG welding machines, MIG - MAG welding machines, SPOT welding machines); and 3. Machining section( CNC lathes, hydraulic lathes, Sanga lathes, specialized lathes..), Drilling machines, Tapping machines, broaching machines, milling machines, band saw cutting machines, circular saw cutting machines, tube end expanding, tube bending…
Product name: Round flangeUse for: Industrial Equipment Minimum lot: 5,000 pcsMaterial: steel
VN 20
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
88
VIETNAMESE COMPANy
LEGROUP MANUFACTURING & TRADING JSC
Establishment year : 2004Number of Employees : 600Factory Address : Lot 15 Quang Minh Industrial park, Me Linh District, Hanoi, VietnamFactory space (m2) : 20,000Assets (USD) : 7,100,000Turnover in 2014 (USD) : 20,000,000Main Technology : Stamping, Pressing, Bending, Welding, PlatingMain Customers : Honda, Goshi, Piaggio, SYM, Taico (Hoshizaki, Toho), Iwatani, Japanese trading companies and European trading companies. Quality Certificates : ISO 14001-2004 in 2015; ISO 9001-2008 in 2010; International Arch of Europe Golden Award in 2015; Vietnam Trusted Quality Supplier by GTA Global, UK, in 2014 & 2015; The best supplier for Q&D by Goshi Vietnam in 2013; The best overall supplier by Piaggio Vietnam in 2010Other information : Quality to last, Price to afford, Delivery to defeat time! Reaching theSummit, meeting customers’ satisfaction.
Person in charge : Ms. LE THI NGOC LAN Position : Deputy CEOAddress (Office) : Lot 15 Quang Minh Industrial park, Me Linh District, Hanoi, VietnamTel : +84 - 4 - 3818 2522Fax : +84 - 4 - 3818 2511Email : [email protected]; [email protected], [email protected] : http://www.legroup.com.vn
Selling ItemsProduct name: Central StandsUse for: ScooterMinimum lot: N/AMaterial: STKM, SPCC, SPHC, S35C, S45C,
Product name: filter basketUse for: General industrial Minimum lot: N/AMaterial: SUS304,
Product name: MufflerUse for: ScooterMinimum lot: N/AMaterial: SUS304, SUS409
Product name: Handle barUse for: Scooter Minimum lot: N/AMaterial: SPFH590
Product name: Other partUse for: FurnitureMinimum lot: N/AMaterial: SPCC
Product name: 2l keg beerUse for: Breweries Minimum lot: N/AMaterial: SUS304
Company Profile
Contact Information
LeGroup manufactures and supplies steel-based products to motorcycle, automobile, brewery, furniture, electrical, electronic and other general industries. The products are including but not limited to mufflers, handle bars, stands, frames for motorcycles, kegs/ tanks for draught beer, metal products for automobile, for electrical & electronic, and for furniture industries.
VN 21
89VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
MANH QUANG CO.,LTD
Establishment year : 1983Number of Employees : 250Factory Address : Kim Giang Road, Thanh Liet Commun , Thanh Trì Ward, Hanoi capital, VietnamFactory space (m2) : 27,000Charter Capital (USD) : 4,500,000Turnover in 2014 (USD) : 15,000,000Main Technology : Hot and Cold forging, Fine Blanking press, Machining, Gear Techlonogy, Heat treatment. Main Customers : Honda Vietnam, Sumitomo….Quality Certificates : 9001: 2008Other information : N/A
Person in charge : Mr. NGUYEN MANH QUANGPosition : Assistant DirectorAddress (Office) : 201 Hue street, Hai Ba Trung District, Ha Noi, VietnamTel : +84 - 43 688 3376 (+84 9 03 679 650 mobile phone )Fax : +84 - 43 688 3378Email : [email protected] : http://manhquang.com or http://manhquang.vn
Selling ItemsProduct name: Sprocket and chainUse for: motorcycleMinimum lot: 500 pcsMaterial: SCR420, S45C
Product name: GearsUse for: Machine, vehicleMinimum lot: 500 pcsMaterial: S45C, SCR420, SCM420…
Product name: Shaft and spindleUse for: Machine, vehicleMinimum lot: 500 pcsMaterial: S45C, SCR420, SCM420
Product name: Ball race bearingUse for: MotorcyleMinimum lot: 1,000 pcsMaterial: SCM435
Company Profile
Contact Information
We can provide gear, shaft and spindle, sprocket for machine and vehicle with 100% process in house. Beside that, we also can supply fine blanking parts, hot and cold forging parts, heat treatment service like carburizing, carbunitriding, inductioning...
Product name: Fine Blanking partsUse for: Machine, VehicleMinimum lot: 10,000 pcsMaterial: SPCC,SCM415…
Product name: Cold forging PartsUse for: EverythingMinimum lot: 10,000 pcsMaterial: S20C, SCM420, SCM435…
VN 22
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
90
VIETNAMESE COMPANy
MINH DUNG CO.,LTD
Establishment year : 2007Number of Employees : 104Factory Address : Keu Zone - Dao Duc Commune – Binh xuyen District - Vinh Phuc ProvinceFactory space (m2) : 10,000 Charter Capital (USD) : 1,700,000Turnover in 2014 (USD) : 500,000Main Technology : Carton production line, Mechanical manufacturing equipmentMain Customers : Honda Vietnam , Toyota Vietnam, Piaggio Viet Nam, UJU Vina, Heasung Vina, ToTo…Quality Certificates : ISO 9001:2008Other information : “Safety first - Assurance of Customer about the quality of the product - Assurance of employee when dedication”
Person in charge : Mr. HA HUU TUYEN Position : DirectorAddress (Office) : Keu Zone, Dao Duc Commune, Binh xuyen District Vinh Phuc Province, VietnamTel : + 84 9 1234 6688 (+ 84 907 826 888 )Fax : + 84 - 211 359 3388Email : [email protected] Website : http://www.minhdung.vn
Selling ItemsProduct name: Product CartonUse for: Packaging productsMinimum lot: 30,000 pcsMaterial: carton
Product name: plastic box and plastic trayUse for: Packaging productsMinimum lot: 200 trip Material:
Product name: TransportionUse for: Transportion of goodMinimum lot: 10,000 pcsMaterial: Truck
Product name: Steel Case Use for: Packaging productsMinimum lot: 3,000 pcsMaterial: steel
Product name: steel palletsUse for: Shelves for goodsMinimum lot: 1,000 pcsMaterial: Steel
Product name: Dedicated trolleyUse for: goods transportationMinimum lot: 100 pcsMaterial: steel
Company Profile
Contact Information
“ With the slogan “Quality - Cost - Delivery” we hope to best meet with customer requirements “.
VN 23
91VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
MINH QUANG TRADING & INDUSTRIES CO.,LTD
Establishment year : 2004Number of Employees : 150Factory Address : 61 team, Dong Anh town, Dong Anh District, Hanoi, VietnamFactory space (m2) : 7,700Charter Capital (USD) : 843,000Turnover in 2014 (USD) : 2,700,000Main Technology : CNC Lathing, Pressing, FormingMain Customers : Showa Vietnam, FCC Vietnam, KYB Vietnam, Mitsuboshi Forming Vietnam, TOTO Vietnam, KYB Asia, Honda Philippine INC, Showa Do Brasil.Quality Certificates : ISO 9001-2008Other information : Try the best to get the highest sastification of customers
Person in charge : Mr. LE MINH GIANGPosition : General DirectorAddress (Office) : 61 team, Dong Anh town, Dong Anh District, Hanoi, VietnamTel : +84- 4- 2211 8360 (Mobile: +84-91-324 7800)Fax : +84-4- 3965 2536Email : [email protected], [email protected] : http://www.mqc.com.vn
Selling ItemsProduct name: WasherUse for: motorcycle partsMinimum lot: 1,000 pcs/monthMaterial: Steel (SPCC, SPHC, SAPH,…); copper
Product name: Seat B SpringUse for: motorcycle partsMinimum lot: 1,000 pcs/monthMaterial: Steel (SS400, S20C,..)
Product name: Lever/RodUse for: Agriculture machineMinimum lot: 500 pcs/monthMaterial: Steel (S45C, S35C, S20C,…)
Product name: Special NutUse for: shower accessoriesMinimum lot: 1,000 pcs/monthMaterial: copper (C3604BD); inox (SUS304)
Company Profile
Contact Information
MINH QUANG TRADING & INDUSTRIES CO., LTD has experience in manufacturing mechanical products, processing parts based on the customers’ design drawing.
Product name: CylinderUse for: motorcycle partsMinimum lot: 1,000 pcs/monthMaterial: Steel (STKM11A, STKM12B,…)
Product name: Stem ShaftUse for: motorcycle partsMinimum lot: 500 pcs/monthMaterial: Steel (STKM13C, 35GB, SAE1020, STAM390G…)
VN 24
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
92
VIETNAMESE COMPANy
PRECISION MECHANICS AND TECHNOLOGy TRANSFER JSC
Establishment year : 2006Number of Employees : 150Factory Address : 226 Phuc Dien, Xuan Phuong, Tu Liem District, Hanoi, VietnamFactory space (m2) : 3,600Charter Capital (USD) : 500,000Turnover in 2014 (USD) : 4,000,000 Main Technology : Conveyor, Jig, Machine, CNC machineMain Customers : Samsung, Anam, Panasonic, Foster,SEIQuality Certificates : ISO 9001:2008Other information : We provide solutions to improve and enhance production efficiency
Person in charge : Mr. DO TIEN LONG Position : Marketing deputy director Address (Office) : 226 Phuc Dien, Xuan Phuong, Tu Liem District, Hanoi, VietnamTel : 84 - 4 3763 1015 Fax : 84 - 4 3763 1016 Email : [email protected] : http://pmtt.com.vn
Selling ItemsProduct name: Jig cameraUse for: mobileMinimum lot: 100 pcsMaterial: Aluminum A5052
Product name: Jig headphone, speakerUse for: MobileMinimum lot: 100 pcsMaterial: Aluminum A5052 and SUS 304
Product name: Heat presse machineUse for: MobileMinimum lot: 1 pcMaterial: Aluminum A5052, steel C45
Product name: Diaphragm presses machineUse for: Moblie and TiViMinimum lot: 1 pcMaterial: Aluminum A5052 and Steel C45
Product name: Cutter diaphragm machineUse for: MobileMinimum lot: 1 pcMaterial: Aluminum A5052 and Steel C45
Product name: Auto insert Diaphragm and voice coil MachineUse for: MobileMinimum lot: 1 pcMaterial: Aluminum A5052
Company Profile
Contact Information
We provide quality products and reasonable solutions.
VN 25
93VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
PRODETECH JSC
Establishment year : 1996Number of Employees : 80Factory Address : ATATA Factory Km16+500 Thang long Highway Yen Son IZ, Quoc Oai District, Hanoi Capital, VietnamFactory space (m2) : ~ 10,000 Charter Capital (USD) : 2,250,000Turnover in 2014 (USD) : 1,600,000Main Technology : Japan & Korea Main Customers : M&E Contractor ( Japan, Korea, Taiwan, VN )Quality Certificates : ISO 9001 : 2008Other information : ATATA Thermal Break and Soundproof
Person in charge : Mr. NGUYEN XUAN TAIPosition : DirectorAddress (Office) : ATATA Factory Km16+500 Thang long Highway Yen Son IZ, Quoc Oai District, Hanoi Capital, VietnamTel : +84 - 4 33 940 189Fax : +84 - 4 33 678 853Email : [email protected] : http://www.atata.com.vn
Selling ItemsProduct name: Pipe rubber foam insulation Use for: Insulation and Soundproof for HVACMinimum lot: 10,000 pcs/1codeMaterial: Nitril Rubber Insulation
Product name: Sheet rubber foam insulationUse for: Insulation and soundproof for HVACMinimum lot: 2,000 m2/ lot Material: Nitril Rubber Insulation
Product name: Egg and Pyramid Sheet Pu Foam SoundproofUse for: Soundproof for fanMinimum lot: 1,000m2/ lot Material: Pu foam
Product name: Egg sheet rubber foam insulation and soundproof Use for: Silencer for FCU, AHUMinimum lot: 2,000m2/ 1codeMaterial: Nitril Rubber Insulation
Company Profile
Contact Information
We can provide friendly environment HVAC application products / We have new technology / Our products are insulation and soundproof material/ We are the material specialist
Product name: Press coustic rubber foam insulationUse for: Silencer for FCU, AHUMinimum lot: 500m2/ 1codeMaterial: Rubber crushed material
Product name: Pipe support PU FoamUse for: Hanger insulation for chiller pipeMinimum lot: 2,000 set /1 codeMaterial: PU Urethan Insulation
VN 26
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
94
VIETNAMESE COMPANy
SEIKI INNOVATIONS VIETNAM CO.,LTD
Establishment year : 2015Number of Employees : 50Factory Address : D2, Dai Dong, Hoan Son IP, Bac Ninh Province, Vietnam.Factory space (m2) : 2,000Charter Capital (USD) : 500,000Turnover in 2014 (USD) : 295,000Main Technology : Mechanical manufacturing Main Customers : ABB, Hoya, IWI, Myungtech, DenverQuality Certificates : ISO 9001:2008Other information : N/A
Person in charge : Mr. HOANG VAN TRUONG Position : Plant DirectorAddress (Office) : D2, Dai Dong, Hoan Son IP, Bac Ninh Province, Vietnam.Tel : +84 - 2413 848 186Fax : +84 - 2413 848 166Email : [email protected] : http://www.seiki-vn.com
Selling ItemsProduct name: SwitchgearsUse for: ElectricityMinimum lot: 05 pcsMaterial: steel, SUS
Product name: Machinery partsUse for: MachineMinimum lot: 100 pcsMaterial: Steel, AL, SUS
Product name: Machinery FrameUse for: MachineMinimum lot: 10 pcsMaterial: steel, SUS
Product name: Sheet metalUse for: IndustryMinimum lot: 100 pcsMaterial: steel
Product name: Stamping partsUse for: IndustryMinimum lot: 1,000 pcsMaterial: steel, SUS
Product name: Robot for industryUse for: factoryMinimum lot: 01 pcMaterial: steel
Company Profile
Contact Information
Being the top Vietnamese precision metal part manufacturer in the aspects of know-how and human skills.We can provide products with Japanese quality and local price !
VN 27
95VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
SEIKICO PRECISION MECHANICAL CO.,LTD
Establishment year : 2010Number of Employees : 40Factory Address : Lot CN3, Minhkhai SME IZ, Bac Tu liem District, Hanoi, VietnamFactory space (m2) : 1,300Charter Capital (USD) : 250,000Turnover in 2010 (USD) : 1,000,000Main Technology : MachiningMain Customers : Japanese, KoreanQuality Certificates : ISO 9001-2008Other information : N/A
Person in charge : Mr. GIAO THANH SONPosition : DirectorAddress (Office) : Lot CN3, Minhkhai SME IZ, Bac Tu liem District, Hanoi, VietnamTel : +84 - 4 - 3780 5206; +84 - 985 472 963Fax : +84 - 4 - 3780 5205Email : [email protected] : http://www.seikico.net
Selling ItemsProduct name: Copper RingsUse for: ConstructionMinimum lot: 100 pcsMaterial: Copper
Product name: PortUse for: ConstructionMinimum lot: 100 pcsMaterial: Steel
Product name: PistonUse for: HydrolicMinimum lot: 500 pcsMaterial: Steel
Product name: PínsUse for: Electronics, Beverage etc.Minimum lot: 100 pcsMaterial: Stainless
Company Profile
Contact Information
High quality and Prompt Delivery!
Product name: Non-standard screwsUse for: Electricity, Electronic and constructionMinimum lot: 1,000 pcsMaterial: Steel, SUS, Brass
Product name: Valve BodyUse for: Home applicantMinimum lot: 10,000 pcsMaterial: Brass
VN 28
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
96
VIETNAMESE COMPANy
SHENGLI VIETNAM INTERNATIONAL TRADING PRODUCTION CO.,LTD
Establishment year : 2000Number of Employees : 220Factory Address : Lot D9-D10, Dinh Tram Industrial Zone, Viet Yen district, Bac Giang province, Viet NamFactory space (m2) : 15,000Charter Capital (USD) : 100,000Turnover in 2014 (USD) : 4,600,000Main Technology : Rubber and PlasticMain Customers : Roki VN, Piaggio VN, Tokaitrim VN, Nissin VN...Quality Certificates : ISO 9001:2008Other information : N/A
Person in charge : Ms. HOANG THU NGOC (Mobile: 0943 666 638)Position : General DirectorAddress (Office) : Lot D9-D10, Dinh Tram Industrial Zone, Viet Yen district, Bac Giang province, Viet NamTel : +84 - 240 366 1643Fax : +84 - 240 366 1918Email : [email protected] or [email protected] : www.shenglivietnam.com
Selling ItemsProduct name: Tube Air/c ConnecttingUse for: MotorcycleMinimum lot: 5,000 pcsMaterial: Rubber
Product name: Joint 1.,Use for: MotorcycleMinimum lot: 5,000 pcsMaterial: Rubber
Product name: Plate BottomUse for: MotorcycleMinimum lot: 5,000 pcsMaterial: Plastic
Product name: Duct Air/cUse for: MotorcycleMinimum lot: 5,000 pcsMaterial: Plastic
Product name: Rubber SealUse for: MotorcycleMinimum lot: 5,000 pcsMaterial: Rubber
Product name: O-ringUse for: MotorcycleMinimum lot: 5,000 pcsMaterial: Rubber
Company Profile
Contact Information
Leading of Rubber & Plastic parts
VN 29
97VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
SUNPLA JSC
Establishment year : 2012Number of Employees : 80Factory Address : Lot E1,E2, Dinh Tram Industrial Zone, Hoang Ninh, Viet Yen district, Bac Giang province.Factory space (m2) : 10,000Charter Capital (USD) : 400,000Turnover in 2014 (USD) : 379,311Main Technology : Plastics Injection & MoldMain Customers : Viettel , Framas, HikariQuality Certificates : ISO9001-2008 & ISO14001-2004Other information : N/A
Person in charge : Mr. NGUYEN DUC CUONGPosition : Sales DirectorAddress (Office) : Lot E1,E2, Dinh Tram Industrial Zone, Hoang Ninh, Viet Yen district, Bac Giang province.Tel : +84 - 240 3662 288Fax : +84 - 240 3662 266Email : [email protected] : http://www.sunpla.com.vn
Selling ItemsProduct name: Front coverUse for: Mobile PhoneMinimum lot: 500,000 pcsMaterial: Plastics
Product name: Midle coverUse for: Mobile phoneMinimum lot: 500,000 pcsMaterial: Plastics
Product name: Back coverUse for: Mobile phoneMinimum lot: 500,000 pcsMaterial: Plastics
Product name: Sim gateUse for: Mobile phoneMinimum lot: 500,000 pcsMaterial: Plastics
Company Profile
Contact Information
Product name: Case lowerUse for: Battery charge of Mobile phoneMinimum lot: 500,000 pcsMaterial: Plastics
Product name: GearsUse for: Water flow meterMinimum lot: 1,000,000 pcsMaterial: Plastics
VN 30
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
98
VIETNAMESE COMPANy
TAM PHAT ELECTRICAL ENGINEERING AND AUTOMATION JSC
Establishment year : 2014Number of Employees : 15Factory Address : Chuc Son Industrial zone, Chuong My District, Ha Noi, Viet NamFactory space (m2) : 500Charter Capital (USD) : 200,000Turnover in 2014 (USD) : N/AMain Technology : Electrical panel design-assembly & PLC software developmentMain Customers : Toto VN, Toyota boshoku HN, Denso VN, ToyoInk, Terumo,… other Japan companies in VNQuality Certificates : N/AOther information : We want to develop, and making bussiness with Japan and Korea companies in VN
Person in charge : Mr. LE HIEN TUANPosition : DirectorAddress (Office) : No 10, Ham Nghi Street, Nam Tu Liem District, Ha Noi, Viet NamTel : +84- 902 130 103Fax : +84- 989 578 698Email : [email protected] - [email protected] : http://www.tamphatjsc.com
Selling ItemsProduct name: Main control panelUse for: Control production line of factoryMinimum lot: 1 pcMaterial: electric devices, PLC system,etc..
Product name: Production boardUse for: To control and monitor productions process of lineMinimum lot: 1 pcMaterial: PLC system, PC and LCD monitor,..etc
Product name: AC servo control systemUse for: accurate cutting controlMinimum lot: 1 pcMaterial: : PLC system, HMI, AC servo,..etc
Product name: Inverter panelUse for: Control production line, conveyor,…Minimum lot: 1 pcMaterial: AC Inverter, electric devices, PLC system,etc..
Product name: Wasterwater treatment control systemUse for: control wastewater treatment system of the FactoryMinimum lot: 1 pcMaterial: electric devices, PLC system,etc..
Product name: Quality control systemUse for: to control product qualityMinimum lot: 1 pcMaterial: PLC system, PC and LCD monitor,..etc
Company Profile
Contact Information
We are specialized in providing automation solutions, system integration and assembly of electrical panels, engineering consultancy and project implementation in the field of automation, measurement & control. Our key engineering staffs have more than over 10 years of experience. The power of TAMPHAT.,JSC has been established based on the combination, careful selection, and development from the experience and knowledge by every members of the company.We are authorized distributor of OMRON, YASKAWA, MITSUBISHI ELECTRIC in the North of Viet Nam
VN 31
99VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
TAN PHAT AUTOMATION JSC
Establishment year : 2006Number of Employees : 83Factory Address : No.168, Phan Trong Tue Road, Thanh Tri Ward, Thanh Liet District, Hanoi, VietnamFactory space (m2) : 1,700 Charter Capital (USD) : 300,000Turnover in 2014 (USD) : 2,326,000Main Technology : Robotics, Vision and Assembly TechnologyMain Customers : Canon Vietnam; Denso Vietnam; Toyota Vietnam and etcQuality Certificates : ISO 9001-2008; CE; IEC 60335-1:2010; TCVN 5699-1:2010 Other information : N/A
Person in charge : Mr. NGUYEN TRONG THUONG Position : Vice Director Address (Office) : No.168, Phan Trong Tue Road, Thanh Tri Ward, Thanh Liet District, Hanoi, VietnamTel : +84 - 4-3685 7776 Fax : +84 - 4-3685 7775 Email : [email protected] Website : http://tanphat.com
Selling ItemsProduct name: 3D Scanner Use for: Metal, Plastic Minimum lot: 01 pcMaterial: NI software & Components
Product name: Autogas Charging Use for: Automotive & Home ApplianceMinimum lot: 01 pcMaterial: N/A
Product name: LED DisplayUse for: ElectronicsMinimum lot: 01 pcMaterial: N/A
Product name: Inspection by Vision Use for: Electronics, Metal, F&B Minimum lot: 01 pcMaterial: Camera and Sensor
Company Profile
Contact Information
Product name: Assembly LineUse for: Electronics, Metal, F&B Minimum lot: 01 pcMaterial: N/A
Product name: Thickness MeasuringUse for: Electronics, Metal, Plastic, RubberMinimum lot: 01 pcMaterial: N/A
VN 32
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
100
VIETNAMESE COMPANy
TECHNOKOM JSC
Establishment year : 2010Number of Employees : 248Factory Address : Tan Quang Industrial Park, Van Lam District, Hung Yen Province, vietnamFactory space (m2) : 3,500Charter Capital (USD) : 1,650,000Turnover in 2014 (USD) : 4,250,000Main Technology : Stamping,Welding and buffing.Main Customers : GTA, TS Viet Nam, VPIC, ICSN, ITPQuality Certificates : ISO 9001:2000Other information : TECHNOKOM JSC., specializes in manufacturing of motocycles, auto parts and machining parts. With our staff of high qualified personnel, experienced and equipped with advanced machines, TECHNOKOM has been a prestigious and reliable partner among the leading companies in automotive and motorcycles manufacturing in Viet Nam.
Person in charge : Mr. DINH XUAN SONPosition : DirectorAddress (Office) : Tan Quang Industrial Park, Van Lam District, Hung Yen Province, vietnamTel : +84 - 32 137 91750Fax : +84 - 32 137 91751Email : [email protected]/ [email protected] : http://www.technokom.com.vn
Selling ItemsProduct name: Plate A compUse for: Motocycles partsMinimum lot: 5,000 pcsMaterial: Steel
Product name: Stay muffler prottector.Use for: Motocycles partsMinimum lot: 5,000 pcsMaterial: Steel
Product name: Plate, L GuardUse for: Motocycles partsMinimum lot: 5,000 pcsMaterial: Steel
Product name: Separtor BUse for: Motocycles partsMinimum lot: 5,000 pcsMaterial: Steel
Product name: Stand comp main(K03).Use for: Motocycles partsMinimum lot: 5,000 pcsMaterial: Steel
Product name: Bracket Cab Mount Front.Use for: Auto partsMinimum lot: 5,000 pcsMaterial: Steel
Company Profile
Contact Information
VN 33
101VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
THINH HUNG CASTING JSC
Establishment year : 2000Number of Employees : 120Factory Address : My Dong industrial Zone, Thuy Nguyen District, Hai Phong province, VietnamFactory space (m2) : 4,500Charter Capital (USD) : 720,000Turnover in 2014 (USD) : 4,000,000 Main Technology : Casting IronMain Customers : PEGASUS VIETNAM SEWING MACHINE, KNC MARINE KOREA, Sena VietNam, TNHH Long Quang…Quality Certificates : ISO 9001-2008Other information : N/A
Person in charge : Mr. NGUYEN VAN THIENPosition : DirectorAddress (Office) : My Dong industrial Zone, Thuy Nguyen Dist., Hai Phong province, VietnamTel : + 84 - 313 645 664 ( +84 - 904 051 595)Fax : + 84 - 313 773 124Email : [email protected] [email protected] : http://ducthinhhung.com
Selling ItemsProduct name: Sewing machine body Use for: Sewing machineMinimum lot: 10,000 pcsMaterial: FC150 – cast iron
Product name: Over sewing machine bodyUse for: Over sewing machineMinimum lot: 10,000 pcsMaterial: FC150 – cast iron
Product name: Pump bodyUse for: Water Pump machineMinimum lot: 20,000 pcsMaterial: FC200 – cast iron
Product name: Valve bodyUse for: ValveMinimum lot: 10,000 pcsMaterial: FC200 – cast iron
Company Profile
Contact Information
We always do development for better satisfaction to client
Product name: AssybracketUse for: Car Minimum lot: 10,000 pcsMaterial: FC350 – cast iron
Product name: Machine partUse for: MachineMinimum lot: 10,000 pcsMaterial: FC200 – cast iron
VN 34
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
102
VIETNAMESE COMPANy
TRI CUONG INDUSTRIAL CO.,LTD
Establishment year : 2006Number of Employees : 130Factory Address : No.4, Lot 3, Lai Xa Industrial Zone, Hoai Duc district, Hanoi, VietnamFactory space (m2) : 2500 ( 1/2016 new factory: 6400m2)Charter Capital (USD) : 1,200,000Turnover in 2014 (USD) : 3,500,000Main Technology : custom machine & precision partsMain Customers : Yamaha, Meiko, Hamaden, SumitomoQuality Certificates : ISO 9001:2008 & ISO 14001: 2004Other information : N/A
Person in charge : Ms. LE THANH THUYPosition : DirectorAddress (Office) : No.4, Lot 3, Lai Xa Industrial Zone, Hoai Duc district, Hanoi, VietnamTel : +84 - 4 3366 4038Fax : +84 - 4 33664036Email : [email protected] / [email protected] Website : http://www.tci.vn
Selling ItemsProduct name: round partsUse for: AutomotiveMinimum lot: 1 pcMaterial: Steel
Product name: Assembly jigUse for: assembly plastic partMinimum lot: 1 pcMaterial: Aluminium, plastic
Product name: Auto Assembly machineUse for: Assembly retainerMinimum lot: 1 pcMaterial: Steel, Aluminium, plastic & standard parts
Product name: watch assembly lineUse for: assembly watchMinimum lot: 1 pcMaterial: Aluminium, plastic, steel
Product name: Wheel assembly machineUse for: AutomotiveMinimum lot: 1 pcMaterial: Steel, plastic & standard parts
Product name: integrated systemUse for: packingMinimum lot: 1 pcMaterial: Steel, Robot
Company Profile
Contact Information
VN 35
103VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
VIET AN JOINT STOCK COMPANy
Establishment year : 2008Number of Employees : 230Factory Address : Phung Industrial Zone, Dan Phuong District, Ha NoiFactory space (m2) : 4,400Charter Capital (USD) : 1,000,000Turnover in 2014 (USD) : 4,300,000Main Technology : Automatic wire cutting, stripping and stamping m/csMain Customers : Asti, Piaggio, Tenma, Toyodenso, Stanley, Sumi Viet Nam …Quality Certificates : ISO 9001:2008; ISO 14001:2004Other information : 5S, Kaizen
Person in charge : Ms. BUI THANH HANGPosition : Vice DirectorAddress (Office) : Phung Industrial Zone, Dan Phuong District, Hanoi, VietnamTel : 84 - 4 3363 5443/5/6Fax : 84 - 4 3363 5447Email : [email protected] : http://viet-an.vn
Selling ItemsProduct name: Wire harnessUse for: MotobikesMinimum lot: 100 pcsMaterial: Wire, housing, connector
Product name: Wire harnessUse for: Electronic household devices …Minimum lot: 100 pcsMaterial: Wire, housing, connector
Product name: PVC tubesUse for: Wire harness and other applications.Minimum lot: 100 pcsMaterial: PVC resin ….
Product name: Thermoforming trays Use for: Industrial containersMinimum lot: 1000 pcsMaterial: PP, PS, Pet, PVC
Company Profile
Contact Information
Product name: Danpla boxesUse for: Industrial containersMinimum lot: 100 pcsMaterial: Danpla sheets, corners, handles …
Product name: Pipe rackingUse for: Working tables, carriages…Minimum lot: 10 pcsMaterial: Coat pipes, metal joints, caster …
VN 36
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
104
VIETNAMESE COMPANy
VIET INDUSTRy GROUP JSC
Establishment year : 2005Number of Employees : 500Factory Address : Tan Quang Industrial Zone, Van Lam Dist, Hung Yen Province, Viet NamFactory space (m2) : 2,000Charter Capital (USD) : 8,500,000Turnover in 2014 (USD) : 8,203,973Main Technology : Consulting, design & manufacturing Automatic machine systems for productionMain Customers : Honda, Toyota, Yamaha, Ford, Vap, Goshi, Denso, Hal, Piaggio, …Quality Certificates : ISO 9001:2008Other information : N/A
Person in charge : Mr. LE THANH LUONGPosition : General DirectorAddress (Office) : No 801, Silver Wings Building, Nguyen Van Cu Street Long Bien District, Ha Noi, Viet NamTel : +84 - 4 2220 7918Fax : +84 - 4 2220 7919 Email : [email protected] : http://cnvgroup.com.vn/
Selling ItemsProduct name: Mechanical partUse for: Spare partsMinimum lot: 5 pcsMaterial: SKD, Cu….
Product name: JIG, holderUse for: AutomobileMinimum lot: 1 pcMaterial: Steel
Product name: Automatic machineUse for: Motorbike/AutomobileMinimum lot: 1 pcMaterial: Steel, Electrical..
Product name: ConveyorUse for: IndustrialMinimum lot: 1 pcMaterial: PVC, Roller, Rubber, Aluminum, Steel
Product name: Duct collectorUse for: IndustrialMinimum lot: 1 pcMaterial: Steel, PVC, ..
Product name: Paint, Handling, Welding, Polising RobotUse for: IndustrialMinimum lot: 1 pcMaterial: yaskawa, ABB
Company Profile
Contact Information
VN 37
105VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
VIET RAINBOW CO.,LTD
Establishment year : 2010Number of Employees : 40Factory Address : Lot A1, Dai Dong IP, Hoan Son, Tien Du district, Bac Ninh provinceFactory space (m2) : 3,000Charter Capital (USD) : 300,000Turnover in 2014 (USD) : 1,000,000Main Technology : Electro Static CoatingMain Customers : GE, KEINHING MURAMOTO, JAT, ARISTON, NISSIN ELECTRIC, SAMSUNG…Quality Certificates : ISO 9001:2008Other information : N/A
Person in charge : Mr. LE DUC LONGPosition : Managing DirectorAddress (Office) : Lot A1, Dai Dong IP, Hoan Son, Tien Du, Bac NinhTel : +84 - 2413 847 832Fax : +84 - 2413 847 834Email : [email protected] : http://www.vietrainbow.com
Selling ItemsProduct name: Electrical boxUse for: GE wind power projectsMinimum lot: 800m2/shift (8h)Material: Steel
Product name: FancoverUse for: Pump, motor Minimum lot: 800 pcs/hMaterial: Steel
Product name: Honda Motorbike PartsUse for: MotorbikeMinimum lot: 10,000 pcs/hMaterial: Steel
Product name: Terminal box caseUse for: Panasonic Minimum lot: 1,000 pcs/hMaterial: Galvanized steel
Company Profile
Contact Information
We can provide high, reliable and long lasting different kinds of coating on any kind of metal surfaces...
Product name: Metal sheetUse for: Ariston water heater Minimum lot: 360 pcs/hMaterial: Steel
Product name: Accessories lightUse for: mounted lightsMinimum lot: 100 pcs/hMaterial: Aluminium
VN 38
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
106
VIETNAMESE COMPANy
VIETNAM HTMP MECHANICAL CO.,LTD
Establishment year : 2006Number of Employees : 500Factory Address : Lot 43-D3, Quang Minh industrial park, Melinh District, Hanoi, VietnamFactory space (m2) : 12,000Charter Capital (USD) : 7,200,000Turnover in 2014 (USD) : 12,000,000Main Technology : Mold Manufacture & Plastic InjectionMain Customers : Honda, Nissin, Canon, Panasonic, Samsung, VAP, TsukubaQuality Certificates : ISO 9001:2008 & ISO 14001:2004Other information : N/A
Person in charge : Mr. NGUYEN HUU TUANPosition : General DirectorAddress (Factory) : Lot 43-D3, Quang Minh industrial park, Melinh District, Hanoi, VietnamTel : +84 - 4 3525 1113/14/15Fax : +84 - 4 3525 1112Email : [email protected] : http://www.htmp.com.vn
Selling ItemsProduct name: Aluminum Die Casting MoldUse for: MotobikeMinimum lot: N/AMaterial: Aluminum
Product name: Gravity Casting MoldsUse for: MotobikeMinimum lot: N/AMaterial: Metals
Product name: Plastic Injection MoldsUse for: Motobike, Office Machines, Electronics & civilMinimum lot: N/AMaterial: Plastic
Product name: Plastic Injection ProductsUse for: Telephone, Card swipe machineMinimum lot: N/AMaterial: Plastic
Product name: Plastic Injection ProductsUse for: Vacuum CleanerMinimum lot: N/AMaterial: Plastic
Product name: Plastic Injection ProductsUse for: PrinterMinimum lot: N/AMaterial: Plastic
Company Profile
Contact Information
Keep improving to create products with high competitiveness “Quality-Delivery-Cost” to meet with the customer’s need
VN 39
107VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
INTECH VIETNAM JSC
Establishment year : 2011Number of Employees : 68Factory Address : Lot A2, CN5, Tu Liem IZ, Minh Khai Com, Bac Tu Liem District, Hanoi, Viet NamFactory space (m2) : 1,000Charter Capital (USD) : 150,000Turnover in 2014 (USD) : 1,500,000Main Technology : Jig, Dies and Molds, Conveyor assemblyMain Customers : SamSung, YoKoWo, Pioneer, Panasonic,…Quality Certificates : ISO 9001:2008, 5SOther information : N/A
Person in charge : Mr. HUU THANG HOANG Position : General DirectorAddress (Office) : Lot A2, CN5, Tu Liem IZ, Minh Khai Com, Bac Tu Liem Dist, Hanoi, Viet NamTel : +84 - 46 680 6795Fax : +84 - 43 765 3875Email : [email protected] : http://intechvietnam.com
Selling ItemsProduct name: Supply of Dies and Molds.Use for: Automobile, Electronics /Electric parts.Minimum lot: 5,000 pcsMaterial: Aluminum,Steel,Sus
Product name: Supply of JigsUse for: Automobile, Electronics /Electric parts.Minimum lot: 5,000 pcsMaterial: Aluminum,Steel,Sus
Product name: Roller, Roller conveyors.Use for: Automobile, Electronics /Electric parts.Minimum lot: 10,000 pcsMaterial: Steel, Sus
Product name: Assembly lines systems, Automation systems.Use for: Automobile, Electronics /Electric parts.Minimum lot: 100 pcsMaterial: Aluminum,Steel,sus
Company Profile
Contact Information
Product name: Conveyors, Conveyors System.Use for: Electric partsMinimum lot: 500 pcsMaterial: Aluminum,Steel,sus
Product name: Aluminum profile, assembly components.Use for: Electronics/Electric parts.Minimum lot: 50 TonMaterial: Aluminum,Steel,sus
VN 40
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
108
VIETNAMESE COMPANy
VIETNAM PRECISION MECHANICAL, SERVICE AND TRADING CO.,LTD
Establishment year : 2006Number of Employees : 150Factory Address : Lot C6, Dong Tho Industrial Zone, Bac Ninh District, VietnamFactory space (m2) : 6,000Charter Capital (USD) : 500,000Turnover in 2014 (USD) : 6,065,660Main Technology : Plastic injection mold, Die casting mouldMain Customers : Honda, Yamaha, Nissin, Panasonic …Quality Certificates : ISO 9001:2008 Other information : N/A
Person in charge : Mr. NGUYEN XUAN HUY Position : Director Address (Office) : 69 Kim Hoa, Phuong Lien, Dong Da District, Ha NoiTel : +84 - 241 388 3920Fax : +84 - 241 388 3921Email : [email protected] : N/A
Selling ItemsProduct name: Injection Mold Use for: Refrigerator, Washing machines, MotorbikeMinimum lot: 10,000 pcsMaterial: Plastic
Product name: Die casting Mold Use for: Motorbike Minimum lot: 10,000 pcsMaterial: Aluminum
Product name: Press Mold Use for: Automobile Minimum lot: 1,000 pcsMaterial: Steel
Product name: Jig Use for: Check Product, Weding JigsMinimum lot: 100 pcsMaterial: Bakelit Resin
Product name: Fabricating assembly lineUse for: Assembly productMinimum lot: 10 pcsMaterial: Steel
Product name: Plastic Product Use for: MotorbikeMinimum lot: 1,000 pcsMaterial: Plastic
Company Profile
Contact Information
VN 41
109VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
VIETUC INDUSTRIAL AND COMMERCIAL JSC
Establishment year : 2002Number of Employees : 100Factory Address : Km12, 1A Highway, Van Dien Town, Thanh Tri District, Hanoi, VietnamFactory space (m2) : 1,200Charter Capital (USD) : 450,000Turnover in 2014 (USD) : 250,000Main Technology : MechanicalMain Customers : Fujipla, FKK, Fukoku, Rhythm, Sankyo, Osawa,…Quality Certificates : N/AOther information : N/A
Person in charge : Mr. TRINH BA NGOCPosition : DirectorAddress (Office) : Km12, 1A Highway, Van Dien Town, Thanh Tri District, Hanoi, VietnamTel : +84 - 4 36 814 158Fax : +84 - 4 36 814 158Email : [email protected] / [email protected] Website : http://cokhivietuc.com
Selling ItemsProduct name: Punching MoldUse for: Component productionMinimum lot: 10,000 pcsMaterial: Metal
Product name: Plastic MoldUse for: ProductionMinimum lot: 10,000 pcsMaterial: Metal, plastic
Product name: Casting MoldUse for: ProductionMinimum lot: 10,000 pcsMaterial: Metal
Product name: Blow MoldUse for: ProductionMinimum lot: 10,000 pcsMaterial: Metal
Company Profile
Contact Information
Product name: Casting products moldUse for: AssembleMinimum lot: 1,000 pcsMaterial: Metal
Product name: Plastic products moldUse for: ConsumesMinimum lot: 500 pcsMaterial: Plastic
VN 42
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
110
VIETNAMESE COMPANy
VISION INTERNATIONAL VIETNAM CO.,LTD
Establishment year : 2009Number of Employees : 60Factory Address : Lot 28, Quang Minh Industrial Zone, Me Linh District, Hanoi, VietnamFactory space (m2) : 1,836Charter Capital (USD) : 1,000,000 Turnover in 2014 (USD) : 865,000 Main Technology : Press / Anodizing / Surface treatment Main Customers : Japanese, Korea, Taiwan, VietnamQuality Certificates : ISO 9001- 2008 ,5SOther information : Manufacturing Metal Components for the following industries: Automotive, Air-Conditioning, Electrical and Electronic Appliances, Printer Parts, Contact Terminals.Single-Press Die / Progressive Press Die Design & Fabrication, Surface treatment, Heat treatment, Aluminum Anodizing etc.
Person in charge : Mr. NGUYEN QUANG VINH Position : General ManagerAddress (Office) : Lot 28, Quang Minh Industrial Zone, Me Linh District, Hanoi, VietnamTel : +84 - 4 - 35251477Fax : +84 - 4 - 3525 1479Email : [email protected] : http://www.vi-vision.com
Selling ItemsProduct name: Progressive Press Die Use for: Automotive PartMinimum lot: 1 setMaterial: SKD 11
Product name: Progressive Press Die Use for: Audio equipmentMinimum lot: 1 setMaterial: SKD 11
Product name: Progressive Press Die Use for: Mobile PhoneMinimum lot: 1 setMaterial: SKD 11
Product name: Assy partUse for: Automotive industry Minimum lot: 10,000 pcsMaterial: Copper, Carbon Steel, Stainless Steel etc.Thickness: 0.5 ~ 3.2 mm
Product name: HeatsinkUse for: A/V receivers, amplifier Minimum lot: 10,000 pcsMaterial: AluminumThickness: 0.5 ~ 6.0 mm
Product name: Antennas Use for: Mobile PhoneMinimum lot: 20,000 pcsMaterial: Stainless steel, coated steel Thickness: 0.15 ~ 0.3 mm
Company Profile
Contact Information
VISION INTERNATIONAL VIETNAM – ALWAYS BESIDE YOU
VN 43
111VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY
yAMAGUCHI VIETNAM JSC
Establishment year : 2011Number of Employees : 110Factory Address : Minh Hoa 2, Minh Khai Commune, Hoai Duc District, Hanoi, VietnamFactory space (m2) : 1,800Charter Capital (USD) : 250,000Turnover in 2014 (USD) : 1,500,000Main Technology : CNC cuttingMain Customers : Panasonic System Network Co.,Ltd; Toyota Vietnam Co.,Ltd, Fujikin Vietnam Co.,Ltd; Daiwa Vietnam Co.,Ltd;Quality Certificates : N/AOther information : N/A
Person in charge : Mr. DO XUAN MINHPosition : DirectorAddress (Office) : 7th Floor, A1 – 1, A2 – 2 Tower, Le Duc Tho street, My Dinh Commune, Tu Liem District, Ha Noi, Viet NamTel : +84 - 4 - 6684 4282Fax : +84 - 4 - 3734 9267Email : info@ yamaguchi.vnWebsite : http://www.yamaguchi.vn
Selling ItemsProduct name: Mold accessoriesUse for: MoldingMinimum lot: 1 pcMaterial: SKD61
Product name: Copper electrodeUse for: MoldingMinimum lot: 1 pcMaterial: Cu C1100
Product name: FixturesUse for: Support for fixturesMinimum lot: 1 pcMaterial: A6061
Product name: MoldsUse for: MoldingMinimum lot:1/setMaterial: S50C
Company Profile
Contact Information
Product name: Molds for foodUse for: MoldingMinimum lot:1 pcMaterial: A6061
Product name: PistonUse for: zinc molding machineMinimum lot: 1 pcMaterial: SKD 6
We provide high quality metal parts for various industrial applications. We are leading experts in precision metal processing.
VN 44
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
JAPAN INTERNATIONAL COOPERATION AGENCy
Since joining the Colombo Plan in 1954, Japan has been providing financial and technical assistance to developing countries through ODA, aiming to contribute to the peace and development of the international community and thereby help ensure Japan’s own security and prosperity.
Person in charge : Mr. TAKASHI MATSUSHITAPosition : Senior Project Formulation Advisor, Vietnam OfficeAddress (Office) : 11th Floor, CornerStone Building, 16 Phan Chu Trinh, Hanoi, VietnamTel : +84-4-3831 5005Fax : +84-4-3831 5009Email : [email protected] : http://www.jica.go.jp/vietnam/index.html
Contact Information
Organization Activities
Organization Profile
JICA is in charge of administering all Japanese ODA such as technical cooperation, ODAloans and grant aid in an integrated manner, except contributions to international organizations. JICA, the world’s largest bilateral aid agency, works in over 150 countries and regions and has some 100 overseas offices.President : Mr. Akihiko TanakaDate founded : October 1, 2003Capital : 7,832 billion yen as of March 31, 2014Staff : 1,845 as of March 31, 2015 They are supplemented at any one time by thousands of Japanese experts and young and senior volunteers on both short-term and long-term contracts.
1. Background of JICA’s activities for SME/SI development in VietnamThe development of Small and Medium Enterprises (SMEs) and Supporting Industries (SIs) is one of the essential issues for the achievement of promotion of economic growth and international competitiveness of Vietnam. As the Japanese largest ODA-implementing agency, JICA Vietnam office is strongly implementing various kinds of ODA activities for SME/SI development as follows.
2. JICA’s activities for SME/SI development in VietnamA) Industrial human resources development and establishment of skill testing system
Counterpart: MOLISA/ General Department of Vocational Training/ Hanoi University of Industry/ Industrial University of Ho Chi Minh City
Cooperation: Dispatching Japanese experts, providing training courses in Japan for staff, providing equipment
B) Lectures for Vietnamese companies on Japanese business management Counterparts: Vietnam Japan Human Resources Cooperation Centers Cooperation: Dispatching Japanese experts, providing business courses for Vietnamese companies C) Technical transfer to Vietnamese companies by Japanese engineers Counterpart: MPI/ The Assistance Center for SME Cooperation: Dispatching Japanese experts, providing consultation and advicesD) Improving Foreign Direct Investment policies and promoting the related environment Counterparts: MPI/ Foreign Investment Agency Cooperation: Dispatching Japanese experts
ORGANIZATION
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
ORGANIZATION
VIETNAM TRADE PROMOTION AGENCy (VIETRADE)
Address (Office) : 20 Ly Thuong Kiet Street, Hoan Kiem District, Hanoi City, VietnamTel : +84 - 4 - 3936 4792Fax : +84 - 4 - 3936 9491Email : [email protected] : http://www.vietrade.gov.vn
Contact Information
Organization Activities
Organization Profile
Devoted to: - Enterprises’ success- Trade & industry’s steady development- Optimization of every resource
The Vietnam Trade Promotion Agency (VIETRADE) is a governmental organization of Vietnam responsible for national regulation of trade and investment promotion for development of industry and trade.
VIETRADE provides a wide spectrum of services to assist Vietnamese and foreign enterprises in their business development and expansion.
- Proposing to the government on policies and measures for the development of business support activities, national branding programs, and investment for development of industry & trade
- Providing business information to trade support institutions and enterprises,- Conducting market research and analyses for the purpose of formulating national trade promotion policies,- Assisting Vietnamese and foreign enterprises to identify business opportunities, customers, suppliers and
partners through dispatching trade missions abroad, hosting foreign business missions to Vietnam, and organizing business meetings, seminars and conferences for Vietnamese and foreign enterprises,
- Regulating, in coordination with relevant authorities, all commercial advertising activities, sales promotion activities and trade fairs in Vietnam,
- Administering the National Branding Program; assisting Vietnamese enterprises in building, promoting and protecting their product brands,
- Administering, in coordination with relevant authorities, the National Trade Promotion Program,- Assisting and guiding local industry & trade departments, trade support institutions in Vietnam, and overseas
trade representative offices in trade promotion and in investment promotion for industry development,- Training Vietnamese enterprises and trade support institutions in trade promotion and in investment
promotion for industry development- Producing trade & industry television programs, and- Cooperating with international and foreign organizations in trade promotion and in investment promotion for
industry development.
VIETNAM - JAPANSUPPORTING INDUSTRIES EXHIBITION
ORGANIZATION
JAPAN EXTERNAL TRADE ORGANIZATION
Contact Information
Organization Activities
Organization Profile
JETRO Hanoi Office Address (Office) : Floor 2, 63 Ly Thai To Street, Hoan Kiem District, Hanoi City, VietnamTel : + 84-4-3825 0630 Fax : + 84-4-3825 0552 Email : [email protected]
Japan External Trade Organization is a Governmental-related Organization under the Ministry of Economy, Trade and Industry of Japan (METI). With 41 regional offices throughout Japan and 76 overseas offices in 57 countries in the world, JETRO’s main function is to promote mutual trade and investment between Japan and the rest of the world. In the 21st century, JETRO has shifted toward strengthening foreign direct investment (FDI) into Japan and helping Japanese firms, especially SMEs expand their businesses into overseas markets.
With the aim of contributing to further development of economic relations between Vietnam and Japan and to the achievement of the prosperity in the region, the Representative Office in Hanoi has been conducting and involving in many various activities that brought mutual benefits to entrepreneurs of the two countries since its establishment in 1993.
• Offer expert consultation with the latest legal writings and information relating to tax, customs, labor and investment procedures to Japanese investors who wish to invest or do business in Vietnam,
• Receive Japanese study missions to Vietnam for investment and business opportunities in Vietnam,
• Provide Japanese investors particularly SMEs with office space and facilities free of charge to promote their business and investment in Vietnam,
• Hold business matching between Japanese and Vietnamese enterprises in various fields,
• Organize an exhibition on supporting industries to match Japanese buyers with Vietnamese sellers,
• Hold workshops guiding new laws and regulations on Vietnam’s business and investment issues for existing Japanese enterprises who are operating in Vietnam,
• React to inquiries from local and Japanese companies seeking information about potential partners,
• Create business chances for Vietnamese importers by inviting them to visit specialized trade fairs and production bases in Japan in fields of foodstuff, beverage, agriculture and supporting industries,
• Make a comparative survey of investment-related costs in major cities in the region and in Asia every year,
• Conduct an annual survey of current operation of the Japanese-affiliated firms in Asia and Oceania.
JETRO Ho Chi Minh Office Address (Office) : Floor 14, Sun Wah Tower, 115 Nguyen Hue Street,District 1, Ho Chi Minh City, VietnamTel : + 84-8-3821 9363Fax : + 84-8-3821 9362Email : [email protected]
Website : http//:www.jetro.go.jp
JAPAN EXTERNAL TRADE ORGANIZATION (JETRO) HANOI REPRESENTATIVE OFFICE2nd Floor, 63 Ly Thai To Street, Hanoi, VietnamTel: (84-4) 3825 0630 Fax: (84-4) 3825 0552Email: [email protected]: www.jetro.go.jp
VIETNAM TRADE PROMOTION AGENCY (VIETRADE)Add: 20 Ly Thuong Kiet Street., Hanoi, VietnamTel: +84-8- 3934 1512Fax: + 84-8- 3934 4260 / 3934 8142Website: http://www.vietrade.gov.vn
Tran Hung Dao
Ly Thuong Kiet
Hang Khay
Trang Tien
Ly Thai To
Ly Thai To
Phan
Chu
Trin
h
Ngo
Quy
en
Ba T
rieu
Tran Hung Dao
Yet K
ieu
HOAN KIEMLAKE
MELIAHOTEL
METROPOLEHOTEL
HILTONOPERAHANOIHOTEL
63 Ly Thai To
20 LýThường Kiệt
CULTURAL PALACE