trouvay & cauvin (matériel divers pétrole) - chap08
TRANSCRIPT
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
1/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN
ROBINETTERIEINDUSTRIELLE
INDUSTRIALVALVES
robinet piston / piston valve ........................................ 596
clarinettes de traage vapeursteam tracing manifolds ................................................... 606
postes de purge compactscompact trap valve stations ............................................. 612
monobloc soudone-piece welded ................................................. 616
A
B
C
robinet tournant conique lubrifilubricated plug valve ........................................................ 638I
matelas isolantsinsulating blankets............................................................. 722S
appuis glissantsslide bearing pads............................................................. 726T
passage de cloisonswall penetration sealing.................................................... 729U
robinet papillon HPHP butterfly valve ............................................................. 642J
robinet membranediaphragm valve............................................................... 646K
robinet pointeauneedle valve ...................................................................... 650L
mesure et dtection de niveaulevel control and measurement ....................................... 656M
quipement de protection de rservoirstank protection equipment ............................................... 662N
purgeurs de condensatssteam traps........................................................................ 672O
filtres / strainers................................................................ 688P
D
ROBINETS
TOURNANTSPHRIQUE
BALLVALVES
2 pices sphre arbre2-piece trunnion mounted ................................. 624E
2 pices sphre flottante2-piece floating ball........................................... 628F
3 pices sphre arbre3-piece trunnion mounted ................................. 630G
monobloc top-entryone-piece top-entry ........................................... 632H
tresses et garniturespackings ................................................................ 694Q
TANCHIT
SEALING
PRODUCTS
joints / gaskets ..................................................... 700
R
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
2/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 597
A
596
A
robinet piston piston valve
PRINCIPE DE FONCTIONNEMENT / OPERATING PRINCIPLELe systme d'tanchit du robinet piston est origi-nal et se diffrencie totalement du systme d'tan-chit des robinets soupape et des robinets-vannes.L'obturateur n'est ni un clapet, ni un opercule, mais unpiston en acier inoxydable coulissant entre des ron-delles reprise lastique.
The piston valve has an original sealing system whichis completely different from that used in globe andgate valves.The closing device is neither a globe nor a plug but astainless steel piston which slides between elasticspring washers.
1 tanchit en ligneLa rondelle infrieure KXGT (graphite arm) assurel'tanchit en ligne, et joue le rle d'un sige souple.Contrairement au robinet soupape et au robinet-vanne, ltanchit est assure latralement sur toutela hauteur de la rondelle en contactavec le piston. Cette surface d'tan-chit est trs importante ; parexemple, pour un robinet piston deDN 25, elle est de 950 mm 2 pour unehauteur de 12 mm.
Les impurets invitables vhiculespar le fluide (limaille, particules derouille ou de calamine, perles de sou-dure, etc) peuvent gner la ferme-ture totale d'un robinet classique contact mtal/mtal ; par contre, onpeut toujours fermer un robinet pis-ton dont le piston nettoie lui-mme sonpassage la fermeture.
1 In-line sealing
The lower KXGT ring (re-inforced graphite) ensuresin-line tightness and functions as a soft seat.In contrast with globe and gate valves, lateral sealingis provided over the full thickness of the washer in
contact with the piston. The sealingarea is very large : 950 mm2 for a DN25 piston valve, with a washer thick-ness of 12 mm.The impurities which are inevitablyconveyed by the fluid (filings, rust or
scale particles, weld beads etc) mayprevent a conventional metal/metalvalve from closing completely. A pis-ton valve, however, always fullycloses since the piston cleans as itcloses.
VOLANTWHEEL
VOLANTWHEEL
TIGE/STEMTIGESTEM
PISTON
CHAPEAU
BONNETCHAPEAUBONNET
RONDELLE/RINGKXGT*
RONDELLE/RINGKXGT*
LANTERNELANTERN BUSH
CORPS/BODY
CORPS/BODY
RONDELLES RESSORTSPRING WASHERS
SOUPAPEVALVE
OPERCULE
PLUG
ROBINET PISTONPISTON VALVE
ROBINET SOUPAPEGLOBE VALVE
ROBINET-VANNEGATE VALVE
* sans amiante/asbestos free
ROBINET PISTON
PISTON VALVE
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
3/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
4/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 601600
A
robinet piston
TYPE STANDARD / STANDARD TYPE
piston valveA
robinet piston
TYPE PISTON QUILIBR / PRESSURE BALANCE TYPE
piston valve
Corps en acier moulCast steel body
Jupe sertieCrimped
protective cylinder
Tige/Stem
Rondelles-ressortSpring washers
Rondellegraphite arm
Re-inforcedgraphite ring
Rondelle de friction
Friction washer
Chapeauen acier forg
Forged steel bonnet
crou 2 pices2-piece nut
Piston en acier inoxSS piston
crou freinSplit nut
LanterneLantern bush
Joint PTFEPTFE ring
Rondelles-ressortSpring washers
Tige
Stem
crou de tigeStem nut
Cne guide-fluxFlow guidance cone
Corps en acier moulCast iron body
Rondelle graphite armRe-inforced graphite ring
Piston
Lanterne/Lantern bush
Palier /Bearing
Chapeau en acier moulCast steel bonnet
Rondelle de frictionFriction washer
crou 2 pices2-piece nut
Fouloir boulonnScrewed stuffing tamper
Rondellesgraphite arm
Re-inforced graphiterings
Rondelle de fondBottom ring
Rondelles-ressortSpring washers
Tige guide
Guide stem
Rondelle graphiteGraphite ring
Rondelle de pressionPressure ring
Rondellegraphite arm
Re-inforcedgraphite ring
crou fendupas gauche
Split nutanticlockwise
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
5/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 603
A
robinet piston piston valve
Jupe sertieCrimpedprotective cylinder
Tige / Stem
Rondelles-ressortSpring washers
Rondelle defrictionFriction washer
Chapeauen acier moulCast steel bonnet
Rondellegraphite armRe-inforcedgraphite ring
Rondelle dappuiSupport ring
LanterneLantern bush
Clapet / Plug
Rondelle graphite
Graphite ring
Sige / Seat
crou freinSplit nut
Joint / Ring
Goujons/crousStud bolts/nuts
crou 2 pices2-piece nut
Piston
Jonc / Ring
Rondellegraphite arm
Re-inforcedgraphite ring
Corps
en acier moulCast steel body
DOUBLE TANCHIT / DOUBLE SEALING
602
A
robinet pistondouble tanchit
SPCIFICITS / SPECIFIC FEATURES
double sealingpiston valve
Performances leves notamment tanchit en ligne et versl'extrieur sur vapeur sature ou mlange diphasique de
vapeur et de condensats jusqu' 42 bar.
gamme : ISO PN 40 et ISO PN 50
DN 15 DN 50 (1/2 2")
souder SW ou brides.
principe d'tanchit
Le robinet possde un double obturateur : une bague souplesur le piston et un clapet mtallique unique.La double tanchit en ligne est ainsi assure par le portagebague graphite/sige mtallique et le portage mtalliquecne/cne.
exploitation et entretienPour assurer une bonne longvit du robinet, il faut uneforce de compression suffisante en fin de fermeture, l'inverse du robinet piston ; en f in de fermeture, il faut
veiller serrer fermement le volant.Le robinet peut tre conditionn (mme mont sur laligne) de la mme manire qu'un robinet piston. Il suffit de changer les internesLes corps sont les mmes que ceuxdu robinet piston standard.
High performance in-line and external leaktightness parti-cularly with saturated steam or mixtures of steam andcondensate up to 42 bar.
range : ISO PN 40 and ISO PN 50
ND 15 to ND 50 (1/2 to 2"),
SW or flanged type.
sealing concept
Valve has a double closing device : a high temperatureresistant plastically deformable ring on the piston and asingle metal disc. Double in-line sealing is therefore obtai-ned by contact between the ring and the piston and bymetal cone-to-cone contact.
on-site use and maintenanceTo ensure long service life, sufficient torque mustbe applied until valve is completely closed ; unlike a stan-dard piston valve, the handwheel should be tightenedhard.
Valve can be renewed (even on line) like a standard pistonvalve. Simply replace the internals
The body is identical to a standard pistonvalve body.
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
6/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 605604
A
CONDITIONS DE SERVICE / SERVICE CONDITIONSacier au carbone / carbon steel
robinet piston piston valve
70
60
50
40
30
20
10
0 100 200 300 400 500
P bar
T C
70
60
50
40
30
20
10
0 100 200 300 400 500
P bar
T C
70
60
50
40
30
20
10
0 100 200 300 400 500
P bar
T C
ISO PN 20 / CLASS 150
ISO PN 40
ISO PN 50 / CLASS 300
Nota :Courbe de saturation de la vapeurSaturated steam curve
6
10
1520
25
32
40
50
A
GAMME / RANGEacier au carbone / carbon steel
robinet piston piston valve
Brides / Flanges NPT ou/or SW Brides / Flanges
Rating
Connection
Passage/Bore
DN NPS
1/4
3/8
1/23/4
1
1 1/4
1 1/2
2
Typestandar
d
Standardtyp
e
ISO PN 20CLASS 150
ISO PN 50CLASS 300
ISO PN 40
Rduit / Reduced Intgral / Full
65
80
100125
150
200
2 1/2
3
45
6
8Pistonqu
ilibr
Pressurebalance
Red.
KVN
KVN KVN
KVN KVN
KVN KVMs
KVN KVN KVMs
TCs TCs TCMs
TCMd
15
20
25
32
4050
1/2
3/4
1
1 1/4
1 1/22D
ou
bletanchit
Do
ublesealing
TCL
TCL
KVMNou/orKVSN
KVd
KVN
TCLM TCL
Nota 1 Tous les robinets de la srie KV sont disponibles sur demande en acier inoxydable (construction Xc).All valves of KV series are available in stainless steelon request (construction Xc).
Nota 2 Une gamme complte de robinets piston en fonte (construction II) est disponible en ISO PN 16.A complete range of piston valves in cast iron(construction II) is available in ISO PN 16.
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
7/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
8/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
9/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
10/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
11/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
12/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
13/68
DD
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
14/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN
Class 800
621
D
620
D
DNNPS
81/4
103/8
151/2
203/4
251
321 1/4
401 1/2
502
Taraud / Threaded
SW
BW avec manchettes /with nipples
brides / Flanged
Cryognique /Cryogenic
P.intgral / Full b.P. rduit / Reduced b.
X X XX
XX
XX
XX
XX
XX
P.intgral / Full b.P. rduit / Reduced b.
X X XX
XX
XX
XX
XX
XX
P.intgral / Full b.
P. rduit / Reduced b.
X X X
X
X
X
X
X
X
X
X
X
X
X
conception modulaire modular design
robinet tournant sphriquemonobloc
one-pieceball valve
RACCORDEMENTS / END CONNECTIONS
BTC
robinet tournant sphriquemonobloc
one-pieceball valve
GAMME DE DIAMTRES / SIZE RANGE
BTC
BRIDESFLANGES
NPT
BWavec manchettewith nipple
Raccordement symtrique ou mixte sur demandeMatching end connections or mixed upon request
Autres raccordements sur demandeOther end connections upon request
SW
P.intgral / Full b.P. rduit / Reduced b.
XX
XX
XX
XX
XX
XX
P.intgral / Full b.P. rduit / Reduced b.
XX
XX
XX
XX
XX X
Class 1500
Taraud / Threaded
SW
BW avec manchettes /with nipples
brides / Flanged
P.intgral / Full b.P. rduit / Reduced b.
X X XX
XX
XX
XX
XX X
P.intgral / Full b.P. rduit / Reduced b.
X X XX
XX
XX
XX
XX X
P.intgral / Full b.P. rduit / Reduced b.
X X X
X
X
X
X
X
X
X
X
X X
P.intgral / Full b.P. rduit / Reduced b.
XX
XX
XX
XX
XX X
Class 2500
Taraud / Threaded
SW
BW
P.intgral / Full b.P. rduit / Reduced b.
X X XX
XX X
P.intgral / Full b.P. rduit / Reduced b.
X X XX
XX X
P.intgral / Full b.P. rduit / Reduced b.
X X XX
XX X
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
15/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
16/68
EE
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
17/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 627
E
626
E
normes applicables applicable standards
pression temprature / pressure temperature
Conception gnrale
Produit
Encombrement
Essais dtanchit
Scurit feu, certification suivant :
Design
Product
Face-to-face
Testing leaktightness
Fire safe, certified according to :
ASME B 16.34 API 6D
API 6D API 598 BS 6755
BS 6755 part 2 API 607
BS 2080 ASME B 16.10 API 6D
API 608 BS 5351
Brides Flanges ASME B 16.5
Boulonnerie Bolting ASME B 16.34
Marquage Marking MSS SP-25
Contrles non destructifs :Contrle visuel Identification positive des
matriauxSur demande spcifique, suivant :
radiographie magntoscope ressuage
Non destructive examination :
Visual inspection
Positive materialsidentification (PMI)
On request, according to : radiography procedure magnetic particle examination dye penetrant examination
MSS SP-55
ASME B 16.34 par 8.3 special class valve appendix B appendix C appendix D
robinet tournant sphriquedeux pices
two-pieceball valve
GAMME DE DIAMTRES / SIZE RANGE
CONSTRUCTION
SMA
robinet tournant sphriquedeux pices
two-pieceball valve
SPECIFICATIONS
SMA
Passage intgral / Full bore
NPS Class 150 Class 300 Class 600
2
3
4
6
8
10
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Passage rduit / Reduced bore
2 x 1 1/2
3 x 2
4 x 3
6 x 4
8 x 6
10 x 812 x 10
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
corps et contre-bride acier au carbone, acier basse temprature, acier inoxydable, autres sur demande,
sphre acier inoxydable (ou acier au carbone chrom pour NPS 6).
lments dtanchit joint de sige : PTFE charg verre, anneaux garniture : graphite expans, bagues dtanchit : fluorocarbone.
construction NACE MR 01-75 sur demande.
body and adaptor carbon steel, low temperature steel, stainless steel, others upon request,
ball stainless steel (or chrome plated carbon steel for NPS
6).
sealing elements seat seal : glass filled PFTE, packing rings : expanded graphite, Orings : fluorocarbon.
construction NACE MR 01-75 upon request.
Courbes dutilisation pression/temprature selon ASME B 16.34/standard class, pour des robinets en acier au carbonequips de joints PTFE charg verre.Pressure/temperature service diagrams according to ASME B 16.34/standard class, for carbon steel valves fitted withglass filled PTFE seals.
20 40 60 80 100 120 140 160 180 200 220 240 260
120
110
100
90
80
70
60
50
40
30
20
10
0
0-29 -20 C
PRESSION /PRESSURE(bar)
PTFE CHARG VERRE /GLASS FILLED PTFE
Class 600 / ISO PN 100
Class 300 / ISO PN 50
Class 150 / ISO PN 20
FF
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
18/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 629
F
628
F
2-PIECES
SPLIT BODY
ROBINET TOURNANT SPHRIQUE
BALL VALVE
SMF
SPHRE FLOTTANTE / FLOATING BALL
robinet tournant sphriquedeux pices
two-pieceball valve
SMF
conception
Split body : 2-pices/assemblage boulonn. Sphre flottante. Scurit feu (API 607, BS 6755 part 2).
gamme construction Corps : acier au carbone ou acier inoxydable. Internes : acier inoxydable 316.
Joint de corps : spiral (graphite + 316). Autres lments dtanchit : GRTFE (charg verre).
raccordement Brides.
diamtres
concept
Split body : 2-piece/bolted assembly. Floating ball. Fire safe (API 607, BS 6755 part 2).
range
construction Body : carbon steel or stainless steel. Trim : stainless steel 316.
Body gasket : spiral wound (graphite + 316). Other sealing elements : GRTFE (glass filled).
end connections Flanges
sizes
SPECIFICATIONS
passage intgral / full bore1/2/to8
passage rduit /reduced bore2/to8
GG
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
19/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 631630
3-PIECESLicensed under
API 6 D
ROBINET TOURNANT SPHRIQUE
BALL VALVE
BSF
SPHRE ARBRE / TRUNNION MOUNTED
robinet tournant sphriquetrois pices
three-pieceball valve
BSF
conception 3-pices/assemblage boulonn (sauf 2 4 : construc-
tion 2 pices). Sphre arbre. Scurit feu (API 607, API 6FA). gamme construction Corps : acier au carbone. Internes : acier au carbone ou acier inoxydable. Siges : Nylon SMX ou PEEK. Joints toriques : Viton A raccordement Brides ou BW. diamtres
concept 3-piece/bolted assembly (except 2 to 4 : 2-piece
construction). Trunnion mounted. Fire safe (API 607, API 6FA).
range construction Body : carbon steel. Trim : carbon steel or stainless steel. Seats : Nylon SMX or PEEK. Orings : Viton A end connections Flanges or BW sizes
SPECIFICATIONS
NPSClass 150ISO PN 20
Class 300ISO PN 50
Class 600ISO PN 100
Class 900ISO PN 150
Class 1500ISO PN 250
Class 2500ISO PN 420
23468
10121416182022242628303234364042
2 x 1 1/23 x 24 x 36 x 48 x 6
10 x 812 x 1014 x 1014 x 1216 x 1216 x 1418 x 1620 x 1620 x 1824 x 2030 x 2436 x 30
Passage
intgral/Fullbore
Passagerduit/Red
ucedbore
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
20/68
HH
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
21/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 635634
robinet tournant sphriquetop entry
top entryball valve
RSA
diamtres sizes
gamme complmentaire complementary range
GAMME / RANGE
robinet tournant sphriquetop entry
top entryball valve
RSASPECIFICATIONS
NPSClass 150ISO PN 20
Class 300ISO PN 50
Class 600ISO PN 100
Class 900ISO PN 150
Class 1500ISO PN 250
Class 2500ISO PN 420
23468
101214
161820243036
2 x 1 1/23 x 24 x 36 x 48 x 6
10 x 812 x 1014 x 1216 x 1418 x 1620 x 1620 x 1824 x 2030 x 2436 x 30
Passageintgral/Fullbore
Passagerduit/Reducedbore
Sphre flottante / Floating ball Sphre arbre / Trunnion mounted
Robinet multivoiesMultiway valve
Robinet enveloppede rchauffage
Jacketed valve
construction corps acier au carbone, acier basse temprature, acier inoxydable, autres sur demande, sphre acier inoxydable (ou acier au carbone chrom pour
NPS 6). lments dtanchit joint de sige : PTFE charg ou PEEK, anneaux garniture : graphite expans, bagues dtanchit : fluorocarbone.
construction NACE MR 01-75 sur demande. raccordement Brides ou BW.
construction body carbon steel, low temperature steel, stainless steel, others upon request, ball stainless steel (or chrome plated carbon steel for
NPS 6). sealing elements seat seal : filled PFTE or PEEK, packing rings : expanded graphite, Orings : fluorocarbon.
construction NACE MR 01-75 upon request. end connections Flanges or BW
normes applicables applicable standards
Conception gnrale
Produit
Encombrement
Essais dtanchit
Scurit feu, certification suivant :
Design
Product
Face-to-face
Testing leaktightness
Fire safe, certified according to :
ASME B 16.34 API 6D
API 6D API 598
BS 6755 part 2 API 607
ASME B 16.10
BS 5351 API 608 MSS SP-72
Brides / Embouts BW Flanges / BW ends ASME B 16.5 / ASME B 16.25
Boulonnerie Bolting ASME B 16.34
Marquage Marking MSS SP-25
Contrles non destructifs :Contrle visuel Identification positive des
matriauxSur demande spcifique, suivant :
radiographie magntoscope ressuage
Non destructive examination :
Visual inspection
Positive materialsidentification (PMI)
On request, according to : radiography procedure magnetic particle examination dye penetrant examination
MSS SP-55
ASME B 16.34 par 8.3 special class valve appendix B appendix C appendix D
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
22/68
II
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
23/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 639638
ROBINET TOURNANT CONIQUE LUBRIFI
LUBRICATED PLUG VALVE
RIV
tanchit en ligne Contact mtal/mtal + film de lubrifiant (*). Intervention possible de l'extrieur :
ajustage du tournant, recomposition du film de graisse. bride de fond fixe par boulonnerie ;tanchit corps/bride de fond assure par : 2 diaphragmes mtalliques, 1 joint mtallique ondul encastr. tanchit tige Presse-toupe garnitures resserrables (*).Joint d'tanchit extrieur. Rondelle de frottement. tige de manuvre Anti-jection. Dsolidarise du tournant. tournant conique invers Position ajustable. Tournant quilibr. Traitement de durcissement (cmentation, trempe) et pro-
tection base de bisulfure de molybdne (SAFETURN). Faible couple de manuvre. lubrification La lubrification, effectue par injection (*) pleine pres-
sion de service ou l'arrt, assure une dure de vieexceptionnelle.
in-line sealing Metal-to-metal contact + film of lubricant (*). Maintenance can be carried out from outside :
adjustment of plug, renewal of lubricant.
base coverconnected to body by bolts ;Base cover/body sealing by : 2 metal diaphragmes, 1 corrugated metal gasket, embedded.
stem sealing Stuffing box with renewable packing (*). External gasket. Friction washer.
stem Anti-blow-out. Not integral with the plug.
inverted plug Adjustable position. Pressure balanced. Hardened (by cementation, and tempered) and with a
molybdenum disulfide based protective coating (SAFE-TURN).
Low operating torque.
lubrication Valves can be lubricated by packing injection (*) at full
working pressure or during shut-down, and will provideremarkably long service life.
(*) Caractristiques concourant la scurit feu (*) Fire safefeatures
robinet tournant conique lubrifi
lubricatedplug valve
RIVCARACTRISTIQUES GNRALES / GENERAL FEATURES
GAMME / RANGE
BOISSEAU INVERS / INVERTED PLUG
NPSClass 150ISO PN 20
2 voies / 2-ways 3 voies / 3-waysClass 300ISO PN 50
Class 600ISO PN 100
Class 900ISO PN 150
Class 1500ISO PN 250
Class 2500ISO PN 420
Class 150ISO PN 20
Class 300ISO PN 50
Class 300ISO PN 50
22 1/2
3468
101214161820243036
enveloppe
de
rchauffage
jacketed
valves
Autres diamtres sur demande Other sizes upon request
Licensed underAPI 6 D
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
24/68
JJ
bi ill h h f
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
25/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 643642
ROBINET PAPILLON HAUTEPERFORMANCE
BUTTERFLY VALVEHIGHPERFORMANCE
DL
DOUBLE EXCENTRATION / DOUBLE OFFSET
robinet papillonhaute performance
high performancebutterfly valve
DLCARACTRISTIQUES GNRALES / GENERAL FEATURES
scurit feu / fire safetige anti-jection / anti-blowout stemconception modulaire / modular designcol long / extended valve neckcompact / compacttanchit dynamique bi-directionnelledynamic bi-directional sealing
double tanchit vers lextrieurdouble external sealing
maintenance facile / easy maintenance
papillon profil, double excentrationstreamlined disc, double offset
stem offset
stem offset
valvecenter line
excentrationde tige
excentrationde tige
axe de
la vanne
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
26/68
KK
bi t b di h l
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
27/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 647646
ROBINET MEMBRANE
DIAPHRAGM VALVE
CORPS MTAL / METAL BODY
TCKV
robinet membrane diaphragm valve
TCKVCONCEPT
pour fluides peu chargs en particules solides / for fluids with low solid particles content
TYPE W : passage seuil / weir type
pour fluides chargs et/ou visqueux / for fluids carrying particles and/or high viscosity medianettoyage interne possible par tige, brosse ou racleur / possible internal cleaning by rodding, brushing or pigging
TYPE ST : passage droit / straight type
dimensionsSelon / according to: BS 5156, MSS-SP 88, DIN 3202 F.1, NFE 29305
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
28/68
LL
robinet pointeau high pressure
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
29/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 651650
ROBINET POINTEAU
NEEDLE VALVE
HAUTE PRESSION / HIGH PRESSURE
robinet pointeauhaute pression
high pressureneedle valve
CARACTRISTIQUES GNRALES / GENERAL FEATURES
Poigne de manuvre en T(volant en option)Tee bar handle(handwheel optional)
Capuchon pare-poussireDust protection cap
crou de blocage
Lock nut
Chapeau filet rouls,(tanchit mtal-mtal entre
corps et chapeau, double parun joint en PTFE ou Viton)
Seal housing with rolled threads(metal-to-metal sealing at body
interface, with PTFE or Vitondouble seal)
Corps(un marquage
assure lidentification et latraabilit du robinet)
Body(stamped material trace
code for identificationand traceability)
Goupille de blocagedu chapeau
Locking pin
Clapet mobileNon-rotating spindle spin
Fouloir avec crou de blocageAdjustable gland pusher
Tige de manuvre filetsextrieurs roulsActuating spindle withrolled threads
Garniture en PTFEou graphite purPTFE or grafoilgland seal bush
Rondelle dappui de garniture :(plus la pression dans le robinet estleve, plus la garniture est comprime,plus le robinet est tanche)Dynamic piston ring :(the higher the pressure, the higher theseal, thanks to automaticaladjustement of gland seal capability)
LL
robinet pointeau high pressure robinet pointeau high pressure
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
30/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 653652
robinet pointeauhaute pression
high pressureneedle valve
ROBINET DARRT 2 VOIES / 2-WAY HAND VALVE
robinet pointeauhaute pression
high pressureneedle valve
ROBINET DE MANOMTRE / GAUGE VALVE
Classe 6000 CWP(sur demande : 10.000 CWP)Temprature maxi : 240 CPression maxi : 400 bar
Rating 6000 psi(10,000 psi on request)
Maximum temperature : 240 C
Maximum pressure : 400 bar
TYPE FNPS 1/4 /to1
TYPE G 12 FNPS 1/2
(3/4 sur demande/on request)
TYPE G 12 MNPS 1/2
(3/4 sur demande/on request)
TYPE MNPS 1/4 /to1
Class 6000 CWP(sur demande : 10.000 CWP)Temprature maxi : 240 CPression maxi : 400 bar
Rating 6000 psi(10,000 psi on request)
Maximum temperature : 240 C
Maximum pressure : 400 bar
LL
robinet pointeau high pressure robinetterie modulaire compact
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
31/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 655654
robinet pointeauhaute pression
high pressureneedle valve
MANIFOLD 3 VOIES / 3-WAY MANIFOLD
robinetterie modulairecompacte
compactmodular valves
DOUBLE BLOCK & BLEED
DOUBLE BLOCK INJECTIONCHANTILLONNAGE / SAMPLINGTemprature maxi : 240 CPression maxi : 400 bar
Maximum temperature : 240 C
Maximum pressure : 400 bar
T 33Montage directDirect mounting(flange to pipe)
Y33Montage distanceRemote mounting
Y34Montage directDirect mounting(flange to pipe)
Y35 conception originaleRobinetterie de tuyauterie et d'instrumentation en un seulensemble.avantages tendue de la gamme de matriaux de construction, des
dimensions/classes des brides, et des diamtres dextr-mits taraudes.
Bride forge intgrale. Encombrement et poids rduits. L'limination de plusieurs points de fuite possibles am-
liore la scurit de l'installation. Installation simplifie. Les contraintes appliques la tuyauterie dues aux
efforts de flexion sont minimises, grce la lgret del'appareil.
Livraison rapide grce au format modulaire. Des modles tournant sphrique et pointeau sont dis-
ponibles dans de nombreuses configurations. Scurit feu selon BS 6755 part 2, API 607 et API 6 FA. Agrment produit : Lloyds n 88/0345 et 91/0117. La version tournant sphrique permet l'utilisation de
tringles de nettoyage.
unique conceptPiping and instrument valve in a single assembly.
advantages Wide range of materials, flange sizes, flange ratings,
screwed connection sizes. Forged integral flange. Space saving and limited weight. Elimination of several leak points, giving safer hook-up. Installation is facilitated. Lightweight, minimising bending momentum induced,
and pipework stresses.
Modular format allows fast deliveries. Ball valve and needle valve formats are available in awide range of configurations.
Fire-safe to BS 6755 part 2, API 607 and API 6 FA. Product type approval : Lloyds 88/0345 and 91/0117. Ball valve versions are rodable.
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
32/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
33/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
34/68
N N
quipementd
tank
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
35/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN662 663
QUIPEMENT DE PROTECTIONDE RSERVOIRS
TANK PROTECTION EQUIPMENT
ARRTE-FLAMMES / FLAME ARRESTORS conceptionDispositifs statiques de protection de rservoirs ou tuyau-teries contre le feu, ces appareils sont conus pour viterla propagation d'une flamme entre deux espaces gazeuxpar division et refroidissement de la flamme.
designProtection device against fire used on tanks and gas lines,flame arrestors are designed to prevent the propagation offlames between two gaseous spaces. They reduce theflame temperature and divide the flame into small streams.
applications rservoirs de stockage contenant des liquides volatiles et
inflammables tuyauterie reliant deux rservoirs torchres.
typical applications
tanks containing volatile and flamable liquids process lines flares.
q pde protectionde rservoirs
protectionequipment
2 types dlments2 types of elements
Toile inox en couches superposesS.S. wire mesh in multiple layers
Ruban gaufr inoxS.S. corrugated sheet
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
36/68
NN
quipementd i
tanki
quipementd i
tanki
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
37/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 667666
standard range
MB SV LE
X
X
X
1/8 /to1 1/2
inox/stainless steel
mcano-soud/ fabricated
X
X
3/8 /to2
inox/stainless steel
X
X
1/2 /to3
Type of equipment
Construction
Detonation
Deflagration
INSTALLATION
in-line
end of line
DN
NPS
END CONNECTIONS
flanged
threaded
compression fitting(s)
ELEMENT
corrugated sheet
wire-mesh
siphon type
BODY
carbon steel
stainless steel
aluminium alloy
gamme standard
Type dappareil CE FE FE
C
onstruction
X
X
15 /to200
inox/stainless steel
mcano-soud/ fabricated
X X
X
15 /to500
X
15 /to500
inox/stainless steel
inox/stainless steel
mcano-soud/ fabricated
mcano-soud/ fabricated
Anti-dtonant
Anti-dflagrant
MONTAGE
en ligne
bout de ligne
DN
NPS
RACCORDEMENT
par bride(s)
taraud
raccord(s) compression
LMENT
ruban gaufr
toile mtallique
type siphon
CORPS
acier au carbone
acier inoxydable
alliage daluminium
ARRTE-FLAMMES / FLAME ARRESTORS ARRTE-FLAMMES / FLAME ARRESTORS
de protectionde rservoirs
protectionequipment
de protectionde rservoirs
protectionequipment
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
38/68
NN
quipementd t ti
tankt ti
quipementd t ti
tankt ti
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
39/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 671670
Diamtres : DN 50 300
Tarage : 40 + 40 mbar
Construction : Acier au carbone, acier inoxydable(304 ou 316), ou aluminium.
Raccordement bride : ISO PN 10, class 150, autressur demande.
Sizes :2" to 12"
Settings : 40 to + 40 mbar
Construction :Carbon steel, stainless steel (304 or316), or aluminium.
Connection flange :flange ISO PN 10, class 150,others upon request.
de protectionde rservoirs
protectionequipment
SOUPAPES DE RESPIRATION / BREATHER VALVES
TYPE R 101
23
4
6
8
10
12
2 ou/or33 ou/or4
4 ou/or6
8
10
10
12avec sortie canalise / with pipe-away
Size Sortie / Outlet
TYPE R 111
Diamtres : DN 25 300
Tarage : + 40 mbar maxi
Construction : Acier au carbone, acier inoxydable(304 ou 316), ou aluminium.
Raccordement bride : ISO PN 10, class 150, autressur demande.
Sizes :1" to 12"
Settings :+ 40 mbar maxi
Construction :Carbon steel, stainless steel (304 or316), or aluminium.
Connection flange :flange ISO PN 10, class 150,others upon request.
SOUPAPES BASSE PRESSION / PRESSURE RELIEF VALVES
TYPE R 9
11 1/223468
1012
111/22 ou/or33 ou/or44 ou/or6
8101012
Size Sortie / Outlet
TYPE R 121
avec sortie canalise / with pipe-away
de protectionde rservoirs
protectionequipment
Diamtres : DN 50 300Tarage : 40 mbar maxiConstruction : acier au carbone, acier inoxydable(304 ou 316), ou aluminium.Raccordement bride : ISO PN 10, class 150, autressur demande.
Sizes :2" to 12"
Settings : 40 mbar maxi
Construction :carbon steel, stainless steel (304 or316), or aluminium.
Connection flange :flange ISO PN 10, class 150,
others upon request.
SOUPAPES CASSE-VIDE / VACUUM RELIEF VALVES
TYPE R 102
Diamtres : DN 400 600Tarage : + 10 + 50 mbarConstruction : acier au carbone, acier inoxydable(304 ou 316).Raccordement bride : ISO PN 10, class 150, autres
sur demande.Sizes :16" to 24"
Settings :+ 10 to + 50 mbar
Construction :carbon steel, stainless steel (304 or316).
Connection flange :flange ISO PN 10, class 150,others upon request.
VENTS DURGENCE / EMERGENCY VENT VALVES
TYPE R 128
vents libresTampons de jauge
Free vents
Gauge hatches
GAMME COMPLMENTAIRE / COMPLEMENTARY RANGE
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
40/68
O
purgeurs flotteurinvers ouvert FIO
O
inverted bucketsteam traps
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
41/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN
304 L / Z2 CN 18.10
304 L / Z2 CN 18.10
304 L / Z2 CN 18.10
304 L / Z2 CN 18.10
304 L / Z2 CN 18.10
304 L / Z2 CN 18.10
304 L / Z2 CN 18.10
304 L / Z2 CN 18.10
304 L / Z2 CN 18.10
1010
1011
1022
1013
1810
1811
1822
2010
2011
674
invers ouvert FIO
Series Typecoulement
FlowRaccordement
ConnectionMatire du corpsBody material
(*) Brides / Flanges : acier au carbone / carbon steelLV : vent agrandi / large ventTV : vent thermique / thermic bucket vent(maxi : 17 bar)CV : clapet anti-retour / check valveSW : dcrasseur / scrubing wireTA : contrle local / trap alertTS : contrle distance / trap scan
TaraudScrewed
Emmanch soudSocket weld
Brides (*)Flanged (*)
TaraudScrewed
Emmanch soudSocket weld
Brides (*)Flanged (*)
TaraudScrewed
Brides(*)Flanged (*)
Emmanch soudSocket weld
SRIES 1000 1800 2000 ACIER INOXYDABLE
ConnecteurConnector
ConnecteurConnector
ConnecteurConnector
Vertical
1000
304
1800
2000
Horizontal
360
675
steam traps
PMAbar
P maxibar
TMAC Options
DN / NPS
15 1/2 20 3/4 25 1
Insu pak : coquille disolation / insulation shellPop drain : protection anti-gel / protection against freeze upDrain : purge 1/2 avec bouchon / 1/2 drain with plug
Pour les condensats corrosifs, clapet/sige en inox 316 / for corrosive condensate, valve/seat in 316 stainless steelCertaines combinaisons doptions ne sont pas ralisables : nous consulter / some options combinations are not feasible :please consult us.
SERIES 1000 1800 2000 STAINLESS STEEL
28
28
45
31
28
28
45
28
28
427
427
316
427
427
427
316
427
427
10
28
45
31
14
28
45
14
28
CV SW LV TV
CV SW LV TV
CV SW LV TV
CV SW LV TV
SW Insu pak LV
SW Insu pak LV
SW Insu pak LVPop drain TA TS
Drain
SW Insu pak LVPop drain TA TS
Drain
SW Insu pak LVPop drain TA TS
Drain
28 427 28
b
b
b
b
b
b
b
b
b
b
b
b
b
b
b
b
b
b
Selon connecteurAccording to connector
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
42/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
43/68
OO
purgeurs flotteurinvers ouvert FIO
inverted bucketsteam traps
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
44/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN
PMA bar
681680
(*) Sur demande : acier inoxydable / On request : stainless steel
C
C1
A1
B
A
Corps / Body
Internes / Internals
Clapet sige / Valve seat
Acier inoxydable/ Stainless steel
Acier inoxydable/ Stainless steel
Acier au chrome durci/ Hardened chromium steel
Acier carbone / Carbon steel*
Z2 CN 18.10 / 304 L
304
440 F
Brides du connecteurConnector flanges
Type A1 C1B
Brides/Flanged
Brides/Flanged
A1 : Dimensions face--face des brides PN 40 selon DINFace-to-face dimensions DIN flanges PN 40
Taraud/Screwed
Taraud/Screwed
Emmanch soud/Socket weld
Emmanch soud/Socket weld
152025
1/23/41/23/415
20251/23/41/23/4
150150160
150
150160
60606060
60606060
3,64,24,71,91,91,91,93,7
4,34,72,02,02,02,0
117117117117117117117142
142142142142142142
154154154
154
154154
116116116116
116116116116
2010
2011
RaccordementConnection
TailleSize
MasseWeight
kg
DimensionsmmCA
optionsLV : vent agrandi / large ventSW : dcrasseur / scrubing wireInsu pak : isolation / insulation
raccordement / connectionTaraud / Screwed(NPT)
Emmanch soud / Socket weld brides / Flanged(NF/DIN/ASME)
matires / materials
dimensions masses / dimensions weights
28 28
Type 2010 2011
Type Taille de lorifice/Orifice size (n/64)
10
5/32
8
1/8
7
7/64
6
# 38
5
5/64
3,5
5
8
8,5
10,5
14
14
17 28
2010
2011
spcification techniquePurgeur de condensats de vapeur deau.
Montage : en toute position sur connecteur, PPC, TVS ouclarinettes.Garantie : 3 ans.
technical specificationSteam condensate trap.Installation : in any position on connector, PPC, TVS ormanifolds.3 years guarantee.
0,3 0,5 1Pression diffrentielle /Differential pressure (bar)
2 3 5 7 10 20 30
400
Db
it/Capacity(kg/h)
300
200
250
150
100
70
50
#387
/64
1/8
5/32
0,3 0,5 1 2 3 5 7 10 20 30
Exemple/
Example340 kg/h
Pression diffrentielle 4 bar /4 bar differential pressure
400
Db
it/Capacity(kg/h)
300
200
250
150
100
70
50
1/8
5/32
7/64
#38
5/64
Pression diffrentielle /Differential pressure (bar)
SRIE 2000 ACIER INOXYDABLE
pSERIES 2000 STAINLESS STEEL
pression maximale admissible bar, 427 Cmaximum admissible pressure bar, at 427 C
pression diffrentielle maximale admissible barmaximum admissible differential pressure bar
dbit dvacuation des condensats temprature de saturation discharge capacity of condensate at saturation temperature
Type 2011Type 2010
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
45/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
46/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
47/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
48/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
49/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
50/68
QQ
tresses et garnitures packings
TRESSES ET GARNITURESTRESSES ET GARNITURES
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
51/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN
Expandedgraphite
Armat./FrameInconel
+ corrosioninhibitor
PTFE+ graphite
PTFE
PTFE+ lubricant
695694
PACKINGSPACKINGS
Type
Fil / Thread
Impregnation
54 S 3222 W 3222 49 4333 54 H 4311
tresses de base basic packings
autres tresses other packings
PTFE
PTFE
Expandedgraphite
Polyimid
PTFE+ lubricant
PTFE+ aramid
PTFE+ lubricant
Graphite
Aramid
PTFE+ lubricant
Verre/glass
Graphite+ lubricant
Type
Fil / Thread
Impregnation
4313 35 (R) 4330 25 10 4310
PTFE+ graphite
Phenolic
PTFE+ lubricant
Acrylic
PTFE+ lubricant
(R) Avec tresse de soutien en tte et fond de presse-toupe, partir de 100 bar / With support packing at top andbottom of stuffing box, above 100 bar.
GAMME / RANGE
QQ
packingstresses et garnitures
SLECTION : TRESSES DE BASE / BASIC PACKINGS SLECTION : AUTRES TRESSES / OTHER PACKINGS
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
52/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN
rsistance chimique chemical resistance
3222 W
400
550
0 14
0,3
200
280
0 14
18
100
260
0 14
8
697696
Type 54 S 3222 W 3222 49 4333 54 H 4311
type dappareil tancher :
conditions maximales dutilisation maximum operating conditions
Statique RobinetterieMachines tournantes Machines alternatives type of equipment to be sealed : Static ValvesRevolving machines Alternating machines
Type 54 S 3222 W 3222 49 4333 54 H 4311
couvercles, portes,dmes de citernes
rgulationautres rob.
pompesagitateurs-mlangeurs
autrespompes piston
etc
Recommandation principale
Recommandation principale
Autre possibilit
Autre possibilit
Type
covers, doors,tank domes
control valvesother valves
pumpsagitators-mixers
otherspiston pumps
etc
Main recommendation Other possibility
Pression bar
Temprature C
pH
Vitesse m/s
200
280
0 14
3
280
550
0 14
20
100
260
0 12
15
500
280
2 12
8
250
280
2 12
20
350
550
0 14
5
100
280
1 13
12
100
280
2 12
20
100
260
2 12
10
100
450
2 12
10
Type
bar Pressure
C Temperature
pH
m/s Speed
3222 49 4333 54 H 4311
eau, eau chaude, alimentationchaudire, condensats...
vapeur< 280 C< 450 C< 550 C
hydrogneoxygnegaz, air, azotefluides caloporteursfluides chargs, abrasifsfluides cristallisants, colmatants
hydrocarbures, solvantsacides
bases
eau potable,produits alimentaires
dilus pH 3-6concentrs pH 0-2dilues pH 7-11concentres pH 12-14
4313 35 4330 25 10 4310
4313 35 4330 25 10 4310
54 SType Type
water, heated water,boiler water, condensate
steam< 280 C< 450 C< 550 C
hydrogenoxygen
gases, air, azoteheat transfer fluids
abrasive fluids or carrying particlesclogging or cristalizing fluids
hydrocarbons, solventsacids
drinking water,food processing
pH 3-6 dilutedpH 0-2 concen-pH 7-11 dilutedpH 12-14 concentrated
* sauf fluor et mtaux alcalins sauf oxygne, fluor et mtaux alcalins sauf oxydants puissants
*
35
Main recommendation Other possibility
4330 25 10 43104313
* except fluor and alcali metals except oxygen, fluor and alcali metals except powerful oxydizers
alcali
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
53/68
RR
logicielde slectionet mise en uvre
softwarefor selection
and applicationJOINTS DTANCHIT
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
54/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 701700
et mise en uvredes joints
and applicationof gaskets
Logiciel prenant en compte les paramtres des assem-blages boulonns circulaires (tous types, normaliss ounon), ainsi que les conditions de service (possibilitnotamment de 240 fluides chimiques) ; propose unensemble de solutions (choix des joints hirarchis donnes de serrage) et indique les options exclure.
Software takes into account parameters concerning cir-cular bolted assemblies (all types, including non-standar-dized types), as well as service conditions (possibility of240 chemical fluids) ; after calculation, a set of solutionis proposed (choice of gaskets classified data for tigh-tening), as well as options to be excluded.
SEALING GASKETS
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
55/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
56/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
57/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
58/68
RRfeuilles et jointsgraphite
graphitesheets and gaskets
joints mtalliques metal gaskets
SERVICE VAPEUR ET GAZ / STEAM AND GAS SERVICE SECTIONREF. DESCRIPTION Rt(m)
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
59/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN 711710
20
200 100 0C 100 200
40
60
100
120
140
160
180
200
bar
2
3
1
400300 500
80
20
200 100 0C 100 200
40
60
100
120
140
160
180
200
bar
2
3
1
400300 500
80
selon zone du diagramme, uncontrle dapplication techniqueest : facultatif (sous rserve com-
patibilit chimique) recommand indispensable
with regard to zone on diagram,a technical control of applicationis : optional (on condition chemi-cal compatibility is met)
recommended compulsory
KGL HL AS KGL SLS AS KGL PSM AS
20
200 100 0C 100 200
40
60
100
120
140
160
180
00
ar
2
3
1
400300 500
80
SERVICE VAPEUR ET GAZ / STEAM AND GAS SERVICE
JOINTS PLATS MTAL / FLAT METAL GASKETS
JOINTS PLATS MTAL-GRAPHITE / FLAT METAL-GRAPHITE GASKETS
N N (m)
A1 Mtal / Metal 1,6 6,3
A1Rme mtal + revtement graphite ou PTFEMetal core + graphite or PTFE covering layer
25 100
JOINTS MTAL-LASTOMRE / METAL-ELASTOMER GASKETS
GS
GSL
Caoutchouc / lastomre avec me acierRubber / elastomer, with steel core
Id. GS, avec lvresId. GS, with lip ring
GSL2lastomre ou PTFE avec lvres + me acierElastomer or PTFE with lip ring + steel core
GSL2/SId. GSL2, avec limiteur de serrageId. GSL2, with tightening limiter
50 100
JOINTS ONDULS / CORRUGATED GASKETS
W1
W1R
Acier inoxydableStainless steel
Acier inoxydable + revtement graphite ou PTFEStainless steel + graphite or PTFE layer
W11RId. W1R, avec centreurId. W1R, with centering ring
6,3 12,5
25 100Pour les joints en fibres lastomre, PTFE ou graphite,sont disponibles sur demande, les rsultats dessaismesurant laugmentation dpaisseur aprs immersiondans les fluides diffrentes tempratures et concentra-tions : produits ptroliers (normaliss ASTM),
acides (notamment pour C-8200), bases, eau, hydroxyde de sodium, etc
Concerning fibres-elastomer, PTFE or graphite gaskets,technical data are available as tothickness increaseafter immersioninto fluids at different temperaturesand concentrations : oil products (ASTM standardized), acids (notably for C-8200), alcali,
water, sodium hydroxyd, etc
Pour tous les joints souples utiliss en servicevapeur,lpaisseur recommande est 1,5 mm.
For all flexible gaskets used on steamapplications,recommended thicknessis 1.5 mm.
NOTE 1
NOTE 2
RR
SECTIONREF. DESCRIPTIONRt
(m) SECTIONREF. DESCRIPTIONRt
(m)
joints mtalliques metal gaskets joints mtalliques metal gaskets
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
60/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN
Joint mtallique pour changeurs de chaleurMetallic gasket, for heat exchangers
713712
JOINTS SPIRALS / SPIRAL WOUND GASKETS*FEUILLARD
METAL STRIPInox / S.S.
Ti, Monel, Inconel
etc
TYPE V
TYPE V LD
Faible contrainteLow stress
6,3 25
6,3 50
JOINTS MTALLOPLASTIQUES / METAL CLAD GASKETS
V1
V1 LD
ST7R
MT
MTR
V1J
V1J LD
Sans anneauPlain
Sans anneauPlain
Id. MTR, sans revtement graphiteId. MTR, without graphite coating
Feuillard ferm, en 2 parties avec revt. graphiteClosed sheet, in 2 parts with graphite coating
Avec anneau intrieurWith inner ring
V2
V2 LD
Avec anneau extrieurWith outer ring
V2J
V2J LDAvec anneau intrieur + anneau extrieurWith inner ring + outer ring
MECORE
GraphiteMica
SERTISSAGE MTALMETAL SHEET JACKET
Acier carb. ou Cu ou laiton/C.S. or Cu or brassNickel
Acier inox/S.S.Revt. graphite/Graphite coating
FEUILLARDMETAL STRIP
Inox / S.S.Ti, Monel, Inconel
etc
INTERCALAIREFILLER
PTFEGraphite expansExpanded graphite
12,5 256,3 12,52,5 6,325 100
MT2
MT2RFeuillard ferm, en 2 parties avec anneau ext. et revt. graphiteClosed sheet, in 2 parts with outer ring and graphite coatingId. MT2R, sans revt. graphiteId. MT2R, without graphite coating
MTW
MTWRFeuillard ondul, ferm, en 2 parties, avec revt. graphiteCorrugated sheet, closed, in 2 parts, with graphite coatingId. MTWR, sans revt. graphiteId. MTWR, without graphite coating
* Voir / Seepages 716 721
JOINTS STRIS AVEC REVTEMENT / GROOVED GASKETS WITH LAYERME MTALMETAL CORE
Acier doux/C.S.Inox/S.S.
NickelMonel, Inconel
etc
REVTEMENTCOVERING LAYER
PTFE ou/or graphiteAluminium ou/orargent/silver
Nickel
25 10012,5 256,3 12,5
ST9RAvec anneau extrieur monoblocWith one-piece outer ring
ST15RAvec anneau extrieur rapportWith welded outer ring
ST27RSans anneauPlain
ST29RAvec anneau extrieur monoblocWith one-piece outer ring
PF27R
PF29RAutres modles / Other types
T4
DIVERS / MISCELLANEOUS
JOINTS PLATS AVEC REVTEMENTFLAT GASKETS WITH LAYER
JOINTS BOMBS STRIS AVEC REVTEMENTCONVEX GROOVED GASKETS WITH LAYER
INTERCALAIREFILLER
PTFEGraphite expansExpanded graphite
MicaNonas
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
61/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
62/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
63/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
64/68
SSmatelas isolants isulating blankets
CALONATDESCRIPTION
MATELAS ISOLANTS
INSULATING BLANKETS
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
65/68
1 2 3 4 5 6 7 8SOMMAIRECONTENTS
TROUVAY & CAUVIN PIPING EQUIPMENT 2001 PIPING EQUIPMENT 2001 TROUVAY & CAUVIN
NTCE 300
NTCM 400
NTCM HT 500
NTCM HT 600
NTCM HT 800
280 C
380 C
500 C
600 C
800 C
723722
CALONAT
compositionLaine de verre avec enveloppe en tissu de verre ignifugeimprgn, enduit dun lastomre spcial (silicone, et/ouautre).
caractristiques haute capacit disolation thermique, rsistance au feu, rsistance la corrosion, rsistance lusure et la perforation, tanchit leau, montage, dmontage et rutilisation simples.
tailles et formes matelas standard pour vannes et brides selon normes, matelas spciaux selon spcificications pour :
tous appareils de robinetterie, trous dhomme, compensateurs de dilatation, ttes
dchangeurs, rducteurs, etc
gamme et tempratures
materials
Mineral wool with a special fireproof glass-fibre fabric,coated with a specific elastomer (silicon and/or other).
features high thermal insulation capacity, fire resistant, corrosion resistant, abrasion and puncture resistance,
waterproof, easily installed, removed and re-used.
sizes and shapes standard blankets for valves and flanges according to
standards,
special blankets to customers specification for : all types of valves and accessories, manhole covers, expansion joints, exchanger heads,
reducers, etc
range and temperatures
Temprature limite dutilisation en continuMaximum working temperature for long term usage
INSULATING BLANKETS
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
66/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
67/68
-
8/14/2019 TROUVAY & CAUVIN (Matriel Divers Ptrole) - chap08
68/68