tse deney ve kalİbrasyon merkezİ … of the certificate (page 2/40) accreditation scope tse deney...

Annex of the certificate (/40)

Accreditation Scope

TSE

DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI

Ankara Deney Laboratuvarları

Accreditation Nr: AB-0001-T

Revision Nr: 019 Date: 07 December 2015

AB-0001-T Address: Necatibey cad. 112 Bakanlıklar

06100

ANKARA / TÜRKİYE

Website : www.tse.org.tr

: [email protected]

Fax : 0 312 416 66 11

: 0 312 416 62 00Phone

Testing Method

(National, International standards,

in house methods)

Tested

Materials / ProductsName of Test

As a Testing Laboratory

ELECTROTECHNICAL LABORATORY

PVC Insulated

Cables

Electrical test methods for low voltage

energy cables

TS EN 50395

EN 50395

Non electrical test methods for low

voltage energy cables

TS EN 50396

EN 50396

Electric cables - Low voltage energy

cables of rated voltages up to and

including 450/750 V (U0/U) - Part 1:

General requirements

TS EN 50525-1

EN 50525-1



including 450/750 V (U0/U) - Part 2-31:

Cables for general applications - Single

core non-sheathed cables with

thermoplastic PVC insulation

TS EN 50525-2-31

EN 50525-2-31

Polyinyl chloride insulated cables of rated

voltages up to and including 450/750 V

part 4-Sheathed cables for fixed wiring

TS 9759 HD 21.4 S2

HD 21.4 S2



including 450/750 V (Uo/U) - Part 2-11:

Cables for general applications - Flexible

cables with thermoplastic PVC insulation

TS EN 50525-2-11

EN 50525-2-11




Cables for general applications - Flat

tinsel cables (cords) with thermoplastic

PVC insulation

TS EN 50525-2-71

EN 50525-2-71


Accreditation Scope

TSE




Revision Nr: 019 Date: 07 December 2015AB-0001-T

Testing Method


in house methods)

Name of Test Tested

Materials / Products

Polyvinil chloride insulated cables of radet

volgages up to and including 450/750

V-Part 8: Single core nonsheathed cables

for decorative chains

(PVC Insulated

Cables, continued)

TS HD 21.8 S2

HD 21.8 S2

Polyvinyl chloride insulated cables of

rated voltages up to and including

450/750 V -- Part 9: Single core

non-sheathed cable for installation at low

temperatures Amendment 1

TS HD 21.9 S2

HD 21.9 S2




Cables for general applications - Flat

divisible cables (cords) with thermoplastic

PVC insulation

TS EN 50525-2-72

EN 50525-2-72




Cables for general applications - Oil

resistant control cables with

thermoplastic PVC insulation

TS EN 50525-2-51

EN 50525-2-51




Cables with special fire performance -

Flexible cables with halogen-free

thermoplastic insulation, and low

emission of smoke

TS EN 50525-3-11

EN 50525-3-11


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested






Single core non-sheathed cables with

halogen-free thermoplastic insulation,

and low emission of smoke

(PVC Insulated

Cables, continued)

TS EN 50525-3-31

EN 50525-3-31

Rubber Insulated

Cables

Cables of rated voltages up to and

including 450/750 V and having

cross-linked insulation -- Part 3: Heat

resistant silicone rubber insulated cables

TS EN 50525-2-41

EN 50525-2-41



including 450/750 V (Uo/U) - Part 2-21:

Cables for general applications - Flexible

cables with crosslinked elastomeric

insulation

(Excluding of With water resistant

Polychloropene or equivalent synthetic

elastomer sheathed cable)

TS EN 50525-2-21

EN 50525-2-21




Cables for general applications - Cables

with crosslinked elastomeric covering for

arc welding

TS EN 50525-2-81

EN 50525-2-81

Rubber insulated cables to rated voltages

up to and including 450/750 V- Part 7:

Cables with increased heat resistance for

internal wiring for a conductor

temperature of 110 C.

TS EN 50525-2-42

EN 50525-2-42


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Rubber insulated cables of rated voltages

up to and including 450/750 V Part 8:

Polychloropene or equivalent synthetic

elastomer sheathed cable for decorative

chains

(Rubber Insulated

Cables, continued)

TS EN 50525-2-82

EN 50525-2-82





Single core non-sheathed cables with

halogen-free crosslinked insulation, and

low emission of smoke

TS EN 50525-3-41

EN 50525-3-41





Flexible cables with halogen-free

crosslinked insulation, and low emission

of smoke

TS EN 50525-3-21

EN 50525-3-21




Cables for general applications - High

flexibility braided cables crosslinked

elastomeric insulation

TS EN 50525-2-22

EN 50525-2-22

Cables of rated voltages up to and

including 450/750 V and having

cross-linked insulation - Part 15: Multicore

cables insulated and sheathed with heat

resistant silicone rubber

TS EN 50525-2-83

EN 50525-2-83

Lift cables and

Cables for Flexible

Connections

Polyvinyl Chloride Insulated Cables of

Rated Voltages up to and Including

450/750 V Part 6:Lift Cables and Cables

for Flexible Connections

TS IEC 60227-6

IEC 60227-6


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Flat Polyvinyl Choride sheathed flexible

cables(Lift cables and

Cables for Flexible

Connections,

continued)

TS EN 50214

EN 50214

Conduit Systems for

Electrical

Installations

Rigid conduit systems TS EN 61386-1

EN 61386-1

TS EN 61386-21

EN 61386-21

Pliable conduit systems TS EN 61386-1

EN 61386-1

TS EN 61386-22

EN 61386-22

Distribution Cables Distribution cables of rated voltage 0,6 / 1

kV

TS HD 603 S1

HD 603 S1

Test methods for accessories for power

cables with rated voltages from 6 kV

(U<(Index)m> = 7, 2 kV) up to 30 kV

(U<(Index)m> = 36 kV)

TS IEC 60502-1

IEC 60502-1

0,6 / 1 kV and 1,9 / 3,3 kV power cables

with special fire performance for use in

power stations

TS HD 604 S1

HD 604 S1

Aerial bundled Cables with aluminium

conductor rated voltage 0,6/1 kV

(Except of Clause:2.3.2.6)

TS 11654

Cables for Vehicles Cables for Vehicles TS 1435

Cables and Cords Test methods and requirements for

accessories for use on distribution cables

of rated voltage 0,6/1,0 (1,2) kV

TS EN 50393

EN 50393


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Power cables with extruded insulation and

their accessories for rated voltages from 1

kV (U<(Index)m> = 1, 2 kV) up to 30 kV

(U<(Index)m> = 36 kV) - Part 1: Cables for

rated voltages of 1 kV (U<(Index)m> = 1, 2

kV) and 3 kV (U<(Index)m> = 3, 6 kV)

(Cables and Cords,

continued)

TS IEC 60502-2

IEC 60502-2

Cable management - Cable tray systems

and cable ladder systems

TS EN 61537

EN 61537

Household And

Similar Appliances

Safety of Household and Similar Electrical

Appliances - Part 1: General Requirements

TS EN 60335-1

EN 60335-1

IEC 60335-1


Appliances - Part 2.2: Particular

Requirements for Vacuum Cleaners and

Water Suction Cleaning Appliances

TS EN 60335-2-2

EN 60335-2-2

IEC 60335-2-2


Appliances-Part 2-3: Particular

Requirements for Electric Irons

TS 2002 EN 60335-2- 3

EN 60335-2-3

IEC 60335-2-3


Appliances-Part 2.5: Particular

Requirements for Dishwashers

TS 11300 EN 60335-2-5

EN 60335-2-5

IEC 60335-2-5



Requirements for Cooking Ranges,

Cooking Tables, Ovens and Similar

Appliances for Household Use

TS 2003 EN 60335-2-6

EN 60335-2-6

IEC60335-2-6


Appliances Part 2.7: Particular

Requirements for Washing Machines

TS EN 60335-2-7

EN 60335-2-7

IEC60335-2-7


Appliances Part 2-9: Particular

Requirements for Toasters Grills, Roasters

and Similar Portable Appliances

TS 2005 EN 60335-2-9

EN 60335-2-9

IEC60335-2-9


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested



Appliances Part 2.11 Particular

Requirements for Tumble Dryers

(Household And

Similar Appliances,

continued)

TS EN 60335-2-11

EN 60335-2-11

IEC60335-2-11



Requirements for Deep Fat Fryers, Frying

Pans and Similar Appliances

TS EN 60335-2-13

EN 60335-2-13

IEC60335-2-13


Appliances - Part 2-14: Particular

Requirements for Kitchen Machines

TS EN 60335-2-14

EN 60335-2-14

IEC60335-2-14

Household and similar electrical

appliances - Safety - Part 2-15: Particular

requirements for appliances for heating

liquids

TS 4788 EN 60335-2-15

EN 60335-2-15

IEC60335-2-15

Safety of household and similar electrical

appliances - Part 2-21: Particular

requirements for storage water heaters;

(Amendment A12)

TS 2212 EN 60335-2-21

EN 60335-2-21

IEC 60335-2-21


appliances - Part 2-23: Particular

requirements for appliances for skin and

hair care; (Amendment A1)

TS 374 EN 60335- 2- 23

EN 60335-2-23

IEC 60335-2-23


appliances - safety - Part 2-24: Particular

requirements for refrigerating appliances,

ice-cream appliances and ice-makers

TS EN 60335-2-24

EN 60335-2-24

IEC60335-2-24


appliances - Safety Part 2-28: Particular

requirements for sewing machines

TS EN 60335-2-28

EN 60335-2-28

IEC60335-2-28


appliances - Safety - Part 2-29: Particular

requirements for battery chargers

TS EN 60335-2-29

EN 60335-2-29

IEC 60335-2-29


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested



appliances - Part 2: Particular

requirements for room heaters

(Household And

Similar Appliances,

continued)

TS EN 60335-2-30

EN60335-2-30

IEC60335-2-30


appliances - Safety - Part 2-31 : Particular

requirements for range hoods

TS EN 60335- 2- 31

EN60335-2-31

IEC60335-2-31


appliances -Safety - Part 2-35: Particular

requirements for instantaneous water

heaters

TS 6844 EN 60335-2-35

EN60335-2-35

IEC60335-2-35


Appliances-Part 2-43: Particular

Requiments for Clothes Dryers and Towel

Rails

TS EN 60335- 2- 43

EN60335-2-43

IEC60335-2-43


Appliances Part 2.44: Particular

Requirements for Electric Ironers

TS EN 60335- 2- 44

EN60335-2-44

IEC60335-2-44


Appliances Part 2-45: Particular

Requirements for Portable Heating Tools

and Similar Appliances

TS EN 60335- 2- 45

EN60335-2-45

IEC60335-2-45


Appliances-Part 2.80: Particular

Requirements for Fans

TS EN 60335-2-80

EN60335-2-80

IEC60335-2-80

Household refrigerating appliances -

Characteristics and test methods

(Excluding of Clause:11Testing the

durability of doors, lids and drawers and

Clause:12 Testing mechanical strength of

shelves and similar components.)

TS EN 62552

EN 62552

IEC 62552


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Enerji Efficiency for

Ovens

Electric cooking ranges, hobs, ovens and

grills for household use - Methods for

measuring performance ANNEX-ZA:

Requirements of Commision directive for

Enerji Labelling

TS EN 50304 EN 60350

Accesories And

Connecting Devices

For Electirical

Installations

Switches for Electrical Appliances; Part 1:

General Requirements

TS EN 61058-1

EN 61058-1

IEC 61058-1

Switches for Household and Similar

Fixed-Electrical Installations Part 1:

General Requirements

TS 4915 EN 60669-1

EN 60669-1

IEC 60669-1

Connecting Devices for Low Voltage

Circuits for Household and Similar

Purposes Part 1: General Requirements

TS 10486 EN 60998-1

EN 60998-1

IEC 60998-1

Connecting devices for low-voltage

circuits for household and similar

purposes - Part 2-1: Particular

requirements for connecting devices as

separate entities with screw-type

clamping units

TS 10487 EN 60998-2-1

EN 60998-2-1

IEC 60998-2-1

Boxes and enclosures for electrical

accessories for household and similar

fixed electrical installation - Part 1:

General requirements

TS EN 60670-1

EN 60670-1

Flat non-rewirable two-pole plugs, 2,5 A

250 V, with cord, for the connection of

class II-equipment for household and

similar purposes

TS EN 50075

EN 50075

Lighting Glow-Starters for Fluorescent Lamps TS 805 EN 60155

EN 60155

IEC 60155


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Lamp controlgear -- Part 1: General and

safety requirements(Lighting, continued) TS EN 61347-1

EN 61347-1

IEC 61347-1

Lamp controlgear - Part 2-8: Particular

requirements for ballasts for fluorescent

lamps

TS EN 61347-2-8

EN 61347-2-8

IEC 61347-2-8

Lamp controlgear -- Part 2-9: Particular

requirements for ballasts for discharge

lamps (excluding fluorescent lamps)

TS EN 61347-2-9

EN 61347-2-9

IEC 61347-2-9

Luminaires Luminaires - Part 1: General requirements

and tests

TS EN 60598-1

EN 60598-1

IEC 598-1

Luminaires-Part 2: Particular

Requirements-Section One: Fixed General

Purpose Luminaires

TS 8698 EN 60598-2-1

EN 60598-2-1

IEC 60598-2-1

Luminaires - Part 2-2: Particular

requirements - Recessed luminaires

TS EN 60598-2-2

EN 60598-2-2

IEC 60598-2-2

Luminaires -- Part 2-3: Particular

requirements - Luminaires for road and

street

TS 8700 EN 60598-2-3

EN 60598-2-3

IEC 60598-2-3

Luminaires -- Part 2-5: Particular

requirements - Floodlights

TS 8702 EN 60598-2-5

EN 60598-2-5

IEC 60598-2-5

Lead-Acid Batteries Lead-acid starter batteries-Part 1:General

requirements and methods of test

(Except of Clause:5.9 Rule:3 )

TS EN 50342-1

EN 50342-1

Plugs and Socket

Outlets

Marking TS 40

TS IEC 60884-1

IEC 60884-1


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Checking of Dimensions(Plugs and Socket

Outlets, continued)

TS 40

TS IEC 60884-1

IEC 60884-1

Protection Against Electric Shock TS 40

TS IEC 60884-1

IEC 60884-1

Provision of Earthing TS 40

TS IEC 60884-1

IEC 60884-1

Terminals TS 40

TS IEC 60884-1

IEC 60884-1

Construction of Fixed Socket- Outlets TS 40

TS IEC 60884-1

IEC 60884-1

Construction of Plugs and Portable Socket-

Outlets

TS 40

TS IEC 60884-1

IEC 60884-1

Resistance to Ageing, to Harmful Ingress

of Water and to Humidity

TS 40

TS IEC 60884-1

IEC 60884-1

Insulation Resistance and Electric

Strength

TS 40

TS IEC 60884-1

IEC 60884-1

Temperature Rise TS 40

TS IEC 60884-1

IEC 60884-1

Breaking Capacitiy TS 40

TS IEC 60884-1

IEC 60884-1


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Normal Operation(Plugs and Socket

Outlets, continued)

TS 40

TS IEC 60884-1

IEC 60884-1

Force Necessary to Withdraw the Plug TS 40

TS IEC 60884-1

IEC 60884-1

Flexible Cables and Their Connection TS 40

TS IEC 60884-1

IEC 60884-1

Mechanical Strength TS 40

TS IEC 60884-1

IEC 60884-1

Resistance to Heat TS 40

TS IEC 60884-1

IEC 60884-1

Screws, Current Carrying Parts and

Connections

TS 40

TS IEC 60884-1

IEC 60884-1

Creepage Distances, Clearences and

Distances Through Sealing Compound

TS 40

TS IEC 60884-1

IEC 60884-1

Resistance of Insulating Material to

Abnormal Heat, to Fire and to Tracking

TS 40

TS IEC 60884-1

IEC 60884-1

Resistance to Rusting TS 40

TS IEC 60884-1

IEC 60884-1

Electromagnetic

Compatibility -

Residential,

Commercial and

Light - Industrial

Environments

Mains Terminal Disturbance Voltage

(150kHz - 30MHz) Network: Mono phase

and triphase, 0-16A

TS EN 61000-6-3

EN 61000-6-3

IEC 61000-6-3


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Electrostatic Discharge Immunity Test (+/-

polarities; Air Discharge: 200V - 16.5kV,

Contact Discharge: 200V - 9kV)

(Electromagnetic

Compatibility -

Residential,

Commercial and

Light - Industrial

Environments,

continued)

TS EN 61000-6-1

EN 61000-6-1

IEC 61000-6-1

Electrical Fast Transient/ Burst Immunity

Test

(Voltage Level: 0-4800 V, f: 0-1000 kHz)

TS EN 61000-6-1

EN 61000-6-1

IEC 61000-6-1

Surge Immunity Test

( 0.2 - 4,5 kV)

TS EN 61000-6-1

EN 61000-6-1

IEC 61000-6-1

Immunity To Conducted Disturbances,

Induced By Radio-Frequency Fields

(Frequency Range 150kHz - 230MHz ; at

levels 1V, 3V, 10V )

TS EN 61000-6-1

EN 61000-6-1

IEC 61000-6-1

Electromagnetic

Compatibility -

Industrial

Environments

Products



and tri phase, 0-16A

TS EN 61000-6-4

EN 61000-6-4

IEC 61000-6-4




TS EN 61000-6-2

EN 61000-6-2

IEC 61000-6-2

Electrical Fast Transient / Burst Immunity

Test

(Voltage Level: 0-4800 V, f: 0-1000 kHz)

TS EN 61000-6-2

EN 61000-6-2

IEC 61000-6-2

Surge Immunity Test

( 0.2 - 4,5 kV)

TS EN 61000-6-2

EN 61000-6-2

IEC 61000-6-2


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested






(Electromagnetic

Compatibility -

Industrial

Environments

Products, continued)

TS EN 61000-6-2

EN 61000-6-2

IEC 61000-6-2

Electromagnetic

Compatibility -

Household

Appliances, Electric

Tools and Similar

Apparatus


(150kHz - 30MHz) Network: Monophase

and triphase, 0-16A

TS EN 55014-1

EN 55014-1

CISPR 14-1


(30MHz - 300MHz)

TS EN 55014-1

EN 55014-1

CISPR 14-1

Discontinuous Interference

(160 kHz, 500 kHz, 1.4 MHz, 30 Hz)

Network: Monophase and triphase, 0-16A

TS EN 55014-1

EN 55014-1

CISPR 14-1




TS EN 55014-2

EN 55014-2

CISPR 14-2


Test (Voltage Level: 0-4800 V, f: 0-1000

kHz)

TS EN 55014-2

EN 55014-2

CISPR 14-2

Surge Immunity Test

( 0.2 - 4,5 kV)

TS EN 55014-2

EN 55014-2

CISPR 14-2





TS EN 55014-2

EN 55014-2

CISPR 14-2


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Voltage Dips, Short Interruptions And

Voltage Variations ImmunityTests

(Between Levels %0.UT - %100.UT; time

periods 0.05 - 9999ms )

(Electromagnetic

Compatibility -

Household

Appliances, Electric

Tools and Similar

Apparatus,

continued)

TS EN 55014-2

EN 55014-2

CISPR 14-2

Electromagnetic

Compatibility -

Information

Technology

Equipments


(150kHz - 30MHz) Network: monophase

and triphase, 0-16A

TS EN 55022

EN 55022

CISPR 22

Electrostatic Discharge Immunity Test

(+/- polarities; Air Discharge: 200V -

16.5kV,

TS EN 55024

EN 55024

CISPR 24


Test (Voltage level: 0-4800 V, f: 0-1000

kHz)

TS EN 55024

EN 55024

CISPR 24

Surge Immunity Test

( 0.2 - 4,5 kV)

TS EN 55024

EN 55024

CISPR 24



(Frequency Range 150kHz - 230MHz; at


TS EN 55024

EN 55024

CISPR 24

Voltage Dips, Short Interruptions And

Voltage Variations Immunity Tests


periods 0.05 - 9999ms )

TS EN 55024

EN 55024

CISPR 24


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Electromagnetic

Compatibility -

Industrial, Scientific

and Medical (ISM)

Radio-Frequency

Equipment



and triphase, 0-16A

TS EN 55011

EN 55011

CISPR 11

Electromagnetic

Compatibility -

Equipment with

Rated Current up to

16A per Phase

Harmonics

(Between harmonics 2-40. )

TS EN 61000-3-2

EN 61000-3-2

IEC 61000-3-2

Voltage Changes, Fluctuations And Flicker

(transient and prolonged)

TS EN 61000-3-3

EN 61000-3-3

IEC 61000-3-3

Electromagnetic

Compatibility-Electri

cal and Electronics

Equipment

subjected to Static

Electricity

Discharges, From

Operators Directly

and to adjacent

Objects




TS EN 61000-4-2

EN 61000-4-2

IEC 61000-4-2

Electromagnetic

Compatibility -

Electrical and

electronic

Equipment

Subjected To

Electrical Fast

Transient/Burst


Test (Voltage Level: 0-4800 V, f: 0-1000

kHz)

TS EN 61000-4-4

EN 61000-4-4

IEC 61000-4-4


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Electromagnetic

Compatibility -

Electrical and

Electronic

Equipment

Subjected To

undirectional surges

caused by over

volteges from

switching and

lighting transients

Surge Immunity Test

( 0.2 - 4,5 kV)

TS EN 61000-4-5

EN 61000-4-5

IEC 61000-4-5

Electromagnetic

Compatibility -

Electrical And

Electronic

Equipment

Subjected To

Conducted

Disturbances,

Induced By Radio -

Frequency Fields

From 9 kHz to 80

MHz



(Frequency Range 150kHz - 230MHz; at


TS EN 61000-4-6

EN 61000-4-6

IEC 61000-4-6

Electromagnetic

Compatibility -

Electrical and

Electronic

Equipment

Connected To Low

Voltage Power

Supply

Voltage Dips,Short Interruptions And

Voltage Variations Immunity Tests


periods 0.05 - 9999ms )

TS EN 61000-4-11

EN 61000-4-11

IEC 61000-4-11


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Electromagnetic

Compatibility -

Equipment With

Rated Current up to

16A per Phase

Harmonics and interharmonics including

mains signalling at a.c. power port, low

frequency immunity tests

TS EN 61000-4-13

EN 61000-4-13

IEC 61000-4-13

CHEMISTRY LABORATORY

Cement Determination of Loss On Ignition TS EN 196-2

EN 196-2

Determination of Chloride TS EN 196-2

EN 196-2

Determination of Residue Insoluble in HCl

and Na₂CO₃

TS EN 196-2

EN 196-2

Gravimetric Determination of Sulphate TS EN 196-2

EN 196-2

Pozzolanicity Test TS EN 196-5

EN 196-5

Iron and Steel Determination of Carbon and Sulfur

Content

ASTM-E 1019

Fertilizers Determination of Total Nitrogen Content AOAC 993.13

Ammonium Nitrate

Fertilizers

Determination of Carbon Content ASTM D 5291-96

Toys Small Parts Cylinder TS EN 71-1

EN 71-1

Torque Test TS EN 71-1

EN 71-1

Drop Test TS EN 71-1

EN 71-1

Tip Over Test TS EN 71-1

EN 71-1

Soaking Test TS EN 71-1

EN 71-1


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Accessibility of a part or component(Toys, continued) TS EN 71-1

EN 71-1

Sharpness of edges TS EN 71-1

EN 71-1

Sharpness of points TS EN 71-1

EN 71-1

Flexibility of Wires TS EN 71-1

EN 71-1

Geometric Shape of Certain Toys TS EN 71-1

EN 71-1

Durability of Mouth Actuated Toys TS EN 71-1

EN 71-1

Folding or Sliding Mechanisms TS EN 71-1

EN 71-1

Cord Thickness TS EN 71-1

EN 71-1

Static Strength TS EN 71-1

EN 71-1

Dynamic Strength TS EN 71-1

EN 71-1

Stability Test TS EN 71-1

EN 71-1

Determination of Kinetic Energy TS EN 71-1

EN 71-1

Flammability TS EN 71-2

EN 71-2

Safety of Toys Part3 : Migration of Some

Elements (Al, Sb, As, Ba, B, Cd, Co, Cu, Pb,

Mn, Hg, Ni, Se, Sr, Sn, Total Cr, Zn, except

for Cr VI and organic Tin)

TS EN 71-3

EN 71-3

ISO 8124-3

Rubber Determination of Density- (Method A) TS 2827 ISO 2781

ISO 2781


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Plastics Determination of Density- (Method A) TS 1310

Determination of Hardness

(Shore A and D)

TS EN ISO 868

EN ISO 868

ISO 868

Rubber-Vulcanized,

Thermoplastic

Rubber

Outsole-Personal

Protective

Equipment

Determination of Abrasion Resistance TS 11007 - Method A

ISO 4649 - Method A

Rubber-Vulcanized,

Thermoplastic

Determination of Hardness

(10 IRHD - 100 IRHD)

TS ISO 48

ISO 48

Personal Protective

Equipment -

Footwear

Determination of Thickness of Outsole TS EN ISO 20344 Clause 8.1

EN ISO 20344 Clause 8.1

Determination of Impact Resistance of

Toecap

TS EN ISO 20344 Clause 5.4

TS EN ISO 20344 Clause 5.4

Plastic -

Non-cellular Plastic

Determination of Density TS EN ISO 1183-1 - Method A

EN ISO 1183-1 - Method A

Plastic and Textile

materials

Determination of Phthalate In house Method

LAB-D-7-DTL-022

(Modified from EN 14372, EN

15777)

Textile materials Determination of Azodyes In house Method

LAB-D-7-DTL-024

(Modified from EN 14362-1 )

Ceramic ware,

glass-ceramic ware

and glass

dinnerware

Ceramic ware, glass-ceramic ware and

glass dinnerware in contact with

food-Release of lead and cadmium

TS 4422 ISO 6486-2

ISO 6486-2


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Silicate Surfaces

Materials and Articles in Contact with

Foodstuffs-Silicate Surfaces-Part 1:

Determination of the Release of Lead and

Cadmium from Ceramic Ware

TS EN 1388-1

EN 1388-1

Ceramic Tiles

Determination of lead and Cadmium given

off by glazed tiles

TS EN ISO 10545-15

EN ISO 10545-15

CONSTRUCTION MATERIALS LABORATORY

Terrazzo tiles - Part

1: Terrazzo tiles for

internal use

Dimensional deviations TS 213-1 EN 13748-1

EN 13748-1

Straightness of edges of the upper face TS 213-1 EN 13748-1

EN 13748-1

Flatness of the upper face TS 213-1 EN 13748-1

EN 13748-1

Breaking strength and Breaking load TS 213-1 EN 13748-1

EN 13748-1

Water absorption TS 213-1 EN 13748-1

EN 13748-1

Slip resistance TS 213-1 EN 13748-1

EN 13748-1

Abrasion resistance(Bohme test method) TS 213-1 EN 13748-1

EN 13748-1

Terrazzo tiles - Part


external use

Dimensional deviations TS 213-2 EN 13748-2

EN 13748-2

Straightness of edges of the upper face TS 213-2 EN 13748-2

EN 13748-2

Flatness of the upper face TS 213-2 EN 13748-2

EN 13748-2


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Breaking strength and Breaking load(Terrazzo tiles - Part


external use,

continued)

TS 213-2 EN 13748-2

EN 13748-2

Water absorption TS 213-2 EN 13748-2

EN 13748-2

Slip resistance TS 213-2 EN 13748-2

EN 13748-2

Abrasion resistance (Bohme test method) TS 213-2 EN 13748-2

EN 13748-2

Cement Determination of strength TS EN 196-1

EN 196-1

Setting time TS EN 196-3+A1

EN 196-3+A1

Soundness TS EN 196-3+A1

EN 196-3+A1

Whiteness test In house Method-16.40.03.DT.001

Wood-based panels Determination of moisture content TS EN 322

EN 322

Determination of density TS EN 323

EN 323

Determination of dimensions of boards-

Part 1: Determination of thickness, width

and length

TS EN 324-1

EN 324-1

Determination of modulus of elasticity in

bending and of bending strength (Max 4

tons)

TS EN 310

EN 310

Surface soundness - Test method (Max 4

tons)

TS EN 311

EN 311

Determination of dimensions of test

pieces

TS EN 325

EN 325


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Sampling, cutting and inspection - Part 1:

Sampling test pieces and expression of

test results

(Wood-based

panels, continued)

TS EN 326-1

EN 326-1

Wood-Based panels- Determination of

dimensions of boards- Part 2:

Determination of squareness and edge

straightness

TS EN 324-2

EN 324-2

Particleboards and

fibreboards

Determination of swelling in thickness

after immersion in water

TS EN 317

EN 317

Determination of tensile strength

perpendicular to the plane of the board

(Max 4 tons)

TS EN 319

EN 319

High-pressure

decorative

laminates (HPL) -

Sheets based on

thermosetting

resins (usually

called laminates)

Resistance to surface wear TS EN 438-2

EN 438-2

Resistance to abrasion ( flooring grade

laminates )

TS EN 438-2

EN 438-2

Substrate protection againts water vapour TS EN 438-2

EN 438-

Resistance to water vapour TS EN 438-2

EN 438-2

Resistance to dry heat TS EN 438-2

EN 438-2

Resistance to scratching TS EN 438-2

EN 438-2

Resistance to staining TS EN 438-2

EN 438-2


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Resistance to cigarette burns(High-pressure

decorative

laminates (HPL) -

Sheets based on

thermosetting resins

(usually called

laminates),

continued)

TS EN 438-2

EN 438-2

Furniture Surfaces Determination of Abrasive Resistance TS EN 15185

Determination of Resistance to Glowing

Cigarette

TS 4756

Aggregates-

- Concrete

Aggregates

- Aggregates for

bituminous mixtures

and surface

treatments for

roads, airfields and

other traficked

areas

- Aggregates for

unbound and

hydraulically bound

materials for use in

civil engineering

work and road

construction

- Aggregates for

railway ballast

- Aggregates for

mortar

Determination of particle size distribution

sieving method

TS EN 933-1

EN 933-1

ISO 6274


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Fines Content(Aggregates- -

Concrete

Aggregates -

Aggregates for

bituminous mixtures

and surface

treatments for


other traficked areas

- Aggregates for

unbound and

hydraulically bound


civil engineering

work and road

construction -

Aggregates for

railway ballast -

Aggregates for

mortar, continued)

TS EN 933-1

EN 933-1

ISO 6274

Determination of particle shape- Flakiness

index

TS EN 933-3

EN 933-3

Assessment of fines- Sand equivalent TS EN 933-8

EN 933-8

Assessment of fines - Methylene blue test TS EN 933-9+A1

EN 933-9+A1

Methods for the determination of

resistance to fragmentation-Los Angeles

TS EN 1097-2

EN 1097-2

Determination of particle density and

water absorption

TS EN 1097-6

EN 1097-6

Determination of loose bulk density and

voids

TS EN 1097-3

EN 1097-3


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Determination of drying shrinkage(Aggregates- -

Concrete

Aggregates -

Aggregates for

bituminous mixtures

and surface

treatments for


other traficked areas

- Aggregates for

unbound and

hydraulically bound


civil engineering

work and road

construction -

Aggregates for

railway ballast -

Aggregates for

mortar, continued)

TS EN 1367-4

EN 1367-4

Aggregates Shape index TS EN 933-4

EN 933-4

Determination of the resistance to ware

(Micro- Deval)

TS EN 1097-1

EN 1097-1

Determination of the polished stone value TS EN 1097-8

EN 1097-8

Aggregates-

-Concrete

Aggregates

Alkali Reactivity Mortar-Bar

Method

TS 706 EN 12620+A1

EN 12620

CSA A23.2-25A

ASTM C 1260


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Aggregates-

- Aggregates for

mortar

Alkali Reactivity Mortar-Bar

Method

TS EN 13139

EN 13139

CSA A23.2-25A

ASTM C 1260

Aggregates-

- Concrete

Aggregates

- Aggregates for

unbound and

hydraulically bound


civil engineering

work and road

construction

- Aggregates for

mortar

Compressive Strength of Mortar Test

Specimens

TS EN 1744-1+A1

EN 1744-1+A1

Stiffening Time of Mortar Test Specimens TS EN 1744-1+A1

EN 1744-1+A1

Aggregates for

railway balast

Particle length TS EN 13450

EN 13450

Road Aggregates Determination of the affinity between

aggregate and bitumen

TS EN 12697-11


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Aggregates-

- Concrete

Aggregates

- Aggregates for

bituminous mixtures

and surface

treatments for


other traficked

areas

- Aggregates for

unbound and

hydraulically bound


civil engineering

work and road

construction

- Aggregates for

railway ballast

- Aggregates for

mortar

Tests for thermal and weathering

properties of aggregates- Part 2:

Magnesium sulfate test

TS EN 1367-2

EN 1367-2

Concrete kerb units

Concrete paving

blocks

Due to weather the effects of wear

resistance (water absorption)

TS 436 EN 1340-App.E

EN 1340


resistance (water absorption)

TS 2824 EN 1338-App.E

EN 1338


resistance (freeze thaw)

TS 436 EN 1340-App.D

EN 1340


resistance (freeze thaw)

TS 2824 EN 1338-App.D

EN 1338

Concrete kerb units Thickness of facing layer TS 436 EN 1340-App. C

EN 1340


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Concrete paving

blocks

Thickness of facing layer TS 2824 EN 1338 - App. C

EN 1338

Concrete kerb units Bending strength TS 436 EN 1340 - App. F

EN 1340

Abrasion according to the Böhme test TS 436 EN 1340 - App. H

EN 1340

Concrete paving

blocks

Abrasion according to the Böhme test TS 2824 EN 1338 - App. H

EN 1338

Concrete kerb units Slip/skid resistance TS 436 EN 1340 - App. I

EN 1340

Concrete paving

blocks

Slip/skid resistance TS 2824 EN 1338- App. I

EN 1338

Slabs of natural

stone for external

paving

Determination of the slip resistance TS EN 1341

EN 1341

Setts of natural

stone for external

paving

Determination of the slip resistance TS EN 1342

EN 1342

Concrete paving

blocks

Tensile splitting strength TS 2824 EN 1338 - App. F

EN 1338

Slabs of natural

stone for external

paving

Shape and dimensions TS EN 1341

EN 1341

Kerbs of natural

stone for external

paving


EN 1343

Setts of natural

stone for external

paving


EN 1342

Natural stone Measurement of abrasion resistance TS EN 1341

EN 1341


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Measurement of abrasion resistance(Natural stone,

continued)

TS EN 1342

EN 1342

Determination of abrasion resistance TS EN 14157

EN 14157

(Method A)

Böhme Abrasion Test TS EN 14157 - Method B

EN 14157

Determination of compressive strength TS EN 1926

EN 1926

Determination of water absorption

coefficient by capillarity

TS EN 1925

EN 1925

Natural stone

products

- Modular tiles

- Slabs for floors

and stairs


EN 13373

Natural stone

products

- Modular tiles

- Slabs for floors

and stairs

Determination of the slip resistance EN 14231

Natural stone

products

-Kerbs of natural

stone for external

paving

-Slabs of natural

stone for external

paving

- Modular tiles

-Slabs for floors and

stairs

Determination of frost resistance TS EN 12371

EN 12371


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Natural stone

products

-Kerbs of natural

stone for external

paving

-Slabs of natural

stone for external

paving

- Modular tiles


stairs

Flexural strength TS EN 12372

EN 12372

Natural stone

products

-Kerbs of natural

stone for external

paving

-Slabs of natural

stone for external

paving

- Modular tiles


stairs

Water absorption at atmospheric pressure TS EN 13755

EN 13755

Concrete Compressive strength of test specimens TS EN 12390-3

EN 12390-3

Density of hardened concrete TS EN 12390-7

EN 12390-7

Determination of Tensile Splitting

Strength

TS EN 12390-6

EN 12390-6

Adhesives for tiles Adhesives for tiles - Determination of

tensile adhesion strenght for cementitious

adhesives

TS EN 1348

EN 1348

Adhesive for tiles-Determination of open

time

TS EN 1346

EN 1346


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Adhesives for tiles - Determination of

shear adhesion strenght of dispersion

adhesives

(Adhesives for tiles,

continued)

TS EN 1324

EN 1324

Adhesives for tiles - Determination of

shear adhesion strenght of reaction resin

TS EN 12003

EN 12003

Office Furniture Office furniture- Work tables and desk-

Part 1: Dimensions

TS EN 527-1

EN 527-1

Office furniture - Work tables and desks -

Part 2: Mechanical safety requirements

TS EN 527-2

EN 527-2

Office furniture - Work tables and desks -

Part 3: Methods of test for the

determination of the stability and the

mechanical strength of the structure

TS EN 527-3

EN 527-3

Office furniture - Screens - Part 1:

Dimensions

TS EN 1023-1

EN 1023-1

Office furniture - Screens - Part 2:

Mechanical safety requirements

TS EN 1023-2

EN 1023-2

Office Furniture - Screens - Part 3: Test

methods

TS EN 1023-3

EN 1023-3

Office Furniture-Office work chair-Part

1:Dimensions-Determination of

dimensions

TS 5337-1 EN 1335-1

EN 1335-1

Office furniture - Office work chair - Part

3: Test methods

TS EN 1335-3

EN 1335-3

Office furniture - Office work chair - Part

2: Safety requirements

TS EN 1335-2

EN 1335-2

Office furniture - Visitors chairs TS EN 13761

EN 13761

Office furniture - Storage furniture - Part

2: Safety requirements

TS EN 14073-2

EN 14073-2


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Office furniture - Storage furniture - Part

3: Test methods for the determination of

stability and strength of the structure

(Office Furniture,

continued)

TS EN 14073-3

EN 14073-3

Office furniture - Tables and desks and

storage furniture - Test methods for the

determination of strength and durability

of moving parts

TS EN 14074

EN 14074

Domestic Furniture Domestic and kitchen storage units and

worktops - Safety requirements and test

methods

TS EN 14749

EN 14749

Kitchen furniture - Co-ordinating sizes for

kitchen furniture and kitchen appliances

TS EN 1116

EN 1116

Domestic furniture - Beds and mattresses

- Safety requirements and test methods

TS EN 1725

EN 1725

Domestic furniture- Beds and mattresses-

Methods of measurement and

recommended tolerances

TS EN 1334

EN 1334

Domestic furniture- Beds and mattresses-

Test methods for the determination of

functional characteristics

TS EN 1957

EN 1957

Domestic furniture - Tables - Test

methods for determination of strength,

durability and stability

TS EN 1730

EN 1730

Domestic furniture - Seating - Test

methods for the determination of strength

and durability

TS EN 1728

EN 1728

Domestic furniture-Seating-Determination

of stability

TS EN 1022

EN 1022

Furniture Furniture - Children's cots and folding cots

for domestic use - Part 1: Safety

requirements

TS EN 716-1

EN 716-1

Furniture - Children's cots and folding cots

for domestic use - Part 2: Test methods

TS EN 716-2

EN 716-2


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Furniture- Cribs and cradles for domestic

use- Part 1: Safety requirements(Furniture,

continued)

TS EN 1130-1

EN 1130-1

Furniture- Cribs and cradles for domestic

use- Part 2: Test methods

TS EN 1130-2

EN 1130-2

Furniture - Bunk beds and high beds - Part

1: Safety, strength and durability

requirements

TS EN 747-1

EN 747-1

Furniture - Bunk beds and high beds - Part

2: Test methods

TS EN 747-2

EN 747-2

Furniture - Chairs and tables for

educational institutions - Part 1:

Functional dimensions

TS EN 1729-1

EN 1729-1

Furniture - Chairs and tables for

educational institutions - Part 2: Safety

requirements and test methods

TS EN 1729-2

EN 1729-2

Furniture- Ranked seating- Test methods

and requirements for strength and

durability

TS EN 12727

EN 12727

Furniture - Strength, durability and safety -

Requirements for non-domestic seating

TS EN 15373

EN 15373


Requirements for non-domestic tables

TS EN 15372

EN 15372

Furniture - Links for non- domestic seating

linked together in a row - Strength

requirements and test methods

TS EN 14703

EN 14703


Requirements for domestic seating

TS EN 12520

EN 12520


Requirements for domestic tables

TS EN 12521

EN 12521

Furniture - Assessment of surface

resistance to cold liquids

TS EN 12720

EN 12720


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested



resistance to wet heat(Furniture,

continued)

TS EN 12721

EN 12721


resistance to dry heat

TS EN 12722

EN 12722

Furniture - Assessment of the surface

gloss

TS EN 13722

EN 13722

Outdoor Furniture Outdoor furniture - Seating and tables for

camping, domestic and contract use - Part

1: General safety requirements

TS EN 581-1

EN 581-1

Outdoor furniture - Seating and tables for


2: Mechanical safety requirements and

test methods for seating

TS EN 581-2

EN 581-2

Outdoor furniture - Seating and tables for


3: Mechanical safety requirements and

test methods for tables

TS EN 581-3

EN 581-3

Dynamic Load for

Swing Equipment

Writing boards for educational institutions

- Ergonomic, technical and safety

requirements and their test methods

(Excluding Clause 7.5 and Clause 8.6)

TS EN 14434

EN 14434

Workbenches for

Laboratories

Workbenches for laboratories -

Dimensions, safety requirements and test

methods

TS EN 13150

EN 13150

Laboratory Furniture Laboratory furniture - Storage units for

laboratories - Requirements and test

methods

TS EN 14727

EN 14727

Children's High

Chairs

Children's high chairs - Part 1: Safety

requirements

TS EN 14988-1

EN 14988-1

Children's high chairs - Part 2: Test

methods

TS EN 14988-2

EN 14988-2


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Hardware for

Furniture

Hardware for furniture - Strength and

durability of extension elements and their

components

TS EN 15338

EN 15338


durability of slide fittings for sliding doors

and roll fronts

TS EN 15706

EN 15706


durability of hinges and their components

- Stays and hinges pivoting on a horizontal

axis

TS EN 15828

EN 15828


durability of hinges and their components

- Hinges pivoting on a vertical axis

TS EN 15570

EN 15570

Playground

Equipment and

Surfacing

Playground equipment and surfacing -

Part 2: Additional specific safety

requirements and test methods for swings

-Clause 4.6 Impact attenuation of swing

seats

-Clause 4.7 Dynamic load for swing

equipment

TS EN 1176-2

EN 1176-2

Impact attenuating playground surfacing -

Determination of critical fall height

TS EN 1177

EN 1177

Natural stones Determination of breaking load at dowel

hole

TS EN 13364

EN 13364

Determination of resistance to ageing by

thermal shock

TS EN 14066

EN 14066

Determination of real density and

apparent density, and of total and open

porosity (except real density)

TS EN 1936

EN 1936

Determination of water vapour

transmission properties

TS EN ISO 12572

EN ISO 12572


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Aggregates-

- Concrete

Aggregates

- Aggregates for

bituminous mixtures

and surface

treatments for


other traficked

areas

- Aggregates for

unbound and

hydraulically bound


civil engineering

work and road

construction

- Aggregates for

railway ballast

- Aggregates for

mortar

Tests for thermal and weathering

properties of aggregates: Determination

of resistance to thermal shock

TS EN 1367-5

EN 1367-5

Determination of shell content -

Percentage of shells in coarse aggregates

TS EN 933-7

EN 933-7

Determination of resistance to freezing

and thawing

TS EN 1367-1

EN 1367-1

Determination of the polished stone value TS EN 1097-8

EN 1097-8

Determination of percentage of crushed

and broken surfaces in coarse aggregate

particles

TS EN 933-5

EN 933-5

Flow coefficient of aggregates TS EN 933-6

EN 933-6


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Liquid-applied water

impermeable

products for use

beneath

ceramic tiling

bonded with

adhesives

Initial tensile adhesion strength TS EN 14891

EN 14891

Tensile adhesion strength after water

contact

TS EN 14891

EN 14891

Tensile adhesion strength after heat

ageing

TS EN 14891

EN 14891

Tensile adhesion strength after

freeze-thaw cycles

TS EN 14891

EN 14891

Tensile adhesion strength after contact

with lime water

TS EN 14891

EN 14891

Waterproofing TS EN 14891

EN 14891

Crack bridging ability under standard

conditions

TS EN 14891

EN 14891

FOOD LABORATORY

Cereal and Nuts

Products

Determination of Acidity in Extracted Oil TS 2383

Cereal and Cereal

Products

Determination of Moisture Content

(Reference Method)

TS EN ISO 712

ISO 712

Cereals, pulses and

by-products

Determination of Ash Yield by Incineration TS EN ISO 2171

ISO 2171

Honey Determination of invert sugar TS 3036 Clause 5.3.7

Determination of Free Acidity TS 13360

Determination of Water Insoluble Solid

Content

TS 3036 Clause 5.3.11


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Determination of 5-Hydroxymethylfurfural

Content of Honey - High Performance

Liquid Chromatography (HPLC) Method

(Honey, continued) TS 13356

Spices and

Condiment Herbs

Determination of Total Ash Content TS 2131 ISO 928

ISO 928

Fruit and Vegetable

Products

Determination of 5-Hydroxymethylfurfural

(5-HMF) Content

TS 6178 ISO 7466

ISO 7466

Tea Determination of Moisture Content TS 1562

ISO 1573

Determination of Total Ash Content TS 1564

ISO 1575

Determination of Water Soluble Ash and

Water Insoluble Ash

TS 1565

ISO 1576

Determination of Alkalinity of Water

Souble Ash

TS 1567

ISO 1578

Determination of Water Extract TS ISO 9768

ISO 9768

Vegetable Fats and

Oils

Determination of Acid Value and Acidity TS EN ISO 660

EN ISO 660

Determination of Peroxide Value -

Iodometric (Visual) Endpoint

Determination

TS EN ISO 3960

EN ISO 3960

Analysis of Methyl Esters of Fatty Acids by

Gas Cromatography

TS 4664 EN ISO 5508

EN ISO 5508

TS EN ISO 12966-2

EN ISO 12966-2

Milk and Milk

Products

Enumeration of Presumptive Escherichia

coli Part 1: Most Probable Number

Technique

TS ISO 11866-1

ISO 11866-1

Enumeration of Colony-Forming Units of

Yeast and/or Moulds Colony-Count

Technique at 25°C

TS ISO 6611

ISO 6611


Accreditation Scope

TSE





Testing Method


in house methods)

Name of Test Tested


Food and animal

feeding stuffs

Horizontal Method for the Enumeration of

Coagulase Positive Staphylococci

(Staphylococcus Aureus and Other

Species) Part 1: Technique Using

Baird-Parker Agar Medium

TS 6582-1 EN ISO 6888-1

EN ISO 6888-1

Fruit and Vegetable

Products

Determination of Soluble Solids Content-

Refractometric Method

TS 4890

Determination of Titratable Acidity TS 1125 ISO 750

ISO 750

Wheat Flour Determination of acidity TS 4500 cl. 5.3.8

Table olives Determination of Salts TS 774 Clause 2.3.2

Determination of Acidity TS 774 Clause 2.3.3

End of Scope

Dr. H. İbrahim ÇETİN

Secretary General

Annex of the certificate (Page 1/2)

Accreditation Scope / Additional assessment document for this scope : EA 2/17



TSE



AB-0001-TAddress:

Website

E-Mail

Fax

PhoneNecatibey cad. 112 Bakanlıklar

06100

ANKARA / TÜRKİYE

: 0 312 416 62 00

: 0 312 416 66 11

: [email protected]

: www.tse.org.tr

Regulation (EU) No 305/2011 Construction Products

Commission

Decision

Product Family, Product

/ Intended Use

Technical Requirements,

Standards / Body Function

As a Testing Laboratory

CONSTRUCTION MATERIALS LABORATORY (ANKARA)

97/808/EC Floorings (2/2) :

- Rigid flooring products

(a) Components: paving units, tiles,

mosaics, parquet, decking of mesh or

sheet, floor gratings, rigid laminated

floorings, wood based products (for

internal uses including enclosed public

transport premises).

EN 12057

Test Lab. (System 3)

98/437/EC Internal wall and ceiling finishing (2/5):

-Tiles (internal or external finishes in

walls or ceilings subject to regulations

about "Safety in Use")

EN 12057

Test Lab.(System 3)

98/437/EC Internal and external wall and ceiling

finishes (4/5) :

- Cladding slabs (as internal or external

finishes in walls or ceilings, as relevant,

subject to regulations on dangerous

substances).

EN 1469

Test Lab. (System 3)

99/90/EC Membranes (1/3):

- Damp proof courses (in buildings)

EN 14891

EN 14891/AC

Test Lab.(System 3)

Accreditation Scope / Additional assessment document for this scope : EA 2/17

Annex of the certificate (Page 2/2)



TSE



Regulation (EU) No 305/2011 Construction Products

AB-0001-T

Technical Requirements,

Standards / Body Function

Product Family, Product

/ Intended Use Commission

Decision

99/470/EC Construction adhesives (1/2):

- Adhesives for tiles (for internal and

external uses in buildingsand other civil

engineering works)

EN 12004+A1

Test Lab.(System 3)

End of Scope

Dr. H. İbrahim ÇETİN

Secretary General

tse deney ve kalİbrasyon merkezİ … of the certificate (page 2/40) accreditation scope tse deney...

Documents