tsl-500_engl
TRANSCRIPT
-
8/8/2019 TSL-500_engl
1/2
The high efficientturning center for the single-unit
and serial production
Efficient, robust andversatile.
33 kW AC-drivePowered tools with spindle orientation
Feed force 14 kN (100 %)74 mm draw bar bore / 4200 rpm
Quality managementDQS-certified according toDIN EN ISO 9001
CNC-Lathe
Powered by SAEILO
-
8/8/2019 TSL-500_engl
2/2
Technical data CONTUR TSL-500 Turning Center
Subject to change due to technical progress. Errors and omissions excepted.
Powered by SAEILO
SAEILO Deutschland GmbHWerkzeugmaschinen
Hauptstrae 68, D-35585 WetzlarTel.: 0049 (6446) 9247-0, Fax: 0049 (6446) 9247-33eMail: [email protected]
Internet: www.saeilo.de
Representative:
Konzept&Design:
mark-upMarketingDesignGmbH
Instead of the 12-station SAUTER-turret withpowered tools (Standard) the TSL-500 can beequipped with the low cost 8-station Duplomatik-turret as an option.
Modern technology for high performance:
60 slant bed Control SIEMENS 810 D with ShopTurn Main spindle motor with 33 kW
SIEMENS main spindle and feed motors Z-axis 14 kN feed force Complete electrical package by SIEMENS SAUTER VDI-40 turret with powered tools Rigid roller guides RHM chuck and cylinder Independent swiveling operator panel
Standard equipment:
SINUMERIK 810 D 12-station turret VDI Powered tools Hydraulic type 3-jaw chuck 10 Hydraulic tailstock Coolant device Central Lubrication Work light Security equipment according to CE
Optional accessories:
Chip conveyors Bar loader Part chatcher Tool preseter Without powered tools Spindle bore 92/117 mm Steady Rest Automatic pneumatic door
Further optional accessories on request
High performance by powerful AC-drive.
Work area Turning diameter over bed 630 mmMax. turning diameter 400 mmSwing over cross slide 405 mm
Max. turning length 750/1500 mmMain spindle Spindle nose DIN 55026, A2-8
Spindle speed max. 4200/3000 rpmChuck bore 75 mmSpindle bore 92 mmBearing diameter 140 mmChuck diameter (recommended) 250 mm
Tool carrier Type Disc-type turretNumber of tool stations 12 VDI (Option: 8)Turret type DIN 69880 VDI 40
Rapid traverse X-/Z-axis 18/24 m/min
Travel X-axis 270 mm Z-axis 905 mm
Tailstock Quill diameter 95 mm(Option) Qill travel 125 mm
Inside taper of quill MK-5
Drives Spindle motor (100/40 %) 22/33 kW X-axis servo motor 1 kW Z-axis servo motor 2,8 kW Z-feed torque (100 %) 14 kN
Equipment Hydraulic tank 40 Ltr.
Coolant tank 120 Ltr.
Dimensions Length x width 3300/4050x1740 mmHeight 1900 mm
Weight Net weight approx. 5250/6620 kg
CNC Turning Center
TSL-500