tugas kromatografi hplc
DESCRIPTION
HPLCTRANSCRIPT
MAKALAH KROMATOGRAFI
HPLC
(High Performance Liquid Chromatography)
Disusun oleh:
ALVIAN (1043050011)MARTINA (1043050024)YUS MARDINA (1043050068)
WENNY BUDIYANTI (1043050037)
Fakultas Farmasi
Universitas 17 Agustus 1945
Jakarta
2013
Daftar Obat-obat dari abjad K dan L yang dapat di identifikasi dengan HPLC dengan campuran Mobile fase, Kolom dan detector serta keterangan laju alir, volume injeksi dan waktu retensi:
Nama Zat Mobile fase Kolom Detektor KeteranganKetamine Hcl asetonitril R 1 dan
air R (25:75) dan tambahkan 4 mL asam asetat R, lalu larutkan 0,95 g natrium hexanesulfonate R dalam 1 Liter air
Ukuran: l = 0.125 m, Ø = 4.0 mm;
Stationary phase: octadecylsilyl silica gel atau kolom C18 (3 to 10 µm)
UV at 215 nm Flow rate : 1.0 mL/min.
Volume Injection 20 µL.
Retention time ketamine Hcl = sekitar 30 menit (10 x dari ketamine)
Retention time ketamine = sekitar 3 menit
Ketobemidone Hcl Acetonitrile R(20:80 V/V).
Ukuran: l = 0.25 m, Ø = 4.6 mm;
Stationary phase: phenylhexylsilyl silica gel (5 µm)
Suhu : 40 °C.
Uv at 278 nm Flow rate : 1.5 mL/min.
Volume Injection 20 µL
Retention time ketobemidone Hcl = sekitar 45 menit (4.5 x dari ketobemidone)
Retention time ketobemidone = sekitar 10 menit
Ketoconazole mobile phase A (5: 95 V/V) : (acetonitrile R1, 3.4 g/L) : (tetrabutylammonium hydrogen sulfate R )
Mobile phase B (50:50 V/V) : (acetonitrile R1, 3.4 g/L) : (tetrabutylammonium hydrogen
Ukuran : l = 0.10 m, Ø = 4.6 mm;
Stationary phase: octadecylsilyl silica gel atau kolom C18 (3µm)
Uv at 220 nm Flow rate : 2 mL/min.
Volume Injection 10 µL
Retention time Ketoconazole = sekitar 6 min
sulfate R)
Kafein KH2PO4 0,01 M : Metanol : asetonitrik : isopropyl Alkohol (420: 20: 30: 30) dan dihantarkan secara isokratik
µBondapack C8 (250 mm x 4,6 mm i.d; ukuran partikel 5 µm, yang dielngkapi dengan kolom pengaman Bondapak C18 10 mikron
UV at 215 nm Flow rate : 1 mL/min.
Volume Injection 20 µL
Kalsium pantotenat Metanol : Asam fosfat pH 2,5( 65:35)
Hypersil ODS 5 µm( 25 cm x 0,46 cm i.d)
UV at 214 nm Flow rate : 0,7 mL/min.
Volume Injection 20 µL
Karbamazepin Asetonitril : Metanol: air ( 18:19:63)
CAPCELL PAK C18 5 µm ( 25 cmx 0,39 cm i.d)
UV at 210 nm Flow rate : 1,2 mL/min.
Volume Injection 20 µL
Levocarnitine tablet acetonitrile dan pH 4,5 phosphat buffer 0,005M (65:35).
Kolom 5 µm (3,9 mm x 30 cm) packing L8
UV at 205 nm Flow rate : 1 mL/min.
Volume Injection 20 µLLacidipine Tablets Etanol absolute : n-
hexane (3:1)stainless steel column (25 cm x 4.6 mm) dikemas dengan cyanosilyl silica gel (5 µm) (Spherisorb CN).
UV at 240 nm Flow rate : 2 mL/min.
Volume Injection 20 µL
α Lipoic Acid metanol : larutan phospate 0,005 M : acetonitrile ( 1160: 920: 180) dengan Phosphoric acid pH 3,5 - 3,7
C18 5 µm (4,6 mm x 25 cm) packing L1
Suhu : 35 °C.
UV at 215 nm Flow rate : 1,2 mL/min.
Volume Injection 20 µL
Lamotrigine Mobile phase A: triethylamine R dan 2.7 g/L larutan buffer potassium dihydrogen phosphate R (1 : 150) ; dengan pH 2.0 phosphoric acid R
Mobile phase B : acetonitril
Mobile phase A :
Ukuran: l = 0.15 m, Ø = 4.6 mm;
Stationary phase: base-deactivated end-capped octadecylsilyl silica gel (5 µm);
Suhu : 35 °C.
UV at 210 nm Flow rate : 1 mL/min.
Volume Injection 10 µL
Retention time = sekitar 5,5 menit
Mobile phase B (35:65) (V/V).
Leflunomide triethylamine : air : acetonitrile ( 5 : 650: 350)
dengan pH 3.4 ± 0.1 phosphoric acid R
Ukuran: l = 0.125 m, Ø = 4.0 mm;
Stationary phase: end-capped octadecylsilyl silica gel (5 µm).
UV at 210 nm. Flow rate 1.0 mL/min.
Volume Injection 20 µL
retention time = sekitar 25 menit
Levocarnitine Larutan sodium hydroxide : acetonitrile R. (35:65)
Buffer 6.81 g/L Larutan potassium dihydrogen phosphate dengan pH 4,7
Ukuran: l = 0.30 m, Ø = 3.9 mm;
Stationary phase: aminopropylmethylsilyl silica gel (10 µm);
Suhu : 30 °C.
UV at 205 nm. Flow rate 1 mL/min.
Volume Injection 25 µL
Retention time = sekitar 9.6 menit.
Lerkanidipin Asetonitril : buffer fosfat 0,01 M dengan pH 4 ( 45:55)
Symmetry C18 ( 150 mm x 3,9 mm i.d; ukuran partikel 5 µm).
Kolom pengaman Bondapak C18 ( 30 mm x 4,6 mm i.d; ukuran partikel 5 µm)
Kolom dijaga pada suhu : 25 °C
UV at 356 nm Flow rate 1 mL/min.
Volume Injection 25 µL Rheodyne
Retention time = sekitar 5 menit.
Lidokain Larutan natrium dodesil sulfat dalam air 0,075 M dan isopropanol 7,5 %
Zorbax C18 ( 12,5 mm x 4,6 mm i.d; ukuran partikel 5 µm).
UV at 210 nm Flow rate 1 mL/min.
Volume Injection 20 µL
Lisinopril Fase gerak A: asetonitril dan kalium dihidrogen phosphate 25 mM dengan pH 5 ( 7:93)Fase gerak B :
X-Terra C18 ( 20 mm x 4,6 mm i.d; ukuran partikel 3,5 µm).
UV at 215 nm Flow rate 1 mL/min.
Volume Injection 20 µL
asetonitril dan kalium dihidrogen phosphate 25 mM ( 50:50)
Loratadin Larutan buffer natrium dihidrogen fosfat dalam air 0,025 M dengan pH diatur 3,7 dengan asam ortho-fosfat) : asetonitril ( 80:20 )
Symmetry C18 ( 250 mm x 4,6 mm i.d; ukuran partikel 5 µm).
Photodiode-array 225 nm
Flow rate 1 mL/min.
Volume Injection 10 µL
Lumafantrin Metanol : asam trifluoroasetat 0,05 % (80:20)
Symmetry C18 ( 250 mm x 4,6 mm i.d; ukuran partikel 5 µm).Suhu: 30 °C.
Photodiode-array 335 nm
Flow rate 1 mL/min.
Volume Injection 20 µL
Lovastatin Larutan 1.1 g/L phosphoric acid R dan acetonitrile R1 (7:13)
size: l = 0.25 m, Ø = 4.6 mm
Stationary phase: C18
octylsilyl silica gel (5 µm)
Suhu : 40 °C.
UV at 200 nm. Flow rate 1.5 mL/min.
Volume Injection 10 µL.
Retention time = sekitar 5 menit
DAFTAR PUSTAKA
Website: http://bp2012.infostar.com.cn/Bp2012.aspx?tab=a-z+index
British Pharmacopoeia 2012 online
Ebook : United States Pharmacopeial (USP 30 – NF 25)