ujili - wesco platform ladder load capacity ... are knee-braced and triple riveted full set of rear...
TRANSCRIPT
MODEL T7400 SeriesSTYLE MULTI-USE TWIN STEPLADDER"
LOAD CAPACITYOAfl ||*o Combined weightOUU IDSi ol user and materials.Extra Heavy Duty/Professional UseTYPE IA Orange electrically
non-conductiveside rails
Thick —side plates:
Shoulder bolt and locknut on top hinge;4 solid aluminum rivetsattach top to each rail
Extra heavy dutyinternal spreaders
Slip-resistantTraction-Tred®extra wide stepsare knee-bracedand triple riveted
Heavy gaugealuminumextruded top
1— Back-up aluminumplates reinforce alltop connectors
Non-conductive rail shields reinforcebottom ends for increased resistanceto damageCombination rail end shield and —foot with slip-resistant foot pad
Every rivet backed up by metal part or washer to protect rails
SPECIFICATIONSModel
No,T7404T7406T740817410T7412T7414T7416T7418**T7420**
Size4'6'8'
10 '1 2 '1 4 '16 '1 8 '20'
Approx.Width
21-1 /8"24-5/8"28-1/8"31 -5/8"35-1/8"38-5/8"41 -7/8"45-1/4"48-5/8"
Approx.Spread36-1/8"50-1/8"64-1/8"78-1/4"92-1/4"
106-1/4"120-1/4"136-1/8"150-1 /8"
Approx.Cu. Ft.
Per Unit4.78.312.617.723.631,939.748.157.4
Approx,ShippingWt. Lbs.
24.034.045.056,070,084,0
102.0130.0152.0
ttDesigned for one or two person jobs. Note:load per side, including person and materials,
DIMENSIONS
When used as a double stepladder, the maximum;, shall not exceed the duty rating of ladder.
Top: 8 - 1 / 4 " x 13-3/4"Steps: 3-1/4" wide
Rails: 3-3/8" wideFlange: 1-3/16" wide
UJiliMODEL P7400 SeriesSTYLE PLATFORM LADDER
LOAD CAPACITYOAA 11* A Combined weightOUv lUOi of user and materials.Extra Heavy Duty/Professional UseTYPE IA
Thick ——side plates
Shoulder bolt and locknut on top hinge;4 solid aluminum rivetsattach top to each front rail
Large platform providessecure and comfortablework area
Orange electricallynon-conductiveside rails
Safety guard railencourages properladder use
— Back-up platesreinforce all topconnectors
Slip-resistantTraction-Tred9
extra wide stepsare knee-bracedand triple riveted
Full set of rearhorizontals spacedone per foot
rNon-conductive rail shields reinforcebottom ends for increased resistanceto damage
Combination rail end shield andfoot with slip-resistant foot pad Model P7404
Every rivet backed up by metal part or washer to protect railsInternal aluminum spreaders on 8' and 10' models
SPECIFICATIONS
ModelNo,
P7403P7404P7406P7408P7410
Heightto
Platform3'4'6'8'10 '
Size5'6'8'
10'1 2 '
Approx.Width
23-1/4"24-5/8"28-1/8"31-5/8"35-1/8"
Approx.Spread36-3/4"42-7/8"55-1/4"67-1/2"79-7/8"
Approx,Cu, Ft,
Per Unit4,25.7
10.414.619.5
Approx.SnippingWt. Lbs,
23.027.035.046.057.0
DIMENSIONSPlatform: 1 2 - 1 / 2 " x 1 5 "
Front Rails: 3-3/8" wideFlange: 1 -3/16" wide
Steps: 3-1/4" wideRear Rails: 2" wide
Flange: 1 -3 /16 " wide
ProductCertificationsANSI
MANUFACTURER CERTIFIESCONFORMANT TO
STANDARDS
AMERICAN NATIONALSTANDARDS INSTITUTE
PRODUCT LINES MEET OR EXCEED ANSI CODEFiberglass Ladders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A14.5 (1992)Aluminum Ladders . . . . , , . , . . . , . . . . . . , . , , . . . , . . . . . . . . A14.2 (1990)Wood Ladders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A 1 4 . 1 (1994)Ladder Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A10.8 (1988)Extension Planks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A 1 0 . 8 (1988)
OCCUPATIONAL SAFETY ANDHEALTH ADMINISTRATION CODE
All Type II, I and IA fiberglass, aluminum and wood ladders, ladder jacks andextension planks meet or exceed code. OSHA CODE applies to ladders used inthe workplace. Werner Ladder Co. recommends Type II or heavier duty ratedladders for these applications.
UNDERWRITERSLABORATORY CODE
SERIES COMPLY WITH U.L. STANDARDS AS NOTED:Aluminum Ladders...............................................................................................AII SeriesLadder Jacks.............,,,....,,..,.,.................,.,,,..,,..........,..................,,,,.,.,..............All SeriesAluminum Extension Planks...............................................................................All SeriesFiberglass Ladders................................................................,........NO U.L. STANDARDS
NOTE: No ANSI, OSHA or U.L Standards have been written for atticladders for overhead access.
SAFETY//SWIART•$^._S £ w
**MtAV*
All Werner fiberglass ladders have electricallynon-conductive rails. This is a great benefitfor those working near electricity. Fiberglassrails also maintain a smooth surface evenafter weathering,
Werner ladders areproudly made in U.S.A.
CORPORATE HEADQUARTERSWerner Ladder Co.93 Werner RoadGreenville, PA 16125-9499Tel. (724)588-8600 • FAX (724) 588-0315
How to Placean OrderCall our Customer Service Department at (724) 588-8600from 8:00 AM to 5:00 PM (EST), Monday through Fridayor FAX your order to (724) 588-0315.
Note: All Special Order items are designated with a double asterisk(Example: 7516-2**\"^ i
Table of ContentsSeries
Fiberglass Stepladders5900 / 5900S Series . . , , , . . , , , .P5900 Series (Platform Ladders) ...6002 Model (Step Stool) , , , . . . . . .6000 / 6000S Series . . . , . . , . . , ,T6000 Series (Twin Stepladders) .,,PT6000-4C Series (Stockr's Ladders8
T6202 Model (Step Stool) , . . , , , . .6200 Series , , . . . , . . . . , . . , , , . .7200 Series , . . , , , . . , , , . . , . . . ,7400 Series , . . , , , . . , , , . , , , . , ,PT7400-4C Series (Stockr's Ladders8
Page No.
.1
.1
.2,2,3.3.4.4.5,5,6
T7200 Series [Twin Stepladders) , , . , , . . , , , . . , , .6T7400 Series (Twin Stepladders) . . . . . . . . . . . . . . . 7P7400 Series (Platform Ladders) . . . . . . . . . . . . . . . 7Comparison Chart , . . , , . . , . , , , , . . , , , . . , , . . , . 8E7400 Series (Trestle Ladders) , , , . . , , . . . , . . . , .97800 Series (Step/Extension Ladders) . . . . . , . , , , .9
Fiberglass Extension LaddersD5900-2 Series . , , . . , , . . . , , . . , , , . . , . . . , . . 1 0D6000-2 Series , , . . , , , . . , . . . . . . , . , . . , , , . , 1 0D6200-1 / D6200-2 Series . . , , , . . . . . . . . . , , ,117100-1 / 7100-2 Series , . . . , , . . . , . . . , . . , , , 1 1D7100-2 Series . , , , . . , , . . . , . . . , . . , , , . . , , . 1 2D7500-2 Series , , . . , , . . . , , . . , , , . . , , . . , . . , 1 2Comparison Chart . . , , , . . , . . . . , . . . , . . . . , . . , 1 3
Werner Co. - the world's leading manufacturefa.0f^..
Werner is a state-of-the-art fully integrated manufacturerand distributor of fiberglass, aluminum and wood climbingproducts, Control of every step of the manufacturing processensures quality and allows flexibility to serve the needsof our customers.
Standard of the IndustryWerner ladders are made to last, Our products are backedby over 50 years of product design, testing and evaluationexperience. We begin with the best quality raw materials andexpertly manufacture those materials into high-strength laddersdesigned to perform year after year. We convert raw materials,such as aluminum ingot and fiberglass ravings, into the siderails, rungs and other parts used to make ladders, stages,scaffolds and accessories,
All Werner ladders are designed and manufactured to thesame rigorous quality standards and with a common goal ofbuilding the safest climbing equipment possible. Our productsare designed and manufactured to meet or exceed OSHAand ANSI requirements,
Werner offers ladders made from fiberglass,aluminum and wood.
FiberglassWerner was the driving force behind the development offiberglass ladder products. Fiberglass ladders have becomethe leading choice for both consumers and professionals due totheir great value, appearance and suitability for a wide range ofapplications, Werner uses a proprietary process to manufacturefiberglass reinforced ladder rails, Glassravings and structural glass mat areimpregnated with a thermoset resin andthen pulled through a temperature-controlled die to create finished ladderrail, Fiberglass pultrusions are made innumerous colors, are electrically andthermally non-conductive and haveexcellent structural and weatheringproperties, Werner's equipment isdesigned in-house specifically forladder rail production to offer the bestquality and control,
>C
TechnologicallyAdvanced Material:Multiple layers of uni-directional glass rovingsand multi-directionalglass structural matcreate the strong, durableWerner fiberglass rail.