USB-HiproTraining Course

——Marketing Dept

Front view of digital Hearing Aid Programmer USB

Rear view of digital Hearing Aid Programmer USB

Connect to the PC by supplied USB (Universal Serial Bus) cable, there will be an interface of “Found New hardware Wizard”.

Place the installation CD in the CD drive.

Select “install the software accords to list or pre-positioned place” on the dialog box ， click “Next”.

Select “Include this location in the search ”, Browse the folder.

Click “next”, the installation will start automatically. (Note: There will be a dialog box when start installing automatically, please select ‘YES’ to confirm it. You need to install the drive twice.

Now there will be a progress indicator frame as the following picture.

Click “Finish ”, the USB-HIPRO is installed successfully.

Go into ‘my computer’ on the computer desktop.

Right click“My Computer”, then select "properties" .

1 、 Connecting the USB-HIPRO to the PC

Select the hardware dialog box, click ‘Device Manager’.

Change COM3 to COM1 of USB

Click “properties”

Click “Port Settings”

Click “Advanced”

Change to “COM1”

Click “OK”

2 、 HIPRO Test

Click “Test”

HIPRO Test is OK

Thank you !