user guide to cellmaker

内部公开▲

本文中的所有信息归中兴通讯股份有限公司所有，未经允许，不得外传第 1 / 13 页

THE USER GUIDE TO

MAPINFO PLUS-IN CELLMAKER

Made by: Haifeng Zhao

Network Planning and Simulation Department

CDMA Division

ZTE CORPORATION

内部公开▲


1 Effect Drawing The following is the site information effect drawing based on MapInfo

made by the CellMaker

内部公开▲


2 How to use it 2.1 Preparation

First we need to make a site information file, and the format is as the following.

Then copy all the site information to a *.txt format file as the following:

内部公开▲


After the preparation is done, double clicks on the shortcut of CellMaker, and it will automatically open MapInfo. And now we can see that the plus-in tool is already on the main menu of MapInfo as the name of Cellmaker.

内部公开▲


2.2 Create site information

File---->open

Choosing the Delimited ASCII(*.txt) file format, and open the site file

内部公开▲


After open the site file, choosing the Use First Line for Column in the pop-up Delimited ASCII Information window, the press OK

内部公开▲


Table---->Create Points

In the pop-up window for Create Points, click on Projection button

In the Choose Projection window, choosing the correct projection

mode, e.g. WGS84, press OK

内部公开▲


File---->Close All

CellMaker---->Draw Sector Symbols

内部公开▲


Choosing the .TAB site information file, which is converted from the .Txt file, and in the pop-up Sector Builder window select Sectorders, then press OK

内部公开▲


The CellMaker can maximally support 6 sectors sites, but generally the sectors for each BTS site are not more than 3, so we are mainly focusing on the sector A, B and C , and for the Sector designator, we choose them from V1 to V3(sometimes it will be configured automatically )

内部公开▲


For the sector’s color, we can edit it according to our use manner.

Effect drawing of site information based on MapInfo

内部公开▲


Display the site ID.

内部公开▲


user guide to cellmaker

Documents