user manual...ledsmaster technology co., ltd. user manual 600w led street light ledsmaster...
TRANSCRIPT
深圳市丰睿光电科技有限公司 Ledsmaster Technology Co., Ltd.
User Manual
600W led Street Light
Ledsmaster Technology Co., Ltd
Web: www.ledsmaster.com
Email: [email protected]
Tel: 86-755-36938328 Mobile:86-13530998208
Skype:ledsmaster twitter:ledsmaster8 Facebook:ledsmaster
深圳市丰睿光电科技有限公司 Ledsmaster Technology Co., Ltd.
To customers
▶Many thanks for buying our product.
▶Please read this user manual carefully before using.
▶Please kindly keep this user manual well.
Caution:
▶In case of any damage or accident happend,customers who use this lamp please don’t take apart
the lamp or change any part of it.
▶If there is any un-normal condition after installation,such as smoking,peculiar smell,noise,etc may
cause electric shock or fire hazard,please make power off immediately and contact with your
installation company.Customers shouldn’t disassemble the lamp by themselves at random.
▶Please ask professional installation company or electrical engineers to install the lamp,follow the
user manual strictly.Any improper installation may cause falling,electric shock or fire hazard.
▶Use clean soft cloth dip soap water for cleaning,then wipe with dry soft cloth.Gasoline,acetone or
any other organic solvent is not allowed in case of corroding the lamp body.
▶Please follow the wiring diagram strictly,any mistake may cause electric shock or damage.
Electric light source parameters:
ITEM NO LS-STN-600 Power 600W
Light Source Bridgelux Input Voltage 90-305VAC 50-60HZ
Power Factor (PF) ≥0.95 Power Efficiency ≥90%
Color Index(CRI) 80 Color Temp
2700-3500K
5000-6500K
6500-7500K
Luminous Flux (Typ) 96000lm LED Luminous
Efficiency 160lm / Watt
Work Temperature: - 25 °C ~ 55 °C Storage Temperature - 40 ° C ~ 80 °C
Working Humidity 10 % ~ 90 % RH IP Rating IP66
Life Span ≥80000 hours Light
Attenuation(80000h) 30%
Light Body Size
(L*W*H) 895*397*138mm Lamp Net Weight(KG) 18.5
Package Size
(L*W*H) 895*397*138mm Total Weight(KG) 25
深圳市丰睿光电科技有限公司 Ledsmaster Technology Co., Ltd.
Installation procedure:
1. Connect your AC(90-305V) output power to the AC input of our products together
ACL: Connect the Brown input
ACN: Connect the Blue input
Grount Line: Connect the Green/Yellow input
2. Install the light to the pole Installation pipe diameter 60MM
深圳市丰睿光电科技有限公司 Ledsmaster Technology Co., Ltd. 3.Install the light to the pole ,then use a 6MM socket head wrench to tight the six pieces bolts.the
tightening torque is 16N.M-20N.M
4.After the street lights installed. Then to use a wrench to loosen two bolts to adjust the angle of
the lights and ground
深圳市丰睿光电科技有限公司 Ledsmaster Technology Co., Ltd.
5.Adjusting the angle between the lights and the ground while adjusted to the suitable
one.(adjustable angle range above:36°below:18°)then tighten two bolts
Remark:
1. Make sure power off when installing or changing spare parts;
2. Make sure local working voltage could match the lamp.