v. 7/17 - alcom...2016/03/09 · picmg 2.16 et switching backplane picmg 2.30 compactpci plusio...
TRANSCRIPT
V. 7/17
Singel 3 | B-2550 Kontich | Belgium | Tel. +32 (0)3 458 30 33 | [email protected] | www.alcom.be
Rivium 1e straat 52 | 2909 LE Capelle aan den Ijssel | The Netherlands | Tel. +31 (0)10 288 25 00 | [email protected] | www.alcom.nl
P 1
Table of Contents
CompactPCI ................................................................................................................................................................................................................... P 10
6U CompactPCI Processor Blades ............................................................................................................................................................................ P 12
6U CompactPCI Rear Transition Modules ............................................................................................................................................................... P 14
3U CompactPCI Processor Blades .......................................................................................................................................................................... P 16
6U CompactPCI Chassis ............................................................................................................................................................................................. P 18
3U CompactPCI Chassis ............................................................................................................................................................................................. P 19
CompactPCI Peripherals (Switches, Power Supplies, Backplanes, PMCs, XMCs) ............................................................................................. P 20
Industrial Automation ................................................................................................................................................................................................... P 6
Rail Transport ................................................................................................................................................................................................................. P 8
A Global Company ......................................................................................................................................................................................................... P 2
Applications
About ADLINK
Selection Guides
P 2 P 3
Building Forward Together
A Global Company
ADLINK, a manufacturer of embedded computing technology, leads the field with integration of computing power, rugged design, high availability, and industrial I/O. Dedicated to test & measurement, industrial automation, defense and aerospace, gaming, communications, medical, and transportation applications, ADLINK has made a name for itself providing reliable products of superior quality for cost-effective solutions, allowing our customers around the world to significantly reduce time-to-market burdens while increasing their competitive edge.
By providing leading-edge application-ready platforms and industrial building blocks, ADLINK empowers our customers, allowing them to minimize total cost of ownership (TOC) with customization and system integration advantages, keeping manufacturing costs low and extending product lifecycles.
ADLINK is a Premier Member of the Intel® Internet of Things Solutions Alliance and is active in several standards organizations, including the PCI Industrial Computer Manufacturers Group (PICMG), the PXI Systems Alliance (PXISA), and the Standardization Group for Embedded Technologies (SGET).
ADLINK is a global company with headquarters in Taiwan; manufacturing in Taiwan and China; R&D and integration in Taiwan, China, the US, and Germany; and an extensive network of worldwide sales and support offices. ADLINK is ISO-9001, ISO-14001, ISO-13485 and TL9000 certified and is publicly traded on the TAIEX Taiwan Stock Exchange (stock code: 6166). ADLINK products are currently available in over 40 countries across 5 continents, supported by worldwide distribution networks and offices and over 1,600 employees.
Products and Services
Measurement & AutomationADLINK’s is dedicated to providing reliable, top quality products for industrial I/O control, motion control, digital imaging, data acquisition, and modular instrument applications. Our comprehensive portfolio of measurement and automation products, application ready platforms, and easy-to-use software packages, with integrated value-added service, continually meet and exceed customer requirements for industrial automation systems, machine vision systems, and automated test and measurement equipment.
PXI & Modular Instruments | Data Acquisition | Machine Vision | GPIB & Bus Expansion | Motion Control | Distributed I/O | Fanless Embedded Computers | Handheld computers
Modular Computing With the combined experience and technical knowledge of ADLINK, Ampro Computers and LiPPERT Embedded Computers, ADLINK is able to provide a wide range of Computer-on-Modules and Small Form Factor (SFF) Single Board Computers. Our Extreme Rugged product lines have wide operating temperature ranges and meet MIL-STD shock and vibration specifications.
Computer-on-Modules:COM Express | SMARC | Qseven | ETX
SFF Single Board Computers :PCI/104 | PC/104-Plus | PCI/104-Express | Mini-ITX
Being a holistic solution, ADLINK's SEMA cloud offers users the entire infrastructure required. Customers do not need to develop their own cloud solution, avoiding laborious checking of hardware compatibility, finding a suitable cloud server, implementing data encryption or developing proprietary communication protocols.
In addition to individual devices, it includes encrypted data transfer to our cloud infrastructure and an intuitive graphical user interface (GUI) to monitor and/or control devices from any location at any time via the Internet.
Industrial Grade Cloud Solution : SEMA Cloud
Embedded ComputingADLINK works closely with Intel® to ensure that we develop and introduce innovative computing technologies by implementing embedded computing roadmaps and selecting computer solutions that best fit our target markets. This enables ADLINK to provide the highest quality and performance products with the long life cycles required by our embedded computing customers.
Our range of products includes:
Network AppliancesExtreme Outdoor ServersMedia Cloud ServersAdvancedTCA
6U/3U CompactPCI PlatformsVPX Blades and Development KitsExtreme Rugged SystemsEmbedded Flash Storage
Display & ComputingADLINK's display and computing product segment (DCPS) is committed to providing our customers the best user experience with products for Medical, Industrial, and Logistics applications, including panel PCs, touchscreen monitors, and tablets that meet the demanding requirements of these industries and provide ease of use and protection from extreme environmental hazards.
Idustrial Monitors and Panel Computers | Medical Monitors and Panel Computers | Rugged Tablets
P 4 P 5
Building Forward Together
To fulfill your requirement of high quality, cost-effective products, with quick time to market in product development, ADLINK has established and assembled a Design and Manufacturing Services team to cater to the specific demands that off-the-shelf products could not meet.
From embedded computers, data acquisition cards, and CompactPCI systems to related software packages, our DMS design team has the expertise to rapidly prototype upon the approval of finalized specifications. In addition, the winning of ISO-9001 certification ensures the exactitude of our research and development procedures with the highest product quality.
ADLINK owns and operates the manufacturing facilities in our Asia headquarters. Complete capabilities include our own PCB layout teams, SMT lines, system integration, and test capabilities. In short, ADLINK controls the whole manufacturing process, from layout and design to prototyping and volume production.
eRMAADLINK customers can send their RMA requests via our eRMA system. After obtaining an RMA number, you can track your RMA status online at any time.
RoHS Compliant ComputingADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive, which restricts the use of harmful substances such as lead, mercury and cadmium in new equipment.
Most end-user applications in which ADLINK products are used do not require RoHS compliance. However, ADLINK will actively work with customers whose products are not RoHS exempt under category 8 or category 9 classifications. Our lead-free production line and process, including solder paste, solder bar and process control parameters, has been developed and standardized in our manufacturing system.
Conflict Free Minerals PolicyADLINK will not knowingly procure material supplies and components that contain minerals that directly or indirectly finance or benefit armed groups in the Democratic Republic of Congo (DRC) or an adjoining country.
We urge our suppliers to support this policy in their own procurement guidelines and provide us with accurate country of origin information.
ADLINK shall:
Comply fully with requests from EICC-GeSI. Conduct a reasonable country of origin inquiry to clarify the origins of the Gold, Tantalum, Tungsten and Tin used in our products.
Establish reasonable objectives and targets with a goal of ascertaining and minimizing ADLINK's risk. With a goal of continuous improvement for our Conflict Free Minerals Program, develop a means to measure objectives and targets. ADLINK will also review, revise and report these measures, and overall program updates, on an annual basis.
Empower all employees, suppliers, vendors and contractors to take ownership in complying with the Conflict Free Minerals Policy and to escalate risks in the supply chain to management's attention.
Effectively communicate to all employees this Conflict Free Minerals Policy and our Conflict Free Minerals Program.
Ask An ExpertThis is the place to get help for ADLINK products. 'Ask an Expert' provides answers to commonly asked questions, or you can click on the 'Ask a Question' tab to contact ADLINK's knowledgeable staff about a specific product or issue. ADLINK AAE (Ask an Expert) is available 24/7 online and is staffed by dedicated professionals who are available to address customers' needs and answers question. All issues and comments are recorded into a database and can be tracked/reviewed at anytime. ADLINK customers are invited to access the AAE system at: http://www.adlinktech.com/AAE
Management FlowThe management flow of ADLINK's Green Policy begins during the development stage of a product. Only parts and raw materials that meet RoHS requirements are sourced. Our engineers specifically design products using only qualified components. A lead-free process ensures that manufactured products are "green." Green products do not contain environmentally hazardous elements and can easily be recycled.
REACH DeclarationThe Registration, Evaluation, Authorization and Restriction of Chemicals Regulation 1907/2006, commonly referred to as "REACH", is Europe's new chemicals legislation. The products that we supply are non-chemical products and under normal and reasonable use, they will not release harmful substance. Furthermore, we will immediately inform you in correspondence to REACH-Article 33 if any substance of content (as from a content of >0.1%) in our products will be classified alarming by the European Agency for Chemicals ECHA.
Partner CenterThe ADLINK Partner Center is specifically designed for worldwide sales and marketing support to allow our global sales representatives and distributors access to real-time product and marketing information and materials as soon as they are released at ADLINK headquarters. More than a resource database, the ADLINK Partner Center will also facilitate your business in serving customers.
Customer Services
ADLINK is not only devoted to providing local service worldwide, but also to providing convenient online service. The following services are available around the clock on the internet.
Environmental Protection Policy
ADLINK implemented a Green Product Policy in May 2004 to align the purchasing and use of green products meeting requirements from international environment protection statutes. Environmental protection is a top priority for the management at ADLINK. Measures have been taken to ensure that our products have little impact on the environment. In addition to planning a leadless process, the affect on the environment of components and raw materials will also be reduced. The Green Product concept has been built into our new product development system to ensure protection of the environment and continued business success.
Design and Manufacturing Services
P 6 P 7
Building Forward Together
Rugged Building Blocks Simplify Deployment,Reduce Risks with Pre-validated Systems
ADLINK is powered by a valuable combination of in-house design and manufacturing capabilities, delivering intelligent technology ranging from industrial platform elements to fully formed, high performance systems. Performance is optimized through smart design principles, merging hardware and software into a single foundation layer supporting sophisticated industrial applications.
A wealth of I/O and performance options enables outstanding flexibility and viability for a wide spectrum of deployments; reducing risk and speeding systems to market with standards-based, validated rugged performance.
Winning Markets with Strong Partnership, Long Product Lifecycles and Predictable Roadmaps, Effective Design Partnerships Enable Product Longevity
Market leadership demands quick reactions to stay ahead of the development curve with long-term deployable solutions. Industry-specific expertise is essential in these efforts, requiring proven knowledge of rugged design principles, environmental requirements, and standards and market trends, along with trusted partnerships that advance competitive design by building on engineering knowledge and expertise. As a Premier member of the Intel® Internet of Things Solutions Alliance, ADLINK works closely with Intel® to develop products and platforms based on the latest high performance Intel® technologies and processors. ADLINK ensures ideal product lifecycles and a trusted supply line based on the Intel® Embedded Platform Roadmap, providing quality, performance, optimized time-to-market and longevity for development of next-generation designs.
Industrial Automation
Industrial automation is a key facet of global manufacturing industries, with enterprises facing enormous pressure to automate and integrate to maximize output, improve cost-efficiency, and generate tangible competitive value. ADLINK has proven itself solving these types of industrial computing challenges, providing proven platforms to optimize operations while enabling a long-term vision of sustainable, integrated manufacturing. As industrial computing evolves to embrace enterprise-level automation, ADLINK's flexible roster of system-, platform-, and product-based solutions overcomes the extreme environmental rigors of manufacturing deployment to deliver connected, fault-free performance on the factory floor.
ADLINK industrial automation products speed time-to-market with standards-based, validated systems, purpose-built for high performance environments. Capitalizing on more than 15 years of expertise with highly evolved high-value preventive maintenance features and capabilities, ADLINK intelligent platforms and I/O devices, control panels, and management tools readily meet the networking, data processing, and mission-critical performance needs essential to integrated manufacturing operations, across a wide spectrum of manufacturing industries worldwide. ADLINK's extensive offerings of board-level, box-level, and user interface solutions provide the ultimate in performance and flexibility for complex industrial automation applications.
ADLINK CompactPCI Advantages
As the leading supplier of open-platform based automation equipment, ADLINK provides a complete line of 3U and 6U CompactPCI platform. Complemented by a diverse line of plug-in boards, these CompactPCI products provide the most cost-effective high performance platforms for industrial automation.
Value blades with scalabe processing performance
CompactPCI PlusIO compliant blades expandable via by fast, serial point-to-point connections
Wide range of real-time operating systems supported to prevent failures and minimize downtime
ADLINK Technology provides superior quality and cost effective CompactPCI technology solutions with complete manufacturing, system integration and professional field support. ADLINK strives to minimize the total cost of ownership (TCO) of its customers by providing customization and system integration services, maintaining low manufacturing costs, and extending the lifecycle of its products.
Related Products
cPCI-6625/66U CompactPCI PlusIO Blade with Intel® Core™ i7/i3 Processor
cPCI-6620Value 6U CompactPCI Intel® Low Power 2nd Generation Core™ i7/Celeron® Processor Blade
cPCI-6210 6U CompactPCI Host/Peripheral Blade withQuad-core Intel® Core™ i7 Processorr
P 8 P 9
Building Forward Together
1
1
2
2
3
Smoke Detector
Intercom
DigitalSignage
Passenger Information Display
Operation Control Center (OCC)
DriverDisplay
Innovating with Railway Transportation Design Expertise
Customers have a competitive advantage with ready access to a range of industry-certified application ready platforms, as well as the elements to develop their own. ADLINK further maintains a dynamic role in embedded standards development, ultimately creating modular, standards-based technologies that provide the foundation for high-value transportation platforms. ADLINK’s long-held support of COTS (commercial off-the-shelf) technology and open systems enables flexible technologies and platforms that are scalable and rugged enough for extended deployment in diverse transportation management and passenger service applications. End-users reduce risk and total cost of ownership with the ideal combination of low power consumption, small footprint, optimized features and high reliability in a standards-based platform.
For developers of intelligent railway transportation systems, ADLINK is your platforms supplier of railway transportation products, including systems that provide robust, fault-free connectivity, as well as the high-speed I/O required to support the broad and growing spectrum of transportation systems and applications.
Related Products
Rail Transport
Railway transportation markets create a diverse and complex embedded design landscape, fragmented by the very nature of global transportation venues but unified in the need for flexible, reliable, long-term performance. Characterized by extreme conditions, non-stop operation and ever-increasing processing requirements, transportation deployments must meet tremendous performance standards while also delivering ideal passenger service, comfort and safety. Intelligent transportation systems (ITS) benefit travelers and providers alike, enabling better management decisions and improving the travel experience by making safer and smarter use of rugged networked technologies.
ADLINK’s rugged transportation products and platforms are optimized for the development of intelligent transportation systems, meeting space and performance demands, severe environmental restrictions and specialized industry certifications, such as EN 50155 that ensure performance and reliability. With more than 25 years of Rugged by Design expertise, ADLINK enables safe, secure and connected travel, solving complex issues in high performance data processing, mobile connectivity and networked communications in the extreme rigors of transportation environments. Customers have a competitive advantage with ready access to a range of industry-certified application ready platforms, as well as the elements to develop their own.
EN 50155-compliant Platforms Accelerate Time-to-Market
Railway transportation applications can be uniquely demanding for embedded designers, with extended deployments requiring always-on operation for up to 100,000 hours in exposed environments, extreme temperatures in desert or snow, or under conditions of high vibration. To manage these physical extremes in harsh environments, railway systems and platforms must conform to stringent regulatory requirements. ADLINK’s CompactPCI railway systems are EN 50155 compliant and support fault-free performance under these conditions. ADLINK’s railway products and platforms meet global railway industry requirements for onboard train management and wayside control systems, remote video surveillance and monitoring, broadband Internet access systems and a broad range of passenger information and entertainment systems.
Wayside and Onboard Solutions
Automatic Train Operation (ATO) Onboard Rugged Storage Systems2
Wayside Applications(Train Dispatching and Command, Centralized Traffic Control)
3
IPCamera
cPCI-3620T3U CompactPCI Quad-CoreIntel® Atom™ Processor Blade
cPCI-3510L3U CompactPCI 4th GenerationIntel® Core™ i7 Processor Blade with ECC
cPCI-A35153U CompactPCI Serial 4th/5th GenerationIntel® Core™ i7 Processor Blade with ECC
P 10 P 11
Building Forward Together
CompactPCI is a high performance industrial bus architecture with a modular and scalable approach to building systems that leverages the rugged and robust form factor of 3U and 6U Eurocard packaging and features high speed I/O and hot swap capability.
CompactPCI is defined as a computer interface with blade structure, an implementation of a board-level computer installed in a passive backplane with multiple slots for pluggable boards to provide I/O, storage, or multiple density processing. The entire chassis is a single system which can include multiple computing elements to provide the desired level of performance and redundancy. There is always one board in charge, the master board that coordinates operation of the entire system.
Exceptional Performance, Reliability & Affordability
ADLINK's CompactPCI products are highly reliable and flexible to meet the needs of a variety of demanding applications. As a provider of complete computing platforms and building blocks, ADLINK designs its CompactPCI products to offer users these added benefits:
Applications
ADLINK's CompactPCI products are market-proven, highly reliable and high performance computer platforms for mission critical applications.
Solutions
As a leading developer of CompactPCI products, ADLINK offers a wide range of off-the-shelf solutions, including Processor boards, backplanes, chassis, power supplies, rear transition modules, and peripheral I/O cards in both 3U and 6U form factors.
PICMG 2.x is the family of specifications and guidelines developed for CompactPCI
PICMG 2.0 Base SpecificationPICMG 2.1 Hot SwapPICMG 2.5 Computer Telephony (H.110)PICMG 2.9 System Management BusPICMG 2.10 Keying of Compact PCI Boards and BackplanesPICMG 2.11 Power Interface
PICMG 2.12 Hot Swap Infrastructure InterfacePICMG 2.14 Multi-computingPICMG 2.16 Packet Switching BackplanePICMG 2.30 CompactPCI PlusIOPICMG CPCI-S CompactPCI Serial
Open Industrial Standard & ArchitectureMultiple vendors for vertical solutionsMix and Match, Plug and Play with more than 20 CompactPCI data acquisition and add-on cardsExtensive OS & software support for system development PCI software transparent
Flexible ConfigurationMultiple system configurations19" rack mount, benchtop and portable models availableEasy upgradability
High AvailabilityMission critical applicationsFault resilient & hot swappable modules
Easy I/O AccessFront or rear I/O optionsEasy maintenanceLower Mean Time To Repair (MTTR)
Ruggedized & ModularEurocard packagingExcellent shock and vibration characteristicsSmart cooling system, allows operating temperature range as wide as -40°C to 85°C4-way positive retension
LongevityMinimum 5-year life cycleOptional extended life cycle service
3U/ 6U CompactPCI Processor Blades CompactPCI Chassis CompactPCI I/O Peripherals
Comprehensive selection of CompactPCI and CompactPCI PlusIO single board computer models with air or conduction cooling
1U-9U CompactPCI chassis with front/rear I/O, H.110 CT bus and redundant power supply options
Comprehensive selection of CompactPCI peripherals including Ethernet & serial cards and PMC/XMC modules
6U CompactPCI RTMs CompactPCI (PlusIO) Backplanes Power Supplies
ADLINK offers a diverse line of Rear Transition Modules (RTM) that allow 6U CompactPCI platforms to deliver more I/O connectivity
ADLINK offers a wide range of standard backplanes to meet a variety of demands.
3U and 6U CompactPCI power supplies to meet the needs of a variety of applications.
Reliability
HALT & HASS testing and screening based on VITA 47 environmental specifications
Rail Solutions: Automatic Train Operation (ATO) systems, Automatic Train Supervision (ATS) systems, Automatic Train Protection (ATP) systems, Centralized Traffic Control (CTC) systems
Industrial Automation: Control systems, factory automation, SMT machines
Military: Air defense radar systems, sonar or imaging systems, unmanned aircraft controllers
CompactPCI
P 12 P 13
6U Air-Cooled Processor Blades 6U Air-Cooled Processor Blades
Model NamecPCI-6630 cPCI-6940 cPCI-6530(BL)
cPCI-6525 cPCI-6520cPCI-6210 cPCI-6510
cPCI-6930 cPCI-6625 cPCI-6620cPCI-6630 cPCI-6630D cPCI-6940 cPCI-6940D CI-6530(BL) cPCI-6530(BL)V cPCI-6210 cPCI-6210D cPCI-6510 cPCI-6510V
CPU and CoreLogic
CPU 6th Gen Intel® Core™ i7/i5/Celeron® 16-core Intel® Xeon® D Family 4th/5th Gen Intel® Core™
i7-4700EQ 3rd Gen Intel® Core™ i7 3rd Gen Intel® Core™ i72nd Gen Intel®
Core™ i7/i5Intel® Core™ i7
8-core Intel® Xeon®
2nd Gen Intel® Core™ i7/i5
2nd Gen Intel®
Core™ i7
CPU Speed (max.) 3.5GHz 2.3GHz 3.4GHz 2.3 GHz 2.5GHz 2.5GHz 2.53GHz 2.0GHz 2.2 GHz 2.2GHz
Chipset HM170 - QM87 QM77 QM77 QM67 QM57 C600 HM65 HM65
Form Factor& Bus
PICMG Spec.2.0 (R3.0), 2.1 (R2.0),
2.16 (R1.0)2.0 (R3.0), 2.1 (R2.0),
2.9 (IPMI v1.5), 2.16 (R1.0)2.0 (R3.0), 2.1 (R2.0),
2.9 (IPMI v1.5), 2.16 (R1.0)2.0 (R3.0), 2.1 (R2.0),
2.9 (IPMI v1.5), 2.16 (R1.0)2.0 (R3.0), 2.1 (R2.0), 2.9 (R1.0), 2.16 (R1.0)
2.0 (R3.0), 2.1 (R2.0), 2.9 (R1.0), 2.16 (R1.0)
2.0 (R3.0), 2.1 (R2.0), 2.9 (R1.0), 2.16 (R1.0)
2.0 (R3.0), 2.1 (R2.0)2.9 (R1.0), 2.16 (R1.0)
2.0 (R3.0)2.30 (PlusIO)
2.0 (R3.0)
Slot Width 1 2 1 2 1 1 1 1 2 1 1/2 2 2
Host/Peripheral Host Host/Universal Host/Universal Host/Satellite Host/Satellite Host/Satellite Host/Universal Host/Satellite Host Host only
PCI Bandwidth (max.) 64-bit/66MHz 64-bit/66MHz 64-bit/66MHz 64-bit/66MHz 64-bit/66MHz 64-bit/66MHz 64-bit/66MHz 64-bit/66MHz 32-bit/33MHz 32-bit/33MHz
PMC 1 (32-bit) - 2 (64-bit) 1 (64-bit) - 1 (64-bit) 1 (32-bit) 2 (64-bit) 1 (64-bit) 1 (64-bit) - -
XMC - - 1 (PCIe x8) optional 2 (PCIe x8) 1 (PCIe x8) - 1 (PCIe x8) 1 (PCIe x8) 1 (PCIe x8) 1 (PCIe x8) - -
Memory
Type DDR4-2133 DDR4-2133 DDR3L-1600 DDR3-1600 DDR3-1333/1600 DDR3-1600 DDR3-1066 DDR3-1600 DDR3-1333 DDR3-1333
Max. Capacity 16GB SODIMM16GB soldered +
2x 16GB SODIMM8GB soldered + 8GB SODIMM
8GB solder + 8GB SODIMM
8GB soldered + 8GB SODIMM
16GB SODIMM 8GB soldered 96GB RDIMM 16GB SODIMM 16GB DIMM
ECC Support No Yes Yes Yes Yes No Yes Yes No No
DisplayGraphics Controller Integrated in processor AMD E8860 Integrated in processor Integrated in processor Integrated in processor Integrated in processor Integrated in processor SMI SM750 Integrated in processor Integrated in processor
Interface DVI-I, DVI-D VGA, DP - DVI-I DVI-I 2x DP DP, DVI-I - DVI-I VGA 2x VGA DVI-D
Ethernet Gigabit Ethernet 3 (3F) 4 (2F+2R, 2x 10G) 4 (2F+2R) 2F+2R 4 (2F+2R) 4 (3F+1R or 2F+2R) 4 (2F+2R) 6 (4F+2R) 2 4
Storage
SATA 2F+1R 1F+2R 2F+2Roptional 1F+3R 2F+3R 2F+3R 4 (1F+3R) 5 (2F+3R) 3R 4 (1F+3R) 4(1F+3R) 2 1
CompactFlash 1F (optional) - - - - Yes Optional Yes Optional - -
CFast 1F (optional) - - 1 (optional) 1 (optional) 1 (optional) Yes - Optional - -
NAND Flash - - 1 (mSATA slot) 1 (mSATA slot) - - - - 4GB SATA - -
I/O
USB 2.0 1F+5R 6R 1F+6R 1F+6R 6R 6R 9 (3F+6R) 8 (2F+6R) 9 (3F+6R) 9 (3F+6R) 4 4
USB 3.0 3F 2F+2R 1F 2F 3F 3 1 2 - 2 - -
Serial 1F+2R 2F+2R 1F+3R 2R 1F+2R 1F+3R 3 (1F+2R) - 2R 3 (1F+2R) 3 (1+2R) 4 2
PS/2 KB/MS 1F 1R 1R 1R 1R 1R 2 (1F+1R) 1R 1R - -
Rear I/O Yes Yes Yes Yes Yes Yes Yes Yes No No No
Chassis Model cPCI BuscPCI-6630 cPCI-6940 cPCI-6530(BL) cPCI-6525 cPCI-6520 cPCI-6210 cPCI-6510 cPCI-6930 cPCI-6625 cPCI-6620
Host Periph. Host Periph. Host Periph. Host Periph. Host Periph. Host Periph. Host Periph. Host Periph. Host Periph. Host Periph.
cPCIS-3300BLS N/A ✔ ✘ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✔ ✘
cPCIS-3330 32-bit/33MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✔ ✘ ✘ ✘
cPCIS-3330/64 64-bit/66MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✘ ✘ ✘ ✘
cPCIS-3320 64-bit/66MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✘ ✘ ✘ ✘
cPCIS-5080 32-bit/33MHz ✔ ✘ ✔ ✘ ✔ △ ✔ ✘ ✔ △ ✔ △ ✔ △ ✔ △ ✔ △ ✔ △
cPCIS-6130R 64-bit/66MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✘ ✘ ✘ ✘
cPCIS-6400U 64-bit/66MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✘ ✘ ✔ ✘
cPCIS-6400U/32 32-bit/33MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✔ ✘ ✘ ✘
cPCIS-6400X 64-bit/66MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✘ ✘ ✔ ✘
cPCIS-6400X/32 32-bit/33MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✔ ✘ ✔ ✘
cPCIS-6230R/6240R 32-bit/33MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✔ ✘ ✘ ✘
cPCIS-6418U 64-bit/66MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✘ ✘ ✘ ✘
cPCIS-6230R/64 64-bit/66MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✘ ✘ ✘ ✘
cPCIS-6230R/64/N110 64-bit/66MHz ✔ ✘ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✔ ✘
cPCIS-6235R 32-bit/33MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✔ ✘ ✘ ✘
cPCIS-6235R/64 64-bit/66MHz ✔ ✘ ✔ ○ ✔ △ ✔ ○ ✔ △ ✔ ✔ ✔ △ ✔ ✔ ✘ ✘ ✘ ✘
6U Rugged Conduction Cooled
Model Name CT-6530 CT-61
CPU and CoreLogic
CPU Intel® Core™ i7/i5 Intel® Core™ i7
CPU Speed (max.) 3.4GHz 2.0GHz
Chipset QM87 PCH QM57 PCH
Form Factor& Bus
PICMG Spec.2.0 (R3.0), 2.1
(R2.0), 2.9 (R1.0), 2.16 (R1.0)
2.0 (R3.0), 2.1 (R2.0), 2.9 (R1.0),
2.16 (R1.0)
Slot Width 1 1
Host/Peripheral Host/Universal Host/Universal
PCI Bandwidth (max.) 64-bit/66MHz 64-bit/66MHz
PMC 2 (64-bit) 2 (64-bit)
XMC 2 (PCIe x8) 1 (PCIe x8)
Memory
Type DDR3L-1600 DDR3-1066
Max. Capacity 8GB soldered 8GB soldered
ECC Support Yes Yes
Display
Graphics Controller
Integrated in processor
Interface DVI-1 LVDS
Ethernet Gigabit Ethernet 2R 2R
Storage
SATA 3R 2
CompactFlash - -
CFast - -
NAND - -
I/O
USB 2.0 6R 6
USB 3.0 - -
Serial 2R 2x RS-232
PA/2 KB/MS 2R 1
Other
Rear I/O Yes Yes
PCI Express 1R, x4 1R, x4
Audio High Def. High Def.
GPIO 5R 5R
TMDS Yes Yes
RGB 1R 1R
PIM 2R 2R
Operating Temp.-40°C to +85°C
(selected CPUs)-40°C to +85°C
Vibration20-2000 Hz, 3g
(sine), operating22-2000 Hz, 5g
(sine), operating
Shock 40g/11ms half sine, operating
Chassis Compatibility
✔: Compatible, ✘: Not Supported, △: Limitation - PIM is not functional in peripheral slot with H.110, ○: J4 connector is reserved for PCIe x16, insertion in peripheral slot may cause damage to SBC.
Note: F = Blade; R = Rear Transition Module
6U CompactPCI Blades
P 14 P 15
6U RTMs 6U RTMs
cPCI-R66X0 Series cPCI-R6000 Series cPCI-R6200 Series cPCI-R6100 Series cPCI-R6500 Series cPCI-R65N0
Model Name
cPCI-R66G0 cPCI-R66N0 cPCI-R66S0 cPCI-R6002 cPCI-R6002D cPCI-R6000P cPCI-R6210 Model Name
cPCI-R6100 cPCI-R6110 cPCI-R6120 cPCI-R6500 cPCI-R6500D cPCI-R6501D cPCI-R65N0
Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard Faceplate Onboard
GbE 22 (RJ-45)
2 (M12 mil. conn.)
4 2 2 2 GbE 4(6) 2 2 2 2 2 2
USB 2.0 1 2(1) 3 2(1) 3 2 1 (5-pin) 4 1 (5-pin) 2 1 (5-pin) 1 1 (5-pin) USB 2.0 4 4 4 1 1 1 (10-pin) 2 1
COM 2(2) 11 (10-pin)(TX/RX)
11 (10-pin)(TX/RX)
1(DB-9)1 (10-pin)(TX/RX)
1(DB-9)1 (10-pin)(TX/RX)
1 (DB-9)1 (10-pin)(TX/RX)
1 (10-pin)(TX/RX)
COM 1 (RJ-45) 2 (10-pin) 1 (DB-9)1 (10-pin)(TX/RX)
1 1 (Tx/Rx)
DVI 3 (DVI-D)1 (DVI-I)
2 (DVI-I, DVI-D) 2 (DVI-D) 1 (DVI-I)(3) 1 (DVI-I)(3) 1 (DVI-I)(3) 1 (DVI-I)(3) DVI 1(3) 2(8)
(DVI-I, DVI-D)2(8)
(DVI-I, DVI-D)2(8)
(DVI-I, DVI-D)2(8)
(DVI-I, DVI-D)
VGA VGA 1 1 1
PMC 1 (PIM) 2 (PIM) PMC
SATA 3 (7-pin) 3 (7-pin) 3 (7-pin) 2 (7-pin) 3(4) 2 (7-pin) 2 (7-pin) SATA 2 (7-pin) 3(4)(7) 2 3 (7-pin) 3 (7-pin)(7) 3 (7-pin) 3 (7-pin)
CF 1(4)
(optional)1(4)
(optional) CF 1(5) 1(5)
Mic-in 1 1 1 Mic-in1 (10-pin) 1 (10-pin) 1 (10-pin)
Line-out 1 1 (M12 mil. conn.) 1 1 Line-out
PS/2 KB/MS 1 1 (M12 mil. conn.) 1 1 PS/2 KB/MS 1 1 1 1 (10-pin) 1 1
SD SD 1 1
SAS 4 4 SAS
cPCI-R66X0 Series cPCI-R6000 Series cPCI-R6200 Series cPCI-R6100 Series cPCI-R6500 Series cPCI-R65N0
Model Name
cPCI-R66G0 cPCI-R66N0 cPCI-R66S0 cPCI-R6002 cPCI-R6002D cPCI-R6000P cPCI-R6210Model Name
cPCI-R6100 cPCI-R6110 cPCI-R6120 cPCI-R6500 cPCI-R6500D cPCI-R6501D cPCI-R65N0
Slot width 8HP 8HP 8HP 4HP 8HP 4HP 4HP Slot width 4HP 4HP 8HP 4HP 8HP 8HP 8HP
cPCI-6630(D) ✔(1) cPCI-6630(D)
cPCI-6940 ✔ ✔ cPCI-6940 ✔ ✔ ✔ ✔ ✔ ✔
cPCI-6530 ✔ ✔ ✔ ✔ cPCI-6530 ✔ ✔ ✔ ✔ ✔ ✔ ✔
cPCI-6525 ✔ ✔ ✔ cPCI-6525
cPCI-6520 ✔ ✔ ✔ cPCI-6520 ✔ ✔ ✔ ✔ ✔ ✔ ✔
cPCI-6930(D) ✔(2) ✔(2) ✔(2) cPCI-6930(D) ✔(2) ✔(2) ✔
cPCI-6210(D) ✔ ✔ cPCI-6210(D) ✔ ✔ ✔ ✔
cPCI-6510(V) ✔ ✔ ✔ cPCI-6510(V) ✔ ✔ ✔
CT-6530 ✔ ✔ ✔ ✔ CT-6530 ✔ ✔ ✔ ✔ ✔ ✔ ✔
CT-61 ✔ ✔ ✔ ✔ CT-61 ✔ ✔ ✔
(1) Only one onboard 7-pin SATA port is supported
(2) No DVI support
6U Processor Blade Compatibility
6U CompactPCI Rear Transition Modules
(1) One 10-pin pin header with 2x USB 2.0 signals
(2) One RS-232/422/485 and two serial Tx/Rx
(3) Supports VGA only when mated with cPCI-6930, cPCI-6880(P), cPCI-6870
(4) Two 7-pin signal connectors onboard for external drives and one direct connector for onboard 2.5” SATA drive. Optional CompactFlash slot is supported when SATA connector adapter is replaced by CompactFlash adapter. SATA drive and CF not supported simultaneously.
(5) Converted from USB which unable to support Windows OS installation.
(6) Two GbE ports are from independent Intel® I350-AM2 Gigabit Ethernet controller on RTM
(7) Space is reserved onboard for one 2.5” SATA drive
(8) One DVI-I (digital + analog), one DVI-D (digital only) are from graphic chip on MXM module assembled on RTM
✔: Compatible
P 16 P 17
3U CompactPCI Processor Blades
3U Rugged Conduction Cooled Blades
Model Name CT-3620 CT-3510(BL)
CPU and CoreLogic
CPU Intel® Atom™ E3845 Intel® Core™ i7/i5
CPU Speed (max.)
1.9GHz Max. 3.4GHz
Chipset - QM87
Form Factor& Bus
PICMG Spec. 2.0 (R3.0), 2.1 (R2.0)2.0 (R3.0), 2.1 (R2.0), 2.30, 2.9 (IPMI v1.5)
Form Factor 3U 3U
Slot width 1 1
Host/Peripheral
Host/Satellite Host/Satellite
PCI Bandwidth
(max.)32-bit/33, 66MHz 32-bit/33, 66MHz
Memory
Type DDR3L-1333 DDR3L-1600
Max. Capacity
4GB 8GB
ECC Support Yes Yes
Display
Graphics Controller
Integrated in processor
Interface VGA (rear I/O) VGA (rear I/O)
EthernetGigabit
Ethernet2R 2R
Storage
SATA 1R 3R
CompactFlash - -
CFast - -
NAND Flash 32GB 32GB
I/O
USB 2.0 1R 3R
Serial 2R 1R
PS/2 KB/MS - -
Other
PCI Express PCIe x1, 1R PCIe x1, 4R
Audio - -
GPIO - -
Operating Temp. -40°C to +85°C -40°C to +85°C
Vibration5-2000Hz, 12g rms,
operating5-2000Hz, 12g rms,
operating
Shock40g/11ms half sine,
operating40g/11ms half sine,
operating
RTMcPCI-R3610 (50mm), cPCI-R3610T (80mm)
cPCI-R3P00 (50mm), cPCI-R3P00T (80mm)
3U Air-Cooled Processor Blades 3U Air-Cooled Processor Blades
Model Name cPCI-A3515cPCI-3510(BL) / cPCI-3511(BL) cPCI-3970 / cPCI-3971 cPCI-3620
cPCI-3510(BL) cPCI-3510(BL)D cdPCI-3510(BL)G cPCI-3510L cPCI-3511(BL) cPCI-3970/1 cPCI-3970/1D cPCI-3970/1G cPCI-3970L cPCI-3620 cPCI-3620D cPCI-3620T cPCI-3620N cPCI-3620S
CPU and CoreLogic
CPU 4th/5th Gen Intel® CoreTM i7 4th/5th Gen Intel® Core™ i7 2nd Gen Intel® CoreTM i7/i5 Intel® Atom™ E3845
CPU Speed (max.) 3.4GHz 3.4GHz 3.0GHz 1.91GHz
Chipset QM87 QM87 QM67 -
Form Factor& Bus
PICMG Spec. CPCI-S.0 2.0 (R3.0), 2.1 (R2.0), 2.9 (R1.0), 2.30 2.0 (R3.0), 2.1 (R2.0), 2.30 (PlusIO) 2.0 (R3.0), 2.1 (R2.0)
Form Factor 3U 3U 3U 3U
Slot width 1 1 2 2 2 1 1 2 2 2 1 2 2 1 2
Host/Peripheral Host/Satellite Host/Satellite Host/Satellite Host/Satellite
PCI Bandwidth (max.) - 32-bit/33,66MHz 32-bit/33MHz 32-bit/33,66MHz
Memory
Type DDR3L-1333/1600 DDR3L-1333/1600 DDR3-1333 DDR3L-1333
Max. Capacity 16GB soldered 16GB soldered 8GB SODIMM Max. 4GB soldered
ECC Support Yes Yes Yes Yes
Display
Graphics Controller Integrated in processor Intel® Atom™
Interface 2x DP DVI-I DVI-IDVI-I + 2x DP
DVI-I DVI-I VGA VGAVGA +
2x DP/DVIVGA VGA VGA VGA - VGA
Ethernet Gigabit Ethernet 2F 2F+2R 2F+2R 2F+2R 4F+2R 2R 2F+2R 4F+2R 2F+2R 2F+2R4F+2R
(2x RJ-45,2x M12)
2R 2F+2R
Storage
CompactFlash - - - - - - 1 -
Serial ATA 2 3R 1F+3R 1F+3R 1F+3R 3R 3R 1F+3R 1F+3R 1F+3R 1R 1F 1F - 1F
mSATA 1 (optional) 1 (optional) 1 (optional) 1 (optional) 1 (optional) 1 (optional) - 1 (optional)
CFast - 1(optional) 1 1 1 1
(optional) 1 (optional) -
NAND Flash 1(optional) 1 1
(optional)1
(optional)1
(optional) 1 1 (optional) 1 1(optional)
1(optional) 1 1
(optional)
I/O
PS/2 KB/MS - - 1 1 - - - 1 1 - - - - - -
Serial 1 (optional) 1R 1F+1R 1+1R 1F+1R 1R - 1F+2R 1F+2R 1F+2R 2R 1F+1R 1F+1R 2R 2R
I/O USB 2F 1F+3R 3F+3R 2F+3R 2F+3R 1F+3R 2F+2R 4F+2R 3F+2R 3F+2R 1F+2R 3F+2R 1F+2R 1F+2R 1F+2R
Audio Line-in/Line-out (optional) - Line-in, Line-out - - - - Line-in,Line-out - - - Line-in,
Line-out - -
Compatible RTM - cPCI-R3P00 (50mm), cPCI-R3P00T (80mm) cPCI-3970 Series: cPCI-R3P00 (50mm), cPCI-R3P00T (80mm) cPCI-R3610 (50mm), cPCI-R3610T (80mm)
Chassis Model cPCI BuscPCI-A3515 cPCI-3510(BL) / cPCI-3511(BL) cPCI-3970 / cPCI-3971 cPCI-3620
Host Periph. Host Periph. Host Periph. Host Periph.
cPCIS-3048 32-bit/33 MHz ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
cPCIS-P2630 32-bit/33 MHz ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
cPCIS-1000 series 32-bit/33 MHz ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
cPCIS-2500 series 32-bit/33 MHz ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
cPCIS-2600 series 32-bit/33 MHz ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
cPCIS-2630 series 32-bit/33 MHz ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
cPCIS-2632 series 32-bit/33 MHz ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
cPCIS-2633 series 32-bit/33 MHz ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
cPCIS-2642 series 32-bit/33 MHz ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
Chassis Compatibility
✔: Compatible, ✘: Not Supported
Note: F = Blade; R = Rear Transition Module
P 18 P 19
6U CompactPCI Chassis
Model Name cPCIS-6130R Series cPCIS-6235R Series cPCIS-5080 Series cPCIS-6230R/6240R Series cPCIS-6418U Series
Form Factor
19” Rackmount Yes Yes No Yes Yes
Mounting Rackmount Rackmount Desktop Rackmount Rackmount
Height 1U 2U 7U 2U 4U
Board Orientation Horizontal Horizontal Vertical Horizontal Horizontal
Backplane
Total Slots 2 3/4 8 3/4 8
Total Segments 1 1 1 1 1
System Slots 1 1 1 1 1
Peripheral Slots 1 2 7 2/3 7
Fabric Slots -- -- -- -- --
32-bit/64-bit PCI Bus 64 32/64 32 32/64 64
CMM Slots -- -- -- -- --
Additional Features H.110/Non H.110 H.110/Non H.110 -- H.110/Non H.110 H.110/Non H.110
Power Supply
Redundant PSU -- ATX 300W x 2 -- -- cPCI 250W x 3
Non-redundant PSU ATX 200W -- ATX 300W ATX 300W --
Alarms
Fan Status -- Yes -- -- Yes
Over Temperature -- Yes -- -- Yes
Voltages Status -- Yes -- -- Yes
Web Access Module -- -- -- -- Optional
Others
SLIM TYPE SATA DVD ROM -- -- -- -- Yes
SATA Drive Bays -- -- -- 3.5”/2.5” --
SAS Drive Bays -- -- -- -- --
Operating Temperature 0˚C to +55˚C 0˚C to +55˚C 0˚C to +55˚C 0˚C to +55˚C 0˚C to 55˚C
3U CompactPCI Chassis
Model Name cPCIS-2630/2830 cPCIS-2632/2832 cPCIS-ET2632/ET2632R cPCIS-2633/2833 cPCIS-2642/2842
Form Factor
Width 19", 84HP 19", 84HP 19", 84HP 19", 84HP 19", 84HP
Desktop Y Y Y Y Y
Wallmount - - - - -
Height 4U 4U 4U 4U 4U
Backplane
Total System 1 1 1 1 2
Total Slots 8 8 8 13 12
System Slots 1 1 1 1 x2
Peripheral Slots 7 7 7 12 5 x2
PCI Bus 32bit/33MHz 32bit/33MHz 32bit/33MHz 32bit/33MHz 32bit/33MHz
Power Supply
Redundant PSU - 250 W x2 (1) 250 W x 2(1,2) 250 W x3 (1) -
Non-redundant PSU 400 W (ATX) - - - 250 W x 2(1)
AlarmsFan Status Y Y Y Y Y
Over Temp. Y Y Y Y Y
Rear I/ODepth 50 mm/80 mm 50 mm/80 mm 50 mm(3) 50 mm/80 mm 50 mm/80 mm
Implementation Optional Optional Optional Optional Optional
Operating Temperature 0°C to 60°C 0°C to 60°C -20°C to +70°C 0°C to 60°C 0°C to 60°C
Model Name cPCIS-ET1100/1100AcPCIS-ET1102/
ET1102R/1102cPCIS-3048 cPCIS-1202/1202R cPCIS-2501 cPCIS-P2630R
Form Factor
Width 19", 84HP 19", 84HP 48HP 19", 84HP 40HP 19", 84HP
Desktop Y Y Y Y Y Y
Wallmount Y Y Y Y Y Y
Height 3U 3U 3U 3U 4U 3U
Backplane
Total System 1 1 1 2 1 1
Total Slots 8 8 7 12 6 10
System Slots 1 1 1 1 x2 1 1
Peripheral Slots 7 7 5 5 x2 5 5 + 4 (4)
PCI Bus 32bit/33MHz 32bit/33MHz 32bit/33MHz 32bit/33MHz 32bit/33MHz 32bit/33MHz
Power Supply
Redundant PSU - 250 W x2 (1, 2) 250 W x2 - - Optional
Non-redundant PSU 400 W (ATX) - - 250 W x2(1) 250 W(1) 400 W
AlarmsFan Status - - - - - Y
Over Temp. - - - - - Y
Rear I/ODepth 50 mm (3) 50 mm (3) 50 mm (3) 50 mm (3) - 50 mm (3)
Implementation Optional Optional Optional Optional - Optional
Model Name cPCIS-6400X Series cPCIS-6400U Series cPCIS-3320 Series cPCIS-3330 Series cPCIS-3300BLS Series
Form Factor
19” Rackmount Yes Yes Yes Yes Yes
Mounting Rackmount Rackmount Rackmount Rackmount Rackmount
Height 4U 4U 9U 9U 9U
Board Orientation Horizontal Horizontal Vertical Vertical Vertical
Backplane
Total Slots 5 5 13 8 14
Total Segments 1 1 2 1 1
System Slots 1 1 2 1 12
Peripheral Slots 4 4 11 7 --
Fabric Slots -- -- -- -- 2
32-bit/64-bit PCI Bus 32/64 32/64 64 32/64 --
CMM Slots -- -- Optional -- Optional
Additional Features H.110 H.110 H.110 H.110 2.16
Power supply
Redundant PSU -- cPCI 250W x 3 cPCI 250W x 4 cPCI 250W x 4 cPCI 400W x 3
Non-redundant PSU ATX 400W -- -- -- --
Alarms
Fan Status Yes Yes Yes Yes Yes
Over Temperature Yes Yes Yes Yes Yes
Voltages Status Yes Yes Yes Yes Yes
Web Access Module -- Optional -- -- --
Others
SLIM TYPE SATA DVD ROM Yes Yes -- Yes --
SATA Drive Bays 3.5” 3.5” 3.5” 3.5” --
SAS Drive Bays -- 3.5” -- -- --
Operating Temperature 0˚C to +55˚C 0˚C to +55˚C 0˚C to +55˚C 0˚C to +55˚C 0˚C to +55˚C
(1) PICMG 2.11 compliant CompactPCI power supply.
(2) Supports -20°C to +70°C with at least 400LFM (2 m/s) cooling fans(-20°C to +50°C at full load with 400LFM air flow and power efficiency will be derated linearly to 50% at +70°C).
(3) 80 mm depth RTM can be supported upon request.
(4) 5-slot CompactPCI peripheral slots and 4 CompactPCI serial slots.
6U CompactPCI Chassis 3U CompactPCI Chassis
P 20 P 21
6U Power Supplies
Model Name cPS-H640/48 cPS-H640/AC
PICMG Standards PICMG 2.11 PICMG 2.11
Form Factor 6U 6U
Width 8HP 8HP
Input Voltage 100 to 240 ± 10% VAC 36 to 72 VDC
Input Type AC DC
Input Current (peak)
5.1 A @115 VAC2.5 A @ 230 VAC
12A @ 48 V DC
Inrush Current < 30 A @230 VAC N/A
Output Voltage/Current
V1 (+5V)
Typ. 40A, Max. 50A Typ. 40A, Max. 50A
V2 (+3.3V)
Typ. 20A, Max. 40A Typ. 20A, Max. 40A
V3 (+12V)
Typ. 10A, Max. 15A Typ. 10A, Max. 15A
V4 (-12V)
Typ. 2A, Max. 5A Typ. 2A, Max. 5A
Output Current(min)
1.0 A @ +5 V 1.0 A @ +5 V
Output Power(watt)
400 400
Hold-up Time (ms) 10 10
Efficiency (%) 79 to 83 79 to 83
N+1 RedundancyEquipped with internal
OR-ingEquipped with internal
OR-ing
Remote ON/OFF Yes Yes
Operating Temperature
0°C to +70°C 0°C to +70°C
Cooling Requirement (Min)
20 CFM 20 CFM
CertificationsIEC950, EN 55022,
FCC Class A, IEC60950 Class I
IEC950, EN 55022, FCC Class A,
IEC60950 Class I
3U Power Supplies
Model Name cPS-H325/24 cPS-H325/48 cPS-H325/110 cPS-H325/AC cPS-P325/AC cPS-H325/WDC
PICMG Standards PIC MG 2.11 PICMG 2.11 PICMG 2.11 PICMG 2.11 PICMG 2.11 PICMG 2.11
Form Factor 3U 3U 3U 3U 3U 3U
Width 8HP 8HP 8HP 8HP 8HP 8HP
Input Voltage 18 to 36 VDC 36 to 72 VDC 66 to 160 VDC 90 to 264 ± 10% VAC 110 to 240 ± 10% VAC 16.6 to 160 VDC
Input Type DC DC DC AC AC DC
Input Current 32.6A @ 24 VDC 20A @ 48 VDC 2.8A @ 110 VDC2.8 A @ 115 VAC1.4 A @ 230 VAC
3.6A @ 230 VAC4A @ 260 VAC
6A @ 24 VDC,1.3A @ 110 VDC
Inrush Current N/A N/A 10.5A @ 110 VDC < 30 A @ 230 VAC < 15A @ 240 VAC 10.5A @ 110 VDC
Output Voltage/Current
V1 (+5V)
Typ. 25A, Max. 33.0A Typ. 25A, Max. 33A Typ. 25A, Max. 33A Typ. 25A, Max. 33A Typ. 25A, Max. 40A Typ. 20A, Max. 33A
V2 (+3.3V)
Typ. 18A, Max. 33.0A Typ. 18A, Max. 33A Typ. 18A, Max. 33A Typ. 18A, Max. 33A Typ. 20A, Max. 40A Typ. 20A, Max. 33A
V3 (+12V)
Typ. 5A, Max. 5.5A Typ. 5A, Max. 6A Typ. 5A, Max. 6A Typ. 5A, Max. 6A Typ. 4A, Max. 5.5A Typ. 11A, Max. 20A
V4 (-12V)
Typ. 0.5A, Max.1A Typ. 0.5A, Max.1.5A Typ. 0.5A, Max. 1.5A Typ. 0.5A, Max.1.5A Typ. 1A, Max. 2A Typ. 1A, Max. 2A
Output Current(min)
0.5 A @ +5 V 0.5 A @ +5 V 0.5 A @ +5 V 0.5 A @ +5 V 1.5 A @ +12 V 0.5 A @ +5 V
Output Power(watt)
250 250 250 250 250 120/300
Hold-up Time (ms) 5 5 5 5 20 30
Efficiency (%) 78 to 79 78 to 79 79 78 to 79 81.5 to 82.6 85 to 89
N+1 RedundancyEquipped with internal
OR-ingEquipped with internal
OR-ingEquipped with internal
OR-ingEquipped with internal
OR-ingEquipped with internal
OR-ingEquipped with internal
OR-ing
Remote ON/OFF Yes Yes Yes Yes Yes Yes
Operating Temperature
-40°C to +70°C -40°C to +70°C -40°C to +70°C -40°C to +70°C -25°C to +70°C -40 to 85C
Cooling Requirement (Min)
20 CFM 20 CFM 20 CFM 20 CFM 400 LFM Fanless/400 LFM
Certifications
EN 55022, FCC Class A, IEC 60950 Class I,
EN 61000-4-3, EN 61000-4-5, EN 61000-4-6
EN 55022, FCC Class A, IEC 60950 Class I,
EN 61000-4-3, EN 61000-4-5, EN 61000-4-6
EN 55022, FCC Class A, IEC 60950 Class I,
EN 61000-4-3, EN 61000-4-5, EN 61000-4-6
EN 55022, FCC Class A, IEC 60950 Class I,
EN 61000-4-3, EN 61000-4-5, EN 61000-4-6
IEC/EN 60950-1 2nd Ed, UL/CSA 60950-1 2nd Ed &
China CCC
EN 55022, FCC Class A, IEC 60950 Class I,
EN 61000-4-3, EN 61000-4-5,EN 61000-4-6
6U Switches
Model Name cPCI-6S10
Control Plane
Processor ARM Cortex-A9 CPU integrated in Broadcom BCM56150
Storage 8GB SLC NAND flash
Management
500 kB on-chip frame bufferDSCP remarking for both IPv4 and IPv6Jumbo frame supportProgrammable classifier for QoS, IEEE802.1p and DSCP for IPv4 and IPv68k MAC addresses and 4k VLANs (IEEE 802.1Q)Flexible link aggregation compliant to IEEE 802.3adFull-duplex flow control (IEEE 802.3x) and half duplex backpressure, symmetric and asymmetric multiple protocol support: IEEE 802.1D, IEEE 802.1w, IEEE 802.1s and IEEE 802.1X
Ethernet Standards
IEEE 802.3 for 10BASE-TIEEE 802.3u for 100BASE-TXIEEE 802.3ab for 1000BASE-TIEEE 802.3x for Flow ControlIEEE 802.3ad for LACP (Link Aggregation Control Protocol )IEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for Authentication
Data Plane
Fabric SwitchBroadcom BCM56150 24-port Gigabit Ethernet switch with
two 10 Gigabit SFP+ uplink ports
PHYBroadcom BCM54685 Octal port 1000BASE-T PHY
Broadcom BCM84752 Dual 10 Gigabit PHY
Interfaces
10GB Ethernet Uplink Two 10 Gigabit ports
10/100/1000BASE-T Management
Nineteen 1000BASE-T ports to J3/J5 for node slotsOne 1000BASE-T port to J3 for switch slot
Three 1000BASE-T ports to front panel, one can act asmanagement port
One 1000BASE-T port reserved for optional CMM
Front Connector One RJ-45 RS-232 console port
PICMG StandardsPICMG 2.0 CompactPCI R3.0
PICMG 2.9 System Management R1.0PICMG 2.16 Packet Switch Backplane R1.0
Mechanical and Environmental
Form Factor 6U 4HP (single slot)
Dimensions 233.35mm x 160mm (L x W)
OperatingTemperature and
Humidity
0°C to +60°C for air cooled-40°C to +85°C for conduction cooled
95% non-condensing
Storage Temperature -50°C to +100°C
LEDsPower Good. Status LEDs for
24 ports 1000BASE-T and 2 ports 10 Gigabit
Hardware Monitor Monitors voltages of CPU, switch and PHY by IPMI
Reset Button Passive reset button on front panel for blade reset
Operating SystemsWindows 7 32/64-bit
Red Hat Enterprise Linux(Please contact ADLINK for other OS support)
Vibration 15G peak-to-peak, 11ms duration, non-operating
Shock2Grms random vibration between 5-500Hz in 3 axis,
operating
Certifications CE/ FCC Class A
CompactPCI Switches & Power Supplies CompactPCI Power Supplies
P 22 P 23
6U Backplanes 6U Backplanes
Model Name cBP-6402 cBP-6402(R) cBP-6103R cBP-6104R cBP-6609A cBP-6415U cBP-6418U cBP-6413DR cBP-6614A
Form Factor 2-slot 6U 3-slot 6U 4-slot 6U 8-slot 6U 5-slot 6U 8-slot 6U 13-slot 6U 14-slot 6U
CompactPCI Bus 64-bit 32-bit 32-bit 64-bit, H.110 & 2.16 Bus 64-bit, w/o H.110 Bus 64-bit 64-bit PICMG 2.16 extra space Blade Server
PICMG Standards 2.0 R3.0, 2.1 R2.0 2.0 2.0 R3.0, 2.1 R2.0, 2.5 R1.0 2.0 R3.0, 2.1 R2.0, 2.5 R1.0 2.0 R3.0, 2.1 R2.0, 2.5 R1.0, 2.16, 2.9 R1.0
2.0 R3.0, 2.1 R2.0, 2.5 R1.0, 2.11 R1.0
2.0 R3.0, 2.1 R2.0, 2.5 R1.0, 2.11 R1.0
2.0 R3.0, 2.1 R2.0, 2.5 R1.0, 2.9 R1.0, 2.11 R1.0
2.0 R3.0, 2.1 R2.0, 2.9 R1.0, 2.11 R1.0, 2.16 R1.0
Dimensions (W x H) 309.6 x 39.64 mm 321.5 x 39.64 mm 279.2 x 81 mm 330.55 x 83.3 mm 202.5 x 262.05 mm (vertical slot orientation) 120.92 x 394.85 mm 395 x 162 mm 415.56 x 262.05 mm 420.6 x 262.05 mm
Segments One One One One One Two 2.16 Node Slot: 12 2.16 Fabric Slot: Two
CompactPCI Bus Up to 64-bit/66MHz Up to 32-bit/33MHz Up to 32-bit/33MHz Up to 64-bit/66MHz Up to 64-bit/66 MHz Up to 64-bit/66MHz Up to 64-bit/66MHz -
System Slot Bottom slot for horizontal slot orientation. Bottom slot for horizontal slot orientation Right-hand slot Right-hand slot (top slot for horizontal slot orientation)
Right-hand slot (top slot for horizontal slot orientation) Right-hand slot All node slots act as
stand-alone system slots
System Slot Rear I/O No rear I/O P3, P4 and P5 rear I/O withAB-type shroud P3, P4, and P5 rear I/O with AB-type shroud P3, P4 & P5 P3, P4 and P5 rear I/O with
AB-type shroudP3, P4 and P5 rear I/O with
AB-type shroudP3, P4 and P5 rear I/O with
AB-type shroudP3, P4 and P5 rear I/O with
AB-type shroud
Peripheral Slots One Two Three Five Four Seven Seven -
Peripheral Slot Rear I/O No rear I/O P3 and P5 rear I/O with AB-type shroud P3 and P5 rear I/O with AB-type shroud P4 & P5 P3, P4 and P5 rear I/O with
AB-type shroudP3 and P5 rear I/O with
AB-type shroudP3 and P5 rear I/O with
AB-type shroud -
H.110 Bus - - Complies with PICMG 2.5, for all peripheral slots Complies with PICMG 2.5 for all peripheral slots (P4)
Complies with PICMG 2.5, for all peripheral slots
Complies with PICMG 2.5, for all peripheral slots
Complies with PICMG 2.5, for all peripheral slots None
V (I/O) 3.3 V or 5 V selectable, factory default is 5 V 3.3 V or 5 V selectable, default 5 V 3.3 V or 5 V selectable, default is 5 V
3.3 V or 5 V selectable, factory default is 5 V
3.3 V or 5 V selectable, default is 5 V
3.3 V or 5 V selectable, default is 5 V
3.3 V or 5 V selectable, default is 5 V
Power Input ATX connector One ATX connector Two ATX connectors, DC screw terminals Two ATX, one DC screw terminal One ATX connector,
two DC screw terminalsTwo ATX connectors,
one DC screw terminalAC/DC input, one ATX connector,
DC screw terminals
System Slot Legacy I/O KB, MS, COM1, FDD , IDE1, Speaker - FDD, IDE1 - - - - -
Other Connectors Five Fans, PS_ON, Reset, PWR_LED Six Fans, PS_ON, Reset, PWR_LED INH#, Reset, PWR_FAL#, Voltage LEDs - INH#, Reset, PWR_FAL#, PWR_LED INH#, Reset, PWR_FAL#,
Voltage LEDsINH#, Reset, PWR_FAL#,
Voltage LEDsINH#, Reset, FAL#, DEG#,
Voltage LEDs, PCIMG 2.9 IPMB
Compatible Chassis cPCIS-6130R cPCIS-6230R cPCIS-6240R cPSB-880 cPCIS-6400U cPCIS-6418U cPCIS-3320 cPCIS-3300BLS series
6U Backplanes 3U Backplanes
Model Name cBP-6403R, cBP-6403R/N110 cBP-6105R cBP-6405R cBP-6408R cBP-320X[R] Series cBP-3210PR cBP-3213[R]
Form Factor 3-slot 6U 5-slot 6U 8-slot 6U 4/6/8-slot 3U 10-slot 3U 13-slot 3U
CompactPCI Bus 64-bit, w/o H.110 Bus 32/64-bit, cPCI H.110 Bus 32/64-bit 32-bit, with optional Rear I/O 32-bit, CompactPCI PlusIO Hybrid Backplane with Rear I/O 32-bit, with optional Rear I/O
PICMG Standards 2.0 R3.0, 2.1 R2.0, 2.5 R1.0 2.0 R3.0, 2.1 R2.0, 2.5 R1.0 2.0R3.0, 2.1 R2.0, 2.5 R1.0, 2.9 R1.0 2.0 R3.0, 2.1 R2.0 2.0 R3.0, 2.30, S.0 2.0 R3.0, 2.1 R2.0, 2.11 R1.0
Dimensions (W x H) 279.2 x 81 mm 120.9 x 262.05 mm (verticals slot orientation) 202.5 x 262.05 mm (vertical slot orientation) 100.7~181.9 x 128.7 mm 224.06 x 128.7 mm 425.7 x 128.7 mm
Segments One One One One One One
CompactPCI Bus Up to 64-bit/66 MHz 32-bit/33 MHz Up to 64-bit/66 MHz Up to 64-bit/66 MHz 32-bit/33 MHz 32-bit/33 MHz 32-bit/33 MHz
System Slot Top slot for horizontal slot orientation Right-hand slot (top slot for horizontal slot orientation) Right-hand slot Right-hand slot Right-hand slot Right-hand slot
System Slot Rear I/O P3, P4 and P5 rear I/O withAB-type shroud P3, P4 and P5 rear I/O with AB-type shroud P3, P4 and P5 rear I/O with
AB-type shroud P2 rear I/O with AB-type shroud - P2 rear I/O with AB-type shroud
Peripheral Slots Two Four Seven Three/Five/Seven Five 12 slots (cBP-R3213 bridge board is required)
Peripheral Slot Rear I/O 3.3 V or 5 V selectable, default 5 V P3 and P5 rear I/O with AB-type shroud P3 and P5 rear I/O withAB-type shroud
cBP-3204R/3206R: P2 rear I/O with AB-type shroud P2 rear I/O with AB-type shroud P2 rear I/O with AB-type shroud
H.110 Bus Complies with PICMG 2.5 (N110: none) Complies with PICMG 2.5, for all peripheral slots Complies with PICMG 2.5, for all
periphearl slots - - -
V (I/O) 3.3 V or 5 V selectable, factory default is 5 VV 3.3 V or 5 V selectable, default is 5 V
3.3 V or 5 V selectable, factory sefault is 5 V
3.3 V or 5 V selectable, factory sefault is 5 V
3.3 V or 5 V selectable, factory sefault is 5 V
Power Input ATX connector One ATX, DC screw terminal Two ATX, DC screw terminals Three ATX connectors, DC screw terminals Two ATX, DC screw terminals Two ATX, DC screw terminals AC/DC input, two ATX
Other Connectors FDD, IDE1 (N110: none) INH#, Reset, PWR_FAL#, Voltage LEDs, H.110 Power Pairs (VRG, Vbat)
INH#, Reset, PWR_FAL#, Voltage LEDs, H.110 Power Pairs
(VRG, Vbat), PCIMG 2.9 IPMBINH#, Reset, PWR_FAL# INH#, Reset, PWR_FAL#,
Voltage LEDsINH#, Reset, PWR_FAL#,
Voltage LEDs
Compatible Chassis cPCIS-6230R/64, cPCIS-6230R/64/N110
cPCIS-6400X/32,cPCIS-6400U/32 series
cPCIS-6400X,cPCIS-6400U series
cPCIS-3140,cPCIS 3330/64 series
cPCIS-2642/2842, cPCIS-2501, cPCIS-5040, cPCIS-5080 - -
3U Power Backplane
Model Name
cBP-306X Series
cBP-3061, cBP-3062A,cBP-3063, cBP-3064
Form Factor PICMG 2.11, 47-pin Power
PICMG Standards 2.0 R3.0, 2.11 R1.0
Dimensions (W x H)
40.64 / 80.28 / 120.92 / 161.56 x 128.7 mm
AC/DC Input Screw Terminals
Yes
DC Output(ATX connector)
1 / 2 / 3 / 4
Cascading Current Sharing
Yes
Cascading Voltage Sense
Dedicated voltage sense connector
INH#/FAL#/DEG# Distribution
Built-in ATX connector (cBP-3061), Selectable common INH#/FAL#/DEG# or separated INH# for each power module,
dedicated connector
PICMG 2.9 IPMB Socket
No / Yes / Yes / Yes
Chassis or Sub-systems
cPCIS-ET1102/R, cPCIS-2501,cPCIS-ET2632/R, cPCIS-2632/2832,
cPCIS-2642R/2842R
CompactPCI Backplanes
P 25
cPCI-7432/7433/7434
64-CH Isolated Digital I/O Modules5000VRMSSink current up to 500mA on each isolated outputRear I/O available on cPCI-7432R, 7433R, 7434R
Ordering InformationcPCI-7432: 32-CH Isolated DI & 32-CH Isolated DO CardcPCI-7433: 64-CH Isolated DI CardcPCI-7434: 64-CH Isolated DO CardcPCI-7434P: 64-CH Isolated DO Card with Source Current Transistor
cPCI-3E10/3E12
3U CompactPCI 2/4-Port Gigabit Ethernet Card
PICMG 2.0 R3.0 compliantSupports 32bit/33MHz, 66bit/64MHz CompactPCI bus3U 4HP form factor, 100mmx160mm (LxW)Two or four RJ-45 10/100/1000BASE-T ports on front panelIntel 82574L Gigabit Ethernet controllersTwo LAN ports switchable to rear (cPCI-3E10 only)OS support: Windows XP/Vista/7/Server 2003/Server 2008, RHEL 5.1
Ordering InformationcPCI-3E10: 3U cPCI four port RJ-45 LAN card, two ports switchable to rear, EN 50155 CompliancecPCI-3E12: 3U cPCI two port RJ-45 LAN cardcPCI-R3E10: RTM for cPCI-3E10 with two RJ-45 LAN ports in 50mm depthcPCI-R3E10T: RTM for cPCI-3E10 with two RJ-45 LAN ports in 80mm depth
cPCI-6208/6216
8/16-CH 16-Bit Analog Output ModulesBipolar analog output range4-CH TTL DI and 4-CH TTL DORear I/O available
Ordering InformationcPCI-6208V-GL: 8-CH 16-Bit Voltage Output ModulecPCI-6216V-GL: 16-CH 16-Bit Voltage Output Module
cPCI-8301
3U CompactPCI Single 64-bit PMC Carrier Board
PICMG 2.0 32,64-bit/33,66 MHz cPCI busSupports one single-size 32,64-bit/33,66 MHz PMC site in 4HP widthUniversal V(I/O) decided by backplaneComprehensive EMC shielding
Ordering InformationcPCI-8301: 3U cPCI single PMC slot carrier boardcPCI-8301/6U: 6U cPCI single PMC slot carrier board
XMC-G745Graphics XMC module with NVIDIA GeForce GT745M GPU
XMC-G745: XMC module with NVIDIA GeForce GT745M GPUVITA 42.3 XMC standard compliant NVIDIA GeForce GT 745M with 384 CUDA cores2GB GDDR5 with 2000MHz memory clock at 128-bit widthSupports PCI Express x1, x4, x8
Ordering InformationXMC-G745-A: Air cooled XMC module with NVIDIA GT745M GPUXMC-G745-R: Conduction cooled XMC module with NVIDIA GT745M
cPCI-3W10
3U CompactPCI Mini PCI, Mini PCIe Carrier BoardSupports 32-bit, 33/66MHz CompactPCI busOne Mini PCI and one Mini PCIe socketOne SIM card socket
Ordering InformationcPCI-3W10: 3U CompactPCI Mini PCI, Mini PCIe Carrier Board
cPCI-7841
Dual-port Isolated CAN Interface CardsPICMG 2.0 Rev 2.1Dual-independent CAN network operationUp to 1 Mbps programmable transfer rate16 MHz CAN controller frequency2500 VRMS optical isolationDirect memory mapping to the CAN controllersPowerful master interface for CAN bus protocolsRear I/O available on cPCI-7841R
Ordering InformationcPCI-7841: Dual-port isolated CAN interface cardcPCI-7841R: Dual-port isolated CAN interface card with rear I/O support
cPCI-3544
4-Port RS-422/485 Isolated Serial Communications Card
32-bit CompactPCI, PICMG 2.0 Rev 2.1Plug-and-play, IRQ & I/O address automatically assigned by PCI BIOSFour asynchronous communications ports with intelligent bufferFour RS-422/485 ports2500 VRMS isolation voltageSupports multiple OSSurge protectorsRugged DB37 connector
Ordering InformationcPCI-3544: Isolated 4-port RS-422/RS-485 serial communications module, EN 50155 CompliancecPCI-3544R: Isolated 4-port RS-422/RS-485 serial communications module with rear I/O support
cPCI-9116
64-CH 16-Bit 250kS/s Multi-Function DAQ Card16-bit A/D and sampling rate up to 250kS/sOn-board 1k-sample A/D FIFOProgrammable gains of x1, x2, x4, x8512-configuration channel-gain queue
Ordering InformationcPCI-9116:64-CH16-Bit 250kS/s Multi-Function DAQ Card
PMC-8246
Dual-Gigabit Ethernet PCI-X PMC Module with Failover Function
Dual-Gigabit Ethernet portsSupports PCI-X bus up to 133 MHzFailover capability during system power off or software haltSoftware programmable failover controlDIP Switch selectable failover controlProgrammable watchdog timer, WDT status read-backIntel PMC Module Boot Agent BIOS
XMC-E540
Dual-port 10GBASE-T Ethernet XMC ModuleIntel® 10Gigabit Ethernet Controller X540Dual-port RJ-45 copper interface at 10G/1G/100MbpsIEEE 802.3an 10GBASE-T, IEEE 802.3, 100/1000BASE-T compliantPCI Express v2.1 x1/x2/x4/x8VMDq1, VMDq and PCI-SIG SR-IOV virtualization
Ordering InformationXMC-E540: Dual-port 10GBASE-T 10Gigabit Ethernet XMC module
cPCI-7300
32-CH 80 MB/s High-Speed Digital I/O Module
Multiple I/O port configurations: 16-CH DI & 16-CH DO, 32-CH DI, or 32-CH DOUp to 80MB/s transfer rateScatter-gather DMAOn-board 32k words FIFO
Ordering InformationcPCI-7300: 32-CH 80 MB/s High-Speed Digital I/O Module
cPCI-8602
6U CompactPCI Dual-slot 64-bit PMC Carrier BoardPICMG 2.0 32,64-bit/33,66 MHz cPCI busPICMG 2.1 Hot Swap Specification CompliantSupports two single-size 32,64-bit/33,66 MHz PMC sites in 4HP width3.3V or 5V V(I/O) for cPCI bus and PMC sitesPLX PCI-to PCI bridge PCI6154 for PCI busPower and HotSwap LED incidators on front panel
Ordering InformationcPCI-8602: 6U cPCI dual PMC slot carrier board
Peripheral Cards
Singel 3 | B-2550 Kontich | Belgium | Tel. +32 (0)3 458 30 33 | [email protected] | www.alcom.be
Rivium 1e straat 52 | 2909 LE Capelle aan den Ijssel | The Netherlands | Tel. +31 (0)10 288 25 00 | [email protected] | www.alcom.nl