Slide 1

Vibration & Temperature Sensor

Slide 2

Contents Why monitor vibration? Monitor a wide range of machines Vibration measurements Set alarm levels Mounting options Select a Node Select thresholds Predictive maintenance monitoring Battery life Models Specifications

Slide 3

Why Monitor Vibration? Predictive maintenance Vibration is often the result of components that are: Imbalanced Misaligned Worn Loose Improperly driven Detecting increased vibration early helps reduce machine damage and avoid failures Monitoring vibration reduces downtime Plan maintenance more efficiently Monitor machine run time

Slide 4

Monitor a Wide Variety of Machines MotorsPumps FansBlowers Compressors Gear boxes

Slide 5

Vibration Measurements RMS Velocity RMS (root-mean-square) velocity is the most common and effective measure of machine vibration severity in rotating equipment. It is an indication of the vibration energy produced by the machine It is expressed in inches per second (in/s) or millimeters per second (mm/s)

Slide 6

The Banner QM42VT1 uses a MEMS based accelerometer as its core sensing element for vibration It uses advanced signal processing techniques to output a digital signal that represents a true RMS velocity between 10 and 1,000 Hz. Vibration Measurements

Slide 7

Set Alarm Levels The ISO 10816 vibration severity chart is a well established standard that is based on historical machine vibration data. It defines acceptable limits of vibration severity, using RMS velocity, and can be used to set vibration alarm levels. Temperature alarms can be set up to 80C

Slide 8

Mounting Options Standard bracket (ships with sensor) Magnet bracket Two sided thermal transfer mounting tape

Slide 9

Mounting

Slide 10

Select Node* *Vibration sensor must be paired with a Banner Wireless Node Q45 Easily connect to vibration sensor using the 5-pin M12 Euro connector Set thresholds using DIP switches Built in LED light is pre-mapped to illuminate amber when the vibration threshold has been exceeded and red when the temperature threshold has been exceeded 2.4 GHz P6 Performance Easily connect to vibration sensor using the 5-pin M12 Euro connector LCD display Star topology allows for up to 47 monitoring points Available in 900 MHz (1 Watt) and 2.4 GHz H6 Multihop Easily connect to vibration sensor using the 5-pin M12 Euro connector LCD display Tree topology allows for multiple hops to cover longer distances and circumvent obstacles Available in 900 MHz (1 Watt) and 2.4 GHz

Slide 11

Select Vibration Threshold Vibration thresholds are DIP switch selectable on the Q45 Use UCT to set the temperature threshold and vibration thresholds for the P6 and H6

Slide 12

Predictive Maintenance Monitoring Local indication ((( Send threshold signal to a central location Send vibration & temp data to the control system for collection & trending

Slide 13

Battery Life Q45:P6 and H6:

Slide 14

Models 1- Wire Serial

Slide 15

Vibration Sensor Specifications

Slide 16