web tew 658brm
TRANSCRIPT
-
8/13/2019 Web Tew 658brm
1/23
TEW-658BRM
1.01
Gua de instalacin rpida
-
8/13/2019 Web Tew 658brm
2/23
Table of Contents
Version 02.14.2011
Espaol 1
Troubleshooting 13Wireless Tips 16
1. Antes de iniciar 12. Instalacin del Hardware 73. Configuracin des Mdem 8
-
8/13/2019 Web Tew 658brm
3/23
1. Antes de iniciar
Requisitos de instalacin
Contenidos del paquete
1
Un PC con adaptador de red almbrico o inalmbrico instalado de maneracorrecta
Navegador Web como Internet Explorer 6.0 y superior, Firefox 2.0 o superior, oChrome
Una conexin a Internet DSL que funciona
CD-ROM (gua del usuario)
Cable de telfono RJ-11 (1mts/3pies) Adaptador de alimentacin (12V DC, 1A)
TEW-658BRM
Gua de instalacin rpida multilingeCable de red (1.5mts/4.9pies)
-
8/13/2019 Web Tew 658brm
4/232
Por favor, verifique su Internet DSL de banda ancha tipo de conexin con su ISP yasegurarse de que tiene toda la informacin para uno de los siguientes tipos de
conexin:
1. PPPoE (RFC-2516 PPP sobre Ethernet) VPI: _____ (0~255) VCI: _____ (32~65535) Encapsulacin (LLC o VCMUX) ATMQoS (UBR, CBR, VBR-nrt, VBR-rt) Velocidad mxima de celda (PCR): _____ (0~6000 celdas/s) Tamao mximo de la rfaga (Burst Size): _____ (0-65535 Celdas)
(Slo VBR-nrt/VBR-rt ATMQoS) Velocidad media de celdas: _____ (0~65535 celdas)(Slo VBR-nrt/VBR-rt ATMQoS)
Habilitar LAN por defecto (Activar/desactivar) PPPoE PassThrough (Activar/desactivar) Estado de la conexin (Activar/desactivar) Modo IP de conexin (Dinmica /Esttico) Direccin IP: _____. _____._____._____ (Slo modo IP esttico) Mscara de subred: _____. _____._____._____ (Slo modo IP esttico)
Nombre: ________________NAT (Activar/desactivar)Nombre de Usuario: ___________________________User Contrasea: ________________Confirm Contrasea: ________________Max MRU: _____ (576~1492)DNS Enabled (Activar/desactivar)
DNS Sobreride Allowed (Activar/desactivar)Direccin 1 de servidor DNS: _____. _____._____._____ (opcional)Direccin 2 de servidor DNS: _____. _____._____._____ (opcional)Nombre del servicio PPPoE: ________________ (opcional)direccin Mac: ________________Nombre PPPoE CA:________________ (opcional)Disparador de conexin (OnDemand/ AlwayOn/ Manual)Tiempo de desconexin por inactividad (30~3600 segundos)Como ruta predeterminada del sistema (Configuracin actual : pppoe )(Configuracin" Configuracin de Internet)Habilitar ICMP de respuesta (Configuracin" Configuracin de Internet)Intervalo LCP (0~86400 segundosHabilitar Proxy ARP
Buscar informacin sobre el proveedor de servicios de Internet (ISP)
-
8/13/2019 Web Tew 658brm
5/233
2. PPPoA (RFC-2364 PPP sobre ATM) VPI: _____ (0~255) VCI: _____ (32~65535) Encapsulation (LLC o VCMUX)
ATMQoS (UBR, CBR, VBR-nrt, VBR-rt) Velocidad mxima de celda (PCR): _____ (0~6000 celdas/s) Tamao mximo de la rfaga (Burst Size): _____ (0-65535 Celdas)(Slo VBR-
nrt/VBR-rt ATMQoS) Velocidad media de celdas: _____ (0~65535 celdas)(Slo VBR-nrt/VBR-rt ATMQoS)
Habilitar LAN por defecto (Activar/desactivar) PPPoE PassThrough (Activar/desactivar) Estado de la conexin (Activar/desactivar) Modo IP de conexin Dinmica Esttico Direccin IP: _____. _____._____._____ Mscara de subred: _____. _____._____._____ Nombre: ________________ NAT (Activar/desactivar) Nombre de Usuario: ________________ User Contrasea: ________________ Comprobar Contrasea: ________________
Max MRU: _____ (576~1492) DNS Enabled (Activar/desactivar) DNS Sobreride Allowed (Activar/desactivar) Direccin 1 de servidor DNS: _____. _____._____._____ (opcional) Direccin 2 de servidor DNS: _____. _____._____._____ (opcional) Disparador de conexin (OnDemand/ AlwayOn/ Manual) Tiempo de desconexin por inactividad (30~3600 segundos) Intervalo LCP: _____ (0~86400 segundos) As system default route (Current setting : pppoe ) (Setup" Interent Setup) Habilitar ICMP de respuesta (Setup" Interent Setup) Habilitar Proxy ARP
3. IPoA (RFC-1483 Routed) VPI: _____ (0~255) VCI: _____ (32~65535) Encapsulation (LLC or VCMUX)
ATMQoS (UBR, CBR, VBR-nrt, VBR-rt) Velocidad mxima de celda (PCR): _____ (0~6000 celdas/s)
-
8/13/2019 Web Tew 658brm
6/23
-
8/13/2019 Web Tew 658brm
7/235
Direccin 2 de servidor DNS: _____. _____._____._____ (opcional) Mac Address: ________________ Option 125 (Activar/desactivar) Option 60 Vendor ID: _____ (opcional)
Option 61 IAID: _____ (opcional) Option 61 DUID : _____ (opcional) As system default route (Current setting : pppoe ) (Setup" Interent Setup) Habilitar ICMP de respuesta (Setup" Interent Setup) Habilitar Proxy ARP ICMP Reply Enable (Setup" Interent Setup) Proxy ARP Enable
5. Direccin IP esttica VPI: _____ (0~255) VCI: _____ (32~65535) Encapsulation (LLC or VCMUX) ATMQoS (UBR, CBR, VBR-nrt, VBR-rt) Velocidad mxima de celda (PCR): _____ (0~6000 celdas/s) Tamao mximo de la rfaga (Burst Size): _____ (0-65535 Celdas)(Slo
VBRnrt/VBR-rt ATMQoS) Velocidad media de celdas: _____ (0~65535 celdas)(Slo VBR-nrt/VBR-rt
ATMQoS) Habilitar LAN por defecto (Activar/desactivar) PPPoE PassThrough (Activar/desactivar) Estado de la conexin (Activar/desactivar) Nombre: ________________ NAT (Activar/desactivar) Address Type (DHCP/Esttico) External Direccin IP: _____. _____._____._____ Mscara de subred: _____. _____._____._____ Default Gateway:_____. _____._____._____ DNS Enabled (Activar/desactivar) DNS Sobreride Allowed (Activar/desactivar) Direccin 1 de servidor DNS: _____. _____._____._____ (opcional) Direccin 2 de servidor DNS: _____. _____._____._____ (opcional) Mac Address: ________________ As system default route (Current setting : pppoe ) (Setup" Interent Setup) Habilitar ICMP de respuesta (Setup" Interent Setup) Habilitar Proxy ARP
-
8/13/2019 Web Tew 658brm
8/236
6. Modo de puente (RFC-1483 Bridged) VPI: _____ (0~255) VCI: _____ (32~65535)Encapsulation (LLC or VCMUX) ATMQoS (UBR, CBR, VBR-nrt, VBR-rt)
Velocidad mxima de celda (PCR): _____ (0~6000 celdas/s) Tamao mximo de la rfaga (Burst Size): _____ (0-65535 Celdas)(SloVBR-nrt/VBR-rt ATMQoS)
Velocidad media de celdas: _____ (0~65535 celdas)(Slo VBR-nrt/VBR-rt ATMQoS)
Habilitar LAN por defecto (Activar/desactivar) PPPoE PassThrough (Activar/desactivar) Estado de la conexin (Activar/desactivar) Nombre: ________________
7. CIP (RFC-1577 Classic IP/ARP sobre ATM) VPI: _____ (0~255) VCI: _____ (32~65535) Encapsulation (LLC or VCMUX) ATMQoS (UBR, CBR, VBR-nrt, VBR-rt) Velocidad mxima de celda (PCR): _____ (0~6000 celdas/s) Tamao mximo de la rfaga (Burst Size): _____ (0-65535 Celdas)(Slo
VBR-nrt/VBR-rt ATMQoS) Velocidad media de celdas: _____ (0~65535 celdas)(Slo VBR-nrt/VBR-rt ATMQoS)
Habilitar LAN por defecto (Activar/desactivar) PPPoE PassThrough (Activar/desactivar) Estado de la conexin (Activar/desactivar) Nombre: ________________ NAT (Activar/desactivar) Address Type (DHCP/Esttico) External Direccin IP: _____. _____._____._____ Mscara de subred: _____. _____._____._____ Default Gateway:_____. _____._____._____ DNS Enabled (Activar/desactivar) DNS Sobreride Allowed (Activar/desactivar) Direccin 1 de servidor DNS: _____. _____._____._____ (opcional) Direccin 2 de servidor DNS: _____. _____._____._____ (opcional) As system default route (Current setting : pppoe )
(Setup " Interent Setup) Habilitar ICMP de respuesta (Setup" Interent Setup) Habilitar Proxy ARP
-
8/13/2019 Web Tew 658brm
9/237
2. Instalacin del Hardware
3. Conecte el adaptador de alimentacin AC alTEW-658BRM y luego a una toma de corriente.Presione el botn de encendido para llevarlo ala posicin de encendido On. Esperealrededor de 20 segundos.
2. Conecte la punta del cable RJ-11 a uno de lospuertos ADSL del TEW-658BRM. Conecte laotra punta del cable al jack telefnico.
1. Conecte la punta del cable RJ-45 a uno de lospuertos LAN del TEW-658BRM. Conecte laotra punta del cable al puerto Etnernet del PC.
4. Compruebe que las siguientes luces del panelestn encendidas: Power (Encendido)(verde),LAN 1~4 (verde) (el puerto de su PC estconectado a), Wireless (verde) y DSL (verde).Consulte la seccin de resolucin deproblemas para ms informacin adicionalsobre el comportamiento de los LED.
-
8/13/2019 Web Tew 658brm
10/238
3. Configuracin del Mdem
Nota: Se le recomienda configurar el Mdem desde un PC por cableado.
1. Abra el navegador Web, introduzcahttp://192.168.10.1 en la barra de direcciones,
luego pulse la teclaEnter (Intro).
2. Introduzca elUser Nombre (Nombre deUsuario) y Password (contrasea), y despuspulse OK. Por defecto:User Nombre:adminPassword: admin
Nota: La contrasea por defecto es casosensible.
3. El asistente le aparecer automticamente.Haga clic enSetup Wizard (Configurarasistente) si el asistente no le aparece demanera automtica.
4. Seleccione PVCO y haga clic enNext (Siguiente).
-
8/13/2019 Web Tew 658brm
11/239
Nota: Dans l'exemple, la connexion DSL est PPPoE.
6. Seleccione la conexin ADSL deseada ydespus pulse Next (Siguiente).
5. Establezca las opciones de configuracintomando como base la informacinsuministrada por su ISP. Luego, haga clic enNext (Siguiente).
7. Establezca las opciones de configuracintomando como base la informacinsuministrada por su ISP. Luego, haga clic enNext (Siguiente).
En la mayora de los casos para el mtodo deconexin PPPoE slo necesita configurar lassiguientes configuraciones predeterminadas.Nombre de UsuarioUser ContraseaMac Address (Clon de Mac)
Si selecciona Static (Esttico) para el Modo IPde conexin necesitar configurar lo siguiente:
Direccin IP: La direccin IP asignada debeser la misma que la de su red. Esta direccin IPno podr ser usada por ningn otro dispositivode red dentro de su red.
Mscara de subred : En la mayora de loscasos, el valor predeterminado de la mscarade subred (255.255.255.0) estara bien.
-
8/13/2019 Web Tew 658brm
12/2310
8. Configure the following for Wireless BasicSetting and Despus pulseNext (siguiente).
Dispositivo: Marque Enable (Habilitar).Uncheck Enable if you do not want any wirelesscomputers or device to connect to this device.
SSID: El SSID es el nombre de red inalmbricade su red inalmbrica (Enrutador inalmbrico opunto de acceso inalmbrico. No utilice nadaque pueda ser identificable como Red de laFamilia Smith. Elija algo que pueda identificarcon facilidad cuando busque una redinalmbrica disponible.
Canal inalmbrico : En la mayora de loscasos, el canal predeterminado est bien.
Modo inalmbrico: En la mayora de loscasos, el predeterminado est bien.
Nota:
1. Para proteger su red de cualquier acceso no autorizado se le recomienda habilitar laencriptacin inalmbrica
2. Tan pronto se active la encriptacin en el enrutador, cada PC y dispositivoinalmbrico deber configurarse con la misma clave de encriptacin.
3. El ejemplo que se presenta a continuacin es para la seguridad WPA2-PSK .Siselecciona WPA-PSK o WPA2-PSK, compruebe que sus adaptadoresinalmbricosson compatibles con WPA o WPA2.
Nota:1. Para el Disparador de conexin, seleccione Continua para mantener siempre activa
la conexin a Internet.2. El tiempo de inactividad le permite configurar el tiempo de desconexin automtica
en segundos (30-3600) The TEW-658BRM will automatically disconnect from theInternet if no Internet activity has been detected within the period of Idle Disconnectentered.
-
8/13/2019 Web Tew 658brm
13/2311
9. Configure lo siguiente para la configuracin deseguridad:
Modo de seguridad : WPA2
Tipo de autenticacin : PSKTipo de encriptacin : AESIntervalo de tiempo para cambiar la clave(Group Rekey Time
Contrasea confirmada : Introduzca una clavede encriptacin Por ejemplo: trendnet
Despus pulse Next (siguiente). Para WPA-PSKo WPA2-PSK, la clave precompartida debetener entre 8 y 63 caracteres ASCII o 64caracteres HEX. Asegrese de copiar la clavede encriptacin.
) En la mayora de loscasos, el tiempo por defecto est bien
10. Haga clic enOK (Aceptar).
11. Haga clic enReboot (Reiniciar).
12. Haga clic enOK (Aceptar).
13. Haga clic enOK (Aceptar).
-
8/13/2019 Web Tew 658brm
14/2312
14. Espere mientras se reinicia el TEW-658BRM.
15. Haga clic enFinish (Finalizar).
16. Compruebe que las siguientes luces del panelestn encendidas:DSL(verde) yInternet (verde).
17. Abra su navegador y escriba un URL (Ej.www.trendnet.com) para comprobar que tieneconexin a Internet.
La configuracin inalmbrica ha finalizadoPara obtener informacin ms detallada sobre la configuracin as como de lasconfiguraciones avanzadas del , por favor consulte la seccin de resolucinde problemas, el CD-ROM de la Gua del Usuario, o el sitio Web de TRENDnet en
http://www.trendnet.com.
Registre su productoPara asegurar los ms altos niveles de servicio y apoyo al cliente, registre su producto enlnea en: www.trendnet.com/register Gracias por elegir TRENDnet
TEW-658BRM
-
8/13/2019 Web Tew 658brm
15/23
-
8/13/2019 Web Tew 658brm
16/23
-
8/13/2019 Web Tew 658brm
17/23
5. LED behavior
15
If you still encounter problems or have any questions regarding theTEW-658BRM, please contactTRENDnet's Technical Support Department.
LED
Power
LAN 1-4
Wireless
WPS
DSL
Internet
Activity Status
Off Device is off
On (solid) Device is on
Off No active device is connected
On (solid) Active device is connected, no activity
On (blinking) Active device is connected with activity (data transfers)
Off Wireless network turned off
On (blinking) Wireless network is on
Off WPS feature is inactive
On (blinking) WPS authentication in process
On (solid) WPS authentication process complete
Off RJ-11 cable disconnected
On (blinking) DSL authentication in process, data transfer activityOn (solid)
Off
DSL authentication process complete
On (blinking) Internet data transfer activity
No DSL authentication
On (solid) Internet connection ready
-
8/13/2019 Web Tew 658brm
18/23
Wireless Tips
The following are some general wireless tips to help minimize the impact of interference within anenvironment.
Assign your network a unique SSID Do not use anything that would be identifying like Smith Family Network. Choosesomething that you would easily identify when searching for available wireless networks.
Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues.The preferred method of securing a wireless network is to choose a strong form of encryptionwith a strong and varied encryption key.
Change the channel Most wireless access points and routers are defaulted to channel 6. If you have a site surveytool that will display the channels you can plan your channel selection around neighboringaccess points to minimize interference from them. If your site survey tool does not displaythe channel try using channels 1 or 11.
Change the channel bandwidthIf you are using 802.11n you should be securing the network with WPA2-AES security.
Avoid stacking hardware on top of each other to prevent overheating issues Maintain enough free space around the hardware for good ventilation and airflow. Thereshould also be plenty of free space around the antennas to allow the wireless signal to
propagate. Please also make sure that the wireless hardware is not placed in any type ofshelving or enclosures.
There are a number of other environmental factors that can impact the range of wirelessdevices.
1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than atan angle. The more material the signal has to pass through the more signal you will lose.
2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range ofa wireless device. Position the wireless devices in a manner that will minimize the amountof obstructions between them.
Note: after setting up the SSID, encryption type and encryption key/passphrase, pleasemake a note of them for future reference. You will need this information to connect your
wireless computers to the wireless router/access point.
Note: Due to Wi-Fi certification considerations if you choose WEP, WPA or WPA2-TKIPencryption this device may operate in legacy wireless mode (802.11b/g). You may not get802.11n performance as these forms of encryption are not supported by the 802.11nspecification.
16
-
8/13/2019 Web Tew 658brm
19/23
3. Building materials can have a large impact on your wireless signal. In an indoorenvironment, try to position the wireless devices so that the signal passes through lessdense material such as dry wall. Dense materials like metal, solid wood, glass or evenfurniture may block or degrade the signal.
4. Antenna orientation can also have a large impact on your wireless signal. Use the wirelessadapter's site survey tool to determine the best antenna orientation for your wirelessdevices.
5. Interference from devices that produce RF (radio frequency) noise can also impact yoursignal. Position your wireless devices away from anything that generates RF noise, suchas microwaves, HAM radios, Walkie-Talkies and baby monitors.
6. Any device operating on the 2.4GHz frequency will cause interference. Devices such as
2.4GHz cordless phones or other wireless remotes operating on the 2.4GHz frequencycan potentially drop the wireless signal. Although the phone may not be in use, the basecan still transmit wireless signals. Move the phone's base station as far away as possiblefrom your wireless devices.
If you are still experiencing low or no signal consider repositioning the wireless devices or installingadditional access points. The use of higher gain antennas may also provide the necessarycoverage depending on the environment.
17
-
8/13/2019 Web Tew 658brm
20/23
-
8/13/2019 Web Tew 658brm
21/23
-
8/13/2019 Web Tew 658brm
22/23
-
8/13/2019 Web Tew 658brm
23/23