DMU 210 / 270 / 340 P

DMU 210 / 270 / 340 FD

DMC 210 / 270 / 340 U

DMC 210 / 270 / 340 FD

Large 5-axis Machines

www.dmgmori.com

DMU P / FD, DMC U / FDPortal SERIES

Digest Edition

DMG MORI CO., LTD.

Nagoya Head Office □ 2-35-16 Meieki, Nakamura-ku, Nagoya City, Aichi 450-0002, Japan Phone: +81-52-587-1811Tokyo Global Headquarters □ 2-3-23, Shiomi, Koto-ku, Tokyo 135-0052, Japan Phone: +81-3-6758-5900

Iga Campus □ 201 Midai, Iga City, Mie 519-1414, Japan Phone: +81-595-45-4151Nara Campus □ 362 Idono-cho, Yamato-Koriyama City, Nara 639-1183, Japan Phone: +81-743-53-1121

The DMU P / FD and DMC U / FD Portal Series models, which have sold more than 1,000 units by now, are 5-axis machines with a highly stable bridge-type structure achieving unmatched machining precision and dynamic performance. In addition to a large axis travel of up to 3,400 mm (133.8 in.) and a table loading capacity of up to 16,000 kg (35,200 lb.), the innovative structure that enables 5-face / 5-axis milling in one setup can ensure enhancement of productivity.

DMU P / FD, DMC U / FD Portal SERIES

Outstanding feedrateProcess integration by multi-axis function

Authentic 5-face / 5-axis simultaneous machining

DMG MORI Large 5-axis Machines with Overwhelming Superiority

Max. acceleration : 0.6 G

Rapid traverse rate: 60 m/min (2,362.2 ipm)

The 5-axis concept created by the cutting-edge and excellent precision machining technology of Germany has established a completely new standard. The 5-face machining and simultaneous 5-axis machining achieved by the spindle head technology meet the needs of various customers all over the world.

The series ensures the highest level of precision and dynamic performance (acceleration of up to 0.6 G) to achieve high-speed machining. The enhanced feedrate and spindle speed dramatically reduce machining time compared to the conventional machining method.

Complete machining of milling and turning is possible in one clamp. Machining which used to be done with multiple machines now can be performed on one machine, achieving space saving and reduction in capital investment costs.

Machining Performance of Four 5-face Machines Integrated into One

×4 ×1

Suitable to large complex-shaped

partsHigh productivity boosting customers’ profit

(reduction in cutting time ＋ non-cutting time)

DMU P / FD, DMC U / FD Portal SERIES

Workpiece sam

ples (DM

U P

/ FD

, DM

C U

/ FD

Portal SE

RIE

S)

Outstanding feedrate Stable 3-point support structure

Fully-covered machine body

DMG MORI Large 5-axis Machines with Overwhelming Superiority

Max. acceleration : 0.6 G

Rapid traverse rate: 60 m/min (2,362.2 ipm)

The series employs the high-rigidity bed with a 3-point support structure which allows for easy height adjustments as against fully adjustments required of the structure with four points or more. As the base is not affected by changes over years, the series models are able to keep stable machining precision.

The machining envelope of most large bridge-type machines are generally not covered, so it can result in unclean air and floors, bringing possible health and safety issues of operators. The machine body of the DMG MORI Portal Series are fully covered to clear such issues, ensuring safe and clean work environment.

Crankcase (automobiles)

Component (aerospace)

Pelton wheel (energy)

Safe design to protect operators

from danger

Higher precision outperforming

competitors’ machines

DMC U / FD Portal SERIES Basic specifications

DMU P / FD Portal SERIES Basic specifications

DMU 210 P DMU 210 FD DMU 270 P DMU 270 FD DMU 340 P DMU 340 FD

Travel (X- / Y- / Z-axis) mm (in.) 2,100 / 2,100 / 1,250 (82.7 / 82.7 / 49.2) 2,700 / 2,700 / 1,600 (106.3 / 106.3 / 63.0) 3,400 / 3,400 / 1,600 (133.9 / 133.9 / 63.0)

Working surface mm (in.) ø 1,700 (ø 66.9) ø 1,850 (ø 72.8) ø 2,200 (ø 86.6) ø 2,600 × 2,200 (ø 102.4 × 86.6) ø 2,500 (ø 98.4)

Table loading capacity kg (lb.) 8,000 (17,600) 5,000 (11,000) 12,000 (26,400) 7,000 (15,400) 16,000 (35,200) 7,000 (15,400)

Max. workpiece size mm (in.) ø 2,500 × 1,250 (ø 98.4 × 49.2) ø 3,000 × 1,600 (ø 118.1 × 62.9) ø 3,400 × 1,650 (ø 133.8 × 64.9)

Max. spindle speed min-1 12,000 10,000

Width × depth mm (in.) 6,900 × 9,020 (271.7 × 355.1) 9,200 × 9,900 (362.2 × 389.8) 9,840 × 10,540 (387.4 × 415.0)

Mass of machine kg (lb.) 43,000 (94,600) 44,000 (96,800) 84,500 (185,900) 86,000 (189,200) 96,000 (211,200) 97,000 (213,400)

DMC 210 U DMC 210 FD DMC 270 U DMC 270 FD DMC 340 U DMC 340 FD

Travel (X- / Y- / Z-axis) mm (in.) 2,100 / 2,100 / 1,250 (82.7 / 82.7 / 49.2) 2,700 / 2,700 / 1,600 (106.3 / 106.3 / 63.0) 3,400 / 3,400 / 1,600 (133.9 / 133.9 / 63.0)

Working surface mm (in.) 1,600 × 1,400 (63.0 × 55.1) ø 1,850 (ø 72.8) 2,000 × 2,000

(78.7 × 78.7) ø 2,200 (ø 86.6) 2,500 × 2,000 (98.4 × 78.7) ø 2,500 (ø 98.4)

Table loading capacity kg (lb.) 5,000 (11,000) 4,000 (8,800) 9,000 (19,800) 6,000 (13,200) 10,000 (22,000) 6,000 (13,200)

Max. workpiece size mm (in.) ø 2,500 × 1,250 (ø 98.4 × 49.2) ø 3,000 × 1,600 (ø 118.1 × 62.9) ø 3,400 × 1,650 (ø 133.8 × 64.9)

Max. spindle speed min-1 12,000 10,000 12,000

Width × depth mm (in.) 10,290 × 11,870 (405.1 × 467.3) 11,590 × 13,050 (456.3 × 513.8) 12,540 × 13,940 (493.7 × 548.8)

Mass of machine kg (lb.) 45,000 (99,000) 46,000 (101,200) 89,500 (196,900) 91,000 (200,200) 101,000 (222,200) 102,000 (224,400)

DMG MORI CO., LTD.

Nagoya Head Office □ 2-35-16 Meieki, Nakamura-ku, Nagoya City, Aichi 450-0002, Japan Phone: +81-52-587-1811Tokyo Global Headquarters □ 2-3-23, Shiomi, Koto-ku, Tokyo 135-0052, Japan Phone: +81-3-6758-5900

Iga Campus □ 201 Midai, Iga City, Mie 519-1414, Japan Phone: +81-595-45-4151Nara Campus □ 362 Idono-cho, Yamato-Koriyama City, Nara 639-1183, Japan Phone: +81-743-53-1121

<Precautions for Machine Relocation>

EXPORTATION:All contracts are subject to export permit by the Government of Japan. Customer shall comply with the laws and regulations of the exporting country governing the exportation or re-exportation of the Equipment, including but not limited to the Export Administration Regulations. The Equipment is subject to export restrictions imposed by Japan and other exporting countries and the Customer will not export or permit the export of the Equipment anywhere outside the exporting country without proper government authorization. To prevent the illegal diversion of the Equipment to individuals or nations that threaten international security, it may include a “Relocation Machine Security Function” that automatically disables the Equipment if it is moved following installation. If the Equipment is so-disabled, it can only be re-enabled by contacting DMG MORI or its distributor representative. DMG MORI and its distributor representative may refuse to re-enable the Equipment if it determines that doing so would be an unauthorized export of technology or otherwise violates applicable export restrictions. DMG MORI and its distributor representative shall have no obligation to re-enable such Equipment. DMG MORI and its distributor representative shall have no liability (including for lost profits or business interruption or under the limited service warranty included herein) as a result of the Equipment being disabled.

+ DCG, DDM, ORC, speedMASTER, powerMASTER, 5X-torqueMASTER, ZEROCHIP, CELOS, ERGOline, SLIMline, COMPACTline, DMG MORI SMARTkey, DMG MORI gearMILL and 3D quickSET are trademarks or registered trademarks of DMG MORI CO., LTD. in Japan, the USA and other countries.

+ If you have any questions regarding the content, contact our sales representative.

+ The information in this catalog is valid as of October 2016. Designs and specifications are subject to changes without notice.

+ The machines shown in the catalog may differ from the actual machines. The location and the size of the nameplates may also differ from the actual machines, or the nameplates may not be attached to some machines.

+ DMG MORI is not responsible for differences between the information in the catalog and the actual machine.

DMUDMCPortal-EA01D

D.1610.CDT.0000

Created in Japan