wimax presentation
DESCRIPTION
ÂTRANSCRIPT
By:
Eng.Mohammed Hassan Abdul-Montakem
الكهربائية الهندسة منتدىDVD4ARAB وااللكترونية
2
Contents Broadband Wireless Accesses General Over View Of WiMAX Wimax Versus Wi-Fi 802.16 Frequency bands 802.16 Family of Standards 802.16 Applications and scenarios Components of WiMAX systems 802.16e and data mobility to the current standard System profiles for 2-11 GHZ WiMAX Applications WiMAX Forum WiMAX PHY
3
Wireless Communication
4
LOS Propagation
5
NLOS Propagation
CPE: Customer Premises Equipment
6
LOS & NLOS Operation
7
Coverage Performance Trends
8
Broadband Wireless Accesses (BWA)
BWA is a point to multipoint system, which is made up of base station and subscriber equipment
9
BWA The increased demand on multimedia services led
to the need for BWA (Broadband Wireless Access) This led to the appearance of WiMAX technology
Advantages of BWA: Fast connection (several Mbps/user) Relatively cheap (no cable infrastructure) Not limited by location (wireless links)
BWA Data services Wireless Broadband Internet
10
Worldwide Interoperability for Microwave Access
IEEE 802.16 standard (dated back to 2003) Describes PHY and MAC layers IEEE 802.16-2004 Fixed and Nomadic
applications in 2-11 GHz frequency band Several amendments have followed
(IEEE 802.16e/g)
WiMAX
11
WiMAX Applications Private Networks
Cellular backhaul Wireless service provider backhaul Education networks (university campus) Public safety (police, fire) Offshore communications (oil rigs)
Public Networks Wireless service provider access network Rural connectivity
Triple Play
12
Triple Play Appearance of VoIP made it possible for
Voice over WiMAX Voice services Appearance of IPTV made it possible for TV
over WiMAX Video services Integrated network: Data, Voice and Video + Mobility
WiMAX becomes a strong candidate for future mobile networks
13
Why do we need broadband wireless access? Fill the gap between high data rate
wireless LAN and very tight Bandwidth mobile cellular networks.
Wireless alternative to cable and DSL for last-mile broadband access Developing countries Rural areas
Provide high-speed mobile data and telecommunications services
14
General Overview Of WiMAX WiMAX (Worldwide Interoperability for Microwave Access) is the
trade name for a group of wireless technologies that emerged from the IEEE 802.16 Wireless MAN (Wireless Metropolitan Area Network) family of standards.
A key facet of the IEEE standards process is that it is limited to the Physical and MAC (Medium Access Control) layers and that it does nothing to ensure interoperability, RF constraints, or minimum performance levels
The WiMAX Forum was created in 2001 to fulfill a much needed requirement and to help ensure compatibility and interoperability across multiple vendors. .
15
General Overview Of WiMAX (Cont.)
Filling the gap between Wireless LANs and wide area networks, WiMAX-compliant systems will provide a cost-effective fixed wireless alternative to conventional wire-line DSL and cable in areas where those technologies are readily available ,and in areas beyond the reach of DSL and cable.
The ongoing evolution of IEEE 802.16 will expand the standard to address mobile applications thus enabling broadband access directly to WiMAX-enabled portable devices.
16
General Over View Of WiMAX (Cont.) WiMAX technology advantages :
The high speed of broadband service
Wireless rather than wired access, so it would be a lot less expensive than cable or DSL and much easier to extend to suburban and rural areas
Broad coverage like the cellular mobile network.
17
General Overview Of WiMAX (Cont.) To meet the requirements of different types of access, two
versions of WiMAX have been defined.
The first is based on IEEE 802.16-2004 and is optimized for fixed and nomadic access. The initial WiMAX Forum CERTIFIED products will be based on this version of WiMAX.
The second version is designed to support portability and mobility, and will be based on the IEEE 802.16e amendment to the standard
18
Mobile WiMAX Salient Features
19
WiMAX Potential Applications Connecting Wi-Fi hotspots with each other and to other parts of the
Internet. Providing a wireless alternative to cable and DSL for last mile
broadband access. Providing high-speed data and telecommunications services. Providing a diverse source of Internet connectivity as part of a
business continuity plan. Providing nomadic connectivity.
20
WiMAX applications in 2005 Fixed Services
Business servicesBusiness services
Residential FixedResidential Fixed DSL AccessDSL Access
Nomadic PCNomadic PC
WiFiWiFi
WiFi-Hotspot WiFi-Hotspot FeedingFeeding
Mobile Mobile PC/PADPC/PAD
NB orBTS
2G/3G 2G/3G FeedingFeeding Hot ZonesHot Zones
Campus Airpor
t
WiMAX Base Station
IEEE 802.16-2004IEEE 802.16-2004
21
WiMAX applications starting from 2006-2007 Nomadic, Solutions for Laptops
Business, SME, SOHO Access Business, SME, SOHO Access
Residential FixedResidential Fixed WDSL BB AccessWDSL BB Access
WiFiWiFi
WiFi-Hotspot WiFi-Hotspot FeedingFeeding
Mobile Mobile PC/PADPC/PAD
Nomadic PCNomadic PC
NB orBTS
2G/3G 2G/3G FeedingFeeding Hot ZonesHot Zones
Campus Airpor
t
WiMAX Base Station
IEEE 802.16-2004IEEE 802.16-2004& IEEE 802.16e& IEEE 802.16e
22
WiMAX applications in 2007-2008Fully Mobile, Integrated Solutions in Laptops and PDA
Business, SME, SOHO Access Business, SME, SOHO Access
Residential FixedResidential Fixed WDSL BB AccessWDSL BB Access
WiFiWiFi
WiFi-Hotspot WiFi-Hotspot FeedingFeeding
NB orBTS
2G/3G 2G/3G FeedingFeeding Hot ZonesHot Zones
Campus Airpor
t
Portable PCPortable PC
Mobile Mobile PC/PDAPC/PDAWiMAX
Base Station
IEEE 802.16eIEEE 802.16e
23
WiMAX & Other Broadband Wireless TechnologiesThere are wireless technologies other than WiMAX, each has its Pros and Cons where the tradeoff is between MOBILITY and SPEED.
24
3G /HSDPA
WiFi
WiMAX
LargeCoverage
NetworkSimplicity
BroadBand
QoSFull Mobility Security
WiMAX Positioning: Wireless Technology Comparison
25
WiMAX Speed
General packet Radio ServicesEnhanced Data Rates for GSM EvolutionEvolution Data optimized (Only)
26
IEEE Standards
27
WiMax (802.16x)Standards Genealogy
28
802.16 Standards Evolution
29
Wireless MAN operation in 2-11 GHz spectrum Non-line-of-sight (NLOS) operation designed to address multi-path Eliminates need for directional LOS propagation
Greater range and higher data rates Multiple options for: Flexible channel bandwidths from 1.75 to 20MHz Flexible frame lengths: frame sizes ranging from 2.5 to 20ms Flexible channel coding & FEC
Duplexing modes: Time Division Duplex (TDD) and Frequency Division Duplex (FDD)
Support for multiple antenna technology Adaptive and smart antennas (AAS) TX diversity Beamforming and spatial multiplexing (MIMO)
802.16 General Characteristics
30
802.16 General Characteristics (Cont)
Point-to-multipoint topology, with mesh extensions Protocol independent supporting ATM and packet-based
protocols True Quality of Service (QoS) supports multiple services
simultaneously, with different QoS priorities Scalable system capacity allows more efficient use of
available spectrum than other wireless technologies Supports both licensed and licensed-exempt frequencies Supports a variety of services such as IP, voice over IP and
streaming video Bandwidth on demand (frame by frame)
31
802.16 Family of Standards IEEE 802.16a
It was approved in January 2003 It covers frequency band between 2 GHz and 11GHz, Its lower frequencies make non-line of sight a possibility Total data rate can be up to 100 Mb/s in each 20MHz channel. It has up to 30 miles (48.28 Km) of range with a typical cell
radius of 4-6 miles. It provides an ideal wireless backhaul technology to connect
802.11 wireless LANs and commercial hotspots with the Internet.
It will be mostly used for small businesses, residential users and for backhaul or hotspot
The most common 802.16 configurations consist of base station mounted on building or tower that communicates on a point to multi-point basis with subscriber station located in businesses and homes.
32
802.16 Family of Standards (Cont.) 802.16b
Aims at the needs of license-exempt applications around 5-6 GHz 802.16c
Approved in December 2002 by the IEEE Standards Board. The aim was to develop 10-66 GHz system profiles to aid
interoperability specifications for Line-of-sight broadband wireless access.
Its peak (shared) data rate 70Mbits/s, with range up to 50km. 802.16d
It was approve by the IEEE-SA Standards Board on 24 June 2004 The aim is to implement system profiles for 802.16("Air Interface
for Fixed Broadband Wireless Access Systems") as modified by Standards IEEE 802.16a and 802.16c.
It will be published as IEEE Standard 802.16-2004, replacing IEEE Standards 802.16-2001, 802.16c-2002, and 802.16a-2003.
33
802.16 Family of Standards (Cont.) 802.16-2004
It was approved on 23rd of September 2004 by the IEEE –SA Standards Board,
Its aim is to provide a list of errors with their corrections to the IEEE Standard for Local and Metropolitan Area Networks - Part 16: Air Interface for Fixed Broadband Wireless Access Systems.
802.16/Confermance04 It was approved on 25th of March 2004 It is developed by the IEEE 802.16's Task Group C under IEEE PAR
P802.16/Conformance04. Its draft is to perform a new research for IEEE 802.16 - Part 4: Protocol
Implementation Conformance Statement (PICS) for Frequencies below 11 GHz.
34
802.16 Family of Standards (Cont.) IEEE 802.16e (Mobile Wireless MAN)
In December, 2005 the IEEE ratified the 802.16e amendment to the 802.16 standard.
It covers "Physical and Medium Access Control Layers for Combined Fixed and Mobile Operation.
The IEEE802.16e introduces nomadic capabilities which allow users to connect to a Wireless Internet Service Provider (WISP) when they travel outside their home or business, or go to another city that also has a WISP
It is targeted at mobile users, who will be able to keep their connection while moving or driving .
35
802.16e and data mobility to the current standard (Cont.)
Some of the salient features supported by Mobile WiMAX are:
High Data Rates: The inclusion of MIMO antenna techniques along with flexible sub-channelization schemes, Advanced Coding and Modulation all enable the Mobile WiMAX technology to support peak DL data rates up to 63 Mbps per sector and peak UL data rates up to 28 Mbps per sector in a 10 MHz channel.
Quality of Service (QoS): The fundamental premise of the IEEE 802.16 MAC architecture is QoS.
Scalability: Mobile WiMAX technology is designed to be able to scale to work in different channelizations from 1.25 to 20 MHz to comply with varied worldwide requirements as efforts proceed to achieve spectrum harmonization in the longer term.
36
802.16e and data mobility to the current standard (Cont.) Some of the salient features supported by Mobile WiMAX are: (Cont.)
Security: Mobile WiMAX supports best in class security features by adopting the best technologies available today. Support exists for mutual device/user authentication, flexible key management protocol, strong traffic encryption, control and management plane message protection and security protocol optimizations for fast handovers.
Mobility: Mobile WiMAX supports optimized handover schemes with latencies less than 50 milliseconds to ensure real-time applications such as VoIP perform without service degradation.
37
WiMAX Fixed WiMAX
Specified in IEEE Std 802.16 -2004.
Wide range of frequencies from 2.5,2.4,3.5,5.8 GHz.
Radio interface based on orthogonal frequency division multiplexing (OFDM).
Enables data rates theoretically up to 37.5Mbit/s with 10MHz channel bandwidth, reality closer to 2Mbit/s over 510 km radius.
Mobile WiMAX Specified in IEEE Std
802.16e. operates in the 3.5,5.8
GHz range using channel bandwidth ranging from 1.25 to 10 MHz.
Radio interface based on scalable OFDMA.
Data rates theoretically up to 12-15Mbit/s at 10 MHz.
38
WiMAX, a single technology can deliver fixed, portable & mobile services with scalable bandwidths & higher data rates
WiMAX is a well-supported, cost-effective, standards-based,
flexible, broadband technology that is ready to deliver significant benefits for:
Operators in a wide range of markets (enterprise, consumer, emerging, public service)
Over a wide range of geographies and demographics (urban, suburban, rural)
Advantages of WiMAX Large coverage Higher capacity Scalable Faster to implement Performs well in high delay spread environments Supports multiple antenna technologies
WiMAX Technology
39
WiMAX Coverage Range
40
OFDM vs CDMA OFDMA+
Slow and fast fading immunity Maximum Data Rate Frequency selective fading immunity
CDMA+ Seamless soft-handoff capability Easy network planning and re-configuration
41
WiMAX Worldwide Penetration
42
WiMax Standards802.16 802.16-2004 802.16e-2005
Date Completed December 2001 June 2004 December 2005
Spectrum 10-66 GHz < 11 GHz < 6 GHz
Operation LOS LOS & Non-LOS Non-LOS
Bit Rate 32-134 Mbps in 28 MHZ channel BW
Up to 75 Mbps in 20 MHz channel BW
Up to 15 Mbps in 5MHz channel BW
Cell Radius Over 10Km 7-10 km 2-5Km
Mobility Fixed Fixed Mobile (up to 125Km/h)
Channel BW 20,25 and 28 MHZ Scalable 1.5 to 20MHz
Scalable 1.25 to 20 MHz
Modulation Single carrier modulation
OFDM 256/OFDMA 2K
Scalable OFDMA (128-2K)
43
WiMAX Vs Wi-Fi WiMAX is targeted for longer range Metropolitan Area (indoor &
outdoor) Different from Wi-Fi, which is primarily targeted for Local Area Network (indoor) applications.
The mail distinction between WiFi and WiMAX is speed and coverage distances:
WiFi has a typical bandwidth of 2MBps whereas WiMAX can have a bandwidth of up to 75MBps.
The coverage distances also differ to a great extent. A WiFi hotspot typically covers a few hundred feet radius (fraction of a kilometer) whereas a WiMAX can practically cover up to a distance of 10 kilometers.
44
802.16 Frequency bands (Cont.)
45
802.16 Frequency bands (Cont.) Licensed Bands
The licensed spectrum is found at 2.3GHz, 2.5GHz and 3.5GHz, with the latter two frequency bands currently receiving the most attention.
Advantages of Licensed Bands The greatest advantage of having licensed spectrum is
that the licensee has exclusive use of the spectrum. It is protected from outside interference while
competitors can only enter the market if they also own or lease spectrum.
Disadvantages Licensed Bands Licensed spectrum comes at a potentially high price
46
802.16 Frequency bands (Cont.) Unlicensed Bands
In most markets, the unlicensed spectrum that could be used for WiMAX is 2.4GHz and 5.8GHz.
Advantages of Unlicensed Bands
Since the spectrum is unlicensed, the barrier to entry is low, thus making it easier for a potential operator to begin offering services using the spectrum.
47
802.16 Frequency bands (Cont.) Disadvantages of Unlicensed Bands
Interference : unlicensed spectrum can be used by several different RF systems
Increased Competition : Operators who use unlicensed spectrum have to assume that another operator could easily enter the market using the very same spectrum.
Limited Power :government regulators typically limit the amount of power than can be transmitted. especially at 5.8GHz where the higher power could offset the propagation loss associated with spectrum in higher frequencies.
Availability :While the 2.4GHz spectrum is universally available, the 5.8GHz spectrum is not currently available in a number of countries.
48
Example of WiMAX System Components
49
Base station unit A WiMAX base station consists of indoor electronics and a WiMAX tower, base station can cover up to 10 km or 6
miles radius.
Each base station provides wireless coverage over an area called a cell.
Any wireless node within the coverage area would be able to access the
Internet
50
Subscriber UnitsThere are two versions:
Indoor SU. Outdoor SU.
Indoor units are comparable in size to a cable modem or DSL modem.Outdoor units are roughly the size of a laptop PC, and their installation is comparable to a residential satellite dish. There is an increasing focus on portable units including handsets and PC peripherals.
Outdoor subscriber unit
Indoor subscriber unit
51
Outdoor CPE
52
Practical System Components
53
Practical WiMAX Systems
54
802.16 Reference Model
55
IEEE 802.16 Protocol Stack
(IEEE 802.16 is a collection of standards, not one single interoperable standard)
56
Physical Layer
It is 802.16e uses scalable orthogonal frequency-division multiple access (SOFDMA).Also bring Multiple Antenna Support through Multiple-input multiple-output communications (MIMO).This brings potential benefits in coverage:
power consumption frequency re-use. Bandwidth efficiency.
57
Design Options for WiMAX Networks The various IEEE 802.16 standards offer a variety of fundamentally different design
options: Multiple physical-layer choices:
Single-carrier-based physical layer. OFDM-based physical layer . OFDMA based physical layer.
Multiple choices for : MAC architecture. Duplexing (TDD,FDD). Frequency band of operation.
10-66GHZ (FOR LOS Operation). 2-11GHZ (FOR NLOS Operation).
So, it suit a variety of applications and deployment scenarios and offer a plethora of design choices for system developers.
58
Design Options for WiMAX Networks (Cont.) WiMAX equipment are certified for interoperability against a particular
certification profile. Design options
3.5GHz systems. Operating over a 3.5MHz channel. Use the fixed system profile based on the IEEE 802.16-2004 OFDM
physical layer . Point-to-multipoint MAC. One uses frequency division duplexing (FDD). The other uses time division duplexing (TDD).
WiMAX Physical Layer
60
Conventional Frequency Division Multiplex (FDM) Multi-carrier Modulation Technique
Saving of the bandwidth
Orthogonal Frequency Division Multiplex (OFDM) Multi-carrier Modulation Technique
OFDM Spectral Overlap
61
OFDM: Orthogonal Frequency Division Multiplexing
Is a digital multi-carrier modulation scheme. Uses a large number of closely spaced orthogonal sub-carriers where it manages the inter
symbol interference. OFDM signals are generated and detected using the Fast Fourier transform algorithm.
Orthogonality Principle: In OFDM the sub-carrier pulse used for transmission is chosen to be rectangular. According to the theorems of the Fourier Transform, the rectangular pulse shape will lead
to sinc(x) type of spectrum of the sub-carrier as shown:
Pulse Fourier transform
62
Thus, for N sub-carriers we’ll have the following spectrum
The spectrums of the sub-carriers are not separated but overlap.
The information transmitted over the sub-carriers can still be separated as the nulls in each sub-carrier’s spectrum land at the center of all other sub-carriers.
63
802.16 PHY Layer Characteristics Physical layers (SC, OFDM, OFDMA)
OFDMA is the focus today Non-line of sight operation
Multiple options for: Channel bandwidths Duplexing modes (TDD, FDD) Channel coding Cyclic prefixes
Link adaptation Adaptive modulation and coding per subscriber Trade off capacity and robustness in real time
64
RandomizerShortened
Reed SolomonEncoder
ConvolutionalEncoder Puncturer Interleaver Digital
Modulator IFFT
PreambleInsertion
Multi-pathChannel
Add CyclicPrefix
AWGN
De-RandomizerShortened
Reed SolomonDecoder
ViterbiDecoder De-Puncturer De-Interleaver Digital
De-Modulator FFT
Remove Cyclic Prefix
Data
Data Channel Estimator(LS/MMSE)
WiMAX Physical Layer Main Block Diagram
65
Randomizer
RandomizerShortened
Reed SolomonEncoder
ConvolutionalEncoder Puncturer Interleaver Digital
Modulator IFFT
PreambleInsertion
Multi-pathChannel
Add CyclicPrefix
AWGN
De-RandomizerShortened
Reed SolomonDecoder
ViterbiDecoder De-Puncturer De-Interleaver Digital
De-Modulator FFT
Remove Cyclic Prefix
Data
Data Channel Estimator(LS/MMSE)
66
Randomizer● Types of Randomizers:
- Multiplicative (self-synchronizing) scramblers
- Additive Synchronous Randomizer (modulo -2 addition)
67
Benefits of Randomization● Avoid long sequences of bits of the same
sense (i.e. increase entropy)● It facilitates the work of a timing recovery● It eliminates the dependence of a signal's
power spectrum upon the actual transmitted data (selective scrambling to avoid PAPR)
68
Benefits of Randomization● Introduce the ability to distinguish signals
by properly initializing the seed of the randomizer at the beginning of each burst (key generation )
- Unique to a BS- Unique to a connection (BS-SS)- Uncorrelated from frame to frame
69
Convolutional Coder
RandomizerShortened
Reed SolomonEncoder
ConvolutionalEncoder Puncturer Interleaver Digital
Modulator IFFT
PreambleInsertion
Multi-pathChannel
Add CyclicPrefix
AWGN
De-RandomizerShortened
Reed SolomonDecoder
ViterbiDecoder De-Puncturer De-Interleaver Digital
De-Modulator FFT
Remove Cyclic Prefix
Data
Data Channel Estimator(LS/MMSE)
70
½ Rate Convolutional Coder
● IEEE 802.16-2004 specifications:Constraint length = 7Generator polynomials codes = (171)oct =(1 1 1 1 0 0 1) for o/p X (133)oct =(1 0 1 1 0 1 1) for o/p Y
● Treated as Finite State Machine (FSM)● Illustrated using state or Trellis diagrams
71
Trellis Structure
72
Puncturer
RandomizerShortened
Reed SolomonEncoder
ConvolutionalEncoder Puncturer Interleaver Digital
Modulator IFFT
PreambleInsertion
Multi-pathChannel
Add CyclicPrefix
AWGN
De-RandomizerShortened
Reed SolomonDecoder
ViterbiDecoder De-Puncturer De-Interleaver Digital
De-Modulator FFT
Remove Cyclic Prefix
Data
Data Channel Estimator(LS/MMSE)
73
Puncturer● Puncturing is a very useful technique to
generate additional rates from a single Convolutional code
● The basic idea behind Puncturing is not to transmit some of the bits output by the Convolutional encoder
74
Puncturer● Code rates :
● Puncturing rules:- 1 Transmitted Bit- 0 Removed Bit
75
Interleaver
RandomizerShortened
Reed SolomonEncoder
ConvolutionalEncoder Puncturer Interleaver Digital
Modulator IFFT
PreambleInsertion
Multi-pathChannel
Add CyclicPrefix
AWGN
De-RandomizerShortened
Reed SolomonDecoder
ViterbiDecoder De-Puncturer De-Interleaver Digital
De-Modulator FFT
Remove Cyclic Prefix
Data
Data Channel Estimator(LS/MMSE)
76
Interleaving Block Interleaving Applied to each FEC block
Two step permutation • 1st step permutation – Mapping adjacent coded bits onto nonadjacent
subcarriers • 2nd step permutation – Mapping adjacent coded bits alternatively onto
less or more significant constellation bits
77
Interleaving (2)Error isolated
Transmission
InterleavingDe-interleaving
Error
78
Interleaver Types● Block Interleaver
● Convolutional Interleaver
● Helical Interleaver
● The IEEE 802.16d standard uses the block Interleaver
79
Digital Modulator
RandomizerShortened
Reed SolomonEncoder
ConvolutionalEncoder Puncturer Interleaver Digital
Modulator IFFT
PreambleInsertion
Multi-pathChannel
Add CyclicPrefix
AWGN
De-RandomizerShortened
Reed SolomonDecoder
ViterbiDecoder De-Puncturer De-Interleaver Digital
De-Modulator FFT
Remove Cyclic Prefix
Data
Data Channel Estimator(LS/MMSE)
80
Modulation Techniques● BPSK
● QPSK
● 16-QAM
● 64-QAM
81
Adaptive Modulation and Coding in WiMAX WiMAX supports a variety of modulation and coding schemes and allows for
the scheme to change on a burst-by-burst basis per link, depending on channel conditions.
The base station scheduler can take into account the channel quality of each user’s uplink and downlink and assign a modulation and coding scheme that maximizes the throughput for the available signal-to-noise ratio.
82
BPSK MODEM● Constellation Diagram ● Mapping Table
I-Out
Input Output
0
1
-1
1
-1 0 1
83
QPSK MODEM● Mapping Table
Input (b1b0) Output
00
01
10
11
-1-j
-1+j
1-j
1+j
84
QPSK MODEM● Constellation Diagram
I-out
Q-out
1-1
j
-j
.
.
. .
01
00
11
10
85
Modulation Schemes Quadrature amplitude modulation (QAM) a
combination of PSK and ASK (two degrees of freedom).
16-QAM (4 bits/symbol-Gray coded). 64-QAM (6 bits/symbol-Gray coded).
86
Threshold based on decision regions for 16-QAM
87
IFFT/FFT
RandomizerShortened
Reed SolomonEncoder
ConvolutionalEncoder Puncturer Interleaver Digital
Modulator IFFT
PreambleInsertion
Multi-pathChannel
Add CyclicPrefix
AWGN
De-RandomizerShortened
Reed SolomonDecoder
ViterbiDecoder De-Puncturer De-Interleaver Digital
De-Modulator FFT
Remove Cyclic Prefix
Data
Data Channel Estimator(LS/MMSE)
88
IFFT/FFT Growth
g(t)
g(t)
+
g(t)
ejw0
t
ejw1t
ejwN-1
t
Serial ToParallel
IFFTParallel
ToSerial
High speed data
89
Preamble Insertion
RandomizerShortened
Reed SolomonEncoder
ConvolutionalEncoder Puncturer Interleaver Digital
Modulator IFFT
PreambleInsertion
Multi-pathChannel
Add CyclicPrefix
AWGN
De-RandomizerShortened
Reed SolomonDecoder
ViterbiDecoder De-Puncturer De-Interleaver Digital
De-Modulator FFT
Remove Cyclic Prefix
Data
Data Channel Estimator(LS/MMSE)
90
Preamble
Preamble is used for channel estimation One preamble is used in simulation The preamble is constructed from a predefined
pattern in the standard
CP 64 64 64 64
256 + CP
91
Cyclic Prefix
RandomizerShortened
Reed SolomonEncoder
ConvolutionalEncoder Puncturer Interleaver Digital
Modulator IFFT
PreambleInsertion
Multi-pathChannel
Add CyclicPrefix
AWGN
De-RandomizerShortened
Reed SolomonDecoder
ViterbiDecoder De-Puncturer De-Interleaver Digital
De-Modulator FFT
Remove Cyclic Prefix
Data
Data Channel Estimator(LS/MMSE)
92
Cyclic Prefix (1)
Cyclic prefix
•Extension before the time domain symbol•Collect multi-path and maintain orthogonality
93
Cyclic Prefix (2)
94
Cyclic Prefix
95
Cyclic Prefix
OFD
M sym
b.
OFD
M sym
b.
CP
OFD
M sym
b.
OFD
M sym
b.
Preamble
CP CP CP CP
256 + CP
96
WiMAX system
Convolutional Encoder Interleaver IFFT CP insertion
Channel Interface
Channel
Viterbi decoder De-Interleaver FFT CP Removal
Channel Interface
Data Source
Data Destination
W(n)
Serial to parallel
Parallel to serial
Channel coding Modules OFDM Modules