xzu chap02
TRANSCRIPT
-
8/11/2019 XZU Chap02
1/7
Chapter2GOVERNMENT REGULATIONS
SAFETY STANDARDS 1
VEHICLE NOISE REGULATIONS INFORMATION 5
EMISSION CONTROL REGULATIONS 6
KK-US102A
-
8/11/2019 XZU Chap02
2/7
Chapter 2 GOVERNMENT REGULATIONS
KK-US102A
Canadian Government has established the various motor vehicle regulations regarding Safety,Noise and Exhaust emissions under the provisions of the related Acts of Congress.These regulations and Acts impose important legal responsibilities on manufacturers, dealers,body builders and other engaged in the manufacturing and marketing of motor vehicles andmotor vehicle equipment.
All incomplete vehicles manufactured by HMC for sale in Canada are conformed to complywith the applicable regulations. But, the alterations or the additions to the incomplete vehiclewill affect the vehicle specifications and performance. Therefore, it is a responsibility of theintermediate and/or final stage manufacturer to ascertain that the final completed vehicle com-plies with all applicable regulations after the alterations or the additions are completed.
The following information is intended to assist you of understanding the applicable standardsas for guide only.Detailed information of the act or the regulation should be obtained from your legal counsel orfrom the government.
New regulations and the amendments issued by Canadian Governments will be published onthe Canada Gazette from time to time. You may obtain the Canada Gazette through Canada
Communication Group-Publishing, Ottawa, Canada KIT OS9.
SAFETY STANDARDS
Motor Vehicle Safety Act and the standards and regulations issued by Transport Canada im-pose responsibilities on manufacturers, dealers, body builders and others.The following information identifies the requirements concerning certification of compliance toCanadian Motor Vehicle Safety Regulations of vehicles manufactured in two or more stages.
Compliance Statement All incomplete vehicle manufactured by HMC are complying with all applicable standards atthe time of its manufacture, and the number of each standard is mentioned in ComplianceStatement which is put in the cab of each vehicle in accordance with the provisions of MotorVehicle Safety Regulations.Therefore it is the responsibility of subsequent manufacturers to ascertain the compliance ofthe vehicle after installation, modification or alteration.
Information Label
All incomplete vehicles manufactured by HMC for sale in Canada are furnished with under theprovision of section 6 of Motor Vehicle Safety Regulations.
This label contains the statements which specify the CMVSS to which the incomplete vehicleconforms in effect on the date of manufacture.
The party installing a body or equipment to complete the vehicle for delivery will be responsibleto see that the completed vehicle meets all applicable CMVSS. For certification of compli-ance, the completed vehicle should affix a final certification label securely and permanently tothe vehicle.
-
8/11/2019 XZU Chap02
3/7
Chapter 2 GOVERNMENT REGULATIONS
KK-US102A
Vehicle Identification Number (VIN) Plate
All incomplete vehicles manufactured by HMC for sale in Canada are furnished with a VehicleIdentification Number (VIN) Plate under the provision of CMVSS 115.
The VIN Plate affixed by HMC should not be removed, altered or replaced.
Structure of Vehicle Identification Number (VIN)Vehicle Identification Number (VIN) comprises of 17 characters.The VIN plate, as shown below, is affixed to the left-side B pillar of the cab.
The VIN plate for vehicle manufactured by HMC
-
8/11/2019 XZU Chap02
4/7
Chapter 2
KK-US102A
HINO VEHICLE IDENTIFICATION NUMBER (VIN) STRUCTURE
2 A
WMI VDS
Y Y X 2 1 H
VIS
9 9 0 0 0 0 0 1
CD
8
SECTION REF. MEANING CHARACTER
Hino Motor CANADA,LTD.
Wide cabin, 2810mm, 2WD, VSWide cabin, 3430mm, 2WD, VSWide cabin, 3870mm, 2WD, VSWide cabin, 4200mm, 2WD, VS
J05D - TF
401L411L
421L431L
Double 6.5t
HINO 300 Series
2009201020112012
Canada Plant
HIno's serial number
2AY
TUYZ
X
01
23
1
H
1 to 9, or X
9ABC
9
000000 999999
Manufacturer,Make
Cab type,Wheelbase,Brake System
Engine Model
Model number
Tire,GVWR,
Car line,Series
Check Digit
Model year
Assembly Plant Code
Plant serial number
1-3
4
5
6
7
8
9
10
11
12 - 17
WMI
VDS
VIS
-
8/11/2019 XZU Chap02
5/7
Chapter 2 GOVERNMENT REGULATIONS
KK-US102A
VIN Plate and Information Label
All incomplete vehicles manufactured by HMC for sale in Canada are provided with VIN Plateand Compliance Statement under the provision of the Canadian Motor Vehicle Safety Regula-tions.The VIN Plate is located on the position indicated in the following figures.The Compliance Statement is enclosed in the overhead console box at the side of the driversseat.
-
8/11/2019 XZU Chap02
6/7
Chapter 2 GOVERNMENT REGULATIONS
KK-US102A
VEHICLE NOISE REGULATIONS INFORMATION
Exterior Noise Regulations Applicable to Sale of New Vehicle
Transport Canada has established Noise Emission Standards applicable to the Medium-dutyand Heavy-duty trucks {in excess of 4,536kg (10,000lb) GVWR} under the provisions of MotorVehicle Safety Standard 1106.The standards provide that vehicles manufactured, when tested pursuant to Part 205 of Title40, Code of Federal Regulation (USA), must conform to 80 dB(A) level, and when tested withECE. No. 51, must conform to 81 dB(A) (
-
8/11/2019 XZU Chap02
7/7