Adrian Martinez

Fokker Dr.1 Triplane

VIEW IN BROWSER

updated 16. 7. 2019 | published 16. 7. 2019

PRUSAPRINTERS

Summary

This is a model of the Fokker Dr.1 triplane. The red baron plane.

It comes in 3 different filament colors: RED, WHITE and BLACK. The redbody does need supports for the sticks of the wings to be holdedpropperly. The black and white parts fit into the holes just fine and goesglued in place.

The propeller is holded by 2 white pieces that screw on place (notnecessary to be glued) And then the black crosses, as well as the machineguns, are glued into the body.

Toys & Games > Vehicles

baronrojo rojo dr1 baron redbaron triplano triplane

fokker

It comes in 3 different filament colors: RED, WHITE and BLACK. The redbody does need supports for the sticks of the wings to be holded

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

8.0 MBupdated 16. 7. 2019

11.1 MBupdated 16. 7. 2019

3.2 MBupdated 16. 7. 2019

propperly. The black and white parts fit into the holes just fine and goesglued in place.

The propeller is holded by 2 white pieces that screw on place (notnecessary to be glued) And then the black crosses, as well as the machineguns, are glued into the body.

Find source .stl files on Thingiverse.com

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

01_red-part.stl

02_white-part.stl

03_black-part.stl

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition