zidna polica
TRANSCRIPT
-
8/9/2019 zidna polica
1/17
Project: Wall Shelf Page 1 of 17
Wall Shelf
You can use various types of wood for this project manufacture. We recommend purchasingsome wood with a nice, interesting texture like ash, beech, cedar, birch, cherry, maple, oak, walnut,
etc. If you are planning to paint the Wall Shelf by yourself, the texture of wood is not important.Make all the items precisely by the measurements given on particular 2D drawings. Themeasurements are given in millimeters, and the measurements in inches are given in brakes (1 inch =25, 4 mm).
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
2/17
ProParts list
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
3/17
ProAssembly Drawing
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
4/17
Pro
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
5/17
Pro
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
6/17
Pro
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
7/17
Pro
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
8/17
Pro
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
9/17
Pro
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
10/17
Proje
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
11/17
Proje
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
12/17
ProjeStandard Parts
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
13/17
Project: Wall Shelf Page 13 of 17
Assemblage Instructions
1. Attach the Front (item 5) to the Side Mirror (item 7) with glue by using Dowel Pins D6mm (item 6).
2. Attach the Round Bars (item 4) to the subassembly made in the previous step with glue.
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
14/17
Project: Wall Shelf Page 14 of 17
3. Push the Shelf parts (item 1) into mortises on the Side Mirror (item 7) and fasten them with Wedges
(item 3).
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
15/17
Project: Wall Shelf Page 15 of 17
4. Put some glue into the holes on the Side (item 2). In this holes comes Dowel Pins D6mm (item 6) andRound Bars (item 4). Then attach the Side (item 2) to the subassembly made in the previous step.
5. Tamp the Wedges (item 3) down with the hammer into the holes on the Shelves (item 1).
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
16/17
Project: Wall Shelf Page 16 of 17
6. Fasten the Holder Plates (item 8) to the subassembly made in the previous step with the Wood Screws(item 9).
Project from www.craftsmanspace.com
http://localhost/var/www/apps/conversion/tmp/scratch_1/WWW.CRAFTSMANSPACE.COM
-
8/9/2019 zidna polica
17/17
Project: Wall Shelf Page 17 of 17
7. All what is left to do, is to drill the holes in the wall on with the following distance between them.The measurement from the bottom picture should be taken just informatively. It would be best tomeasure the real distance on your assembly.
Put the Fisher Plugs 8 – Plastic Anchor (item 11) into the holes and screw the Screws D5x60mm(item 10) in it. But do not screw them entirely, left the head screw to stick out a few millimeters(approx. 5-8mm from the wall) so you could hang the self.