zive electrochemical workstations - 제목 없음 electrochemical workstations ... current range 12...
TRANSCRIPT
ZIVZIVEE Electrochemical WorkstationsElectrochemical Workstations
ZIVE BP2A/BP2CZIVE BP2A/BP2CZIVE BP2A/BP2CZIVE BP2A/BP2C
Designing the Solution for ElectrochemistryPotentiostat/Galvanostat І Battery Cycler І Fuel Cell Test Station+82-2-578-6516 І [email protected] І www.zivelab.com І www.fctest.com
FeaturesZIVE BP2/BP2CZIVE BP2/BP2C
FeaturesZIVE BP2/BP2CZIVE BP2/BP2C
• 1MHz EIS capability potentiostat/galvanostat/impedance analyzerp y p /g / p y• Compact size with full functions• Wide current range(2A to 20pA) for various applications• Supports fourteen(14) kind of EIS techniques• Current interrupt IR measurement/IR compensation• Pulse charge/discharge test available• Bipolar pulse capability• High speed data sampling time• High speed data sampling time
- 50usec/sample in burst mode- 1msec/sample in normal mode- 2usec/sample in fast sweep modeI t l 350 000 d t i t t• Internal 350,000 data point storage
• Bi potentiostat application available (BP2C)• Full software packages as standard
- Energy software package (BAT)Energy software package (BAT)- EIS software package (EIS)- Electrochemical analysis software package(EAS)- Corrosion software package (COR)
• Free software package• Free software package
SpecificationZIVE BP2ZIVE BP2
System
Cell cable 1 meter shielded type(standard)working, reference, counter, working sense,
Control DSP with FPGA
Calibration Automatic
Data acquisitionADCDAC
2x16 bit ADCs(500kHZ) for voltage, current1x16bit ADCs(250kHz) for auxiliary reading2x16bit DAC(50MHz) for bias & scan
Filter selection 4ea (5Hz 1kHz 500kHz 5MHz)Filter selection 4ea (5Hz, 1kHz, 500kHz, 5MHz)
Scan rate 0~5000V/sec@10mV sampling interval
Max channel no 32 channels via USB connectionMax. channel no. 32 channels via USB connection
Internal data memory 350,000 points
SpecificationZIVE BP2ZIVE BP2
Power Amplifier(CE)
Power 24Watt (12V@2A)
Compliance voltage ±12VCompliance voltage ±12V
Max. current ±2A
Control speed selection 8eap
Bandwidth 5MHz
Slew rate 10V/usec
SpecificationZIVE BP2ZIVE BP2
Potentiostat Mode (Voltage Control)
Voltage Control
Control voltage range ±10V, ±1V, ±100mV
Voltage resolution 16 bit per each range
Voltage accuracy ±1mV, ±0.05% of setting(gain x1)
Max scan range ±10V vs ref EMax. scan range ±10V vs. ref. E
Current Measurement
Current range 12 ranges (auto/manual setting)20pA~2A20pA & 200pA with gain
Current resolution 16 bit60uA, 6uA, 600nA, 60nA, 6nA, 600pA,60uA, 6uA, 600nA, 60nA, 6nA, 600pA, 60pA, 6pA,600fA,60fA(6fA, 0.6fA with gain)
Current accuracy ±0.1% f.s. ±10pA (gain x1)>200nA f.s.
SpecificationZIVE BP2ZIVE BP2
Galvanostat Mode (Current Control)
Current Control
Control current range max. ±2A± full scale depending on selected range± full scale depending on selected range
Current resolution 16 bit60uA, 6uA, 600nA, 60nA, 6nA, 600pA, 60pA, 6pA,600fA,60fA(6fA 0 6fA ith i )(6fA, 0.6fA with gain)
Current accuracy ±0.1% f.s. ±10pA (gain x1)>200nA f.s.
Voltage Measurement
Voltage range 10V, 1V, 100mV
Voltage resolution 16 bit0.3mV, 30uV, 3uV0.3mV, 30uV, 3uV
Voltage accuracy ±1mV ±0.05% of reading(gain x1)
SpecificationZIVE BP2ZIVE BP2
EIS(Internal FRA) for System
Frequency range 10uHz ~ 1MHz
Frequency accuracy 0.01%
Frequency resolution 5000/decade
Amplitude 0.1mV ~ 5V rms (potentiostatic)0.1 ~ 70% f.s. (Galvanostatic)
Mode Static EIS:Potentiostatic GalvanostaticPotentiostatic, Galvanostatic,Pseudogalvanostatic, OCP
Dynamic EIS:Potentiodynamic, Galvanodynamic
Fixed Frequency Impedance:Fixed Frequency Impedance:Potentiostatic, Galvanostatic,Potentiodynamic, Galvanodynamic
Multisine EIS:Potentiostatic GalvanostaticPotentiostatic, Galvanostatic
Intermittent PEIS/GEIS
SpecificationZIVE BP2ZIVE BP2
Electrometer
M i t lt ±10VMax. input voltage ±10V
Input impedance 2x1013 Ω ιι 4.5pF
Bandwidth >22MHz
CMRR >114dB
Interface for System
Auxiliary port
Auxiliary voltage input(3channel) 3 analog input: ±10V
Auxiliary voltage output 1 analog output : ±10V
Zero resistance ammeter 2nA ~ 2A
DI/DO port DO: 3 DI: 2
External booster interface Via booster I/F cable
Peripheral communication I2C
Signal Generator output 1 analog output for FRA
Temperature input K type thermocoupleTemperature input K type thermocouple (default: max. 250°C)
SpecificationZIVE BP2ZIVE BP2
SoftwareSoftware
Max. step per experiment 1000
Shutdown safety limits voltage, current, temperature, AuxV, etc.
Max. sampling rate 20kHz(50usec) in burst mode500kHz(2usec) in fast sweep mode
Max. sampling time unlimitedp g
Sampling condition Time, dv/dt, dI/dt, temperature, etc.
Main Systemy
PC communication USB 2.0 high speed
Line voltage 100~240VAC, 50/60Hz, 1Amp
Size / Weight (8channel) 209x270x378mm(WxDxH) / 9.25kg
Max. output power 24Watt
SpecificationZIVE BP2ZIVE BP2
PC RequirementPC Requirement
Operating system Windows XP SP3/7/8/10(32bit/64bit OS)
PC ifi ti P ti 4 RAM 1GB hi hPC specification Pentium4, RAM 1GB or higher
Display 1600x900 high color or higher
USB High speed 2.0g p
General
Dummy cell One external dummy cell included
Impedance data analysis software ZMANTM software
DC data analysis software IVMANTM software
AppearanceFront ViewFront View
Internal FRA includedFPGA/DSP l
Aux port includes3 analog input (auxiliary voltage measurement)1 analog output
FPGA/DSP controlPlug-In type
1 analog output2 digital input3 digital output
Misc port includes ;I2C com port for external device control
Temperature measurement (K type) Thermocouple (Option) control
FRA port1 Sig generator output1 Voltage input1 Current inputCell port
Working, Counter,ZRA ,Working sense,
(Option)
gReference
AppearanceLCD Display – DC ModeLCD Display DC Mode
AppearanceLCD Display – EIS ModeLCD Display EIS Mode
AppearanceRear ViewRear View
Air flowing fan
Power switch
USB portp
Power connector
System Configuration
• System setup with multiple ZIVE BP2s• Connecting by USB hubg y
• System setup with one or more ZIVE product family• Connecting by USB hub
When communication fails…
• When communication error occurs between ZIVE BP2 and PC the data will• When communication error occurs between ZIVE BP2 and PC, the data will be stored on the device memory.
• The data will be transferred to the PC after PC is restored.
Strong Point (Hardware)
• Wide current rangeg: Max. 2 Amp: Suitable for various application
• 3 measurement/control voltage range &12 measurement/control current range12 measurement/control current range
• Independent operation by DSP with FPGA
• Built-in FRA• Built-in FRA : Impedance measurements available: No other device is needed.
• Compact size and light weightp g g: Small footprint
• Big instrument internal memory capacity: 350,000 data point can be stored.
• Three auxiliary voltage measurement available
• Temperature measurement available• Auxiliary voltage output• Auxiliary voltage output• DI/DO ports
FRA Function
FRA function is to control external electronic load or potentiostat for EIS measurement
•FRA potentiostatic EIS•FRA galvanostatic EIS•FRA potentiostatic HFR•FRA galvanostatic HFR
Multi Working Electrodes(BP2C)g ( )
The BP2C is designed for the test with multi working electrodes The BP2C is designed for the test with multi working electrodes sharing one reference electrode and one counter electrode.
BP2A BP2C
Applicable FieldMarket For the ProductMarket For the Product
Other Application- Coating evaluation- Heavy metal detection- Semiconductor- EDLC- Membrane- Bioelectrochemistry- Material testing etc.g
Ordering Guide
Zi BP2Zive BP2- Comes with following items as standard
a) Cell cable with alligator clips, 2eab) Dummy cell, 1ea) d) P d 1
Standard Systemc) d) Power cord, 1ead) USB cable, 1eae) Install CD, 1ea
Software Package- EIS software package (EIS)- Energy software package (BAT)- Corrosion software package (COR)- Electrochemical analysis software package (EAS)-- FRA function for external load’s and external potentiostat’s EIS
K type thermocouple Optional ItemsK type thermocoupleAux cable, ZRA cable, & FRA cableOptional Booster I/F Cable, 1.5m
Optional Items
Thank o !Thank you !