รายชื่อเอกสารใหม่ 2560) acceptance (approval)...
TRANSCRIPT
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 1
รายชอเอกสารใหม (เมษายน-มถนายน 2560)
ACCEPTANCE (APPROVAL) IEC
IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ACCEPTANCE INSPECTION IEC
IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ADHESIVES ISO ISO/TS 11405 2015 Dentistry - Testing of adhesion to tooth structure /By
International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.
AIRCRAFT COMPONENTS IEC IEC TS 62686-1 2015 Process management for avionics - Electronic components
for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ALTERNATING CURRENT IEC IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital
communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 2
ALUMINIUM ISO
ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg, P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
AMPLIFIERS IEC
IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
ANALOGUE SIGNALS IEC
IEC 62014-5 2015 Quality of electronic and software intellectual property used in system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
APPROVAL ORGANIZATIONS ISO
ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.
ARC-WELDING EQUIPMENT IEC
IEC 60974-10 2014 Are welding equipment - P.10: Electromagnetic compatibility (EMC) requirements /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2014.
ARTIFICIAL WEATHERING TESTS IEC
IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 3
ASSESSED QUALITY IEC IEC PAS 61076-3-122 2015 Connectors for electronic equipment - Product
requirements - P.3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing
audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.
ATOMIC ABSORPTION SPECTROPHOTOMETRY IEC
IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
AUDIO EQUIPMENT IEC IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia
systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
AUTOMATIC CONTROL SYSTEMS IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and
communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
AXIAL STRESS IEC IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices -
P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 4
BATTERY CHARGERS IEC
IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
BATTERY-POWERED DEVICES IEC
IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
BETA-PARTICLES ISO
ISO 9697 2015 Water quality - Gross beta activity in non-saline water - Test method using thick source /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.
BIOFUELS ISO
ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg, P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 16968 2015 Solid biofuels - Determination of minor elements /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride, sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
BIOMASS ISO
ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg, P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 5
ISO 16968 2015 Solid biofuels - Determination of minor elements /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride, sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
BUS NETWORKS
IEC
IEC PAS 62948 2015 Industrial networks - Wireless communication network and communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
BUSHES (MECHANICAL COMPONENTS) IEC
IEC 60940 2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
CALCIUM ISO
ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg, P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
CALIBRATION IEC
IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
CAPACITORS IEC
IEC 60940 2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 6
CAPS (CLOSURES) IEC IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps
(excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
CATERING EQUIPMENT IEC IEC TS 62835 2015 Electric toasters for household and similar use - Methods and
measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
CERAMICS ISO ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for
Standardization (ISO). 4th ed. Geneva: ISO, 2015. CERTIFICATION (APPROVAL) ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing
audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.
CERTIFICATION BODIES ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing
audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.
CHEMICAL ANALYSIS AND TESTING ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,
P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16968 2015 Solid biofuels - Determination of minor elements /By
International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and
chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,
sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray
fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 7
ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2015.
CHEMICAL COMPOSITION ISO ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray
fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
CHEMICAL-RESISTANCE TESTS IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for
measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
CHLORIDES ISO ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,
sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
CHLORINE ISO ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and
chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
CLEARANCE DISTANCES IEC IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2:
d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015. COAXIAL CONNECTORS IEC IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for
radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω; (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 8
COMBUSTION TEST METHODS ISO ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and
chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
COMMERCE ISO ISO 14533-1 2014 Processes, data elements and documents in commerce, industry
and administration - Long term signature profiles - P.1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2014.
COMMUNICATION CABLES
IEC
IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61196-1-100 2015 Coaxial communication cables - P.1-100: Electrical methods - General requirements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
COMMUNICATION EQUIPMENT
IEC
IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
COMMUNICATION NETWORKS IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and
communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
COMMUNICATION PROCEDURES IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and
communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 9
COMPUTER HARDWARE IEC IEC 62014-5 2015 Quality of electronic and software intellectual property used in
system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
COMPUTER NETWORKS IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and
communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
COMPUTER PERIPHERAL EQUIPMENT IEC IEC 62014-5 2015 Quality of electronic and software intellectual property used in
system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
COMPUTER SOFTWARE
IEC
IEC 62014-5 2015 Quality of electronic and software intellectual property used in system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
COOKING APPLIANCES
IEC
IEC TS 62835 2015 Electric toasters for household and similar use - Methods and measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
COPPER
IEC
IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 10
CUTTING TOOLS IEC
IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
DATA ELEMENTS ISO
ISO 14533-1 2014 Processes, data elements and documents in commerce, industry and administration - Long term signature profiles - P.1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2014.
DATA PROCESSING IEC
IEC PAS 62948 2015 Industrial networks - Wireless communication network and communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
DATA TRANSMISSION IEC
IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC PAS 62948 2015 Industrial networks - Wireless communication network and communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
DENTAL MATERIALS ISO
ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2015.
ISO/TS 11405 2015 Dentistry - Testing of adhesion to tooth structure /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 11
DENTAL PROSTHESIS ISO
ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2015.
ISO/TS 11405 2015 Dentistry - Testing of adhesion to tooth structure /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.
DENTISTRY ISO
ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2015.
ISO/TS 11405 2015 Dentistry - Testing of adhesion to tooth structure /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.
DETECTORS (CIRCUITS) IEC
IEC 61243-3 2014 Live working - Voltage detectors - P.3: Two-pole low-voltage type /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2014.
DIAMOND TOOLS IEC
IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
DIELECTRIC DEVICES IEC
IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
DIGITAL SIGNALS IEC
IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 12
DIGITAL SIGNATURES ISO
ISO 14533-1 2014 Processes, data elements and documents in commerce, industry and administration - Long term signature profiles - P.1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2014.
DIRECT CURRENT IEC
IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
DISCHARGE LAMPS IEC
IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
DISPLAY DEVICES IEC
IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection - Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
DISPLAY DEVICES (COMPUTERS) IEC
IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 13
DRILLING MACHINES IEC
IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
DRY-TYPE TRANSFORMERS IEC
IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ECONOMIC DEVELOPMENT ISO
ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ELECTRIC CABLES IEC IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic
optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61196-1-100 2015 Coaxial communication cables - P.1-100: Electrical methods General requirements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ELECTRIC CHARGE IEC
IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 14
ELECTRIC CONDUCTORS IEC
IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRIC CONNECTORS IEC
IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC PAS 61076-3-122 2015 Connectors for electronic equipment - Product requirements - P.3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRIC CONVERTORS IEC IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International
Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ELECTRIC ENCLOSURES IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control
and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 15
ELECTRIC INSULATORS
IEC
IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ELECTRIC MOTORS
IEC
IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
ELECTRIC POWER SYSTEMS
IEC
IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2: d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRIC POWER TRANSMISSION
IEC
IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2: d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRIC SUBSTATIONS
IEC
IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2: d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRIC TERMINALS
IEC
IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 16
ELECTRIC WIRES IEC
IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ELECTRICAL COMPONENTS IEC
IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 60940 2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61010-2-051 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC PAS 61076-3-122 2015 Connectors for electronic equipment - Product requirements - P.3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 17
IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ELECTRICAL CONDUCTANCE IEC
IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
ELECTRICAL CONNECTIONS
IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control
and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRICAL ENGINEERING
IEC
IEC 60079-5 2015 Explosive atmospheres - P.5: Equipment protection by powder filling "q" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.
IEC 60079-6 2015 Explosive atmospheres - P.6: Equipment protection by liquid immersion "o" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.
IEC 60364-7-722 2015 Low-voltage electrical installations - P.7-722: Requirements for special installations or locations - Supplies for electric vehicles /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRICAL EQUIPMENT IEC IEC 60079-32-2 2015 Explosive atmospheres - P.32-2: Electrostatics hazards - Tests
/By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 18
IEC 60364-7-722 2015 Low-voltage electrical installations - P.7-722: Requirements for special installations or locations - Supplies for electric vehicles /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61010-2-051 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC TS 60079-40 2015 Explosive atmospheres - P.40: Requirements for process sealing between flammable process fluids and electrical systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRICAL HOUSEHOLD APPLIANCES IEC IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia
systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 62835 2015 Electric toasters for household and similar use - Methods and measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRICAL INSTALLATIONS IEC
IEC 60364-7-722 2015 Low-voltage electrical installations - P.7-722: Requirements for special installations or locations - Supplies for electric vehicles /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 19
ELECTRICAL INSULATION IEC IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2:
d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRICAL INSULATION DEVICES IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass
insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ELECTRICAL MEASURING INSTRUMENTS IEC
IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
ELECTRICAL SAFETY IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for
measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 20
ELECTRICAL TESTING IEC
IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC PAS 61076-3-122 2015 Connectors for electronic equipment - Product requirements - P.3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ELECTRICALLY-OPERATED DEVICES
IEC
IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
IEC TS 62835 2015 Electric toasters for household and similar use - Methods and measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTROMAGNETIC COMPATIBILITY (EMC)
IEC
IEC 60974-10 2014 Are welding equipment - P.10: Electromagnetic compatibility (EMC) requirements /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2014.
IEC 61000-4-30 2015 Electromagnetic compatibility (EMC) - P.4-30: Testing and measurement techniques - Power quality measurement methods /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 21
ELECTROMECHANICAL DEVICES IEC
IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices - P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRONIC EQUIPMENT AND COMPONENTS IEC
IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 60940 2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61010-2-051 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC PAS 61076-3-122 2015 Connectors for electronic equipment - Product requirements - P.3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω; (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 22
IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 62014-5 2015 Quality of electronic and software intellectual property used in system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices - P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ELECTRONIC SIGNATURES ISO ISO 14533-1 2014 Processes, data elements and documents in commerce,
industry and administration - Long term signature profiles - P.1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2014.
ENAMELLED WIRES IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided
resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 23
ENDURANCE TESTING IEC IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL
dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ENVIRONMENTAL MANAGEMENT ISO
ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.
ENVIRONMENTAL TESTING IEC
IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
EQUIPMENT SAFETY IEC
IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
EXPLOSIVE ATMOSPHERES IEC IEC 60079-5 2015 Explosive atmospheres - P.5: Equipment protection by powder
filling "q" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 24
IEC 60079-6 2015 Explosive atmospheres - P.6: Equipment protection by liquid immersion "o" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.
IEC 60079-32-2 2015 Explosive atmospheres - P.32-2: Electrostatics hazards - Tests /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 60079-40 2015 Explosive atmospheres - P.40: Requirements for process sealing between flammable process fluids and electrical systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
EXTRACTION METHODS OF ANALYSIS ISO ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,
sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
FIBRE OPTIC CABLES IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test
procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
FIBRE OPTIC CONNECTORS IEC IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components
- Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 25
FIBRE OPTICS IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test
procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC
IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
FIELD TESTING ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by
near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
FIELDBUS IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and
communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
FREQUENCY CONTROL IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control
and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 26
FUELS ISO
ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg, P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 16968 2015 Solid biofuels - Determination of minor elements /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride, sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
GAIN CONTROL IEC IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain
parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
GLASS FIBRES IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided
resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
GRADES (QUALITY)
IEC
IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
GROUND WATER
ISO
ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 27
HALIDE LAMPS
IEC
IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
HIGH VOLTAGE
IEC
IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
HIGH-VOLTAGE INSTALLATIONS
IEC
IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2: d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
HIGH-VOLTAGE TESTS
IEC
IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
HOUSEHOLD EQUIPMENT
IEC
IEC TS 62835 2015 Electric toasters for household and similar use - Methods and measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
INDUSTRIAL ELECTRICAL INSTALLATIONS
IEC
IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 28
INSULATED WIRES
IEC
IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
INTEGRATED CIRCUITS
IEC
IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
INTENSITY
IEC
IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
INTERFACES
IEC
IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
INTERFACES (DATA PROCESSING)
IEC
IEC 62014-5 2015 Quality of electronic and software intellectual property used in system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC PAS 62948 2015 Industrial networks - Wireless communication network and communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 29
IONIZATION IEC IEC 61010-2-061 2015 Safety requirements for electrical equipment for
measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IRON ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,
P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. LABORATORY EQUIPMENT IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for
measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
LASERS IEC IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain
parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
LIGHTING EQUIPMENT IEC IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps
(excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
LIQUID CRYSTAL DEVICES IEC IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection -
Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 30
LIQUID CRYSTAL DISPLAYS IEC IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection -
Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
LOW VOLTAGE IEC IEC 60364-7-722 2015 Low-voltage electrical installations - P.7-722: Requirements
for special installations or locations - Supplies for electric vehicles /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
MACHINE TOOLS IEC
IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
MAGNESIUM ISO
ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg, P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
MECHANICAL MEASUREMENT IEC
IEC 61010-2-051 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
MECHANICAL TESTING IEC IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic
optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 31
IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
METALS IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control
and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
MULTIMEDIA SYSTEMS
IEC
IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
NATURAL RUBBER
ISO
ISO 1656 2014 Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014.
NETWORK LAYER (OSI)
IEC
IEC PAS 62948 2015 Industrial networks - Wireless communication network and communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
NUCLEAR-ELECTRIC POWER STATIONS
IEC
IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
NUCLEAR POWER
IEC
IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 32
NUCLEAR REACTORS IEC
IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
OIL-IMMERSED TRANSFORMERS IEC
IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
OPEN SYSTEMS INTERCONNECTION IEC
IEC PAS 62948 2015 Industrial networks - Wireless communication network and communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
OPTICAL AMPLIFIERS IEC
IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
OPTICAL COMMUNICATION SYSTEMS IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test
procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
OPTICAL FIBRES IEC
IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 33
IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
OPTICAL MEASUREMENT IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test
procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
OPTOELECTRONIC DEVICES IEC
IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection - Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 34
IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
PANELS IEC IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL
dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
PERFORMANCE TESTING IEC
IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 62835 2015 Electric toasters for household and similar use - Methods and measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
PHOSPHORUS ISO
ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg, P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
PHYSICAL PROPERTIES OF MATERIALS ISO
ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2015.
PIEZOELECTRIC DEVICES IEC
IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 35
PIEZOELECTRIC MATERIALS IEC
IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
PIPES BSI
PD CEN/TS 12201-7 2014 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2014.
PIPEWORK SYSTEMS BSI PD CEN/TS 12201-7 2014 Plastics piping systems for water supply, and for
drainage and sewerage under pressure - Polyethylene (PE) /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2014.
PLASMA DISPLAY DEVICES IEC IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL
dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
PLASMA DISPLAYS IEC IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL
dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
PLASTICS AND RUBBER TECHNOLOGY ISO ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect
of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 36
POLLUTION IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass
insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
POLYETHYLENE BSI PD CEN/TS 12201-7 2014 Plastics piping systems for water supply, and for
drainage and sewerage under pressure - Polyethylene (PE) /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2014.
PORTABLE MACHINE TOOLS IEC IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
POTASSIUM ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,
P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,
sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015. POTENTIOMETERS (RESISTORS) IEC IEC 60940 2015 Guidance information on the application of capacitors, resistors,
inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
POWER TRANSFORMERS IEC IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International
Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015. PROBES IEC IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important
to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 37
PROCESS CONTROL IEC
IEC 61285 2015 Industrial-process control - Safety of analyser houses /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC PAS 62948 2015 Industrial networks - Wireless communication network and communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
PROTECTED ELECTRICAL EQUIPMENT IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for
measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
QUALIFICATION APPROVAL IEC IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components
- Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
QUALITY ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements
for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 38
QUALITY ASSURANCE SYSTEMS IEC IEC TS 62686-1 2015 Process management for avionics - Electronic components
for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing
audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.
QUALITY AUDITING ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing
audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.
QUALITY MANAGEMENT ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing
audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.
RADIATION MEASUREMENT ISO ISO 9697 2015 Water quality - Gross beta activity in non-saline water - Test
method using thick source /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.
RADIOCOMMUNICATION IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and
communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
RADIOFREQUENCIES IEC IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for
radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 39
IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω; (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
RATED VOLTAGE IEC
IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
RECORDS (DOCUMENTS) ISO
ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.
RESILIENCE ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements
for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
RESISTANCE MEASUREMENT IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for
measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
RESISTORS IEC IEC 60940 2015 Guidance information on the application of capacitors, resistors,
inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 40
ROAD VEHICLES IEC IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital
communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
RUBBER ISO ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect
of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015. SAFETY
IEC
IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
SAFETY DEVICES
IEC
IEC 61010-2-051 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
SAFETY MEASURES IEC
IEC 61010-2-051 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 41
SAMPLING METHODS IEC
IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
SEMICONDUCTOR DEVICES IEC IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International
Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015. IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL
dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices - P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
SEMICONDUCTOR TECHNOLOGY
IEC
IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices - P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
SEMICONDUCTORS IEC
IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 42
SIGNAL PROCESSING
IEC IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain
parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
SIGNAL STRENGTH
IEC IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain
parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
SILICON
ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,
P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
SODIUM ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,
P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,
sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
SODIUM-VAPOUR LAMPS IEC IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps
(excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
SOIL CLASSIFICATION TESTS ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by
near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 43
SOIL SAMPLING ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by
near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
SOIL SURVEYS ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by
near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
SOIL TESTING ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by
near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
SOILS ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by
near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
SOILS - QUALITY ISO
ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
SOLID FUELS ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,
P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16968 2015 Solid biofuels - Determination of minor elements /By
International Organization for Standardization (ISO). Geneva: ISO, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 44
ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride, sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
SPECIAL CERAMICS ISO
ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2015.
SPECIFICATION (APPROVAL) IEC
IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω; (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 62014-5 2015 Quality of electronic and software intellectual property used in system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC PAS 61076-3-122 2015 Connectors for electronic equipment - Product requirements - P.3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
SPECTROPHOTOMETRY ISO
ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 45
SPECTROSCOPY IEC IEC 61010-2-061 2015 Safety requirements for electrical equipment for
measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
STABILITY IEC IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
STIRRERS (LABORATORY) IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for
measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
SULFUR ISO ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and
chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
SURFACE MOUNTING IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control
and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
SURFACE MOUNTING DEVICES IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control
and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 46
SUSTAINABILITY ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements
for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
SUSTAINABLE DEVELOPMENT ISO
ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
SWITCHGEAR IEC
IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2: d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
SWITCHING SUBSTATIONS IEC
IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2: d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
SYNTAX IEC
IEC 62014-5 2015 Quality of electronic and software intellectual property used in system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
SYNTHETIC RUBBER ISO ISO 1656 2014 Rubber, raw natural, and rubber latex, natural - Determination of
nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014.
TELEVISION IEC
IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 47
TEMPERATURE IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided
resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
TEMPERATURE MEASUREMENT IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test
procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
TENSILE TESTING IEC IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices -
P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
TEST EQUIPMENT IEC IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic
optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices - P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 62835 2015 Electric toasters for household and similar use - Methods and measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
TEST METHODS IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test
procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 48
ISO
ISO/TS 11405 2015 Dentistry - Testing of adhesion to tooth structure /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.
TEST SPECIMENS IEC
IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices - P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
ISO
ISO 1656 2014 Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014.
ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg, P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 16968 2015 Solid biofuels - Determination of minor elements /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
TESTING
IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass
insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
TESTING CONDITIONS IEC IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for
radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 49
IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC TS 62835 2015 Electric toasters for household and similar use - Methods and measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
THERMAL ANALYSIS IEC IEC 61010-2-061 2015 Safety requirements for electrical equipment for
measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
THERMAL RESISTANCE IEC
IEC 61010-2-051 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.
THERMAL-SHOCK RESISTANCE IEC
IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
THERMOPLASTIC POLYMERS ISO ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect
of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 50
THIN FILMS IEC IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices -
P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
TITANIUM ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,
P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
TOASTERS IEC IEC TS 62835 2015 Electric toasters for household and similar use - Methods and
measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
TOWN ORGANIZATIONS ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements
for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
TRACE ELEMENT ANALYSIS ISO ISO 16968 2015 Solid biofuels - Determination of minor elements /By
International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray
fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
TRANSFORMERS IEC
IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2015.
TRANSMITTERS IEC
IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 51
TRANSPORTABLE IEC
IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
TYPE TESTING IEC
IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
URBAN AREAS ISO
ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
VARIABLE CAPACITORS IEC
IEC 60940 2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
VARIABLE RESISTORS
IEC
IEC 60940 2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
VARNISHED PRODUCTS
IEC
IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 52
VERIFICATION
ISO
ISO 14533-1 2014 Processes, data elements and documents in commerce, industry and administration - Long term signature profiles - P.1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2014.
IEC IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia
systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
VIDEO TAPE RECORDERS IEC
IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
VISUAL INSPECTION (TESTING) IEC IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components
- Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection - Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.
VOLTAGE IEC
IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
VULCANIZED MATERIALS ISO
ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 53
VULCANIZED RUBBER ISO ISO 1656 2014 Rubber, raw natural, and rubber latex, natural - Determination of
nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014. ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect
of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015.
WASTES ISO
ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride, sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.
ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
WATER ISO
ISO 9697 2015 Water quality - Gross beta activity in non-saline water - Test method using thick source /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.
WATER - QUALITY ISO
ISO 9697 2015 Water quality - Gross beta activity in non-saline water - Test method using thick source /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.
WATER SUPPLY BSI
PD CEN/TS 12201-7 2014 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2014.
IEC
IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 54
WATER TESTING ISO
ISO 9697 2015 Water quality - Gross beta activity in non-saline water - Test method using thick source /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.
WINDINGS IEC
IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
WIRES IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided
resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.
X-RAY FLUORESCENCE SPECTROMETRY ISO
ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 55
มาตรฐานไทย
จกรยานยนต - ชนสวน มอก. 97 2557 ผาเบรกส าหรบยานยนต
ดวงโคมไฟฟา มอก. 902-2557 ดวงโคมไฟฟา
เลม 1 - 2557 คณลกษณะทตองการทวไปและการทดสอบ
เลม 2(1) - 2557 ดวงโคมไฟฟาตดประจ าทส าหรบจดประสงคทวไป
เลม 2(2) - 2557 ดวงโคมไฟฟาฝง
เลม 2(3) - 2557 ดวงโคมไฟฟาส าหรบใหแสงสวางบนถนน
เลม 2(4) - 2557 ดวงโคมไฟฟาเคลอนยายไดส าหรบจดประสงคทวไป
เลม 2(5) - 2557 ดวงโคมไฟฟาสาดแสง
เลม 2(6) - 2557 ดวงโคมไฟฟามอถอ
เลม 2(7) - 2557 ดวงโคมไฟฟาใชในทเลยงสตวน าและพชน า
เลม 2(8) - 2557 ดวงโคมไฟฟาใหแสงกลางคนตดตงกบเตารบไฟฟาประธาน
เลม 2(9) - 2557 ดวงโคมไฟฟาฝงพน
เลม 2(10) - 2557 ดวงโคมไฟฟาส าหรบสระวายน าและการใชงานทคลายกน
เลม2(12) - 2557 ดวงโคมไฟฟาจ ากดอณหภมพนผว
ผาเบรก มอก. 97 2557 ผาเบรกส าหรบยานยนต
ฟาผา - การปองกน มอก. 1586 ล.4 - 2557 การปองกนฟาผา เลม 4 ระบบไฟฟาและอเลกทรอนกสภายในสงปลกสราง
รถยนต - ชนสวน มอก. 97 - 2557 ผาเบรกส าหรบยานยนต
ระบบปองกนฟาผา มอก. 1586 ล.4 - 2557 การปองกนฟาผา เลม 4 ระบบไฟฟาและอเลกทรอนกสภายในสงปลกสราง
วสดและอปกรณไฟฟา มอก. 902-2557 ดวงโคมไฟฟา
เลม 1- 2557 คณลกษณะทตองการทวไปและการทดสอบ
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 56
เลม 2(1) - 2557 ดวงโคมไฟฟาตดประจ าทส าหรบจดประสงคทวไป
เลม 2(2) - 2557 ดวงโคมไฟฟาฝง
เลม 2(3) - 2557 ดวงโคมไฟฟาส าหรบใหแสงสวางบนถนน
เลม 2(4) - 2557 ดวงโคมไฟฟาเคลอนยายไดส าหรบจดประสงคทวไป
เลม 2(5) - 2557 ดวงโคมไฟฟาสาดแสง
เลม 2(6) - 2557 ดวงโคมไฟฟามอถอ
เลม 2(7) - 2557 ดวงโคมไฟฟาใชในทเลยงสตวน าและพชน า
เลม 2(8) - 2557 ดวงโคมไฟฟาใหแสงกลางคนตดตงกบเตารบไฟฟาประธาน
เลม 2(9) - 2557 ดวงโคมไฟฟาฝงพน
เลม 2(10) - 2557 ดวงโคมไฟฟาส าหรบสระวายน าและการใชงานทคลายกน
เลม2(12) - 2557 ดวงโคมไฟฟาจ ากดอณหภมพนผว
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 57
Alphabetical Subject Index
Subject Page
Acceptance (approval) 1
Acceptance inspection 1
Adhesives 1
Aircraft components 1
Alternating current 1
Aluminium 2
Amplifiers 2
Analogue signals 2
Approval organizations 2
Arc-welding equipment 2
Artificial weathering tests 2
Assessed quality 3
Atomic absorption spectrophotometry 3
Audio equipment 3
Automatic control systems 3
Axial stress 3
Battery chargers 4
Battery-powered devices 4
Beta-Particles 4
Biofuels 4
Biomass 4
Bus networks 5
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 58
Subject Page
Bushes (mechanical components) 5
Calcium 5
Calibration 5
Capacitors 5
Caps (closures) 6
Catering equipment 6
Ceramics 6
Certification (approval) 6
Certification bodies 6
Chemical analysis and testing 6
Chemical composition 7
Chemical-resistance tests 7
Chlorides 7
Chlorine 7
Clearance distances 7
Coaxial connectors 7
Combustion test methods 8
Commerce 8
Communication cables 8
Communication equipment 8
Communication networks 8
Communication procedures 8
Computer hardware 9
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 59
Subject Page
Computer networks 9
Computer peripheral equipment 9
Computer software 9
Cooking appliances 9
Copper 9
Cutting tools 10
Data elements 10
Data processing 10
Data transmission 10
Dental materials 10
Dental prosthesis 11
Dentistry 11
Detectors (circuits) 11
Diamond tools 11
Dielectric devices 11
Digital signals 11
Direct current 12
Discharge lamps 12
Display devices 12
Display devices (computers) 12
Drilling machines 13
Dry-type transformers 13
Economic development 13
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 60
Subject Page
Electric cables 13
Electric charge 13
Electric conductors 14
Electric connectors 14
Electric convertors 14
Electric enclosures 14
Electric insulators 15
Electric motors 15
Electric power systems 15
Electric power transmission 15
Electric substations 15
Electric terminals 15
Electric wires 16
Electrical components 16
Electrical conductance 17
Electrical connections 17
Electrical engineering 17
Electrical equipment 17
Electrical household appliances 18
Electrical installations 18
Electrical insulation 19
Electrical insulation devices 19
Electrical measuring instruments 19
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 61
Subject Page
Electrical safety 19
Electrical testing 20
Electrically-operated devices 20
Electromagnetic compatibility (EMC) 20
Electromechanical devices 21
Electronic equipment and components 21
Electronic signatures 22
Enamelled wires 22
Endurance testing 23
Environmental management 23
Environmental testing 23
Equipment safety 23
Explosive atmospheres 23
Extraction methods of analysis 24
Fibre optic cables 24
Fibre optic connectors 24
Fibre optics 25
Field testing 25
Fieldbus 25
Frequency control 25
Fuels 26
Gain control 26
Glass fibres 26
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 62
Subject Page
Grades (quality) 26
Ground water 26
Halide lamps 27
High voltage 27
High-voltage installations 27
High-voltage tests 27
Household equipment 27
Industrial electrical installations 27
Insulated wires 28
Integrated circuits 28
Intensity 28
Interfaces 28
Interfaces (data processing) 28
Ionization 29
Iron 29
Laboratory equipment 29
Lasers 29
Lighting equipment 29
Liquid crystal devices 29
Liquid crystal displays 30
Low voltage 30
Machine tools 30
Magnesium 30
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 63
Subject Page
Mechanical measurement 30
Mechanical testing 30
Metals 31
Multimedia systems 31
Natural rubber 31
Network layer (OSI) 31
Nuclear-electric power stations 31
Nuclear power 31
Nuclear reactors 32
Oil-immersed transformers 32
Open systems interconnection 32
Optical amplifiers 32
Optical communication systems 32
Optical fibres 32
Optical measurement 33
Optoelectronic devices 33
Panels 34
Performance testing 34
Phosphorus 34
Physical properties of materials 34
Piezoelectric devices 34
Piezoelectric materials 35
Pipes 35
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 64
Subject Page
Pipework systems 35
Plasma display devices 35
Plasma displays 35
Plastics and rubber technology 35
Pollution 36
Polyethylene 36
Portable machine tools 36
Potassium 36
Potentiometers (resistors) 36
Power transformers 36
Probes 36
Process control 37
Protected electrical equipment 37
Qualification approval 37
Quality 37
Quality assurance systems 38
Quality auditing 38
Quality management 38
Radiation measurement 38
Radiocommunication 38
Radiofrequencies 38
Rates voltage 39
Records (documents) 39
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 65
Subject Page
Resilience 39
Resistance measurement 39
Resistors 39
Road vehicles 40
Rubber 40
Safety 40
Safety devices 40
Safety measures 40
Sampling methods 41
Semiconductor devices 41
Semiconductor technology 41
Semiconductors 41
Signal processing 42
Signal strength 42
Silicon 42
Sodium 42
Sodium-vapour lamps 42
Soil classification tests 42
Soil sampling 43
Soil surveys 43
Soil testing 43
Soils 43
Soils - Quality 43
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 66
Subject Page
Solid fuels 43
Special ceramics 44
Specification (approval) 44
Spectrophotometry 44
Spectroscopy 45
Stability 45
Stirrers (laboratory) 45
Sulfur 45
Surface mounting 45
Surface mounting devices 45
Sustainability 46
Sustainable development 46
Switchgear 46
Switching substations 46
Syntax 46
Synthetic rubber 46
Television 46
Temperature 47
Temperature measurement 47
Tensile testing 47
Test equipment 47
Test methods 47
Test specimens 48
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 67
Subject Page
Testing 48
Testing conditions 48
Thermal analysis 49
Thermal resistance 49
Thermal-shock resistance 49
Thermoplastic polymers 49
Thin films 50
Titanium 50
Toasters 50
Town organizations 50
Trace element analysis 50
Transformers 50
Transmitters 50
Transportable 51
Type testing 51
Urban areas 51
Variable capacitors 51
Variable resistors 51
Varnished products 51
Verification 52
Video tape recorders 52
Visual inspection (testing) 52
Voltage 52
รายชอเอกสารใหม (เมษายน-มถนายน 2559) หนา 68
Subject Page
Vulcanized materials 52
Vulcanized rubber 53
Wastes 53
Water 53
Water - Quality 53
Water supply 53
Water testing 54
Windings 54
Wires 54
X-ray fluorescence spectrometry 54