adeor velocity
TRANSCRIPT
-
8/13/2019 Adeor Velocity
1/28
Highspeed Power System
-
8/13/2019 Adeor Velocity
2/28
Based on more than 25 years of highspeed motordrill experience and conti-nuous development adeor launches the all new electric Velocity highspeedmotordrill system.
The Velocity system is designed to exceed existing requirements on highspeed motordrill systems. It
is more powerful than most electric drill systems whilst generating significantly less heat without the need
of active cooling.
Nach mehr als 25 Jahren auf dem Markt fr Highspeed Motordrill Systeme und kontinuierlicher Ent-
wicklungsarbeit startet adeor das elektrische VelocityHighspeed Motordrill System. Es bertrifft ak-
tuelle elektrische Highspeed Systeme in Bezug auf Drehmoment und Zuverlssigkeit bei wesentlich
geringerer Wrmeentwicklung.
30% less weight*
20% more torque*
Minimal thermal warming
*compared to previous ZMM generation
HIGHSPEED POWER SYSTEM
-
8/13/2019 Adeor Velocity
3/28
80.000 rpm
Integrated irrigation
Low noise level*
*40 dBA motor noise level acc.to ISO 11498
-
8/13/2019 Adeor Velocity
4/28
Contents
06-07
Control Unit
with integrated irrigation pump
Steuereinheit
mit integrierter Splpumpe
08-10
System Setup
setup possibilities
System Setup
Aufbaumglichkeiten
11
System Advantages
Systemvorteile
adeorist eine eingetragene Marke der adeor Medical AG
Alle Rechte der Verbreitung, Nachdruck (auch auszugsweise) oder Einspeicherung
und Rckgewinnung in Datenverarbeitungsanlagen aller Art sind vorbehalten und
bedrfen unserer schriftlichen Genehmigung.
Copyright 2013 adeor Medical AG
01-0513-D/E
Gedruckt in Deutschland
Mai 2013
adeor is a registered trademark of adeor Medical AG
All rights of distribution, also by photocopy, reprint or storing and reco-
very in any kind of data processing device are reserved and require our
written approval.
Copyright 2013 adeor Medical AG
01-0513-D/E
Printed in Germany
May 2013
Printed on recycled paper.
Gedruckt auf Recyclingpapier.
-
8/13/2019 Adeor Velocity
5/28
12-15
System components
Systemkomponenten
16-25
System Overview
Systembersicht
26-27
Order Data & Technical Data
Bestelldaten & Technische Daten
-
8/13/2019 Adeor Velocity
6/28
Control Unit
with integrated irrigation
Velocity Control Unit
The compact control unit has been designed utilising feedback from
numerous surgeons in various regions of the world. The result is a con-
sole that is easy to operate with only a minimum of buttons. No lengthymenus to navigate, no overload of functionality. This reduces the likeli-
hood of operating errors, time needed for installation and set-up as well
as training requirements.
The control unit meets or exceeds all applicable safety standards. Its
dimensions are a new benchmark for high-speed drill systems. It can be
easily placed close to the user and almost without any hindrance to
other medical apparatus within the OR.
Most functions of the control unit can also be operated by the surgeon
using the foot switch. This is not just time-saving but also reduces the
need to communicate between sterile and non-sterile OR personnel.
The control unit also features an inbuilt irrigation pump with adjustable
flow rate. This feature eliminates the need for an additional irrigation sy-
stem for the drilling process.
Grundlage fr die Entwicklung der neuen Velocity Steuereinheit war
das Feedback zahlreicher Chirurgen im In- und Ausland. Das Ergebnis
ist eine Steuereinheit, die sich intuitiv bedienen lsst. Auf komplizierte
Mens und eine groe Anzahl von Knpfen wurde bewut verzichtet.
Das reduziert die Gefahr von Bedienfehlern ebenso wie den Schu-
lungsaufwand.
Die Steuerkonsole wurde nach den hchsten Sicherheitsstandards ent-
wickelt und ganz bewusst extrem kompakt konzipiert, wodurch sie sich
im Operationssaal ohne jede Behinderung neben der Vielzahl anderer
Gerte leicht unterbringen lsst.
Die meisten Funktionen des Velocity Systems lassen sich auch, direkt
vom Operateur, ber das neue Fupedal ansteuern. Das spart Zeit und
reduziert den Kommunikationsaufwand im OP-Saal.
Neu ist auch die in der Kontroleinheit integrierte Splpumpe mit variabler
Frdermenge. Der Einsatz einer zustzlichen Person zum Bedienen
einer Spleinheit whrend des Arbeitens mit dem Velocity-System ist
somit hinfllig.
HIGHSPEED POWER SYSTEM
Control unit and foot control
-
8/13/2019 Adeor Velocity
7/28
07
FOOT CONTROL
> Large, easy to find foot print
>Wide-angle accessibility
> 3 colour-coded buttons to control rotation, operation mode and irrigation
>Accelerator or On/Off Mode
> Safety guard
> Sicherer Halt auf dem OP-Boden
>Leicht mit dem Fu zu ertasten
> 3 Funktionstasten fr Programmwahl, Rotationsrichtung und Splung
> Gaspedal- oder An/Aus Modus
> Sicherheitsbgel
Motor cable safety socket
Sicherheitsstecker Motorkabel
Illuminated user interface
Beleuchtetes Bedienfeld
Integrated irrigation pump
Integrierte Splpumpe
VMM-EC
Control unit with integrated irrigation pump
Steuereinheit mit integrierter Splpumpe
VMME-FS
Water-proof foot switch
Fuschalter - wasserdicht
-
8/13/2019 Adeor Velocity
8/28
Straight & Angled System Setup
>The Straight System Setup
As highspeed trepanation became more and more popular, straight mo-tordrill systems dominated the market. Until this day, many surgeons
prefer a straight system for various reasons. For some cranial procedu-
res, such as perforation and craniotomies, a straight setup is ideal. With
the all new adeorVelocity System, surgeons have the unique possi-
bility to switch between straight and angled system setup, using ade-
ors unique thumb snap mechanism.
>Der gerade Systemaufbau
Als der Siegeszug der Highspeed Systeme vor fast 30 Jahren begann,
dominierten Systeme mit geraden Handstcken den Markt. Bis heute
prferieren viele Chirurgen gerade Systeme. Fr bestimmte Anwendun-
gen wie das Perforieren oder die Kraniotomie ist der gerade System-
aufbau die beste Lsung. Mit dem neuen adeor Velocity System mit
einzigartigem Thumb-Snap-Mechanismus, haben Chirurgen die Mg-
lichkeit binnen Sekunden zwischen geradem und gewinkeltem Aufbau
zu wechseln.
HIGHSPEED POWER SYSTEM
Straight & angled system setup
System Setup
Straight & angled system setup
-
8/13/2019 Adeor Velocity
9/28
09
>The Angled System Setup
Sometimes the anatomical strucutres necessitate an angled system
setup. Compared to the straight setup, it offers better and improved er-
gonomics, especially during longer and delicate procedures. To change
from straight to angled setup, simply exchange the VMM-100S straight
adapter with the VMM-100A angled adapter.
There is no requirement for angled attachments, thereby saving the cus-
tomer money and simplifying maintenance, handling and reprocessing.
>Der gewinkelte Systemaufbau
In manchen Fllen verlangen die anatomischen Strukturen nach einem
gewinkelten System. Tauschen Sie einfach den geraden Adapter gegen
den gewinkelten Adapter. Das ist Alles.
Gewinkelte Aufstze werden berflssig. Das spart Geld und Platz. Der
Umfang des Highspeed Systems wird minimiert und die Handhabung
vereinfacht.
-
8/13/2019 Adeor Velocity
10/28
HIGHSPEED POWER SYSTEM
Perforator setup
Perforator Setup
The Velocity System features a dedicated perforator adapter which can
easily be connected to the Velocity High Speed motor using adeors
unique thumb-snap mechanism. The perforator adaptor is industry-lea-ding in terms of slim-line design and low weight. It offers the user a high
level of torque in combination with a rotational speed of 1200 rpm. With
the integrated Hudson chuck fitting, the adapter can be used with
adeor MERIDIANTM cranial perforators or any other brand perforators.
Das Velocity System bietet die Anschlussmglichkeit eines speziellen
Perforator-Adapters, welcher mit einem Handgriff auf den Highspeed
Motor aufgesetzt werden kann. Der adeorPerforator Adapter ist der
weltweit kleinste und leichteste Adapter seiner Art. Der Adapter funktio-
niert als eine Art Untersetzungsgetriebe, wodurch dem Operateur ein
vielfach erhhtes Drehmoment sowie eine Rotationsgeschwindigkeit von
1200 Upm zur Verfgung gestellt wird. Dank der universellen Hudson
Kupplung knnen sowohl adeorMERIDIANTMPerforatoren als auch
Perforatoren von Drittanbietern verwendet werden.
-
8/13/2019 Adeor Velocity
11/28
11
System Advantages
> Control unit with user-friendly, intuitive operation
> High level of torque
> Top speed of 80,000 rpm
> Minimal thermal warming without the need for complex cooling systems
> Slim, flexible motor cable> Aluminium or stainless steel components
> Multi-functional foot control
> Integrated irrigation pump
> Large selection of cost-effective consumables (cutters/perforators)
> Low maintenance requirements
> Use of adapters reduces attachment/nose piece requirements
> Up to 30 months warranty*
*Standard terms: 24 months. Additional 6 months available at no extra cost (only re-
quires registration by the user with adeor)
> Intuitiv bedienbare Steuereinheit
> Hohes Drehmoment
> 80.000 Upm
> Minimale Erwrmung ohne komplexe Khlsysteme
> Dnnes und extrem flexibles Motorkabel
> Aluminium- oder Edelstahlausfhrung
> Multifunktionales Fupedal
> Integrierte Splpumpe
> Groe Auswahl und kostengnstigen Verbrauchsmaterialien (Frser/Perforatoren)
> Geringer Instandhaltungsaufwand und geringe laufende Kosten
> Adapterlsung verringert den Bedarf an Schften
> Bis zu 30 Monate Herstellergarantie*
*Standardgarantie: 24 Monate.
6 Monate kostenlose Zusatzgarantie bei Systemregistrierung.
-
8/13/2019 Adeor Velocity
12/28
System Components
> Lightweight Aluminium & Stainless Steel
All system components are available in either stainless steel or alumi-nium. Aluminium parts benefit from a significant reduction in overall
weight, improving overall ergonomics of the system. Stainless steel parts
are very durable and hard-wearing. Identification of the different materi-
als is easy: Aluminium parts feature black plastic (PEEK) components
whereas the ones used for stainless steel parts are blue.
Alle Systemkomponenten sind sowohl in Aluminium- als auch Edel-
stahlausfhrung erhltlich. Aluminiumkomponenten zeichnen sich durch
ihr geringes Gewicht und die dadurch verbesserte Ergonomie aus, wh-
rend Edelstahlkomponenten extrem haltbar und belastbar sind. Alumi-
niumkomponenten werden mit schwarzen, Edelstahlkomponenten mit
blauen Peek Komponenten ausgeliefert.
> Nosepieces and Craniotomes / Schfte und Kraniotome
Velocity Nosepieces are available in five different lengths. They allow
the cutting tip to provide smooth and controlled bone dissection for ad-
vanced procedures. No tools are required for assembly of the attache-
ments or cutting burrs. Special designs are available upon request.
Velocity Craniotomes are available in three different lengths. They are
CNC manufactured using one piece of material only. This allows unex-
celled stability and lifetime. No tools are required for assembly of the
craniotomes or cutting burrs. Special designs are available on request.
Velocity Schfte sind in fnf unterschiedlichen Lngen erhltlich. Durch
die hochprzise Fertigung der Velocity Schfte ist eine absolut vibrati-
onsfreie Fhrung des Frsers gewhrleistet. Fr den Zusammenbau ist
kein Werkzeug erforderlich. Spezielle Lngen sind auf Anfrage erhlt-
lich.
Die VelocityKraniotome sind in drei unterschiedlichen Gren erhltlich.
Sie sind aus einem Stck CNC-gefrst wodurch die Kraniotome bei
Haltbarkeit und Lebensdauer neue Mastbe setzen. Fr den Zusam-
menbau ist kein Werkzeug erforderlich. Spezielle Gren sind auf An-
frage erhltlich.
HIGHSPEED POWER SYSTEM
System components
-
8/13/2019 Adeor Velocity
13/28
13
ZMM-100S ZMM-100A
straight adapter. stainless steel. angled adapter. stainless steel.
Lightweight Aluminium Series
VMM-100S VMM-100Astraight adapter. aluminium. angled adapter. aluminium.
Stainless Steel Series
Highspeed Motor
VMM-100EC80.000 rpm with integrated 3.0 m motor cable
Perforator adapter
VMT-102EHudson Fitting. 1:64 ratio.
-
8/13/2019 Adeor Velocity
14/28
ZMC-001 ZMC-002 ZMC-003
Short craniotome 11 mm Medium craniotome 14 mm Long craniotome 24 mm
ZMC-001 ZMC-002 ZMC-003Kurzes Kraniotom 11 mm Mittleres Kraniotom 14 mm Langes Kraniotom 24 mm
* indicated length refers to working length* angegebene Lngen beziehen sich auf die Arbeitslnge
ZMN-SI ZMN-VI ZMN-BL ZMN-BA ZMN-RE
nosepiece 62 mm nosepiece 79 mm nosepiece 109 mm nosepiece 185 mm nosepiece 262 mm
ZMN-SI ZMN-VI ZMN-BL ZMN-BA ZMN-RE
Schaft 62 mm Schaft 79 mm Schaft 109 mm Schaft 185 mm Schaft 262 mm
* indicated length refers to working length* angegebene Lngen beziehen sich auf die Arbeitslnge
HIGHSPEED POWER SYSTEM
System components
Stainless Steel Series
-
8/13/2019 Adeor Velocity
15/28
15
VMC-001 VMC-002 VMC-003
Short craniotome 11 mm Medium craniotome 14 mm Long craniotome 24 mm
VMC-001 VMC-002 VMC-003Kurzes Kraniotom 11 mm Mittleres Kraniotom 14 mm Langes Kraniotom 24 mm
* indicated length refers to working length* angegebene Lngen beziehen sich auf die Arbeitslnge
VMN-SI VMN-VI VMN-BL VMN-BA VMN-RE
nosepiece 62 mm nosepiece 79 mm nosepiece 109 mm nosepiece 185 mm nosepiece 262 mm
VMN-SI VMN-VI VMN-BL VMN-BA VMN-RE
Schaft 62 mm Schaft 79 mm Schaft 109 mm Schaft 185 mm Schaft 262 mm
* indicated length refers to working length* angegebene Lngen beziehen sich auf die Arbeitslnge
Lightweight Aluminium Series
-
8/13/2019 Adeor Velocity
16/28
HIGHSPEED POWER SYSTEM
System overview
Nosepieces> stainless steel & lightweight aluminium
Craniotomes> stainless steel & lightweight aluminium
-
8/13/2019 Adeor Velocity
17/28
17
Straight and angled adapters> stainless steel & lightweight aluminium
Highspeed motor> 80.000 rpm with integrated 3.0 m cable
Perforator adapter> high torque - 1:64 ratio
Control unit>with integrated irrigation pump
-
8/13/2019 Adeor Velocity
18/28
mm
mm
HEAD adeor Velocity attachments
SI VI BL BA RE
0.8 mm SI-170-8 VI-170-8 BL-170-8 BA-170-8 RE-170-8
1.0 mm SI-170 VI-170 BL-170 BA-170 RE-170
1.5 mm SI-171 VI-171 BL-171 BA-171 RE-171
2.1 mm SI-172 VI-172 BL-172 BA-172 RE-172
3.3 mm SI-173 VI-173 BL-173 BA-173 RE-173
4.2 mm SI-174 VI-174 BL-174 BA-174 RE-174
5.0 mm SI-174-5 VI-174-5 BL-174-5 BA-174-5 RE-174-5
6.0 mm SI-175 VI-175 BL-175 BA-175 RE-175
8.0 mm SI-174-8 VI-174-8 BL-174-8 BA-174-8 RE-174-8DiamondBall
HEAD adeor Velocity attachments
SI VI BL BA RE
0.8 mm SI-170-8C VI-170-8C BL-170-8C BA-170-8C RE-170-8C
1.0 mm SI-170C VI-170C BL-170C BA-170C RE-170C
1.5 mm SI-171C VI-171C BL-171C BA-171C RE-171C
2.1 mm SI-172C VI-172C BL-172C BA-172C RE-172C
3.3 mm SI-173C VI-173C BL-173C BA-173C RE-173C
4.2 mm SI-174C VI-174C BL-174C BA-174C RE-174C
5.0 mm SI-174-5C VI-174-5C BL-174-5C BA-174-5C RE-174-5C
6.0 mm SI-175C VI-175C BL-175C BA-175C RE-175C
8.0 mm SI-174-8C VI-174-8C BL-174-8C BA-174-8C RE-174-8CDiamondBallC
oarse|grob
HEAD adeor Velocity attachments
SI VI BL BA RE
1.0 mm SI-051 VI-051 BL-051 BA-051 RE-051Pin
mm
HIGHSPEED POWER SYSTEM
HiCUTTM Highspeed Burs and Cutters
-
8/13/2019 Adeor Velocity
19/28
mm
mm
mm
HEAD adeor Velocity attachments
SI VI BL BA RE
1.0 mm SI-004-1 VI-004-1 BL-004-1 BA-004-1 RE-004-1
1.5 mm SI-0042 VI-0042 BL-0042 BA-0042 RE-0042
2.0 mm SI-004-2 VI-004-2 BL-004-2 BA-004-2 RE-004-2
3.2 mm SI-004 VI-004 BL-004 BA-004 RE-004
4.0 mm SI-004-4 VI-004-4 BL-004-4 BA-004-4 RE-004-4
4.8 mm SI-005 VI-005 BL-005 BA-005 RE-005
6.4 mm SI-006 VI-006 BL-006 BA-006 RE-006
7.9 mm SI-007 VI-007 BL-007 BA-007 RE-007Ball
HEAD adeor Velocity attachments
SI VI BL BA RE
6.5 mm SI-048 VI-048 BL-048 BA-048 RE-048
9.5 mm SI-049 VI-049 BL-049 BA-049 RE-049Barrel|Trommel
HEAD adeor Velocity attachments
SI VI BL BA RE
6.4 mm SI-024 VI-024 BL-024 BA-024 RE-024
7.9 mm SI-032 VI-032 BL-032 BA-032 RE-032
9.5 mm SI-038 VI-038 BL-038 BA-038 RE-038Acorn|Tulpe
-
8/13/2019 Adeor Velocity
20/28
mm
mm
mm
mm
HEAD adeor Velocity attachments
SI VI BL BA RE
1.65 L=10 mm SI-001 VI-001 BL-001 BA-001 RE-001
1.65 L=20 mm SI-002 VI-002 BL-002 BA-002 RE-002Lindeman
n
HEAD adeor Velocity attachments
SI VI BL BA RE
1.5 mm ,SI-003 VI-003 BL-003 BA-003 RE-003
2.0 mm SI-103 VI-103 BL-103 BA-103 RE-103Drill
HEAD adeor Velocity attachments
SI VI BL BA RE
1.0 mm SI-085-1 VI-085-1 BL-085-1 BA-085-1 RE-085-1
1.8 mm SI-085 VI-085 BL-085 BA-085 RE-085
2.2 mm SI-084 VI-084 BL-084 BA-084 RE-084
3.0 mm SI-008 VI-008 BL-008 BA-008 RE-008Neuro
HEAD adeor Velocity attachments
SI VI BL BA RE
1.0 mm SI-085-1D VI-085-1D BL-085-1D BA-085-1D RE-085-1D
1.8 mm SI-085D VI-085D BL-085D BA-085D RE-085D
2.2 mm SI-084D VI-084D BL-084D BA-084D RE-084D
3.0 mm SI-008D VI-008D BL-008D BA-008D RE-008DNeuroDiamond
HIGHSPEED POWER SYSTEM
HiCUTTM Highspeed Burs and Cutters
-
8/13/2019 Adeor Velocity
21/28
mm
mm
mm
mm
HEAD adeor Velocity attachments
SI VI BL BA RE
3.1 mm SI-015 VI-015 BL-015 BA-015 RE-015Cem
ent&MetalCutter
HEAD adeor Velocity attachments
short medium long
1.6 mm GR-001 GR-002 GR-003Craniotom
estraight
HEAD adeor Velocity attachments
short medium long
1.6 mm GR-001X GR-002X GR-003XCraniotometwisted
HEAD adeor Velocity attachments
SI VI BL BA RE
4.0 mm SI-090 VI-090 BL-090 BA-090 RE-090
5.5 mm SI-090-1 VI-090-1 BL-090-1 BA-090-1 RE-090-1Oval
2
STERILE R
-
8/13/2019 Adeor Velocity
22/28
HIGHSPEED POWER SYSTEM
MERIDIANTM Cranial Perforators
MERIDIANTM Single-Use Perforators
pediatric. for use on skulls as thin as 1.5 mm
MERIDIANTM SINGLE-USE CRANIAL PERFORATOR
PER 6-9-SP 6.0 mm / 9.0 mm ( inner / outer )
for use on skulls as thin as 1.5 mm
sterile, single-use, made in Germany
Hudson fitting
MERIDIANTM SINGLE-USE CRANIAL PERFORATOR
PER 7-11-SP 7.0 mm / 11.0 mm ( inner / outer )
for use on skulls as thin as 1.5 mm
sterile, single-use, made in Germany
Hudson fitting
MERIDIANTM SINGLE-USE CRANIAL PERFORATOR
PER 11-14-SP 11.0 mm / 14.0 mm ( inner / outer )
for use on skulls as thin as 1.5 mm
sterile, single-use, made in Germany
Hudson fitting
-
8/13/2019 Adeor Velocity
23/28
MERIDIANTM Single-Use Perforators
adult. for use on skulls as thin as 3.0 mm
MERIDIANTM SINGLE-USE CRANIAL PERFORATOR
PER 6-9-S 6.0 mm / 9.0 mm ( inner / outer )
for use on skulls as thin as 3.0 mm
sterile, single-use, made in Germany
Hudson fitting
MERIDIANTM SINGLE-USE CRANIAL PERFORATOR
PER 11-14-S11.0 mm / 14.0 mm ( inner / outer )
for use on skulls as thin as 3.0 mm
sterile, single-use, made in Germany
Hudson fitting
MERIDIANTM SINGLE-USE CRANIAL PERFORATOR
PER 7-11-S7.0 mm / 11.0 mm ( inner / outer )
for use on skulls as thin as 3.0 mm
sterile, single-use, made in Germany
Hudson fitting
2
STERILE R
-
8/13/2019 Adeor Velocity
24/28
MERIDIANTM Multi-Use Perforators
adult. for use on skulls as thin as 3.0 mm
MERIDIANTM MULTI-USE CRANIAL PERFORATOR
PER 7-11 7.0 mm / 11.0 mm ( inner / outer )
for use on skulls as thin as 3.0 mm
multi-use, made in Germany
Hudson fitting
MERIDIANTM MULTI-USE CRANIAL PERFORATOR
PER 11-14 11.0 mm / 14.0 mm ( inner / outer )
for use on skulls as thin as 3.0 mm
multi-use, made in Germany
Hudson fitting
HIGHSPEED POWER SYSTEM
MERIDIANTM Cranial Perforators
-
8/13/2019 Adeor Velocity
25/28
PERFORATOR STORAGE AND REPROCESSING DEVICE
PER SD-7 for PER 7-11 Perforators
PER SD-11 for PER 11-14 Perforators
CNC manufactured
MERIDIANTM Storage and reprocessing device
Unique Benefits
Most intuitive design New safety features
Secure storage
Best reprocessing results
Time and money saving
CNC manufactured
Custom fit
Available for PER 7-11 and PER 11-14 Perforators
Produktmerkmale
Intuitives Produktdesign
Neue Sicherheitsmerkmale
Sichere Lagerung
Beste Aufbereitungsresultate
Spart Zeit und Geld
Passgenau CNC gefrst
Erhltlich fr PER 7-11 und PER 11-14 Perforatoren
-
8/13/2019 Adeor Velocity
26/28
HIGHSPEED POWER SYSTEM
System Components & Technical Data
Velocity aluminium
lightweight setup
Velocity stainless
steel setup
Control unit EU version 220 - 240 V VMM-EC-220
Control unit US version 100 - 130 V VMM-EC-110
Highspeed motor incl. 3.5 mm cable. 1.000 - 80.000 rpm. 2.0 - 70 Ncm VMM-100EC
Straight motor adapter VMM-100S ZMM-100S
Angled motor adapter VMM-100A ZMM-100A
Short nosepiece. 62 mm VMN-SI ZMN-SI
Medium nosepiece. 79 mm VMN-VI ZMN-VI
Long nosepiece. 109 mm VMN-BL ZMN-BL
X-Long nosepiece. 185 mm VMN-BA ZMN-BA
XX-Long nosepiece. 262 mm VMN-RE ZMN-RE
Short craniotome. 11 mm VMC-001 ZMC-001
Medium craniotome. 14 mm VMC-002 ZMC-002
Long craniotome. 24 mm VMC-003 ZMC-003
Trepan adapter. Speed reducer with Hudson fitting. VMT-102E
Multifunctional foot control. Water resistant. VMME-FS
Irrigation tubing set. 6 pcs. sterile packed. VMM-ITS-6
Irrigation tip for SI nosepieces. 10 pcs. sterile packed. VMN-SI-110SU
Irrigation tip for VI nosepieces. 10 pcs. sterile packed. VMN-VI-110SU
Irrigation tip for BL nosepieces. 10 pcs. sterile packed. VMN-BL-110SU
Irrigation tip for BA nosepieces. 10 pcs. sterile packed. VMN-BA-110SU
Transport and storage case. With customized foam inlay. TSC-10
Sterilization tray. With customized silicone inlay. PST-100
Highspeed Oil. 40 ml bottle. ZMM-OIL
Highspeed Oil. 400 ml spray can. ZMM-OIL-SPRAY
System Components / Sytemkomponenten
-
8/13/2019 Adeor Velocity
27/28
Velocity System
EU Version
220 V
Velocity System
US Version
110 V
Supply voltage 220 - 240 V 100 - 130 V
Permitted voltage fluctuation 10 % 10 %
Nominal current 0.1 - 0.8 A 0.2 - 1.7 A
Frequency 50 - 60 Hz 50 - 60 Hz
Mains fuse 2 x 250 V - T 1.25 AH 2 x 250 V - T 1.25 AH
Max. power consumption 170 VA 170 VA
Max. mechanical output power 70 W 70 W
Torque level 2.0 ... 70 Ncm 2.0 ... 70 Ncm
Motor speed range 1.000 - 80.000 rpm 1.000 - 80.000 rpm
Irrigation flow rate @ 65 / 80 / 100 % 65 / 80 / 100 ml/min 65 / 80 / 100 ml/min
Dimensions 255 x 256 x 91 mm 255 x 256 x 91 mm
Weight incl. motor 2.5 kg 2.5 kg
Protection class II II
Applied part Type B Type B
Integrated irrigation pump yes yes
Foot control / danger zone M / ANSI/AAMI AP / IEC 60601-1 AP / IEC 60601-1
Water resistance of foot control / 1 m depth for 1 h IPX8 / IEC 60529 IPX8 / IEC 60529
Pollution level 2 2
Overvoltage category II II
Max. altitude / above sea level 3.000 m 3.000 m
Short term storage temperature 0C ... +40C 32F ... +104F
Compatible with thermo washing machines and autoclavable < 135C / 383F (motor parts) yes yes
Noise level (motor only) acc. to ISO 11498 40 dBA 40 dBA
Technical Data / Technische Daten
-
8/13/2019 Adeor Velocity
28/28
adeor reserves the right of
technical changes.
HEADQUARTERS
adeor Medical AG
Kirchplatz 1
D-82049 Pullach
Germany
Phone +49 (0) 89 74 44 23 98