advisor: prof. c.h. liu
DESCRIPTION
Advisor: Prof. C.H. Liu. UNIVERSAL CONCEPT FOR FABRICATING ARBITRARY SHAPED μIPMC TRANSDUCERS AND ITS APPLICATION ON DEVELOPING ACCURATELY CONTROLLED SURGICAL DEVICES. MEMS2007 Page:32. Gou-Hua Feng and Ri-Hong Chen - PowerPoint PPT PresentationTRANSCRIPT
-
Advisor: Prof. C.H. LiuUNIVERSAL CONCEPT FOR FABRICATING ARBITRARY SHAPED IPMC TRANSDUCERS AND ITS APPLICATION ON DEVELOPING ACCURATELY CONTROLLED SURGICAL DEVICESReporter: sang-chung yang()MEMS2007 Page:32Gou-Hua Feng and Ri-Hong ChenDepartment of Mechanical Engineering, National Chung Cheng University
Sang-chungMSCL
IntroductionWorking principleFabricationTestingResultsConclusions
Outline
Sang-chungMSCL
IntroductionRef: JiannJiann-Liang Chen MD, PhD Ref: Gou-Hua Feng 10cm0.5~1cm
Sang-chungMSCL
tNafionIPMCRef: Yung Yuen CORef: Gou-Hua Feng IntroductionIPMC:Ionic polymer metal composites
Sang-chungMSCL
Working principleWorking principle of an IPMC transducer: (Left) No voltage is applied. (Right) Voltage isapplied to cause IPMC bending.Ref: Byungkyu Kim et al,2003 R:reaction forceE:youngs modulusI:inertiamax:maximum deplacement at tipL:length of IPMC V=0V=5
Sang-chungMSCL
FabricationIPMC fabrication method 1Process flow diagrams for fabricatingIPMC transducers with MEMS parallel processing spirit.
Sang-chungMSCL
IPMC fabrication method 2Fabrication process flow diagram for the production of IPMC transducers Its different compare to method1.Ref: Gou-Hua Feng et al, 2007 Fabrication2.Apply Wax1.Substrate3.Deposit parylene-c4.Remove wax5.Pattern PR6.Spray Nafion7.Remove parylene8.Deposit Pt9.Immersion into NaOH10.After 3 hours
Sang-chungMSCL
FabricationPhotograph of negative photoresist JSR-made micromold array on bulk-micromachined SiN diaphragms.Photograph of diluted Nafion solution sprayed to fill up the micromolds
Sang-chungMSCL
(Top) Individual devices of IPMC transducers with platinum electrodes simultaneously formed on top and bottom surfaces. (Bottom right) Cross-sectional view of the device with a clear edge that no short-circuits occur. (Bottom left) A newly developed device with varied thicknessFabrication
Sang-chungMSCL
TestingExperimental setup for measuring displacement of actuated IPMC transducers.Experimental setup for measuring force output of the device with a high-resolution (0.01 mN) electronic balance.
Sang-chungMSCL
Relationship between the displacement and frequency.Results
Sang-chungMSCL
ResultsResults of instantaneous maximum output force vs. applied voltage for 0.5, 1, and 1.5 Hz.
Sang-chungMSCL
Demonstration of the IPMC transducer gripping a flexible tube (Left: Front view; Bottom right: side view).Results
Sang-chungMSCL
IPMC ?IPMC IPMC
Conclusions
Sang-chungMSCL
IntroductionRef: Ref: Byungkyu Kim et al,2003
0.01mN