동아스틸주식회사 - dosco. · pdf file고객의 신뢰로 커가는 기업 동아스틸...
Post on 06-Feb-2018
231 Views
Preview:
TRANSCRIPT
THE FUTURE OF DOSCO DEPENDS ON OUR CLIENT’S SUCCESS
본사 Head Office부산광역시 사상구 감전동 152-2번지 우창빌딩 405호Room 405 Woochang B/D, 152-2, Gamjeon-dong, Sasang-gu, BusanTEL 051-320-3000 / FAX 051-326-8883~4
광양공장 Gwangyang Factory전라남도 광양시 태인동 1653-12번지1653-12, Taein-dong, Gwangyang City, Jeonranam-doTEL 061-797-8080 / FAX 061-797-8099
경인영업소 Kyungin Branch Office경기도 시흥시 정왕동 2210 랜드프라자 207207 Landplaza, 2210, Jeongwang-dong, Siheung City, Gyeonggi-do, KoreaTEL 031-434-9981 / FAX 031-434-9987
대구영업소 Daegu Branch Office대구광역시 북구 산격동 16261767, Sangyeok-dong, Buk-gu, DaeguTEL 053-381-1781 / FAX 053-381-1784
DOSCO America, Inc.19401 Vermont Ave, Suite#1106, Torrance, CA90502, USATEL +1-310-527-0086 / FAX +1-310-527-2270
동아스틸주식회사
고객의 신뢰로 커가는 기업 동아스틸DOSCO, the company that grows on you.
동아스틸(주)은 1987년 설립 후 발전을 거듭하며 2003년 7월 광양공장에
연간 20만톤의 CGL(연속용융아연도금)설비, 10″중경관 설비,
그리고 국내 최초 내면까지 도장한 슈퍼칼라각관 설비 등을 갖추어
고객의 신뢰를 한 단계 높였습니다.
또한 품질이 뒷받침된 고품질의 제품을 공급함으로써,
고객의 만족으로 성장하고 있는 동아스틸(주)입니다.
“인간존중, 미래창조, 고객신뢰”라는 동아스틸(주)의 경영이념을 고객에게 전하기 위해
끊임없는 연구개발 등의 노력을 하고 있습니다.
보다 나은 품질, 보다 우수한 제품을 전하기 위해 노력하는 기업이 되겠습니다.
변화를 주도하는 종합철강 회사, 고객의 사랑으로 성장하는 기업, 동아스틸(주)입니다.
Since the establishment of DOSCO in 1987, We have experienced continuous growth
while providing the best quality products to our clients.
With our technical expertise, we have produced 200,000 tons a year of Continuous Galvanized,
100,000 tons a year of 10” tubing and 50,000 tons of super color square tubing with inner-rust
preventive finish, first ever in Korea, all with on time deliveries to serve our valuable clients.
Dosco’s management philosophy is based on Human Respect, Future innovations,
and Customer trust in providing top quality to our clients with endless research and development.
DOSCO, the company with ever changing vision will always offer you support as a complete steel company.
CONTENTS
2 경영이념 / Vision
5 연혁 / Company History
6 생산설비 / Production Facilities
- 연속아연도금라인 / Continuous Galvanizing Line
- 조관라인 / Tubing Line
- 슈퍼칼라 도장라인 / Super Color Tubing Line
- 형강라인 / Forming Line
- 슬리팅라인 / Slitting Line
12 주요생산품 / Main Products
14 표준규격 / Standard Specifications
23 기술개발 및 인증
/ Technical Development and Certification
Our company strives for continuous development of new products and quality improvement.
각에서 원으로 무한의 가능성을 표현하고 Pipe Maker를 형상화한다.
DOSCO는 영문(Dong-A Steel Company)의 머리 글자이며, 두 줄
은 균형과 화합의 의미를 부여한다.
DOSCO is derived from the first syllable of Dong-A Steel Company, and the two lines represent balance and unity.
인간존중·미래창조·고객신뢰Human Respect · Future Innovation · Customer’s Trust
연혁 [ Company History ]
Sep. 1987. 회사설립(동아강제공업사)
Company established as DONG-A STEEL PIPE CORP.
Apr. 1991. 동아강제 주식회사로 법인전환
Company incorporated as DONG-A STEEL PIPE CO., LTD
Jan. 1994. 동아강제 주식회사 제2공장 완공
The second factory completed.
Mar. 1994. 제2공장 4″ 강관 생산 체제
Pipe production expanded to include 4” Tubing line.
May. 1995. 대표이사 변경 (김종주 → 김준형)
CEO changed From Kim Jong-joo to Kim Jun-hyeong.
May. 1995. 무역업 등록
Registered with the Korea Trade Association.
Dec. 1996. 제1공장 소재생산라인을 제2공장으로 이전 설치
The material production line moved from the first factory to the second factory.
Sep. 1997. 제2공장 칼라 C형강 설비완료 및 생산
The second factory equipped with the color C-section production facility.
Aug. 2000. 상호 변경 <동아강제(주) → 동아스틸(주)>
Company name changed from DONG-A STEEL PIPE CO., LTD. to DONG-A STEEL CO., LTD.
Aug. 2002. 부산공장 HSB / ISO 9002: 1994 품질경영시스템 인증서 획득
Busan Factory Certified by HSB and ISO 9002: 1994 Quality Control Systems Certification by KSA.
Jul. 2003. 광양공장 준공 C.G.L, 조관(10″, 5″, 2″), SHEAR, SLITTER, S.C.P
Gwangyang factory completed with Continuous Galvanizing Line, 10”, 5”, 2” tubing line, shearing, slitting, S.C.P Line, etc.
Apr. 2004. 특허 및 실용신안 등록(내면이 도장된 각관과 그 생산 시스템)
Obtained patent for the inner-coated tubes and the manufacturing system.
Jun. 2004. 광양공장 KSA / ISO 9001: 2000 품질경영체제 인증서 획득
Certified for ISO 9001: 2000 Quality Control Systems Certification by KSA.
Nov. 2004. KS 제품 인증 획득 (일반구조용 각형각관)
Obtained Korea Industrial Standard Certification (Carbon Steel Tubes for General Structural Purposes)
Jan. 2005. 미국법인 설립
DOSCO America, Inc. established.
Sep. 2005. JIS제품 인증 획득 (일반구조용 각형강관, 일반구조용 탄소강관)
Obtained Japanese Industrial Standard Certification (Carbon Steel Square and Carbon Steel Tubes for General Structual Purposes)
Jan. 2006. 기술연구소 설립
Organized technical research center at Gwangyang factory
Mar. 2006. KS제품 인증 추가 획득 (일반구조용 탄소강관, 배관용 탄소강관, 압력 배관용 탄소강관)
Obtained Korea Industrial Standard Certification (Carbon Steel Tubes for General Structual Purposes, Carbon Steel Pipes for General Structual Purposes Carbon Steel Pipes for Pressure Service)
Mar. 2006. 중국지사 설립
Dosco China office opened in Beijing
Jun. 2009. KS 백관 인증 획득
Obtained korea Industrial Standard Certification (Carbon Steel Pipes for ordinary piping-white pipe)
Apr. 2010. 광양공장 조관기 증설 (2", 1¼")
Gwangyang Factory equipped with the 2”, 1¼” tubing line
본사 Head Office
경인영업소 Kyungin Branch Office
미국법인 DOSCO America, Inc.
대구영업소 Daegu Branch Office
광양공장 Gwangyang Factory
마음과 마음을 이어주는 징검다리를 고객의 가슴 속에 만듭니다.
한 조각의 철에도 따뜻한 마음을 담기 위해 노력하는 동아스틸
고객 여러분께 감동을 전하는 대한민국의 종합 철강회사입니다.
Our goal is to work with you to develop the most advanced steel products
while achieving the highest quality through our advanced automated processes.
www.dosco.com
DO
NG
-A S
TEEL
CO
., L
TD.
6
DO
NG
-A S
TEEL CO
., LTD.
www.dosco.com
7
생산설비 [ Production Facilities ]
연속아연도금라인 | Continuous Galvanizing Line |
HGI / P.O. SkelpThickness : 1.2 ~ 3.2mm( ” ~ ⅛”)
Width : Max.600mm(max.23½”)
내경(I.D) : 508mm(20”)
외경(O.D) : 900 ~ 2,000mm(35”~ 80”)
Hot Galvanized Steel Coils
21세기 국가산업 기술력 신장의 일환으로 연속
아연도금라인을 도입하여 철강재 가공분야의
기술력을 한층 더 발전시키는 계기가 될 것입니
다. C.G.L 라인은 중앙 컴퓨터에 의해 생산설비
가 제어·운용되며 특수장치 및 검사장비 (X-
ray)로 철판의 도금량을 일정수준(~600g/㎡)으
로 유지시키는 고도의 기술이 활용된 설비로 일
반 구조용 탄소강관, 일반 구조용 각형강관, 비
닐하우스용, 울타리용 구조강관, 비계용 강관,
차량 선박용 등에 사용합니다.
We have introduced a C.G.L line in order to con-
tribute to national industrial development in the
21st century. The C.G.L line enhances our steel
product processing technology. This C.G.L is line
controlled and operated by a central computer
and designed to maintain the steel plate coating
amount at a certain level(~600g/㎡). It does this
using various special high-tech mechanisms
and testing devices, including X-ray. This line is
used to process carbon steel pipes and angled
steel pipes for ordinary structure as well as for
the steel pipes for green houses, fences, scaf-
folds, vehicles and vessels.
공 정 도 | Production Process
광 양 공 장 | Gwangyang Factory
Continuous Galvanizing Line Tubing Line Super Color Tubing Line Forming Line Slitting Line
제품 특성 | Product Characteristics
· 강판의 표면조도 및 균일성 우수.
· 아연도금으로 내부식성이 우수함.
· Zero, Minimized, Regular spangle로 외관이 수려함.
· 최적의 용융 아연도금로 제어로 도금 부착량이 균일함.
· 아연 부착량은 양면 120 ~ 600g/㎡.
· Superior surface roughness and uniformity of steel pipes
· Outstanding corrosion-resistance due to galvanization
· Beautiful appearance due to Zero ,Minimized, Regular spangle
· Uniformed coating due to the optimized zinc melting pot control
· Availability of zinc coating : 120 ~ 600g/㎡ on both sides
설비명 Facility 제품두께 Thickness 생산폭 Width 아연부착량 Zinc Coating 설비능력 Capacity
C.G.L연속아연도금설비 1.2 ~ 3.2mm 200 ~ 600mm 120 ~ 600g/㎡
(Both surface) 200,000 ton/year
www.dosco.com
DO
NG
-A S
TEEL
CO
., L
TD.
8
DO
NG
-A S
TEEL CO
., LTD.
www.dosco.com
9
조관라인 | Tubing Line | 슈퍼칼라 도장라인 | Super Color Tubing Line |
상하수도, 공업용수, 오일, 가스
수송, 선박과 토목, 건축, 철탑,
발판, 지주, 난간 및 울타리, 지
면 미끄럼 방지 말뚝, 자동차, 그
밖의 구조물 등의 강관제품 생산
설비
In-line process of square and
rectangular tubes for fences,
engineering, construction, steel
towers, scaffolds, cars, supports
and handrails, water-supply and
drainage, industrial water, gas
carriage, vessels.
토목, 건축, 기계, 조선 등 다양하게 사용되고 있
는 일반구조용 및 기계구조용 강관의 내·외면
도장 설비
In-line coating process for internal and external
coating of super color tubes, used in engineer-
ing, construction, machinery and ship building
applications.
공 정 도 | Production Process 공 정 도 | Production Process
Continuous Galvanizing Line Continuous Galvanizing LineTubing Line Tubing LineSuper Color Tubing Line Super Color Tubing LineForming Line Forming LineSlitting Line Slitting Line
설비명 Facility 생산규격 Size 제품두께 Thickness 제품길이 Length 설비능력 Capacity
P - 1 Ø21.7~Ø60.5□20 ~ □50 1.2 ~ 3.9mm 4.0 ~ 12.0m 30,000ton/year
P - 3 Ø21.7~Ø60.5□20 ~ □40 1.2 ~ 2.3mm 4.0 ~ 10.0m 30,000ton/year
P - 4 □50 ~ □100 1.4 ~ 4.5mm 4.0 ~ 12.0m 40,000ton/year
P - 5 Ø139.8~Ø267.4□100 ~ □200 4.1 ~ 9.5mm 4.5 ~ 15.0m 100,000ton/year
P - 6 Ø15.9~Ø31.8□12.7 ~ □25 0.8 ~ 1.8mm 4.5 ~ 12.0m 15,000ton/year
광 양 공 장 | Gwangyang Factory 광 양 공 장 | Gwangyang Factory
설비명 Facility 생산규격 Size 제품두께 Thickness 제품길이 Length 설비능력 Capacity
SCP □40 ~ □200 1.2 ~ 9.5mm 4.0 ~ 12.0m 50,000ton/year
www.dosco.com
DO
NG
-A S
TEEL
CO
., L
TD.
10
DO
NG
-A S
TEEL CO
., LTD.
www.dosco.com
11
형강라인 | Forming Line | 슬리팅라인 | Slitting Line |
공장 및 조립식 주택건설용 등 건축자재인 Color 및 Clean
Room에 사용하는 Z형강, H.G.I C형강, Black C형강과 상용
차 차체 등에 소요되는 다양한 포밍제품의 생산설비
In-line Process of H.G.I and black section shaped steel prod-
ucts used for factory, assembled housing, color or clean rooms,
as well as commercial, industrial and automobile applications.
공 정 도 | Production Process 공 정 도 | Production Process
Continuous Galvanizing Line Continuous Galvanizing LineTubing Line Tubing LineSuper Color Tubing Line Super Color Tubing LineForming Line Forming LineSlitting Line Slitting Line
강관, 형강 및 미니강판의 원재료인 스켈프(강대)
생산설비
In-line slitting of steel coils for steel tubing, C-form-
ing and mini steel plating.
광 양 공 장 | Gwangyang Factory 광 양 공 장 | Gwangyang Factory
설비명 Facility 생산규격 Size 제품두께 Thickness 제품길이 Length 설비능력 Capacity
C - 1 60×30×10mm 150×50×20mm 1.6 ~ 4.5mm 6 ~ 12m 30,000ton/year
설비명 Facility 절단두께 Thickness 절단폭 Width 설비능력 Capacity
SLITTER#1 1.2 ~ 4.5mm 50 ~ 1,250mm 60,000ton/yearSLITTER#2 1.2 ~ 9.0mm 50 ~ 1,650mm 300,000ton/yearSLITTER#3 1.2 ~ 3.2mm 50 ~ 1,250mm 90,000ton/year
주요생산품 [ Main Products ]
일반구조용탄소강관CARBON STEEL TUBES FOR GENERAL STRUCTURAL PURPOSE
토목, 건축, 철탑, 족장, 지주 등
For Engineering, Building, Steel Towers,Props including foot props, etc.
KS D 3566(STK) JIS G 3444(STK)
파형강관CORRUGATED STEEL PIPES
농업용수로, 배수관,
수로용암거 소형 터널 등
Irrigation & Agricultural Water systems,Tunnel, etc.
KS D 3590
일반구조용각형강관CARBON STEEL SQUARE TUBES FOR GENERAL STRUCTURAL PURPOSE
토목, 건축, 철탑, 콘테이너, 자동차,
자동화창고, 주차설비 등
For Engineering, Building, Cars, Steel Towers, Automatic Storehouses,Containers, Parking Equipment, etc.
KS D 3568(SPSR) JIS G 3466(STKR)
BS구조용강관STEEL TUBES FOR BS STRUCTURAL PURPOSE
건축, 교량, 기계, 자동차, 자전거,
전주, 틀비계, 철재가구, 지주, 난간 등
For Building, Bridges, Machinery, Motorcars, Bicycles, Electric Light Posts, Scaffolding, Steel Funiture, Supports, Hand Rails, etc.
압력배관용탄소강관CARBON STEEL PIPES FOR PRESSURE SERVICE
350℃정도 이하에서 사용하는
압력배관
KS D 3562 JIS G 3454
용융아연도 강대 및 강판HOT GALVANIZED STEEL COILS
일반구조용, V/H, C-CHANNEL,
비닐하우스용 강관 등
Steel pipes for ordinary structures, V/H, C-Channel, Green house, etc.
KS D 3502
아연도금 C형강GALVANIZED C-CHANNEL
칼라C형강COLOR C-CHANNEL
건축, 기계, 주차설비, 축사, 교량 등
For Building, Machinery,
Parking Equipment, Cattle Sheds, Bridges, etc.
KS D 3530
철판SHEET
기계, 건축, 자동차, 철재가구,
보호벽, 선박 등
For Machinery, Building, Motorcar, Steel Funiture, Making Walls, Ship piping, etc.
슈퍼칼라도장각관SUPER COLOR TUBES
아연도금각관GALVANIZED SQUARE TUBES
건축, 난간, 지주, 기계, 울타리 등
For Building, Hand Rail, Support, Machinery, Fence, etc.
배관용탄소강관CARBON STEEL PIPES FOR ORDINARY PIPING
상하수도, 공업용수, 관개용수, 오일 및
가스수송, 저수용, 소화전, 선박 및 기타
For City & Industrial Water system, Irrigation & Agricultural Water systems, Oil & Gas Supplys, Sprinklers, Ship Piping, etc.
KS D 3507 JIS G 3452
아연도금 Z형강GALVANIZED Z-CHANNEL / PURLIN
토목, 건축, 자동화창고, 주차설비 등
For Engineering, Building, Automatic Storehouse, Parking-Equipment, etc.
산세 강대PICKLED & OILED STEEL COILS
일반구조용, 자동차용, 가전용,
DRAWING용, PANEL용 등
For Ordinary Structures, Cars, Home appliances, Drawing, Panels, etc.
단관 비계STEEL PIPES SCAFFOLDING
조립식 비계FRAME SCAFFOLDING
강관 지주STEEL PIPE SUPPORT
www.dosco.com
DO
NG
-A S
TEEL
CO
., L
TD.
14
DO
NG
-A S
TEEL CO
., LTD.
www.dosco.com
15
용융 아연 도금 강판 및 강대 Hot-dip Zinc-coatedSteel Sheets and Coils KS D 3506 (JIS G 3302)[ ]
표준규격 [ Standard Specifications ]
종류의 기호
Designation of grade
기계적 성질 Mechanical Characteristics
표시두께 Thickness(mm)
적용 Applications항복점
Y.P(N/㎟) min.인장강도
9min.연신율
E.L(%) min.
굽힘성(180°) Bend Test
표시두께 1.6mm미만 Thickness<1.6mm
표시두께 1.6mm이상 3.0mm미만 1.6mm ≤ Thickness < 3.0mm
표시두께 3.0mm이상 Thickness > 3.0mm
≤ Z27, Z35 Z45, Z60 ≤ Z27 Z35 Z45, Z60 ≤ Z27, Z35 Z45, Z60
SGHC - - - 1 2 1 2 2 2 2
1.2 ~ 3.2
일반용General Purpose
SGH340 245 340 20 1 2 1 1 2 2 2
구조용 Constructual Purpose
SGH400 295 40018
2 2 2 2 2 3 3
SGH440 335 440
3 3 3 3 3 3 3SGH490 365 490 16
SGH540 400 540
비고) 1) SGHC는 일반적으로 항복점 205N/㎟이, 인장강도 270N/㎟이상이다. (시험편 5호 압연 방향)
2) 열연 원판을 사용했을 때는 표시두께 1.6mm이상에 대하여 적용한다.
3) 굽힘성 수치는 굽힘의 안쪽 간격으로서 표시두께의 판 매수를 나타낸다.
Remark) 1) For SGHC, YS is 205N/㎟ or over and TS is 270N/㎟ or over. 2) For Hot-Rolled Steel, the above applies to 1.6mm or over thickness 3) Bend data indicates the number of samples put into the inside of bend sample.
도금의 표면 다듬질의 종류 Classification of coating surface finishes 기호 Symbols 비고 Remark
레귤러 스팽글 Regular Spangle R아연결정이 일반적으로 응고 과정에서 생성되어 스팽글을 가진 것Spangles as a result of the restricted growth of Zinc Crystals during normal Solidification
미니마이즈드 스팽글 Minimized Spangle Z스팽글을 아주 미세화한 것 Spangles obtained by restricted normal spangle formation to a minimum
화학처리의 종류 Classification of chemical treatments 기호 Symbol
일반크롬산 처리 Ordinary chromate treatment C
인산염 처리 Phosphate treatment P
무처리 Nontreated M
도금의 종류 Oiling Classification 기호 Symbols
도유 Oiled ○
무도유 Not Oiled ×
스킨패스 처리 | Skin Passing
도금제품 표면을 매끄럽게 하기 위한 스킨패스 처리는 주문자의 지정에 따른다. 이때 기호는 S로 한다.
Skin Passing to obtain surface smoothness shall be specified by the purchaser. In this case, symbols shall be S.
기계적 성질 및 표시두께 | Mechanical Characteristics & Thickness
도금의 표면 다듬질의 종류 및 기호 | Classification of coating surface finishes and their symbols
화학처리의 종류 및 기호 | Classification of chemical treatments and their symbols
도유의 종류 및 기호 | Oiling Classification and symbols
치수 허용차 | Dimensional Tolerances 1) 두께 허용차 | Tolerances on Thickness
표시두께 Thickness
나비(일반용) Width(General Purpose)
나비(구조용) Width(Constructual Purpose)
1,200미만W < 1,200
1,200이상 1,500미만
1,200 ≤ W < 1,500
1,500이상 1,800미만
1,500 ≤ W < 1,800
1,800이상 2,300미만
1,800 ≤ W < 2,300
1,600미만W < 1,600
1,600이상 2,000미만
1,600 ≤ W < 2,000
T < 2.0 ±0.17 ±0.18 ±0.19 ±0.22⑵ ±0.20 ±0.24
2.0 ≤ W < 2.5 ±0.18 ±0.20 ±0.22 ±0.26⑵ ±0.21 ±0.26
2.5 ≤ W < 3.15 ±0.20 ±0.22 ±0.25 ±0.27 ±0.23 ±0.30
3.15 ≤ W < 4.0 ±0.22 ±0.24 ±0.27 ±0.28 ±0.25 ±0.35
(unit: mm) 1) 나비 및 직선도 허용치
| Tolerances on Width & Camber
나비Width
열연 원판을 사용하는 경우Hot-rolled base meatal used 직선도
Camber밀에지(A)Mill Edge(A)
커트에지(B)Cut Edge(B)
W ≦ 1,500 +25
0
+10
0
임의의 길이 2,000에 대해 5
5 in any 2,000 of lengthW > 1,500
(unit: mm)
구분 Classification 도금부착량(비합금화) Zinc Coating Mass
도금의 양면 부착량 표시 기호 Symbol for coating mass on both surfaces
(Z06)⑴ Z08 Z10 Z12 Z18 Z20 Z22 Z25 Z27 Z35 Z45 Z60
양면3점법 평균 부착량(g/㎡) Average coating mass in triple-spot test on both surfaces
(60)⑴ 80 100 120 180 200 220 250 275 350 450 600
양면1점 최소 부착량(g/㎡) Minimum coating mass at a single spot on both surfaces
(51)⑴ 68 85 102 153 170 187 213 234 298 383 510
상당 도금두께(mm) Equivalent Coating Thicknesses
0.013 0.017 0.021 0.026 0.034 0.040 0.043 0.049 0.054 0.064 0.080 0.102
양면의 두께가 같은 도금의 양면 최소 부착량 및 상당 도금 두께 | Minimum Coating Mass on Both Surfaces for Sheets or Coils and Equivalent Coating Thickness (unit: g/㎡(Both))
주⑴ ( )안은 인수·인도 당사자 사이의 협정에 따라 적용할 수 있다.
주⑵ 나비 2,000mm미만에 대하여 적용한다.
Remark⑴ ( ) is negotiable according to both party’s agreement.
Remark⑵ Tolerance applies to width under 2,000mm
www.dosco.com
DO
NG
-A S
TEEL
CO
., L
TD.
16
DO
NG
-A S
TEEL CO
., LTD.
www.dosco.com
17
일반구조용 각형강관 Carbon Steel Square Tubes for General Structural Purposes KS D 3568 (JIS G 3466)
치수Size(㎜)
두께Wall Thickness
(㎜)
중량Weight(kg/m)
단면적Area(㎠)
단면2차 모우먼트Moment of Inertia(㎝ )
단면계수Section Modulus(㎤)
단면2차 반지름Radius of Gyration(㎝)
Ix, Iy Zx, Zy ix, iy
20×20 1.21.6
0.6970.872
0.8651.123
0.530.67
0.520.65
0.7690.751
25×25 1.21.6
0.8671.12
1.1051.432
1.031.27
0.8241.02
0.9650.942
30×30 1.21.6
1.061.38
1.3451.752
1.832.31
1.221.54
1.171.15
40×40 1.62.3
1.882.62
2.3923.332
5.797.73
2.903.86
1.561.52
50×501.62.33.2
2.383.344.50
3.0324.2525.727
11.715.920.4
4.686.348.16
1.961.931.89
60×601.62.33.2
2.884.065.50
3.6725.1727.007
20.728.336.9
6.899.4412.3
2.372.342.30
75×75
1.62.33.24.5
3.645.147.019.55
4.6326.5528.92712.17
41.357.175.598.6
11.015.220.126.3
2.992.952.912.85
100×100
2.33.24.04.56.09.0
8.959.5211.713.117.024.1
8.85212.1314.9516.6721.6330.67
140187226249311408
27.937.545.349.962.381.6
3.973.933.893.873.793.65
125×125
3.24.55.06.09.0
12.016.618.321.731.1
15.3321.1723.3627.6339.67
376506553641865
60.180.988.4103138
4.954.894.864.824.67
150×150
4.55.06.09.0
20.122.326.438.2
25.6728.3633.6348.67
896982
115×10158×10
120131153210
5.95.895.845.69
175×1754.55.06.0
23.726.231.1
30.1733.3639.63
145×10159×10186×10
166182213
6.936.916.86
200×200
4.55.06.09.0
27.235.846.952.3
34.6745.6359.7966.67
219×10283×10362×10399×10
219283362399
7.957.887.787.73
종류기호 Designation of grade
KS(JIS)
화학성분(%) Chemical Composition 기계적성질(5호시험편) Mechanical Properties
C Max.
Si Max.
Mn Max.
P Max.
S Max.
인장강도 TS(N/㎟) Min.
항복강도 Y.P(N/㎟) Min.
연신율(%) EL Min.
SPSR400(STKR400) 0.25 - - 0.040 0.040 400 245 23
SPSR490(STKR490) 0.18 0.55 1.50 0.040 0.040 490 325 23
DOSCO SPSR290 - - - 0.050 0.050 290 - -비고) 1. 굽힘성은 주문자의 요구가 있을 경우 용접 부분의 굽힘 시험을 한다.
2. DOSCO SPSR290은 DOSCO 자체 규격의 종류기호입니다.
Remark) 1. Bending Test can be done as per customer’s request. 2. DOSCO SPSR290 is DOSCO’s own designation of grade.
화학성분 및 기계성질 | Chemical Composition & Mechanical Properties
표준치수 및 중량 | Nominal Size & Weight 1) 정방형 | Square
치수Size(㎜)
두께Wall Thickness
(㎜)
중량Weight(kg/m)
단면적Area(㎠)
단면2차 모우먼트Moment of Inertia(㎝ )
단면계수Section Modulus(㎤)
단면2차 반지름Radius of Gyration(㎝)
Ix Iy Zx Zy ix iy
30×201.21.6
0.8681.124
1.1051.4317
1.341.66
0.7110.879
0.8901.11
0.7110.879
1.101.80
0.0820.784
40×201.21.6
1.0531.375
1.34531.7517
2.733.43
0.9231.15
1.361.72
0.9231.15
1.421.40
0.8280.810
50×301.62.3
1.882.62
2.3923.332
7.9610.6
3.604.76
3.184.25
2.403.17
1.821.79
1.231.20
60×301.62.33.2
2.132.983.99
2.1723.7925.087
12.516.821.4
4.255.657.08
4.165.617.15
2.833.764.72
2.152.112.05
1.251.221.18
75×451.62.33.2
2.884.065.50
3.6725.1727.007
28.438.950.8
12.917.622.8
7.5610.413.5
5.757.8210.1
2.782.742.69
1.881.841.80
100×50
1.62.33.24.5
3.645.147.019.55
4.6326.5528.92712.17
61.384.8112147
21.129.038.048.9
12.317.022.529.3
8.4311.615.219.5
3.643.603.553.47
2.132.102.062.00
125×75
2.33.24.04.56.0
6.959.5211.713.117.0
8.85212.1314.9516.6721.63
192257311342428
87.5117141155192
30.641.149.754.868.5
23.331.137.541.251.1
4.654.604.564.534.45
3.143.103.073.042.98
150×100
3.24.56.09.0
12.016.621.731.1
15.3321.1727.6339.67
488658835
113×10
262352444595
65.187.7
52.570.488.8119
5.645.585.505.33
4.144.084.013.87
200×1004.56.09.0
20.126.438.2
25.6733.6348.67
133×10170×10235×10
455577782
133170235
90.9115156
7.207.126.94
4.214.144.01
200×1504.56.09.0
23.731.145.3
30.1739.6357.67
176×10227×10317×10
113×10146×10202×10
176227317
151194270
7.647.567.41
6.136.065.93
250×1506.09.0
35.852.3
45.6366.67
389×10548×10
177×10247×10
311438
236330
9.239.06
6.236.09
1) 장방형 | Rectangle
구분 Specified item and dimension 허용차 Dimensional tolerances
변의 길이Length of side
100㎜ 이하 100㎜ or under ±1.5㎜
100㎜ 초과 Over 100㎜ ±1.5%
각 면의 평판부분의 요철Unevenness Dimensional of plate portion of each side
변의 길이 100㎜ 이하Side length 100㎜ or under
Max. 0.5㎜
변의 길이 100㎜ 초과Side length over 100㎜
변의 길이의 0.5% 이하Within 0.5 of side length
인접 평판 부분 사이의 각도Angularity made by adjacent flat plate portions
±1.5°
구분 Specified item and dimension 허용차 Dimensional tolerances
각 부의 치수: S Dimension at corner: S Max. 3t
길이 Length+∞0
휨 Destraightness전체길이의 0.3% 이하
Within 0.3% of whole length
두께Wall
thickness
용접에 의해 제조한 관Square steel tube manufactured by welding
3㎜미만 Under 3㎜ ±0.3㎜3㎜이상 3㎜ or over ±10%
이음매 없는 관Seamless square steel tube
4㎜미만 Under 4㎜ ±0.6㎜4㎜이상 4㎜ or over ±15%
치수 허용차 | Dimensional Tolerances
www.dosco.com
DO
NG
-A S
TEEL
CO
., L
TD.
18
DO
NG
-A S
TEEL CO
., LTD.
www.dosco.com
19
일반구조용 탄소강관 배관용 탄소강관Carbon Steel Tubes for General Structural Purposes
Carbon Steel Pipes for Ordinary Piping
KS D 3566 (JIS G 3444) KS D 3507 (JIS G 3452)
종류기호 Designation of Grade
KS (JIS)
화학성분(%) Chemical Composition 기계적성질(5호 시험편) Mechanical Properties 편평성 Flat Test 굽힘성(90°) Bending Test
PMax.
SMax.
인장강도T.S (N/㎟)
Min.
연신율E.L (%)Min.
평판사이의 거리(H) Distance between flat sides
50A 이하 적용 50A and under
SPP(SGP) 0.040 0.040 294 25 ⅔ 6D
종류기호 Designation of Grade
KS (JIS)구분 Division 비고 Remark
SPP(SGP)흑관 Black pipe 아연도금을 하지 않은 관 Pipe without zinc coating
백관 Galvanized pipe 흑관에 아연 도금을 한 관 Pipe with zinc coating
호칭지름Nominal Size
바깥지름OD(㎜)
바깥지름의 허용차OD Tolerance
두께Thickness
(㎜)
두께의 허용차Thickness Tolerance
무게Weight(㎏/m)A B
6 ⅛ 10.5 ±0.5㎜ 2.0 ∞
-12.5%
0.419
8 ¼ 13.8 ±0.5㎜ 2.35 0.664
10 ⅜ 17.3 ±0.5㎜ 2.35 0.866
15 ½ 21.7 ±0.5㎜ 2.65 1.25
20 ¾ 27.2 ±0.5㎜ 2.65 1.60
25 1 34.0 ±0.5㎜ 3.25 2.45
32 1¼ 42.7 ±0.5㎜ 3.25 3.16
40 1½ 48.6 ±0.5㎜ 3.25 3.63
50 2 60.5 ±1% 3.65 5.12
65 2½ 76.3 ±1% 3.65 6.34
80 3 89.1 ±1% 4.05 8.49
90 3⅓ 101.6 ±1% 4.05 9.74
100 4 114.3 ±1% 4.5 12.2
125 5 139.8 ±1% 4.85 16.1
150 6 165.2 ±1% 4.85 19.2
175 7 190.7 ±1% 5.3 24.2
200 8 216.3 ±1% 5.85 30.4
225 9 241.8 ±1% 6.2 36.0
250 10 267.4 ±1% 6.40 41.2
종류기호 Designation of Grade
KS (JIS)
화학성분(%) Chemical Composition 기계적성질(5호 시험편) Mechanical Properties
CMax.
SiMax.
MnMax.
PMax.
SMax.
인장강도T.S
(N/㎟)Min.
항복강도Y.P
(N/㎟) Min.
연신율E.L (%)Min.
굽힘성(90°) Bendiang Test
편평성 Flat Test
안쪽반지름 50㎜이하 적용 Inner radius 50㎜
and under
편평사이의 거리(H) Distance between
flat sides
STK290 - - - 0.050 0.050 290 - 25이상 6D ⅔D
STK400 0.25 - - 0.040 0.040 400 235 18이상 6D ⅔D
STK500 0.24 0.35 0.30~1.30 0.040 0.040 500 355 10이상 8D ⅞D
STK490 0.18 0.55 1.50 0.040 0.040 490 315 18이상 6D ⅞D
STK540 0.23 0.55 1.50 0.040 0.040 540 390 16이상 6D ⅞D
비고) 굽힘시험은 주문자의 지정이 있는 경우에 한하고 바깥지름 50㎜이하의 관에 대하여 적용하며, 편평 시험 대신에 실시한다.(D는 관의 바깥지름, 5호 시험편 가로방향)
Remark) Bending test limits to customer’s special request and applies to OD 50㎜ and under. Bending shall be tested to replace flat test.(D: Outer Dimuter)
화학성분 및 기계성질 | Chemical Composition & Mechanical Properties
바깥지름OD(㎜)
두께Thickness
(㎜)
중량Weight(kg/m)
단면적Area(㎠)
단면2차 모우먼트Moment of Inertia
(㎝ )
단면계수Section Modulus
(㎤)
단면2차 반지름Radius of Gyration
(㎝)
21.7 2.0 0.972 1.238 0.607 0.560 0.700
27.2 2.02.3
1.241.41
1.5831.799
1.261.41
0.9301.03
0.8900.880
34.0 2.3 1.80 2.291 2.89 1.70 1.12
42.7 2.32.5
2.292.48
2.9193.157
5.976.40
2.803.00
1.431.42
48.6
2.32.52.83.2
2.632.843.163.58
3.3453.6214.0294.564
8.999.6510.611.8
3.703.974.364.86
1.641.631.621.61
60.52.33.24.0
3.304.525.57
4.2055.7607.100
17.823.728.5
5.907.849.41
2.062.032.00
76.32.83.24.0
5.085.777.13
6.4657.3499.085
43.749.259.5
11.512.915.6
2.602.592.58
89.1 2.83.2
5.966.78
7.5918.636
70.779.8
15.917.9
3.053.04
101.63.24.05.0
7.769.6311.9
9.89212.2615.17
120146177
23.628.834.9
3.483.453.42
114.33.23.54.5
8.779.5812.2
11.1712.1815.52
172187234
30.232.741.0
3.933.923.89
바깥지름OD(㎜)
두께Thickness
(㎜)
중량Weight(kg/m)
단면적Area(㎠)
단면2차 모우먼트Moment of Inertia
(㎤)
단면계수Section Modulus
(㎤)
단면2차 반지름Radius of Gyration
(㎝)
139.8
3.64.04.56.0
12.113.415.019.8
15.4017.0719.1325.22
357394438566
51.156.362.780.9
4.824.804.794.74
165.2
4.55.06.07.0
17.819.823.627.3
22.7225.1630.0134.79
734808952
109x10
88.997.8115132
5.685.675.635.60
190.7
4.55.36.07.08.2
20.724.227.331.736.9
26.3230.8734.8240.4047.01
114x10133x10149x10171x10196x10
120139156179206
6.596.566.536.506.46
216.3
4.56.07.08.0
23.531.136.141.1
29.9439.6146.0352.35
168x10219x10252x10284x10
155203233263
7.497.447.40 7.37
267.4
6.07.08.09.0
38.745.051.257.4
49.2757.2765.1973.06
421x10486x10549x10611x10
315363411457
9.249.219.189.14
표준치수 및 중량 | Nominal Size & Weight
종류기호 | Designation of Grade
화학성분 및 기계적 성질 | Chemical Composition & Mechanical Properties
치수, 무게 및 치수의 허용차 | Size, Weight & Dimensional Tolerances
수압시험 또는 비파괴 검사 | Hydrostatic Test or Nondestructive Test 1) Hydrostatic Test 흑관은 2.5MPa의 수압을 가했을 때, 이에 견디며 누수가 없어야 한다.
When a hydrostatic pressure of 2.5MPa is applied, the black pipe shall show no leakage. 2) Nondestructive Test 흑관은 초음파 탐상검사 또는 와류탐상 검사의 어느 한가지 비파괴 검사를 하고, KS D 0250(JIS G 0582)의 탐상감도구분 UE 또는
KS D 0251(JIS G 0583)의 탐상 감도 구분 EZ의 대비 시험편의 인공홈으로부터의 신호와 동등 이상의 신호가 없어야 한다.
A nondestructive test by either an ultrasonic test or an eddy current test shall be made on the black pipe, and there shall be no signal greater than those produced by the artificial defects of the reference test block of division UE of the working sensitivity specified in KS D 0250(JIS G 0582) or division EZ of the working sensitivity specified in KS D 0251(JIS G 0583).
구분 Classification 바깥지름 허용차 OD Tolerance 구분 Classification 두께의 허용차 Thinckness Tloerance
Class.1OD < 50㎜ ±0.5㎜
Class.1T < 4㎜ +0.6㎜, -0.5㎜
4㎜ ≤ T < 12㎜ +15%, -12.5%OD ≥ 50㎜ ±1% T ≥ 12㎜ +15%, -1.5㎜
Class.2OD < 50㎜ ±0.25㎜
Class.2T < 3㎜ ±0.3㎜
3㎜ ≤ T < 12㎜ ±10%OD ≤ 50㎜ ±0.5% T ≥ 12㎜ +10%, -1.2㎜
치수 허용차 | Dimensional Tolerances
비고) 특별한 지정이 없는 경우 Class 1을 적용한다. Remark) If not specified, apply the Class.1
www.dosco.com
DO
NG
-A S
TEEL
CO
., L
TD.
20
DO
NG
-A S
TEEL CO
., LTD.
www.dosco.com
21
압력 배관용 탄소강관 C 형강 Z 형강
파형 강관
Carbon Steel Tubes for Pressure Service
Corrugated Steel Pipes and Sections
C - Channel Z - Channel / Purlin
KS D 3562 (JIS G 3454)
KS D 3590
호칭명Designation
치수 Size(㎜) 단면적Square Measure
(㎠)
단위무게Square Weight
(kg/m)H×A×C t403140324033
60×30×101.62.02.3
2.0722.5372.872
1.631.992.25
4071 70×40×25 1.6 3.032 2.384113 75×35×15 2.3 3.677 2.89414141424143
75×45×151.62.02.3
2.9523.6374.137
2.322.683.25
422142224223
100×50×201.62.02.3
3.6724.5375.172
2.883.564.06
4224422542264227
100×50×20
2.83.24.04.5
6.2057.0078.5489.469
4.875.506.717.43
4363436543664367
125×50×20
2.33.24.04.5
5.7477.8079.54810.59
4.516.137.508.32
440344054407
150×50×202.33.24.5
6.3228.60711.72
4.966.769.20
치수 Size
200㎜ × 74㎜
두께 Thickness
1.4 ~ 3.2㎜
원자재 Raw Material
ASTM A653 Gr.230 ~ 340 (Gr.33 ~ 50)
JIS G 3302 (KS D 3506) SGH340 ~ 490
도금 부착량 Zinc Coating Mass
Z08(80g/㎡) ~ Z60(600g/㎡)
(양면 Both Surfaces)
기호 Symbols 관경 Outer Diameter(㎜) 두께 Thickness(㎜) 길이 Lenagth(m)
SCP 1RS 300 ~ 2,400 1.6 ~ 2.7 1 ~ 12
SCP 3RS 900 ~ 2,400 2.0 ~ 3.2 1 ~ 12
종류기호 Designation of Grade
KS (JIS)
화학성분(%) Chemical Composition 기계적성질(5호 시험편) Mechanical Properties
CMax.
SiMax.
MnMax.
PMax.
SMax.
인장강도T.S
(N/㎟)Min.
항복강도Y.P
(N/㎟) Min.
연신율E.L (%)Min.
SPPS 38(STPG370) 0.25 0.35 0.30 ~ 0.90 0.040 0.040 373
(370)216
(215) 25
SPPS 42(STPG410) 0.30 0.35 0.30 ~ 1.00 0.040 0.040 412
(410)245
(245) 20
구분 Division 바깥지름의 허용차 Tolerance on outside diameter 두께의 허용차 Tolerance on wall thickness
전기저항 용접 강관Electric Resistance Welded steel pipe
25A or under ±0.3㎜ Under 3 ㎜ ±0.3㎜
32A or over ±0.8% 3㎜ or over ±10%
호칭지름Nominal Size 바깥지름
OD(㎜)
호칭두께 Nominal Thickness
Sch10 Sch20 Sch30 Sch40 Sch60 Sch80
A B두께
Thickness(㎜)
무게Weight(kg/m)
두께 Thickness
(㎜)
무게Weight(kg/m)
두께 Thickness
(㎜)
무게Weight(kg/m)
두께 Thickness
(㎜)
무게㎟Weight(kg/m)
두께 Thickness
(㎜)
무게Weight(kg/m)
두께 Thickness
(㎜)
무게Weight(kg/m)
6 ⅛ 10.5 - - - - - - 1.7 0.369 2.2 0.450 2.4 0.4798 ¼ 13.8 - - - - - - 2.2 0.629 2.4 0.675 3.0 0.79910 ⅜ 17.3 - - - - - - 2.3 0.851 2.8 1.00 3.2 1.1115 ½ 21.7 - - - - - - 2.8 1.31 3.2 1.46 3.7 1.6420 ¾ 27.2 - - - - - - 2.9 1.74 3.4 2.00 3.9 2.2425 1 34.0 - - - - - - 3.4 2.57 3.9 2.89 4.5 3.2732 1 ¼ 42.7 - - - - - - 3.6 3.47 4.5 4.24 4.9 4.5740 1 ½ 48.6 - - - - - - 3.7 4.10 4.5 4.89 5.1 5.4750 2 60.5 - - 3.2 4.52 - - 3.9 5.44 4.9 6.72 5.5 7.4665 2 ½ 76.3 - - 4.5 7.97 - - 5.2 9.12 6.0 10.4 7.0 12.080 3 89.1 - - 4.5 9.39 - - 5.5 11.3 6.6 13.4 7.6 15.390 3 ½ 101.6 - - 4.5 10.8 - - 5.7 13.5 7.0 16.3 8.1 18.7100 4 114.3 - - 4.9 13.2 - - 6.0 16.0 7.1 18.8 8.6 22.4125 5 139.8 - - 5.1 16.9 - - 6.6 21.7 8.1 26.3 9.5 30.5150 6 165.2 - - 5.5 21.7 - - 7.1 27.7 9.3 35.8 11.0 41.8200 8 216.3 - - 6.4 33.1 7.0 36.1 8.2 42.1 10.3 52.3 12.7 63.8250 10 267.4 - - 6.4 41.2 7.8 49.9 9.3 59.2 12.7 79.8 15.1 93.9
화학성분 및 기계성질 | Chemical Composition & Mechanical Properties
치수 허용차 | Dimensional Tolerances
표준치수 및 중량 | Nominal Size & Weight
표준치수 및 중량 | Nominal Size & Weight
생산 규격 | Production Standard
수압시험 또는 비파괴 시험 | Hydrostatic Test or Nondestructive Test 1) Hydrostatic Test
관에 수압을 가하여 규정 압력으로 유지 시켰을 때, 이것에 견디며 누수의 유무를 조사한다.
When the pipe is subjected to hydrostatic pressure and kept under the specified pressure, its strength to withstand the
pressure without leakage shall examined.
2) Nondestructive Test 흑관은 초음파 탐상 검사 또는 와류탐상 검사의 어느 한가지 비파괴 검사를 하고, KS D 0250(JIS G 0582)의 탐상감도구분 UC
또는 KS D 0251(JIS G 0583)의 탐상 감도 구분 EW의 대비 시험편의 인공홈으로부터의 신호와 동등 이상의 신호가 없어야 한다.
A nondestructive test by either an ultrasonic test or an eddy current test shall be made on the pipe, and there shall be no signal greater than those produced by the artificial defects of the reference test block of division UC of the working sensitivity specified in KS D 0250(JIS G 0582) or of division EW of the working sensitivity spcified in KS D 0251(JIS G 0583)
Schedule number 10 20 30 40 60 80
Hydrostatic Test Pressure 20{20} 35{34} 50{49} 60{59} 90{88} 120{118}
A
C
H 200㎜
74㎜
(unit: kgf/㎠ {bar})
www.dosco.com
DO
NG
-A S
TEEL
CO
., L
TD.
22
DO
NG
-A S
TEEL CO
., LTD.
www.dosco.com
23당사는 ISO 9001 품질인증시스템과 KS제품인증을 획득했으며, 특히 슈퍼칼라각관은
기존 칼라각관의 내면부식을 획기적으로 개선하여, 기술력을 인정받아 국내에서 특허등록을
완료하였으며, 제품 또한 국내뿐만 아니라 국제적으로 인정받고 있습니다. 앞으로도
더 많은 기술개발을 통해 연구하는 기업으로 여러분에게 다가갈 것입니다.
Dosco is Obtained for ISO 9001 Certification and KS Certification(Korean industrial Standard).
Our Technical Support Team has successfully improved internal corrosion on
the regular color pipes and has obtained a patent-registration for this.
This Super Color pipe has won recognition from local markets through out the world.
We will work with you to be a leader in research and development.
기술개발 및 인증 [ Technical & Development and Certification ]
동아스틸주식회사는 제품의 생산과 관리에 있어 보다 엄격한 체제를 갖추고 있으며,
동아스틸주식회사만의 독특한 품질보증체계를 통해 생산품의 양과 질에서 국내뿐 아니라 국제적으로도 인정을 받고 있습니다.
또한 전자시스템(바코드 시스템) 구축으로 재고주문 물류를 One stop system으로 운영하고 있습니다.
DOSCO operates a precise production management and control system.
Our unique quality control system ensures high-end production for local and international markets.
In addition, our electronic Bar-Coding controls the inventory as One-stop system.
다양한 제품과 우수한 성능, 최고의 품질로 세계를 향한 도전은 참다운 기업정신을 구현하는
동아스틸주식회사의 약속입니다.
고객의 신뢰와 끊임 없는 기술개발과 연구정신은 미래를 향한 도전정신과 함께
최첨단 기술산업을 만들어가는 동아스틸주식회사의 미래의 약속입니다.
Changing the future with a wide range of products, outstanding performance, and the best quality is
a promise of Dosco, which seeks to be the best enterprise of the 21st century.
Dosco promises customer satisfaction, endless technological development and research to lead
the industry along with challenge-oriented sprit.
화학 성분 분석기 Chemical Composition Tester
금속 현미경 Metallograph
만능 재료 시험기 Universal Test Machine
염수분무 시험기 Salt Water Spray Testera
품질보증 [ Quality Assurance ]
비닐하우스용 도금강관 Carbon Steel Pipes for Plastic Housing
SPVH일반농업용
아연도 강관
SPVH-AZ 55% 알루미늄-아연합금 도금 강관
종류의 기호 | Designation of Grade
기계적 성질 | Mechanical Characteristics
치수, 무게 및 치수의 허용차 | Size, Weight & Dimensional Tolerances
제품 품질 | Product Quality
항복 강도 (N/㎟) 인장 강도 (N/㎟) 연신율 (%)
SPVH 205 이상 270 이상 20 이상
SPVH-AZ 295 이상 400 이상 18 이상
기호 시험방법 도금 부착량 (g/㎡) 평균 도금 두께 굽힘 각도 (˚) 안쪽 반지름
SPVH 관으로 시험할 때 150 이상 6 ㎛ 이상
90 D X 6 SPVH-AZ 관으로 시험할 때 80 이상 6 ㎛ 이상
- 관은 KS D 0201의 염화안티몬법(간접법)에 의한 방법으로 검사한다.
- 아연도강관의 아연도금 양면 부착량은 300g/㎡ 이상이어야 하고 용융 55% 알루미늄-아연합금 도금 강관의 양면 도금 부착량은
160g/㎡ 이상이어야 한다
- 평균 도금 두께 측정은 용사부 도금층 중앙에서 실시한다.
- 굽힘 시험을 하였을 때, 균열이 생기거나 이음매의 떨어짐 또는 도금층이 떨어지거나 균열이 생겨서는 안 된다.
- 용사면에는 용제를 도포하여 부식을 방지하여야 한다.
호칭명 바깥지름치수허용차
(바깥지름)
두께 (㎜)
두께 허용차 : 0.0~+0.13 두께허용차 : 0.0~+0.171.2 1.4 1.5 1.6 1.7 2.0
15 15.9 0.0 ~ +0.5 0.435 0.501 0.533 0.564
19 19.1 0.0 ~ +0.5 0.530 0.611 0.651 0.690
22 22.2 0.0 ~ +0.5 0.621 0.718 0.766 0.813
25 15.4 0.0 ~ +0.5 0.716 0.829 0.884 0.939 0.994
29 28.6 0.0 ~ +0.5 0.811 0.939 1.000 1.070 1.130
32 31.8 0.0 ~ +0.5 0.906 1.050 1.120 1.190 1.260
38 38.1 0.0 ~ +0.5 1.090 0.270 1.350 1.440 1.530 1.780
50 50.8 0.0 ~ +0.5 1.470 1.710 1.820 1.940 2.060 2.410
top related