二葉圓弧線型魯式鼓風機設計 - feu.edu.tw

1854 (Francis Philander Roots) 1960 1970







[13][14][15-16]
Mathematics


(1)”No.17pp.64-75 2008.05.
2. “
3. “
4. “
5. “
(3)”No.24pp.51-61 2008.12.
6. Hongmin Li, “Flow driven by a stamped metal cooling fan – Numerical model and validation”, Experimental Thermal and Fluid Science, Volume 33, Issue 4, pp. 683-694, 2009.
7. Qi Datong, Mao Yijun, Liu Xiaoliang, Yuan Minjian, “Experimental study on the noise reduction of an industrial forward-curved blades centrifugal fan”, Applied Acoustics, Volume 70, Issue 8, pp. 1041-1050, 2009.
8. Chiu-Fan Hsieh, Yii-Wen Hwang, Zhang-Hua Fong, “Study on the tooth profile for the screw claw-type pump”, Mechanism and Machine Theory, Volume 43, Issue 7, pp.812-828, 2008.
9. Giovanni Bonandrini, Giovanni Mimmi, Carlo Rottenbacher, “Toward computerized determination of envelope to family of parametric planar curves”, Computer Methods in Applied Mechanics and Engineering, Volume 198, Issues 27-29, pp. 2218-2224, 2009.
10. M.H. Hablanian, “Engineering aspects of turbomolecular pump design”, Vacuum, Volume 82, Issue 1, pp. 61-65, 2007.
11. H. Z. Zhou, J. Wang, “Helium circulator design and testing”, Nuclear Engineering and Design, Volume 218, Issues 1-3, pp. 189-198, 2002.
12. Y. M. El-Sayed, “Designing desalination systems for higher productivity”, Desalination, Volume 134, Issues 1-3, pp. 129-158, 2001..
13. Derek Dunn-Rankin, Elisângela Martins Leal, David C. Walther, “Personal power systems”, Progress in Energy and Combustion Science, Volume 31, Issues 5-6, pp. 422-465, 2005.
14. L. A. M. Endres, S. V. Möller, “On the fluctuating wall pressure field in tube banks”, Nuclear Engineering and Design, Volume 203, Issue 1, pp. 13-26, 2001.
15. C. Sak, R. Liu, D.S.-K. Ting, G.W. Rankin, “The role of turbulence length scale and turbulence intensity on forced convection from a heated horizontal circular cylinder”, Experimental Thermal and Fluid Science, Volume 31, Issue 4, pp. 279-289, 2007.
16. Xuejun Zhu, Shichao Ye, Xiaoheng Pan, “The local heat transfer mathematical model between vibrated fluidized beds and horizontal tubes”, Experimental Thermal and Fluid Science, Volume 32, Issue 6, pp. 1279-1286, 2008..
Design of roots blower with two-blade circular impeller
Fu-Shou Wang 1 , Wei-Ya Chen
2 , Wei-Fang Chen
Far East University 2 Department of Mechanical Engineering,
: C07-040
De Lin Institute of Technology Email: wfchen@cc.feu.edu.tw
NSC Project No. NSC 98-2622-E-269-031-CC3
Abstract Roots blower is important industrial equipment,
which is widely applied in the industry domain for each kind of fluid transfer. The impeller is the most essential part of Roots blower, and its design, manufacture and quality will affect the operating performance of Roots blower directly. The design of blade rotors profiles will directly affect the performance of Roots blower. It is very important to design and define rotor's profile in the design of Roots blower. Roots blower impellers have three blade profiles, which are circular profiles, involute profiles and cycloid profiles. This plan firstly analyzes and researches the equation of the three blade profiles, and select radial distances and axial distance ratios. Theoretically analysis will be made through the calculation of area utilization factors.
The paper will analyze and design the roots blower with two-blade circular impeller, and will use the technology of dynamic meshing and the theoretical analysis to set up roots blower with two-blade circular impeller of profile equations. Using dynamic graphical simulation technology, the parametric design flow of impeller is established.
Keywords: Roots blower, impeller