4 ndt method
Post on 11-Nov-2014
44 Views
Preview:
TRANSCRIPT
Non-Destructive Testing
3/18/2013 NDT Course
CÁC PHƯƠNG PHÁP KIỂM TRA NDT - NDT METHODS
Non-Destructive Testing
3/18/2013 NDT Course
- Kiểm tra siêu âm - Ultrasonic Inspection- Kiểm tra từ tính - Magnetic Particle Inspection- Kiểm tra chụp ảnh phóng xạ-Radiography- Kiểm tra thẩm thấu-Dye Penetrant Inspection
Phương pháp kiểm tra không phá hủy dự án Pvshipyard -NDT methods in Pvshipyard
Non-Destructive Testing
3/18/2013 NDT Course
- Ultrasonic Inspection- Magnetic Particle Inspection- Radiography- Dye Penetrant Inspection
NDT methods in Pvshipyard
Non-Destructive Testing
3/18/2013 NDT Course
Kiểm tra siêu âm- Ultrasonic Inspection
Non-Destructive Testing
3/18/2013 NDT Course
Các loại hoạt động-Type of operation:
Ultrasonic Inspection
• Thủ công-Manual
• Tự động hóa -Automatic
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic InspectionVề thiết bị - Equipment:• Bao gồm, máy phát xung, sóng, đầu dò, dây cáp,mẫu
chuẩn… (Main unit comprising pulse generator, display oscilloscope / screen , probe)
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic InspectionVề thiết bị - Equipment:
• Máy phát xung- Main unit comprising pulse generator
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic InspectionVề thiết bị- Equipment:
• Quét theo mặt phẳng-Plan-view scan
• Quét theo chiều dày - Thickness scan
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic Inspection
• Hệ thống quét tự động - Rotoscan system - for pipeline inspection
Về thiết bị - Equipment:
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic InspectionVề thiết bị - Equipment:
• Hệ thống quét tự động - Rotoscan system - for pipeline inspection
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic InspectionNguyên lý - Principle: sóng âm là dạng sóng cơ học
• Sóng âm phát ra từ đầu dò và lan truyền vào vật liệu (The sound is emitted from probe and propagates into material).
• Đầu dò nhận phản xạ sóng âm sau khi khoảng thời gian lan truyền (Probe receives reflected sound after a period).
• Tín hiệu xuất hiện trên màn hình tại khoảng cách sóng âm phản xạ (The signal appears on screen at distance that relate to the period).
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic InspectionVật liệu- Material:
• Kim loại- Most metal except those with coarse or varying grain structure
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic InspectionVật liệu- Material:
• Cấu trúc hạt mịn- Fine grain • Hạt thô- Coarse grain
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic InspectionMaterial:
• Hạt mịn - Fine grain • Hạt thô- Coarse grain
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic Inspection
Ứng dụng điển hình trong công việc hàn-Typical
welding applications :• Hầu như tất mối hàn kết cấu - Almost welds in structure.
• Mối hàn ống công nghệ, đường ống pipeline -Welds joint of piping, pipeline.
Giới hạn kích thước -Weld-size limitations (PVMS’s procedures):
• Structure -Plate: thk. 8-200mm (theo tiêu chuẩn AWS D1.1) .
• Pipe: Dia. >168 and thk. >8mm
Non-Destructive Testing
3/18/2013 NDT Course
Ultrasonic Inspection
Ưu điểm - Advantages:
• Đưa ra được kết quả trực tiếp -Immediate presentation of
results.• Không cần thiết phải sơ tán con người tại nơi
làm việc -Not necessary to evacuate personnel.
Giới hạn-Limitations:
• Xác định vị trí độ sâu khuyết tật- Depth location of defects.
• Phương pháp UT thủ công không cho diễn tả kết
quả bằng hình ảnh - No pictorial record.
• Kỹ thuật viên cần phải được đào tạo chuyên môn và
có kỹ năng -Trained and skilled operator needed.
Non-Destructive Testing
3/18/2013 NDT Course
- Ultrasonic Inspection- Magnetic Particle Inspection- Radiography- Dye Penetrant Inspection
NDT methods in VSP
Non-Destructive Testing
3/18/2013 NDT Course
MAGNETIC PARTICLE
INSPECTION (MPI)
Non-Destructive Testing
3/18/2013 NDT Course
Các hoạt động: Type of operation:
MPI
• Thủ công: Manual
• Tự động: Mechanized
Non-Destructive Testing
3/18/2013 NDT Course
Nguyên lý - Principle:
MPI
• Kiểm tra bề mặt vật liệu bằng từ hóa- Magnetized the
surface to be test.
N S
Non-Destructive Testing
3/18/2013 NDT Course
Nguyên lý - Principle:
MPI
• BLT ở trên hoăc gần bề mặt làm đứt ngang từ trường -Discontinuity on or near the surface disrupt the magnetic field ( trừ khi chúng song song với nhau-unless they are parallel to it)
N S
• Các hạt từ lỏng linh động tập trung xung quanh BLT -A magnetic particle fluid suspension is applied which concentrates around the defects.
Non-Destructive Testing
3/18/2013 NDT Course
Nguyên lý-Principle (Mechanized) :
MPI
Non-Destructive Testing
3/18/2013 NDT Course
Thiết bị: Equipment (Mechanized) :
MPI Non-Destructive Testing
3/18/2013 NDT Course
Kiểm tra - Inspection
MPI
Non-Destructive Testing
3/18/2013 NDT Course
Kiểm tra-Inspection
MPI
• Huỳnh quang dưới ánh sáng cực tím- Fluorescent under ultra-violet lamp
• Sơn tương phản-Contrast paint
Non-Destructive Testing
3/18/2013 NDT Course
Inspection
MPI
Non-Destructive Testing
3/18/2013 NDT Course
Thiết bị và vật tư-Equipment consumable:
• Dạng cầm tay hoặc cố định-Portable or fixed installation• Tiếp xúc hoặc cuộn dây-Contacts or coil
MPI
• Sơn tương phản, bột từ- contrast paint and magnetic
Non-Destructive Testing
3/18/2013 NDT Course
MPI
Vật liệu kiểm tra-Material:
• Là vật liệu sắt từ và một số hợp kim nickel-Magnetic materials only - ferric steels and some nickel alloys.
Khả năng phát hiện-Ability detection:
• KT bề mặt nhỏ nhất có chiều rộng 0.025mm-Minimum defect size 0.025mm wide at surface.
Non-Destructive Testing
3/18/2013 NDT Course
MPI
Ứng dụng điển hình- Typical welding applications :
• Kiểm tra chi tiết kết cấu hàn- Rapid inspection of welded structural details.
• Kiểm tra những bộ phận nhỏ- Production rate inspection of
small components.
Non-Destructive Testing
3/18/2013 NDT Course
MPI
Ưu điểm-Advantages:
• Xác định trực tiếp vị trí của BLT -Direct indication of defect location.
Limitations:
• Phát hiện một vài BLT gần bề mặtnhưng độ nhạy thấp- Some indication of sub-surface defects but of low sensitivity.
• Không sử dụng đối với vật liệu không sắt từ.
• Not critically dependent on surface condition.
Non-Destructive Testing
3/18/2013 NDT Course
- Ultrasonic Inspection- Magnetic Particle Inspection- Radiography- Dye Penetrant Inspection
NDT methods in Shipyard
Non-Destructive Testing
3/18/2013 NDT Course
RADIOGRAPHY
RDBH – JRP. ROMBOUTRD-09-2001-R-PL-03
J12OS – W138-45605-11-03
0 5 10 15 20 25 30
DIN 10 Fe
Non-Destructive Testing
3/18/2013 NDT Course
Nguồn gamma - Gamma Radiography
RADIOGRAPHY
Máy phát tia x-ray-X-
ray Radiography
Non-Destructive Testing
3/18/2013 NDT Course
Các loại hoạt động - Type of operation:
Gamma
RADIOGRAPHY
• Trạng thái tĩnh - Static
• Cơ giới hóa-development may be mechanized
Non-Destructive Testing
3/18/2013 NDT Course
Type of operation:
X-Ray
RADIOGRAPHY
• Tĩnh - Static
• Có thể vận chuyển được-transportable
Non-Destructive Testing
3/18/2013 NDT Course
Các loại hoạt động-Type of operation:
X-RayGamma
RADIOGRAPHY
• Static
• development may be mechanized
• Static
• transportable
Non-Destructive Testing
3/18/2013 NDT Course
Thiết bị-Equipment
RADIOGRAPHY Non-Destructive Testing
3/18/2013 NDT Course
Nguyên lý
Principle:
RADIOGRAPHY • Bức xạ bị hấp thụ bởi vật liệu, nó mang năng lượng và suy
yếu dần khi nó xuyên qua vật liệu-The radiation is absorbed by material, so it’s energy is declined after across material.
• Độ đen của film được thể hiện lượng bức xạ xuyên qua-Film
density is presents the across radiation.
Non-Destructive Testing
3/18/2013 NDT Course
Principle:RADIOGRAPHY
Non-Destructive Testing
3/18/2013 NDT Course
Các thông số hoạt động-Operating parameters:
X-RayGamma
RADIOGRAPHY
• Bước sóng bức xạ-Wavelength of radiation 0.001 - 0.015 nm
0.01 - 1 nm (1.25MeV - 80KeV)
• Dễ sách theo-Portability good (except for container)
• Dễ tiếp cận-Access good
• Thời gian chiếu -Exposure time 1 second - 24 hours
• Phạm vi chiều dày chụp được đến 250mm-Thickness range up to 250 mm
• Kích thước nhỏ nhất-Minimum defect size 1% of thickness
• Hiệu điện thế- Tube voltage 10 - 500 kV
• Dòng điện-Tube current 10 - 250 mA
• Năng lượng tiêu thụ-Power consumption 1 - 10 kW
• Không thuận lợi sách theo-Portability fair
• Khó tiếp cận - Access fair
• Thời gian chiếu- Exposure time1 sec - 10 min
• Phạm vi chiều dày đến 100mm -Thickness range up to 100 mm
• Minimum defect size0.1% of thickness X
Non-Destructive Testing
3/18/2013 NDT Course
Các kỹ thuật chụp APX- RT techniques:
• Tường đôi ảnh đơn - DWSI (Double wall single image)
RADIOGRAPHY
EXAMPLE RADIOGRAPHIC
Non-Destructive Testing
3/18/2013 Welding Inspector Course
Các kỹ thuật chụp APX-RT techniques:
• Tường đơn ảnh đơn - SWSI (Single wall single image)
RADIOGRAPHY
EXAMPLE RADIOGRAPHIC
Non-Destructive Testing
3/18/2013 Welding Inspector Course
RT techniques:
• Tường đôi ảnh đôi - DWDI (Double wall double image)
RADIOGRAPHY Non-Destructive Testing
3/18/2013 Welding Inspector Course
Các kỹ thuật chụp APX-RT techniques:
• Panoramic - Put the source into center of pipe
RADIOGRAPHY
EXAMPLE RADIOGRAPHIC
Non-Destructive Testing
3/18/2013 NDT Course
Phòng tối, quá trình rửa phim-Dark room - Processing:
• Sau thời gian chiếu, phim sẽ được sử lý trong phòng tối-After exposure, the film will be processing in dark room…
RADIOGRAPHY Non-Destructive Testing
3/18/2013 NDT Course
Interpretation:
RADIOGRAPHY
Non-Destructive Testing
3/18/2013 NDT Course
Vật liệu-Material:
• Tất cả vật liệu nào hàn được thì có thể kiểm tra được-Most weldable materials may be inspected.
Các ứng dụng-Typical welding applications:
• Kiểm tra ngoài công trường-Site inspection.
RADIOGRAPHY
• Bình áp lực-Pressure vessels
• Các đường ống ngầm -Pipelines
Non-Destructive Testing
3/18/2013 NDT Course
Các ứng dụng-Typical welding applications:
RADIOGRAPHY
Non-Destructive Testing
3/18/2013 NDT Course
Ưu điểm-Advantages:
Giới hạn-Limitations:
RADIOGRAPHY
• Kết quả chính xác bằng hình ảnh-Accurate pictorial presentation of results.
• Lưu giữ hồ sơ lâu dài-Radiographs may be kept as a permanent record.
• Không hạn chế công việc hàn-Not confined to welds.
• Kỹ thuật viên phải biết rõ ràng về khu vực trong thời gian chiếu
phóng xạ-Personnel must be clear of area during exposure.• KT nứt và không ngấu có hướng song song với phim sẽ không
thể hiện trên phim sau khi phim được chụp-Cracks or lack of fusion parallel to film may not show up.
• Giá cả đắt-Film expensive.
Non-Destructive Testing
3/18/2013 NDT Course
Các vật tư-Consumables:
RADIOGRAPHY
• Phim-Film.• Quy trình sử lý bằng hóa
chất-Processing chemicals.
• Nước-Water.
• Đồng vị được thay thế-Isotope replacements - for gamma
radiography.
Non-Destructive Testing
3/18/2013 Welding Inspector Course
PHOÙNG XAÏ IITeân nhaân PX:Hoaït ñoä:
TI
7
Về an toàn-Radiation Safety:
RADIOGRAPHY
• Yêu cầu nghiêm nghặt về phóng xạ đối với con người-Cumulative radiation risk to personnel requires stringent precautions.
Non-Destructive Testing
3/18/2013 NDT Course
Safety:
RADIOGRAPHY
• Máy đo liều cá nhân-
Pocket Dosimeter.
• Dụng cụ đo bức xạ-Serveymeter.
Non-Destructive Testing
3/18/2013 NDT Course
PHOÙNG XAÏ IITeân nhaân PX:Hoaït ñoä:
TI
7
An toàn bức xạ-Radiation Safety:
RADIOGRAPHY
• Luôn luôn đưa ra bảng hiệu an toàn phóng xạ lên thiết bị hoặc tại nơi làm việc-Always put radiation sign on equipment or at working area.
Non-Destructive Testing
3/18/2013 NDT Course
- Ultrasonic Inspection- Magnetic Particle Inspection- Radiography- Dye Penetrant Inspection
NDT methods in Shipyard
Non-Destructive Testing
3/18/2013 NDT Course
DYE PENETRANT INSPECTION
Non-Destructive Testing
3/18/2013 NDT Course
Loại hoạt động-Type of operation:
PENETRANT
• Bằng thủ công-Manual
• Cơ giới hóa-Mechanized
Non-Destructive Testing
3/18/2013 Welding Inspector Course
Nguyên lý-Principle:
• Áp chất thấm lên bề mặt vật liệu-A special dye is applied to the surface .
• Sau đó lau sạch bề mặt-Surface is cleaned
PENETRANT
• Áp chất hiện lên -Applying a white powder developer
• Quan sát chỉ thị hiện lên bề mặt-The dye is absorbed producing a color indication on surface
Non-Destructive Testing
3/18/2013 Welding Inspector Course
Quy trình thử-Testing Procedure:
• Trước khi gia nhiệt-Before
treatment. • Làm sạch bề mặt-Pre-clean with
cleaner
• Áp chất thấm-Apply penetrant
PENETRANT
Non-Destructive Testing
3/18/2013 Welding Inspector Course
Quy trình thử-Testing Procedure:
• chùi sạch chất thấm bằng rẻ sạch, giấy-Remove penetrant by wiping with cloth...
• Và dung môi để làm sạch… and solvent wipe using cleaner
PENETRANT Non-Destructive Testing
3/18/2013 Welding Inspector Course
Quy trình thử-Testing Procedure:
• Áp chất hiện-Apply developer
• Quan sát và đánh giá-obsorbed and evaluation
PENETRANT
Non-Destructive Testing
3/18/2013 Welding Inspector Course
Vật liệu-Material:
• Mọi vật liệu không sốp-Any - non porous.
Khả năng phát hiện-Ability detection:
• Nhỏ nhất có chiều rộng 0.025mm,Minimum defect size 0.025mm wide
PENETRANT Non-Destructive Testing
3/18/2013 Welding Inspector Course
Các ứng dụng-Typical welding applications :
• Đường hàn chân ống đối đầu-Root runs in pipe butt welds.
• Kiểm tra khe hở các đường hàn container-Leak paths in containers.
PENETRANT
Non-Destructive Testing
3/18/2013 NDT in course
Ưu điểm-Advantages:
• Giá thấp-Low cost.
• Quan sát trực tiếp vị trí tín hiệu KT Direct indication of defect location.
Giới hạn-Limitations:
• Chỉ phát hiện KT mở ra trên bề mặt- OpenSurface defects only detected.
• Bề mặt gồ ghề, sù xì có thể cho tín hiệu sai-Rough welds produce spurious indications.
PENETRANT
top related