ce3511 electronic circuits lab l… · • always make sure that all lab equipment, soldering...

CE3511 ELECTRONIC CIRCUITS LAB

Kingdom of Saudi Arabia

Ministry of Education

Prince Sattam Bin Abdulaziz University College of Computer Engineering & Sciences

Department of Computer Engineering

الصعوديةاململكة العربية

وزارة التعليم

جامعة األمري شطام بن عبدالعسيس

كلية هندشة وعلوم احلاشب

قصم هندشة احلاشب

Laboratory Safety Basic Student Guidelines

Please read these Safety Guidelines, complete and sign the last page and give it to your instructor.

Safety is a priority at Prince Sattam Bin Abdulaziz University .While it may seem unlikely that an

accident could happen to you, you should know the accident rate in universities is 10 to 100 times

greater than in the chemical industry. To help prevent accidents, safety notes are included in the

lab manual. In addition, any relevant Material Safety Data Sheets (MSDS) are posted in a

laboratory binder and guidelines.

Pay close attention to this information – our goals are:

1. To avoid accidents in the lab, and

2. To respond promptly and appropriately should an accident occur.

Safety depends on you!

It is your responsibility to follow the instructions in the lab manual and any additional guidelines

provided by your instructor. It is also your responsibility to be familiar with the location and

operation of safety equipment such as eyewash units, showers, fire extinguishers, chemical spill

cleanup kits etc.

General Laboratory Safety Guidelines

• Wear appropriate protective clothing. Do not wear open-toed shoes, sandals, shorts or shirts

with dangling sleeves. Tie back long hair and avoid dangling jewelry.

• Clean your workstation after each lab period, and return all equipment and materials

to appropriate stations before leaving the lab.

• Always turn off the power before working on any electric circuit or electronic device. • When operating with electric circuits and electronic devices other than just a computer, you

must work in pairs or teams.

• When in doubt about the operation of any circuit or device in lab, always have an instructor

check your work before connecting power to your system.

• Report any safety issues or violations that you are aware of as soon as possible to your

course instructor and program director.

• Ensure that you have a safe buffer area around you and that you are working on an

appropriate surface when using soldering irons in the lab.

• Always make sure that all lab equipment, soldering irons, project circuits are powered

down before leaving your lab area.

• Ensure that your work environment is clear and free of debris before starting your work AND

after finishing your project.

• Never block walkways in the laboratory with lab equipment, cables, and electrical power cords.

• Do not eat, drink, smoke, or apply cosmetics in the laboratory.

• Avoid all horseplay in the laboratory. • Dispose of sharps waste properly — place broken glass in the glass discard container, metal in

the metal waste container, and place other waste materials in the designated container(s).

Secure all sharps, including needles, blades, probes, knives, etc.

Laboratory Experiments

Lab Manual – CE-3510 –Experiments

1.

Contents:

Experiment 1:

Rectifier Diodes

1.1 Experiment 1: Effect of the P-N Junction in Diodes

1.2 Experiment 1: Characteristic Curves for Diodes of different

2.1

Experiment 2:

semiconductor materials

Half-wave rectifier circuit M1

2.2 Experiment 2: Bridge rectifier circuit B2

3. Experiment 3: Diodes with special Properties (LEDs)

4. Experiment 4: Bipolar Transistors

5. Experiment 5: Characteristics of the Bipolar Transistor

6. Experiment 6: Unipolar Transistors (Junction Field –Effect Transistors)

7. Experiment 7: MOSFET (IGFET)

8. Experiment 8: Thyristors (DIAC, TRIAC)

9. Experiment 9: Amplifier Circuits

10. Experiment 10: Power Supply Circuits

11. Experiment 11: Power Electronics Circuits

12. Experiment 12: Operational Amplifier

--------------------------------------------------

Assessment scheme:

Weekly practical Experiments will be used to gain the skills stated in the learning outcomes.

EXAM I AND II 40% 9

th & 13

th week

Quizzes 20% 8 & 12th weeks

F inal Exam (theoretical & Practical) 40% in the 14th

& 15th

Week

Learning materials: – Essential

Robert Bolysted, Electronic Devices and Circuit Theory, 8th

Edition, Prentice Hall Millman & Halkies Electronic Devices and circuits, Macgra Hill Floyd Fundamentals of Electronics and its application, Pearson education

J.D. Ryder, Fundamentals of Electronics and its application, Prince Hall

Summaries for each experiment subject, which are going to be available in

(Alishraaq Algamiee Bookshop – in Al-Kharj)

--------------------------------------------------

EC Lab

1. Experiment 1: Rectifier Diodes

7

8

EC Lab

EC Lab

2. Experiment 2: Half-wave rectifier circuit M1

EC Lab

EC Lab

EC Lab

EC Lab

3. Experiment 3: Diodes with special Properties (LEDs)

18

4. Experiment 4: Bipolar Transistors

EC Lab

EC Lab

EC Lab

23

EC Lab

24

EC Lab

25

EC Lab

26

27

5. Experiment 5: Characteristics of the Bipolar Transistor

EC Lab

EC Lab

EC Lab

EC Lab

EC Lab

EC Lab

EC Lab

EC Lab

Experiment 6: Unipolar Transistors (Junction Field –Effect Transistors)

EC Lab

EC Lab

EC Lab

EC Lab

42

EC Lab

43

EC Lab

44

EC Lab

45

EC Lab

46

EC Lab

47

EC Lab

48

7. Experiment 7: MOSFET (IGFET)

EC Lab

51

EC Lab

52

EC Lab

54

EC Lab

55

EC Lab

56

EC Lab

57

EC Lab

58

8. Experiment 8: Thyristors (DIAC, TRIAC)

EC Lab

61

EC Lab

62

EC Lab

64

EC Lab

65

EC Lab

66

EC Lab

69

EC Lab

70

EC Lab

71

EC Lab

72

EC Lab

73

----------------------------------------

EC Lab

9. Experiment 9: Amplifier Circuits

EC Lab

EC Lab

EC Lab

78

EC Lab

10. Experiment 10: Power Supply Circuits

EC Lab

81

EC Lab

82

EC Lab

83

EC Lab

84

EC Lab

85

EC Lab

86

EC Lab

87

----------------------------------

11. Experiment 11: Power Electronics Circuits

90

EC Lab

------------------------------------------

83

12. Experiment 12: Operational Amplifier

7.5.1

84

85