calipers & height gauges
DESCRIPTION
me Exp. 1TRANSCRIPT
Exp.1: Calipers
Calipers & Height Gauges Exp # 1To be acquainted with different tools that may be used to obtain small-scale linear measurements (length, depth, diameter, thickness, etc.)
To become familiar with calipers.
To become familiar with height gauges.
OBJECTIVESCaliper is an instrument with two legs used for measuring linear dimensions. Calipers
Caliper Parts Inside caliperOutside caliperDivider caliperOdd leg caliperVernier Caliper Digital Caliper Dial Caliper Depth caliper Types of CalipersInside caliper
Outside caliper
Divider caliper
Odd leg caliper
Vernier Caliper
Digital Caliper
Dial caliper
Depth caliper
Vernier Caliper Reading
Digital Caliper Reading
5 mm + 0.11 mm = 5.11mm
Dial Caliper Reading
A height gauge is a measuring device used either for determining the height of something, or for repetitious marking of items to be worked on.
It used in metalworking or metrology to set or measure vertical distances and also it measures the height of an object.
HEIGHT GAUGESVernier Height Gauge.
Digital Height Gauge.
Dial Height Gauge.
TYPES OF HEIGHT GAUGES VERNIER HEIGHT GAUGE
Dial HEIGHT GAUGE
Digital HEIGHT GAUGE
Using veriner, and dial calipers, measure the dimensions of your part. Procedures for using veriner caliper Check that the vernier caliper correctly reads zero when the jaws are closed.Close the jaws around the object but do not over tighten. When both locking screws are tightened the caliper can be removed from the object and read without worrying if the jaws will shift position.You can read the main scale . Note the number of divisions on the Vernier plate from its zero mark to a line which exactly coincides with a line on the fixed bar.Procedures for using Dial caliper The same as veriner caliper except using dial indicator for reading divisions rather than veriner scale.ProcedureResults