camedia c 3000 engl

8/8/2019 Camedia c 3000 Engl

1/86


2/86

152

You can play movies you have recorded. will appear on the LCDmonitor for movies.

Set the Mode dial to . The LCD monitor turns on

automatically.

Display a picture with onthe LCD monitor using the

Jog dial. Picture information is displayed

for 5 seconds. Press the Eraseor Menu button to display thepicture information again.

Press the Menu button todisplay the Menu.

Press the top/bottom arrowson the Jog dial to selectMOVIE PLAY. To cancel, press the Menu

button.

Press the right arrow on theJog dial to select START.

Press the OK button to startthe movie. The card access lamp blinks

for a moment, then the moviestarts.

6

5

4

3

2

1P A / S / MO F F

P O W E R / M O

D ED

I A L

PLAYING MOVIES

MOVIEPLAY

CARDSETUP

START

[ 1 / 1 ] 2 4MODESETUP

FUNCTION

INFO

3

542 1

6


3/86

153

Press the OK button duringthe movie to pause it. Press itagain to restart. The following operations can

be performed during pause.Press the top arrow on the Jogdial to pause at the beginningof the movie. Press the bottomarrow to pause at the ending ofthe movie.Press the right arrow on theJog dial to start the movie.Press the left arrow to play itbackwards.

Press the Menu button whenmovie playback is finished.The Menu reappears. Press itagain to exit the Menu.

8

7

12.23.00 21:56 24

HQ

Note:

Sound cannot be played back by this camera. Connect it to a TV orpersonal computer for sound playback.(p. 124)

87


4/86

154

PICTURE INFORMATIONYou can display picture information (settings, date/time, file number, etc.)on the LCD monitor.

Set the Mode dial to .


Press the top/bottom arrowsto select INFO. To cancel, press the Menu

button.

Press the right arrow on theJog dial, then press the

top/bottom arrows to selectON.

Press the left arrow on theJog dial to confirm the setting.

Press the OK button to savethe setting and cancel theMenu.

6

5

4

3

2

1P A / S / MO F F

P O W E R / M O

D ED

I A L

[ 1 / 1 ] 2 4

MOVIEPLAY

CARDSETUPMODESETUP

FUNCTION

INFO OFFON

2

543 1

6


5/86

155

HQSIZE: 320 240

0" / 100"12.23. ,00 21:56

Sound record

Protect

Movie pictureBattery check

Recording modeImage size

White balance

Date/TimeSeconds

During movie recording

FILE: 123-3456

Movie pictureBattery check

File name

When a movie picture is selected

Note: When picture information is displayed, the frame number will not be

displayed. Unless OFF is selected in All Reset, the setting will be canceled when the

power is turned off. (p. 194) The information is displayed for a period of 5 seconds.


6/86

156

FUNCTIONSThese functions enable you to create an index of recorded images and toedit images.

CREATING AN INDEXRecorded movies can be displayed as an index. After an index iscreated, it can be saved on the card as a still picture image.


Using the Jog dial, display an

image with the mark onthe LCD monitor.


Press the top/bottom arrowson the Jog dial to selectFUNCTION.

After pressing the right arrowon the Jog dial, press thetop/bottom arrows to selectMOVIE INDEX, then press theOK button.

Press the right/left arrows onthe Jog dial to select the firstframe for the index display,then press the OK button. If the top arrow on the Jog dial

is pressed, the first frame isdisplayed, and if the bottomarrow is pressed, the lastframe is displayed. When thefirst frame is selected, thedisplayed images other thanthe last frame will changeaccordingly.

6

5

4

3

2

1P A / S / MO F F

P O W E R / M O

D ED

I A L

[ 1 / 1 ] 2 4

MOVIEPLAY

CARDSETUPMODESETUP

FUNCTION

INFO

MOVIEINDEXMOVIEEDIT

3

765

42

1

8


7/86

157

The total movie time and timeof the current frame willappear in the left corner on the

LCD monitor. To go to the next frame, pressthe right arrow on the jog dialand to go the previous frame,press the left arrow.

Press the right/left arrows onthe Jog dial to select the lastframe for the index display. Just as when the first frame is

selected, the image can beselected by using the Jog dial.When the last frame isselected, the displayed imagesother than the top frame willchange accordingly.

Press the Menu button to go toback to first frame selection.

Press the OK button to recordthe index image in the cardand cancel the Menu. The index image wi l l be

recorded in the correspondingmode listed below.HQ [ SQ2 (1024 x 768/HIGH)SQ [ SQ2 (640 x 480/HIGH)

8

7CANCEL OK

0" / 88"

0" / 88"

CANCEL OK

Note: The index can be displayed in 9 frames only.


8/86

158

FUNCTIONS (Cont.)

EDITING A MOVIEThis function is used to delete unnecessary portions of recorded moviesor to split one movie into two.


Using the Jog dial, display animage with the mark on

the LCD monitor.


Press the top/bottom arrows

on the Jog dial to selectFUNCTION.

After pressing the right arrowon the Jog dial, press thetop/bottom arrows to selectMOVIE EDIT, then press theOK button.

5

4

3

2

1P A / S / MO F F

P O W E R / M O

D ED

I A L

[ 1 / 1 ] 2 4

MOVIEPLAY

CARDSETUPMODESETUP

FUNCTION

INFO

MOVIEINDEXMOVIEEDIT

3

876

542

1

9


9/86

159

Press the right/left arrows onthe Jog dial to select the first

frame, then press the OKbutton. If the top arrow on the Jog dial

is pressed, the first frame ofthe movie is displayed, and ifthe bottom arrow is pressed,the last frame is displayed.

Press the right/left arrows onthe Jog dial to select the lastframe, then press the OKbutton. Just as when selecting the top

frame, the top/bottom arrowson the Jog dial can be used toselect the frame.

Press the right/left arrows onthe Jog dial to select NEW orERASE. If NEW is selected, the edited

movie is saved as a newmovie with a different name.

If ERASE is selected, theedited movie is saved under

the original name. The originalmovie is discarded.

Press the OK button to recordthe movie and cancel theMenu.

9

8

7

60" / 88"

CANCEL OK

0" / 88"

CANCEL OK

NEW ERASE


10/86

160

CARD SETUP

ALL-FRAME ERASE


Display a picture with onthe LCD monitor using theJog dial.


Press the top/bottom arrowson the Jog dial to select CARDSETUP.

Press the right arrow on theJog dial, then press thetop/bottom arrows to select

.

Press the OK button to display.YES NO

6

5

4

3

2

1

1

76

542P

A / S / MO F F

P O W E R / M O

D ED

I A L

3

[ 1 / 1 ] 2 4

MOVIEPLAY

CARDSETUPMODESETUP

FUNCTION

INFO

YES NO


11/86

Press the OK button with YESselected to erase all the

pictures in the card. To cancel, select NO using theright arrow on the jog dial.

When complete, NO PICTUREappears on the LCD monitor. Protected frames will remain in

the card, and the last frame willbe displayed. (p. 112)

8

7

161

Caution: Be careful not to erase important picture data by mistake as it cannot

be retrieved. Never open the card cover, eject the card, remove the batteries, or pull

the plug while erasing pictures. It may destroy the data in the card.

When a write-protect adhesive seal is placed on the card, the cameradoes not enter the Erase mode.


12/86

CARD FORMATYou can format the card.


Display a picture with onthe LCD monitor using theJog dial.

.


Press the top/bottom arrowson the Jog dial to select CARDSETUP.

Press the right arrow on the

Jog dial, then press thetop/bottom arrows to select.

Press the OK button todisplay .

Press the OK button againwith YES selected to formatthe card. To cancel, select NO using the

right arrow on the Jog dial andpress the OK button.

When complete, NO PICTUREappears on the LCD monitor.

8

7

YES NO

6

5

4

3

2

1

162

CARD SETUP (Cont.)

1

76

542P

A / S / MO F F

P O W E R / M O

D ED

I A L

[ 1 / 1 ] 2 4

MOVIEPLAY

CARDSETUPMODESETUP

FUNCTION

INFO

3

YES NO


13/86

163

Note: Formatting the card erases the existing data, including pictures which

have been write-protected from the camera. Be careful not to eraseimportant data when formatting a recorded card.

Formatting will not be engaged when a write-protect adhesive seal isplaced on the card.

Non-Olympus brand cards or cards formatted from or used in a computermust be formatted by the camera. These cards may take longer to recordthan recommended Olympus brand cards.

It is highly recommended that you confirm the contents before formatting.


14/86

164


15/86

OL Y MP

U S D I GI T A L

C A M

E R A

4STORING DATA FORPRINTING PICTURES

Recorded images can be printed out with a printer. Selected images can be reserved in a SmartMedia

card for printing on a printer or at a photo lab thatsupports the DPOF (Digital Print Order Format)system.


16/86

166

ABOUT PRINT SETTINGSYou can make prints of images stored in a SmartMedia, using one of thefollowing methods:

1. Images in the SmartMedia can be selected for printing, as well as thenumber of copies for each and whether or not to print the date andtime with them. This information is saved in the card (Print-reserve)for later printing from a printer or at a photo lab that supports DPOF.

2. If a SmartMedia with Print-reserve data recorded in it is inserted intoan Olympus CAMEDIA P-330N/P-300 printer, printing can beperformed at the touch of a button. For more information, consult

your printers user manual.

3. Images can be transferred directly to a personal computer via USB ora PC connection kit, or by using an optional FlashPath, PC CardAdapter or USB SmartMedia Reader/Writer. Images can then beprinted on a printer connected to the personal computer using asofttware application. For more information, consult the softwaresuser manual.

About DPOFDPOF (Digital Print Order Format) is a system that allows you toselect images in a SmartMedia card to be printed as well as thenumber of copies to make of each. This information is stored in thecard for use by printers or photo labs that support this system tomake prints automatically.


17/86

167

Note: Images taken with this camera can also be printed using a printer or at a

photo lab that supports the Design rule for Camera File system/DCF. DPOF reservations set by another device cannot be changed by thiscamera. Make changes using the original device.

If a card contains DPOF reservations set by another device, enteringreservations using this camera may overwrite the previous reservations.

Even if an image appears with the message "PICTURE ERROR", printreserve may be performed on it. In such a case, the print reserve icon( ) does not appear on the screen where an image is displayed for fullview. Since appears on the screen where multiple images aredisplayed (index-display mode), it is possible to confirm the print reservestatus.

This camera cannot be directly connected to printers such as theOlympus P-300 digital printer.

Not all functions may be available on all printers or at all photo labs.


18/86

You can store data for making prints with a printer or at a lab thatsupports this system.

ALL-FRAME PRINT RESERVEYou can store data for printing all the pictures in the card as well aschoose the number of prints to make.


Press the Print button to

display the Print reservesetting screen. If Print-reserve data is already

stored in the card, a screenwill appear giving you thechoice of resetting the data orkeeping it. (p. 177)

Select using the Jog dial,then press the OK button. The print number and date

setting screen is displayed.

Press the top/bottom arrowson the Jog dial to select .

4

3

2

1

168

PRINT-RESERVE

1

2

8

76

543 P A / S / MO F F P

O W E R / M O D E

D I A L

CANCEL

PRINT ORDER

SET OK


19/86

Press the left/right arrows onthe Jog dial to enter thenumber. Press the left arrow to decrease

the number, and the right arrowto increase it.

The number of prints can beset from 0 to 10.


Press the left/right arrows onthe Jog dial to select DATE,TIME or NO.

Press the OK button. The Menu screen disappears

and the print reserve indicator

and the number of prints aredisplayed on the screen.

8

7

6

5

169

Note: The setting will remain until it is readjusted. If you are printing using the P-330N or P-330, only the first 255 images

can be printed. Print reserve may take considerable time in some cases.

: 1

: DATE TIME NO

CANCEL SET OK


20/86

SINGLE-FRAME PRINT RESERVEYou can store data for making prints with a printer or at a lab thatsupports this system.

Set the Mode dial to anddisplay a still picture.

Press the Print button todisplay the Print reserve

setting screen. If Print-reserve data is already

stored in the card, a screenwill appear giving you thechoice of resetting the data orkeeping it. (p. 177)

Press the top/bottom arrows

on the Jog dial to select ,then press the OK button. The Print reserve set ting

screen is displayed. If thezoom lever is pressed towardT, printing with trimming isavailable. (p. 174)

3

2

1

170

PRINT-RESERVE (Cont.)

1

6

CANCEL

PRINT ORDER

SET OK

P A / S / MO F F

P O W E R / M O

D ED

I A L

6543

2


21/86

Press the arrows on the Jogdial to select the image you

would like to print. Left arrow: Displays the imagein the previous frame.Right arrow: Displays theimage in the next frame.Top arrow: Displays the image10 frames back.Bottom arrow: Displays theimage 10 frames forward.

Press the Zoom lever towardW to display an index ofimages.Left arrow: Moves to theprevious frame.Right arrow: Moves to the nextframe.Top arrow: Displays theprevious page.Bottom arrow: Displays thenext page.The index is displayed asfollows: when the number offrames shown in the Index-Display mode (p. 211) is 4, 9or 16 frames, then 2, 6 or 12

frames are displayedrespectively.

Press the OK button todisplay the setting menu.


6

5

4

171

1234 1235 1236

1237 1238 1239

CANCEL SET OK

Print reserve selection screen

CANCEL SET OK

: 1

: DATE: YES

TIME NO

NO

HQ

6453

x10

CANCEL SET OK


22/86

172


Press the left/right arrows onthe Jog dial to enter the

number of prints. Press the lef t a rrow todecrease the number, and theright arrow to increase it.

The number of prints can beset from 0 to 10.

If the number of prints hasalready been set for theselected image, the previouslyset number is displayed.


Press the left/right arrows onthe Jog dial to select DATE,TIME or NO.


Press the left/right arrows onthe Jog dial to select YES orNO. If trimming is not set, YES

cannot be selected. Refer to Trimming Print

Reserve for setting trimming.(p. 174)

11

10

9

8

7P

A / S / MO F F

P O

W E R / M O D

ED

I A L

1110987

CANCEL SET OK

: 1

: DATE: YES

TIME NONO

CANCEL SET OK

: 1

: DATE: YES

TIME NO

NO


23/86

173

Note: Images taken with this camera can be printed using a printer or at a lab

that supports the Design rule for Camera File system/DCF. If you are printing using the P-330N or P-330, only the first 255 images

can be printed. Print reserve may take considerable time in some cases.

Press the OK button. The Menu screen disappears

and the print reserve indicatorand the number of prints aredisplayed on the screen.

To set print reserve for moreimages, repeat steps 4through 12.

Press the Print button to exit

the Print reserve mode andreturn to the Display mode.

13

12P A / S / MO F F

P O

W E R / M O D

ED

I A L

13

12


24/86

TRIMMING PRINT RESERVEYou can print an enlarged part of a recorded picture.

Select PRINT ORDER ,then press the OK button. ThePrint reserve selection screenappears. (p. 170)

Press the arrows on the Jogdial to display the image youwant to print. Left arrow: Displays the image

in the previous frame.Right arrow: Displays theimage in the next frame.Top arrow: Displays the image10 frames back.Bottom arrow: Displays theimage 10 frames forward.

Press the zoom lever toward Tto display the Trimming modescreen. The selected item is displayed

in green.

Move the cursor to set the topleft corner of the image you

would like to print. Move the cursor up and downby pressing the top/bottomarrows on the Jog dial, andmove it left and right bypressing the left/right arrows.

Press the zoom lever towardW to move the cursor to thetop left edge of the image, andpress it toward T to move it tothe bottom right edge.

4

3

2

1

174


3

1

P A / S / MO F F

P O W E R / M O

D ED

I A L

642

875

Trimming mode display

HQ

6453

x10

CANCEL SET OK


25/86

175

When the position is set,press the OK button.

Move the cursor to set thebottom right corner of theimage that you would like toprint. Use the same procedure as in

step 4. Press the Print button to go

back to the upper left corner

setting screen.

Press the OK button to set thetrimming size. The image isdisplayed on the LCD monitor.

Press the OK button again todisplay the Single-frame printreserve screen. Following the procedure for

Single-frame print reserve, setthe number of prints, date/time,and trimming. (p. 170)

If you would like to continue totrim other images, repeat theabove procedure from steps 1to 8.

8

7

6

5

OKCANCEL SET OK

Displayed for 1 second.

When the setting is finished, the

image and frame are displayed for1 second, then the PRINTORDER menu reappears.


26/86

176

PRINT-RESERVE (Cont.)Note: The size of the printed image will vary depending on the print reserve

settings. An image trimmed to a small size will have lower resolution. For best results with close-up prints, it is recommended to use the TIFF,

SHQ or HQ mode. The vertical to horizontal ratio in the trimming screen can be changed

using the Jog dial, but if the zoom lever is used, the ratio is fixed at 4:3.


27/86

177

RESETTING PRINT RESERVEThis resets all the print reserve settings for images saved in a card.

Set the Mode dial to anddisplay a still picture.

Press the Print button todisplay the Print order settingscreen. If there are no images in the

card, this screen is notdisplayed.

Press the left/right arrows onthe Jog dial to select RESET,then press the OK button. To keep the print order, select

KEEP and press the OKbutton.

To remove the selected imageonly, set the number of prints inSingle-frame print reserve to 0.

3

2

1

Note:

If RESET is selected, the print reserve will be canceled for all the imagesin the card.

PRINT ORDER SETTING

PRINT ORDERED

RESET KEEP

CANCEL SET OK

P A / S / MO F F

P O W E R / M O

D ED

I A L

13

2


28/86

178


29/86

5USING A

PERSONAL

COMPUTER

OL Y MP

U S D I GI T A L

C A M

E R A


30/86

180

COMPUTER SYSTEM REQUIREMENTSWhen using the provided utility software:Personal computers used with this camera must conform to the followingminimum standards.

To connect this camera directly to a personal computer, it must haveeither a serial port or USB port.

WindowsCPU: Pentium or laterOS: Windows 98/98 Second Edition/2000 Professional (USB)

Windows 95/98/98 Second Edition/2000 Professional/NT 4.0 SP3or later

Available HD space: 100MB or moreRAM: 32MB or more (64MB or more recommended)Connectors: USB port (USB connection)

RS-232C port (serial connection)D-SUB 9-pin connector (serial connection)

Monitor: Thousands of colors recommendedMinimum monitor resolution: 800 x 600 pixelsQuickTime 4.0 must be installed to play back movies.

Note: USB support is not available under the following environments, even for

PCs equipped with a USB port.Windows 98 upgrade (from Windows 95)Windows 95Windows NT 4.0

To record or play back sound, a sound card and a microphone arerequired.


31/86

181

INSTALLING PROVIDEDSOFTWARE

To take full advantage of a wide range of functions, including download,display, storage and panorama, your Olympus digital camera comes with

software applications and CAMEDIA Master. For installation andoperation, please refer to the softwares online documentation.QuickTime 4.0 must be installed on the computer to play back movies.

Apple MacintoshCPU: PowerPCOS: Mac OS 8.6 to 9 (USB)

Mac OS 7.6.1 to 9 (serial)Available HD space: 100MB or moreRAM: 32MB or more (8MB or more free memory for the included

application)Connectors: USB port

Serial portMonitor: Thousands of colors recommendedMinimum monitor resolution: 800 x 600 pixelsQuickTime 4.0 must be installed to play back movies.

Note: For USB connection, your Macintosh must have a USB port. To record sound, microphone is required.


32/86


33/86

183

USING A PERSONALCOMPUTER

Make sure that the power of the personal computer and thecamera are OFF.

Connect the provided USB cable or optional RS-232C PC serialcable to your computer. (See the previous page for details)

Remove the lens cap, and connect the cable to the camerasUSB connector or computer connector, then turn on yourcomputer.

Set the Mode dial on the camera to .

Start CAMEDIA Master on the computer.5

4

3

2

1

Note: If you are using a USB cable to make connections, make sure that your

personal computer support it. Contact your personal computer makerconcerning your personal computers environment.

Communications with a personal computer cannot be accomplished witha USB cable alone. Be sure to download images using CAMEDIA Master.

If a USB connection is used, make sure that USB is operating normally on

the personal computer. For more information, consult your personalcomputers operation manual.

USB connectorComputerconnector(RS-232C)


34/86

184

TRANSFERRING DATA FROMSmartMedia

PC CARD ADAPTERThe picture data in the SmartMedia canbe directly transferred to a personalcomputer equipped with a PC card(PCMCIA) slot or an external PC cardreader/writer, using the optional PC CardAdapter.

FlashPath FLOPPYDISK ADAPTERThe picture data in the SmartMedia canbe directly transferred to a personalcomputer equipped with a 3.5" FDD,using the optional FlashPath FloppydiskAdapter.

SmartMedia READER/WRITERThe picture data in the SmartMedia can be directly transferred to apersonal computer (Windows 98/Mac OS 8.6) equipped with a USB port,using the optional SmartMedia Reader/Writer (MAUSB-1).

Note: Check for compatibility. This equipment may not function properly on all

operating systems.

Do not use a SmartMedia with a write-protect adhesive seal on a computeras it will cause errors. (Refer to the instructions of the adapters.)


35/86

185

USING CAMEDIA Master

VIEWING IMAGES STORED IN THE CARDON YOUR COMPUTER

You can view images stored in a SmartMedia card via CAMEDIA Master.

Start CAMEDIA Master on thecomputer.

Click on [My Camera].

A thumbnail index of storedimages will be displayed.

3

2

1


36/86

186

USING CAMEDIA Master (Cont.)

Place the cursor on thedesired image and double-

click on it. This will open the selectedimage.

4

TRANSFERRING DATA USING CAMEDIAMaster

CAMEDIA Master transfers images stored in the card to your computer.

Start CAMEDIA Master on thecomputer.

Select [Camera] [DownloadAll Images] on the menu bar. The computer wi ll s tar t

transferring images from the

camera to the computer.

2

1

Note You can view images using software such as graphics applications that

support JPEG like Paint Shop Pro/Photoshop, Internet browsers like

Netscape Communicator/Microsoft Internet Explorer, and CAMEDIAMaster (supplied with the camera).


37/86

187

PROCESSING IMAGES USINGCAMEDIA Master

You can process images (changing tones, composing, and so on) usingthe provided CAMEDIA Master or other application software.

MAKING DARK IMAGES BRIGHTSome images may come out darker than expected. You can try takingpictures again right after shooting, but may often miss the right momentfor a good picture. This is where CAMEDIA Master Instant Fix comes in.You can easily brighten images.

Place the cursor on thedesired image and double-click on it. This will display the selected

image.

1


38/86

188

Select [Image] [Instant Fix]

on the menu bar. This will brighten the selected

image.

2

CORRECTING BLURRY IMAGESBacklight sometimes makes the whole image blurry, and an object whichstands before the subject may be out-of-focus. Use CAMEDIA MasterSharpen when this happens to sharpen the whole image. However, youshould note that it doesnt eliminate image blur completely.

PROCESSING IMAGES USINGCAMEDIA Master (Cont.)


39/86

189

Place the cursor on the imageyou want to correct anddouble-click on it. This will display the selected

image.

Select [Image] [Filter] [Sharpen] on the menu bar.

Specify the degree ofsharpness either by slidingthe slide bar or inputting avalue from 1 to 9, whilecomparing Original andNew.

When the desired result isobtained, click on [OK].

4

3

2

1


40/86

190

This will sharpen the selectedimage.

COMPOSING IMAGES WITH TEMPLATESYou can easily compose images with templates in CAMEDIA Master.

Place the cursor on the imageyou want to compose anddouble-click on it. This will display the selected

image.

1

PROCESSING IMAGES USINGCAMEDIA Master (Cont.)


41/86

191

Select [Image] [TemplateSuperimpose] on the menu

bar. This will display the composewindow.

Select a template and click on[Apply]. This will display the preview

image.

When you are happy with thesample image, click on [OK]. The composed image will be

displayed.

There are a lot of functions for editing images in additions to thosementioned here. See CAMEDIA Master users manual located in theCAMEDIA Master folder for information on all available functions.

4

3

2


42/86

192


43/86

OL Y MP

U S D I GI T A L

C A M

E R A

6CAMERA

SETTINGS The settings can be adjusted in the Menu. Each

Menu (still picture record menu, still picture displaymenu, movie picture record menu and movie picturedisplay menu) has different available settings. (p.73/114/137/151)


44/86

194

ALL RESETClears adjustments and returns to the default settings.

Set the Mode dial to P, A/S/Mor .


Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.

Press the OK button to displaythe Mode setting screen.

Press the top/bottom arrowson the Jog dial to select ALLRESET.

Press the right arrow on theJog dial, then press thetop/bottom arrows to selectON or OFF. When ON is selected, settings

will be canceled and reset tothe default when the power isturned off.

When OFF is selected, settingswill remain even when thepower is turned off.


Press the OK button to savethe setting. Press again tocancel the Menu.

8

7

6

5

4

3

2

1

(Still picture record menu)

1

84

7653

2

[ 1 / 3 ]

OFFON

CUSTOM

ALL RESET

TIFF

SQ1

SQ2

[ 3 / 3 ]

F2.8 1/800 + 2.0P

A/S/MMODE

CARDSETUP

MODESETUP SETUP

P O W E

R /

M O D

E D I A

L

P

A / S / M

O F F


45/86

195

Note: The setting will remain until it is readjusted.

With ON selected, the settings of the following items will becanceled and reset to the default when the power is turned off.

Aperture priority mode (p. 58),Shutter priority mode (p. 59),Manual mode (p. 61),Zoom (p. 62/133),Exposure compensation (p. 63/134),Flash modes (p. 64),Spot metering mode (p. 68),Macro mode (p. 69),

Macro + Spot metering mode (p. 70),Manual focus (p. 71/135),Sequence mode (p. 74),Selftimer/Remote control (p. 76/138),Auto bracket (p. 80),White balance (p. 82/142),ISO setting (p. 84/144),Flash correction (p .86),

Slow shutter synchronization flash (p. 88),Flash select (p. 92),Digital zoom mode (p. 96),Picture effects (p. 98/146),Sound record (p. 99)Recording mode (p. 105/149),A/S/M mode setting (p. 107),Picture information (p. 116/154),


46/86

When the power is turned off, the camera can revert to the settings thatyou desire. Even if the settings are changed while taking pictures, thecamera will return to the selected state when the power is turned on

again.





Press the top/bottom arrowson the Jog dial to select ALLRESET.

Press the right arrow on theJog dial, then press the top/bottom arrows to selectCUSTOM.

Press the right arrow on theJog dial to enter customsettings.

7

6

5

4

3

2

1

196

CUSTOM SETTINGS


4

76543

[ 1 / 3 ]

OFFON

CUSTOM

ALL RESET

TIFF

SQ1

SQ2

[ 3 / 3 ]

F2.8 1/800 + 2.0P

A/S/MMODE

CARDSETUP

MODESETUP SETUP

P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F

2

1


47/86

197

Press the top/bottom arrowson the Jog dial to select the

mode you would like to set.The modes that can beselected are shown in thetable on the following page.

Press the right arrow on theJog dial, then press the top/bottom arrows to select thedesired value.

Press the left arrow on theJog dial to confirm the setting. To enter more settings, repeat

steps 7, 8 and 9.

Press the OK button to exitfrom the Custom settings

screen and return to theMODE SETUP screen.

Confirm that CUSTOM isselected, then press the OKbutton to cancel MODE SETUP.Press it again to cancel theMenu. Even if the currentsettings are different from thecustom settings, the customsettings will be saved inmemory.

12

11

10

9

8


[ 1 / 5 ]

OFFAUTO

32mmF2.81/800

FLASHMODE

ZOOM

FNo

SHUTTER

/

11

121098 P O

W E R

/M

O D

E D I

A L

P

A / S / M

O F F


48/86

Flash Auto/Red-Eye Reducing/Fill-In/OffSpot/Macro Off/Spot/Macro/Spot + macro

Zoom position 32mm/50mm/70mm/96mmAperture value F2.8 ~ F11Shutter speed 1/800 ~ 16Exposure compensation 1/3 EV increments up to 2 EV.MF AF/MFMonitor (P) Off/OnDrive Single photo/Continuous photo/AF continuous photo/

Selftimer/Remote control/Auto bracketFlash exposure 1/3 EV increments up to 2 EVcompensation

Slow shutter Off/Before shutter/After shuttersynchronizing flashFlash select Main + extension/ExtensionDigital zoom Off/OnWhite balance Auto/Daylight/Overcast/Tungsten light/FluorescentISO Auto/100/200/400Function photography Off/Black and white/Sepia/White board/Black boardSound record Off/OnStill photo quality mode TIFF/SHQ/HQ/SQ1/SQ2Manual mode A/S/M

Movie image mode HQ/SQScreen information display Off/On

198

CUSTOM SETTINGS (Cont.)Items which can be set to the desired state in CUSTOM.


49/86

199






Press the right arrow on theJog dial, then press thetop/bottom arrows to selectNORMAL, SOFT or HARD.



8

7

6

5

4

3

2

1

SHARPNESSYou can select the image sharpness.



17653 P O W

E R

/M O

D E

D I A L

P

A / S / M

O F F

[ 3 / 3 ]

F2.8 1/800 + 2.0P

A/S/MMODE

CARDSETUPMODESETUP SETUP

[ 1 / 3 ]

HARDNORMAL

SOFT

ALL RESET

TIFF

SQ1

SQ2

284


50/86

200

TIFF SETTINGSThis sets the resolution for the TIFF mode.

Set the Mode dial to P orA/S/M.




Press the top/bottom arrowson the Jog dial to select TIFF.

Press the right arrow on theJog dial to select SETUP andpress OK button.

6

5

4

3

2

11

4

653

2

[ 1 / 3 ]

SETUP

ALL RESET

TIFF

SQ1

SQ2

[ 3 / 3 ]

F2.8 1/800 + 2.0P

A/S/MMODE


P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F


51/86

201

Use the top/bottom arrows onthe Jog dial to select the

resolution. 2048 x 1536, 1600 x 1200,1280 x 960, 1024 x 768 or 640x 480 are available.

The compression rate for allresolutions is uncompressedTIFF.

Press the OK button to returnto the Mode setting screen. Confirm the setting using the

image in the LCD monitor.


9

8

7

Note: The setting will remain until it is readjusted. The greater the number of pixels, the longer the playback time, and the

smaller the number of frames that can be photographed, so exercisecaution. (p. 42/43)

TIFF

1280 X 960

1600 X1200

1024 X 768

640 X 480

2048 X1536

98

7

P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F


52/86

202

SQ1, SQ2 SETTINGSYou can select the resolution and compression rate for SQ1 and SQ2.NORMAL quality allows more pictures to be stored in a card, while HIGHquality uses less compression, resulting in fewer visible artifacts in the

JPEG image.





Press the top/bottom arrowson the Jog dial to select SQ1or SQ2, then press right arrowon the Jog dial to selectSETUP.

Press the OK button to displaythe Resolution setting screen.

Press the top/bottom arrowson the Jog dial to select theresolution. The resolutions that can be

selected are shown in thefollowing table.

7

6

5

4

3

2

11

64

753

2

[ 1 / 3 ]

SETUP

ALL RESET

TIFF

SQ1

SQ2

[3 / 3

]

F2.8 1/800 + 2.0P

A/S/MMODE


P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F


53/86

Press the right arrow on theJog dial, then press the top/

bottom arrows to select HIGHor NORMAL.

Press the OK button to returnto the MODE SETUP screen. Confirm the setting using the

image in the LCD monitor.


10

9

8

NORMAL

HIGH (High quality)

NORMAL

HIGH (High quality)

203

Note: The setting will remain until it is readjusted. The greater the number of pixels, the longer the playback time, and the

smaller the number of frames that can be photographed, so exercisecaution. (p. 42/43)

SQ1

1280 X 960

1600 X1200

NORMALHIGH

Recording modeImage quality

SQ1

HIGH (High quality)NORMAL

HIGH (High quality)

NORMAL

SQ2

Recording size

1600 x 1200

1280 x 960

1024 x 768

640 x 480

File format

JPEG

109

8

P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F


54/86

204

BEEP SOUNDYou can select the volume of the operating beep sound.

Set the Mode dial to P, A/S/M,or .





Press the right arrow on theJog dial, then press thetop/bottom arrows to selectHIGH, LOW or OFF.



8

7

6

5

4

3

2

1



17653

2

[ 2 / 3 ]

REC VIEW

FULL-TIME AF

FILE NAME

OFFLOWON

[ 3 / 3 ]

F2.8 1/800 + 2.0P

A/S/MMODE


P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F

84


55/86

205

FULL-TIME AFFull-time AF keeps the image on the LCD monitor in focus at all timeswithout having to press the Shutter release button.




Press the OK button to displaythe MODE SETUP screen.

Press the top/bottom arrowson the Jog dial to select FULL-

TIME AF.

Press the right arrow on theJog dial, then press thetop/bottom arrows to selectON or OFF. ON: Always maintains focus

automatically.

OFF: Turns off Full-time AF.The camera wont focus untilyou press the Shutter releasebutton halfway.

6

5

4

3

2

1


1

653

2

[ 2 / 3 ]

OFFONREC VIEW

FULL-TIME AF

FILE NAME

[ 3 / 3 ]

F2.8 1/800 + 2.0P

A/S/MMODE

CARD

SETUPMODESETUP SETUP

P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F

4


56/86

206

FULL-TIME AF (Cont.)



8

7

Note: Using Full-time AF will drain the battery more quickly.

Full-time AF is not available when the LCD monitor is turned off. The setting will remain until it is readjusted.

7 P O W E R

/M

O D

E D I

A L

P

A / S / M

O F F

8


57/86

207

REC VIEWRec view lets you select whether to display the image after recording.Rec check lets you check the image and decide whether or not to save it.





Press the top/bottom arrowson the Jog dial to select REC

VIEW.

Press the right arrow on theJog dial, then press the top/bottom arrows to select ON,OFF or CHECK. When OFF is selected, the

image will not be displayed onthe LCD monitor after i t is

recorded. When ON is se lec ted , the

image will be displayed on theLCD monitor after i t isrecorded.

When CHECK is selected, theimage will be displayed after itis taken and a confirmationscreen will be displayed toallow you to keep or discard it.

6

5

4

3

2

1


1653

2

[ 3 / 3 ]

F2.8 1/800 + 2.0P

A/S/MMODE


P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F

4

[ 2 / 3 ]

OFFON

CHECK

REC VIEW

FULL-TIME AF

FILE NAME


58/86


59/86

209

Use the Jog dial to select animage.

Press the OK button to savethe image. The next image inmemory will appear. If sound is recorded with a still

image, it will be played afterthe OK button is pressed. Theimage will be stored in thecard after it is finished.

Press the Erase button todiscard the image. The One-Frame erase screen appears.

Press the left/right arrows onthe Jog dial to select YES,then press the OK button todiscard the image on the LCDmonitor. The next image willappear. To cancel, press the Erase

button or select NO using theleft/right arrows on the Jog dialand press the OK button. TheSave confirmation screen willreappear. If you turn off thecamera during CHECK, therest of the images will bestored in the card

automatically.

14

13

12

111411

P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F

1412

1413

[ ]YES NO


60/86

If Bracketing was used to take a picture, the index will appear asshown below.

If the memory only contains animage shot with Bracketing, all of itsframes will appear in the index.

210

REC VIEW (Cont.)

1235 1236 1237

OK

Image shot with Bracketing

Note: After recording a movie or taking a picture with Bracketing, you must

choose whether to save or discard it before you can record anotherimage.

Do not set CHECK in the TIFF mode. If you set it, the recording mode willbe changed to the HIGH (high quality) mode which has the same numberof pixels as it.

You can record images while the Save confirmation screen is displayed.Press the Shutter release button halfway to change to the recordingmode. The recording view with focus lock will appear on the LCD monitor.If no action is performed, the screen will automatically change back to theSave confirmation screen in 5 seconds.

If there are some images whose CHECK setting is not completed, it is notpossible to change or select the following menu settings when you recordagain with the Mode dial set to P or A/S/M. DRIVE, , , CARDSETUP and MODE SETUP.

You can set the Mode dial to P or A/S/M while the Save confirmationscreen is displayed. If you set the Mode dial to , all the images inmemory will be stored automatically in the card.

Never remove the card or batteries during CHECK. You will lose all of thedata in the memory.

You cannot display the Menu screen at the same time as the Saveconfirmation screen. The setting will remain until it is readjusted.


61/86

211

1000

1001 1002 1003

1003OK

Image shot with Bracketing(5 frames)

OK

Brightest

+ Com-pensation

Com-pensation

Normal

Darkest

1239 1240 1241

OK

Image shot with Bracketing(1 frame discarded)

Images shot with bracketing aredisplayed as shown on the left.

Image shot with normal images

1235 1237

OK

Note: If Bracketing was used to take a picture, you must choose whether to

save or discard it before you can record another image. Also refer to Note on page 209.

To display an image shot withBracketing, select the image andpress the OK button.

Press the OK button to save theselected image. To discard theimage, press the Erase button thenperform step 14 on page 209. It willdisappear from the screen.

Save or delete all images in memory.


62/86

212

FILE NUMBERYou can select the file numbering system for images transferred to apersonal computer. Files can be numbered from 0001 to 9999 andfolders can be numbered from 100 to 999.

ABOUT THE FILE NO. AND FOLDER NO.The file number and folder number used for each image are expressedas shown.

*Month: Jan. ~ Sep. = 1-9, Oct. = A, Nov. = B, Dec. = C

THE FILE NO. AND FOLDER NO. IN EACH MODE

RESET

When RESET is selected, the file number and folder number will be resetevery time a card is inserted in the camera.

AUTOWhen AUTO is selected, the same folder number and a continuingnumber from the last file number of the last card will be used, so that thesame file number will not be used for pictures taken together and savedin multiple cards.

\ D C I M \ * * * O L Y M P \ P m d d * * * * . j p g

Folder No.

100~999 Month (1~C)

File No.

0001~9999Day (01~31)

Folder No.102Card change

File No.0005

Folder No.100

File No.0001

Folder No.101Card change

File No.0005

Folder No.101File No.

starts from

0006


63/86

213

Set the Mode dial to P or

A/S/M.




4

3

2

11

4

3

2

[ 3 / 3 ]

F2.8 1/800 + 2.0P

A/S/MMODE


P O W E

R /M

O D

E D I

A L

P

A / S / M

O F F

Note: For convenience, the folder numbers remain the same when transferred

to a computer in both selections.

\ DCIM \ *** OLYMP \ Pmdd **** .jpg

Folder No.


64/86

214

Press the top/bottom arrowson the Jog dial to select FILE

NAME.

Press the right arrow on theJog dial, then press thetop/bottom arrows to selectRESET or AUTO. If you select RESET, the folder

and file numbers will be reseteach time a new card isinserted. If you select AUTO,the folder number used by thelast card will be kept, and thefile number will continue fromthe last one in the previouscard. File names will thereforenot be repeated, even if yourecord several pictures indifferent cards at one time.



8

7

6

5

Note: When a card with a file number larger than the last file number is used,

the file numbers will continue from the larger number. When the maximum file number (9999) is reached, the number of

storable pictures becomes 0 even if the card is not full yet, and no more

pictures can be taken. The setting will remain until it is readjusted.

[ 2 / 3 ]

RESET

AUTO

REC VIEW

FULL-TIME AF

FILE NAME

8

765

P O W

E R

/M

O D

E D I

A L

P

A / S / M

O F F

FILE NUMBER (Cont.)


65/86

215

LCD BRIGHTNESSYou can adjust the brightness of the LCD monitor.

Set the Mode dial to P, A/S/M,or .




4

3

2

1


1

42

[ 3 / 3 ]

F2.8 1/800 + 2.0P

A/S/MMODE


P O W E

R /

M O D

E D I A L

P

A / S / M

O F F

3


66/86

216


Press the right arrow on theJog dial to select SETUP, thenpress the OK button. appears on

the LCD monitor.

Press the right/left arrows onthe Jog dial to select thebrightness.

Press the OK button toconfirm the setting.


9

8

7

6

5


[ 3 / 3 ]

m/f t

SETUP

986

P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F

765

LCD BRIGHTNESS (Cont.)


67/86

217

METERS/FEET SELECTIONYou can select meters or feet to be used by the Manual focus settingscreen. (In the Macro mode, the unit will shift between centimeters andinches.)





Press the top/bottom arrowson the Jog dial to select m/ft.

Press the right arrow on theJog dial, then press thetop/bottom arrows to select m(meters) or ft (feet).



8

7

6

5

4

3

2

1



1

2

[ 3 / 3 ]

m/f t m

ft

[ 3 / 3 ]

F2.8 1/800 + 2.0P

A/S/MMODE

CARD

SETUPMODESETUP SETUP

P O W E

R /

M O D

E D I

A L

P

A / S / M

O F F

84

7653


68/86

218

INDEX-DISPLAY ADJUSTMENTYou can select the number of frames shown in the Index-Display mode.



Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press the

right arrow to select SETUP.



Press the right arrow on theJog dial, then press thetop/bottom arrows to selectthe number.


Press the OK button to save

the setting. Press again tocancel the Menu.

8

7

6

5

4

3

2

1

Note: If no image is recorded in the card, the Menu screen will not be displayed

when the Menu button is pressed. The setting will remain until it is readjusted.

(Still picture display menu)

1

84

7653P

A / S / MO

F F

P O W E R / M O

D ED

I A L

2

[ 2 / 2 ] 1 0


[ 1 / 1 ]

49

16

ALL RESET


69/86

7MISCELLANEOUS

OL Y MP

U S D I GI T A L

C A M

E R A


70/86

220

QUESTIONS AND ANSWERSQ

How long will the batteries last?

A Battery life is affected by many variables such as the amount of LCDmonitor use, the frequency of flash use, as well as by the kind ofbattery used and the environmental conditions under which thecamera is used. Using the LCD monitor frequently will use up yourbatteries quickly. Keep the LCD monitor turned off to save power. Useof the optional AC adapter is recommended.

Q

How can I correct the clock in the camera that will be used to recordthe date on the image data?

ADate adjustment is not made when the camera is shipped. You canadjust the date either from the camera or from the computer. (p. 34)

QHow should I store the camera?

ACameras are susceptible to damage caused by dust, moisture, andsalt. Wipe and dry the camera thoroughly before storing it. After usingit at the beach, wipe it with a cloth that has been moistened with freshwater and then wrung out. Do not store in an area where mothballsare used. Unload the batteries if you do not plan to use the camera fora long period.

QWhy do the subjects eyes sometimes appear red in pictures?

AThis red-eye phenomenon occurs with all cameras when a flash isused. It is caused by light from the flash reflecting off the retina at theback of the eye. Red-eye varies depending on the individual and theshooting conditions such as ambient lighting. Use of the Red-EyeReducing Pre-Flash mode significantly reduces this phenomenon.


71/86

221

QCan I use a filter, hood or conversion lens?

A You cannot use a filter or a hood. A conversion lens adapter (optional)is required to attach a conversion lens to the camera.

QCan I use an extension flash?

AYes you can. You can use an extension flash with a grip (p. 90).

For more information, please see our Internet home page(http://www.olympus.com).


72/86

222

TROUBLESHOOTING

OPERATING PROBLEMSThe camera does not work.1 The power is OFF.

[ Set the Mode dial to turn on the power. (P. 36)2 The batteries are loaded incorrectly.

[ Reload the batteries correctly. (P. 28)3 The batteries are exhausted.

[ Replace the batteries with new ones. (P. 28)4 The batteries are temporarily unable to function.

[ Keep the batteries warm while using the camera.5 Power has shut off to conserve battery consumption.

[ Operate the shutter button or the zoom lever.6 It is connected to a personal computer.

[ The camera will not operate while it is connected to a personalcomputer.

No picture is taken when the Shutter release button is pressed.1 The flash has not finished charging or the previous picture is being

written into the card.[

Remove your finger from the Shutter release button and wait untilthe Green lamp or the Orange lamp stops blinking. (P. 48/64)2 There is a problem with the card.

[ See the Error code chart. (P. 227)3 The card is full.

[ Replace the card, delete unwanted pictures or transfer the data toa computer and delete all of the pictures. (P. 32/113/120/180 ~ 184)

4 The batteries ran out.[ Replace the batteries with new ones. (P. 28)

5 The battery power is low.[ Replace the batteries with new ones. (Do not open the Battery

compartment cover when the Card access lamp is blinking.)(P. 28)

6 The buffer memory is full.[ Wait until there is room in the buffer. (P. 51/129)

7 A write-protect adhesive seal is placed on the card or there is no cardin the camera.[ Insert a new card in the camera. (P. 32)

8 The Mode dial is set to .[ Set the Mode dial to P, A/S/M or . (P. 37)


73/86

223

The flash does not fire.1 The flash mode was set to the Off mode.

[ Check the flash mode before shooting. (In the Sequence mode

and the Panorama mode, the flash cannot be used.) (P. 64)2 The subject is lighted.[ Set the flash to Fill-In mode. (P. 64/66)

The pictures already taken do not appear on the LCD monitor.1 The camera is in the Record Mode.

[ Set the Mode dial to . (P. 108/152)2 There is no picture in the card.

[ NO PICTURE appears on the LCD monitor. (P. 108)3 There is a problem with the card.

[ See the Error code chart. (P. 227)4 It is connected to a TV.

[ The LCD monitor is turned off while the camera is connected to aTV. (P. 124)

The LCD monitor is hard to read.1 The brightness may be incorrectly set.

[ Adjust the brightness. (P. 215)2 It is under sunlight.

[ Block the sunlight.3 The LCD monitor is broken.

[ Have it repaired.

When the camera is connected to a computer, an error messageappears while data is being transferred to the computer.1 The cable is not plugged in correctly.

[

Connect the cable correctly. (P. 182/183)2 The power is OFF.[ Set the Mode dial . (P. 183)

3 The batteries are exhausted.[ Replace the batteries with new ones (P. 28) or use the optional

AC adapter (P. 30).4 The serial port is not selected correctly.

[ Use the operating system software to make sure the serial port isselected correctly.

5 There is no available serial port.[ Make one available by following the computers instructions.


74/86

224

TROUBLESHOOTING (Cont.)Image protect, Single-erase, All-frame erase or Card format cannotbe performed.1 A write-protect adhesive seal is affixed to the card.

[ Use the card after peeling off the seal. Do not reuse the writeprotect seal. (P. 121)

PROBLEMS WITH IMAGESThe picture is out of focus1 The camera moved when the shutter button was pressed.

[ Hold the camera correctly, and press the shutter button.

(P. 38/39)2 The viewfinders autofocus mark was not positioned on the subject.[ Position the autofocus frame on the subject, or use the focus

lock. (P. 53/131)3 The lens is dirty.

[ Clean the lens with a soft dry cloth.4 The mode was not selected correctly.

[ Shoot with the Macro mode when the subject is within the rangeof 8"~31". For further distances, shoot with the Standard mode.(P. 56/69)

5 The Shutter release button was pressed while atanding in front of thecamera in the Selftimer mode.[ Press the Shutter release button while looking into the viewfinder,

not while standing in front of the camera. Or, use the remotecontrol. (P. 76/138)

6 The Manual focus was used with the wrong focal range.[ Use the right Manual focus for the distance. (P. 71/135)

The picture is too dark.1 The flash was blocked by a finger.

[ Hold the camera correctly, keeping your fingers away from theflash. (P. 38)

2 The subject was out of the working range of the flash.[ Shoot within the flash working range. Or, use an extension flash.

(P. 64/92)3 The flash mode was set to the Off mode.

[

Check the flash mode before shooting. (P. 64)


75/86


76/86

226

SYSTEM CHARTA variety of capabilities are available when connected to optionalequipment.

Printer (P-330N/P-330) TV

Personal computer

MO driveSmartMedia

FlashPath

PC card adapter

AC adapterCamera

Wide conversionlens

Macroconversion lens

Conversion lensadapter

Tele Conversionlens

Remotecontrol

TV

Extension flashGripBracket cable

SmartMediaReader/ Writer


77/86

227

ERROR CODESError codes appear when there is a problem with the camera.Error codes displayed on the control panel will flash.

(No display)

LCD monitorCARDCOVEROPEN

NO CARD

CARDFULL

WRITEPROTECT

CARDERROR

PICTUREERROR

Error contentThe card cover isopen.

The card is notinserted, or itcannot berecognized.

No more picturescan be taken.

Writing to thecard is

prohibited.

Cannot record,play back orerase pictures inthis card.

The recordedimage cannot beplayed back withthis camera.

RemedyInsert a card and closethe cover.

Insert a card. Or insertthe card again.

Replace the card orerase unneeded pictures.

If you are taking pictures,remove the write-protect

adhesive seal.

If the card is dirty, wipe itwith a clean tissue andinsert it again. Or, formatthe card. If the problem isstill not corrected, thiscard cannot be used.

Load the image usingpersonal computer imageprocessing software. Ifthat cannot be done, theimage file is partiallydamaged.

Control panel


78/86


79/86

229

OPTIONAL ITEMS Photo Printers For Olympus Digital Cameras AC Adapter Camera Case

Standard SmartMedia Card (8/16/32/64MB) FL-40 extension flash Exclusive Grip Bracket cable FlashPath Floppy Disk Adapter PC Card Adapter NiMH Batteries NiMH Battery Charger

USB SmartMedia Reader/Writer

NOTES ON DISPLAY ANDBACKLIGHT

The Control panel and the fluorescent lamps used in the LCD monitorhave a limited service life. If they begin to darken or flicker, contact yournearest service center.

In cold conditions, the display backlight may be slow to come on or maychange color suddenly. To avoid this, keep the camera warm whenusing in cold temperatures. Backlight performance will return to normalunder normal temperature conditions.

When the color LCD monitor shows different pictures, some pixels maynot change color and remain on or off. This phenomenon may be dueto a lag in some circuits, but is considered to be within the normaloperating tolerances of the LCD monitor. In addition, the brightness of

the color LCD monitor may vary between pictures.


80/86

230

COMPATIBILITY OF THEPICTURE DATA

Images taken by this camera may not be properly displayed or printedwith other Olympus digital cameras.

Images taken by other Olympus digital cameras may not be properlydisplayed or printed with this camera.


81/86

231

SPECIFICATIONSProduct type : Digital camera (for shooting and displaying)Recording System

Still : Digital recording, JPEG (in accordance withDesign rule for Camera File system (DCF)),TIFF (non-compression), Digital Print OrderFormat (DPOF)

Sound withstill images : Wave formatMovie : QuickTime Motion JPEG support

Memory : 3V (3.3V) SmartMedia 2MB, 4MB, 8MB,16MB, 32MB, 64MB

No. of storable pictures : Approx. 0 frame (TIFF/2048 x 1536)(When an 8 MB card is used) : Approx. 4 frames (SHQ): Approx. 10 frames (HQ): Approx. 24 frames (SQ1/1280 x 960 NORMAL): Approx. 82 frames (SQ2/640 x 480 NORMAL)

Erase : One-Frame erase / All-Frames eraseImage pickup element : 1/1.8 inch CCD solid-state image pickup

: 3,340,000 pixels (gross)

Recording image : 2048 x 1536 pixels (TIFF/SHQ/HQ): 1600 x 1200 pixels (TIFF/SQ1): 1280 x 960 pixels (TIFF/SQ1): 1024 x 768 pixels (TIFF/SQ2): 640 x 480 pixels (TIFF/SQ2)

White balance : Full Auto TTL (iESP auto), Preset (Daylight,Overcast, Tungsten light, Fluorescent)

Lens : Olympus lens 6.5 ~ 19.5 mm, F2.8, 6

elements in 8 groups (equivalent to 32 ~ 96mm lens on 35 mm camera),aspherical glass

Photometric system : Digital ESP metering system,Spot metering system

Exposure control : Program auto, Aperture priority,Shutter priority, Manual

Aperture : W : F2.8 ~ 11.0: T : F2.8 ~ 11.0

Shutter speed : Used with mechanical shutterStill : 1 ~ 1/800 sec. (16 ~ 1/800 sec. with manual

setting)


82/86

232

SPECIFICATIONS (Cont.)Movie : 1/30 ~ 1/10000 sec.

Working range : 31" ~ (Standard mode)8" ~ 31" (Macro mode)

Viewfinder : Optical real image viewfinder (Autofocusmark/Backlighting correction mark),LCD monitor

LCD monitor : 1.8" TFT color LCD displayNo. of pixels : Approx. 114,000 pixelsOn-screen display : Date/Time, Frame number, Protect,

Recording mode, Battery check, Pictureinformation, Print-reserve, Menu, etc.

Battery charging timefor flash : Approx. 6 sec. (at normal temperature withnew batteries)

Flash working range : W : Approx. 31" ~ 12.5 ft: T : Approx. 8" ~ 12.5 ft

Flash modes : Auto-Flash (automatic flash activation in lowlight and backlight), Red-Eye ReducingFlash, Fill-In Flash (forced activation),Off (no flash)

Autofocus : TTL system iESP autofocus, Contrastdetection system

Focusing range : 8" ~ Selftimer : Electronic Selftimer with 12-sec. delayOuter connectors : AC adapter connector, Computer connector

(RS-232C), A/V output connector, USBterminal (USB 1.0 compatible), Extensionflash connector

Date and time : Recorded with picture data simultaneouslyAutomatic calendarsystem : Up to 2030Operating environment

Temperature : 32 ~104F (operation) 4 ~ 140F (storage)

Humidity : 30 ~ 90% (operation)


83/86

233

10 ~ 90% (storage)Power supply : For batteries, use 2 CR-V3 lithium battery

packs, or 4 AA NiMH batteries, NiCd

batteries, alkaline batteries or lithiumbatteries.AC adapter (optional)

Dimensions : 4.3" (W) x 3.0" (H) x 2.6" (D)(109.5 x 76.4 x 66.4 mm)

Weight : 10.6 oz (without batteries/card)

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OROBLIGATION ON THE PART OF THE MANUFACTURER.


84/86


85/86

235


86/86

OLYMPUS OPTICAL CO., LTD.San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan. Tel. 03-3340-2026

OLYMPUS AMERICA INC.Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 516-844-5000

(Customer support) Tel. [email protected]

OLYMPUS OPTICAL CO. (EUROPA) GMBH.(Premises/Goods delivery) Wendenstrae 14-16, 20097 Hamburg, Germany. Tel. 040-237730

(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.www.olympus-europa.com

OLYMPUS OPTICAL CO. (U.K.) LTD.2-8 Honduras Street, London EC1Y 0TX, United Kingdom. Tel. 0171-253-2772

camedia c 3000 engl

Documents