1(7)                                  

Ole  Fridtjov  Dolven  Head  of  Risk  &  Safety  department  

Senior  Advisor,  Risk  and  safety  management  Date  of  Birth:   01.11.1978  Nationality:   Norwegian  Family  status:   Married,  2  children  Phone:   920  16  379  Email:   ole.dolven@gmail.com    

 

 

 Background   More  than  10  years  experience  working  with  safety  and  risk  management  in  the  oil  

&  gas  industry.  Experience  includes  Operations,  studies,  detail  engineering,  construction  and  commissioning,  on  both  greenfield  and  brownfield  projects.  HSE/Technical  Safety  Lead  experience  from  both  contractor  and  operator  company,  and  also  has  senior  project  and  company  management  experience.  Currently  holds  the  position  as  “HSE  advisor”  on  the  Butch  development  project  for  Centrica  (subsea  tie-­‐back).    

Experience  working  with  the  PSA  through  audits  and  studies,  and  has  international  work  experience  from  Singapore  and  London.  

MSc  in  Industrial  Mathematics  from  Norwegian  University  of  Science  and  Technology,  and  holds  necessary  offshore  certificates.    

Key  Qualifications   § Project  experience  ranging  from  early  phase  studies  to  detail  engineering,  construction  and  commissioning,  including  development  of  design  basis/scope  of  work  

§ HSEQ  management  § Technical  safety  &  Process  safety  § Quantitative  and  qualitative  risk  analysis,  with  emphasis  on  PSA´s  new  risk  

perspective  § Development  of  risk  analysis  methodology  § Barrier  management    § ALARP  evaluations  § Site  representative  -­‐  project/vendor  follow-­‐up  § Audit  facilitation  § Research  &  development  § Regulatory  compliance  § Project  management,  including  cost  and  schedule  estimates  § Personal  integrity  and  professional  appearance  § Trustworthy,  proactive,  fair  and  attention  to  details  

   

 

  2(7)                                  

 

Professional  Experience  

Omega,  Norway  ..............................................................................  02.2016-­‐Present  Current  position:  HSE  Advisor  for  Centrica  See  further  description  under  “Projects”  below.    Combitech  (former  Bayes  Risk  Management),  Norway  ....................  04.2008-­‐01.2016  Current  position:  Head  of  Risk  &  Safety  department  Previous  position:  Senior  advisor,  Technical  safety  and  risk  management  

Responsibilities  § Project  management    § Risk  management  § Budget  responsible  for  department  and  projects  § Support  Combitech  personnel  in  their  roles  in  Client  offices  § Business  development  within  risk  and  barrier  management    § Customer  contact  § Presentations  to  clients  and  at  conferences  § Building  relationships  internally  and  externally  § Develop  and  maintain  management  systems  § Personnel  management      

Projects    Centrica….…………………..………………………………………….……………………………………  2015  Project:  Butch  development,  subsea  tie-­‐back  to  Ula  Position:  HSE  Advisor  Phase:  FEED  Location:  Stavanger,  Norway  

Responsibilities  § Technical  safety    § HSE  § Barrier  management  /  development  of  bow-­‐ties  § Risk  management    § Participation  in  HAZID,  HAZOP  and  other  qualitative  risk  analyses    § Follow-­‐up  of  all  project  HSE  deliverables  from  multiple  contractors    § Identification  and  follow-­‐up  of  risk  analyses    

Returkraft…………………..………………………………………….……………………………………  2015  Project:  HAZID,  shutdown  period  –  Returkraft  incineration  plant  Position:  HAZID  scribe  Phase:  Study  Location:  Kristiansand,  Norway  

Responsibilities  § Preparation  of  HAZID  workshop  § Note  actions  and  discussions  during  workshop  § Prepare  and  finalize  report  to  Client    

 

 

  3(7)                                  

 

SAAB………………………..………………………………………….…………………………….2014  -­‐  2015  Project:  Risk  based  decision  support  in  drilling  operations  Position:  Project  Manager    Phase:  Research  and  Development,  “Establishment  of  business  plan”  Location:  Stavanger,  Norway  

Responsibilities  § Ensure  delivery  of  report  within  the  given  time-­‐  and  cost  frames  § Market  analysis  and  future  outlook  § Project  risk  analysis  § Technical  description  of  R&D  tool  § Establish  cost  and  schedule  for  the  following  development  phase  § Risk  analysis    

Petroleum  Safety  Authority……………………………….…………………………….2014  -­‐  2015  Project:  Robust  well  design  Position:  Project  Engineer    Phase:  Study  Location:  Stavanger,  Norway  

Responsibilities  § Lead  and  participate  in  interviews  of  relevant  personnel  from  participating  

companies  § Risk  analysis  of  influencing  factors  on  robust  well  design    

WorleyParsons  Rosenberg……………………………………….…………………………….2013  -­‐  2014  

Held  two  positions  within  the  WorleyParsons  organization:  § HSE  Lead  (Contractor)  on  the  GEA  capacity  increase  project  for  COPSAS  (FEED)  § HSE  Lead  (Contractor)  on  the  Njord  B  to  shore  project  for  Statoil  (Concept  

selection/FEED)  Location:  Stavanger,  Norway  

Responsibilities  § Responsible  for  all  technical  safety  deliverables  § SIL  analyses  § Participation  in  and  preparation  of  HAZID,  HAZOP  and  other  qualitative  risk  

analyses  § Supporting  and  guiding  the  HSE  team  to  a  good  overall  performance,  especially  

the  inexperienced  members  of  the  team  § Participating  in  meetings  with  vendors,  subcontractors  and  client  § Follow-­‐up  of  vendor  packages  § Identifying  and  follow-­‐up  of  risk  analyses    § Risk  management  § ALARP  evaluations  § Establish  cost  and  schedule  estimates  for  following  phases  § Project  risk  analysis    

 

 

  4(7)                                  

 

ConocoPhillips……………………………………………………………………………………….2011  -­‐  2013  Project:  New  Ekofisk  Accommodation  &  Utility  platform  -­‐  EKOL  Position:  Technical  Safety  &  Risk  Management  Lead  (Contractor)  Phase:  Detail  engineering,  Construction  &  Commissioning  Location:  Singapore,  Singapore  

Responsibilities  § Establish  strategies  and  philosophies  for  safety  design  § Follow-­‐up  of  all  project  Technical  Safety  deliverables  at  contractor  site    § SIL  analyses  § Barrier  management  § ALARP  evaluations  § Participation  in  HAZID,  HAZOP  and  other  qualitative  risk  analyses  § Identification  and  follow-­‐up  of  risk  analyses  § Risk  assessments  § Vendor  packages  follow-­‐up  § HSE  inspections  during  construction  phase  § Establish  commissioning  procedures  for  safety  systems    § System  responsible  engineer  for  carrying  out  commissioning  of  safety  systems    § Participate  in/facilitate  PSA  audits    Statoil…………………………………………………………………………………………………….2008  -­‐  2010  

Held  a  number  of  positions  within  the  Statoil  project  organization,  including:    Snorre  Redevelopment  § HSE  Lead  (Contractor)  on  the  Increased  oil  recovery  project  on  Snorre  A/B  (detail  

engineering,  construction  and  commissioning)  § HSE  Lead  (Contractor)  on  the  Snorre  2040  project  on  Snorre  A/B  (Concept  

selection)  § Risk  management  Lead  for  the  new  Total  Risk  Analysis  for  Snorre  A  plant  

integrity  § HSE  Lead  (Contractor)  on  the  Snorre  Export  project  on  Snorre  A/B  (detail  

engineering)  § HSE  Lead  (Contractor)  on  the  Living  Quarter  upgrade  project  on  Snorre  A  (FEED)  § HSE  Lead  (Contractor)  on  the  Weight  reduction  and  new  freshwater  package  

project  on  Snorre  A  (FEED)  § HSE  Lead  (Contractor)  on  the  Replacement  of  seawater  package  project  on  

Snorre  A  (FEED)  Location:  Stavanger/Haugesund,  Norway    Kårstø  § HSE  Lead  (Contractor)  on  the  Double  Inlet  crossover  (DIXO)  project  (FEED)  § HSE  Lead  (Contractor)  on  the  NGL  metering  project  (FEED)  Location:  London,  UK    Statfjord  A  § HSE  Lead,  Technology  qualification  of  double  block  and  bleed  plug  –  ballast  

water  system  Location:  Stavanger,  Norway  

Responsibilities  § Development  of  design  basis  and  scope  of  work  

  5(7)                                  

§ Cooperation  with  technical  personnel  (engineering  contractor  (Fabricom),  Statoil  Plant  Integrity,  Operations)  

§ Participation  in  HAZID,  HAZOP  and  other  qualitative  risk  analyses  § Follow-­‐up  of  all  project  Technical  Safety  deliverables  at  contractor  site    § Risk  analysis  § ALARP  evaluations  § Evaluating  technical  information,  including  processing  non-­‐conformance  reports  

and  answering  technical  queries  § Commissioning  procedures  and  testing  of  safety  systems  offshore  § Technology  qualification  § Cost  and  schedule  input  for  following  phases  § Project  risk  analysis    

Bayes  study  for  ConocoPhillips…………………………………………………………….2009  -­‐  2010  Project:  Platform  Well  Control  Emergency  Preparedness  Solution,  Ekofisk  Position:  Bayesian  modeling  responsible  Phase:  Study  Location:  Stavanger,  Norway    

Responsibilities  § Establishment  of  physical  model  representing  the  well  control  emergency  

preparedness  using  Bayesian  networks  § Risk  analysis  § Prepare  study  report    

Aker  Kværner  Offshore  Partner,  Norway…  ...............................................  2006-­‐2008  Safety  Engineer    Project:  Tampen  Maintenance  &  Modifications  (Statoil)  Position:  Technical  safety  &  risk  management  engineer  Phase:  Studies  and  detail  design  Location:  Stavanger,  Norway    

Responsibilities  § Design  evaluations,  technical  safety  evaluations  and  updating  of  HSE  

documentation    § Participation  in  HAZOP  and  HAZID  § Facilitation  of  3D  model  design  reviews  § SIL  analyses  § Specifications  of  safety  equipment  and  preparation  of  cost  and  weight  estimates    § Working  environment  evaluations  § Risk  assessments  § ALARP  evaluations  § Safety  follow-­‐up  § Studies  and  input  to  work  packages  § Vendor/contractor  follow-­‐up    

 

 

 

  6(7)                                  

IKM  Offshore  Development,  Norway  .......................................................  2005-­‐2005  Safety  Engineer    Seconded  to  Aker  Kværner  Offshore  Partner  –  see  above  for  responsibilities    Sabbatical  and  warehouseman,  COOP  Norge  ...........................................  2003-­‐2005  

Education   Master  degree,  Industrial  Mathematics  ....................................................  1998-­‐2003  Norwegian  University  of  Science  and  Technology  (NTNU),  Norway    Exchange  Student  .............................................................................................  2002  University  of  Newcastle,  Australia  Examen  Philosophicum  .....................................................................................  1997  University  of  Oslo,  Norway  

Other  Relevant  Experience  

HAZOP  facilitation  (Origo  Process)  ....................................................................  2016  Stavanger  Energy  consumption  for  incineration  plants  (speaker  at  conference)  ................  2015  Stavanger  Incident  investigation  (OTG  AS)  .........................................................................  2015  Stavanger  Risk  management  fundamentals  (Bayes)  ...........................................................  2013  Stavanger  Board  member  (Bayes  Holding)  ................................................................  2009-­‐2010  Stavanger  Project  Management,  Tekna  .............................................................................  2009  Oslo  Introductory  course  to  Bayesian  Modelling  (2-­‐day  seminar)  ..............................  2008  Stavanger  Introductory  course  to  AgenaRisk  .....................................................................  2008  Stavanger  2D  Microstation  ................................................................................................  2007  Aker  Kværner  Offshore  Partner  Introduction  to  noise  evaluation  .......................................................................  2006  Aker  Kværner  Offshore  Partner  Introduction  to  process  systems  ........................................................................  2006  Aker  Kværner  Offshore  Partner  Introduction  to  SIL  evaluations  ..........................................................................  2005  Aker  Kværner  Offshore  Partner  Basic  offshore  safety  and  emergency  preparedness  training  .............................  2005  Stavanger  (renewed  2009  &  2013)  

Software  Expertise  

Skilled  user  of  document  databases  such  as  STID,  Livelink,  PIMS,  TIME,  SAP  etc.  

Also  familiar  with  other  programs  such  as  Lotus  Notes,  ProCoSys,  Docmap,  APOS,  teamsite,  Project  Place,  Eroom  and  Apply  Capnor  (scanning  viewer)  

Experienced  user  of  Bayesian  Network  Modelling  software  (AgenaRisk  &  Hugin)  

Language   § Norwegian  ......................................................................................................  Native  § English  ............................................................................................................  Fluent  § Spanish  ....................................................................................................  Basic  skills    § German  ...................................................................................................  Basic  skills  

  7(7)