day-wks

APPENDIX TO BILL OF QUANTATIESDAYWORK

H DAYWORK

Daywork shall be carried out only on the written instructions of the engineer, and rates and prices as provided hereunder shall only apply when the Engineer is of the opinion that the rates quoted in the Bills of Quantities are inapplicable.

H-1 PAYMENT FOR LABOUR

The payment for labour shall be the basic wage quoted in Item (i) "LABOUR" which shall exclude allowances and employee benefits.

To such basic wage the Contractor shall be allowed to charge a percentage addition to cover allowances, employee benefits, profits, overhead charges, supervision, subsistence, temporary scaffolding, staging, checking, light, insurance, transportation, small tools and other operational and contributory items. This percentage addition will be inserted in the Bills of Quantities Item No. H.1 and no increase will be admitted on any grounds or cause whatsoever.

H-2 PAYMENT FOR MATERIALS DELIVERED ON SITE

The Payment for materials shall be at the rates quoted in Item (ii) "MATERIALS" or for materials not listed, the net costs of materials (less discounts) shall be charged. Evidence to prove the amounts paid must be provided by the Contractor.

To such net cost the Contractor shall be allowed to charge a percentage addition to cover overheads, supervision, handling, storage, transportation, profit, insurance and all other charges. This percentage addition will be inserted in the Bill of Quantities Item No. H.2 and no increase will be admitted on any grounds or cause whatsoever.

H3 PAYMENT FOR PLANT

Payment for plant shall be at the rates quoted in Bill of Quantities Item No. H.3 "Plant". Payment shall be made for "operating time" only and excluding travelling time to and from site where required. "Standing time" and breakdown periods shall not be paid for. Rates for plant shall include for wages of all drivers, operators and attendants, all fuel, oil and consumable items, maintenance and other incidentals.

App - 1

/tt/file_convert/577ccd2b1a28ab9e788bb0e5/document.doc05/03/23 3:06 AM

APPENDIX "A"H4 (i) SCHEDULE

The Contractor shall hereunder state the standard time rate of wages which he pays his employees, excluding cost of living, allowances and employee benefits.

ITEM DESCRIPTION UNIT BASIC WAGE

1 Supervisor Hour

2 Carpenter Hour

3 Welder Hour

4 Mason Hour

5 Electrician Hour

6 Plumber Hour

7 Steel Fixer Hour

8 Survey Crew Hour

9 Heavy Equipment Operator Hour

10 Crane Operator Hour

11 Light Equipment Operator Hour

12 Mechanic Hour

13 Truck Driver Hour

14 Roller Driver Hour

15 Spreader Operator Hour

16 Distributor Driver Hour

17 Labourer Hour

The Tenderer is to enter any Trades not included above which he considers likely to be required on a daywork basis. These basic wages quoted shall be those applicable at the time of tender and may only be altered if a subsequent certified wage agreement has been lodged at the Industrial Court.

The Contractor's attention is especially drawn to the General Conditions of Contract. The Contractor will be required to adjust his rates should the relevant collective agreement be revised during the course of the Contract.

App - 2


The Memorandum of Agreement on Wages and Conditions of Service of Government Daily-paid Employees is obtainable from the Government Printery.

APPENDIX "B"(ii) SCHEDULE OF RATES FOR DAYWORK MATERIALS

DELIVERED ON SITE

Item Description Unit Rate

01 75 mm minus Pit Run Gravel or equivalent cu.m.

02 40 mm minus crushed Blue Limestone or equivalent cu.m.

03 20 mm minus crushed Blue Limestone or equivalent cu.m.

04 Sand for Concreting cu.m.

05 Portland Cement Bag

06 Sulphate Resistant Cement kg

09 Welded Wire Fabric

75 mm x 75 mm x 5g sq.m.

150 m x 150 m x 6g sq.m.

10 Reinforced Concrete Culvert Pipe

AASHO M 170 Class II Wall Ba) 450 mm dia. Lin.m.b) 600 mm dia. Lin.m.c) 900 mm dia. Lin.m.d) 1200 mm dia. Lin.m.

11 Formwork for Concrete sq.m.12 Concrete (28 day strength)

a) Class A (20.59 N/mm2) cu.m.b) Class B (15.69 N/mm2) cu.m.c) Class C 10.30 N/mm2 cu.m.

13 Bar Reinforcing Steel kg14 Blue Limestone or equivalent Boulders

150 mm 250 mm cu.m.

The tenderer is to enter any material not included above which he considers may be required on a daywork basis.

APPENDIX "B con'td"

App - 3


(ii) SCHEDULE OF RATES FOR DAYWORK MATERIALS

DELIVERED ON SITE


15

16

17

18

19

20

21

22

23

24

25

App - 4


APPENDIX "C"

(iii) SCHEDULE OF RATES FOR DAYWORK PLANT


1. D4/D6/D8 Tractor and dozer or equivalent Hour

2. Motor Grader “

3. Dump Truck - 4 cu.m “

4. 3 ton truck - Flat top “

5. 0.5 cu.m. power shovel “

6. Vibrating Roller 20 T/10T “

7. Tandem Roller “

8. Water Pump “

9. Sheep Foot Compactor “

10. 10/7 concrete mixer “

11. Compressor - 3.5 cu.m./min. “

12. Compressor - 7.0 cu.m./min. “

13. Pneumatic drill or pavement breaker “

14. Power Vibrator “

15. Power Compactor “

16. Crane - 1.5 cu.m. “

17. Concrete Bucket “

18. 22 R.B. Crawler Crane or equivalent “

19. Mustang Priestman 120 Excavator or equivalent “

20. JCB Backhoe or equivalent “

Rates quoted shall include for transportation to works site, wages of all drivers, operators and attendants, fuel, etc.

The Tenderer is to enter any equipment not included above which he considers likely to be required on a daywork basis.

App - 5


(iii) SCHEDULE OF RATES FOR DAYWORK PLANT


21

22

23

24

25

26

27

28

29

30

App - 6


day-wks

Documents