dsa 5600 - fresa cnc

8/18/2019 Dsa 5600 - fresa cnc

1/12

(732) 938-2000 / 800-LAB-VOLT, FAX: (732) 774-8573, E-MAIL: [email protected]

(418) 849-1000 / 800-LAB-VOLT, FAX: (418) 849-1666, E-MAIL: [email protected]: http://www.labvolt.com

A Automation and Robotics CNC MILL SYSTEM

MODEL 5600

GENERAL DESCRIPTION

The CNC Mill System, model 5600, provides training incomputer-aided manufacturing (CAM) with an industrial-grade microprocessor-driven CNC mill. The systemallows students to practice computer numerical controlled(CNC) code programming and editing, learn to operate

mill components, controls, and tools, set a programmedreference zero, follow the steps necessary to machine apart to programmed specifications, and apply the machinecode language to current mill technology.

The CNC Mill can machine pieces of soft materialssuch as plastic and wax, as well as harder materials suchas aluminum, mild steel, and brass. It consists of a millingtable, a headstock carrying the spindle motor, and a cast-iron vertical column with dovetail slide. The CNC mill ismounted on a solid steel chassis and is equipped withR8 tooling. The stock to be milled is secured in a vise that

holds it to the milling table. Two ball screws, each drivenby a stepper motor, are used to move the table along theX axis (left and right) and Y axis (backward and forward)to feed the stock through the periphery of the end mill. Athird ball screw, also driven by a stepper motor, is used

to move the headstock along the Z axis (up and down)for positioning the end mill. The speed of each stepper motor can be programmed separately for feed rates upto 508 mm/min (20 in/min). A 746-W (1.0-hp) DC motor rotates the spindle at speeds programmable up to3400 rpm. The end mill can be changed to accommodatedifferent stock materials and milling designs.

8/18/2019 Dsa 5600 - fresa cnc

2/12

CNC MILL SYSTEM

MODEL 5600

2

TABLE OF CONTENTS

General Description . . . . . . . . . . . . . . . . . . . . . . . . . 1

CNC Mill Software . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Optional Pneumatic Vise . . . . . . . . . . . . . . . . . . . . . 3

Table of Contents of the User Guides . . . . . . . . . . . 4

List of Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . 5

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Ordering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 9

A computer (not included) is used to create NC partprograms with G and M machine codes or their conversa-tional code equivalents. The created programs are down-loaded to the on-board microprocessor of the CNC mill,which stores and executes them. Since the CNC millconnects directly to the serial or Ethernet port of a com-puter, or directly to a network, no additional interface cardis required. The computer is free to be used for anyadditional applications, since it is not dedicated to thecontrol of the mill.

The CNC mill is designed for use with the includedLab-Volt CNC Mill Software, Model 5660. This Windows®-based software permits creation of G and M code partprograms for download to the CNC mill. It features toolpath emulation, which allows students to set up the toolpaths and the cut steps, and create a part program tosimulate tool motion on a monitor in order to verify NCcodes and the finished part prior to the actual cutting.Canned cycles can be programmed. The software canimport NC part programs created with other

CAM programs that support G and M codes.The CNC mill features a control panel that permits the

mill to be operated manually. This panel includes amultiple-line LCD display, an easy-to-use membranekeypad, an error indicator/pause button, and a key-re-leased emergency stop push-button. The mill parameters,including the spindle speed, the feed rate, the referencepoint, and the X, Y, and Z axes coordinates can be setby accessing different menus. During the machining, thecontrol panel displays the X, Y, and Z axes coordinates,as well as the current feed and spindle speed.

The CNC mill is designed for maximum safety. Safetydoors provide protection during machining. Magnetic

interlocks located on the doors stop the spindle and theaxes if a door is opened during machining. Limit switchesprevent over-travel of the mill's spindle and table. Press-ing the emergency stop push-button on the control panelcuts off the power to the spindle motor and stops theaxes.

The CNC mill supports low-voltage communicationswith robotic units to permit students to create automatedwork cells, ideal for implementing computer-integratedmanufacturing (CIM). For this purpose, the CNC millfeatures a 15-pin TTL/IO port providing four 5-V digitalinput and four 5-V digital output lines for

TTL communication to an automation work cell. This portcan be connected to the Lab-Volt Servo-Robot, Model5250, offered as an option to achieve automatic loadingand unloading of the stock with a robot arm. The CNC millalso features a 5-pin solenoid driver port providing con-nections for up to four auxiliary devices. This port can beconnected, for example, to the pneumatic control box of the optional Pneumatic Vise, Model 5616, to achieveautomatic clamping and unclamping of the stock loadedin the CNC mill. The TTL/IO and solenoid driver ports of the CNC mill are M-code supported through the CNC MillSoftware, Model 5660.

The CNC Mill System comes with the accessories,

software, and cables required for system operation.These include, among others, a vise, a basic milling kit,100 blocks of industrial machinable wax, a serial cable,a cross-over Ethernet cable, and a copy of the CNC MillSoftware, Model 5660.

Also included are two user guides. One user guidegives students experience with equipment designed toprepare them for the automated manufacturing environ-ment. A user guide for the CNC Mill Software,Model 5660, is also included. It provides documentationdescribing the features of the CNC Mill Software.

To enhance or expand the capabilities of the system,an assortment of milling tools and stock materials of

different sizes are offered as option.

Mill Features

C On-board microprocessor

C Full manual control mode

C Feed rate override

C Spindle speed override

Control Panel Features

C Main power LED indicator

C 20-character by four-line LCD display

C 12-key membrane keypad

C Manual mode controls for:

– X, Y, and Z axes coordinates

– Feed rate

– Spindle speed

– Units used (millimeters or inches)

– TTL I/O and solenoid outputs

8/18/2019 Dsa 5600 - fresa cnc

3/12

3

C During execution, display of:

– X, Y, and Z positions

– Feed Rate

– Spindle Speed

– Current G and M code

– TTL I/O and Solenoid Output Status

– Tool Change

Safety Features

C Enclosed bed and work area

C Key-released emergency stop push-button

C Error indicator/pause button

C Switches monitored by the machine for:

– safety door open

– over-travel protection on all axes

C Ability to restart programs from stopping point after operator abort or safety interruption has been cor-rected.

CNC MILL SOFTWARE

This Windows®-based 32-bit software runs under Windows® XP and Vista. It features a parametric-basedgraphical tool editor, a 3D Tool Path Emulator, and aneasy-to-use graphical interface. The software can importNC part programs created with other CAM programs thatsupport the G and M codes.

Features

C Provides G and M code programming

C Editor printout of part program

C Part program error-checking using a syntax parser

C Fast syntax verification with line highlighting to speedpart program debugging

C Parametric, graphical view tool editor with support for 20 tools

C Full G and M code help with graphical display andexample code

C Serial and Ethernet download support for the Lab-Volt Automation CNC mills, Models 5400 and 5600

C Full 3D Tool Path Emulator with wireframe user-defined3D perspective featuring:

– Top, front, side, and oblique standard views

– Part rotation and camera positioning for better emula-tion viewing

– Zoom in/zoom out capability

– Tool radius display during emulation

– Editor line highlighting while emulating part programto track progress

– Active display of X, Y, and Z axes coordinates

– Display of current tool

– Display of current G and M codes

– Display of current feed rate and spindle speed

– Simulation of current solenoid and I/O port activity

– Real-time estimation of machining time

C AutoCAD DXF file import function featuring:

– Ten layers with independent feed, tool, speed, anddepth settings

– Support for LINE, MLINE, LWPOLYLINE, POINT,CIRCLE, and ARC entities

– Output of the same layer at separate depths to allowmulti-pass engraving

OPTIONAL PNEUMATIC VISE

The Pneumatic Vise, Model 5616, consists of a cylinder-operated vise used to achieve automatic clamping and

unclamping of the stock loaded in the CNC Mill. ThePneumatic Vise is supplied with a pneumatic control box

that connects to the solenoid driver port of the CNC Mill,

permitting M-code control of the extension and retraction

of the vise cylinder with the CNC Mill Software,Model 5660. The air compressor is not included.

8/18/2019 Dsa 5600 - fresa cnc

4/12

CNC MILL SYSTEM

MODEL 5600

4

TABLE OF CONTENTS OF THE USER GUIDES

CNC Mill (85977-E0)

Section 1 – Overview and Installation

– Functional description

– Front panel – Back panel connectors

– Control panel

– Handling

Section 2 – Tools and Accessories

– Cutting tools

– End mill holders and collets

– Vises and clamps

– Cutting precision

– Conventional milling vs climb milling

Section 3 – Using the Mill Interface – The mill firmware

– Feed rate

– Spindle speed

Section 4 – Milling Stock

– Aligning a vise with the mill axes

– Setting the PRZ using an edge finder

– Measuring tool offsets

– Connecting the mill to a computer or Ethernet net-work

– Downloading a program

– Executing a part program

Section 5 – Tutorial Exercise

– Tutorial

Section 6 – Maintenance

– Routine maintenance

– Updating the firmware

CNC Mill Software (36189-E0)

Section 1 – Overview of the CNC Mill Software

– The Main Screen

– The Tool Bar – The Menu Bar

Section 2 – Operation

– The File Menu

– The Edit Menu

– The Search Menu

– The Mill Menu

– The Options Menu

– The Window Menu

– The Help Menu

Section 3 – The Part Program Editors – The Line Editor

– The Block Editor

Section 4 – Tutorial Exercises

– Creating a simple G and M code part program withthe Line Editor

– Emulating and downloading a G and M code partprogram

– Creating, editing, and exporting a simple blockpart program with the Block Editor

– Importing a *.DXF file into the Line Editor

8/18/2019 Dsa 5600 - fresa cnc

5/12

1 The ordering numbers shown apply to the English 120-V version. Other versions are available. Refer to the Ordering Numbers section.

2 The content of this model is in accordance with the requirements of the Project Lead the Way program.

3 Model 5601-10 must be purchased along with this model to be in accordance with the requirements of the Project Lead the Way program.

5

LIST OF EQUIPMENT

CNC Mill System, MODEL 5600-20

QTY DESCRIPTION ORDERING NUMBER1

1 CNC Mill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5600-B0

1 Wax Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5404-001 CNC Mill Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5660-00

1 CNC Mill, User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85977-E0

1 CNC Mill Software, User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36189-E0

OPTIONAL EQUIPMENT

DESCRIPTION ORDERING NUMBER1

Wax Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5403-00

Wax Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5404-00

Plexiglass Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5405-00


Engraving Plate Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5407-00Plexiglass Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5408-00

Aluminum Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5409-00


Quick Tool Changing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5601-00

Quick Tool Changing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5601-102

Four-jaw Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5603-00

Milling Vise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5604-00

Intermediate Milling Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5607-00

Collet Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5609-00

End Mill Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5612-103

Engraving Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5613-00

Engraving Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5613-103

Pneumatic Vise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5616-00

CNC Mill Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5660-00

8/18/2019 Dsa 5600 - fresa cnc

6/12

CNC MILL SYSTEM

MODEL 5600

6

SPECIFICATIONS

Model 5600-B – CNC Mill 120 V – 60 Hz 220 V – 50 Hz 240 V – 50 Hz

Power Requirement Current 3 A 2 A 2 A

Supplied Fuses Current Rating one 2 A and three 1.5 A one 1 A and three 1.5 A

Voltage Rating 250 V

Mechanical Working Range X Axis (Longitudinally) 178 mm (7 in)Y Axis (Transversely) 102 mm (4 in)

Z Axis (Vertically) 203 mm (8 in); may vary with tool holder or collet used

Positioning Repeatability ±0.025 mm (±0.001 in)

Resolution ±0.0079 mm (±0.00031 in)

Milling Table Surface 140 x 305 mm (5.5 x 12 in)

Hold-Down T Slots two; 15.9 mm (0.625 in) width, 63.5 mm (2.5 in) spacing

Maximum Table-to-Spindle Clearance 216 mm (8.5 in)

Cutting Spindle Throat Clearance 191 mm (7.5 in)

Spindle Taper R8

Main Spindle Drive Continuous Speed Range 0-3400 rpm

Motor 746 W (1 hp), overload protected

Feed Motors Type Stepper

Resolution 400 steps/r

Rapid Traverse Speed 508 mm/min (20 in/min)Mill Vise Opening 98 mm (3.875 in)

Width 79 mm (3.125 in)

Accessories

End Mills (two flutes) with Holder Shank Diameter Mill Diameter End Type

4.76 mm (3/16 in) 1.59 mm (1/16 in) square (x2)

9.53 mm (3/8 in) 3.18 mm (1/8 in) square

9.53 mm (3/8 in) 6.35 mm (1/4 in) square

R8 End Mill Holder Size for 9.53 mm (3/8 in) shank end mills

R8 Collet Size for 4.76 mm (3/16 in) shank end mills

Edge Finder single 4.76 mm (3/16 in) shank, 5.08 mm (0.2 in) head

Hold Down Set clamping accessories for clamping the vise or part

Null Modem Serial Cable Length 3.05 m (10 ft)

Connectors DB9 female/female

TTL/IO Cable Length 3.05 m (10 ft)Connectors DB15 male/male

Ethernet Crossover Cable Length 2.13 m (7 ft)

Connectors RJ45 male/male

Engraving Plate Holder holds work measuring 203.2 x 50.8 x 3.18 mm (8 X 2 X 0.125 in)

User Guide see the Table of Contents of the User Guide section

Set of Tools hex keys, wrenches and dial indicator

Shim Dimensions 60 x 40 x 13 mm (2.3 x 1.6 x 0.5 in)

Physical Characteristics Dimensions (H x W x D) 787 x 787 x 800 mm (31 x 31 x 31.5 in)

Net Weight 169 kg (372 lb)

Model 5403 – Wax Milling Stock Package

Quantity 100

Dimensions 127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in)

Model 5404 – Wax Milling Stock Package

Quantity 100Dimensions 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)

Model 5405 – Plexiglass Milling Stock Package

Blocks Quantity 15


Blocks Quantity 15

Dimensions 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)

Blocks Quantity 10


8/18/2019 Dsa 5600 - fresa cnc

7/12

7

SPECIFICATIONS (cont'd)


Quantity 100


Model 5407 – Engraving Plate Package

Quantity 50Dimensions 203.2 x 50.8 x 3.18 mm (8 x 2 x 0.125 in)


Quantity 25


Model 5409 – Aluminum Milling Stock Package

Quantity 50



Quantity 100


Model 5601 – Quick Tool Changing System

Master Holder for inserting quick -change end mill holders

R8 End Mil l Holders Shank Diameter 4.76 mm (3/16 in), 6.35 mm (1/4 in), two 9.53 mm (3/8 in), 12.7 mm (1/2 in)

Model 5601-10 – Quick Tool Changing SystemMaster Holder for inserting quick- change end mill holders

R8 End Mil l Holders Shank Diameter 3.18 mm (1/8 in), 6.35 mm (1/4 in), two 9.53 mm (3/8 in), 12.7 mm (1/2 in)

Model 5603 – Four-jaw Chuck

Four-jaw Chuck Chuck Diameter 89 mm (3.5 in)

Hole Diameter 25 mm (1 in)

Hold-down Set clamping accessories for installing the chuck on the mill table

Model 5604 – Milling Vise

Mill Vise Opening 98 mm (3.875 in)


Hold-down Set clamping accessories for clamping the vise on the mill table

Model 5607 – Intermediate Milling Kit

End Mills Set (single-end, two flutes) Shank Diameter Mill Diameter End Type

9.53 mm (3/8 in) 3.18 mm (1/8 in) square

9.53 mm (3/8 in) 3.18 mm (1/8 in) ball9.53 mm (3/8 in) 4.76 mm (3/16 in) square

9.53 mm (3/8 in) 4.76 mm (3/16 in) ball

9.53 mm (3/8 in) 6.35 mm (1/4 in) square

9.53 mm (3/8 in) 6.35 mm (1/4 in) ball

9.53 mm (3/8 in) 9.53 mm (3/8 in) square

9.53 mm (3/8 in) x2 9.53 mm (3/8 in) ball

9.53 mm (3/8 in) 12.7 mm (1/2 in) square

Hold-down Set clamping accessories for clamping the vise or part on the mill table

Edge Finder single 9.53 mm (3/8 in) shank, 5.08 mm diameter (0.2 in) head

R8 End Mill Holders Quantity 6

Size for 9.53 mm (3/8 in) shank end mills


Accessory T-slot cleaner

Model 5609 – Collet SetType R8

Quantity 7

Sizes 1.59, 3.18, 6.35, 7.94, 9.53, 11.11 and 12.7 mm (1/16, 1/8, 1/4, 5/16, 3/8, 7/16 and1/2 in)

8/18/2019 Dsa 5600 - fresa cnc

8/12

CNC MILL SYSTEM

MODEL 5600

SPECIFICATIONS (cont'd)

8

Model 5612-10 – End Mill Kit

End Mills Set (single-end, two flutes) Shank Diameter Mill Diameter End Type

3.18 mm (1/8 in) 3.18 mm (1/8 in) ball

9.53 mm (3/8 in) 3.18 mm (1/8 in) square

9.53 mm (3/8 in) 4.76 mm (3/16 in) square6.35 mm (1/4 in) 6.35 mm (1/4 in) ball

9.53 mm (3/8 in) 6.35 mm (1/4 in) square

9.53 mm (3/8 in) 7.94 mm (5/16 in) square

9.53 mm (3/8 in) 9.53 mm (3/8 in) square

Quantity two of each

Model 5613 – Engraving Kit

End Mills Set (double-end, two flutes) Shank Diameter Mill Diameter End Type

4.76 mm (3/16 in) 0.79 mm (1/32 in) square

4.76 mm (3/16 in) 1.59 mm (1/16 in) square

Quantity two of each


Model 5613-10 – Engraving Kit

End Mills Set (single-end, four flutes) Shank Diameter Mill Diameter End Type

3.18 mm (1/8 in) 0.79 mm (1/32 in) square3.18 mm (1/8 in) 1.59 mm (1/16 in) square

60E Single-flute Countersink Size 3.18 mm (1/8 in)

Shank 3.18 mm (1/8 in)

Model 5616 – Pneumatic Vise

Vise Jaws Operation pneumatic


Depth 9 mm (0.35 in)

Use for 50.8 mm (2 in) square parts

Vise Cylinder Type double-acting

Bore 22.2 mm (0.875 in)

Stroke 25 mm (1 in)

Pneumatic Control Box Air Supply 275 kPa (40 psig) max.

Vise Control Input connects to the solenoid driver port of the CNC Mill

Pneumatic Output Ports two; the air flow through each port can be metered manuallyModel 5660 – CNC Mill Software

Licenses Number of Users 1, 5, 10, 15, 20, 25, 30 or 35

Computer Requirements (minimum) Type Pentium II, 400 MHz

Operating system Windows® 98/ME, NT 4.0/2000, or Vista

RAM 32 MB

Graphic Card 3D

8/18/2019 Dsa 5600 - fresa cnc

9/12

4 TBE = To be established

9

ORDERING NUMBERS

120 V – 60 Hz 220 V – 50 Hz 240 V – 50 Hz

ENGLISH FRENCH SPANISH ENGLISH FRENCH SPANISH ENGLISH

5600-20 TBE4 TBE 5600-25 TBE TBE 5600-2A5600-B0 TBE TBE 5600-B5 TBE TBE 5600-BA

5403-00 5403-00 5403-00 5403-00 5403-00 5403-00 5403-005404-00 5404-00 5404-00 5404-00 5404-00 5404-00 5404-00

5405-00 5405-00 5405-00 5405-00 5405-00 5405-00 5405-005406-00 5406-00 5406-00 5406-00 5406-00 5406-00 5406-005407-00 5407-00 5407-00 5407-00 5407-00 5407-00 5407-005408-00 5408-00 5408-00 5408-00 5408-00 5408-00 5408-005409-00 5409-00 5409-00 5409-00 5409-00 5409-00 5409-005441-00 5441-00 5441-00 5441-00 5441-00 5441-00 5441-005601-00 5601-00 5601-00 5601-00 5601-00 5601-00 5601-005601-10 5601-10 5601-10 5601-10 5601-10 5601-10 5601-105603-00 5603-00 5603-00 5603-00 5603-00 5603-00 5603-005604-00 5604-00 5604-00 5604-00 5604-00 5604-00 5604-005607-00 5607-00 5607-00 5607-00 5607-00 5607-00 5607-005609-00 5609-00 5609-00 5609-00 5609-00 5609-00 5609-005612-10 5612-10 5612-10 5612-10 5612-10 5612-10 5612-10

5613-00 5613-00 5613-00 5613-00 5613-00 5613-00 5613-005613-10 5613-10 5613-10 5613-10 5613-10 5613-10 5613-105616-00 5616-01 5616-02 5616-00 5616-01 5616-02 5616-00

36189-E0 TBE 36189-E2 36189-E0 TBE 36189-E2 36189-E085977-E0 TBE TBE 85977-E0 TBE TBE 85977-E0

Table 1. Equipment Ordering Numbers (Domestic and International Markets)

NUMBER OFUSERS

120 V – 60 Hz 220 V – 50 Hz 240 V – 50 Hz

ENGLISH FRENCH SPANISH ENGLISH FRENCH SPANISH ENGLISH

1 5660-00 TBE 5660-02 5660-00 TBE 5660-02 5660-005 5660-A0 TBE 5660-A2 5660-A0 TBE 5660-A2 5660-A0

10 5660-B0 TBE 5660-B2 5660-B0 TBE 5660-B2 5660-B015 5660-C0 TBE 5660-C2 5660-C0 TBE 5660-C2 5660-C0

20 5660-D0 TBE 5660-D2 5660-D0 TBE 5660-D2 5660-D025 5660-E0 TBE 5660-E2 5660-E0 TBE 5660-E2 5660-E030 5660-F0 TBE 5660-F2 5660-F0 TBE 5660-F2 5660-F035 5660-G0 TBE 5660-G2 5660-G0 TBE 5660-G2 5660-G0

Table 2. Software Ordering Numbers (Domestic and International Markets)

8/18/2019 Dsa 5600 - fresa cnc

10/12

8/18/2019 Dsa 5600 - fresa cnc

11/12

8/18/2019 Dsa 5600 - fresa cnc

12/12

Reflecting Lab-Volt's commitment to high quality standards in product, design, development, production, installation, and service, our manufacturing and distributionfacility has received the ISO 9001 certification.

Lab-Volt reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Lab-Volt recognizes all productnames used herein as trademarks or registered trademarks of their respective holders. © Lab-Volt 2009. All rights reserved.

94010-00 Rev. E4

dsa 5600 - fresa cnc

Documents