en pishgam cv

In the name of God

Pishgam is The first knowledge base company in the field of valve industry and

member of Pardis Technology Park

Active in oil , gas and petrochemical industries.

Company Profile

Page | 1

Introduction

History:

experience of pishgam Managers in the field of valves opening to the beginning of the 70 solar elderly,

due to the increasing needs of the country, domestic companies began to work on manufacturing these products

were acting. According to the knowledge-based activities, as the first members, played a role in localizing the

products.

The first contract in designing valves family PLUG, was signed and resulted in the successful design

and prototyping of about seventy-five product families PLUG valves in sizes 1 "to" 20 classes 150, 300 and

600 were. After completion of product design, prototypes have been developed on the basis of documents,

were produced and after the tests and experiments were approved by the National Iranian Gas Company.

The company pishgam the official, was registered in 2002 in Tehran. In 2003, based on studies in the

field of market and product and based on a systematic and long-term Plan, engineering and design activities to

achieve production of industrial ball valves contract on its agenda.

Research and development as driving the company in product development, During the prototyping

program to produce knowledge and to enhance the range of products and makes the day-to-day help to increase

market share. the most important headlines of the Company are as follows:

Beginning End Plan Description 2001 2002 design andprototyped of ballvalves up to size 6 inch

Class300 for gas co Production of ball valves was created for the first time

in Iran established

2003 2006

Developing products range up to size 16 inch class 600

and producing all welded valves

production of Gearbox as operator of oil, gas and

petrochemical valves

All welded valves was produced in Iran for the first time

actuator production

was given to the partner company Pars paydar Enrgy.

2008 2010 Production of valves up to Size 8 inch in Class 900 for gas

industry The production products of this section has been done as

part of production was carried out by high pressure

products. 2011 2012 Valve production based on oil standards classes 2500

According Standard MR-0175 Samples of these products is produced

2013 2016 Production Gas Over Oil (GOO) Actuator and a

standard API 6A valve.

Production of Gas Over Oil (GOO) Actuator was in The

final stage prototyping and high pressure valves after

getting approval from prototyping and product API 6A

Ball valves contract worth 30 billion riyals concluded 2015 2017 Production of high pressure valves and valves ring

complete production technology CRA

Becoming a pioneer group in the field of valves

2017 2020 produced Valve by specific user (zero leakage, double,

high and low temperature)

Special reference to the production of valves Ball Valve

Infrastructure development company based on the creation of independent units and partners. They

can also increase the speed of growth, using market range supply a greater need in the market. The

creation of peripheral as spin-off companies to plan their development is chosen. Therefore, we can

mention the following companies active.

- Pars Paydar Energy company

- Petro pishtaz Atlas company

Page | 2

Board of Directors

Picture

Name Saeid Sadegh Mohammad

Family Jani Jani Alineghad

Position Chairman of the Board Manager Vice Chairman of the Board

Education PHD BS BS

Expertise Energy Conversion Mechanical Solid Industry

phone number +98912332310 +989121889509

e-mail [email protected] [email protected]

Sister companies Manger

Picture

Name Aliasghar Firoz

Family Galyanforoshan Akbari

Position

Managing director of Petro

Pishtaz Atlas

Managing director of Pars Paydar

Energ

education BS BS

Expertise Metallurgy Mechanical Solid

phone

number +989121976350 +989121930487

e-mail [email protected]

mailto:[email protected]

Page | 3

Factory: Golbarg-e-4 St. ,Narenjestan Blvd.,

Baharestan Blvd.,Shamsabad Industrial City,

Tehran ,Iran

Tel : (+98 - 21) 562 30 126

(+98 - 21) 562 33 641-2

Fax : (+98 - 21) 562 30 125

Introduce customer

Company has been able reference vendor list in the Ministry of Petroleum and valves

production is known as an internal reference. So, we are numerous customers have ever purchased

diverse products during the years in various projects and the company's products have been used.

Which quality of products leads to customer satisfaction and continuous have been buying. The

company is looking to expand knowledge specialization approach, is to hold Training courses for its

customers.

Page | 4

Products Company

Ball Valve

Row Product Name Technical Specifications Specific User

1

High Pressure

Valves

Size: NPS 2, 2½,3,4,6,8,10,12,14,16,18,20,24 ANSI Class 900

NPS 2, 2½, 4,6,8,10,12, 16, 20 Class 1500

NPS 2, 2½, 3, 4,6,12, Class 2500

Design Standards : ANSI/ASME B16.34/API 6D /ISO 14313

Dimension Standards : API 6D/ISO14313

Test Standards : API 6D/API 598 / ISO 14313

Marking Standards : API 6D/ISO14313

Types of Seat : Soft Seated

Connection Type: 1- Flanged ends – Ring Type joint

.According to ASME B16.5/ASME 16.47

2- Butt welding end According to ASME

B16.25`

Bore Type: 1- Reduce bore 2- Full bore

Body Type: Split body

Ball Type: Trunnion mounted

Operating device: Wrench /Gear box or Actuator Body Material: Carbon Steel / Alloy Steel

Ball Material: Carbon Steel with coating

Stem Material: Carbon Steel / Alloy Steel

Standard API

6D valves used

in refineries,

petrochemical,

Size: NPS=(2161 ∗ 116

13), 2161 , 216

9 , 381,( 38

1 ∗ 3163 ), 416

1 , ( 4161 ∗ 48

1),

(4161 ∗ 44

1) , 581, (716

1 ∗ 6), (7161 ∗ 68

3), ( 7161 ∗ 68

5) , 7161 , (716

1 ∗ 781) (For

class 2000, 3000 , 5000)

Size: NPS 11613216

1 ,2169 , 38

14161 ,(716

1 ∗ 683), 716

1 (For class 10000)

Design Standards : API 6A /ASME B16.34/

Dimension Standards : API 6ASection (10.5) /

Test Standards : API 6A (Annex F) /API 598

Marking Standards : API 6A/

Types of Seat : Soft Seated/Metal Seat

Connection Type: 1- Flanged ends – Ring Type joint .According to API 6A (Section

10.1)/ ASME B16.5/ASME 16.47

2- Butt welding end According to API 6A, Annex E/ ASME B16.25`



Operating device: Wrench /Gear box or Actuator Body Material: Material group in API 6A clause 4

Standard API

6A wellhead

valves and

used until the

refining

process

Page | 5

2

All welded

Vlave

Size: NPS 2, 2½,3,4,6,8,10,12,14,16,18,20,24 ANSI Class 900

NPS 2, 2½, 4,6,8,10,12, 16, 20 Class 1500

NPS 2, 2½, 3, 4,6,12, Class 2500

Design Standards : ANSI/ASME B16.34/API 6D /ISO 14313





Connection Type: 1- Flanged ends – Ring Type joint .According to

ASME B16.5/ASME 16.47

2- Butt welding end According to ASME B16.25`







valves

main gas

transmiss

ion lines

3

Small Ball

Valve

Size: NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 150 NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 300

NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 600

NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 800

NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 900

NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 1500

NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 2500 Design Standards : ANSI/ASME B16.34/API 6D /ISO 14313








3-thrade end

4- socketed end




Operating device: Wrench / Actuator Body Material: Carbon Steel / Alloy Steel



valves

used in

oil and

gas,

refinery

4

Split Valve

Size:

NPS 2, 2½,3,4,6,8,10,12,14,16,18,20,24,30,32,36 ANSI Class 150

NPS 2, 2½,3,4,6,8,10,12,14,16,18,20,24,30,32,36 ANSI Class 300

NPS 2, 2½,3,4,6,8,10,12,14,16,18,20,24,30,32,36 ANSI Class 600 Design Standards : ANSI/ASME B16.34/API 6D /ISO 14313














valves

used in

oil and

gas,

refinery

Page | 6

introduced the activities of research, development

As the engine driving the company's research and development department, which utilizes the forces

committed and has been able to design knowledge and BALL; PLUG valves in its compony.

Prototyping and approval as prototypes in order to obtain approval for new products has been an

integral part of work; By the Project Manager, all of the company's managerial and technical professionals;

lead in elderly.

Partner companies

Range increase production and improve knowledge and the company structure. in order to use the

infrastructure created, we established a new company with a mission to develop approaches units

defined.

Pars Paydar Energy company

Pars Paydar Energy co. started its activities in 2008 with the goal of designing and producing all kinds

of Gearbox of valves in oil and gas industry.

Gearbox of valves are generally two types of quarter round (Quarter Turn) and all round (Full Turn)

according to national and international standards are produced. Customer-satisfaction attitude of the company's

activities from the beginning has caused increasing Customers satisfactions, improving product quality,

innovation and continuous creativity, enhancing the effectiveness of technical support services healthy

competition with competitors is the most important and fundamental principles and values of the company's

activities. The main goals to satisfy all interested parties, ie customers, employees and shareholders which will

be followed by below principles.

First principle: to improve production through the creation of the necessary system requirements and

standards related to processes, activities and products.

The second principle: to provide products with competitive prices by using strategies such as reducing

waste and cycle time of the production process and improving the quality of equipment.

The third principle: innovate and deliver products with new designs with regard to views of customers.

Principle IV: improving quality of processes related to clients such as after-sales service.

The fifth principle qualification of human resources through staff continuous and effective training.

Article VI: optimal allocation of resources to achieve the goals and quality programs of products.

Page | 7

- Petro pishtaz Atlas company

Atlas co. considering the structural and managerial experience is stablished

and provides specialized services in the field of oil, gas and petrochemical

valves in the form of teamwork and quality management system.

According to standards, training, complement improve and implementation

of some important industrial process of group member companies taking agency of large international

companies repairing manufacturing and supply of oil, gas, and petrochemical industry valves through

a large network in the country is company strategy.

Fast and high precision by knowledge potential and access to critical resources and the use of existing

infrastructure in group companies, toward without factory production strategy and reduce the cost of

services is the most important competitive advantages of the company.

Because being knowledge base and doing specialized activities with the use of advanced science

and technology is important in the oil and gas and petrochemical industries; In planning goals

necessary infrastructure is considered develop in order to activities to provide better ability to

detect and respond to customers' needs.

The most important capital of the company is capable human resources which always tried to be

improved and updated knowledge and technical capacity in order to present specialized services

calmly and confidently to the customer.

most important work topics:

consulting and training services

Inspection and Technical Supervision

manufacture and supply of spare parts

improvement of of industrial valves including product changes, trim

after-sales service contracting companies

services and non-destructive testing NDT about valves Inspection

Supply valves

Manufacture of engineering components and assemblies

Page | 8

Certificates

Page | 9

Page | 10

Page | 11

Page | 12

Company Achievements

define a manufacturing company with design capabilities, manufacturing parts and product

accepted in the knowledge-based companies in vice presidency for science and technology.

earn Bronze level of Chamber of Commerce Industries and Mines

has the highest technical score in oil and gas tenders.

the first manufacturer of valves all welded valves in Iran.

the only company research and development department stablish certificate among valve

manufacturers.

member of valves specialized group of Country

The company's competitive advantage

Presence in different vendor list, product design indigenous knowledge, familiarity with the

technology and the resources required to implement the project in this field is among the most

important specific advantages. On this basis in the company's development according to long-

term goals has led to the resources required these goals; Before the start of projects, required

supply to accelerate the company's development activities, including human resources and

equipment needed these resources can be cited.

Page | 13

Having experienced team in the field of design, engineering and manufacturing of ball valves are

the most important advantage compared to other competitors have the ability to localize

knowledge completely.

Special equipment testing

In 2013, high-pressure testing machine with 145 thousand euros was purchased for testing of

high pressure products. this device is the list of required equipment available.

Page | 14

Special equipment for assembly and welding

Equipment for the assembling valves up to size 36 inches and corrosion resistant alloys Overlay

coverage exits in companies And it's one of the most important, ability to produce high weight

products.

workshop space

The total area of 5300 square meters of production units

The number of production units: 3 unit

Production area: 2600 square meters

Offices and service area: 1300 square meters

Open warehouse area: 1,000 sq. M.

en pishgam cv

Documents