estimating fugitive dust emission rates using an environmental boundary layer wind tunnel
DESCRIPTION
Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel. Jason A. Roney , Bruce R. White. 2012/04/30 報告人:趙彥勛. Outline. Introduction Experimental methods Results Conclusions. Introduction. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/1.jpg)
Jason A. Roney , Bruce R. White
Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel
2012/04/30報告人:趙彥勛
![Page 2: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/2.jpg)
Outline
2
Introduction
Experimental methods
Results
Conclusions
![Page 3: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/3.jpg)
3
The measurements made in this paper allow for systematic determination of PM10 emission rates through the use of an environmental boundary layer wind tunnel in the laboratory.
PM10 (particulate matter with sizes of 10 μm aerodynamic diameter)
Introduction
![Page 4: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/4.jpg)
Overview of methodology
4
The primary goal of the research presented in this paper is to describe a novel methodology for determining fugitive dust emission rates using an environmental boundary layer wind tunnel in the laboratory.
A case study involving Owens (dry) Lake soils is used to exhibit the methodology.
![Page 5: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/5.jpg)
Overview of methodology
5
Through wind erosion analysis of four soils in a laboratory wind tunnel, quantification of the emission rates of dust, specifically, PM10 at Owens (dry) Lake are estimated using a novel approach.
![Page 6: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/6.jpg)
Emission rates and dust suspension
6
The emission rate is defined as the amount of mass suspended per unit area of surface soil per unit time.
Dust < 50 μm, Sand > 50 μm (Lancaster and Nickling, 1994)
Long-term suspension of dust is estimated for diameters < 20 μm (Pye, 1987)
PM10 has the potential for long-term suspension.
![Page 7: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/7.jpg)
Emission rates and dust suspension
7
Suspension and production of dust occurs through two mechanisms:
1.Abrasion 2.Through the direct action of the wind on the surface.
Abrasion can occur through saltation while wind forces cause both wind shear and turbulent shear (Braaten et al., 1993)
![Page 8: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/8.jpg)
Emission rates and dust suspension
8
The vertical flux of dust :
In this paper we will use the vertical flux of dust to provide a comparison between our data and existing field data.
![Page 9: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/9.jpg)
Experimental methods
9
Soil collection rationale and preparation
![Page 10: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/10.jpg)
10
Jason A. Roney, Bruce R. White (2004) Definition and measurement of dust aeolian thresholds F01013
Wind tunnel
![Page 11: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/11.jpg)
11
Wind tunnel
![Page 12: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/12.jpg)
Wind tunnel
12
![Page 13: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/13.jpg)
13
Schematic representing the method of determining loose soil emission rates with a control volume.
Loose soil emission measurements
![Page 14: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/14.jpg)
14
Emission rate equation
![Page 15: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/15.jpg)
Sand flux
15
![Page 16: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/16.jpg)
Results
16Fig. 3
![Page 17: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/17.jpg)
17Fig. 5
![Page 18: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/18.jpg)
18Fig. 4
![Page 19: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/19.jpg)
19Fig. 6
![Page 20: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/20.jpg)
20Fig. 7
![Page 21: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/21.jpg)
21Fig. 8
![Page 22: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/22.jpg)
22Fig. 9
![Page 23: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/23.jpg)
23
Sand ripples in wind tunnel photograph (2012/03/18) by Chao Yen Hsun
![Page 24: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/24.jpg)
24Fig. 10
![Page 25: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/25.jpg)
25Fig. 11
![Page 26: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/26.jpg)
26Fig. 12
![Page 27: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/27.jpg)
27Fig. 13
![Page 28: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/28.jpg)
28Fig. 14
![Page 29: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/29.jpg)
Conclusions
29
Though the variables are numerous, the wind tunnel proved to be a significant aid in quantifying conditions for high emissions.
First order conditions (wind, surface roughness, and soil types) similar to those at Owens (dry) Lake were matched and emission rates established for each of the four soils.
![Page 30: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/30.jpg)
Conclusions
30
A ratio of horizontal PM10 flux FH to the total soil flux qtot (sand and dust) was calculated and plotted for all the cases. The wind-tunnel results for this ratio as well as the vertical flux ratio compare favorably with the field techniques of Niemeyer et al. (1999) (sun photometer) and Gillette et al. (1997a) (multiple on-lake monitoring sites) at Owens (dry) Lake.
The wind tunnel, thus, provides comparable data to two separate field techniques and can be applied systematically without relying on the variability of the wind, making this technique invaluable in assessing the potential emissions of fugitive dusts.
![Page 31: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/31.jpg)
Conclusions
31
Fetch effect studies were conducted to observe the development of emissions along the test bed.
The height limitation of the wind tunnel can also aid in reaching this saturation. The fetch effect is critical in estimating emissions at Owens (dry) Lake as well.
This study shows that it is unlikely that PM10 emissions rate will continually increase across an erodible surface, but may instead reach saturation states.
![Page 32: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/32.jpg)
Conclusions
32
This is contrary to the Owen effect as described in Gillette et al. (1997b), which states that the horizontal mass flux or saltation should increase over the fetch, and as a result the dust emissions should also increase. However, in Gillette et al. (1997a), an increasing measured saltation rate was measured along a 100m fetch at Owens (dry) Lake, but dust emissions decreased in the first 50m before recovering.
The wind tunnel experiments may be exposing a near-surface saturation effect that may also occur on the playa as well.
![Page 33: Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel](https://reader035.vdocuments.pub/reader035/viewer/2022062815/56812fa0550346895d951edb/html5/thumbnails/33.jpg)
Thanks for your attention !
33