grantex brochure 2016

LONG RAKE SPARSuppliers of Specialist Decorative Aggregates since 1867 2n

d E

ditio

n 20

16

J83293_Grantex Brochure.qxp 22/04/2016 11:46

Long Rake Spar is the UK’s leadingsupplier of dried aggregate granulesto the resin surfacing industry.

Industry Sectors 3

Technical Data Explained 4

Aggregates for Resin Bound and Bonded Surfacing 5

Fillers for Bound Systems 9

Aggregates for Tree Pits and Porous Systems 10

Aggregates Used in Highway Applications 12

White Dolomite for White Lining 14

SightGRIP Anti-Slip Surface Coatings 15

Slip Resistant Treads 16

Coloured Quartz 16

Aggregates and Sands for Resin Flooring 17

Sands and Powders 18

Aggregates for Grouts, Renders and Cementitious Formulations 20

Aggregates Used for Bridge Jointing 21

Technical Data Sheet 22

We have gained national and worldwide status as the chosen supplier fordecorative aggregates within the resin industry. This reputation has been gained as a result of high quality products with unparalleled levels of service in supplyingthe UK’s major resin manufacturers and contractors over several decades. Our comprehensive selection of natural coloured aggregates and gravels areavailable in numerous sizes and offer an extensive range of functional andaesthetically pleasing finishes for all sectors of the resin surfacing industry.

Long Rake Spar is one of the largest independent importers of specialiseddecorative aggregates in the UK, with many of our products sourced via exclusivesupply arrangements worldwide. These products are then processed at ourYoulgrave works where they are washed, dried and screened to produce thehighest specification dried aggregate granules.

The flexibility and suitability of our products enable them to encompass anextensive scope of industry sectors from small domestic schemes to large social housing and multi million pound commercial projects. Our products havebeen chosen within many prestigious projects including Royal Estates, sites ofspecific national heritage and the Olympic Park. They have also been chosen fornumerous Premiership football grounds and country heritage parks together withboth commercial and public amenity areas.

The continuity and assurance in supply of our products has been a key factor in developing long standing relations with the UK’s largest resin companies. These strategic partnerships have enabled us to jointly promote the systeminternationally, enabling our export markets to increase as the system becomesincreasingly popular in Europe, Scandinavia, the Middle East and the US.

Our environmental policy dictates that we only supply ethically sourced materials from sustainable deposits beingoperated within current legislative and ecological parameters. We also undertake to source recycled products orindustrial bi-products for relevant applications where ever possible.

J83293_Grantex Brochure.qxp 25/04/2016 13:17 Page 2

Order now: Call: 01629 636210 Fax: 01629 636247 or Email: [email protected]

Industry SectorsResin Bound & Bonded Surfacing

Highly decorative products have been used extensively within resin bound and bonded surfacing schemes where a seamless slip resistant finish is required that is both hard wearing andaesthetically pleasing. This decorative range of products ispromoted extensively through contractors, resin manufacturers andsurfacing companies who combine all the relative components toprovide resin bound or bonded surfacing schemes to architects,specifiers and members of the public.

Highway Applications

A range of Bauxites, Granites, Basalts and Slags are available invarious colours and grades, providing an extensive selection of highPSV products suited to, high friction anti-skid surfacing, trafficcalming and lane demarcation schemes. Our products are alsoused within Bridge Jointing repairs where a larger grade of chippingwith high strength and durability values are required.

Anti-Slip Surfacing

Many footbridges, ramps, walkways, wooden decking and treadson exterior steps now include areas of fine aggregate granules to combat the risk of slipping. Increasingly more and more of ourhard wearing products are being applied to these types of surfacesto provide grip and minimise the risk of slip hazard.

White Lining

As significant importers of pure white dolomite, we can offer a selection of fine grade powders, sands and granules for the white lining industry, all of which are subject to stringent testing to ensure brightness values comply with required specifications.

Resin Flooring & Stone Carpets

A selection of closely sized quartz granules and specialist sandsare utilised in resin flooring for both internal and externalapplications, where a seamless hard wearing finish is required.Resin flooring is becoming increasingly popular in both industrialand commercial markets, due to its hygienic, slip-resistant anddecorative finish, available in a large choice of colours.

Terrazzo

Our products are used with seamless, resin-based andcementitious in-situ terrazzo systems, and cement based terrazzotiles, to provide a polished decorative aggregate finish, ideallysuited to large scale commercial projects, public amenity areas orretail showrooms.

Car Park Deck Waterproofing Systems

We supply a range of specialist sands and fillers for use within resinsystems to provide a waterproof and slip-resistant finish for roofingand car park deck systems.

Dry Dashing

A variety of our products are supplied to produce a highlydecorative, durable, exposed textured finish for polymer resin clad panels for the modular building industry.

Specialist Concrete

A selection of dried gravels, granites and finely graded sands areutilised in the production of specialist cementitious or polymerbased blends. Products are chosen for both their aesthetic qualitiesto add colour and texture, but also to improve physicalcharacteristics of the blend, such as strength and ease of flow.White Dolomite is used in the production of both architectural caststone and kerbs or tunnel linings where increased light reflectanceis required to improve traffic safety.

White Renders, Mortars & Paint

White Dolomite granules and powders can be used in theproduction of white cement based renders to provide either a cleanwhite render or for a through coloured render.

Bespoke Contract Drying

We undertake various contract drying, blendingand screening specific to customers’ bespokeproduct requirements. Please contact a memberof our sales team for further information.

How to order:How to order:Call: Call: 01629 63621001629 636210

Fax: Fax: 01629 63624701629 636247 or or Email: Email: [email protected]@longrakespar.co.uk

Our comprehensive range of decorative aggregates is available in our NaturalSelection brochure.

Get your copy online atwww.longrakespar.co.uk

Technical Data ExplainedOur extensive product selection offers a vast choice of colours, sizes, textures and decorative finishes for the resin surfacingindustry. However as our products encompass an extensive market sector, it is important to understand the part aggregatesplay in ensuring the suitability, performance and life expectancy of the finished surface. Where applicable, industryrecognised full technical data is supplied and listed for the majority of our products. A brief explanation of these industrystandards is listed below. However to further assist as a guide to the products suitability, and where industry data is notavailable, we have included a number index rating between 1 and 5 for all of our products, defined in the table below.

Product only suited for use within bound systems,Product only suited for use within bound systems,for foot traffic use.for foot traffic use.

Product suited to all bound systems and bondedProduct suited to all bound systems and bondedsystems primarily for foot trafficked areas or areas ofsystems primarily for foot trafficked areas or areas ofoccasional domestic, light traffic.occasional domestic, light traffic.

Product suited to all bound and bonded systemsProduct suited to all bound and bonded systemssubject to a medium degree of vehicular traffic,subject to a medium degree of vehicular traffic,including vans but not heavy goods.including vans but not heavy goods.

Product suited to all bound and bonded systemsProduct suited to all bound and bonded systemssubject to heavy wear from continual traffic includingsubject to heavy wear from continual traffic includingvans and medium weight goods vehicles.vans and medium weight goods vehicles.

Product suited to all bound and bonded systemsProduct suited to all bound and bonded systemssubject to heavy wear from all forms of transportsubject to heavy wear from all forms of transportincluding heavy goods.including heavy goods.

1

5

4

3

2

Suitability NoteSome of the gravel and shingles supplied mayoccasionally contain very minor concentrations of ironminerals, which upon weathering may result in areas ofrust staining. These iron minerals occur naturally withinthe gravel deposits, and Long Rake Spar cannot be heldresponsible for any loss or damage suffered as a result of rust staining. By way of guidance to users of ourproducts we have included the risk of iron staining (RIS) assessment on our range of gravels and shingles. This guide is purely a subjective assessment, based onour own experience with these products and may besubject to change as our database expands. The scale is defined as follows:* No likelihood of any rust staining** No previous recorded instances of rust staining

within this product*** Potential for rust staining within this rock type

with recorded instances.

Performance IndexPerformance Index

PSV = Polished Stone ValueThe resistance of an aggregate to polishing and therefore a measure of skid resistance. PSV should not be viewed in isolationas aggregates with a high PSV may be likely to abrade easily (high AAV). PSV values in excess of 58 are generally acceptable for highway wearing courses.

SRV = Skid Resistance ValueA measure of the skid resistance of aggregate within the texture of a system. The greater the value the higher the skid resistance.

AAV = Aggregate Abrasion ValueThe resistance of an aggregate to abrasion. The lower the AAV, the more resistant the aggregate is to wearing. Values of less than16 are acceptable for highway wearing courses.

AIV = Aggregate Impact ValueThe resistance of an aggregate to impact stress produced from a moving vehicle. Values of less than 20 are acceptable for highwaywearing courses.

ACV = Aggregate Crushing ValueThe resistance of an aggregate to crushing. The lower the ACV, the more resistant the aggregate is to crushing.

LA = Los Angeles CoefficientThe resistance to fragmentation is a measure of the toughness of an aggregate and is viewed as a representative measure of both degradation and crushing stress values. Values of less than 30 are acceptable for highway wearing courses.

Product ConformityAll images displayed in this product brochure are displayed wet, tosimulate their appearance when used in resin. Please note that whilstevery care is taken to provide an exact indication of the colours ofour products, these aggregates are naturally found products whichmay be subject to changes in appearance, colour and sizebetween process batches. It is therefore strongly recommended torequest a product sample prior to any work being undertaken.

PackagingWe supply an extensive range of our products in various bag weightsto assist with the formulation of composite batches and to meet thedemands of the varying resin systems. Our products are alsoavailable in bulk bags or tanker loads, subject to prior arrangement.

Technical Data SheetsWe supply full technicaldata, including grading,physical and chemicalanalysis on our fullproduct range whichcan be downloadeddirectly from ourwebsite or requestedvia a member of oursales team.

Aggregates for Resin Bound Aggregates for Resin Bound & Bonded Surfacing & Bonded Surfacing


Bound Resin SystemsThe main characteristic of a resin bound system is theuniform, smoothed flat appearance of the finished surface. It provides a low maintenance surface that is porous/semiporous and hard wearing yet flexible and resistant tocracking. The system is applied by mixing the resin and aggregate together to form one combined blend whichis then applied directly onto a hard wearing surface where it is trowelled flat to provide a smooth and uniform finishedsurface. Any of our products can be incorporated into thistype of system, with most forming part of a more intricateblend, designed by customers wishing to offer a moreunique choice of colours and textures. Aggregates with a suitability value of 1 can only be incorporated within abound system for areas of foot traffic and prudently theseproducts should be mixed with harder wearing aggregatesto increase the overall performance of the system. ResinBound Systems are recognised as being SUDS compliantand this resin system is also adapted for free draining TreePit Schemes where a larger grade of aggregate is used.

Bonded Resin SystemsA bonded system, where the aggregate is scattered directlyonto a top surface of resin, is designed to simulate theappearance of loose gravel with a more rustic texturedfinish. A low maintenance, hard wearing surface is achieved,however the system is laid much more thinly with the top layer of aggregate exposed and only part of the stone bonded within the resin. It is therefore moreimportant to select an aggregate with sufficient wearingproperties for each specific application, particularly in areaswhich may be subjected to vehicular traffic. Please refer to our suitability guide with products requiring a value of 2 or above for this type of system. Resin Bonded Systemsare not SUDS compliant.


AUTUMN GOLD

Product Size 1-3mm & 2-5mm PSV 54

Durability LA 38 Shape Angular

Rock Type Quartz RIS **

Performance 3

AMBER GOLD

Product Size 1-4mm PSV 54 Est

Durability Moh 6 Shape Angular

Rock Type Flint Shingle RIS ***

Performance 3

BLACK BASALT



Rock Type Basalt RIS *

Performance 5

BRITTANY BRONZE

Product Size 1-3mm & 2-5mm PSV 50 Est

Durability Moh 6 Shape Well Rounded

Rock Type Quartzite RIS ***

Performance 3

WHITE GRIP CCKC



Rock Type Calcined Kaolinite RIS *

Performance 5

BALTIC BLUE



Rock Type Greywacke RIS *

Performance 5

CORN FLINT DANISH QUARTZ


Durability Moh 7 Shape Rounded


Performance 4

DOBBSWEIR



Rock Type Quartzite RIS **

Performance 3


Durability Moh 6 Shape Angular /Smooth

Rock Type Marine Flint Shingle RIS ***

Performance 2

Resin Bound & Bonded Products



HM QUARTZ


Durability Moh 7 Shape Slightly Rounded

Rock Type Alluvial Quartz RIS **

Performance 3

GOLDEN QUARTZ


Durability Moh 7 Shape Slightly Rounded


Performance 3

DORSET GOLDEN PEA

Product Size 1-3mm & 2-5mm PSV N/A



Performance 3

GREEN GRANITE

Product Size 2-5mm PSV 62

Durability AAV 6.6 Shape Angular

Rock Type Dolerite RIS *

Performance 5

GREEN GRANITE



Rock Type Diabase RIS *

Performance 5

MULTI FLINT



Rock Type Calcined Flint RIS *

Performance 3

RED GRANITE


Durability AAV 2 Shape Angular

Rock Type Granite RIS *

Performance 5

IVORY

Product Size 1-3 & 2-5mm PSV N/A

Durability Shape Angular

Rock Type Ceramic RIS *

Performance 4


RHINE GOLD


Durability Moh 7 Shape Semi Rounded


Performance 3


Product Size 3-6mm PSV N/A

Durability Shape Mainly Rounded

Rock Type Alluvial Quartzite Shingle RIS ***

Performance 2


SILVER GREY




Performance 4

TRENT PEA GRAVEL


Durability Moh 7 Shape Rounded and Angular

Rock Type Glacial Quartzite RIS **

Performance 3

STAFFS PINK




JEREZ YELLOW

Product Size 1-3mm & 2-5mm PSV N/A


Rock Type Marble RIS *

Performance 1

BEIGE




Performance 1

WHITE DOLOMITE




Performance 1

Filler Filler

GLASS GRIT

Product Size 0.2-0.6mm PSV N/A

Durability Shape Semi-rounded

Rock Type Glass RIS

Performance N/A

Sand

CHINO CREAM




Performance 1

Filler

ICE BLUE




Performance 1

FillerFiller

C16/30

Product Size 0.5-1mm PSV N/A

Durability Moh 7 Shape Semi-rounded

Rock Type Quartz Sand RIS *

Performance N/A

C52




Performance N/A

C8/16




Performance N/A

Sand SandSand

Fillers for Bound SystemsThe products denoted as fillers are marble, and are therefore only suitable for use withinresin bound or internal flooring systems where the aggregate is blended within the resin.

A selection of cost effective kiln dried sands may be included within resin systems to adda degree of slip resistance.


CORN FLINT


Durability Moh 6 Shape Angular /Smooth

Rock Type Marine Flint Shingle RIS ***

Performance 2

BRITTANY BRONZE



Rock Type Quartzite RIS ***

Performance 3

Aggregates for Tree Pits & Porous SystemsA selection of products in a 6-10mm grades are supplied into SUDS compliant tree pits and porousresin systems. These larger grades of aggregate provide a more open texture that enables water to penetrate through the exterior surface to create a fully porous system.

DORSET GOLD




Performance 3



IVORY


Durability Shape Angular

Rock Type Ceramic RIS *

Performance 4

BLACK BASALT




Performance 5

RED GRANITE




Performance 5

RHINE GOLD




Performance 3

SILVER GREY




Performance 4

TRENT PEA GRAVEL




Performance 2

Tree Pits

All of these gravels create an All of these gravels create an open texture that enables water open texture that enables water to penetrate through the exteriorto penetrate through the exteriorsurface, making it a fully poroussurface, making it a fully poroussystem which is SUDS compliant.system which is SUDS compliant.


As associate members of the RSMA we work closely with the UK’s leading anti-skidsurfacing companies supplying an extensive range of high performance Bauxites, Granites,Basalts and Slags in a variety of colours and sizes. These products are frequently specifiedwithin high friction surfacing schemes because of their high skid resistance and durabilityvalues, whilst also providing a long lasting consistent colour for traffic management

applications. We also work with some of the UK’s principal civil engineering and construction companieswhere a selection of our single sized larger grade granites deliver high strength and durability values foruse within other highway associated works such as bridge jointing repairs.

As one of the UK’s principal importers of White Dolomite chippings, granules and powders, we supply avariety of accurately sized pure white granules into the UK’s white lining industry. Certificated brightnessvalues are available on request.

As manufacturers of the SightGrip Products we now offer a range of coloured Bauxites and Granites.These coloured aggregates are hard wearing, skid resistant and provide high visibility.

For our extensive range of closely sized quartz sands and powders that are supplied as fillers inthermoplastic ad-mixtures, please see page 18.

Aggregates Used in Highway Applications



WHITE GRIP CCKC

Product Size 0.2-0.5, 0.5-1, 1-2mm PSV 74



Performance 5

COPPER SLAG

Product Size 1-2mm SRV 76


Rock Type Iron Silicate RIS *

Performance 5

BALTIC BLUE



Rock Type Greywacke RIS *

Performance 5

DARK RUBY

Product Size 1-3, 3-5 & 3-7mm PSV 71


Rock Type Chrome Slag RIS *

Performance 5

BLACK BASALT




Performance 5

GREEN GRANITE




Performance 5

GREEN GRANITE



Rock Type Diabase RIS *

Performance 5

CHINESE BAUXITE GREY

Product Size 0.9-1.4 & 1-3mm PSV 72


Rock Type Calcined Bauxite RIS *

Performance 5

CHINESE BAUXITE BUFF

Product Size 0.9-1.4 & 1-3mm PSV 72



Performance 5

Highways Range


Highways Range

Product Size 0-0.5mm & 0-1mm

Brightness Value = L*97


Rock Type Dolomite RIS *

Performance 1

WhiteDolomite for WhiteLiningAs a substantial importer of purewhite dolomite, we can supply an extensive selection of dried,accurately sized fines and mini-granules for the white liningindustry. Certification of brightnessvalue is available on request.

WHITE DOLOMITE

SILVER GREY GRANITE




Performance 4

RED GRANITE




Performance 5

GUYANAN BAUXITE

Product Size 0.9-1.4mm & 1-3mm PSV 71



Performance 5



Anti-Slip Surface CoatingsCOLOUR COATED AGGREGATES FOR DEMARCATION APPLICATIONSA selection of high specification pigmented aggregate granules are supplied into traffic demarcation applications in both footand road grade. This collection of six core industry colours can be replicated onto a selection of Bauxites, high performanceGranites or White Grip, all giving slightly different colour density and performance values. Slight variations in colour mayresult from the inherent colour difference in the naturally occurring base material.

Product Code PSV AAV

Baltic Blue BB 66 3.2Buff Chinese Bauxite BCB 72 1.3Grey Chinese Bauxite GCB 72 2.6RASC Guyanan Bauxite RGB 71 1.6High PSV UK Granite HPG 67 1.3White Grip WG 78 0.4

Nominal Size Grade

0.90 - 1.40mm Foot Grade1.00 - 3.00mm Road GradeOther sizes are available

RED ON GCB

RED ON HPG

BLUE ON GCB

BLUE ON HPG

JADE ON GCB

JADE ON HPG

GREEN ON HPG

YELLOW ON BCB

BLACK ON GCB

BLACK ON HPG

BLUE ON WG

RED ON BCB

Highways Range

UVStable


Coloured Quartz Product Size 0.4-0.8, 0.8-1.2, 2-3 PSV 50 Est 3-5mm



Performance 3

DARK BLUE

LIGHT BLUE

A selection of pigmented Quartz is supplied in various grades ranging from 0.4-3.5mmwith an extensive choice of colours available. These products can be used externallywithin decorative resin surfaces or internally within seemless resin floor screeds.

BLACK

GREYRED

PURPLE

BROWN

GOLD

YELLOW

IVORY

DARK GREEN

LIGHT GREEN

Fine grade bauxite is predominantly applied tovarious surface substrates like decking, exteriorsteps, bridges or steep inclines to provide adegree of slip resistance to the finished surface.

Slip Resistant TreadsCHINESE BAUXITE BUFF GUYANAN BAUXITE




Performance 5




Performance 5

CHINESE GREY




Performance 5


Aggregates and Sandsfor Resin Flooring

As associate members of FeRFA we work closely with the UK’s resinAs associate members of FeRFA we work closely with the UK’s resinflooring companies to supply a variety of decorative finishes for useflooring companies to supply a variety of decorative finishes for usewithin interior or exterior resin flooring applications. The aggregates usedwithin interior or exterior resin flooring applications. The aggregates usedin any flooring system are often the most critical, yet underestimated in any flooring system are often the most critical, yet underestimated

part of the system, providing strength, colour and often physical properties that are part of the system, providing strength, colour and often physical properties that are pre-requisite to ensure the lifespan of the resin floor finish. As almost any of our driedpre-requisite to ensure the lifespan of the resin floor finish. As almost any of our driedaggregates can be utilised to create an exposed, decorative, hard wearing, functionalaggregates can be utilised to create an exposed, decorative, hard wearing, functionalfinish, it is imperative to seek technical advice to ascertain which aggregates are suitedfinish, it is imperative to seek technical advice to ascertain which aggregates are suitedto which systems (FeRFA types 1-8). Fine grade sands are used within resin flooring to which systems (FeRFA types 1-8). Fine grade sands are used within resin flooring or car park decking systems as they provide a textured surface which serves as anor car park decking systems as they provide a textured surface which serves as anintegral key between the layers. Please see our range of kiln dried sands suited tointegral key between the layers. Please see our range of kiln dried sands suited toflooring on page 18 & 19. flooring on page 18 & 19.


Sands & Powders

SILICA SAND 30




Performance N/A

SILICA SAND 8/16




Performance N/A

SILICA SAND 16/30

Product Size 0.5-1mm PSV N/A



Performance N/A

SILICA SAND 110




Performance N/A

SILICA SAND 52




Performance N/A

SILICA SAND 95




Performance N/A

A selection of cost effective kiln dried sands in various grades areA selection of cost effective kiln dried sands in various grades areincluded within resin systems to add a degree of slip resistance. included within resin systems to add a degree of slip resistance. Dried sands are also used to provide a receiving key between systemDried sands are also used to provide a receiving key between systemlayers and existing surfaces. layers and existing surfaces.

Most resin systems incorporate powders and dolomite fines as bulkMost resin systems incorporate powders and dolomite fines as bulkextenders or colour receivers. extenders or colour receivers.

We offer the facility to contract blend any of our sands and powders We offer the facility to contract blend any of our sands and powders to comply with stringent customer specifications.to comply with stringent customer specifications.

QUARTZ SAND

Product Size 0.3-0.8 & 0.7-1.2mm PSV 50 Est



Performance N/A

GLASS GRIT


Durability Shape Semi-rounded

Rock Type Glass RIS

Performance N/A

WHITE DOLOMITE FINES

Product Size 0-1, 0-2mm

Durability Moh 3 PSV N/A

Rock Type Dolomite Shape Angular

Performance N/A RIS *

WHITE GRIP CCKC

Product Size 0.2-0.5mm, 0.5-1mm PSV 78 1-2mm

Durability AAV 0.4 Shape Angular


Performance N/A

WHITE DOLOMITE GRANULES

Product Size 0-0.5, 0.5-1,0.3-0.7, 1-1.5, 1-2mm

Durability Moh 3 PSV N/A

Rock Type Dolomite Shape Angular

Performance N/A RIS *

Sands & Powders

Product Name Size Durability Shape

Moh PSV AAV LA

Amber Gold 1-4mm 6 54 Est Angular

Autumn Gold 1-3mm & 2-5mm 54 0.6 38 Angular

Baltic Blue 1-3mm & 2-5mm 7 66 3.2 Angular

Black Basalt 1-3, 2-5, 6-10, 14mm & 20mm 60 4.2 18 Angular

Brittany Bronze 1-3, 2-5 & 6-10mm 6 50 Est Well Rounded

White Grip CCKC 0.2-0.5, 0.5-1, 1-2 & 1-3mm 8 78 0.4 Angular

Chinese Bauxite Buff 0.9-1.4 & 1-3mm 9 72 4 Angular

Chinese Bauxite Grey 0.9-1.4 & 1-3mm 9 72 1.8 Angular

Corn Flint 1-3mm, 2-5mm & 6-10mm 6 35 Est Angular /Smooth

Copper Slag 0.2-0.7 & 1-2mm 7 76 SRV Angular

Danish Quartz 1-3mm & 2-5mm 7 50 Est Rounded

Dark Ruby 1-3mm, 3-5 & 5-7mm 8 71 Angular

Dobbsweir 3-6mm 6 35 Est Angular

Dorset Golden Pea 1-3mm 2-5mm & 6-10mm 7 Well Rounded

Golden Quartz 1-3mm & 2-5mm 7 50 Est Slightly Rounded

Green Granite 1-3mm 67 10 Angular

Green Granite 0-2m & 2-5mm 62 6.6 Angular

Green Granite 14mm & 20mm 63 4 12 Angular

Guyanan Bauxite 0.9-1.4 & 1-3mm 9 71 3.5 Angular

H M Quartz 1-3 & 2-5mm 7 50 Est Slightly Rounded

Ivory 1-3, 2-5mm & 6-10mm Angular

Multi Flint 1-3mm 7 44 3 Angular

Red Granite 1-3, 2-5, 6-10, 14mm & 20mm 53 2 Angular

Rhine Gold 2-5mm & 6-10mm 7 50 Est Semi Rounded

Silver Grey 1-3mm, 2-5mm & 6-10mm 54 3.3 28 Angular

Staffs Pink 3-6 7 35 Est Rounded and angular

Trent Pea Gravel 3-6mm & 6-10mm Mainly Rounded

Fillers

Beige 1-3mm & 2-5mm 4 Angular

Chino Cream 1-3mm 4 Angular

Ice Blue 2-5mm 3 Angular

Jerez Yellow 1-3mm & 2-5mm 4 Angular

Limestone 2-4mm 4 Angular

Clear Glass Grit 0.2-0.6mm 4 Semi Rounded

Sands

Silica Sand 110 # 0.075-0.2mm 7 Semi Rounded




Silica Sand 16/30 # 0.5-1mm 7 Semi Rounded

Silica Sand 8/16# 1-2mm 7 Semi Rounded

Quartz Sand 0.3-0.8 & 0.7-1.2mm 7 50est Semi Rounded

White Sands & Powders

White Dolomite Granules 0-0.5, 0.5-1,0.3-0.7, 1-1.5, 1-2mm 3 Angular

White Dolomite Fines 0-1 & 0-2mm 3 Angular

Rock Type Performance RIS No Of *Scale

Page 22

Res

in B

oun

d

Res

in B

ond

ed

Hig

hw

ays

& A

nti-

Ski

d

Wh

ite L

inin

g

Bri

dg

e Jo

intin

g

Tree

Pits

Res

in F

loo

ring

&S

eam

less

Ter

razz

o

Sto

ne C

arp

ets

Ext

erna

l Sur

faci

ng

& W

ater

pro

ofin

g

Sp

ecia

list

Co

ncre

te

Ren

der

s M

ort

ars

& P

aint

s

Flint Shingle 3 *** l l

Quartz 3 ** l l l l

Greywacke 5 * l l l

Basalt 5 * l l l l

Quartzite 3 *** l l l l l

Calcined Kaolinite 5 * l l l l l l l

Calcined Bauxite 5 * l l l l

Calcined Bauxite 5 * l l l l

Marine Flint Shingle 2 *** l l l l

Iron Silicate 5 * l l l

Quartz 4 ** l l l l

Chrome Slag 5 * l l l

Quartzite 3 ** l l

Quartzite 3 ** l l l

Quartz 3 ** l l l

Diabase 5 * l l l l l l

Dolerite 5 * l l

Dolerite 5 * l

Calcined Bauxite 5 * l l l

Alluvial Quartz 3 ** l l

Ceramic 4 * l l

Calcined Flint 3 * l l l l

Granite 5 * l l l l l l

Quartz 3 ** l l l l

Granite 4 * l l l l l l l

Glacial Quartzite 3 ** l l

Alluvial Quartzite Shingle 2 *** l l l l

Marble 1 * l l

Marble 1 * l l l

Marble N/A * l l l

Marble 1 * l l

Limestone N/A * l l l l

Glass N/A l l l

Quartz Sand N/A * l l l l

Quartz Sand N/A * l l l l

Quartz Sand N/A * l l l l l l

Quartz Sand N/A * l l l l l




Dolomite N/A * l l l l

Dolomite N/A * l l l l

TRENT PEA GRAVEL




Performance 2

RHINE GOLD




Performance 3

DANISH QUARTZ




Performance 4

GREEN GRANITE


Durability AAV7 Shape Angular


Performance 5

DORSET GOLD




Performance 3

WHITE DOLOMITE

Product Size 0-1mm, 0-2mm & 1-2mm

Brightness Value = L*97


Rock Type Dolomite RIS *

Performance N/A

Aggregates for Grouts, Rendersand Cementitious FormulationsA selection of products, chosen for their aesthetic qualities of colour and texture, whilst also aiding the performance orthe physical characteristics of a blend, such as the strength or ease of flow. This selection of alluvial gravels, fine gradedusts and granules are used within polymer concrete, as fillers or whitening agents in grouts, mortars and renders andcan be supplied independently or as part of a blend with other components.

Page 20

BLACK BASALT

Product Size 14mm & 20mm PSV 60



Performance 5

RED GRANITE




Performance 5

GREEN GRANITE



Rock Type Dolorite RIS *

Performance 5

Aggregates used for Bridge JointingA selection of our washed granites service the bridge jointing industry, whereappearance of the stone is not of primary importance, more the physicalproperties of the aggregates strength and performance.

Page 21


Long Rake Spar Co Ltd Youlgrave, Nr. Bakewell, Derbyshire DE45 1LWTel: 01629 636210 Fax: 01629 636247 Email: [email protected]

Our thanks go to Addagrip, Cirencester CivilEngineering, Ronacrete, SureSet, Total Protection,Triflex and Wavin for the use of their images in theproduction of this brochure.

EST 1867

Our commitment to excellence: • Efficient, friendly service • Supply of the highest quality products

• Competitive pricing • Development of new products

• On time deliveries • Full technical support

Designed by www.grafika-uk.com © 2016. g/jwn


grantex brochure 2016

Documents