1. HP ProCurve A SeriesConfiguration Howto 2011/10/25 Akira Tsumura at ILO,Inc. < a.tsumura@ilo.co.jp > with Hewlett-Packard.S

2. ProCurve AS H3C L2/L3S ProCurve AS Hewlett-Packard 3. ProCurve AS CLIH3CCLI ProCurve ECisco LikeS S CLI 4. S RJ45Cisco ProCurveRJ45 Juniper, SunS 9600bps 8bit 1bit S BackSpaceDelete 5. [H3C vlan 1] # vlan 1(e.x.) quit[H3C] System-view quit super quit Login Logout 6. IPVlan1172.16.1.251/24[H3C] interface Vlan-Interface 1[H3C-Vlan-interface1]ip address 172.16.1.251 255.255.255.0[H3C-Vlan-interface1] quit[H3C] ping 172.16.1.1 7. telnettelnettelnethomupero1. super[H3C]super password simple homupero2. telnet[H3C]user-interface vty 0 4[H3C-ui-vty0-4]authentication-mode password[H3C-ui-vty0-4]set authentication password simple homupero 8. telnetMacPro~ mika$ telnet 172.16.1.251Trying 172.16.1.251...Connected to 172.16.1.251.Escape character is ^].(snip)Login authenticationPassword:super Password:User privilege level is 3, and only those commands can be usedwhose level is equal or less than this.Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGEsyssystem-viewSystem View: return to User View with Ctrl+Z.[HOMUPERO] 9. S CLI [H3C] sysname magica [magica]S Cisco# hostname magica 10. S [MADOKA]interface GigabitEthernet 1/0/1shutdown[MADOKA-GigabitEthernet1/0/1]shutdownno shutdown[MADOKA-GigabitEthernet1/0/1]undo shutdown 11. S [MADOKA-GigabitEthernet1/0/1]speed ? 10 Specify speed as 10 Mbps 100 Specify speed as 100 Mbps 1000 Specify speed as 1000 Mbps auto Enable ports speed negotiation automatically[MADOKA-GigabitEthernet1/0/1]duplex ? auto Enable ports duplex negotiation automatically full Full-duplex half Half-duplex 12. VlanS VLANVLAN ID 800VLANVLAN800[H3C] vlan 800[H3C-vlan800]name VLAN800 13. VLANS VLANVLANS Port 1/0/1VLAN 800tagged[H3C-GigabitEthernet1/0/1]port link-type hybrid[H3C-GigabitEthernet1/0/1]port hybrid vlan 800 taggedS VLANporttaggedS Untaggeduntaggedtagged 14. S H3C (How-To) 15. S 2011/10/25 Akira Tsumura@ILO,Inc. target : ProCurveSwitch A5800-24Ghttp://www.ilo.co.jp/