ik semicon proposal semicon proposal for each application.pdf · is based on bipolar technology for...
TRANSCRIPT
극한 환경의 ENGINE ROOM 내 ASIC 국내 최초 설계
Automotive POWER ASIC
- Alternator Regulator with RVC Interface - Alternator Multi Function Regulator - Active MOSFET Rectifier for Alternator - Power Folding for Outside Rear view Mirror - Automotive LDO - Automotive Sensor ASIC - Automotive Room Lamp Module - Wipe/Wash Wiper Control IC - CAN Controller / CAN Transceiver
BEST PARTNER FOR YOUR SUCCESS IK Semicon
www.iksemi.com
IK SEMICON Proposal
IK642B Wipe/Wash Wiper Control IC
IK8509 Power Folding for Outside Rear View Mirror
ILE4264-2G / ILE4276 Automotive LDO
IL33193 Automotive Direction Indicator
IL33193-03 Automotive Direction Indicator (with Short Circuit Detector Threshold)
IK Semicon – Automotive IC
IK8001 Alternator Regulator with RVC Control
IL6083 PWM Power Control IC with Interference Suppression
ILC555Q Timer IC
IL8190 Precision Air-core Tach/Speedo Driver with Return to Zero
IN2515 CAN Controller with SPI Interface
ILA82C251 CAN Transceiver for 24V Systems
현대차공급제품
Application Item
Lighting
Room Lamp IKM3004
Head Lamp Leveling Driver IK8508
HID Lamp Driver IK8010
Direction Indicator IL33193B
PWM Power Controller IL6083
Timer IC ILC555QDT
Motor Side Mirror IK8509
Wash Wiper Controller IK642B, IL33197A
통신 CAN IN2515(CAN Controller), ILA82C251(CAN Transceiver)
Sensor Air-Core Tach/Speedo Driver IL8190
Fluxgate Current Sensor IK8014*
Alternator Rectifier for Alternator IK8011
Regulator for Alternator IK8001, IK8006
범용 LDO Regulator IK4993 外 총 8 Items
IK SEMICON Automotive Item
* Under development : Fluxgate Current sensor (2020年 MP 계획)
Lighting
competitor IK solution
• IKM3004 • Automotive Room Lamp Driver
• Competitor : Own Supply Voltage up to 18V
SMD Top View 5450 type
Beam View Angle 120˚
High Current Accuracy at Supply Voltage variation
Reduced Output Current at higher temperatures-negative
thermal coefficient of -0.5%/K
No EMI
Protection of Reverse Voltage
■ Application – Room Lamp
HID Lamp Ballast ASIC (IK8010)
PWM Controller and H bridge driver in One chip
48 LQFP, AEC-Q100 qualified in 2016
Head Lamp Leveling Driver (IK8508) Chip Package , HSL Project
Competitor : NXP, Infineon
AEC-Q100 Qualified
■ Application – Head Lamp Leveling Driver & HID Lamp Driver
Product Compatibility Function Package
IL33193B MC33193 Direction indicator DIP-8 SOP-8
IL33193-03 U643B Direction indicator DIP-8 SOP-8
■ Application – Direction Indicator
■ Application – PWM Power Controller
The IL6083 is based on bipolar technology for the control of an N-channel power MOSFET used as a high-side switch. The IC is ideal for use
in brightness control systems (dimming) of lamps, for example, in dashboard applications.
FEATURES
• Protection Against Short-circuit, Load Dump Overvoltage and Reverse VS • Duty Cycle 18 to 100% Continuously • Internally Reduced Pulse Slope of Lamp's Voltage • Interference and Damage Protection • Charge-pump Noise Suppression • Ground-wire Breakage Protection
PIN DIAGRAM (Package)
TYPICAL APPLICATION CIRCUIT
■ Application – Timer
The ILC555 is CMOS RC timers providing significantly improved performance over the standard SE/NE555
and 355 timers, while at the same time being direct replacements for those devices in most applications.
Improved parameters include low supply current, wide operating supply voltage range, low THRESHOLD,
TRIGGER and RESET currents, no crowbarring of the supply current during output transitions,
higher frequency performance and no requirement to decouple CONTROL VOLTAGE for stable operation.
Specifically, the ILC555 is stable controller capable of producing accurate time delays of frequencies.
• Exact equivalent in most cases for SE/NE555.
• Low Supply Current.
• High speed operation – 500 kHz guaranteed.
• Wide operation supply voltage range – 2 to 18 volts.
• Timing from microseconds through hours.
• Operates in both astable and monostable modes.
• Adjustable duty cycle.
• High output source/sink driver can drive TTL/CMOS
DC Motor Driver
Power Folding Motor Driver (IK8509) • For 12V battery Application
• Production shipping for HKMC since 2015
■ Application – Side Mirror IK8509
Product Compatibility Function Package
IL33197A MC33197A Wash Wiper Controller DIP-8 SOP-8
IK642B U642B Wash Wiper Controller DIP-8 SOP-8
■ Application – Wash Wiper Controller
CAN 통신
■ Application – CAN Controller
IN2515 is a stand-alone Controller Area Network (CAN) controller that implements the CAN specification, version 2.0B
The IC is designed to perform data receiving-transmitting in automotive and industrial applications.
FEATURES
• Supply voltage range VCC: - for IN2515AN, IN2515ADW 2.7 … 5.5 V, - for IN2515BN, IN2515BDW; 4.5 … 5.5 V • Three transmit buffers with prioritizaton and abort features of the transmittance • Two receive buffers with prioritized message storage - Six 29-bit filters - Two 29-bit masks • High-speed SPI Interface (10MHz): - SPI modes 0.0 and 1.1 • Implements CAN V2.0B at 1 Mb/s - 0 – 8 byte length in the data field - Standard and extended data and remote frames • Data byte filtering on the first two data bytes
PIN DIAGRAM (Package)
BLOCK DIAGRAM
EXAMPLE SYMTEM IMPLEMENTATION
■ Application – CAN Transceiver
ILA82C251 is the interface between the CAN protocol controller and the physical bus. The device provides differential transmit capability
to the bus and differential receive capability to the CAN controller. The IC is intended for automotive electronic applications
FEATURES
• Fully compatible with the “ISO 11898-24 V” standard • Thermally protected • Short-circuit proof • Three mode operation • An unpowered node does not disturb the bus lines • At least 110 nodes can be connected • High speed of data transfer (up to 1 Mbit/s) • High immunity against electromagnetic interference.
PIN DIAGRAM (Package)
BLOCK DIAGRAM
EXAMPLE SYMTEM IMPLEMENTATION
Sensor
■ Application – Air-Core Tach/Speedo Driver
The IL8190 is specifically designed for use with air–core meter movements. The IC provides all the functions necessary for an analog
tachometer or speedometer. The IL8190 takes a speed sensor input and generates sine and cosine related output signals to differentially drive an air–core meter.
FEATURES
• Direct Sensor Input • High Output Torque • Low Pointer Flutter • High Input Impedance • Overvoltage Protection • Return to Zero
PIN DIAGRAM (Package)
BLOCK DIAGRAM TYPICAL APPLICATION CIRCUIT
■ Application – Fluxgate Current Sensor
IK8014
<경쟁사 “L”社>
Alternator
• IK8001 : Alternator Regulator with RVC protocol • Alternator Regulator ASIC for 12V battery system : PWM type and GM specific Application
• Completed AEC-Q100 qualification in 2013
• After 2 years Automobile Car evaluation, Started Production Shipping from 2015
• Competitor product is the ST Micron L9914 but IK8001 has a better performance
(standby current : ≤ 250uA vs. ≤ 400uA @room Temp, ≤ 300uA vs. ≤ 1mA @150℃)
• IK8006 : Multi Function Alternator Regulator • Alternator Regulator ASIC for 12V battery system : PWM type with wide optional parameter range
• AEC-Q100 qualification & Customer design-win is scheduled on 2017 Oct
• Competitor products are ST Micron L9911, Bosch CR719 but IK8006 has wider optional parameter range
■ Application – Regulator for Alternator
• IK8011 : Active MOSFET Rectifier alternator ASIC
• Powerful solution for high efficiency & CO2 emissions Environmental Regulation
• Controller ASIC for half bridge Power MOSFET rectification
• EU CO2 emissions Regulation
130g/km since 2012 but will be more strict from 2020 such as 95g/km
Penalty fee = (excessive CO2 gas [g/km] x 95Euro) x annual new automobile car
quantities
• Two Customers confirmed 80% VDA efficiency with IK8011 solution and their planned
production start is 2019 year
■ Application – Rectifier for Alternator
범용(Regulator)
■ Application – LDO
Product IK4993 ILE4263 ILE4264-2G ILE4270G ILE4275 ILE4276 ILE4278 ILE4279-4G
Compatibility L4993 TLE4263 TLE4264-2G TLE4270G/S TLE4275 TLE4276 TLE4278 TLE42794
PKG Type SOP8 SOP20
SOP14 SOT223 TO263-5 TO220-5
TO263-5 TO252-5
TO263-5 TO252-5
SOP14 SOP14
Input Voltage (V) 5.6~31 6~45 6~28 6~42 6~40 6~40 6~45 6~45
Consumption Current(MAX) 2mA 18mA >4mA 75mA 22mA 25mA 12mA >8mA
Quiescent Current(Io≤1mA, MAX) 125uA 1.3mA 70uA 1.5mA 220uA 220uA 230uA 300uA
Shutdown Current - 50uA - - - 10uA 10uA -
Output Voltage (V) 5 5 5 5 5 5 / 8.5 / 10 ADJ(2.5~20)
5 5
Drop Voltage (V, MAX) <0.4 <0.5 <0.5 <0.7 <0.5 <0.5 <0.5 <0.5
Tolerance (%) ±2 ±2 ±3 ±2 ±2 ±4 ±4 ±2
Output current (mA) 150 200 150 550 400 400 200 150
Over temp Protection yes yes yes yes yes yes yes yes
Short circuit Protection yes yes yes yes yes yes yes yes
Reset Output yes yes - yes yes - yes yes
Rest delay yes yes - yes yes - yes yes
Reset Switching Threshold Adjust - yes - - - - yes yes
Watchdog Input yes yes - - - - yes -
Watchdog Output - - - - - - yes -
Watchdog Adjust yes - - - - - yes -
Watchdog Enable yes - - - - - - -
Inhibit - yes - - - yes - -
Sense input / output - - - - - - - yes
AEC Q100 - yes yes - - yes yes -
Datasheet Click Click Click Click Click Click Click -
APP Note ClickDEMO Click Click Click Click Click Demo Click -
Low Dropout Regulator