industrial valves development group€¦ · max 500 mm iran 1395 machine sazi tabriz tn50 br 2...

گسترگروه توسعه شیراالت نیک INDUSTRIAL VALVES DEVELOPMENT GROUP

www.neakvalve.com

با مشارکت:

(IDRO)سازمان گسترش و نوسازی صنایع ایران

لیست مندرجات

آشنایی با گروه توسعه شیرآالت صنعتی نیک گستر(NEAK VALVE) نسخه فارسی

آشنایی با گروه توسعه شیرآالت صنعتی نیک گستر(NEAK VALVE) انگلیسینسخه

توسعهو جانمایی کارخانه و فاز نقشه

شانا سایت نترلی توسط شرکت نیک ولو دراعالم بومی سازی شیرآالت ک

آگهی تاسیس

آگهی آخرین تغییرات

پروانه بهره برداری

لیست تامین کنندگان اتاق های بازرگانی و عضویت در مجامع و

چارت سازمانی

اعتبارنامه مالی

محدوده تولیدات

گواهینامه هایISO 10002 ,ISO 9001:2015 ,ISO 14001 ,OHSAS 18001

گواهینامه انطباق محصول با استاندارد های اروپا(CE)

گواهینامه انطباق محصول با استاندارد هایAPI

لیست استانداردهای مورد استفاده

لیست نرم افزارهای مورد استفاده

ن آالت اصلییلیست ماش

مشتریان

سوابق اجرایی و پروژه ها

QCP

ITP

کیفیت خط مشی نظام مدیریت

معرفی شرکت همکار ایتالیایی در بخش طراحی

مستندات همکاری با شرکت های خارجی

گستر نيک صنعتی شيرآالت توسعه گروه با آشنايی

(Neak Valve)

بسمه تعالی

(Neak Valve)گستر الت صنعتی نيک آآشنايی با گروه توسعه شير

( اولين توليد کننده شير آالت کنترلی صنايع نفت، NEAK VALVEگروه توسعه شير آالت صنعتی نيک گستر با نام تجاری نيک ولو )

گاز و پتروشيمی در ايران می باشد.

اين شرکت در سال اقتصاد مقاومتی و با هدف بومی سازی و ايجاد توانمندی داخلی با مشارکت و سرمايه گذاری دو شرکت گلدن گروپ

آلمان و سازمان گسترش و نوسازی صنايع ايران و با مشارکت فنی و مهندسی شرکت ارسه ايتاليا شروع به کار نموده است. صالحيت فنی

ت پشتيبانی ساخت و تهيه کاالی نفت و شرکت صنايع پتروشيمی خليج فارس رسيده و در ليست بلند شرکت نفت اين گروه به تاييد شرک

نيز به ثبت رسيده و امکان حضور در مناقصات شرکتهای متعدد در حوزه نفت و گاز و پتروشيمی را دارا می باشد.

اليا در پروژه های ايرانی و بين المللی، سياست اصلی اين شرکت رعايت با توجه به سوابق طوالنی شرکتهای گلدن گروپ آلمان و ارسه ايت

الزامات فنی و کيفيت در پروژه ها، تحويل در کوتاه ترين زمان ممکن با قيمت رقابتی به کار فرمايان می باشد.

شامل موارد ذيل می باشد: حوزه توليدات و خدمات اصلی اين شرکت

1- Ball Valve 1500ار کاری فش”46 تا ”1از

2- Control Valve در تمامی ساااايزها و سااااختارها اع ازGlobe Valve وCheck Valve و با انواع

Actuator .های هيدروليکی، الکتريکی و بادی

شات خاص نيز در -3 سفار ست کارفرما عالوه بر امکان توليد اقالم فوق، امادگی اخذ صورت درخوا شيرآالت: در ساير

مجموعه وجود دارد.

.ر و نگهداری شير آالت با داشتن تي های مجرب اجرايیارائه خدمات تعمي -4

وجه به شاناساايی و در ارتباب بودن با تآالت نيز بساته بعدی خدمات اين شارکت اسات که بالوازم يدکی شايرتامين -5

شرکتهای متعدد اروپايی، کره جنوبی و ايرانی قابليت تامين لوازم يدکی نيز به صورت تخصصی در اين مجموعه وجود

دارد.

ساتيد معتبر دانشگاهی که در اين زمينه دارای سوابق علمی و -6 ارائه خدمات طراحی و مهندسی و مشاوره فنی توسط ا

ثبت اختراعات بوده و در حال همکاری با اين مجموعه می باشند نيز از جمله خدمات ويژه و ک نظيری است تجربی و

اشد. ب می خود مشتريانه ب ارائه آن بهر مفتخکه اين مجموعه

تامين منابع مالی ارزان قيمت برای سفارشات واگذار شده به اين شرکت. -7

ر: همواره در انبار اين شرکت تعدادی شيرآالت دستی يا اتوماتيک ساخت تحويل فوری شيرآالت از محل موجودی انبا -8

اين شرکت يا شرکتهای همکار اروپايی موجود می باشد و به صورت فوری قابل تحويل می باشد.

249ان يک ، پالک آب، خيابان خيابان آبانس اباد، بلوار نگارستان، شهرک صنعتی شمآزادراه خليج فارس، تهران، آدرس کارخانه:

www.neakvalve.comو آدرس وب سايت: 021-56231360-64 :تماستلفن

About Neak Gostar (Neak Valve)

Background:

Neak Gostar was incorporated in 2016 as a joint venture between multinational

companies headquartered in Germany and Iran. The main goal has been to create a one-

stop shop for all requirements of valves (Ball, Gate, Globe...) especially control valves

within the sectors of oil, gas, petrochemical, power generation and utility. Being the first

factory in the Middle East and North Africa (MENA) region to manufacture control valves,

this is our niche market alongside special types of valves such as HIPPS for which the

demand in the region has been increasing over the past 2 decades. Neak Valve is capable

of designing and engineering the most advanced types of Control Valves and Actuator

Valves for oil, gas and petrochemical applications. Our supply chain includes both local as

well as international companies. Moreover, our work force includes local and international

experts. Our engineering team works under supervision of world class experts from

Erreesse S.R.L.

Location:

MENA region has a substantial impact on the global energy market especially oil and gas

sector. Being home to some of the richest countries in terms of hydrocarbon reservoir and

more than 40% of the global oil, gas and petrochemical products being shipped through

the region, it has been one of the main markets for manufacturers of petroleum equipment,

onshore to offshore, upstream to downstream, small and big. Therefore, Neak Valve

shareholders have decided to serve the region with its first control valve factory/service

center.

Factory:

Factory: Located in Shams Abad, Neak Valve is strategically located 50 minutes’ drive

from Tehran, capital city of Iran, 10 minutes from IKIA airport and with immediate access

to the national and international roads and railway networks. Having more than 5,000sqmtr

of covered area dedicated to the production, testing and storage facility in addition to

3,000sqmtr of open air storage yard, Neak Valve is the first of its kind and with the

expansion plan before 2020, Neak Valve will be one of the biggest Control Valve

manufacturer in the Middle East region.

در سایت شانا گستر نیک شرکت توسط کنترلی شیرآالت سازی بومی اعالم

(Neak Valve)

11/18/2017 د�� ا��و�� - ��پ �� | �� ا��ع ر�� و ا��ژی

http://www.shana.ir/fa/newsagency/print/268235/%D8%B3%D8%A7%D8%AE%D8%AA-%D8%B4%DB%8C%D8%B1%D8%A2%D9%84%D8%A7%D8%… 1/1

©www.shana.ir

(پنج شنبه ۱۱ شهریور ۱۳۹۵) ۱۲:۱۱

با سرمایه گذاری مشترک ایران و ایتالیا

ساخت شیرآالت کنترلی و هوشمند صنایع نفت و گاز بومی شد

نخستین کارخانه ساخت انواع شیرآالت کنترلی و هوشمند صنایع نفت، گاز و پتروشیمی با سرمایه گذاری مشترک ایران و ایتالیا با هدفبومی سازی و انتقال تکنولوژی به بهره برداری رسید.

عبداهللا باباخانی، رئیس هیئت مدیره شرکت نیک گستر از شرکتهای تابعه ایدرو در گفتگو با خبرنگار شانا با بیان این که ساخت

انواع شیرآالت کنترلی و هوشمند به عنوان یک کاالی اساسی برای تاسیسات و صنایع راهبردی نفت،گاز پاالیش و پتروشیمی با

هدف بومی سازی حائز اهمیت است، گفت: ساخت و بومی سازی این قطعات مصداق بارز اجرای سیاست های اقتصاد مقاومتی

است.

وی افزود: این واحد صنعتی با سرمایه گذاری چهار میلیون یورو با مشارکت ایران و دو شرکت معتبر اروپایی با هدف بومی سازی و

انتقال تکنولوژی ساخت شد که با بومی سازی فناوری نوین تولید این شیرآالت امکان صادرات حدود 30 درصد از محصوالت فراهم

می شود.

باباخانی با تاکید بر استفاده از توان حداکثری از این واحد صنعتی در راستای سرعت بخشی به تهیه و تامین قطعات مورد نیاز

تاسیسات صنعت نفت ایران، اظهار کرد: درصدد هستیم تا در سال نخست بیش از شصت میلیون یورو انواع شیرآالت کنترلی در

ابعاد و اندازه های مختلف تا ٥٦ اینچ و مطابق با استاندارد هاى دنیا با کاربرد هاى مختلف تولید کنیم.

رئیس هیات مدیره این واحد صنعتی با اشاره به این که تا پیش از راه اندازی این کارخانه نیاز داخل از طریق واردات تأمین می

شد، گفت: هم اکنون ساالنه با تولید این میزان شیرآالت کنترلی حدود 30 میلیون ارز صرفه جویى در پی خواهد داشت و میزان

وابستگی صنایع نفت و گاز و پتروشیمی و صنایع سنگین به واردات این تجهیزات حساس و راهبردی به میزان زیادی کاهش می

یابد.

وی با بیان این که تولید این شیرآالت از تکنولوژی خاصی برخوردار است، تصریح کرد: بنا داریم با توسعه و استاندارد سازی این

واحد صنعتی عنوان بزرگترین قطب تولیدکننده شیرآالت کنترلی هوشمند صنایع نفت و گاز در سطح منطقه را کسب کنیم.

باباخانی یادآور شد: کیفیت محصوالت این واحد به عنوان الگو در آینده قادر خواهد بود سطح کیفی واحد های دیگر منطقه را

. ارتقاء دهد و محصوالت آن ها را استاندارد سازی کند

پاالیش و پتروشیمی است. وجود این کارخانه گاز، قطعات مهم و اساسی تاسیسات صنایع نفت، شیرآالت کنترلی و هوشمند از

نقش مهمی در تسریع پروژه های در حال اجرا و همچنین کاهش زمان تعمیرات در دوره بهره برداری را دارد و هم اکنون این واحد

صنعتی در شهرک صنعتی شمش آباد تهران برای بیش از 500 نفر بطور مستقیم و غیر مستقیم اشتغال مولد ایجاد کرده است.

کلیه حقوق این وب سایت متعلق به شبکه اطالع رسانی نفت و انرژی است.

مراسم افتتاحیه با حضور وزیر محترم صنعت، معدن و تجارت

گستر نیک شرکت تاسیس آگهی

(Neak Valve)

گستر نیک شرکت تغییرات آخرین آگهی

(Neak Valve)

گستر نیک شرکت برداری بهره پروانه

(Neak Valve)

عضویت درمجامع، اتاق های بازرگانی و لیست تامین کنندگان

(Neak Valve)

شرکت نیک گستر سازمانی چارت

(Neak Valve)

NV- OC-01/00کدسند:

12/07/2017تاریخ:

چارت سازمانی

سهامداران

هیئت مدیره

مدیر عامل

سرپرست تحقیق و توسعه

مدیر طراحی و مهندسی

مدیر برنامه ریزيمدیر کنترل و تضمین کیفیت

مدیر کارخانه

حراست انبارخدمات

پس از فروشسر پرست تولید

تعمیرات و نگهداري

سر پرست ایمنی و بهداشت فناوري اطالعات ترابري

معاونت بازاریابی مدیر پروژه مدیر بازرگانی سرپرست مالی سرپرست اداري

مشاور مالی مشاور حقوقی

گستر نیک شرکت مالی اعتبارنامه

(Neak Valve)

گستر نیک شرکت تولیدات محدوده

(Neak Valve)

PRODUCTION RANGE

FLOATING BALL VALVES

TRUNNION SIDE ENTRY BALL VALVES

TRUNNION TOP ENTRY BALL VALVES

TRUNNION FULLY WELDED & FULLY WELDED LIGHT BALL VALVES

SUBSEA BALL VALVES

TRUNNION DOUBLE BLOCK & BLEED BALL VALVES (Double ball)

CRYOGENIC & HIGH TEMPERATURE BALL VALVE

COMPACT BALL VALVES

CONTROL VALVES – LINEAR & ROTARY

VALVES – GATE, GLOBE, CHECK, PLUG, BUTTERFLY

PRODUCTION RANGE

Control Valve: Globe Valve, Ball Valve, Butterfly Valve -Sizes: 𝟏

𝟐⁄ " up to 60"

-Pressure Classes: API6D: CLASS 150# to CLASS 2500# API6A: API3000# to API15000#

APPLICABLE SPECIFICATIONS API 6D MSS-SP-6 API 6DSS ASME B16.34 API 6A ASME B16.25 API 6FA-API 607 ASME B16.10 API 598 ASME B16.5 BS EN 12266 ASME B31.3 BS EN ISO 17292 ASME BPVC SEC.VIII NACE MR-01-75 (ISO 15156)

گستر نیک شرکت ISO های گواهینامه

(Neak Valve)

گستر نیک شرکت (CE) اروپا استانداردهای با محصول انطباق گواهینامه

(Neak Valve)

گستر نیک شرکت (API) استانداردهای با محصول انطباق گواهینامه

(Neak Valve)

گستر نیک شرکت استفاده مورد استانداردهای لیست

(Neak Valve)

API 6D‐API 6FA‐ API 607‐API 598‐API 608

ASME B16.34‐ASME B16.10‐ ASME B16.5‐ ASME B16.47‐ ASME B16.25‐

ASME B16.20

ISO 5211‐ISO 5208

BS 1873‐BS 5351

ASTM A216‐ ASTM A182‐ ASTM A276‐ ASTM A217‐ ASTM A350‐ ASTM A351‐

ASTM A352

ISA S75.01‐ ISA S75.03‐ ISA S75.16‐ ISA S75.07‐ ISA S75.23

MSS SP 6‐ MSS SP 9

NV-LI-20/00کدسند: لیست استانداردهای مورد استفاده

12/07/2017تاری خ:

گستر نیک شرکت استفاده مورد افزارهای نرم لیست

(Neak Valve)

Name Application

Solid works Design, Drawings, Assembly, Simulation

Inventor Design, Drawings, Assembly, Simulation

AutoCad Drawings

eDrawings Drawings

SurfCam CNC Machining

Power Mill CNC Machining

HPSC Panel Valve Testing

MS Office Documenting

MS Project Planning

Adobe Acrobat Pro Documenting

MS Outlook Admin

مورد استفاده نرم افزارهایلیست NV-LI-20/00کدسند:

12/07/2017تاری خ:

گستر نیک شرکت اصلی آالت ماشین لیست

(Neak Valve)

1Turning Lathe2TN50 BRMachine Sazi Tabriz1395Iranmax 500 mm

2Turning Lathe1TN71BMachine Sazi Tabriz1395Iranmax 700 mm

3Radial Arm Drill12456/2456H. Cegielski – Poznań1984PolandArm Stroke 1600 mm

4Test Bench114‐0098HPSC2015Italy H2,N2,H2O ‐ 300 tons.

5Test Bench114‐0099HPSC2015Italy H2,N2,H2O ‐ 1650 tons.

6Air Compressor + Dryer1HAB‐HADHatco1395Iranmax 10 bar

7Scrubber Dryer1 66 BM 70Columbus2016German6 Km/h + 80 L Tank

8Electrical Forklift1CDD15BTMS2016Iran1.5 ton + 3 meter height

9Jack Pallet4BFQTMS2016Iran3 ton

10Jack Pallet3 BF‐IIITMS2016Iran3 ton

11Hydrualic Wrench1CESPITE:45MAPP Tools2014ItalyHydrulic pack

12Gantry Type Crane1_Demag2015Germany10 ton

13Gantry Type Crane2_podem1984Bulgaria5 ton

14Assembly Table5__2015Iran3000 x 1300 mm

15Ware House2__2015Iran

16Stock Area2__2015Iran

16Service Auto1_Pegout2015IranSedan

Document Number:

NV‐LI‐11/00

Date:12/07/2017

No.MachinesUnit

List Of Machines

Product YearProduct CountrySpec Brand Serial NO.

Date Of Issue: 1396/05/22 Provider: Navid Khaledi

گستر نیک شرکت فعلی مشتریان

(Neak Valve)

فعلی مشتریان

ضر حال در شتریان حا ستر )نیک ولو( نیک شرکت الزم های ارزیابی انجام از پس ذیل م و داده قرار تایید مورد را گ

خود اقدام نموده اند:AVL لیست در شرکت نام درج یا و شرکت این برای استعالم به ارسال نسبت

مدیریت پشتیبانی ساخت و تامین کاال )کاال نفت( -1

پتروشیمی خلیج فارسشرکت صنایع -2

کبیر امیر پتروشیمی -3

مارون پتروشیمی -4

رازی پتروشیمی -5

فجر پتروشیمی -6

پارسیان گاز الیشگاهپا -7

قاره قالت نفت شرکت -8

گچساران گاز و نفت برداری بهره شرکت -9

قشم و سرخون گاز پاالیش شرکت -10

سپاهان نفت شرکت -11

آذرآب شرکت -12

گستر نیک شرکتی ها پروژه / سوابق

(Neak Valve)

سوابق / پروژه ها

NEAK Valve Reference List

QTY End Type

PWHT Size(Inch) Class(#) Base

Material Year

End User/ Destination

Customer Scope Standard Valve Type No

16 FLGD No 6 To 8 300-600 CS 2017 Iraq Golden Group Production API Ball Valve 1

20 FLGD No 10 To 30 600-2500 CS 2017 XXXXXX PSG Company Repair Ball Valve 2

704 FLGD Yes Up to 16 150-600 CS-AS-Monel

2018 Refinery Bid Boland II

Sazeh-Jahanpars JV

Production BS EN ISO

15761, ASME B16.34

Check Valve 3



Sazeh-Jahanpars JV

Production API 600 Gate Valve 4



Sazeh-Jahanpars JV

Production BS1873 Globe Valve 5

گستر نیک شرکت (QCP)برنامه جامع کنترل کیفیت

(Neak Valve)

INDEX

1. Scope

2. Legend & Abbreviations

3. Loca on of FAT, attendees of FAT

4. Standard codes

5. Inspection

5.1. Material Test Certificates

5.2. Visual Examination

5.3. Incoming Goods Inspection

5.4. Intermediate Machining Inspection

5.5. Valve Testing

5.6. Final Tests

5.6.1. Dimensional Checks

5.6.2. Function Tests

5.6.3. Visual Inspection: Valve Markings

5.6.4. Paintjob and Overall Cleanliness

5.6.5. Shipment Quantity Check

5.6.6. Documents Check and Stamp

5.7. Packing Inspection

5.8. Shipping Inspection

6. Reference Documents

QUALITY PLAN WI‐NV‐14 REV.0 Page 1 of 7

1. SCOPE

This document prescribes the testing & quality planning required for manufacturing of valves

2. LEGEND AND ABBREVIATIONS PO: Purchase Order

ASTM: American Section of the International Association for Testing Materials

MSS: Manufacturers Standardization Society

API: American Petroleum Institute

ASME: American Society of Mechanical Engineers

FAT: Factory Acceptance Test

GA: General Arrangement

QC: Quality Control

3. LOCATION AND ATTENDEES Location of FAT shall be Neak Gostar Industrial Valves Development Group facilities in Tehran,

Iran. The attendees of FAT shall be appointed in accordance with ITP and project requirements.

4. STANDARD CODES The standards and codes used for manufacturing and assembly of valves and its components

shall be in accordance with the international normal practices and well accepted standards such

as API, ASME, ASTM instructions and in line with the project technical specifications and

requirements.

5. INSPECTION 5.1MATERIAL TEST CERTICATES

Material tests certificates for all major valve components shall be performed in

accordance with the applicable material standards. Test reports or test certificates

according to EN10204.3.1 will be submi ed.

5.2. VISUAL EXAMINATION

Visual surface examination for all the major valve components shall be carried

out in accordance to MSS‐SP‐55 (casting surface) and drawings (markings).



5.2.1. Acceptance Criteria:

‐ Acceptable parts shall be labelled as “Accepted” and transferred to next stage of production process.

‐ Non‐acceptable parts shall be labelled as “On‐hold” and its situation shall be evaluated by Q.C. Department Manager.

‐ “On‐hold” parts may be repaired whenever indicated/allowed by applicable standards upon approval of Q.C. Department Manager and authorization from customer.

‐ Non‐repairable parts shall be marked as “Rejected” and internal report shall be issued. A new part shall be wholly manufactured.

5.3. INCOMING GOODS INSPECTION

Materials/parts received from suppliers will be inspected in comparison to drawings and/or purchase order on:

‐ Marking (including Tag No, Manufacturer’s name & Trade mark, model, type number, serial number).

‐ Type (max. pressure rating, size of valve, material, action on air supply failure, flange rating).

‐ Quantity.

‐ Condition/visual appearance.

‐ Dimensions.

‐ Documentation (including degree of protection and hazardous areas classification).

Acceptance Criteria:

Refer to 5.2.1.

5.4. INTERMEDIATE MACHINING INSPECTION

For machined parts intermediate‐machining inspection shall be carried out in accordance

with shop drawings



Refer to 5.2.1.

5.5. VALVE TESTING

The equipment used to perform the tests shall be Neak Gostar Industrial Valves

Development Group test benches, counter flanges for the valves’ sizes and ratings and

calibrated gauges.

5.5.1. Back‐seat test

Neak Gostar Industrial Valves Development Group shall perform this test on 100% of

ordered units.

Test standard: API 598 / ASME B.16.34‐2004.

‐ The test medium used for this test is clear water based with anti‐corrosion additives

and shall not exceed 100 ppm of chloride content and not to exceed 50ºC.

‐ Each valve shall be hydrostatically tested after assembly and prior to painting.

‐ The valve shall be closed from both sides.

‐ The valve shall be set in the fully open position and the packing gland loose or not

installed, and completely filled with test fluid.

‐ Any entrapped air should be vented from both ends and the body cavity.

‐ All external surfaces should be dried.

‐ The valve shall then be brought to the pressure and at least the minimum time as per

the relevant standard guidelines.

Acceptance criteria:

Refer to 5.2.1.

5.5.2. Leakage test

Neak Gostar Industrial Valves Development Group shall perform this test on 100% of

ordered units.

‐ The test medium used for this test is clear water based with anti‐corrosion additives

and shall not exceed 100 ppm of chloride content and not to exceed 50ºC.

‐ The seat sealing surface / closure shall be free from oil, grease and sealant.

‐ Each valve shall be hydrostatically tested after assembly, shell tested and prior to

painting.


‐ The valve shall be closed from both sides.

‐ With the valve in the partially open position, the cavity shall be completely filled with

test fluid.

‐ Any entrapped air should be vented from both ends and the body cavity.

‐ The valve should be closed and then be brought from one side to the pressure and at

least the minimum time as per the relevant standard guidelines.

Acceptance criteria:

‐ Valves failing to meet the above maximum leakage levels shall be rejected.

‐ Valves failing the test shall be labelled as “On‐hold”, and may be re‐adjusted whenever

indicated/allowed by applicable standards upon approval of Q.C. Department Manager

and authorization from customer.

‐ Valves passing the test shall be labelled as “Accepted” and transferred to next stage of

the production process.

5.6. FINAL TESTS

5.6.1. Dimensional checks

Dimensions: Face to face dimension and critical dimensions in approved drawings shall

be checked.

5.6.2. Function tests

Once valve body, actuator (if any) and accessories are assembled, the correct open and

close function will be tested, adjusting actuator limits. It will be checked for smooth

operation during opening and closing. Dimensional inspection and actuator insulation

will be revised. The complete stroke operation, stroking time and operation of

accessories shall be checked.


‐ Valves failing the test shall be labelled as “On‐hold”, re‐adjusted and re‐offered for

inspection.



5.6.3. Visual inspection: Valve Markings


The markings shall be verified by QC:

Valve markings:

‐ “NEAK VALVE” characters on body

‐ Body material

‐ Pressure designation

‐ Nominal Size



inspection.



5.6.4. Paintjob and overall cleanliness.

A visual inspection prior to packing will be carried out to ensure valve is in an overall

good condition and free from damages.

Approved painting procedure shall be followed for all the valves where applicable.



inspection. ‐ Valves passing the test shall be labelled as “Accepted” and transferred to

next stage of the production process.

5.6.5. Shipment Quan ty Check

QC shall confirm contents of final dispatch are as STRICTLY those of customer

P.O. document. Appointed TPI or customer representative will check contents of final

dispatch.

5.6.6. Documents check and Stamp

QC shall confirm (by stamping and signing) all the certificates and required reports listed

in the DDR are included in the project quality documentation during witness.

5.7. PACKING INSPECTION

After testing, painting and cleaning the valve units, the valves will be packed under

supervision of head of production. Quality Control department visually samples the method


of packing. Head of expedition checks if packing is in accordance to the specifications and

international applicable standards.

The inside of seaworthy wooden boxes shall be furnished with tarpaper. If the tarpaper tears

up during packing, it will be renewed.

The tag numbers will be permanently marked on the outside of the box and/or packing list.

The valves will be placed standing on its side or stacked (if possible) in the wooden box.

The weight per box depends on valve size and type. The size of the box depends on the sizes

of the valve units. Valve packing must be as individualized as possible and it is not allowed

to gather several valves in a large crate loosely.

5.8. SHIPPING INSPECTION

Q.C. must ensure after completion of packing inspection that shipping is handled to port or

airport (point of export) or the project site in a reasonable period of time.

6. REFERENCE DOCUMENTS

‐ Inspection and Test Plan (ITP)

‐ Equipment data sheets

‐ Drawings

‐ Painting procedure.


گستر نیک شرکت (ITP) تست و بازرسیبرنامه

(Neak Valve)

A B C D Note.

5/1 valve and operator fitting NEAK VALVE drawing n.a. internal form R W 10% _ R _

6 TESTING

7 Certification review

3 of 3

_

W 20% _ R

_ R _

W 20% _

W 20%

R

_ R _

R W 20% _ R _

Notes:

Pos Activity Description Reporting /Documents

7/1 Certification review Relevant standards Test Certificates R W 100%

_

6/6Visual and dimensional check on

assembled valvesAs per approved DWG

Visual and Dimensional

conformity certificate

6/5 Valve draining , drying and ceaning NEAK VALVE _ R

6/4 Pneumatic Seat TestAPI 6D 24 th Ed. 2014

API 598 10 th Ed.2016Test Report R

6/3 Functional Test with

stroking time measurement (where

applicable)

Test Report R

W 20% _ R _

6/2 Hydrostatic Seat TestAPI 6D 24 th Ed. 2014

API 598 10 th Ed.2016Test Report R W 20% _ R _

6/1 Hydrostatic Body TestAPI 6D 24 th Ed. 2014

API 598 10 th Ed.2016

INSEPECTION &TEST PLAN NV‐WI‐13 Date:10/11/2017

Test Report R

5 Valve + operator assembly

Acceptance Criteriainspction activity

گستر نیک شرکت کیفیت مدیریت نظام مشی خط

(Neak Valve)

گستر نیک شرکت طراحی بخش در ایتالیایی همکار شرکت معرفی

(Neak Valve)

ERREESSE offers a reliable combination of Made in Italy,

short deliveries and API, ISO, PED & SIL accredited

production range and in-house testing services which

include Hyperbaric testing for subsea ball valves and

Hydrostatic, Pneumatic and High Pressure Gas testing

at cryogenic temperatures down to -196°C to elevated

temperatures up to 660°C for topside ball valves.

Hard work, passion and smart attitude, always

the best solution at the right time together

with the development of new technologies,

the know-how and the expertise of our team

resulted in an ongoing success which makes us

a reliable supplier. Our target and mission is to

supply a high performance Italian product and

a customized service committed to excellence

and Customer Satisfaction.

About us

Experienced manufacturer of Nickel Alloys, Duplex, Super Duplex, Titanium, Aluminum-Bronze, Stainless Steel

& Carbon Steel High Performance Valves

ERREESSE, established in 2004, is a

manufacturing company based in the

Northern Italy, Grignasco, a nice town in

the green Valsesia (Sesia Valley), along the

enchanting Sesia River, 35 minutes far from

Milano Malpensa.

Proudly made in Italy Proudly made in Erreesse!

erreesse 1

ERREESSE offers a reliable combination of Made in Italy,

short deliveries and API, ISO, PED & SIL accredited

production range and in-house testing services which

include Hyperbaric testing for subsea ball valves and

Hydrostatic, Pneumatic and High Pressure Gas testing

at cryogenic temperatures down to -196°C to elevated

temperatures up to 660°C for topside ball valves.

Hard work, passion and smart attitude, always

the best solution at the right time together

with the development of new technologies,

the know-how and the expertise of our team

resulted in an ongoing success which makes us

a reliable supplier. Our target and mission is to

supply a high performance Italian product and

a customized service committed to excellence

and Customer Satisfaction.

About us

Experienced manufacturer of Nickel Alloys, Duplex, Super Duplex, Titanium, Aluminum-Bronze, Stainless Steel

& Carbon Steel High Performance Valves

ERREESSE, established in 2004, is a

manufacturing company based in the

Northern Italy, Grignasco, a nice town in

the green Valsesia (Sesia Valley), along the

enchanting Sesia River, 35 minutes far from

Milano Malpensa.

Proudly made in Italy Proudly made in Erreesse!

Specific models are also available to suit corrosive and

severe abrasive services in sandy, slurry, fouling, scaling and

solidifying conditions for Mining and Drilling Industry.

ERREESSE Engineering & Production Team work to offer a continuous innovation and an improved valve range to meet the most critical applications

Engineering & Production

Each step of valve engineering and manufacturing can

be validated using advanced software starting from

a 3D model to Finite Element Analysis of loads,

tensions and deformations and final Stress tests,

according to the applicable International Standards.

Such investigations allow daily check on different design

conditions calculation sheets and continuous improvements in

valves performance.

Our manufacturing program includes nickel alloys, duplex,

super duplex, titanium, aluminum-bronze, 6-molibdenum,

stainless steel and carbon steel metal and soft seated

On/Off, Control & Transfer Ball Valves in Top entry

and Side entry constructions, with Split, Fully Welded,

Multiple way, Modular or Integral dual ball (DBB) body

engineered to withstand and exceed the high risk industry

applications in the Oil & Gas, Petrochemical, Chemical, Marine,

LNG Onshore & Offshore Industry, on topside and subsea

installations worldwide.

Example of Finite Element Analysis Stress Analysis

Example of Finite Element AnalysisDeformation Analysis

Example of 3D Top Entry model

Example of typical drawing

Specific models are also available to suit corrosive and

severe abrasive services in sandy, slurry, fouling, scaling and

solidifying conditions for Mining and Drilling Industry.

ERREESSE Engineering & Production Team work to offer a continuous innovation and an improved valve range to meet the most critical applications

Engineering & Production

Each step of valve engineering and manufacturing can

be validated using advanced software starting from

a 3D model to Finite Element Analysis of loads,

tensions and deformations and final Stress tests,

according to the applicable International Standards.

Such investigations allow daily check on different design

conditions calculation sheets and continuous improvements in

valves performance.

Our manufacturing program includes nickel alloys, duplex,

super duplex, titanium, aluminum-bronze, 6-molibdenum,

stainless steel and carbon steel metal and soft seated

On/Off, Control & Transfer Ball Valves in Top entry

and Side entry constructions, with Split, Fully Welded,

Multiple way, Modular or Integral dual ball (DBB) body

engineered to withstand and exceed the high risk industry

applications in the Oil & Gas, Petrochemical, Chemical, Marine,

LNG Onshore & Offshore Industry, on topside and subsea

installations worldwide.

Example of Finite Element Analysis Stress Analysis

Example of Finite Element AnalysisDeformation Analysis

Example of 3D Top Entry model

Example of typical drawing

2 erreesse

erreesse s.r.l.trunnion & floating ball valves

CFD Velocity profile

CFD Pressure profile

Velocity profile

Pressure profile

Example of 3D ball & trim

Exam

ple

of

Con

trol

Bal

l Val

ves

(wit

h t

rim

)Ex

amp

le o

f C

ontr

ol B

all V

alve

s (w

ith

out

trim

)


CFD Velocity profile

CFD Pressure profile

Velocity profile

Pressure profile

Example of 3D ball & trim

Exam

ple

of

Con

trol

Bal

l Val

ves

(wit

h t

rim

)Ex

amp

le o

f C

ontr

ol B

all V

alve

s (w

ith

out

trim

)

erreesse 3

Valves

A ball valve is a device with a spherical obturator engineered to regulate the flow of a fluid by opening, closing, transferring

or just obstructing the port through it

Ball valves have a straight configuration and

are suitable for many process services in the

Oil & Gas, LNG, Chemical, Petrochemical,

Power Generation, Marine & Offshore Industry,

starting from drilling, mining and extraction to

refining, petrochemistry, final transportation

and pipeline distribution.

ERREESSE production range includes Trunnion

ball valves, Floating ball valves and Needle

monoflange valves.

Trunnion Ball Valves

Floating Ball Valves

Needle Valves

Valves

A ball valve is a device with a spherical obturator engineered to regulate the flow of a fluid by opening, closing, transferring

or just obstructing the port through it

Ball valves have a straight configuration and

are suitable for many process services in the

Oil & Gas, LNG, Chemical, Petrochemical,

Power Generation, Marine & Offshore Industry,

starting from drilling, mining and extraction to

refining, petrochemistry, final transportation

and pipeline distribution.

ERREESSE production range includes Trunnion

ball valves, Floating ball valves and Needle

monoflange valves.



Needle Valves

5erreesse

Side Entry

Top Entry

Multiple Way

Trunnion ball valves have the obturator

bounded by trunnions which do not allow axial

displacements of the ball itself in the flow direction;

line pressure compresses the seat onto the ball ,

the contact between surfaces generates the valve

sealing. Trunnion standard construction ensures

automatic cavity relief in case of overpressure

in the body cavity; these valves can be selected

for a wide range of applications with no specific

limits to sizes and pressures.

ERREESSE production range includes control

valves with V-port and Cage Ball design which are

designed according to IEC 534/ISA S75 and meet

API 6D, API 6A and other International valve

design Standards.

• Split body

• Fully welded body

• Modular body (DBB)

• Control valve

• Bolted bonnet


• Control valve

• Rising stem non-contact

• Eccentric ball non-contact

• 3-way bolted bonnet




Side Entry

Top Entry

Multiple Way

Trunnion ball valves have the obturator

bounded by trunnions which do not allow axial

displacements of the ball itself in the flow direction;

line pressure compresses the seat onto the ball ,

the contact between surfaces generates the valve

sealing. Trunnion standard construction ensures

automatic cavity relief in case of overpressure

in the body cavity; these valves can be selected

for a wide range of applications with no specific

limits to sizes and pressures.

ERREESSE production range includes control

valves with V-port and Cage Ball design which are

designed according to IEC 534/ISA S75 and meet

API 6D, API 6A and other International valve

design Standards.

• Split body

• Fully welded body


• Control valve

• Bolted bonnet


• Control valve

• Rising stem non-contact

• Eccentric ball non-contact





6 erreesse

One, two or three pieceReduced bore, full bore or fully piggableAnti blow-out stemISO 5208Included, the ball valve design includes an electric conductive connection between the internal parts of the ball valve and the body, providing the anti-static function.Automatic cavity relief to prevent overpressure in body cavity (self-relieving seats)Bi-directional, Double block & bleed (DBB) with sealing in both directions (DIB-1&2 upon request) Metal seated with Tungsten, Chrome Carbide or STELLITE coatings Primary metal secondary soft (PMSS) with differential hardness between the ball and seat to prevent galling of the substrate Soft seated with thermoplastic polymers (Nylon, PEEK, PCTFE), special polymers upon request Elastomers FKM, HNBR, EPDM O-Rings, special elastomers upon requestDrilled and threaded connections for all sizes, welded upon requestDrilled and threaded vent connections for sizes ≥ DN150 (6") < DN150 upon request, welded upon requestIncluded for all sizesIncluded for sizes ≥ DN150 (6"), < DN150 upon requestIncluded for sizes ≥ DN150 (6") or on valves of 250 kg minIncluded for sizes ≥ DN150 (6") or on valves of 250 kg minUpon requestLever, Gear box or Actuator with position indicator and locking devicePressure containing & controlling parts to EN 10204 3.1 Materials in Sour Service according to NACE MR0175, MR0103, ISO 15156 Non-destructive testing (NDT) to API 6D, ASME B16.34Hydrostatic & pneumatic testing to API 6D, ASME B16.34, ISO 5208, API 6A, ISO 10423 (others upon request), Hyperbaric testing according to API 6DSS upon request

Trunnion Ball Valves • Technical Features

ConstructionPortStem retentionLeakage rateAntistatic device

Pressure reliefSealing

DrainVentStem grease injectorsSeat grease injectorsLifting pointsSupport feetStem extensionValve operationMaterial testing

Valve testing

Standard Features

DesignDesign pressureBody wall thicknessFace to FaceTemperature rangePressures rangeSize rangeEnd connections

API 6D, API 6DSS, API 6A, ASME B16.34, ISO 14313, ISO 10423, ISO 17292ASME B16.34, EN 1092-1, ISO 17292ASME B16.34, ASME VIII Div. I, ISO 17292API 6D, ASME B16.10 Long pattern-196° to 1100°C (-320,8°F to 2012°F)PN20 (ANSI 150) to PN420 (ANSI 2500)DN15 (1/2") to DN1800 (72")ASME B16.5 ≤ DN600 (24") Flanged RF,FF,RTJ MSS-SP-44 = DN550 (22") Flanged RF,FF,RTJ ASME B16.47 A ≥ DN650 (26") Flanged RF,FF,RTJ ASME B16.25 Butt-Weld BW Clump (HUB), EN1092-1, Norsok L-005, Gost 12815-80

Technical Data ApprovalsSafety Integrity LevelFire SafeArea ClassificationPressure Equipment DirectiveFugitive EmissionConstruction

SIL 3API 607, API 6FA, BS 6755, ISO 10497-5ATEX 94/9/ECPED 97/23/EC ISO 15848/1API 6D, API 6DSS

Valve size range

One, two or three pieceReduced bore, full bore or fully piggableAnti blow-out stemISO 5208Included, the ball valve design includes an electric conductive connection between the internal parts of the ball valve and the body, providing the anti-static function.Automatic cavity relief to prevent overpressure in body cavity (self-relieving seats)Bi-directional, Double block & bleed (DBB) with sealing in both directions (DIB-1&2 upon request) Metal seated with Tungsten, Chrome Carbide or STELLITE coatings Primary metal secondary soft (PMSS) with differential hardness between the ball and seat to prevent galling of the substrate Soft seated with thermoplastic polymers (Nylon, PEEK, PCTFE), special polymers upon request Elastomers FKM, HNBR, EPDM O-Rings, special elastomers upon requestDrilled and threaded connections for all sizes, welded upon requestDrilled and threaded vent connections for sizes ≥ DN150 (6") < DN150 upon request, welded upon requestIncluded for all sizesIncluded for sizes ≥ DN150 (6"), < DN150 upon requestIncluded for sizes ≥ DN150 (6") or on valves of 250 kg minIncluded for sizes ≥ DN150 (6") or on valves of 250 kg minUpon requestLever, Gear box or Actuator with position indicator and locking devicePressure containing & controlling parts to EN 10204 3.1 Materials in Sour Service according to NACE MR0175, MR0103, ISO 15156 Non-destructive testing (NDT) to API 6D, ASME B16.34Hydrostatic & pneumatic testing to API 6D, ASME B16.34, ISO 5208, API 6A, ISO 10423 (others upon request), Hyperbaric testing according to API 6DSS upon request

Trunnion Ball Valves • Technical Features




Valve testing

Standard Features


API 6D, API 6DSS, API 6A, ASME B16.34, ISO 14313, ISO 10423, ISO 17292ASME B16.34, EN 1092-1, ISO 17292ASME B16.34, ASME VIII Div. I, ISO 17292API 6D, ASME B16.10 Long pattern-196° to 1100°C (-320,8°F to 2012°F)PN20 (ANSI 150) to PN420 (ANSI 2500)DN15 (1/2") to DN1800 (72")ASME B16.5 ≤ DN600 (24") Flanged RF,FF,RTJ MSS-SP-44 = DN550 (22") Flanged RF,FF,RTJ ASME B16.47 A ≥ DN650 (26") Flanged RF,FF,RTJ ASME B16.25 Butt-Weld BW Clump (HUB), EN1092-1, Norsok L-005, Gost 12815-80

Technical Data ApprovalsSafety Integrity LevelFire SafeArea ClassificationPressure Equipment DirectiveFugitive EmissionConstruction


Valve size range

7erreesse

Side Entry & Top Entry

Floating ball valves have the obturator

free from axial constraints supported

between two soft inserts; under pressure

the ball compresses the downstream soft

insert to allow sealing; these valves are

recommended for use in clean services

with limited sizes and ranting. ERREESSE

production range offers a wide selection

of models and constructions suitable for

use in chemical, hydrocarbon and critical

process industry applications.


• Threaded body

• Split body

• Seal welded body


Needle valves have no ball and are mainly

used for flow metering and damping

pressure fluctuations as instrument valves.

These valves are designed to replace

conventional multi-valve installations into

a single manifold reducing leaking points

and allowing easy and quick installations

in vertical or either in horizontal positions

with considerable cost savings.

Needle Valves

Monoflange

• DBB Mono OS&Y Needle Anti Tamper

Side Entry & Top Entry

Floating ball valves have the obturator

free from axial constraints supported

between two soft inserts; under pressure

the ball compresses the downstream soft

insert to allow sealing; these valves are

recommended for use in clean services

with limited sizes and ranting. ERREESSE

production range offers a wide selection

of models and constructions suitable for

use in chemical, hydrocarbon and critical

process industry applications.


• Threaded body

• Split body

• Seal welded body


Needle valves have no ball and are mainly

used for flow metering and damping

pressure fluctuations as instrument valves.

These valves are designed to replace

conventional multi-valve installations into

a single manifold reducing leaking points

and allowing easy and quick installations

in vertical or either in horizontal positions

with considerable cost savings.

Needle Valves

Monoflange

• DBB Mono OS&Y Needle Anti Tamper

8 erreesse

Floating Ball Valves • Technical Features




Valve testing

Standard Features

One, two or Three pieceReduced bore, full bore or fully piggableAnti blow-out stemISO 5208Included, the ball valve design includes an electric conductive connection between the internal parts of the ball valve and the body, providing the anti-static function.Not foreseen on valve models ≤ ANSI 600 soft seated Self-relieving seats on metal seated valves or upon requestBi-directionalMetal seated with Tungsten or Chrome Carbide coatings Soft seated with thermoplastic polymers (RPTFE, Nylon, PEEK, PCTFE), special polymers upon request Elastomers FKM, HNBR, EPDM O-Rings, special elastomers upon requestUpon requestUpon requestUpon requestUpon requestUpon requestUpon requestUpon requestLever, Gear box or Actuator with position indicator and locking devicePressure containing & controlling parts to EN 10204 3.1 Materials in Sour Service according to NACE MR0175, MR0103, ISO 15156 Non-destructive testing (NDT) to API 6D, ASME B16.34Hydrostatic & pneumatic testing to API 6D, ASME B16.34, ISO 5208 (other upon request)


API 6D, API 6DSS, ASME B16.34, ISO 14313, ISO 17292ASME B16.34, EN 1092-1, ISO 17292ASME B16.34, ASME VIII Div. I, ISO 17292API 6D, ASME B16.10 Long pattern-196° to 1100°C (-320,8°F to 2012°F)PN20 (ANSI 150) to PN420 (ANSI 2500)DN15 (1/2") to DN150 (6")ASME B16.5 Flanged RF,FF,RTJ ASME B16.25 Butt-Weld BWASME B16.11 Socket-Weld SWASME B36.10 Plain-End PEASME B1.20.1 Threaded NPT (F/M)

Technical Data Approvals

Safety Integrity LevelFire SafeArea ClassificationPressure Equipment DirectiveFugitive EmissionConstruction


Valve size range

Floating Ball Valves • Technical Features




Valve testing

Standard Features

One, two or Three pieceReduced bore, full bore or fully piggableAnti blow-out stemISO 5208Included, the ball valve design includes an electric conductive connection between the internal parts of the ball valve and the body, providing the anti-static function.Not foreseen on valve models ≤ ANSI 600 soft seated Self-relieving seats on metal seated valves or upon requestBi-directionalMetal seated with Tungsten or Chrome Carbide coatings Soft seated with thermoplastic polymers (RPTFE, Nylon, PEEK, PCTFE), special polymers upon request Elastomers FKM, HNBR, EPDM O-Rings, special elastomers upon requestUpon requestUpon requestUpon requestUpon requestUpon requestUpon requestUpon requestLever, Gear box or Actuator with position indicator and locking devicePressure containing & controlling parts to EN 10204 3.1 Materials in Sour Service according to NACE MR0175, MR0103, ISO 15156 Non-destructive testing (NDT) to API 6D, ASME B16.34Hydrostatic & pneumatic testing to API 6D, ASME B16.34, ISO 5208 (other upon request)


API 6D, API 6DSS, ASME B16.34, ISO 14313, ISO 17292ASME B16.34, EN 1092-1, ISO 17292ASME B16.34, ASME VIII Div. I, ISO 17292API 6D, ASME B16.10 Long pattern-196° to 1100°C (-320,8°F to 2012°F)PN20 (ANSI 150) to PN420 (ANSI 2500)DN15 (1/2") to DN150 (6")ASME B16.5 Flanged RF,FF,RTJ ASME B16.25 Butt-Weld BWASME B16.11 Socket-Weld SWASME B36.10 Plain-End PEASME B1.20.1 Threaded NPT (F/M)

Technical Data Approvals

Safety Integrity LevelFire SafeArea ClassificationPressure Equipment DirectiveFugitive EmissionConstruction


Valve size range

9erreesse

Actuated & Manual Ball Valves engineered to suit a wide range of Oil & Gas production processing, transportation, distribution, chemical and petrochemical refining, from low to high pressure applications with specific models suitable for high-integrity pressure protection systems (HIPPS) accredited by the most important International Standards

www.erreesse-valves.com

Actuated & Manual Ball Valves engineered to suit a wide range of Oil & Gas production processing, transportation, distribution, chemical and petrochemical refining, from low to high pressure applications with specific models suitable for high-integrity pressure protection systems (HIPPS) accredited by the most important International Standards


10 erreesse

Split body valves

On/Off valves are engineered to regulate the flow by opening and closing the port, recommended on

tight shut-off gas and liquid services

Control valves are engineered for those services where continuous pressure and flow rate

regulation are required

ERREESSE Control Valves are mainly

suitable for liquid, steam and gas

applications in standard and severe

services. Optimum cavitation, noise,

choke and flashing control with very

high capacity and high FL values in

throttling service, low recovery trim

with low cavitation potential, low

vibrations and Self-Cleaning, Multipath

and Low noise features.

Split body valves

On/Off valves are engineered to regulate the flow by opening and closing the port, recommended on

tight shut-off gas and liquid services

Control valves are engineered for those services where continuous pressure and flow rate

regulation are required

11erreesse

ERREESSE Control Valves are mainly

suitable for liquid, steam and gas

applications in standard and severe

services. Optimum cavitation, noise,

choke and flashing control with very

high capacity and high FL values in

throttling service, low recovery trim

with low cavitation potential, low

vibrations and Self-Cleaning, Multipath

and Low noise features.


Compact design Floating constructions

Special alloys & constructions for high risk industry applications

Valves for chemical injection with check valve and quill

Primary Isolation withsingle block constructions


Compact design Floating constructions

Primary Isolation withsingle block constructions

Valves for chemical injection with check valve and quill

12 erreesse

Special alloys & constructions for high risk industry applications

Modular, Integral Block and Bleed Valves and DBB, two valves in one

High performance valves engineered and manufactured to provide a compact and reliable alternative to multiple

instrument valve systems, reducing leak paths and saving installation and maintenance costs

ERREESSE Modular valves, Integral Block

and Bleed Valves (EEMUA182) and Double

block and bleed assemblies (DBB) are reliable

solutions for isolation systems, pressure level

and flow measurements, instrument drain

for tanks and pipes, chemical injection and

sampling systems in low and high pressures

widely used where cost, weight and space

saving are valve selecting factors, maintaining

high quality performance expectations: two

ball valves , independently operable, in a

single bolted body, with an intermediate

needle valve for venting service. The modular

design is an approach that subdivides a

system into smaller parts (modules) that can

be independently operated and then used to

drive multiple functionalities.

Modular, Integral Block and Bleed Valves and DBB, two valves in one

High performance valves engineered and manufactured to provide a compact and reliable alternative to multiple

instrument valve systems, reducing leak paths and saving installation and maintenance costs

ERREESSE Modular valves, Integral Block

and Bleed Valves (EEMUA182) and Double

block and bleed assemblies (DBB) are reliable

solutions for isolation systems, pressure level

and flow measurements, instrument drain

for tanks and pipes, chemical injection and

sampling systems in low and high pressures

widely used where cost, weight and space

saving are valve selecting factors, maintaining

high quality performance expectations: two

ball valves , independently operable, in a

single bolted body, with an intermediate

needle valve for venting service. The modular

design is an approach that subdivides a

system into smaller parts (modules) that can

be independently operated and then used to

drive multiple functionalities.

13erreesse

Top entry valves, in-line maintenance solution

Special valve constructions to allow easy on-site maintenance and disassembly with quick access to

ball and seats for inspection and repairERREESSE Top Entry valves are suitable

for compression and re-injection systems,

transmission pipelines, metering skids,

Pig-launchers and receiving stations, Off-

Shore and On-Shore platforms, gas storage

and separations systems suitable for a wide

range of high risk industry applications

from severe abrasive and slurry to high

temperature and cryogenic services, from

subsea and LNG plants to topside installations.

Top Entry non-contact valves (Rising stem

and Eccentric ball type) are suitable for gas

processing plants where frequent cycling and

tight shut-off are required.

ERREESSE Top Entry valves can be welded

directly onto the pipeline or to the manifold

assembly.

Fully welded valves

Fully welded constructions are a preferable solution when no maintenance is required on above ground or below ground

buried pipeline installations

Top entry valves, in-line maintenance solution

Special valve constructions to allow easy on-site maintenance and disassembly with quick access to

ball and seats for inspection and repairERREESSE Top Entry valves are suitable

for compression and re-injection systems,

transmission pipelines, metering skids,

Pig-launchers and receiving stations, Off-

Shore and On-Shore platforms, gas storage

and separations systems suitable for a wide

range of high risk industry applications

from severe abrasive and slurry to high

temperature and cryogenic services, from

subsea and LNG plants to topside installations.

Top Entry non-contact valves (Rising stem

and Eccentric ball type) are suitable for gas

processing plants where frequent cycling and

tight shut-off are required.

ERREESSE Top Entry valves can be welded

directly onto the pipeline or to the manifold

assembly.

Fully welded valves

Fully welded constructions are a preferable solution when no maintenance is required on above ground or below ground

buried pipeline installations

15erreesse

121° to 1100°C (249,8° to 2012°F)

Heating to boiling points, catalytic

and hydro-treatments are some of

the refining processes necessary

to separate crude oil into storable

fractions like marketable oils and

condensate; most of these processes

take part at high temperatures, from

121°C to 1100°C (249,8°C to 2012°F).

ERREESSE production range offers

valves engineered to withstand and

exceed high temperature applications

with specific constructions and duly

selected materials.

0° to -50°C (32° to -58°F)

When Natural Gas has to be separated

into fractions or treated to protect

equipment from contaminants

(acids), first stage of sweetening and

acid removal take part at 0° to -50°C

(32° to -58°F) before gas liquefaction

stage; propane or a mixture with

other gases in small quantities is the

cooling element.

-51° to -196°C (-59,8° to -320,8°F)




(acids), sweetening and acid

removal at -51° to -196°C (-59,8°

to -320,8°F), are the final stage to

do that, starting from liquefaction

to sub-cooling stages, with pure

or mixed refrigerants (methane,

nitrogen) as cooling elements.

High Temperature Low Temperature Cryogenic

Trunnion Ball ValvesIndustry applications

The application and the process fluid characteristics are the main factors in selecting a valve type and valve construction materials: clean fluids generally allow a wide range of valves and materials, while for dirty fluids and high risk industry applications the choice is limited to few valve types and selected materials. ERREESSE production range offers a wide selection of valves suitable for Topside and Subsea installations

121° to 1100°C (249,8° to 2012°F)

Heating to boiling points, catalytic

and hydro-treatments are some of

the refining processes necessary

to separate crude oil into storable

fractions like marketable oils and

condensate; most of these processes

take part at high temperatures, from

121°C to 1100°C (249,8°C to 2012°F).

ERREESSE production range offers

valves engineered to withstand and

exceed high temperature applications

with specific constructions and duly

selected materials.

0° to -50°C (32° to -58°F)




(acids), first stage of sweetening and

acid removal take part at 0° to -50°C

(32° to -58°F) before gas liquefaction

stage; propane or a mixture with

other gases in small quantities is the

cooling element.

-51° to -196°C (-59,8° to -320,8°F)




(acids), sweetening and acid

removal at -51° to -196°C (-59,8°

to -320,8°F), are the final stage to

do that, starting from liquefaction

to sub-cooling stages, with pure

or mixed refrigerants (methane,

nitrogen) as cooling elements.

High Temperature Low Temperature Cryogenic

Trunnion Ball ValvesIndustry applications

The application and the process fluid characteristics are the main factors in selecting a valve type and valve construction materials: clean fluids generally allow a wide range of valves and materials, while for dirty fluids and high risk industry applications the choice is limited to few valve types and selected materials. ERREESSE production range offers a wide selection of valves suitable for Topside and Subsea installations

16 erreesse

Aggressive and solid contaminants

Corrosion is a gradual loss of material

by chemical or physical reaction

with the process fluid; depending

on concentration, temperature and

pressure drop the exposed to fluid

surfaces can be seriously damaged

impairing the performance of the

valve, unless the correct valve type

and materials are selected.

ERREESSE valve ranges includes

special models suitable for severe

abrasive, slurry, scaling, fouling and

solidifying services.

Design pressure from 20 bar(g)

to 1035 bar(g), in combination

with other service conditions in

hydrocarbon processes, refining

and petrochemistry, determinates

ball valve construction and material

selection.

Corrosive & Dirty High Pressure


0° to 120°C (32° to 248°F)

Instrument air, diesel oil, lube

oil, demineralized water, steam,

nitrogen and other produced gas

are considered as clean services for

utility applications: low pressure

applications, on topside above ground

and below ground installations, from

0° to 120°C (32° to 248°F), carrying

standard non corrosive and clean

fluids, free from solid particles or

aggressive contaminants, providing

just a service to main processes.

Utility

Aggressive and solid contaminants

Corrosion is a gradual loss of material

by chemical or physical reaction

with the process fluid; depending

on concentration, temperature and

pressure drop the exposed to fluid

surfaces can be seriously damaged

impairing the performance of the

valve, unless the correct valve type

and materials are selected.

ERREESSE valve ranges includes

special models suitable for severe

abrasive, slurry, scaling, fouling and

solidifying services.

Design pressure from 20 bar(g)

to 1035 bar(g), in combination

with other service conditions in

hydrocarbon processes, refining

and petrochemistry, determinates

ball valve construction and material

selection.

Corrosive & Dirty High Pressure


0° to 120°C (32° to 248°F)

Instrument air, diesel oil, lube

oil, demineralized water, steam,

nitrogen and other produced gas

are considered as clean services for

utility applications: low pressure

applications, on topside above ground

and below ground installations, from

0° to 120°C (32° to 248°F), carrying

standard non corrosive and clean

fluids, free from solid particles or

aggressive contaminants, providing

just a service to main processes.

Utility

17erreesse

Valves engineered to meet the most critical and hostile conditions in the subsea environment and underwater installations

Subsea Ball Valves

Valves engineered to meet the most critical and hostile conditions in the subsea environment and underwater installations

Subsea Ball Valves

18 erreesse

Reliable solution for underwater installations

ERREESSE Subsea ball valves have been designed to meet the

most critical and hostile conditions in the subsea environment

and underwater installations at extreme pressures and high

levels concentrations of H2S, CO2 or solid particles.

These valves are engineered to meet API 6DSS & API

17D Standards for Subsea installations down to 3000m

(10000ft) water depth; they can be manufactured in different

constructions, with bolted body Side entry or Top entry and

Fully welded body, to suit the most demanding Customer

specifications. ERREESSE Subsea ball valves can be supplied

complete with subsea gearbox or actuator and customized ROV

couplings (horizontal or vertical). In-house hyperbaric testing

can be performed upon request.

Reliable solution for underwater installations

ERREESSE Subsea ball valves have been designed to meet the

most critical and hostile conditions in the subsea environment

and underwater installations at extreme pressures and high

levels concentrations of H2S, CO2 or solid particles.

These valves are engineered to meet API 6DSS & API

17D Standards for Subsea installations down to 3000m

(10000ft) water depth; they can be manufactured in different

constructions, with bolted body Side entry or Top entry and

Fully welded body, to suit the most demanding Customer

specifications. ERREESSE Subsea ball valves can be supplied

complete with subsea gearbox or actuator and customized ROV

couplings (horizontal or vertical). In-house hyperbaric testing

can be performed upon request.

19erreesse


ERREESSE Ball Valves engineering, manufacturing and testing processes are covered by a Quality Assurance program certified and continuously audited by accredited inspection authorities


ERREESSE Ball Valves engineering, manufacturing and testing processes are covered by a Quality Assurance program certified and continuously audited by accredited inspection authorities

20 erreesse

Certifications & Quality Assurance.

• ISO 18001: 2007 Occupational Health and

Safety Management Systems

• ISO 14001: 2004 Environmental

Management System

• ISO 9001: 2008 for design, production and

after sales of ball valves

• Pressure Equipment Directive Module H PED

97/23/EC (Module G upon request)

• Safety Integrity Level SIL 3

• AtEx 94/9/EC Directive for equipment

and protective systems intended for use

in potentially explosive atmosphere

• Specification for Pipeline Valves API 6D &

Specification for Subsea Pipeline Valves

API 6DSS

• TR CU 032 (Gost-R)

Each valve is identified by a Serial Number with

relevant EN 10204 3.1 material certificate

for pressure containing and retaining parts

and pressure test report.

A Third Part inspector can witness every

production activity, starting from raw material

production to final test and issue a certificate

in accordance with EN 10204 3.2.

All activities are conducted to meet the requirements of ISO 9001 as fundamental

of our Quality Management System

ERREESSE ball valves are designed to meet

the Fire Safe requirements according to

BS6755 P.2, API 607, API6FA and ISO 10497

and Fugitive Emission according to ISO

15848/1. Qualification tests covering the

whole production range have been witnessed

by independent inspectors.

Certifications & Quality Assurance.

All activities are conducted to meet the requirements of ISO 9001 as fundamental

of our Quality Management System

ERREESSE ball valves are designed to meet

the Fire Safe requirements according to

BS6755 P.2, API 607, API6FA and ISO 10497

and Fugitive Emission according to ISO

15848/1. Qualification tests covering the

whole production range have been witnessed

by independent inspectors.

21erreesse

• ISO 18001: 2007 Occupational Health and

Safety Management Systems

• ISO 14001: 2004 Environmental

Management System

• ISO 9001: 2008 for design, production and

after sales of ball valves

• Pressure Equipment Directive Module H PED

97/23/EC (Module G upon request)

• Safety Integrity Level SIL 3

• AtEx 94/9/EC Directive for equipment

and protective systems intended for use

in potentially explosive atmosphere

• Specification for Pipeline Valves API 6D &

Specification for Subsea Pipeline Valves

API 6DSS

• TR CU 032 (Gost-R)

Each valve is identified by a Serial Number with

relevant EN 10204 3.1 material certificate

for pressure containing and retaining parts

and pressure test report.

A Third Part inspector can witness every

production activity, starting from raw material

production to final test and issue a certificate

in accordance with EN 10204 3.2.

ERREESSE is a reliable combination of Made in Italy, short deliveries and in-house testing services

All inspections and tests are performed by qualified and

experienced personnel in line with project specifications

and data sheets in order to satisfy our Customers and their

Commitments’ expectations.

The following tests are performed according to API 6D, API 6DSS, API 6A, API 17D,

API 598, EN12266-1 or to Customer specific requirements:

Pressure & Functional Testing

Testing & Quality Control

• Hydrostatic testing

• Low pressure gas seat testing

• High pressure gas testing

• Cryogenic gas testing down to -196°C (-320,8°F)

• High temperature testing up to 660°C (1220°F)

• Fugitive emission gas testing

• Antistatic testing

• Torque testing

• Cavity relief testing

• Double Block & Bleed (DBB) testing

• Double Isolation & Bleed (DIB-1, DIB-2) testing

• Hyperbaric qualification testing for subsea valves

Hyperbaric testing

Torque testing

Functional testing with actuator

Cryogenic testing Pressure testing

Testing area

ERREESSE is a reliable combination of Made in Italy, short deliveries and in-house testing services

All inspections and tests are performed by qualified and

experienced personnel in line with project specifications

and data sheets in order to satisfy our Customers and their

Commitments’ expectations.

The following tests are performed according to API 6D, API 6DSS, API 6A, API 17D,

API 598, EN12266-1 or to Customer specific requirements:

Pressure & Functional Testing

Testing & Quality Control

• Hydrostatic testing

• Low pressure gas seat testing

• High pressure gas testing

• Cryogenic gas testing down to -196°C (-320,8°F)

• High temperature testing up to 660°C (1220°F)

• Fugitive emission gas testing

• Antistatic testing

• Torque testing

• Cavity relief testing

• Double Block & Bleed (DBB) testing

• Double Isolation & Bleed (DIB-1, DIB-2) testing

• Hyperbaric qualification testing for subsea valves

Hyperbaric testing

Torque testing

Functional testing with actuator

Cryogenic testing Pressure testing

Testing area

22 erreesse

The following tests can be performed by 2nd Level

EN473-ISO9712/SN-TC-1A Qualified personnel:

● VT (Visual testing)

● UT (Ultrasonic testing)

● PT (Penetrant testing)

● MT (Magnetic particle testing by Joke)

● LT (Leak testing)

● PMI (Positive Material Identification)

● Hardness test

● Ferrite test

Thanks to a strong cooperation with Chemical Laboratories the following

tests can be performed according to Customer’s and project specifications:

● Mechanical and Impact test down to – 196°C

● Chemical analysis check

● Corrosion tests

● Micro examinations

● Ferrite check

● Hydrogen-Inducted Cracking test (HIC)

● Sulphide Stress Corrosion Cracking (SSCC)

Non-Destructive Testing (NDT)

Destructive Testing

Fugitive Emission testing Magnetic testing Positive Material Identification Penetrant testing

Ultrasonic testing

Ferrite test

Mechanical testing Impact tested sample Corrosion tests

HIC & SSCC

Hardness test

The following tests can be performed by 2nd Level

EN473-ISO9712/SN-TC-1A Qualified personnel:

● VT (Visual testing)

● UT (Ultrasonic testing)

● PT (Penetrant testing)

● MT (Magnetic particle testing by Joke)

● LT (Leak testing)

● PMI (Positive Material Identification)

● Hardness test

● Ferrite test

Thanks to a strong cooperation with Chemical Laboratories the following

tests can be performed according to Customer’s and project specifications:

● Mechanical and Impact test down to – 196°C

● Chemical analysis check

● Corrosion tests

● Micro examinations

● Ferrite check

● Hydrogen-Inducted Cracking test (HIC)

● Sulphide Stress Corrosion Cracking (SSCC)

Non-Destructive Testing (NDT)

Destructive Testing

Fugitive Emission testing Magnetic testing Positive Material Identification Penetrant testing

Ultrasonic testing

Ferrite test

Mechanical testing Impact tested sample Corrosion tests

HIC & SSCC

Hardness test

23erreesse

Cv calculations

Cv

Size

1/2"

3/4"

1"

1,1/2"

2"

3"

4"

6"

8"

10"

12"

14"

16"

18"

20"

24"

26"

28"

32"

36"

3/4" x 1/2"

1" x 3/4"

11/2" x 1"

2" x 11/2"

3" x 2"

4" x 3"

6" x 4"

8" x 6"

10" x 6"

10" x 8"

12" x 8"

12" x 10"

14" x 12"

14" x 10"

16" x 14"

16" x 12"

18" x 14"

20" x 18"

20" x 16"

24" x 20"

28" x 24"

ASME

150

19

42

82

218

420

1230

2457

5294

10456

16317

26087

30384

42374

52499

61094

93248

122964

131929

160361

232773

11

21

46

144

193

565

811

2198

1850

4576

3350

6778

-

5823

14354

-

9356

-

17866

-

-

ASME

300

17

37

77

207

409

1108

2129

5163

9613

15821

25311

28829

40407

51043

60010

93566

117871

126883

180619

218665

11

20

44

142

192

521

811

2108

1816

4361

3138

6666

-

-

-

-

9099

36532

-

27746

-

ASME

600

15

33

66

184

393

1001

1835

4539

8868

14362

22257

27632

37157

48562

58682

92523

109297

118277

167221

199104

10

19

41

131

186

458

757

2072

1804

4382

3007

6228

13358

-

15251

-

8999

-

16331

27223

-

ASME

900

14

30

61

164

324

898

1784

4345

8457

14160

20741

25935

34062

42615

55170

86066

95898

112620

-

-

9

19

40

128

185

438

748

2045

-

4577

2978

7186

13016

-

-

-

-

-

15090

25400

26119

ASME

1500

14

30

53

164

324

860

1676

3807

7525

11141

17239

20375

27703

35155

45506

70272

-

-

-

-

9

18

38

126

183

424

713

2005

-

4302

-

8437

11383

-

-

8938

-

-

-

-

-

ASME

2500

12

27

48

146

228

534

1120

2513

5311

8335

12328

-

-

-

-

-

-

-

-

-

9

18

38

91

183

415

695

1965

-

4258

-

-

-

-

-

-

-

-

-

-

-

Cv calculations

Cv

Size

1/2"

3/4"

1"

1,1/2"

2"

3"

4"

6"

8"

10"

12"

14"

16"

18"

20"

24"

26"

28"

32"

36"

3/4" x 1/2"

1" x 3/4"

11/2" x 1"

2" x 11/2"

3" x 2"

4" x 3"

6" x 4"

8" x 6"

10" x 6"

10" x 8"

12" x 8"

12" x 10"

14" x 12"

14" x 10"

16" x 14"

16" x 12"

18" x 14"

20" x 18"

20" x 16"

24" x 20"

28" x 24"

ASME

150

19

42

82

218

420

1230

2457

5294

10456

16317

26087

30384

42374

52499

61094

93248

122964

131929

160361

232773

11

21

46

144

193

565

811

2198

1850

4576

3350

6778

-

5823

14354

-

9356

-

17866

-

-

ASME

300

17

37

77

207

409

1108

2129

5163

9613

15821

25311

28829

40407

51043

60010

93566

117871

126883

180619

218665

11

20

44

142

192

521

811

2108

1816

4361

3138

6666

-

-

-

-

9099

36532

-

27746

-

ASME

600

15

33

66

184

393

1001

1835

4539

8868

14362

22257

27632

37157

48562

58682

92523

109297

118277

167221

199104

10

19

41

131

186

458

757

2072

1804

4382

3007

6228

13358

-

15251

-

8999

-

16331

27223

-

ASME

900

14

30

61

164

324

898

1784

4345

8457

14160

20741

25935

34062

42615

55170

86066

95898

112620

-

-

9

19

40

128

185

438

748

2045

-

4577

2978

7186

13016

-

-

-

-

-

15090

25400

26119

ASME

1500

14

30

53

164

324

860

1676

3807

7525

11141

17239

20375

27703

35155

45506

70272

-

-

-

-

9

18

38

126

183

424

713

2005

-

4302

-

8437

11383

-

-

8938

-

-

-

-

-

ASME

2500

12

27

48

146

228

534

1120

2513

5311

8335

12328

-

-

-

-

-

-

-

-

-

9

18

38

91

183

415

695

1965

-

4258

-

-

-

-

-

-

-

-

-

-

-

24 erreesse

Kv

Size

1/2"

3/4"

1"

1,1/2"

2"

3"

4"

6"

8"

10"

12"

14"

16"

18"

20"

24"

26"

28"

32"

36"

3/4" x 1/2"

1" x 3/4"

11/2" x 1"

2" x 11/2"

3" x 2"

4" x 3"

6" x 4"

8" x 6"

10" x 6"

10" x 8"

12" x 8"

12" x 10"

14" x 12"

14" x 10"

16" x 14"

16" x 12"

18" x 14"

20" x 18"

20" x 16"

24" x 20"

28" x 24"

ASME

150

17

36

71

189

363

1064

2126

4579

9045

14115

22567

26284

36656

45415

52850

80665

106371

114126

164672

201361

10

18

40

124

167

489

702

1901

1600

3959

2898

5863

-

5037

12417

-

8093

-

15455

-

-

ASME

300

15

32

66

179

353

959

1842

4466

8316

13686

21895

24939

34954

44155

51911

80940

101965

109760

156245

189156

9

18

38

123

166

451

701

1823

1571

3772

2714

5767

-

-

-

-

7871

31602

-

24002

-

ASME

600

13

28

57

159

340

866

1588

3926

7671

12424

19254

23903

32143

42008

50763

80124

94548

102316

144654

172235

9

16

36

113

161

396

655

1793

1560

3791

2601

5474

11555

-

13193

-

7785

-

14127

23549

-

ASME

900

12

26

53

142

281

777

1544

3759

7316

12249

17942

22435

29466

36864

47725

74452

82957

97422

-

-

8

16

35

111

160

379

647

1769

-

3960

2576

6217

11260

-

-

-

-

-

13054

21972

22595

ASME

1500

12

26

46

142

281

744

1450

3293

6510

9338

14912

17625

23964

30411

39365

60789

-

-

-

-

8

16

32

109

158

367

617

1734

-

3722

-

7299

9847

-

-

7732

-

-

-

-

-

ASME

2500

11

24

41

126

198

462

969

2173

4594

7210

10664

-

-

-

-

-

-

-

-

-

8

16

33

78

158

359

602

1700

-

3683

-

-

-

-

-

-

-

-

-

-

-

Kv calculations

Kv

Size

1/2"

3/4"

1"

1,1/2"

2"

3"

4"

6"

8"

10"

12"

14"

16"

18"

20"

24"

26"

28"

32"

36"

3/4" x 1/2"

1" x 3/4"

11/2" x 1"

2" x 11/2"

3" x 2"

4" x 3"

6" x 4"

8" x 6"

10" x 6"

10" x 8"

12" x 8"

12" x 10"

14" x 12"

14" x 10"

16" x 14"

16" x 12"

18" x 14"

20" x 18"

20" x 16"

24" x 20"

28" x 24"

ASME

150

17

36

71

189

363

1064

2126

4579

9045

14115

22567

26284

36656

45415

52850

80665

106371

114126

164672

201361

10

18

40

124

167

489

702

1901

1600

3959

2898

5863

-

5037

12417

-

8093

-

15455

-

-

ASME

300

15

32

66

179

353

959

1842

4466

8316

13686

21895

24939

34954

44155

51911

80940

101965

109760

156245

189156

9

18

38

123

166

451

701

1823

1571

3772

2714

5767

-

-

-

-

7871

31602

-

24002

-

ASME

600

13

28

57

159

340

866

1588

3926

7671

12424

19254

23903

32143

42008

50763

80124

94548

102316

144654

172235

9

16

36

113

161

396

655

1793

1560

3791

2601

5474

11555

-

13193

-

7785

-

14127

23549

-

ASME

900

12

26

53

142

281

777

1544

3759

7316

12249

17942

22435

29466

36864

47725

74452

82957

97422

-

-

8

16

35

111

160

379

647

1769

-

3960

2576

6217

11260

-

-

-

-

-

13054

21972

22595

ASME

1500

12

26

46

142

281

744

1450

3293

6510

9338

14912

17625

23964

30411

39365

60789

-

-

-

-

8

16

32

109

158

367

617

1734

-

3722

-

7299

9847

-

-

7732

-

-

-

-

-

ASME

2500

11

24

41

126

198

462

969

2173

4594

7210

10664

-

-

-

-

-

-

-

-

-

8

16

33

78

158

359

602

1700

-

3683

-

-

-

-

-

-

-

-

-

-

-

Kv calculations

25erreesse

American Petroleum Institute (API):

API 6A, API 6D, API 17D, API 6DSS, API 6FA, API 607, API 608,

API 598

American Society of Mechanical Engineers (ASME):

ASME B1.20.1, ASME B16.5, ASME B16.10, ASME B16.11, ASME

B16.25, ASME B16.34, ASME B16.47, ASME B31.3, ASME B31.4,

ASME B31.8, ASME IX, ASME VIII (divisions 1 & 2)

Manufacturers Standardization Society of the Valve and

Fittings Industry, Inc. (MSS):

MSS SP25, MSS SP43, MSS SP44, MSS SP45, MSS SP53, MSS

SP54, MSS SP55, MSS SP58, MSS SP6, MSS SP61, MSS SP72,

MSS SP82, MSS SP9, MSS SP93, MSS SP95

British Standards Institute (BS):

BS 1503, BS 1504, BS 1560, BS 2080, BS 4504, BS 5146, BS

5351, BS 6364, BS 6755, BS EN558, BS EN1503, BS EN1626, BS

EN1983, BS EN5211, BS EN12266, BS EN12516, BS EN12567,

BE EN12570, BE EN12627, BE EN12982

International Organization for Standardization (ISO):

ISO 5208, ISO 10423, ISO 10497, ISO 12490, ISO 13623, ISO

13628, ISO 14313, ISO 14723, ISO 15156-3, ISO 15590, ISO

15607, ISO 15609, ISO 15614-7, ISO 15848 (parts 1 & 2), ISO

17292

American Society for Testing and Materials (ASTM):

ASTM E94, ASTM E142, ASTM E165, ASTM E280, ASTM E446,

ASTM 562, ASTM E709, ASTM G48

National Association of Corrosion Engineers-Corrosion

Resistant (NACE):

NACE MR0175, NACE MR0103, NACE TM0187, NACE TM0284

Engineering

Standardization

Industry Applications

Normative References

ERREESSE Valves can be engineered, designed, manufactured and tested according to the following International Standards:

American Petroleum Institute (API):

API 6A, API 6D, API 17D, API 6DSS, API 6FA, API 607, API 608,

API 598

American Society of Mechanical Engineers (ASME):

ASME B1.20.1, ASME B16.5, ASME B16.10, ASME B16.11, ASME

B16.25, ASME B16.34, ASME B16.47, ASME B31.3, ASME B31.4,

ASME B31.8, ASME IX, ASME VIII (divisions 1 & 2)

Manufacturers Standardization Society of the Valve and

Fittings Industry, Inc. (MSS):

MSS SP25, MSS SP43, MSS SP44, MSS SP45, MSS SP53, MSS

SP54, MSS SP55, MSS SP58, MSS SP6, MSS SP61, MSS SP72,

MSS SP82, MSS SP9, MSS SP93, MSS SP95

British Standards Institute (BS):

BS 1503, BS 1504, BS 1560, BS 2080, BS 4504, BS 5146, BS

5351, BS 6364, BS 6755, BS EN558, BS EN1503, BS EN1626, BS

EN1983, BS EN5211, BS EN12266, BS EN12516, BS EN12567,

BE EN12570, BE EN12627, BE EN12982

International Organization for Standardization (ISO):

ISO 5208, ISO 10423, ISO 10497, ISO 12490, ISO 13623, ISO

13628, ISO 14313, ISO 14723, ISO 15156-3, ISO 15590, ISO

15607, ISO 15609, ISO 15614-7, ISO 15848 (parts 1 & 2), ISO

17292

American Society for Testing and Materials (ASTM):

ASTM E94, ASTM E142, ASTM E165, ASTM E280, ASTM E446,

ASTM 562, ASTM E709, ASTM G48

National Association of Corrosion Engineers-Corrosion

Resistant (NACE):

NACE MR0175, NACE MR0103, NACE TM0187, NACE TM0284

Engineering

Standardization

Industry Applications

Normative References

ERREESSE Valves can be engineered, designed, manufactured and tested according to the following International Standards:

erreesse26

Carbon steel

ASTM A105, A105N

ASTM A216 WCB, WCC

ASTM A217 WC6, WC9, CW6, C12

ASTM A350 LF2, LF3, LF6

ASTM A352 LCB, LCC, LC3

ASTM A694 F52, F60, F65

Stainless steel, Duplex, Super Duplex

ASTM A182 F11, F20, F22, F304/F304L, F316/F316L, F316H, F316Ti, F321, F347, F347H, F44

ASTM A182 F5, F51, F52, F53, F55

ASTM A182 F60, F65, F6A, F6B, F6NM F9, F91, FXM19

ASTM A276/A479 304/304L, 316/316L, 316H, 316Ti, 321, 347, 347H, 904L

ASTM A351 CK3MCuN, CA15, CF8, CF3, CF8M, CF3M, CG8M, CF8C

ASTM A479 S31254, S31803, S20910, S32750, S32760, S41000, S41400, S41300, S17400

ASTM A479 S31803, S32750, S32760, S20910, S41000, S41400, S41300, S17400

ASTM A739 B11, B22

Nickel Alloys

ASTM N08825, N06625, N04400, N08020, N07750, N07718, N08926, N07725,

N05500, Hastelloy C-276, Alloy 59

Titanium

ASTM B348 (Gr. 2 & 5), ASTM B381 F2

Bronze, Aluminum-Bronze

ASTM B148 UNS C95500, C95800, C63200, ASTM B62

Not listed materials are available upon request.

ERREESSE Valves can be manufactured in the following materials:

Materials

Carbon steel

ASTM A105, A105N

ASTM A216 WCB, WCC

ASTM A217 WC6, WC9, CW6, C12

ASTM A350 LF2, LF3, LF6

ASTM A352 LCB, LCC, LC3

ASTM A694 F52, F60, F65

Stainless steel, Duplex, Super Duplex

ASTM A182 F11, F20, F22, F304/F304L, F316/F316L, F316H, F316Ti, F321, F347, F347H, F44

ASTM A182 F5, F51, F52, F53, F55

ASTM A182 F60, F65, F6A, F6B, F6NM F9, F91, FXM19

ASTM A276/A479 304/304L, 316/316L, 316H, 316Ti, 321, 347, 347H, 904L

ASTM A351 CK3MCuN, CA15, CF8, CF3, CF8M, CF3M, CG8M, CF8C

ASTM A479 S31254, S31803, S20910, S32750, S32760, S41000, S41400, S41300, S17400

ASTM A479 S31803, S32750, S32760, S20910, S41000, S41400, S41300, S17400

ASTM A739 B11, B22

Nickel Alloys

ASTM N08825, N06625, N04400, N08020, N07750, N07718, N08926, N07725,

N05500, Hastelloy C-276, Alloy 59

Titanium

ASTM B348 (Gr. 2 & 5), ASTM B381 F2

Bronze, Aluminum-Bronze

ASTM B148 UNS C95500, C95800, C63200, ASTM B62

Not listed materials are available upon request.

ERREESSE Valves can be manufactured in the following materials:

Materials

27erreesse

We desire to create a safe and healthy working environment and continuously work to achieve this

We desire to preserve the integrity and reputation of our company

and help our employees to avoid misconduct; we have to ensure

compliance with legal and regulatory requirements as well as with

our internal policies and directives. We aim to act in an ethical and

socially responsible manner within the laws, customs and traditions

of the countries in which we operate.

Our ambition is to avoid negative environmental impacts, enhance

positive effects and contribute to sustainable development. This

applies to all our activities. It is our responsibility to ensure

the health and safety of our employees and to safeguard the

communities and environments in which we operate and live.

It is extremely important to reach the contractual delivery date to satisfy our Customers’ and their Commitments expectations

ERREESSE has a valuable reputation on fast & on-time deliveries.

Thanks to a wide range of raw materials stock, sourced by only

selected and approved UE suppliers and to a large number of local

machining and paint shops, we are in a position to provide a high

quality Made in Italy product and a customized service in line to

project requirements and specifications, at a reasonable short time.

Health, Safety & Environment

Short deliveries

28 erreesse

We desire to create a safe and healthy working environment and continuously work to achieve this

We desire to preserve the integrity and reputation of our company

and help our employees to avoid misconduct; we have to ensure

compliance with legal and regulatory requirements as well as with

our internal policies and directives. We aim to act in an ethical and

socially responsible manner within the laws, customs and traditions

of the countries in which we operate.

Our ambition is to avoid negative environmental impacts, enhance

positive effects and contribute to sustainable development. This

applies to all our activities. It is our responsibility to ensure

the health and safety of our employees and to safeguard the

communities and environments in which we operate and live.

It is extremely important to reach the contractual delivery date to satisfy our Customers’ and their Commitments expectations

ERREESSE has a valuable reputation on fast & on-time deliveries.

Thanks to a wide range of raw materials stock, sourced by only

selected and approved UE suppliers and to a large number of local

machining and paint shops, we are in a position to provide a high

quality Made in Italy product and a customized service in line to

project requirements and specifications, at a reasonable short time.

Health, Safety & Environment

Short deliveries

erreesse

Facility ID: 5417 API is an equal opportunity employer

ERREESSE SRL Via Delle Betulle 8A/8B/8C Grignasco, Novara 28075 Italy August 1, 2014 ATTENTION: Paolo Botto RE: API MONOGRAM LICENSE NO. 6D-0766 API MONOGRAM LICENSE NO. 6DSS-0044 We have completed our review of your management system and found it acceptable. You may continue to apply the API Monogram in accordance with marking requirements as stated in the API License Agreements. ERREESSE SRL, Via Delle Betulle 8A/8B/8C, Grignasco, Novara 28075, Italy will continue to be listed on the API Composite List Website. Very truly yours, AMERICAN PETROLEUM INSTITUTE

John D. Modine Vice President JDM:kg

http://compositelist.api.org/CompanyList.ASP?IDS=Facility_ID=5417

The scope of this license includes the following product: Ball Valves QMS Exclusions: No Exclusions Identified as Applicable

ERREESSE SRL Via Delle Betulle 8A/8B/8C

Grignasco, Novara Italy

6D-0766

6D-0766

API Spec 6D

Effective Date: FEBRUARY 25, 2014 Expiration Date: FEBRUARY 25, 2017

The scope of this license includes the following product: Subsea Ball Valves QMS Exclusions: No Exclusions Identified as Applicable

ERREESSE SRL Via Delle Betulle 8A/8B/8C

Grignasco, Novara Italy

6DSS-0044

6DSS-0044

API Spec 6DSS

Effective Date: AUGUST 1, 2014 Expiration Date: FEBRUARY 25, 2017

PROJECT LOCATION CITY/REGION Customer Customer Customer MAIN Material MAIN Valve design MAIN VALVE TYPE SERVICE Main application

Ethane to Mossmorran UK Grangemouth Ineos Chemicals INEOS CS SS Top entry

Split Body

Trunnion & Floating 10"600 top entry, 8"150 split body, 2", 1"1500 A105/LF2-F316 SOFT & METAL

SEATED(-7°/+120°C) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

Wheatstone project AUSTRALIAOnslow off Western

Australia's Chevron CS SS Top entry

Split Body Floating Top entry 1"÷6" #150 LF2 - F316 (-196°/+200°C) LNG CRYOGENIC CRYOGENIC CRYOGEN

Woodside platform North West Shelf project AUSTRALIA Australia Woodside

Energy Ltd SS DS SDSS CS Split Body Trunnion & Floating 6"150-1500 A105/LF2-F316 SOFT & METAL SEATED VARIOUS CORROSIVE &

DIRTY CRYOGENIC CRYOGEN

Rumaila Oil Field IRAQ Basra Worley Parsons BP E&P CNPC CS Split body Trunnion Side Entry 14"÷20" #900 LF2 SOUR (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

QCLNG Upstream Project / Queensland Curtis LNG AUSTRALIA Gladstone

QGC (Queensland Gas Company)

CS SS Split body DBB SBB

Floating / Trunnion FE - CRYO 3/4"÷2" #150÷900 LF2 - F316

(-90°/+200°C) Fuel Gas CRYOGENIC HIGH PRESSURE HIGH PRESS

ALBA CCPP Kingdom of Bahrain

Kingdom of Bahrain GAMA Power Aluminium

Barhain F91/Alloy 718Valve in class

4500 side entry in SS F91/Alloy

Trunnion Side Entry 1"-2" 900#-4500# F91//Alloy 718 STEAM (596°C/200 bar) HIGH PRESSURE HIGH

TEMPERATURE CLEAN

ZOHR ONSHOPRE DEVELPMENT-PHASE 1 (new - in progress)

EGYPT Egypt PETROBEL - ENI CS SS DBB Trunnion & Floating 4"3"2" 150-2500 DBB LF2-F316

SOFT & METAL SEATED -45 °C / 210 °C HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

BPTT Angelin project Trinidad & Tobago

Trinidad & Tobago BPTT McDermott CS SS Split body DBB Trunnion & Floating 10”,4",3",2",1" 1500, 4"3"2"1500

DBB LF2-F316 SOFT & METAL SEATED(-7°/+120°C)

DIRTYCORROSIVE &

DIRTY HIGH PRESSURE HIGH PRESS

ROO Rumaila - Phase 1(South) FWKO Project Iraq North Rumaila BP Iraq A479 UNS

S31254 (F44)Floating DBB

w/quill

Double block&bleed 2"x1/2" #1500Metal seated,PTFE lip seals

-10 °C / 150 °C (SOUR NACE

MR0175)

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

BP MEOR UK UK BP E&P Amec CS SS Split body Trunnion & Floating 4",3",2",1" 1500, 4"3"2"1500 LF2-F316 SOFT SEATED PTFE LIP SEALS

(-120°/+100°C) DIRTY CRYOGENIC HIGH PRESSURE HIGH PRESS

Esfahan Refinery Upgrading & Revamping Project (URP) Iran Esfahan Oil

Refining Co. LTCS 4-Ways X-bore ball valves

Trunnion 1 1/2" up to 14" #150, trim 410, Metal seated

-7 °C / 120 °C (WATER

INJECTION)

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

MAJNOON OIL FIELD IRAQ Southern Iraq Shell SS Split Body Bolted Body 16"x12" #300, PEEK seat,gear box

-29 °C / 120 °C (HYDROCARBON GAS, FUEL GAS

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

Rumaila Oil Field Iraq Basra BACO LTCS Monoflange Monoflange OS&Y 2"x1/2"AMB (WATER

INJECTION SOUR NACE MR0175)

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

KARACHAGANAK FIELD KAZAKHSTAN Aksay - Kazakhstan

Karachaganak Petroleum

Operating B.V.LTCS Split body Trunnion up to 18"x14" 600# LF2/316/LIPSEAL -45 °C / 180 °C LOW

TEMPERATURECORROSIVE &

DIRTYCORROSIV

DIRTY

Tanap Trans Anatolian Natural Gas Pipeline Project TURCHIA Turchia

Tanap Dogalgaz Iletim A.S.

CS SS Top entryUnderground fully welded 18" valves, top entry 18" valve, Modulad DBB 2" valve, fully welded/bolted

body & cryogenic 1"-2"-6" valves - Mat. LF2/LF6/F316

(-196°/+200°C) LNG CRYOGENIC CRYOGENIC CRYOGEN

MARTIN LINGE FSO NORWAY North Sea TOTAL E&P NORGE AS KNOT FSO 1 AS SDSS Split body Floating side entry split body from 1/2" until 6" class

150/300/600 Hydrocarbons LOW TEMPERATURE CORROSIVE CORROSI

SOUTH RHODES POWER STATION GREECE TERNA S.A.

PUBLIC POWER

CORPORATION LTCS Split body Subsea Trunnion Sub Sea Side Entry 10" ANSI 300 LF2+3

mm INC625 Cladding 0°/+65° SUBSEA SERVICE SUBSEA SERVICE SUBSEA SER

ABKATUN-A MEXICO MEXICO PEMEX PEMEX CS SS Fully welded Trunnion side entry fully welded 20" 600# LF2/316-7°C / +120°C (SOUR NACE

MR0175

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

Shalapa Project MEXICO MEXICO PEMEX PEMEX LTCS Split body Trunnion side entry 24" to 16" 600# LF2/316+TCC/METAL SEAT RTJXBW Clean non corrosive CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

AUSTRALIA PACIFIC LNG (APLNG) UPSTREAM PHASE 1 - GAS FIELD FACILITIES

AUSTRALIA Queensland OriginAUSTRALIA

PACIFIC LNG (APLNG)

LTCS Split body Trunnion Side entry 2" 600#&1500# lf2/316/17-4PH/soft (-10/+150°C) Gas HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

BALL VALVE REFERENCE LIST INCLUDING VALVES SUPPLIED AS OEM MANUFACTURER

Combined applications

Culzean Field Development UK North Sea KBR Maersk Oil North Sea UK LTCS Split body Trunnion side entry 8" 1500# LF2/F51/F51/PEEK

(-46°+204°C)SOUR

NACEMR0175

LOW TEMPERATURE

HIGH TEMPERATURE

CORROSIVDIRTY

Zap SibNefrekhim RUSSIA Russia Danske Net Lp Nipigaz CS SS Fully welded Trunnion 12" - 28" #150 LF2/LF2 soft seated gear Clean non corrosive CLEAN CLEAN

Cats Project ERSKINE FIELD DEVELOPMENT UK UK Central Graben

Development

AMOCO UK EXPLORATION

OMPANYSS Split body Trunnion spit body 3/4" & 1/2" 2500# 316+inc

625/inc 718/nylon METHANOL (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

Golden Eagle UK North Sea CB&INexen

Petroleum UK LTD

LTCS Split Body Floating Side entry soft 1" 1500 RTJ LF2/F51/RPTFE (-46°/+200°C) SOUR NACE

HIGH TEMPERATURE

CORROSIVE & DIRTY

CORROSIVDIRTY

Beryl Alpha UK North Sea Apache North Sea PD&MS Group SS Top entry Trunnion 2"2500 F316 KEL-F LIP SEAL (-114°C+95°C) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

Ethane Off Loading & Cold Recirculation Lines UK Grangemouth Ineos

Chemicals INEOS CS SS Split Body Trunnion & Floating 1"150-1500 A105/LF2-F316 SOFT & METAL SEATED (-7°/+120°C) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

Ethane Jetties Modifications J2 UK Grangemouth Ineos

Chemicals INEOS CS SS Split Body Trunnion & Floating 1"150-1500 A105/LF2-F316 SOFT & METAL SEATED (-7°/+120°C) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

Tankfarm Grangemouth UK Grangemouth Ineos Chemicals INEOS LTCS Split body Floating Split body 3"x2" 300# LF2 / SS316 OIL & WATER CLEAN CLEAN CLEAN

Johan Sverdrup NORWAY North Sea Statoil Petroleum A.S. SS DS SDSS TI Split body Floating Side Entry 1/2"÷6"#150-2500

F316/F51/F55/B381

(-46°/+200°C SOUR (NACE) Sea

water

LOW TEMPERATURE

CORROSIVE & DIRTY HIGH PRESS

Amukpe LTF AFRICA NigeriaSeplat

Petroleum Devt Company

CS SS Split body Trunnion SIDE ENTRY 12" #150 LF2 + enp soft seated ACTUATOR Clean non corrosive CLEAN CLEAN CLEAN

Eskene West Rail project KAZAKHSTAN Kazakhstan Sea Star

International LLP

CS SS Split body Floating 2"x1.1/2" ; 3"x 2.1/2" 300# RF ActuatorDIESEL OIL / FUEL

GAS NACE MR 01.75

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

El-Merk AFRICA Algeria SONATRACH-ANADARKO LTCS Split body Trunnion 6" 900# side entry LF2 / 4140+TCC

OIL & GAS SANDY - 1.8% CO2 - 12%

H2O - NO H2SHIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM Unknown Unknown OEM CS SS Split body Trunnion 4" #150 RF LF2/ LF2 Peek Lever Clean non corrosive CLEAN CLEAN CLEAN



Operating B.V.CS SS Split body Trunnion up to 8"x6" 2500 / Floating up to 6"x4" 150

/ DBB Monoblock 2"x3/4"x2" 600 A105/316-46°C SOUR&NON

SOURLOW


DIRTY HIGH PRESS

Nawara AFRICA TUNISIAOMV

(Tunisien) Production

LTCS Split body Trunnion Side Entry 2"÷ 16"x14" #300÷900 a 350 LF2/SS316 Clean non corrosive HIGH PRESSURE HIGH PRESSURE HIGH PRESS

OEM Unknown Unknown OEM LTCS Bolted body Trunnion 3 Way 4" 150# LF2/ SS316/F6A/PEEK STANDARD NON CORROSIVE CLEAN CLEAN CLEAN

OEM Unknown Unknown OEM LTCS Fully welded Fully welded Trunnion side entry LF2/AISI 410 40" 300# ÷ 2" 150# Metal seated. Gas/Liquid HIGH


DIRTYCORROSIV

DIRTY

WAS - ABENGOA SAUDI ARABIA WAAD AL SHAMAL GE LTCS Split Body Floating up to 4" 150 - Trunnion up to 20" 300 -

Actuated -15°C/+200°C CLEAN CLEAN CLEAN



Operating B.V.LTCS Split body Trunnion up to 18"x14" 600# LF2/316/LIPSEAL -45 °C / 180 °C LOW


DIRTYCORROSIV

DIRTY



Operating B.V.LTCS Split body Trunnion up to 10" 2500# LF2/INC 625+TCC

(HVOF)/LIPSEAL -45 °C / 180 °C LOW TEMPERATURE HIGH PRESSURE CORROSIV

DIRTY

Golar Hilli FLNG Project SINGAPORE KEPPEL SHIPYARD LTD GOLAR LNG CS SS Top Entry Top Entry Floating 3/4"x1/2" - Top Entry Trunnion up

to 18", class 150 ÷ 1500 -185/65 CRYOGENIC CORROSIVE & DIRTY CRYOGEN

PAVLODAR OIL CHEMISTRY KAZAKHSTAN PavlodarRominserv SA - Pavlodar Oil

ChemistryCS SS Split body Floating 3/4"x1/2" - 4"x3" ANSI 300 / Trunnion 6"x4"

- 10"x8" ANSI 300 LF2/316 -47°C/+150°C LOW TEMPERATURE

CORROSIVE & DIRTY

CORROSIVDIRTY

Orlando Tie-Back to Ninian Central UK North Sea Wood Group CNR

International CS Split body Floating 2"4"300/600 LF2 / F316(-46°C+150°C)NACE FUEL GAS

LPG

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

EPIC OF WELLHEAD PLATFORM & LIVING QUARTERS FOR ZHDANOV B

TURKMENISTAN Galkynysh Ilk Insaat Dragon Oil CS SS Split body Floating 1/2"-2" #150-600; Trunnion mounted 10" #600 A105/F316 Clean non corrosive CLEAN CLEAN CLEAN

Captain Field DevelopmentProject UK North Sea Chevron SS DUPLEX Split body ¾” 1500# RF FB Lever Operated Floating Ball

(-196°/+200°C)LNG SOUR NACE

MR0'175CRYOGENIC CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM AZERBAIJAN Caspian Sea BP E&P BP E&P Split body

Armada, Everest, Lomond platform UK North Sea BG UKU Assets TBA Split body

Test manifold extension & additional gas lifting UK North Sea Apache North

Sea Split body

Forties Charlie UK North Sea Apache North Sea CS Split body Floating 3/4"1500 LF2 PEEK (-46°C+200°C)

NACECORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

Scott Field Development UK North Sea Amerada Hess Ltd TBA Split body

Chilldown Kinneil Brownfield & Greenfield UK North Sea AMEC

FosterWheeler BP E&P CS SS Top entry Floating and trunnion top entry from 1/2" to 8" °#150-300 -101°C / +150°C CRYOGENIC CRYOGENIC CRYOGEN

Kingfisher plant UK North Sea Marathon Oil (UK) TBA Split body

Captain Expansion Project UK North SeaTexaco North

Sea UK - Kvaerner Oil &

TBA Split body

Kingfisher plant UK North Sea Marathon Oil (UK) TBA Split body 1 1/2" 600# Floating side entry alloy 20 soft seated Clean non corrosive CLEAN CLEAN CLEAN

Greater Ekofisk Area NORWAY North Sea Conoco Phillips Total E&P Norge

Statoil Petroleum

A.S.SS DS SDSS TI Split body Floating Side Entry 1"÷4"#150-1500

F316/F51/F55/B381

(-46°/+200°C SOUR (NACE) Sea

water

LOW TEMPERATURE


Alba Field Development UK North Sea Chevron Split body

Armada, Everest, Lomond platform UK North Sea BG UKU Assets Split body

Forties Delta Well 1-2 Flowline UK North Sea Apache North

Sea DS CS Split body DBB

Trunnion & Floating 8"2"1"1500 F51 - LF2 metal seated PTFE LIP SEAL

(-46°C+200°C)NACE PRODUCED

WATER &

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

Forties Alpha - Aviat Field development UK North Sea Apache North

Sea Petrofac CS Split body Trunnion & Floating 6"3"2"1" 600 LF2 metal seated(-46°C+70°C)

NACE PRODUCED GAS

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

Scott Field Development UK North Sea Amerada Hess Ltd Split body

ADNOC replacement UAE Abu DhabiADNOC (Abu

Dhabi National Oil Company)

CS DS Split body Trunnion mounted 3" #900 LF2/F51 Clean non corrosive HIGH PRESSURE HIGH PRESSURE HIGH PRESS

Flyndre Cawdror project UK North SeaTalisman Sinopec

Energy (UK) CS SS Split body FROM 1" TO 12" VARIOUS CLASSES



DIRTY HIGH PRESS

Cidade de Maricà BRAZIL FPSO Petrobars SS DBB Modular DBB 2" F316 Clean non corrosive CLEAN CLEAN CLEAN

North Cormorant, Cormorant Alpha, Tern Alpha North Sea East

UK North Sea Taqa CS SS Split body SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

Captain Expansion Project UK North Sea Texaco North Sea UK

Kvaerner Oil & Gas CS SS Split body SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

OEM Unknown Unknown OEM CS SDSS Fully welded Trunnion Fully Welded Subsea 10"-12" ANSI150 + INC625 OVERLAY + 200umTCC LF2 / F53

SUBSEA SERVICE SOUR (NACE

MR0175)SUBSEA SERVICE CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM Unknown Unknown OEM SS Split body Trunnion Split Body 20" ANSI 900 / 30"x24" ANSI 316

-101°C / +150°C SOUR (NACE) CRYOGENIC CORROSIVE &

DIRTY HIGH PRESS

OEM Unknown Unknown OEM CS Split body Trunnion Split Body 20"x16"-12"x10"- 36"x30"-16"x14"-4"x3"-2"x1"1/2ANSI 2500/1500/600/900 LF2

-101°C / +150°C SOUR (NACE) CRYOGENIC CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM Unknown Unknown OEM CS Split body Trunnion Split Body 10"-20"-24" ANSI900 SOUR (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Unknown Unknown OEM INC Split body Trunnion Split Body 12"-8"ANSI 150 INC 825 SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Unknown Unknown OEM CS Split body Trunnion Split Body 2"-4"-6"-10" ANSI 1500 A105 SOUR (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Unknown Unknown OEM CS Split body Trunnion Split Body 32" ANSI900 + INC625 OVERLAY + 400umTCC SOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM Unknown Unknown OEM CS Split body Trunnion Split Body 42"x36" ANSI 600 / 30"x24" ANSI 300 SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

OEM MEXICO Gulf of Mexico Pemex CS Fully welded Trunnion Subsea Fully Welded 2"-4"-16" ANSI 600-1500 A105+Inconel 625 cladding metal seated



DIRTYCORROSIV

DIRTY

MAJNOON OIL FIELD IRAQ Southern Iraq Shell CS SS Fully weldedFully Welded 20" 600#; Bolted Body 2" through 24" 600#, 4" through 18" 300#, 3" through 24" 150#. Materials of contruction LF2/F316 or F316/F316 all

SOUR (NACE) Crude Oil

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

MAJNOON OIL FIELD IRAQ Southern Iraq Shell SS Split Body Bolted Body 2" through 18" 150# F316/F316 soft seated. Manual operated.

SOUR (NACE) Crude Oil

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Unknown Unknown OEM CS Top entry Trunnion TOP ENTRY 12" 150 A352 LCBSUBSEA SERVICE

SOUR (NACE MR0175)

SUBSEA SERVICE CORROSIVE & DIRTY

CORROSIVDIRTY

PERTH WAVE ENERGY PROJECT, WESTERN AUSTRALIA, CETO 6

AUSTRALIA Perth Carnegie Wave Energy CS Split body Trunnion Side Entry Subesea 2"÷6" #900 LF2



DIRTY HIGH PRESS

LDPE - ETILENO XXI PROJECT MEXICO Vera Cruz Braskem Idesa Tecnimont SS Split body Trunnion Side Entry HT 2"÷4" #150 F316 (-100°/+280°C)

Fuel Gas CRYOGENIC HIGH TEMPERATURE

HIGH TEMPERAT

Eskene West Rail project KAZAKHSTAN Atyrau AGIP KCO (Kashagan) Worley Parsons CS SS ALU-BR Split body

Floating + Trunnion Side Entry HT + Fire Flexible Jacket 1"÷10" #300÷600 LF2 + F316 + B148 METAL

SEATED

(-40°/+340°C)SOUR (NACE) Fuel Gas +Prod. Water

HIGH TEMPERATURE

LOW TEMPERATURE

CORROSIVDIRTY

BOROUGE 3 PROJECT - RUWAIS UAE/POLYOLEFINS UNIT

UAE Abu DhabiADPCL (Abu

Dhabi Polymers

SS Split body Trunnion Side Entry 6"÷10" #150 F316 SOUR (NACE) Slurry

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

IMOURAREN URANIUM PROJECT NIGERIA Sahara Desert Sopamin Areva Kepco CS SS Split body Floating Side Entry 1"÷2" #150 LF2+F316 Clean non corrosive CLEAN CLEAN CLEAN

OEM Unknown Unknown OEM SS Split body Trunnion side entry split boby 28"x24" 300# -150 °C / + 100 °C CRYOGENIC CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Unknown Unknown OEM LTCS Split body Trunnion Fully Welded side entry 42" 900# -7 C° / +175C° HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Unknown Unknown OEM SS Split body Trunnion side entry 40" SS316/SS316/XM 19 -196 C° +200 C° CRYOGENIC CORROSIVE & DIRTY

CORROSIVDIRTY

OEM VENEZUELA Guárico State OEM CS SS Split body Floating / Trunnion 1"÷2"#1500 LF2 / F316(-46°/+200°C)

SOUR (NACE) CO2 + Hydrocarbon

LOW TEMPERATURE


OEM SAUDI ARABIA Yanbu Al-Sinaiyah OEM CS SS Split body Floating / Trunnion 1"÷3"#150 LF2 / F316 SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

RAS LAFFAN-TAWEELAH PROJECT QATAR Doha Dolphin Energy

Ltd - Total E&P SS INC Split body Floating / Trunnion 3/4"÷1" #800÷1500 LF2 - INC 625 - F316

(-46°/+200°C)SOUR (NACE) Hydrocarbon &

LOW TEMPERATURE


OEM UK North Sea OEM CS SS DS SDSS Split body Floating / Trunnion Side Entry 3/4"÷4" #150÷2500 F316+LF2+F51+F53

(-135°/+200°C)Methanol +N

+Fuel Gas +MEG CRYOGENIC CORROSIVE &

DIRTY HIGH PRESS

Gladstone LNG AUSTRALIA Gladstone OEM DS DBB Floating / Trunnion Side Entry DBB 3/4"÷2" #300÷2500 F51

(-46°/+170°C)Hydrocarbon, Fuel

gas, Glycol,

LOW TEMPERATURE

CORROSIVE & DIRTY

CORROSIVDIRTY

Cidade de Hilabela BRAZIL FPSO Petrobars CS SS DS ALU-BR Split body floating 1 1/2"-2"-3" #150/600 F51/B148/F316/LF2 SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Haltenbank in the Norwegian Sea NORWAY North Sea OEM CS Split body Floating Side Entry 1"#150 SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

OEM NORWAY Tampen area OEM CS SS 6MO Split body Floating Side Entry 1"÷3" #150 LF2 - F316 - F44(-101°/+200°C)

SOUR (NACE) Sea water

CRYOGENIC CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Unknown Unknown OEM CS SS INC Split body Floating Side Entry 1"÷4" #150 ÷2500 INC825 + 316 + LF2 SOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

Gladstone Power Station AUSTRALIA Gladstone OEM CS SS Split body Floating Side Entry 3/4"÷4" # 300÷1500 F316+LF2 METAL SEATED

(0°/+315°C) Amine +LNG

HIGH TEMPERATURE

CORROSIVE & DIRTY

CORROSIVDIRTY

Montrose Blp UK North SeaTalisman Sinopec

Energy (UK) SDSS DBB Floating Side Entry DBB 1"#600 F53

SOUR (NACE) Crude oil +Methanol

CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

FPSO Cidade de Hilabela BRAZIL Sapinhoás field Petrobras SBM Offshore CS SS DS ALU-BR DBB Floating Side Entry DBB 1/2"÷3" #150÷600 LF2+F316+F51+B148

(-46°/+204°C) SOUR (NACE)

LOW TEMPERATURE

CORROSIVE & DIRTY

CORROSIVDIRTY

STAATSOLIE REFINERY EXPANSION PROJ. / SURINAME

SOUTH AMERICASuriname Tout

Lui Faut - Paramaribo

Staatsolie CS Split body Floating Side Entry HT 1"#800 LF2 METAL SEATED (-7°/+270°C) SOUR (NACE)

HIGH TEMPERATURE

CORROSIVE & DIRTY

CORROSIVDIRTY

Cidade de Saquarema BRAZIL FPSO Petrobars CS SS DS ALU-BR DBB Monoflange and Modular DBB 2" #150/600 F51/B148/F316/LF2 Clean non corrosive CLEAN CLEAN CLEAN

OEM NIGERIA Sahara Desert OEM CS DS Split body Trunnion / Floating 2"÷10" #150÷900 LF2 - F51 SOUR (NACE) H2S +CO2 +Methanol HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

Litoral "A" Platform MEXICO Gulf of Mexico Pemex Dragados Off Shore Mexico CS Fully welded

Trunnion / Floating Fully Welded 3/4"÷30" #150÷1500 LF2 with Paladon fire proof jacketed

actuatorsSOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM MEXICO Gulf of Mexico OEM CS Fully welded Trunnion Fully Welded 42" ANSI 900 A105 soft seated NATURAL GAS (Light corrosive) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM Unknown Unknown OEM CS Split bodyTrunnion mounted ball valves 8"-10"x8"150 12"-14"x12"-28"x24"-24"x20" 300 24"x20"900 RIF.

SPEC TOTAL SP TCS 142-1998



DIRTYCORROSIV

DIRTY

OEM SAUDI ARABIA Yanbu Al-Sinaiyah OEM CS Split body Trunnion Side Entry 1"#600 LF2 SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

OEM IRAQ Karbala OEM CS Split body Trunnion Side Entry 1/2"÷8x6" #600 LF2+ENP SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

RONG DOI DEVELOPMENT VIETNAM Vung TauKNOC (Korea National Oil Corporation)

DS Split body Trunnion Side Entry 2"÷4" #300÷900 F51 (-46°/+170°C) SOUR (NACE)

LOW TEMPERATURE


IKA JZ Project North Adriatic Platform Field CROATIA Adriatic Sea Saipem Rana Diving CS Split body Trunnion Side Entry 2"÷4" #300÷900 LF2 Clean service free

from solid particles HIGH PRESSURE HIGH PRESSURE HIGH PRESS

OEM AFRICA Congo Pointe Noire OEM CS Split body Trunnion Side Entry 2x1.1/2"# 150÷600 LF2 SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

PETRONAS GAS- KERTEH – GPP B MALAYSIA Terengganu

KerthPetronas

Carigali Hess CS Split body Trunnion Side Entry 3x2" #600 LF2 SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Unknown Unknown OEM CS Split body Trunnion Side Entry 4"÷6" #600 LF2 (-46°/+148°C) Fuel Gas

LOW TEMPERATURE

LOW TEMPERATURE

LOW TEMPERAT

CAPTAIN EXPANSION PROJECT UK North Sea Texaco North

Sea UKKorea Captain Company Ltd CS DBB Trunnion Side Entry DB&B DPE 3x2" #300 Cryo LF2 +

F316

(-101°/+150°C)SOUR (NACE) Fuel

GasCRYOGENIC CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM AUSTRALIA Gladstone OEM CS DBB Trunnion Side Entry DBB / HT 1/2"÷2" #150 ÷600 LF2 (API 10000) SOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM MEXICO Gulf of Mexico Pemex CS Split bodyTrunnion Side Entry Split body 36", 30", 20", 12", 10",4" ANSI 150-300 A105+Inconel 625 cladding

metal seatedSOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

OEM MEXICO Gulf of Mexico Pemex SS Split body Trunnion Side Entry split body 40" #150 F316(-196°/+200°C)LNG SOUR NACE


DIRTYCORROSIV

DIRTY

OEM THE NETHERLANDS Steenoven OEM CS Fully welded Trunnion Side Entry, Fully Welded 4x3" #600 LF2 SOUR (NACE)

Crude oilCORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

OEM Unknown Unknown OEM SS Split body Trunnion Side Entry 28"x24" 300# 304/316(-150C°/+100C°)

Standard non corrosive

CRYOGENIC CRYOGENIC CRYOGEN


Statoil Petroleum


F316/F51/F55/B381

(-46°/+200°C)SOUR (NACE) Sea

water

LOW TEMPERATURE


York Project - Easington Terminal UK UK Centrica

Storage Energy CS SS DS Split body Trunnion Side Entry 2"÷ 3" #150 ÷ #900 LF2/LF2+ENP/F51/F6 soft seated/metal bare stem Clean non corrosive HIGH PRESSURE HIGH PRESSURE HIGH PRESS

SAKHALIN OIL AND GAS DEVELOPMENT RUSSIA Yuzhno-

SakhalinksSakhalin Energy CS SS DBB MODULAR DBB Floating 3/4" / 2" ANSI 300 LF2/316

PEEK Clean non corrosive CLEAN CLEAN CLEAN

Hannover project GERMANY Hannover Exxon Mobil CS SS Split body TRUNNION API 6A Clean non corrosive CLEAN CLEAN CLEAN

GARRAF FIELD Iraq Iraq Petronas Carigali Hess CS DS Split body Floating LF2/F51, soft, 2";3"x2"; 4"x3"; 4" RF Clean non corrosive CLEAN CLEAN CLEAN

GDF Suez E&P project UK North Sea GDF Suez E&P CS SS Split body SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

PMP - Plateau Maintenance Project QATAR Qatar QatarGas CS SS Split body Floating side entry LF2/F3161"1/2 and 1/2" #300

Trunnion LF2/L316, Peek 3"x2" #300 RF Clean non corrosive CLEAN CLEAN CLEAN


Statoil Petroleum


F316/F51/F55/B381

(-46°/+200°C)SOUR (NACE) Sea

water

LOW TEMPERATURE


Jasmine project UK North Sea Conoco Phillips Worley Parsons SS DS SDSS INC Split body Floating Side Entry 1"÷6"#150-600 F316/F51/F55/INC 625

(-120°/+225°C) SOUR (NACE) CRYOGENIC HIGH

TEMPERATURECORROSIV

DIRTY

MVC/PVC Plant Marechal Refinery BRAZIL Brazil Braskem CS MONEL Split body

Floating LF3/MONEL K500, PEEK, PTFE O-RING, SOFT: 3/4" AND 1" #800 SW 2"- 3" -4" #300 RF / Trunnion LF3/MONEL K500, Peek, soft 6" #300 RF

SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

Hole House Phase Three Project Unknown Unknown AMEC

FosterWheeler EDF Energy SS DBBmodular DB&B trunnion 2"x1"1/2 #600 & #300F316/F316 c/w stem extensin for insulation, soft

LEVERSOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

PETROBRAS CISADE VITORIA FPSO PROJECT BRAZIL BRAZIL Petrobras Saipem SS DS Split Body

Trunnion 8"X6" 2500# RTJ (F316/F51/17-4PH STEM PEEK, SOFT, GEAR; Top entry Trunnion DPE

F316/F51, PEEK GR.660 Boting soft 8" and 3" RTJ SOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

Rominserv Storage Tanks Farm Tanks revamping Project

ROMANIA Romania Rominserv SA CS DS Split Body Trunnion ball valve 4" #300 RF LF2/F316/F51 stem ,Devlon soft, Bare stem SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

RATCLIFFE SCR RETROFIT - POWER PLANT UK UK Doosan

Babcock Energy SS Split body Trunnion ball valve 3" 4" #300 BW F316/F316, EPDM orings , soft , LEVER ammonia CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

Fixed Platform Zhdanov-A TURKMENISTAN Turkmenistan Dragon Oil CS SS Split body Trunnion 3"; 8" #600 RF lf/f316, Devlon, soft, bare stem SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

Greater Ekofisk Area NORTH SEA NORTH SEA Conoco Phillips Total E&P Norge

Statoil Petroleum

A.S.DS DBB

FLOATING 2"X1"1/2 #300 rf f51/f 51 LIP SEALS SOFT LEVER 4"X3" #300 RF F51/F51 lip seal 3" #300 RF

F51/F51 Lipseal Lever modualr DB&B 1"x1"1/2 #300 -


FPSO KUITO AFRICA Angola Chevron SBM Offshore CS SS Split body Trunnion 8" #150 RF (LF2/F316 soft Bare stem SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

In Salah Gas AFRICA Algeria Aibel CS SS DS Split bodyFloating 1" #150 Rf (Lf2/F316 soft) Lever; 1" #150RF (f51/f51 soft) Lever ; 2"x1"1/2 RF (f51/f51 soft

)LeverSOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

North Cormorant, Cormorant Alpha, Tern Alpha North Sea East

UK North Sea Taqa CS SS Split body Trunnion 10"x8" 600# RF (LF2/F316 soft) Gear; Trunnion 6" 1500# (LF2/LF2ENP soft) Gear SOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

CKR Metering MALAYSIA Kuala Lumpur Petronas Carigali Hess CS DS Split body 16"x12" 1500# RTJ (lf2/F51 soft ) bare stem Clean non corrosive HIGH PRESSURE HIGH PRESSURE HIGH PRESS

Porto Refinery Conversion Project PORTUGAL Portugal Fluor Galp Energia CS SS Split body

Floating 2"x 1"1/2 150# RF (LF2/F316 soft Lever 2" 150# RF Lf2/F316soft lever 3/4" 800#(LF2/F316 soft Lever 1"#800 SWLf2/F316soft lever 1/2 " 150 #RF


CORROSIVE & DIRTY

CORROSIVDIRTY

Kinabalu Nag Development- Fuel gas Skid SINGAPORE Singapore Petronas Gas SS Split body Trunnion 2"x1"1/2 #600 RF (F316/ F316 oft ) Bare

stem SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

SHELL F28DR-A Fuel Gas System MALAYSIA Offshore Sarawak Petronas

Carigali Hess Sarawak Shell DS Split Body Trunnion Side Entry 2" 300# F51/F51 Soft seated; 2" 900# F51/F51 Soft seated; actuated Clean non corrosive HIGH PRESSURE HIGH PRESSURE HIGH PRESS

Kuantan Compresson Station-Fuel Gas System SINGAPORE Singapore Petronas Gas CS SS Split body 2" #600 RF Lf2/F316 soft Bare stem Clean non corrosive CLEAN CLEAN CLEAN

Aurora project UK North Sea Wood Group BP E&P CS SS DS Split bodyfloating and trunion fro 1 to 10" classes 150# to

1500# materials: lf2/f316 and f51/f51 soft F316/F31\6 LIP SEAL


KUMANG CLUSTER PROJECT MALAYSIA Offshore Sarawak Petronas Carigali Hess Sarawak Shell CS SS Split Body

2"X1.5" #300 Rf (LF2 Enp /F316 soft ) bare stem 2" #300 RF (LF2 ENP/F316 soft) Bare stem 6"x4" #300

RF (lf2/f316 sof ) barestemClean non corrosive CLEAN CLEAN CLEAN

OEM VIETNAM Vietnam OEM CS SS DS Split body 2"x1.5" #600/#900#1500 LF2/F6A/F51 SOFT bare stem ; 6"#900 10" #600 LF2 ENP/F6A bare stem SOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

West Dikirnis / Petrojet AFRICA Egypt Petrojet CS DS DBBModular DB&B Floating & trunnion 2" to 4" #150 RF

LF2/LF2 Enp soft and #300 3"to4" #900 RTJ LF2/F51 soft / floating and trunnion side entry 3" and 4" RF


CORROSIVE & DIRTY

CORROSIVDIRTY

GI fuel gas Project Unknown Unknown Petrojet CS DBB DB&B trunnion 8" #900 RTJ (LF2/LF2 SOFT) GEAR SOUR (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

GI fuel gas Project Unknown Unknown Petrojet CS DS DBBDB&B TRUNNION 2" #900 RTJ LF2/F51 SOFT LEVER 2" #1500 RTJ LF2/F51 SOFT LEVER 4" 1500# RTJ

LF2/F51 SOFT GEARSOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM ITALY ItalyCostruzione

Impianti Industriali

CS Fully welded Trunnion 3" 600# RF LF2/LF2 ENP Lever / fully welded 8" and 3" 600# RF Actuated/ Lever SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

OEM NORWAY Norway Conoco Phillips Total E&P Norge

Statoil Petroleum

A.S.CS Split body Trunnion 4" 2500# HUB (LF2+inc 625 WO /F51 + TCC

+ Lip seal) SOUR (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

OEM ITALY Italy AGIP Gela CS SS Split body Trunnion 20" 150# RF A105/F316 Gear SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

OLOWI OFF-SHORE FIELD PROJECT AFRICA Gabon ENI SAIPEM CS SS DBB Floating 2"x1.5" A105/F316 Trunnion 4"x3" 900#

A105/F316 Lever SOUR (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

MAAMOURA Project AFRICA Tunisia ENI SAIPEM DS DBB 3/4" 1500# RTJX NPT-F F511/F51 Lever Clean non corrosive HIGH PRESSURE HIGH PRESSURE HIGH PRESS

OEM POLAND Poland Polish Oil & Gas CS Split body Floating 1/4" to 3" 800# and 600# lever Clean non corrosive CLEAN CLEAN CLEAN

ENI Plant ITALY Italy ENI SAIPEM CS SS Split body Three Way Valve 2" to 4" #150 and 300# LF2/F316 Lever Clean non corrosive CLEAN CLEAN CLEAN

OEM INDIA India ONGC India DS Split body Trunnion 16"x14" #150 F51/F51 Gear SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

ENI Plant ITALY Italy Soeco Engineering CS SS Top entry

10" and 10"x 8" 900# RTJ Ger / trunnion 3"x2" 900#LF2/LF2 ; 4"x3" 900# LF2/F316 6"X4" 900#LF2/F316 2"X1.5" 1500# RTJ Gear 2"1500# RTJ LF2/F316 lever

SOUR (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

OEM AFRICA Tunisia Steg CS SS Split body8" 300#RF 8" 150#RF 8"x6"150#RF 6"x4" 600# RF 6"x4" 300#RF 4"X3" 600# RTJ4"X3" 600# RTJ 4"X3"

300# RF 3" 600# RTJ 3" 150 RF3"X2" 600# RTJ SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY


Statoil Petroleum

A.S.CS DS Split body

Trunnion: 1-off 8” 300# RF (LF2 + 625 o’lay body / F51 + TCC trim) c/w Biffi Pneumatic spring return

actuator Gas test (high pressure body, seat and DB&B)SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

OEM ABU DHABI ABU DHABI Gasco SS Split bodyTrunnion: 31-off 2” 600# RF c/w Lever (Full 316)2”

600# RF c/w Lever (LF2 / 316 4” 600# RF c/w Lever (Full 316) 4” 600# RF c/w Lever (LF2 / 316) 6” 600#


CORROSIVE & DIRTY

CORROSIVDIRTY

BPB Revamping Project INDIA India ONGC India DS Split body Trunnion 2" 1500# RTJ F51/F51/F316L Floating 1/2" to 2" class 300# 600# 800# F316L / F316L SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

Greenstream Project LIBIA Libia Saipem CS Split body Trunnion 16"x12" 1500# RTJ (LF2/ LF2 ENP) SOUR (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Unknown Unknown OEM CS SS Split body LF2/F316Trunnion 12" 150# RF (lf2/f316 soft) manual 12" 600# RTJ SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

OEM AFRICA Tunisia ENI SAIPEM CS SS Split bodyTrunnion 8" 600# RJ Lf2 F316 soft 8" 150# LF2/Lf2enp soft 6" 150# LF2/F316 soft4" 150# Rf LF2/LF2

enpSOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

GIMBOA FPSO FPSO FPSO Petrobras SAIPEM CS DS Split body Trunnion 3" 2500# RF LF2/F51 soft SOUR (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

GIMBOA FPSO FPSO FPSO Petrobras SAIPEM SS DS Split body Trunnion 8"x6" 150# Rf F51/F51 10"x 8" 150 RF# f51/f51 soft 10" 8" RTJ F316/f316 soft Gear SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

OEM AFRICA Tunisia ENI - Saipem SAIPEM CS Split body18” RB 150# 14” RB 150# 12” RB 600# RJ 12” RB 300# 12” RB 150# 10” RB 600# 6” RB 1500# RJ 6”

RB 1500# 6” RB 300# 4” RB 600# RJSOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM INDIA India ONGC India CS SS Split bodyTrunnion: 3-off 16” 900# RTJ (LF2 / F316 soft

seated) 12” 900# RTJ (LF2 / F316 soft seated) 10” 900# RTJ (LF2 / F316 soft seated8” 900# RTJ (LF2 /


CORROSIVDIRTY

OEM AFRICA EGYPT Snam Progetti Khalda Petroleum DS Split body

Trunnion: 6-off 4” 900# RTJ c/w Gear (F51 / F51 soft seated) Floating: 88-off 1/2” to 2” 150# 800# 1500#

manual (various materials)SOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM NORWAY Norway Norsk Hydro AS CS DS Split body Trunnion: 1-off 2” 2500# RTJ c/w Gear (LF2 / F51 soft seated) SOUR (NACE) HIGH PRESSURE CORROSIVE &

DIRTYCORROSIV

DIRTY

OEM INDIA India Reliance India CS SS Split body Trunnion 2" 600# RF A105/F316 soft seated Lever op. SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

OEM Unknown Unknown OEM CS SS Split bodyFloating: 3-off 4” 150# RF (A105 / F304 + Chromium Carbide Coating for High Temp service up to 400 Deg.

C) 1-off 4” 300# RF (A105 / F304 + Chromium

(-7°/+400°C) SOUR (NACE)

HIGH TEMPERATURE

CORROSIVE & DIRTY

CORROSIVDIRTY


Statoil Petroleum

A.S.CS SS Split body Trunnion: 1-off 12” 1500# Hub ends bare stem (LF2 /

316) SOUR (NACE) HIGH PRESSURE CORROSIVE & DIRTY

CORROSIVDIRTY

SP2(Biskra)&SP3(M’Sila) Pumping Stations for Ob1 Haoud El

AFRICA ALGERIA Sonatrach CS Split body24” 900# RTJ PEEK seals c/w Electric actuator 20” 900# RTJ PEEK seals c/w Electric actuator 12” 900# RTJ PEEK seals c/w Electric actuator 10” 900# RTJ


CORROSIVDIRTY

Petrobras Cidade Vioria Fpso FPSO FPSO Petrobras SAIPEM CS DBB20” 300# 18” 150# 14” 150# 12” 300# 12” 150# 10”

2500# 10” 900# 10” 150# 8” 150# 6” 2500# 3” 2500# 2” 1500# 2” 900# 1” 2500# DB&B Modular


CORROSIVDIRTY

Impianto di teleriscaldamento sede Age Piancastagnio - Larderello

ITALY Italy Enel CS Fully welded Fully Welded Ball Valve Trunnion: 4-off 6” 600# BW c/w 2100mm stem extension Gear operated. SOUR (NACE) CORROSIVE &

DIRTYCORROSIVE &

DIRTYCORROSIV

DIRTY

ONSHORE MELLITAH UPGRADING ELEPHANT PRJECT

LIBIA Libia AGIP Oil Libia CS Split Body Trunnion 26” & 32” ANSI 150 SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

IGCC Sarroch Italy ITALY Italy SARAS CS Split body Floating & Trunnion 3/4” up to 8” class 150 up to 600 Clean non corrosive CLEAN CLEAN CLEAN

RAG & Flare Mitigation Integrate project QATAR QATAR

Petrofac International

Ltd

Qatar Petroleum CS Split Body

Floating Ball 1/2” up to 1.1/2” Class 150 up to 1500Trunnion 10” ansi 300 Clean non corrosive HIGH PRESSURE HIGH PRESSURE HIGH PRESS

Raffineria di Gela ITALY Italy Saipem CS SS Split Body Trunnion & Floating 2”, 4”, 8”, 10”, 12” ANSI 150 A105/F316 Soft seated Clean non corrosive CLEAN CLEAN CLEAN

OEM ITALY Italy ENIPraoil

Oleodotti Italiani

CS Fully welded Trunnion 3” – 8” – 10” WE SOUR (NACE) CORROSIVE & DIRTY

CORROSIVE & DIRTY

CORROSIVDIRTY

OEM ITALY Italy Petrolig srl CS Split Body Trunnion 18” – 14” – 8” – 6” – 4” – 2” Clean non corrosive CLEAN CLEAN CLEAN

Raffineria di Gela ITALY Italy Saipem CS Split Body Trunnion 12” – 10” – 8” – 6 Floating 3/4” – 2” Clean non corrosive CLEAN CLEAN CLEAN

IGCC PROJECT ITALY Italy Snam Progetti CS Split Body Trunnion 1” – 4” Metal Seated HT 300°C (-7°/+300C) SOUR (NACE)

HIGH TEMPERATURE

CORROSIVE & DIRTY

CORROSIVDIRTY

خارجی شرکت هایو گستر نیک شرکتمستندات همکاری

(Neak Valve)

گستر نیک گروه توسعه شیرآالت صنعتی

(Neak Valve)

آدرس پستی: تهران. آزادراه خلیج فارس. شهرک صنعتی شمس آباد. بلوار

.249نگارستان. خیابان آبان. خیابان آبان یکم. پالک

1834136681کدپستی:

www.neakvalve.com

[email protected]

Address: No 249, First Aban St, Aban Ave,

Negarestan Blvd,Persian Gulf Freeway ,Tehran,Iran

Postal Code: 1834136681

(Neak Valve)

Neak Gostar Industrial Valves Development Group

Update: 2018

mailto:[email protected]