JMatPro

()

JMatPro

�

�

1 Rene 77

-

JMatPro

� Fraction solid ( )� Specific heat ( )� Enthalpy ( )� Laten heat ( )� Density ( )� Thermal expansion coefficient ( )� Volume change ( )� Thermal conductivity ( )� Electrical conductivity/Resistivity ( / )� Liquid viscosity/diffusivity ( )� Poisson's ratio ( )� Young's/Bulk/Shear moduli ( / / )

JMatPro

2 Rene 77

JMatPro

� 0.2% offset� 0.2% offset

� -�

3 Rene 77880MPa( 760�C)

J M a t P r o ECSC

Elite Crown Software & Consulting Co., Ltd. Tel: 02-8972-9067 www.elitecrown.com.tw

-

� TTT curves ( )� CCT curves ( )

� Gamma'/Gamma" coarsening in Ni alloys ( �’ �” ) � Martensite transition ( )

4,5 AISI 4140 TTT CCT

JMatPro

National Energy Technology

Laboratory R.

Mohn

“This purchase order is being issued to Sente Software Inc because there is no alternative since they are the manufacturer of JMatPro and, as such, is the only source of this software. No other vendor can supply this software. This software is the only reliable, commercially available software available to make calculations for stable and metastable phase equibria; solidification behavior and properties; thermo-physical and physical properties; phase transformations; chemical properties; and mechanical properties for number of nickel-based and iron-based superalloys…”

JMatPro

JMatProWindows98

/2000/NT/XP Linux

� JMatPro for Zr-alloys � JMatPro for Al-alloys � JMatPro for General Steels � JMatPro for Stainless Steels � JMatPro for Ti-alloys � JMatPro for Mg-alloys � JMatPro for Cast irons � JMatPro for Fe-alloys � JMatPro for Ni-based Superalloys � JMatPro for Solder Alloy

(ECSC)241 122 2Tel: 02-8972-9067 Fax: 02-2978-2023 www.elitecrown.com.tw

Elite Crown Software & Consulting Co., Ltd. 2F, 122, Chung Hsin Rd., SEC. 3, San Chung City, Taipei County, Taiwan, R.O.C. Tel: 886-2-8972-9067 Fax: 886-2-2978-2023

JMatPro

JMatPro