kmd-410m j kmd-410mj
TRANSCRIPT
MODULAR CRESCENT CUBER
KMD-410M_J06/05/19
Item # 13547
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.
• Up to 449 lbs. of ice production per 24 hours
• Durable stainless steel exterior
• EverCheckTM alert system
• Removable air filters (air-cooled model only)
• Designed specifically for use on ice and beverage dispener (pictured with a Lancer 22” model)
• R-404A Refrigerant
TM
• Ambient Temp Range 45 - 100°F• Water Temp Range 45 - 90°F• Water Pressure 10 - 113 PSIG• Voltage Range 104-127V
Operating Limits• Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or EquivalentWater-Cooled Model (Lines Must Be Independent of Icemaker)• Condenser Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent• Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard Pipe (open drain system) or Copper Water Tubing (closed loop system) or Equivalent
Plumbing
Service
221/4" x 241/8" x 24"W x D x H
Hoshizaki reserves the right to change specifications without notice.
Air-CooledShown on optional
Lancer 22” dispenser
KMD-410MAJ
Also available on Bins:B-250PFBD-300PF/SFTop kit is required. See Bin Spec Sheets.
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator. 5 Year Parts on Compressor; air-cooled condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factoryfor warranty in other countries.
Warranty:
Water-CooledKMD-410MWJ
B-500PF/SFB-700PF/SF
DB-130H
• Panels easily removed and all components accessible for service.• For proper air circulation and ease of maintenance/service, allow 6” (15 cm) clearance at rear, left side, and top and 12” (30 cm) clearance at right side for both air-cooled and water-cooled models.
418
449
KMD-410MAJ
KMD-410MWJ
Air 351
436
23.7
22.9
N/A
108
5.7
4.1
20A
20AWater
5,500
6,300
126 / 161
128 / 163
115V/60/1
115V/60/1
Air / Water TempLbs. per 24 hoursCondenser Model
70°/ 50°F 90°/ 70°F
ICE PRODUCTIONPotable
Gal. per 100 lbs.Condenser
Gal. per 100 lbs.Max. Fuse Sz
or HACRCircuit Bkr
HeatRejectionBTU/hr.
Voltage
WATER USAGE
90°/ 70°F 90°/ 70°F
ELECTRICAL
90°/ 70°F
kWh Used per 100 lbs. Amperage
8.2A
6.6A
CircuitWires
(including ground)
3
3
Net / ShipWeight (lbs.)
Refrigerant Charge Amount
1 lb. 0.9 oz.
14.1 oz.
KMD-410M_J
Features Individual crescent cube
Stainless steel evaporator
CycleSaverTM design TM
Volume:333/4” x 331/4” X 275/8” 17.94ft3Shipping: (LxWxH)
Power cord not included
* approximate size in inches, image not to scale
KM Edge Cube Dimensions*
11/2”1/2”
11/8”
Please refer to water filter spec sheet for recommended configurations.Water Filter
B-800PF/SFB-900PF/SF
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.
WATER-COOLED
BOTT
OM V
IEW
WATER-COOLED
BACK
VIE
WSI
DE V
IEW
FRON
T VI
EW
WATER-COOLED
AIR-COOLED
AIR-COOLED
AIR-COOLED
Front Front
WATER-COOLEDAIR-COOLED
Front Front
MODULAR CRESCENT CUBER
KMD-410M_J06/05/19
Item # 13547KMD-410M_J