mcs co.,ltd
TRANSCRIPT
http://www.mcschem.co.kr
MCSCORPORATION
Micro Chemical System
Ms
c
02
산업사회가 다양화, 고도화됨에 따라서 접착력이 더욱 강하고 내후성이 강하며 세트 타임은 더 빠르면서도
더욱 많은 종류의 피착제에 적용할 수 있는 접착제의 개발이 요구되고 있습니다. 한편 환경보존의 요구는
더욱 더 점증하여 공해를 유발하지 않고 재활용이 가능한 접착제의 개발 또한 필수적으로 요구되고
있습니다. 이러한 시대, 사회적 흐름에 발맞추어 당사에서는 이런 다양한 요구에 부응하기 위하여
요구용도와 적성에 맞는 특수한 수지를 합성 또는 중합하고 있으며 R&D에 대한 투자를 통해 보다 완성도
높은 제품을 만들기 위하여 끊임없는 노력을 경주하고 있습니다.
핫멜트는 물이나 용제를 전혀 사용하지 않고 100% 열가소성수지(thermoplas-
tic-resin)를 사용하여 고온에서 액상으로 피착제에 도포, 압착후 수초 내에 냉각
고화되면서 접착력을 발휘하는 열용융 접착제로서 당사에서는 핫멜트 중에서도 이
분야 기술의 최첨단이라고 할 수 있는 자동차 램프 조립용 제품은 국내에서는 물론
해외 시장에서도 고도화되고 정밀한 제품으로 검증되고 평가받고 있습니다.
보다 편리하고 효율적인 접착이 이루어질 수 있는 제품 개발을 위해 경주하고 있으며 저희들의 이러한
노력에는 고객님들의 요구와 지도는 필수적 요소입니다. 당사의 홈페이지에 방문하시어 기존 제품의
애용과 개선, 신제품의 개발에 대한 많은 의견을 제공하여 주시기 바랍니다. 고객의 어떠한 요구도
만족시키는 최상의 품질은 (주)엠씨에스의 기술이 드리는 변함없는 약속입니다.
저희 (주)엠씨에스는 한국 최대의 산업용 접착제 전문회사로서 1998년(종전의 ‘양지’사를 인수) 회사
설립이후 오늘에 이르기까지 품질이 바로 고객과의 약속이라는 원칙하에 축적된 기술과 철저한 서비스,
최상의 품질로 그 약속을 지켜 나가기 위해 노력하고 있습니다.
회사소개 Company Introduction
03
Industry requires a very forgiving adhesives, maintaining higher bonding strength, better weath-
ering, faster set time and applicable to more and many substrate.
On top of this, environmental conservation including energy saving is also strongly required to the
property of adhesives.
Meeting these industrial and the timely requirement is more than important for us and synthesis
or polymerization to have a certain property is our daily job. Ever increasing investment for R&D
freshes our capability to better products.
Hot Melt Adhesives are, with no solvent at all, using 100% thermoplastic
resin, applied to the substrate at high temperature, then pressed to complete
bonding, which sets in a second. It is very much special that our HMA is highly
appreciated by car industry as they are happy with our consistent quality of
head and rear lamp adhesives, as they are maintaining flexible bonding
strength for years after years through very hot and very cold weather.
We are trying to develop new product for more convenient and efficient adhesive so that we need
your support and requirement for our effort. Hereby we promise to satisfy your needs and require-
ment by our technology and everlasting effort for betterment.
We at MCS, as one of the biggest Industrial Adhesives Formulator since 1998 under and with the
underlying principle quality is real base of our customer's trust total history over a decade includ-
ing Yangji's High Molecular Division(Our old affilliate), We are trying our best to lead and meet
customer's request with best quality and products.
CORPORATIONMicro Chemical System MCS
핫멜트 접착제(열용융형 접착제)는, 고체상태의 열가소성수지로서 가열 후 용융상태로 도포되어 냉각과
동시에 고체화되면서 접착력을 발휘합니다. 핫멜트는 순간적으로 접착을 완료시킴으로서 자동화 라인에
주로 사용되어 제품의 품질과 생산성향상에 기여해 왔습니다. 당사의 고유브랜드 써니멜트(SUNIMELT)는
그 동안의 시장경험과 축척된 기술을 바탕으로 고품질의 제품과 고객만족 서비스를 제공하고 있습니다.
Hot melt adhesive(HMA) is solid thermoplastic and is applied in liquid phase after being heated to the required level as abated in specification. HMA contributes to the better and faster automation as adhesion is completed within a few seconds, thus increasing productivity and quality. MCS corporation has experience over a decade in bindery series of SUNIMELT and enjoys high market reputation. Good quality and impressive service has established murmuring stream of satisfaction and emotion, even in the chilly market environment.
핫멜트 접착제 (Hot melt adhesive)
04
제품 소개 products
Application ● SUNIMELTⓇ for Bookbinding
● SUNIMELTⓇ for Stick
● SUNIMELTⓇ for Packaging
● SUNIMELTⓇ for Assembly
● SUNIMELTⓇ for Automotive
● SUNIMELTⓇ for HMPSA
05
CORPORATIONMicro Chemical System MCS
제본하는 용도 및 종이의 재질에 따라 1차 제본용, 일반제본용, 아트지용, 사이드용, 고급양장제본 등으로
구분합니다. The bookbinding hotmelt adhesives are classified for the first shot binding, for the general binding, for the art paper, for the side binding and for the high quality-hard cover bookbinding according to use for bookbinding and a paper type.
SUNIMELTⓇ for Bookbinding
Bookbinding
조립 및 포장에 쓰이는 스틱형 핫멜트 접착제입니다. Hot melt stick is used for assembly of produced products.
SUNIMELTⓇ for Hot melt stick
Hot melt stick
GRADETYPICAL PROPERTIES
COLOR APPEARANCE APPLICATION
SB-100KS White pigmented Slat 일반제본용(2nd shot)General Bookbinding
SB-100S White pigmented Slat 제본용(고화속도 빠른 제품)Bookbinding(Quick setting time)
SB-105K White pigmented Slat 일반제본용(유연성이 우수한 제품)General Bookbinding(Better flexibility)
SB-108 White pigmented Slat 일반제본용(색상이 우수한 제품)General Binding(Good color)
SB-185(A) White Transparent Pellet 사이드 제본용Side glue
SB-170 White pigmented Slat 전처리용(1st shot)Hot Melt for Pre-treatment
SB-250G White pigmented Slat 아트지 제본용Art paper, Snow white paper
GRADETYPICAL PROPERTIES
COLOR APPEARANCE APPLICATION
SB-922 White Stick 일반 스틱바(백색)general purpose
SB-923H White Stick 내열 스틱바excellent high heat resistance
SB-924B Black Stick 일반 스틱바(검정색)general purpose
06
제품 소개 products
생산속도가 고속화되고 포장재 재질이 다양해지고 있는 상황에서 당사에서는 각각의 포장재의 재질, 작업속도, 제품 포장 시 온도, 제품의 운반 및 보관 상태에 적합한 제품을 생산하고 있으며 특히 탄화현상을 최소화하고 낮은 사용온도와 동시에 높은 내열성을 만족하는 각종 접착제를 생산하고 있습니다. The circumstances of production efficiency very high and variety packaging type, we can provide various packaging hotmelt adhesives to be suited packaging types, working speed and charge condi-tions. Especially, we can produce various products to satisfy minimizing carbonization and maximizing heat resistance at the same time.
SUNIMELTⓇ for Packaging
GRADETYPICAL PROPERTIES
COLOR APPEARANCE APPLICATION
SB-011 / SB-421 White Transparent Pellet 무취, 무탄화, 무연사 포장용 No odor, No carbonization
SB-1999 White Transparent Block PE, OPP 라미네이션 필름용 for PE , OPP laminated paper
SB-2900 Light-yellow Pellet 일반포장용-고화속도 빠름 General packaging(fast setting time)
SB-299 Light-yellow Pellet 중저온 포장용-작업온도 낮음 for lower working temperature
SB-319 yellow Pellet 필름 라미네이션 포장재 접착용 for film-laminated packaging
SB-325 Light-yellow Pellet 껌 외포장용 for Chewing Gum Packaging
SB-330 yellow Pellet 난피착제(코팅지)접착용 Packaging(Laminated paper bonding)
SB-370 Light-yellow Pellet 일반 범용 포장용 for Corrugated box Packaging(Out & inner carton)
SB-370K Light-yellow Pellet 코팅포장재 접착용 for Over coated paper
SB-377D(K) Light-yellow Pellet 일반 내열포장용 good High heat resistance
SB-377Y Light-yellow Pellet 고내열성 포장용 poly amid
SB-383 Light-yellow Pellet 고속건 접착용for fast-setting time
SB-3900 Light-yellow Pellet 수성 코팅 접착용 for water based laminating application
SB-390A Light-yellow Pellet 각종 오버코팅 접착용 for over coating application
SB-391(H) Light-yellow Pellet 제지방습포장용 for paper moisture-proofing application
SB-399 Light-yellow Pellet 내열성포장용(고속작업용) Heat-resistance & high speed application
SB-400K yellow Pellet 일반포장용, Out box용for corrugated out box application
SB-4120 White Transparent Pellet 일반 범용 백색 포장용, Out box용 for corrugated out box application (White color)
SB-510 Light-yellow Pellet open-time 긴 포장용 for long open-time application
Packaging
07
CORPORATIONMicro Chemical System MCS
다양한 피착제가 개발, 사용되고 이에 따라 고객의 요구에 부응하기 위한 핫멜트 접착제의 역할도 강조되고 있습니다. 생산과정 중 조립에 사용되는 접착제로서 친환경적이며 가장 다양한 용도로 사용되며 유연성 및 작업성 접착강도 등의 다양한 요구조건에 적합한 접착제를 생산 공급하고 있습니다. Today, various objectives would be developed. Also role of hotmelt adhesives on the assembly to satis-fy on various client's request is emphasized gradually. And, MCS always considers environment-friend-ly before manufacturing products. Therefore, we produce to fit on client's various request for the prod-ucts which does more flexible and more adhesive strength.
SUNIMELTⓇ for Assembly
Assembly
GRADETYPICAL PROPERTIES
COLOR APPEARANCE APPLICATION
SB-1770 WhiteTransparent Block 일반 PP케이스 접착용
Adhesive for PP Case
SB-182 WhiteTransparent Pellet 각종플라스틱류 접착(스틱바 대용)
Adhesive for various Plastic
SB-184 White Pellet PP, PET 접착용Adhesive for PP, PET
SB-1947 White Block 필름 포장재 접착용for film application
SB-1997 White Block PP, PET 접착용 for PP, PET
SB-1999A White Block각종 난피착제 접착용(내한성우수) used in a variety of difficult to stick(good for cold resistance)
SB-1999M White Block 전기매트리스 접착용 for electronic blanket
SB-1999H White Block 코팅된 제지용 used in a coated paper
SB-220,212 Light-yellow Slat 열테이프용
for heat tape
SB-2903 White Pellet 지대 히트실링용 used in a bag sealing
SB-312,315
Whitepigmented Slat 침대 및 카펫 라벨 접착
Bed and carpet adhesive labels
SB-345 White Block 미끄럼방지제non slip agent
SB-4011 White Block 필터 여지 합지용for filter media
SB-430(433)Series
White Pellet공기청정기, 산업용 공조기 필터 접착용 for filter media of air cleaner or industrial air conditioner
GRADETYPICAL PROPERTIES
COLOR APPEARANCE APPLICATION
SB-432H WhiteTransparent
Block/ Pellet
고내열성 필터용 for filter(good for high heat resistance)
SB-433MB WhiteTransparent
Block/ Pellet
자동차 캐빈필터 조립용 automotive cabin filter
SB-435D WhiteTransparent Pellet 속건성 필터용
for filter(fast setting time)
SB-436S WhiteTransparent Pellet 미니 플리팅용
fix the filter media
SB-4633 WhiteTransparent Pellet 스트로 접착용(고속생산용)
for straw(high production speed)
SB-522B yellow Pellet 목공용 for woodworking
SB-555 yellow Block열수축관 내부 코팅용 Heat shrinkable tube with internal coating
SB-560N(S) White Block 자동차 내장재 조립용
for automotive interior
SB-580 White Block 틈새 실링용/부직포 합지용 sealing gaps / non-woven paper
SB-780A yellow Block 소음, 진동 방지용to avoid the noise and vibration
SB-816P White Transparent Pellet 종이라벨 접착용
used in a paper label
SB-825A yellow Block 난피착제용 for difficult application
SB-834S White Pellet 자동차 배터리용 for Automotive Batteries
SB-932 Light-yellow Block 신발용 점착제
for shoes
08
제품 소개 products
자동차의 전조등 및 후미등의 조립에 사용되며 바닥재, 배터리, 문짝, 천정재 등 각 부분에 적용되고 있으며
우수한 접착력, 접착 유지력, 내열성 및 내후성의 물성을 동시에 만족하는 특징을 가진 제품입니다. MCS also produce a automotive hotmelt adhesives to applied batteries, doors, head linings and variable auto-lamps.These products are qualified rules of automobile manufacturers as satisfied superior adhesion and heat-resisting property at the same time.
SUNIMELTⓇ for Automotive
Automotive
GRADETYPICAL PROPERTIES
COLOR APPEARANCE APPLICATION
SB-602G(B) Gray / Black Block 자동차 램프 접착용automotive lamp adhesive, black/gray color
SB-608G(B) Gray / Black Block 자동차 헤드용 중점도용 automotive head lamp(mid-viscosity)
SB-620S(Y) White Block 자동차 내장재 접착용(고점도용) automotive interior adhesive(high viscosity)
SB-620L White Pellet 자동차 felt 접착용automotive felt adhesive
SB-622 series White Block 자동차 felt 접착용-작업성이 우수한 제품 automotive felt adhesive
SB-6237(B) Yellow Pellet / Block 자동차 내장재 접착용 automotive interior adhesive
SB-632 White Block 자동차 내장재 접착용(백색)automotive interior adhesive
SB-633T White Block 자동차 내장재 접착용(백색)automotive interior adhesive
SB-6600G(B) Gray / Black Block 자동차 전방램프접착용 automotive head lamp adhesive
SB-663G(B) Gray / Black Block 자동차 전방(head) 램프접착용(PP+PC & Glass)automotive head lamp adhesive(PP+PC & Glass)
SB-6708(W) White Block 자동차 헤드라이너(headliner)용 automotive headliner adhesive
09
CORPORATIONMicro Chemical System MCS
핫멜트형 점착제로서 라벨 및 벨크로테이프 위생용(Adhesive for Hygiene)의 용도도 사용되며 FDA승인 원료로
만들어져 매우 안정적이며 작업성 및 내열안정성이 우수한 제품입니다. HMPSA make up more viscosity substances than other hotmelt adhesives used to attach labels, velcro tapes, hygiene supplies. It is possible to produce be great in heat-resisting property and workability because of we use materials to approved FDA.
SUNIMELTⓇ for HMPSA
HMPSA
GRADETYPICAL PROPERTIES
COLOR APPEARANCE APPLICATION
SB-801M Transparent Liquid 해충잡이용 used to kill insects
SB-8027 Yellow Block 각종필름 접착용 for various film application
SB-8030 Transparent Block 일반범용 라벨용(작업속도 빠름) ffor general labeling purpose(high speed)
SB-8075 Transparent Block 사각캔 라벨용 for steel can label
SB-8080 Transparent Block 고내열성 라벨용(품온 높은제품적용) for label(good for high heat resistance)
SB-817B Transparent Block PE Bag 접착용 for PE Bag
SB-821 Transparent Block 벨크로 테이프용 used in a velcro tape
SB-829B(D,S) Transparent Block 부직포 및 각종 피착제 접착용 used in a non woven fabric
SB-829M Transparent Block 의료용 for medical
SB-8505 Transparent Block 위생재용 for sanitary napkins
SB-8507 Transparent Block 기저귀용 for diaper
SB-875 Transparent Block 리무벌타입 라벨용 for repositional label
SB-890 Transparent Block 냉장보관제품 라벨용 used to keep refrigerated product label
SB-890H Transparent Block 내열성라벨용 for heat resistance label
10
회사 연혁 Company History
1998년
1999년
2000년
2001년
2002년
2004년
2006년
2007년
2011년
2012년
07월 29일
09월 14일
10월 29일
03월 23일
08월 25일
11월 09일
12월 15일
02월 29일
04월 07일
04월 10일
04월 20일
07월 20일
12월 29일
08월 08일
04월 30일
09월 05일
10월 14일
04월 30일
09월 20일
03월 26일
05월 10일
06월 18일
04월 05일
06월 11일
(주)양지고분자 설립 설립자본금:1억원
기업부설연구소 인정-한국산업기술진흥협회
1차 8억원 유상증자 (자본금총액 : 9억원)
2차 362,750천원 유상증자 (자본금총액 : 1,262,750천원)
특허 제99-35092호 등록출원 (동선절연용 고내열 바니쉬)
특허 제99-35238호 등록출원 (접착력을 증가시킨 고내열 절연용 바니쉬)
유망중소기업선정-한빛은행 청주지점
벤처기업선정-중소기업청
특허 제20-2000-5582등록출원
청정실의 신발바닥 오물제거용 접착시트 장치 권취장치(眷取裝置)
일본 도호세이기와의 공동특허로 일본에도 동시 출원
3차 5억원 유상증자 (자본금총액:1,762,750천원)
특허 제2000-18637호 등록출원
인쇄회로 기판의 제작장치 및 그 방법
일본 니레코 코퍼레이션(Nireco corp)과 공동특허로 일본에도 동시 출원
외국인투자기업등록-대한무역진흥공사
수출유망 중소기업 지정-충북중소기업수출지원센터
특허 제2000-0085987호 등록출원
바니쉬조성물 및 이를 이용한 자기융착성 에나멜선
UL 가승인
특허 제 0336401호 등록
인쇄회로 기판의 제작장치 및 그 방법
우레탄 복합 판넬 난연3급 표면시험 합격-방재시험연구원
CLEAN사업장 인정-노동부
ISO 9001:2000 인증 획득-중소기업인증센터
경영 혁신형 중소기업 선정-충북지방중소기업청장
(주)엠씨에스로 상호변경
경영혁신형 중소기업으로 선정
ISO 9001 인증 획득
기업부설연구소 인정
ISO 14001 인증 획득
[ ISO9001] [ ISO14001]
11
CORPORATIONMicro Chemical System MCS
Yangji Chemical Co., Ltd established, having its Head Office and plant at
Moknae-Dong, Ansan Industrial Complex, Gyunggi-Province.
Main Product : Hot Melt Adhesives for Book Binding and Packaging
Changed name to Yangji High Polymer Co., Ltd
Moved Head Office and Production to newly built Gyesan Factory.
Added Poly Urethane Adhesives, Rigid and Flexible Foam, both for Panel Industry
and Construction Field.
Acquired ISO 9002 in the field of production and service of Hotmelt and
Poly Urethane from Small & Medium Industry Certification Center (SMICC)
Increased capital to make total of \900Mil
Acquired "Prospective Enterprise" by Main Bank; Hanvit Bank of Korea(now called Woori Bank)
Awarded "Prospective Venture Enterprise" by Small & Medium Business Administration
Increased capital up to \1800Mil, including Foreigner's Investment of \750Mil.
Registered as Foreigner Invested Enterprise
Qualified as "Prospective Export Enterprise" by Chungbuk_Do Province Authority
Changed name to Microchemsys Corp
UL approved for Wire Coating Varnish
Acquired Grade III in Combustibility for Poly Urethane Panel from KFPA
Awarded "Clean Plant" from Ministry of Labor
Awarded ISO9001 by SMICC
Changed name to MCS CO.,LTD.
MCS was selected as an outstanding middle-small company.
Awarded ISO9001
R&D Lab affiliated with MCS corporation.
Awarded ISO14001
Dec., 1978
Aug., 1992
Aug., 1994
Sept., 1997
Oct., 1998
Nov., 1999
Dec., 1999
April 2000
April 2000
July 2000
Jan., 2001
June 2001
Sept., 2002
Oct., 2002
April 2004
April 2007
May 2011
June 2011
April 2012
June 2012