multifunctional measuring device ロータリーセン...
TRANSCRIPT
特徴• 非接触ホール技術• RMB3600シリーズは5760°までの測定範囲• シングルおよびマルチターン • True-Power-Onシステム:電源が投入されていない場合でも ターン数をカウントします。 (特許取得済みの不揮発性技術により歯車や電池不要)• 中実または中空シャフト • 保護等級 IP67, IP6K9K• 産業および車載アプリケーションに最適化• 分解能12ビット(シングルターン)または最大18ビット(マルチターン)• 最大±0.03%のアブソリュートリニアリティ• シングルまたはマルチチャネルバージョン
アプリケーション•機械工学 繊維機械 包装機械 板金およびワイヤー加工機械•医療機器•車載機器 産業トラック 建設機械 農業機械
NOVOHALLロータリーセンサー 非接触RSB-3600シリーズRMB-3600シリーズ
非接触ロータリセンサ非常に頑丈な設計でダブルベアリングシステムを採用しています。コンパクトOD 36mmフルメタルハウジングです。
センサはホール技術をベースにしており、True- Power-Onマルチターンはさらに最大16回転の測定にGMR技術(巨大磁気抵抗)を利用しています。
IP6K9Kヘビーデューティバージョンは、高いベアリング負荷を含む極限環境アプリケーションに最適です。
ステータを一体化した半中空シャフトで、高価な別個の軸継手を必要としません。異なる長さの標準的なM12コネクタまたはケーブルが利用可能です。
幅広い種類をご用意しており、アナログとデジタルのインターフェースを選択できます。(アナログ推奨)
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
Dimension drawing 3
Mechanical data 4
5
Singleturn RSB-3600 6
Output Characteristics
Technical data analog versions 7
Ordering specifications analog versions 8
Technical data digital versions 9
Ordering specifications digital versions 10
Multiturn RSM-3600
Output Characteristics
Technical data analog versions 11
Ordering specifications analog versions 13
Technical data digital versions 14
Ordering specifications digital versions 15
Accessories
Shaft couplings 16
M12 connector system 17
Signal processing 18
Contents
Page 2 Back to contents
寸法図
機械的データ
シングルターン RSB-3600出力特性技術的データ アナログ仕様注文仕様 アナログ仕様技術的データ 増加インターフェース仕様注文仕様 増加インターフェース仕様
マルチターン RMB-3600出力特性技術的データ アナログ仕様注文仕様 アナログ仕様技術的データ デジタル仕様注文仕様 デジタル仕様
アクセサリシャフトカップリングM12コネクターシステム表示器付多機能計測装置
Dimension drawing 3
Mechanical data 4
5
Singleturn RSB-3600 6
Output Characteristics
Technical data analog versions 7
Ordering specifications analog versions 8
Technical data digital versions 9
Ordering specifications digital versions 10
Multiturn RSM-3600
Output Characteristics
Technical data analog versions 11
Ordering specifications analog versions 13
Technical data digital versions 14
Ordering specifications digital versions 15
Accessories
Shaft couplings 16
M12 connector system 17
Signal processing 18
Contents
Page 2 Back to contents
目次
Dimension drawing 3
Mechanical data 4
5
Singleturn RSB-3600 6
Output Characteristics
Technical data analog versions 7
Ordering specifications analog versions 8
Technical data digital versions 9
Ordering specifications digital versions 10
Multiturn RSM-3600
Output Characteristics
Technical data analog versions 11
Ordering specifications analog versions 13
Technical data digital versions 14
Ordering specifications digital versions 15
Accessories
Shaft couplings 16
M12 connector system 17
Signal processing 18
Contents
Page 2 Back to contents
3
4
567810
1112131415
161718
寸法図
ピン割り当て M12, 8 pin
ピン割り当て M12, 4 pin
A-コード
A-コード
CAD データ www.novotechnik.de/en/down-load/cad-data/
RSB/RMB-3601 RSB/RMB-3624 RSB/RMB-3607 Ø 6 mm シャフト Ø 10 mm シャフトヘビーデューティ Ø 6 mm 中空シャフト
取付クランプ
シャフトの取付寸法
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
Dimension Drawing
Page 3 Back to contents
Pin assignment M12, 8 pin
Pin assignment M12, 4 pin
A-coded
A-coded
CAD data see www.novotechnik.de/en/download/cad-data/
RSB/RMB-3601 RSB/RMB-3624 RSB/RMB-3607 Ø 6 mm shaft Ø 10 mm shaft heavy duty Ø 6 mm hollow shaft
Mounting clamp
機械データ (Mechanical Data)
寸法 (Dimensions) 寸法図参照取付(Mounting) クランプ 3 x Z1-15 (納入時に同梱)
または正面ねじを介して 4 x M3ステーターカップリング
機械的動作範囲(Mechanical travel) 360 連続 °
許容動作速度(機械的)(Permitted operating speed (mechanical) *)
12 000 6000 12 000 min-1
ベアリング寿命(Bearing lifetime) 100 万回の動き許容軸荷重(アキシャル/ラジアル)静的または動的
(Permitted shaft load (axial / radial)static or dynamic)
40 / 50 100 / 100 40 / 50 N
トルク(Torque @ RT 20 °C typ. **) 0.3 3 0.5 Ncm
重量(接続なし)Weight (without connection) ca. 100 g
振動 (Vibration (IEC 60068-2-6) 5 ... 2000Amax = 0.75amax = 20
Hzmmg
衝撃 Shock (IEC 60068-2-27) 50 (6 ms) g
保護等級(Protection class (ISO 20653)本体側 (housing side)シャフト側 (shaft side)
IP67IP65
IP6K9KIP67
IP67IP65
温度範囲(Operating temperature) -30 ... +85 (connector), -40 ... +85 (cable), higher temperatures on request °C
動作湿度範囲(Operating humidity range) 0 ... 98 (no condensation) % R.H.
*) マルチターンセンサー RMB: 有効なで許容される動作速度max. 800 min-1
**) 環境温度および停止時間に依存して、シャフトの最初の作動のために必要な力が増加する
機械的データ
型式 (Description) Ø 6 mm シャフトRSB-/RMB3601-_ _ _ - _ _ _ - _ _ _
Ø 10 mm シャフトヘビーデューティRSB-/RMB3624-_ _ _ - _ _ _ - _ _ _
Ø 6 mm 中空シャフトRSB-/RMB3607-_ _ _ - _ _ _ - _ _ _
材質 (Material) フランジ: アルミニウム、アルマイト処理、 AlSiMgBiカバー: 亜鉛メッキ, St 12 1.0330シャフト: ステンレス, X10CrNiS18-9 1.4305
カップリング:ステンレス, X10CrNi 18-8 1.4310
電気的接続 (Electrical connections) ケーブル 4 x 0.5 mm², AWG 20, シールドされた, ケーブル接続長さ 1 m, 3 m, 5 m, 10 mケーブル 4 x 2 x 0.25 mm², AWG 24, ツイストペア シールド,ケーブルグランド,長さ 1 m, 3 m, 5 m, 10 mコネクター M12x1 4 pin / 8 pin
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
Mechanical Data
Dimensions see dimension drawing
Mounting with 3 fixing clamps Z1-15 (included in delivery)or via frontal thread 4 x M3
Stator coupling
Mechanical travel 360 continuous °
Permitted operating speed (mechanical) * 12 000 6000 12 000 min-1
Bearing lifetime 100 million movements
Permitted shaft load (axial / radial)static or dynamic
40 / 50 100 / 100 40 / 50 N
Torque @ RT 20 °C typ. ** 0.3 3 0.5 Ncm
Weight (without connection) ca. 100 g
Vibration (IEC 60068-2-6) 5 ... 2000Amax = 0.75amax = 20
Hzmmg
Shock (IEC 60068-2-27) 50 (6 ms) g
Protection class (ISO 20653)housing sideshaft side
IP67IP65
IP6K9KIP67
IP67IP65
Operating temperature -30 ... +85 (connector), -40 ... +85 (cable), higher temperatures on request °C
Operating humidity range 0 ... 98 (no condensation) % R.H.
*) Multiturn sensor RMB: permitted operating speed with valid output signal max. 800 min-1
**) Depending on the environmental temperature and standstill time, the necessary force for the inital operating of the shaft may increase
Mechanical Data
Page 4 Back to contents
Description Ø 6 mm shaftRSB-/RMB3601-_ _ _ - _ _ _ - _ _ _
Ø 10 mm shaft heavy dutyRSB-/RMB3624-_ _ _ - _ _ _ - _ _ _
Ø 6 mm hollow shaftRSB-/RMB3607-_ _ _ - _ _ _ - _ _ _
Material Flange: anodized aluminum, AlSiMgBiCover: galvanized steel, St 12 1.0330Shaft: stainless steel, X10CrNiS18-9 1.4305
Coupling: stainless steel, X10CrNi 18-8 1.4310
Electrical connections Cable 4 x 0.5 mm², AWG 20, shielded, cable connection, length 1 m, 3 m, 5 m, 10 mCable 4 x 2 x 0.25 mm², AWG 24, twisted pair, shielded, cable gland, length 1 m, 3 m, 5 m, 10 mConnector M12x1 4 pin / 8 pin
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
出力特性 シングルターンMultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
シングルタイプ:反時計回りに上昇
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
一部冗長、冗長タイプ:時計回りに上昇
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
要求に応じて:異なるグラデーション
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
要求に応じて:2つのオフセット特性
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
要求に応じて:パラボラ出力特性
要求に応じて:一部冗長、冗長タイプ 信号2=0.5×信号1
シングルタイプ:時計回りに上昇
要求に応じて:台形出力特性
Output CharacteristicsSingleturn
Page 5 Back to contents
One-channel, cw One-channel, ccw
Two channels, crossed characteristics, channel 1 cw On request: Two channels, signal 2 = 0.5 x signal 1
On request: Different gradients
On request: 2 offset output characteristics On request: Parabolic output characteristic
On request: Trapezoid output characteristics
技術的データ アナログ仕様 - 電圧- 電流シングルターン RSB-3600
タイプ別 型式(Type Designations)
RSB-3601- _ _ _ - 2 _ _ - _ _ _レシオメトリック(Ratiometric)
RSB-3601- _ _ _ - 1 1 _ - _ _ _ アナログ電圧(Analog voltage)
RSB-3601- _ _ _ - 1 2 _ - _ _ _アナログ電流 (Analog current)
電気的仕様(Electrical Data)出力信号 (Ouput signal) 供給電圧に対するレシオメトリック
0.25 ... 4.75 V0.5 ... 4.5 V(負荷 >1 kΩ)
0.1 ... 10 V (負荷 >10 kΩ)
4 ... 20 mA(負担 < 500 Ω)
チャンネル数 (Number of channels) 1 / 2 1 1
更新レート (Update rate) typical 5 kHz
分解能 (Resolution) 12 Bit
測定角度範囲 (Measuring range) 0 ... 30 up to 0 ... 360 (10°-steps) °
測定角度範囲における絶対直線性360°(Absolute linearity at measuring range 360°)
< 0.8 ±% FS
繰り返し精度 (Repeatability) < 0.1 °
ヒステリシス (Hysteresis) < 0.1 °
測定レンジにおける温度誤差360°Temperature error at measuring range 360°
< 0.6 < 1.6 < 1.9 ±% FS
電源電圧Ub (Supply voltage Ub) 5 (4.5 ... 5.5) 24 (18 ... 30) 24 (18 ... 30) VDC
消費電流 (負荷なし)(Current consumption (w/o load) typical 15 (typ. 8 リクエストに応じて) チャンネルごと mA
逆電圧保護 (Reverse voltage) あり:供給ライン 短絡保護 (Short circuit protection ) あり: ( GND と 電源電圧)絶縁抵抗 (500 VDC) (Insulation resistance (500 VDC)
> 10 MΩ
ケーブル断面 (Cross-section cable) 4 pole: 0.5 (AWG 20), 8 pole: 0.25 (AWG 24) mm2
環境データ (Environmental Data)MTTF (DIN EN ISO 13849-1 パーツ・カウント・メゾット、負荷なし)
356 (1-チャンネル) 210 (チャンネルごとに)一部冗長388 (チャンネルごとに)冗長
107 105 yearsyearsyears
機能安全(Functional safety) 安全関連システムで当社製品を使用する際に支援が必要な場合は、当社までご連絡くださいEMCとの相互性 (EMC compatibility) EN 61000-4-2 Electrostatic discharge (ESD) 4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields 10 V/mEN 61000-4-4 Fast transients (Burst) 1 kVEN 61000-4-6 Conducted disturbances, induced by RF-fields 10 V eff.EN 61000-4-8 Power frequency magnetic fields 30 A/mEN 55016-2-3 Radiated disturbances class B
接続 (Connection assignment)
シングルタイプ
信号 ケーブルコード B4_
コネクター M12コード FM4
コネクタとケーブル (付属品を参照)
電源電圧 Ub 茶 pin 1 茶
信号出力 緑 pin 2 白
GND 白 pin 3 青
接続なし 黄 pin 4 黒
シールド シールド シールド -
一部冗長タイプ
信号 ケーブル コード B4_
コネクター M12コード FM4
コネクタとケーブル(付属品を参照)
電源電圧 Ub 茶 pin 1 茶
信号出力 1 緑 pin 2 白
GND 白 pin 3 青
信号出力 2 黄 pin 4 黒
シールド シールド シールド -
完全冗長タイプ
信号 ケーブル コード B8_
コネクタ M12コード FM8
コネクタとケーブル(付属品を参照)
GND 1 白 pin 1 白
電源電圧 Ub 茶 pin 2 茶
信号出力 1 緑 pin 3 緑
接続なし 黄 pin 4 黄
信号出力 2 灰 pin 5 灰
接続なし 桃 pin 6 桃
GND 2 青 pin 7 青
電源電圧 Ub 赤 pin 8 赤
型式仕様 RSB-36_ _-2 _ _-51_- _ _ _供給電圧 5 VDC
電気的仕様出力信号 A+ / A-
B+ / B-Z+ / Z-
レベル RS-422, TTL-compatible長さ Zパルス AとBの2つのエッジの距離1回転当たりのパルス 1024, 他の解像度は 12ページを参照してください ppr1回転当たりのカウント (求積後) 4096低速オプション- 最小エッジスピレーション- カウンター入力の最小入力周波数- 最大動作速度
8321 800
µskHzmin-1
高速オプション- 最小エッジスピレーション- カウンター入力の最小入力周波数- 最大動作速度
0.5500 ベアリングの回転速度により制限されます(機械的データを参照)
µskHz
測定角度範囲 360 °絶対直線性 < 1 ±% FS繰り返し精度 < 0.1 °ヒステリシス < 0.7 °温度誤差 < 0.375 ±% FS電源電圧Ub 5 (4.5 ... 5.5) VDC消費電流(負荷なし) typical 20 mA逆電圧保護 あり。供給ラインと出力短絡保護 あり。GNDと電源電圧 出力でのΩ負荷 > 120 (チャンネルごとA / B / Z) Ω絶縁抵抗 (500 VDC) > 10 MΩケーブル断面 0.25 (AWG 24) mm2
環境データMTTF (DIN EN ISO 13849-1パーツ、カウント・メゾット、負荷なし)
246 years
機能安全 当社の製品を安全関連システムで使用する際にサポートが必要な場合は、お問い合わせくださいEMCとの相互性 EN 61000-4-2 Electrostatic discharge (ESD) 4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields 10 V/mEN 61000-4-4 Fast transients (Burst) 1 kVEN 61000-4-6 Conducted disturbances, induced by RF fields 10 V eff.EN 61000-4-8 Power frequency magnetic fields 30 A/mEN 55016-2-3 Radiated disturbances class B
技術的データ増加インターフェース
シングルターン RSB-3600
接続信号 ケーブル
コード B8_ コネクターM12コード FM8
ケーブル付きコネクター(付属品を参照)
GND WH pin 1 WH電源電圧 Ub BN pin 2 BNA+ GN pin 3 GNA- YE pin 4 YEB+ GY pin 5 GYB- PK pin 6 PKZ+ BU pin 7 BUZ- RD pin 8 RD
Page 8 Back to contents
シャフトマーキングがハウジングフランジの平坦化方向を指しているとき、センサ出力は電気的中心位置にあります。
シャフトマーキングがハウジングフランジの平坦化方向を指しているとき、センサ出力は電気的中心位置にあります。
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
Technical Data Analog Versions - Voltage- CurrentSingleturn RSB-3600
Type Designations RSB-3601- _ _ _ - 2 _ _ - _ _ _Ratiometric
RSB-3601- _ _ _ - 1 1 _ - _ _ _ Analog voltage
RSB-3601- _ _ _ - 1 2 _ - _ _ _Analog current
Electrical Data
Ouput signal ratiometric to supply voltage 0.25 ... 4.75 V0.5 ... 4.5 V(load >1 kΩ)
0.1 ... 10 V (load >10 kΩ)
4 ... 20 mA(burden < 500 Ω)
Number of channels 1 / 2 1 1
Update rate typical 5 kHz
Resolution 12 Bit
Measuring range 0 ... 30 up to 0 ... 360 (10°-steps) °
Absolute linearity at measuring range 360° < 0.8 ±% FS
Repeatability < 0.1 °
Hysteresis < 0.1 °
Temperature error at measuring range 360° < 0.6 < 1.6 < 1.9 ±% FS
Supply voltage Ub 5 (4.5 ... 5.5) 24 (18 ... 30) 24 (18 ... 30) VDC
Current consumption (w/o load) typical 15 (typ. 8 on request) per channel mA
Reverse voltage yes, supply lines
Short circuit protection yes (vs. GND and supply voltage)
Insulation resistance (500 VDC) > 10 MΩ
Cross-section cable 4 pole: 0.5 (AWG 20), 8 pole: 0.25 (AWG 24) mm2
Environmental Data
MTTF (DIN EN ISO 13849-1parts count method, w/o load, wc)
356 (one-channel) 210 (per channel) partly redundant388 (per channel) fully redundant
107 105 yearsyearsyears
Functional safety If you need assistance in using our products in safety-related systems, please contact us
EMC compatibility EN 61000-4-2 Electrostatic discharge (ESD) 4 kV, 8 kVEN 61000-4-3 Electromagnetic fields 10 V/mEN 61000-4-4 Fast transients (Burst) 1 kVEN 61000-4-6 Conducted disturbances, induced by RF-fields 10 V eff.EN 61000-4-8 Power frequency magnetic fields 30 A/mEN 55016-2-3 Radiated disturbances class B
Connection assignment
One-channel versions
Signal Cable code B4_
Connector M12code FM4
Connector with cable (see accessories)
Supply voltage Ub BN pin 1 BN
Signal output GN pin 2 WH
GND WH pin 3 BU
Not assigned YE pin 4 BK
Shield shield shield -
Partly redundant versions
Signal Cable code B4_
Connector M12code FM4
Connector with cable(see accessories)
Supply voltage Ub BN pin 1 BN
Signal output 1 GN pin 2 WH
GND WH pin 3 BU
Signal output 2 YE pin 4 BK
Shield shield shield -
Page 6 Back to contents
Fully redundant versions
Signal Cable code B8_
Connector M12code FM8
Connector with cable(see accessories)
GND 1 WH pin 1 WH
Supply voltage Ub BN pin 2 BN
Signal output 1 GN pin 3 GN
Not assigned YE pin 4 YE
Signal output 2 GY pin 5 GY
Not assigned PK pin 6 PK
GND 2 BU pin 7 BU
Supply voltage Ub RD pin 8 RD
When the shaft marking is pointing towards the flattening on the housing flange, the sensor output is near of the electrical center position.
アナログ仕様- 電圧- 電流シングルターン RSB-3600
– ––R 126361063BS 1
供給電圧1: 24 V (18 ... 30 V)2: 5 V (4.5 ... 5.5 V)
電気接続ケーブル シングルおよび一部冗長、ケーブル、 4 極、シールドB41: L = 1 mB43: L = 3 mB45: L = 5 mB40: L = 10 m
完全冗長、ケーブル、 8極、シールドB81: L = 1 mB83: L = 3 mB85: L = 5 mB80: L = 10 m
電気接続コネクタFM4: M12x1, 4 ピン、シングルおよび一部冗長FM8: M12x1, 8 ピン、完全冗長
出力特性1: 時計回りcwに上昇 2: 反時計回りccwに上昇3: 交差出力チャネル1時計回りcwに上昇(一部冗長)4: 交差出力チャネル1時計回りcwに上昇(完全冗長)
測定範囲03:測定範囲0°...30°min....06, 12, 18, 24, 36...36:測定範囲0°...360°max.要求に応じて他の角度
電源電圧での 出力信号= 24 V1: 0.1 ... 10 V 2: 4 ... 20 mA
電源電圧での出力信号 = 5 V1: 0.25 ... 4.75 V 供給電圧に対するレシオメトリック2: 0.5...4.5V 供給電圧に対するレシオメトリック
出力チャンネル数6: シングル (1x 供給電源; 1x 出力) 7: 一部冗長 (1x 供給電源 ; 2x 出力) ( 電源電圧のみ= 5 V) 8: 完全冗長 (2x 供給電源 ; 2x 出力) (電源電圧のみ = 5 V)
シリーズRSB-3600 (シングルターン)
機械仕様3601: シンクロフランジ、シャフト Ø 6 mm x 12.5 mm3624: シンクロフランジ、ヘビーデューティーバージョン、シャフト Ø 10 mm x 20 mm3607: 丸フランジ、中空シャフト Ø 6 mm要求に応じて他のフランジとシャフトの設計
– MF 4
型式・仕様
推奨品は太字で記載しています。
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
Ordering SpecificationsAnalog Versions- Voltage- CurrentSingleturn RSB-3600
– ––R 126361063BS 1
Supply voltage1: 24 V (18 ... 30 V)2: 5 V (4.5 ... 5.5 V)
Electrical connection cable Single and partly redundant, cable, 4 pole, shieldedB41: L = 1 mB43: L = 3 mB45: L = 5 mB40: L = 10 mFully redundant, cable, 8 pole, shieldedB81: L = 1 mB83: L = 3 mB85: L = 5 mB80: L = 10 m
Electrical connection connectorFM4: M12x1, 4 pin, single and partly redundantFM8: M12x1, 8 pin, fully redundant
Output characteristics1: Rising cw 2: Rising ccw 3: Crossed outputs channel 1 rising cw (partly redundant)4: Crossed outputs channel 1 rising cw (fully redundant)
Measuring range03: Measuring range 0° ... 30° min....06, 12, 18, 24, 36...36: Measuring range 0° ... 360° max.other angles on rquest
Output signal at supply voltage = 24 V1: 0.1 ... 10 V 2: 4 ... 20 mA
Output signal at supply voltage = 5 V1: 0.25 ... 4.75 V ratiometric to supply voltage2: 0.5 ... 4.5 V ratiometric to supply voltage
Number of channels6: Single (1x supply voltage; 1x output) 7: Partly redundant (1x supply voltage ; 2x output) (only supply voltage = 5 V) 8: Fully redundant (2x supply voltage; 2x output) (only supply voltage = 5 V)
SeriesRSB-3600 (Singleturn)
Mechanical version3601: Synchro flange, shaft Ø 6 mm x 12.5 mm3624: Synchro flange, heavy duty version, shaft Ø 10 mm x 20 mm3607: Round flange, hollow shaft Ø 6 mmOther flange and shaft designs on request
– MF 4
Ordering specifications Preferred types printed in bold
Page 7 Back to contents
型式仕様 RSB-36_ _-2 _ _-51_- _ _ _供給電圧 5 VDC
電気的仕様出力信号 A+ / A-
B+ / B-Z+ / Z-
レベル RS-422, TTL-compatible長さ Zパルス AとBの2つのエッジの距離1回転当たりのパルス 1024, 他の解像度は 12ページを参照してください ppr1回転当たりのカウント (求積後) 4096低速オプション- 最小エッジスピレーション- カウンター入力の最小入力周波数- 最大動作速度
8321 800
µskHzmin-1
高速オプション- 最小エッジスピレーション- カウンター入力の最小入力周波数- 最大動作速度
0.5500 ベアリングの回転速度により制限されます(機械的データを参照)
µskHz
測定角度範囲 360 °絶対直線性 < 1 ±% FS繰り返し精度 < 0.1 °ヒステリシス < 0.7 °温度誤差 < 0.375 ±% FS電源電圧Ub 5 (4.5 ... 5.5) VDC消費電流(負荷なし) typical 20 mA逆電圧保護 あり。供給ラインと出力短絡保護 あり。GNDと電源電圧 抵抗負荷 > 120 (チャンネルごとA / B / Z) Ω絶縁抵抗 (500 VDC) > 10 MΩケーブル断面 0.25 (AWG 24) mm2
環境データMTTF (DIN EN ISO 13849-1パーツ、カウント・メゾット、負荷なし)
246 years
機能安全 当社の製品を安全関連システムで使用する際にサポートが必要な場合は、お問い合わせくださいEMCとの相互性 EN 61000-4-2 Electrostatic discharge (ESD) 4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields 10 V/mEN 61000-4-4 Fast transients (Burst) 1 kVEN 61000-4-6 Conducted disturbances, induced by RF fields 10 V eff.EN 61000-4-8 Power frequency magnetic fields 30 A/mEN 55016-2-3 Radiated disturbances class B
技術的データ増加インターフェース
シングルターン RSB-3600
接続信号 ケーブル
コード B8_ コネクターM12コード FM8
ケーブル付きコネクター(付属品を参照)
GND WH pin 1 WH電源電圧 Ub BN pin 2 BNA+ GN pin 3 GNA- YE pin 4 YEB+ GY pin 5 GYB- PK pin 6 PKZ+ BU pin 7 BUZ- RD pin 8 RD
Page 8 Back to contents
シャフトマーキングがハウジングフランジの平坦化方向を指しているとき、センサ出力は電気的中心位置にあります。
技術的データ増加インターフェースシングルターン RSB-3600
増加プロトコル
Page 9 Back to contents
電気的データ1回転当たりのパルス 1024 512 256 128 ppr1回転当たりのカウント(求積後) 4096 2048 1024 512低速オプション- 最小エッジスピレーション- カウンター入力の最小入力周波数- 最大動作速度
8321800
323600
32*7200**
32*14400**
µskHzmin-1
高速オプション0.5500 500 500* 105* 下記参照**
µskHz
*) 低速ではカウンター入力の最小入力周波数の要件が緩和されます(下記のチャートを参照) **) 最高使用速度はベアリングの最高回転速度によって制限されます (機械的データを参照)
- 最小エッジスピレーション- カウンター入力の最小入力周波数- 最大動作速度
Page 10 Back to contents
デジタル仕様増加インターフェースシングルターン RSB-3600
‒ ‒‒R 152121063BS 5
インターフェース5: 増加インターフェース A / B / Z
増加インターフェイスのインターフェイスパラメータ低速モード(最小エッジ間隔8 µs) 15: 5 V (4.5 ... 5.5 V) 電源電圧、出力 RS422、TTL- 互換性あり
高速モード(最小エッジ間隔0.5 µs) 10: 5V(4.5...5.5V)電源電圧、出力RS422、TTL-互換性あり
要求に応じて24V電源電圧(以下同様に要求に応じ対応) モーター転流用のABZ信号の代わりにUVW信号 電源オン(電源バースト状態)での絶対位置 ハイサイドおよびローサイド出力。
インターフェース2: デジタルインターフェース
シリーズRSB-3600 (シングルターン)
機械仕様3601: シンクロフランジ、シャフト Ø 6 mm x 12.5 mm3624: シンクロフランジ、ヘビービューティーバージョン、シャフト、 Ø 10 mm x 20 mm3607: 丸フランジ、中空シャフト Ø 6 mm要求に応じて他のフランジとシャフトの設計
‒ MF 8
型式仕様
電気接続ケーブルB81: L = 1 mB83: L = 3 mB85: L = 5m B80: L = 10 m
電気接続コネクタFM8: M12x1
解像度増加インターフェース 5_ _12: 1024ppr-4096 カウント (求積後)11: 512ppr-2048 カウント (求積後)10: 256ppr-1024 カウント (求積後)09: 128ppr- 512 カウント (求積後)要求に応じてその他の角度
推奨品は太字で記載しています。
出力特性マルチターン
測定範囲15〜16ターンの出力信号
測定範囲2〜14ターンの出力信号
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
Output CharacteristicsMultiturn
Page 11 Back to contents
Output signals measuring range 15 ... 16 turns
Output signals measuring range 2 ... 14 turns
技術的データアナログ仕様 - 電圧- 電流 マルチターン RMB-3600
タイプ別型式 RMB-3601- _ _ _ -2 _ _ - _ _ _レシオメトリック(Ratiometric)
RMB-3601- _ _ _ -11_ - _ _ _アナログ電圧(Analog voltage)
RMB-3601- _ _ _ -12 _ - _ _ _アナログ電流(Analog current)
電気データ (Electrical Data)出力信号 (Output signal) レシオメトリック
(負荷 > 10 kΩ)0.1 ... 10 V(負荷 > 10 kΩ)
4 ... 20 mA(負担 < 500 Ω)
出力チャンネル数 (Number of channels) 1 / 2 1 / 2 1
分解能 (Resolution) 16 bit
スタートタイム (Start time) typical 10 ms
反応時間 (Response time) < 2 ms
測定角度範囲 (Measuring range) 0 ... 720 up to 0 ... 5760 (360°-steps) °
直線性 (Linearity) 下記の表を参照してください繰り返し精度 (Repeatability) < 0.5 °
ヒステリシス (Hysteresis) < 1 °
温度誤差 (Temperature error) < 0.15 < 0.31 < 0.625 ±% FS
電源電圧Ub (Supply voltage Ub) 5 (4.5 ... 5.5) 24 (18 ... 30) 24 (18 ... 30) VDC
消費電流(負荷なし)Current consumption (w/o load) typical 30 mA
逆電圧保護 (Reverse voltage) あり、供給ラインと出力
短絡保護 (Short circuit protection) あり、 ( GND と電源電圧 )絶縁抵抗(500VDC)Insulation resistance (500 VDC) > 10 MΩ
ケーブル断面 (Cross-section cable) 0.5 (AWG 20) mm2
環境データ (Environmental Data)MTTF (DIN EN ISO 13849-1パーツ・カウント・メゾット、負荷なし parts count method. w/o load. wc)
175 シングルタイプ175 (チャンネルごと)冗長
184 シングルタイプ184 (チャンネルごと)冗長
186 シングルタイプ yearsyears
機能安全 (Functional safety) 安全関連システムで当社製品を使用する際に支援が必要な場合は、当社までご連絡くださいEMCとの相互性 (EMC compatibility) EN 61000-4-2 Electrostatic discharge (ESD) 4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields 10 V/mEN 61000-4-4 Fast transients (Burst) 1 kVEN 61000-4-6 Conducted disturbances, induced by RF fields 10 V eff.EN 61000-4-8 Power frequency magnetic fields 30 A/mEN 55016-2-3 Radiated disturbances class B
線形性 (Linearities)
測定範囲 (Measuring range) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Turns
絶対リニアリティ (Absolute linearity max.) 0.5 0.417 0.375 0.350 0.333 0.321 0.313 0.306 0.300 0.295 0.292 0.288 0.286 0.283 0.281 ±% FS
単独リニアリティ typ. (Independent linearity typ.) 0.250 0.167 0.125 0.100 0.083 0.071 0.063 0.056 0.050 0.045 0.042 0.039 0.036 0.033 0.031 ±% FS
単独リニアリティ max. (Independent linearity max.) 0.350 0.267 0.225 0.200 0.183 0.171 0.163 0.156 0.150 0.145 0.142 0.138 0.136 0.133 0.131 ±% FS
接続シングルタイプ
信号 ケーブル コード B4_
コネクタ M12コード FM4
コネクタとケーブル(付属品を参照)
供給電圧 Ub 茶 pin 1 茶
信号出力 緑 pin 2 白
GND 白 pin 3 青
接続なし 黄 pin 4 黒
シールド シールド シールド -
冗長
信号 ケーブルコード B4_
コネクター M12コード FM4
コネクタとケーブル(付属品を参照)
供給電圧 Ub 茶 pin 1 茶
信号出力 1 緑 pin 2 白
GND 白 pin 3 青
信号出力 2 黄 pin 4 黒
シールド シールド シールド -
シャフトマーキングがハウジングフランジ上の平坦化方向を指しているとき、センサは整数回転位置に配置されています。
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
Technical Data Analog Versions - Voltage- Current Multiturn RMB-3600
Type Designations RMB-3601- _ _ _ -2 _ _ - _ _ _Ratiometric
RMB-3601- _ _ _ -11_ - _ _ _Analog voltage
RMB-3601- _ _ _ -12 _ - _ _ _Analog current
Electrical Data
Output signal ratiometric (load > 10 kΩ)
0.1 ... 10 V(load > 10 kΩ)
4 ... 20 mA(burden < 500 Ω)
Number of channels 1 / 2 1 / 2 1
Resolution 16 bit
Start time typical 10 ms
Response time < 2 ms
Measuring range 0 ... 720 up to 0 ... 5760 (360°-steps) °
Linearity see table below
Repeatability < 0.5 °
Hysteresis < 1 °
Temperature error < 0.15 < 0.31 < 0.625 ±% FS
Supply voltage Ub 5 (4.5 ... 5.5) 24 (18 ... 30) 24 (18 ... 30) VDC
Current consumption (w/o load) typical 30 mA
Reverse voltage yes, supply lines and outputs
Short circuit protection yes (vs. GND and supply voltage)
Insulation resistance (500 VDC) > 10 MΩ
Cross-section cable 0.5 (AWG 20) mm2
Environmental Data
MTTF (DIN EN ISO 13849-1parts count method. w/o load. wc)
175 one-channel175 (per channel) redundant
184 one-channel184 (per channel) redundant
186 one-channel years
years
Functional safety If you need assistance in using our products in safety-related systems, please contact us
EMC compatibility EN 61000-4-2 Electrostatic discharge (ESD) 4 kV, 8 kVEN 61000-4-3 Electromagnetic fields 10 V/mEN 61000-4-4 Fast transients (Burst) 1 kVEN 61000-4-6 Conducted disturbances, induced by RF fields 10 V eff.EN 61000-4-8 Power frequency magnetic fields 30 A/mEN 55016-2-3 Radiated disturbances class B
Linearities
Measuring range 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Turns
Absolute linearity max. 0.5 0.417 0.375 0.350 0.333 0.321 0.313 0.306 0.300 0.295 0.292 0.288 0.286 0.283 0.281 ±% FS
Independent linearity typ. 0.250 0.167 0.125 0.100 0.083 0.071 0.063 0.056 0.050 0.045 0.042 0.039 0.036 0.033 0.031 ±% FS
Independent linearity max. 0.350 0.267 0.225 0.200 0.183 0.171 0.163 0.156 0.150 0.145 0.142 0.138 0.136 0.133 0.131 ±% FS
Page 12 Back to contents
Copnnection assignment
One-channel versions
Signal Cable code B4_
Connector M12code FM4
Connector with cable(see accessories)
Supply voltage Ub BN pin 1 BN
Signal output GN pin 2 WH
GND WH pin 3 BU
Not assigned YE pin 4 BK
Shield shield shield -
Redundant versions
Signal Cablecode B4_
Connector M12code FM4
Connector with cable(see accessories)
Supply voltage Ub BN pin 1 BN
Signal output 1 GN pin 2 WH
GND WH pin 3 BU
Signal output 2 YE pin 4 BK
Shield shield shield -
When the shaft marking is pointing towards the flattening on the housing flange, the sensor is located on an integer turn position.
– ––R 120101063BM 1
供給電圧 1: 24 V (18 ... 30 V)2: 5 V (4.5 ... 5.5 V)
電気接続ケーブル B41: L = 1 mB43: L = 3 mB45: L = 5 mB40: L = 10 m
電気接続コネクタFM4: M12x1
出力特性1: 時計回りcwに上昇2: 反時計回りccwに上昇3: 交差出力チャネル1時計回りcwに上昇(冗長)要求に対するその他の出力特性
電源電圧 信号出力= 5 V1: 0.25 ... 4.75 V レシオメトリック 2: 0.5 ... 4.5 V レシオメトリック
電源電圧 信号出力= 24 V1: 0.1 ... 10 V2: 4... 20 mA (1チャンネルのみ)
出力特性の巻数002 = 2から016 = 16ターン、1ターン増分003, 006, 010, 016要求に応じて他の測定範囲
シリーズRMB-3600 (マルチターン)
機械仕様3601: シンクロ フランジ、シャフト Ø 6 mm x 12.5 mm3624: シンクロ フランジ ヘビーデューティーバージョン、シャフト Ø 10 mm x 20 mm3607: 丸フランジ、空中シャフト Ø 6 mm要求に応じて他のフランジとシャフトの設計
– MF 4
型式・仕様
推奨品は太字で記載しています。
アナログ仕様 - 電圧- 電流マルチターン RMB-3600
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
– ––R 120101063BM 1
Supply voltage1: 24 V (18 ... 30 V)2: 5 V (4.5 ... 5.5 V)
Electrical connection cable B41: L = 1 mB43: L = 3 mB45: L = 5 mB40: L = 10 m
Electrical connection connectorFM4: M12x1
Output characteristics1: Rising cw 2: Rising ccw 3: Crossed outputs channel 1 rising cw (redundant)Other output characteristics on request
Output signal at supply voltage = 5 V1: 0.25 ... 4.75 V ratiometric 2: 0.5 ... 4.5 V ratiometric
Output signal at supply voltage = 24 V1: 0.1 ... 10 V2: 4... 20 mA (only one-channel)
Number of turns for output characteristicFrom 002 = 2 turns up to 016 = 16 turns, increment 1 turn003, 006, 010, 016Other measuring ranges on request
SeriesRMB-3600 (Multiturn)
Mechanical version3601: Synchro flange, shaft Ø 6 mm x 12.5 mm3624: Synchro flange, heavy duty version, shaft Ø 10 mm x 20 mm3607: Round flange, hollow shaft Ø 6 mmOther flange and shaft designs on request
– MF 4
Ordering specifications Preferred types printed in bold
Ordering SpecificationsAnalog Versions - Voltage- CurrentMultiturn RMB-3600
Page 13 Back to contents
Page 14 Back to contents
型式仕様 RMB-36_ _-2_ _-44 _- _ _ _電源電圧 24 VDC
電気的仕様プロトコル SSI 入力 RS422-互換性あり, CLK-linesは電気的に絶縁されたフォトカプラを介している単安定時間(tm) 20 ±1 µsコーディング グレイ、バイナリ更新率(内部) 1 kHz分解能 測定範囲全体で16または18 Bit測定範囲 注文仕様を参照ください絶対直線性 14 ターン: < 0.036
16 ターン: < 0.031±% FS±% FS
繰り返し精度 < 0.5 °ヒステリシス < 1 °温度誤差 < 0.1 ±% FS電源電圧Ub 24 (10 ... 32), (5 V on request) VDC消費電流 (負荷なし) typical 10 mA逆電圧保護 あり。供給ラインと出力短絡保護 あり。 (対GND、最大1分)抵抗負荷 > 120 Ω最大クロックレート 1 MHz絶縁抵抗 (500 VDC) > 10 MΩケーブル断面 0.25 (AWG 24) mm2
環境データMTTF (DIN EN ISO 13849-1パーツ、カウント、メソッド 負荷なし)
173 Years
機能安全 当社の製品を安全関連システムで使用する際にサポートが必要な場合は、お問い合わせください。 EMCとの相互性 EN 61000-4-2 Electrostatic discharge (ESD) 4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields 10 V/mEN 61000-4-4 Fast transients (Burst) 1 kVEN 61000-4-6 Conducted disturbances, induced by RF fields 10 V eff.EN 61000-4-8 Power frequency magnetic fields 30 A/mEN 55016-2-3 Radiated disturbances class B
技術的データデジタル仕様- SSIマルチターン RMB-3600
接続 信号 ケーブル
コード B8_コネクター M12コード FM8
ケーブル付きコネクター (付属品を参照)
GND WH pin 1 WH電源電圧 Ub BN pin 2 BNCLK + GN pin 3 GNCLK - YE pin 4 YEData + GY pin 5 GYData - PK pin 6 PK接続なし BU pin 7 BU接続なし RD pin 8 RD
シャフトマーキングがハウジングフランジ上の平坦化方向を指しているとき、センサーは整数回転位置に配置されています。
Page 15 Back to contents
注文仕様
デジタル仕様マルチターン RMB-3600
‒ ‒‒R 444121063BM 1
インターフェース4: 同期シリアルインターフェイス (SSI)
インターフェースパラメータSSIインターフェース41: SSI 16 ビット, グレイコード, 時計回りcwに上昇43: SSI 25 ビット(18ビットデータ), グレイコード, 時計回りcwに上昇45: SSI 16 ビット, バイナリコード, 時計回りcwに上昇47: SSI 25 ビット(18ビットデータ), バイナリコード, 時計回りcwに上昇
シリーズRMB-3600
機械仕様3601: シンクロフランジ、シャフト Ø 6 mm x 12.5 mm3624: シンクロフランジ、ヘビーデューティーバージョン、 シャフト Ø 10 mm x 20 mm3607: 丸フランジ、中空シャフト Ø 6 mm要求に応じて他のフランジとシャフトの設計
‒ MF 8
注文型式
電気接続ケーブルB81: L = 1 mB83: L = 3 mB85: L = 5 mB80: L = 10 m
電気接続コネクターFM8: M12x1
出力特性(ターン数)14: 14 ターン = 5040°, 測定範囲が制御されています16: 16 ターン = 5760°, 測定範囲が制御されていません
インターフェース2: デジタルインターフェース
(マルチターン)
推奨品は太字で記載しています。
シャフトカップリング
軸径6〜10mm、バックラッシュフリー、ダブルカルダン用シャフトカップリング
材料 アルミニウム、 PEEK
最大 トルク 1 Nm
動作温度 -40 ... +160° C
最大 変位 ラジアル 0.1 mm, 角度 0.45 °
取付 2 内部六角形のネジ山付きピン
タイプ ØA ØB P/N
Z-106-G6 6 6 103910
Z-106-G-6,35 6 6,35 103912
Z-106-G10 6 10 103913
軸径6mm、フォークカップリング、低バックラッシュ
材料 ステンレス鋼、 グランド駆動ピン
最大 変位 1 mm
取付 2 フィリスターヘッドネジ M3 それぞれが内部六角形を備えています。アングルネジ SW 1.5 納品時に含まれます。
タイプ ØA ØB P/N
Z-104-G-6 6 6 005690
車軸6mm、フォークカップリング、バックラッシュフリー
材料 陽極酸化アルミニウム、黒 駆動ピンとバネ硬化
最大 変位 1 mm
最大 トルク 5 Ncm
取付 1フィラーヘッドスクリューM3に、それぞれ六角形のインナー六角形が付いています。スクリュードライバーSW 2.5 が同梱れています。
タイプ P/N
Z-105-G-6 005691
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
Page 16 Back to contents
Shaft couplings
Shaft coupling for 6 up to 10 mm shaft diameters, backlash-free, double cardanic
Material Aluminum, PEEK
Max. torque 1 Nm
Operating temperature -40 ... +160° C
Max. displacements radial 0.1 mm, angular 0.45 °
Mounting 2 threaded pins with internal hexagon
Type ØA ØB P/N
Z-106-G6 6 6 103910
Z-106-G-6,35 6 6,35 103912
Z-106-G10 6 10 103913
Fork coupling for 6 mm shaft diameters, low backlash
Material stainless steel, ground driving pin
Max. displacement 1 mm
Mounting 2 fillister head screws M3 each with internal hexagon.Angle screwdriver SW 1.5 in delivery included.
Type ØA ØB P/N
Z-104-G-6 6 6 005690
Fork coupling for 6 mm shaft diameters, backlash-free
Material anodized aluminum, black, driving pin and spring hardened
Max. displacement 1 mm
Max. transferable torque 5 Ncm
Mounting 1 fillister head screw M3 each with intenal hexagon. Angle screwdriver SW 2.5 in delivery included.
Type P/N
Z-105-G-6 005691
Page 16 Back to contents
Shaft couplings
Shaft coupling for 6 up to 10 mm shaft diameters, backlash-free, double cardanic
Material Aluminum, PEEK
Max. torque 1 Nm
Operating temperature -40 ... +160° C
Max. displacements radial 0.1 mm, angular 0.45 °
Mounting 2 threaded pins with internal hexagon
Type ØA ØB P/N
Z-106-G6 6 6 103910
Z-106-G-6,35 6 6,35 103912
Z-106-G10 6 10 103913
Fork coupling for 6 mm shaft diameters, low backlash
Material stainless steel, ground driving pin
Max. displacement 1 mm
Mounting 2 fillister head screws M3 each with internal hexagon.Angle screwdriver SW 1.5 in delivery included.
Type ØA ØB P/N
Z-104-G-6 6 6 005690
Fork coupling for 6 mm shaft diameters, backlash-free
Material anodized aluminum, black, driving pin and spring hardened
Max. displacement 1 mm
Max. transferable torque 5 Ncm
Mounting 1 fillister head screw M3 each with intenal hexagon. Angle screwdriver SW 2.5 in delivery included.
Type P/N
Z-105-G-6 005691
Page 16 Back to contents
Shaft couplings
Shaft coupling for 6 up to 10 mm shaft diameters, backlash-free, double cardanic
Material Aluminum, PEEK
Max. torque 1 Nm
Operating temperature -40 ... +160° C
Max. displacements radial 0.1 mm, angular 0.45 °
Mounting 2 threaded pins with internal hexagon
Type ØA ØB P/N
Z-106-G6 6 6 103910
Z-106-G-6,35 6 6,35 103912
Z-106-G10 6 10 103913
Fork coupling for 6 mm shaft diameters, low backlash
Material stainless steel, ground driving pin
Max. displacement 1 mm
Mounting 2 fillister head screws M3 each with internal hexagon.Angle screwdriver SW 1.5 in delivery included.
Type ØA ØB P/N
Z-104-G-6 6 6 005690
Fork coupling for 6 mm shaft diameters, backlash-free
Material anodized aluminum, black, driving pin and spring hardened
Max. displacement 1 mm
Max. transferable torque 5 Ncm
Mounting 1 fillister head screw M3 each with intenal hexagon. Angle screwdriver SW 2.5 in delivery included.
Type P/N
Z-105-G-6 005691
Page 16 Back to contents
Shaft couplings
Shaft coupling for 6 up to 10 mm shaft diameters, backlash-free, double cardanic
Material Aluminum, PEEK
Max. torque 1 Nm
Operating temperature -40 ... +160° C
Max. displacements radial 0.1 mm, angular 0.45 °
Mounting 2 threaded pins with internal hexagon
Type ØA ØB P/N
Z-106-G6 6 6 103910
Z-106-G-6,35 6 6,35 103912
Z-106-G10 6 10 103913
Fork coupling for 6 mm shaft diameters, low backlash
Material stainless steel, ground driving pin
Max. displacement 1 mm
Mounting 2 fillister head screws M3 each with internal hexagon.Angle screwdriver SW 1.5 in delivery included.
Type ØA ØB P/N
Z-104-G-6 6 6 005690
Fork coupling for 6 mm shaft diameters, backlash-free
Material anodized aluminum, black, driving pin and spring hardened
Max. displacement 1 mm
Max. transferable torque 5 Ncm
Mounting 1 fillister head screw M3 each with intenal hexagon. Angle screwdriver SW 2.5 in delivery included.
Type P/N
Z-105-G-6 005691
M12 コネクタシステム
M12x1メスコネクタ、4ピン、ストレート、Aコード、モールドケーブル付き、シールド付き、IP67、オープンエンド
コネクタ材料 プラスチック PA
ケーブルシース PUR; Ø = 最大 6 mm,-25 °C...+80 °C (移動した)-50 °C...+80 °C (一定)
ワイヤー PP, 0.34 mm2
1 = 茶 2 = 白3 = 青 4 = 黒
ピン 割り当て
長さ タイプ P/N2 m EEM 33-32 0056005 m EEM 33-62 00560910 m EEM 33-97 005650
ピン 割り当て M12x1メスコネクタ、4ピン、角度付き、Aコード、モールドケーブル付き、シールド付き、IP67、オープンエンド
コネクタ材料 プラスチック PA
ケーブルシース PUR; Ø = 最大 6 mm,-25 °C...+80 °C (移動した)-50 °C...+80 °C (一定)
ワイヤー PP, 0.34 mm2
長さ タイプ P/N2 m EEM 33-33 0056015 m EEM 33-63 00561010 m EEM 33-99 005696
ピン 割り当て M12x1メスコネクタ、8ピン、ストレート、Aコード、モールドケーブル付き、シールド付き、IP67、オープンエンド
コネクタ材料 プラスチック PA
ケーブルシース PUR; Ø = 最大 8 mm,-25 °C...+80 °C (移動した)-50 °C...+80 °C (一定)
ワイヤー PP, 0.25 mm2
1 = 白 2 = 茶3 = 緑4 = 黄5 = 灰6 = 桃7 = 青 8 = 赤
長さ タイプ P/N2 m EEM33-86 0056295 m EEM33-90 00563510 m EEM33-92 005637
ピン 割り当て M12x1メスコネクタ、8ピン、角度付き、Aコード、モールドケーブル付き、シールド付き、IP67、オープンエンド
コネクタ材料 プラスチック PA
ケーブルシース PUR; Ø = 最大 8 mm,-25 °C...+80 °C (移動した)-50 °C...+80 °C (一定)
ワイヤー PP, 0.25 mm2
1 = 白 2 = 茶3 = 緑4 = 黄5 = 灰6 = 桃7 = 青 8 = 赤
長さ タイプ P/N2 m EEM33-87 0056305 m EEM33-91 00563610 m EEM33-93 005638
注:保護クラスは、プラグがロックされた状態でのみ有効です。過酷な環境でのこれらの製品の適用は、特定の場合にチェックする必要があります。
保護クラス DIN EN 60529
UL 承認済み
非常に良い電磁気互換性(EMC)およびシールドシステム油に対する非常に良好な耐性、冷却剤および潤滑剤
ドラッグチェーンの用途に適しています
1 = 茶 2 = 白3 = 青 4 = 黒
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
Connector System M12
Page 17 Back to contents
M12x1 Mating female connector, 4-pin, straight, A-coded, with molded cable, shielded, IP67, open ended
Connector housing Plastic PA
Cable sheath PUR; Ø = max. 6 mm,-25 °C...+80 °C (moved)-50 °C...+80 °C (fixed)
Wires PP, 0.34 mm2
1 = brown 2 = white3 = blue 4 = black
Pin assignment
Length Type P/N
2 m EEM 33-32 005600
5 m EEM 33-62 005609
10 m EEM 33-97 005650
Pin assignment M12x1 Mating female connector, 4-pin, angled, A-coded, with molded cable, shielded, IP67, open ended
Connector housing Plastic PA
Cable sheath PUR; Ø = max. 6 mm,-25 °C...+80 °C (moved)-50 °C...+80 °C (fixed)
Wires PP, 0.34 mm2
1 = brown 2 = white3 = blue 4 = black
Length Type P/N
2 m EEM 33-33 005601
5 m EEM 33-63 005610
10 m EEM 33-99 005696
Pin assignment M12x1 Mating female connector, 8-pin, straight, A-coded, with molded cable, shielded, IP67, open ended
Connector housing Plastic PA
Cable sheath PUR; Ø = max. 8 mm,-25 °C...+80 °C (moved)-50 °C...+80 °C (fixed)
Wires PP, 0.25 mm2
1 = white 2 = brown3 = green4 = yellow5 = grey6 = pink7 = blue 8 = red
Length Type P/N
2 m EEM 33-86 005629
5 m EEM 33-90 005635
10 m EEM 33-92 005637
Pin assignment M12x1 Mating female connector, 8-pin, angled, A-coded, with molded cable, shielded, IP67, open ended
Connector housing Plastic PA
Cable sheath PUR; Ø = max. 8 mm,-25 °C...+80 °C (moved)-50 °C...+80 °C (fixed)
Wires PP, 0.25 mm2
1 = white 2 = brown3 = green4 = yellow5 = grey6 = pink7 = blue 8 = red
Length Type P/N
2 m EEM 33-87 005630
5 m EEM 33-91 005636
10 m EEM 33-93 005638
Note: The protection class is valid only in locked position with its plugs.The application of these products in harsh environments must be checked in particular cases.
Protection class to DIN EN 60529
UL - approved
Very good Electromagnetic Compatibility (EMC) and shield systems
Very good resistance to oils, coolants und lubricants
Suited for applications in dragchains
MultifunctionalMeasuring Devicewith Display
Series MAP4000
Special Features• processor controlled measu-ring device with digital display • 24 bit Sigma-Delta converterfor high accuracy and stability • good cost/value ratio • multifunctional: inputs for– potentiometer– DC voltage– current / voltage– resistance– temperature sensors• adjustable supply voltageoutput (5...24 V/max. 1.2 W)• input easily selectable byprogramming • display projection -99 999...999 999• accuracy 0.1 % +1Digit offull scale• Tc 100 ppm/°K • up tp 40 measurements/s• 2 different supply ranges:10..30 V or 80..250 V DC orAC• measured unit can beshown in display
Options• up to 4 programmable limitswitches via relays• analog output interfaces RS 232 or RS 485• built in measuring datamemory, readable using inter-face
The micro processor controlledprocess meters of theMAP4000 series show a highaccuracy at a very goodcost/value ratio. They enablethe direct adaption of poten-tiometric sensors as well as ofsensors with normalized analog output signals.
Due to the programmingcapability, the desired inputvariable can be flexibly adjusted.
Precision and safety The high accuracy of up to0.1% is achieved by usingselected components, as forexample the 24 bit Sigma-Delta converter.
2 programming levels areavailable: One code protectedconfiguration menu and a usermenu with the option to applyrestrictions there to excludeend user errors. The program-ming is stored in a non volatileEEPROM memory.
Designed for your needsEven the standard versionoffers a depth of functions(projection, digital filters,mathematic functions etc.).With optional extensions (limitswitches, analog output, inter-faces etc.), this functionalitymay be considerably expan-ded.
Adjustable supply voltageThis supply is adequate forconnected Sensors. It is adjustable by means of a trimming potentiometer between 5...24V, the outputpower is max. 1.2 W.
OperationThe instrument is operatedusing 5 buttons on the frontpanel or via serial interface.
当社のデータシートに記載されている仕様は、情報提供のみを目的としています。文書化された仕様値は、理想的な動作条件および環境条件に基づいており、実際の顧客アプリケーションによって大きく異なる可能性があります。指定された性能範囲の1つまたはそれ以上の近くで製品を使用すると、他の性能パラメータに関する制限が発生する可能性があります。したがって、エンドユーザが、意図されたアプリケーション内の関連する性能パラメータを検証することが必要であります。当社は予告なく製品仕様を変更する権利を留保します。
D618701Bj 2020.07.29
M 010000104PA 1
ナンバーコンパレータリレー0:なし2:2リレー4:4リレー
表示色1: 赤
データストレージ(インターフェースのみ)0:保存しない1:RTCストレージ2:FASTストレージ
アナログ出力0:アナログ出力なし1:アナログ出力あり
シリーズ 供給電圧00: 10 ... 30 V AC/DC10: 80 ... 250 V AC
調整可能な電源電圧(5〜24 V /最大1,2 W)1:電源電圧付き
インタフェース0:インタフェースなし1:RS2322:RS 485
特別な機能
•供給電圧10〜30 VDC、80〜250 V DCまたはAC•高精度•電位差信号と標準化信号の直接接続•5 ... 24 Vのセンサー用の調整可能な供給電圧•温度係数100 ppm / K オプションのRS 232、RS 485、アナログ出力、リミテッドスイッチ 詳細はMAP-4000のデータシートを参照してください
- - -
表示器付多機能計測装置
MultifunctionalMeasuring Devicewith Display
Page 18 Back to contents
NovotechnikMesswertaufnehmer OHG
Postfach 422073745 Ostfildern (Ruit)Horbstraße 1273760 Ostfildern (Ruit)
Telefon +49 711 4489-0Telefax +49 711 [email protected]
© 04/2019
Printed in Germany.
– ––M 010000104PA 1
Number comparator relays0: none2: 2 relays 4: 4 relays
Display colour1: red
Data storage (only with interface)0: not storage1: RTC storage2: FAST storage
Analog output0: no analog output1: analog output present
Series Supply voltage00: 10 ... 30 V AC/DC10: 80 ... 250 V AC
Adjustable supply voltage (5 ... 24 V / max. 1,2 W)1: with supply voltage
Ordering specifications
Interface0: no interface1: RS 2322: RS 485
Special features• Supply voltage 10 ... 30 VDC, 80 ... 250 V DC or AC• high accuracy• direct connection of potentiometric and standardized signals• adjustable supply voltage for sensoren 5 ... 24 V• Temperature coefficient 100 ppm/K• optional RS 232, RS 485, analog output, limited switch• complete data see separate data sheet MAP-4000
The specifications contained in our datasheets are intended solely for informational purposes. The documented specification values are based on ideal operational and environmental conditions and can vary significantly depending on the actual customer application. Using our products at or close to one or more of the specified performance ranges can lead to limitations regarding other per-formance parameters. It is therefore necessary that the end user verifies relevant performance parameters in the intended application. We reserve the right to change product specifications without notice.
MultifunctionalMeasuring Devicewith Display
Page 18 Back to contents
NovotechnikMesswertaufnehmer OHG
Postfach 422073745 Ostfildern (Ruit)Horbstraße 1273760 Ostfildern (Ruit)
Telefon +49 711 4489-0Telefax +49 711 [email protected]
© 04/2019
Printed in Germany.
– ––M 010000104PA 1
Number comparator relays0: none2: 2 relays 4: 4 relays
Display colour1: red
Data storage (only with interface)0: not storage1: RTC storage2: FAST storage
Analog output0: no analog output1: analog output present
Series Supply voltage00: 10 ... 30 V AC/DC10: 80 ... 250 V AC
Adjustable supply voltage (5 ... 24 V / max. 1,2 W)1: with supply voltage
Ordering specifications
Interface0: no interface1: RS 2322: RS 485
Special features• Supply voltage 10 ... 30 VDC, 80 ... 250 V DC or AC• high accuracy• direct connection of potentiometric and standardized signals• adjustable supply voltage for sensoren 5 ... 24 V• Temperature coefficient 100 ppm/K• optional RS 232, RS 485, analog output, limited switch• complete data see separate data sheet MAP-4000
The specifications contained in our datasheets are intended solely for informational purposes. The documented specification values are based on ideal operational and environmental conditions and can vary significantly depending on the actual customer application. Using our products at or close to one or more of the specified performance ranges can lead to limitations regarding other per-formance parameters. It is therefore necessary that the end user verifies relevant performance parameters in the intended application. We reserve the right to change product specifications without notice.
注文仕様
配線図
ご要望に応じて以下の対応が可能です。
• 異なる出力信号• 調整範囲の拡張• シリアルインターフェース(RS485)
M PU 4 00 -
出力
01 = 0 ... 10 V / 4 ... 20 mA, ガルバニック絶縁(非対応) , Art.no. 05420111 = 0 ... 10 V / 4 ... 20 mA, ガルバニック絶縁(対応) , Art.no. 054202
シリーズ タイプ
0 1
ビー・アンド・プラスはノボテクニク社の日本における正規代理店です。
各種お問合せビー・アンド・プラス355-0311埼玉県比企郡小川町高谷2452-5TEL:0493-71-5160FAX:0493-81-4771E-mail:[email protected]j 2020.06.17
注文仕様
配線図
ご要望に応じて以下の対応が可能です。
• 異なる出力信号• 調整範囲の拡張• シリアルインターフェース(RS485)
M PU 4 00 -
出力
01 = 0 ... 10 V / 4 ... 20 mA, ガルバニック絶縁(非対応) , Art.no. 05420111 = 0 ... 10 V / 4 ... 20 mA, ガルバニック絶縁(対応) , Art.no. 054202
シリーズ タイプ
0 1
ビー・アンド・プラスはノボテクニク社の日本における正規代理店です。
各種お問合せビー・アンド・プラス355-0311埼玉県比企郡小川町高谷2452-5TEL:0493-71-5160FAX:0493-81-4771E-mail:[email protected]j 2020.06.17