plastics
DESCRIPTION
PLASTICS. BY KIM JONES 179711. WHAT ARE PLASTICS?. Plastics are synthetic polymers made from salt, water, chlorine and other additives, depending on the required product and its intended use, collectively they are known as PVC’s – polyvinyl chloride. - PowerPoint PPT PresentationTRANSCRIPT
PLASTICSBY KIM JONES
179711
WHAT ARE PLASTICS? Plastics are synthetic polymers made from salt,
water, chlorine and other additives, depending on the required product and its intended use, collectively they are known as PVC’s – polyvinyl chloride.
A useful website for those wanting a more in depth explanation of PVC, its elements and the manufacturing process. www.pvc.org
PVC’s can be further broken down into groups depending on their application.
TYPES OF PVC AND THEIR USES
70 – 80% of PVC manufactured in Australia, isused in the building and construction industry.Uses for PVC in residential buildings include:• uPVC – rigid unplasticised used by plumbers for
piping – household, stormwater and drainage• Flexible PVC- used as coating on electric wiring
and as lagging on hot water and gas pipes.
• Polyethelene (PPE) –a film used as a waterproof membrane under concrete slabs and footings
- a coating on products used for termite protection such as Trithor, Granitgard strip shielding and insulation products such as Aircell.
Although not widely used in Australia, PVC is also as wall cladding and soffit linings, available in a wide range of colours and textured finishes.
An Australian company, inframe glazing systemsdesigns and manufactures PVC windows andsliding doors. The PVC has UV stablizers and colours added atthe point of manufacture making it attractive inappearance and available in a wide range ofcolours and is resistant to weathering.inframe is WERS accredited company and amember of the HIA
PVC and polyethelene fabrics are used toprotect domestic buildings from the weather inthe form of sun blinds and shade sails.
KEY PROPERTIES Strong and lightweight - abrasion resistant,
toughEasy to install – can be cut, shaped, welded
and joined Durable – resistant to weathering, rotting,
chemical corrosion, shock and abrasion so suitable for long-life and outdoor products above and below ground
Cost effective • Cheap compared with timber and metals • Easy to use - can be cut using a saw or scissors depending on type of plastic• Enhanced by factors of durability, lifespan and low maintenance.• No painting required – colours and UV stablisers added at point of manufacture• Easy to clean
Versatile – varied applications
Environmental impact – lighter than concrete, metal and timber using less energy to transport and install.
durability reduces replacement costs excellent thermal insulation of PVC windows,
cladding and roofing increase energy efficiency able to be recycled fire resistant and less combustible – HCL gas
given off as an aid to early detection
There has been much conjecture over the years about the impact of plastics on human health and the environment. Modern manufacturing processes are strictly governed in accordance with Occupational Health and Safety Act, within Australia and around the world.The Act ensures that end product plastics are safe to humans and the environment. Products made to come into contact with potable water contain no dioxins.
Plastics which humans or the environment have direct contact with are stabilised so no harmful chemicals used in the manufacturing process are able to “leach out”, due to physical contact via touch or inhalation, weathering or cutting for installation.
The Plastics Industry, aware of the common perception that plastics are harmful, have initiated a Product Stewardship Program to address environmental and health issues associated with the life-cycle of PVC’s, from point of manufacture to end of life. There is a strong industry emphasis placed on recycling.
APPLICATIONS OF PVC IN RESIDENTIAL BUILDINGS AND RELEVANT CODES AND STANDARDS
PRODUCT BCA ASWaterproof membrane – polyethylene film ( black plastic )
Part 3.2 Footings and Slabs 3.2.2 Preparation 3.2.2.6 Vapour barriers. p 117
AS 2870 - 1996Section 5 Detailing Requirements5.3.3 Vapour barriers and damp-proofing membranes p 43.
Trithor Termite Protection BarrierGranitguard – strip shielding
Part 3.1 Site Preparation3.1.3 Termite Risk Managementpp 98- 107.
Draincoil flexible corrugated poly pipe – retaining walls
Part 3.1 Site Preparation3.1.2 Drainage3.1.2.2 (b)Drainage requirements p 92
AS 2439 Perforated plastics drainage & effluent pipe & fittings
In –slab plumbing – heating cables & pipes
AS 2870 – 1996Section 5 Detailing Requirements5.3.6 Heating cables & pipes p 46.5.5.4 Plumbing requirements p 49.
Guttering & downpipes Part 3.5 Roof and Wall Cladding3.5.2 Gutters and Downpipespp 235 - 239
AS 1273Unplasticised PVC (uPVC) downpipe and fittings for rainwater
In – house plumbing- water - gas
Windows & sliding doors Part 3.6 GlazingPp 247 - 261
AS 1288 - 1994
APPLICATIONS OF PVC IN RESIDENTIAL BUILDINGS AND RELEVANT CODES AND STANDARDS
PRODUCT BCA ASWall cladding & soffits Part 3.5 Roof & Wall Cladding
Part 3.5.3 Wall CladdingNOTE: Does not specifically deal with PVC cladding.
As the use of PVC is widespread within the drainage and plumbing area of residential buildings another useful source of information is The Plumbing Code of Australia.
SUPPLIERS OF PVC PRODUCTSVinidex- Australian manufacturer ofDRAINCOIL Corrugated Subsoil Drainage Pipe & fittingsuPVC pipes & fittings for stormwater and sewerageapplicationsinframe glazing systems – manufacturers of windows &sliding doorsBartlett – local manufacturers of blinds, shade sails &water storage products
NOTE: This list is not comprehensive