procedure to install cygwin in windows 7
DESCRIPTION
Step by step :Procedure to install cygwin in Windows 7TRANSCRIPT
7/21/2019 Procedure to Install Cygwin in Windows 7
http://slidepdf.com/reader/full/procedure-to-install-cygwin-in-windows-7 1/5
Procedure to install cygwin in Windows 7.doc Page 1 of 5
Procedure to install cygwin in Windows 7
1.
Double click to run Setup.
2. Choose “Install from Local Directory”, and click “Next”.
3. Set the “Root Directory” to “C:\cygwin”. Then click “Next”.
7/21/2019 Procedure to Install Cygwin in Windows 7
http://slidepdf.com/reader/full/procedure-to-install-cygwin-in-windows-7 2/5
Procedure to install cygwin in Windows 7.doc Page 2 of 5
4. Set the “Local Package Directory” to your setup folder (cygwin_installation). Then click “Next”.
5.
Click on the “All-Default” to toggle it to “All-install” to install all package. Then click “ Next”.
7/21/2019 Procedure to Install Cygwin in Windows 7
http://slidepdf.com/reader/full/procedure-to-install-cygwin-in-windows-7 3/5
Procedure to install cygwin in Windows 7.doc Page 3 of 5
6. Click “ Next” as the below screen.
7.
Wait until the installation process finished.
7/21/2019 Procedure to Install Cygwin in Windows 7
http://slidepdf.com/reader/full/procedure-to-install-cygwin-in-windows-7 4/5
Procedure to install cygwin in Windows 7.doc Page 4 of 5
8. Select to place the cygwin to Desktop and StartMenu.
9.
Click the Cygwin icon to open a BASH shell.
10. To get toolchains.tar.bz2, download gcc_sdk_part1.zip and gcc_sdk_part2.zip from our FTP
server: ftp://210.3.29.84\sdk\creon\
Username: wwuser
Password: productwell
In binary folder, there is a file called toolchains.tar.bz2, put toolchains.tar.bz2 under C:\.
7/21/2019 Procedure to Install Cygwin in Windows 7
http://slidepdf.com/reader/full/procedure-to-install-cygwin-in-windows-7 5/5
Procedure to install cygwin in Windows 7.doc Page 5 of 5
11. In BASH shell, type the following to change the location and unpack the toolchain (the
toolchain will place to the /opt directory). Some codes will run inside the BASH shell.
$ cd /
$ tar –xjvf /cygdrive/c/toolchain.tar.bz2
12. Open the file .bashrc using WORDPAD (located at C:\cygwin\home\<your username>). Type
the following at the end of the file. (If there is no .bashrc file in your home directory, jump to
Step 13 to get the files) You may also refer to the following screen shot (for .bashrc) with RED
bracket.
PATH=$PATH:/opt/gcc_arm/bin:/opt/spectra_util
export PATH
13.
Close the BASH shell and open it again. Then you can compile your application throughCygwin.
14.
[For those who cannot find .bashrc in C:\cygwin\home\<your username>]
Go to C:\cygwin\etc\skel, copy the following files to your home directory
C:\cygwin\home\<your username>
.bash_profile
.bashrc
.inputrc
15. You can then go to your application folder by typing following command: (e.g. the application
folder is located at C:\Project\CREON\TestApp\EDCVM)
cd /cygdrive/c/Project/CREON/TestApp/EDCVM
16.
In the current folder with makefile, type the following command for compile:
make clean - clean tms file that compile in previous time
make gcc - compile the application
make load - load the tms file, you have to fill in COM port number, agentID and key
before you type this command