product datasheet - 菱電商事株式会社 such vibrations can cause tag attachment to loose and...
TRANSCRIPT
![Page 1: PRODUCT DATASHEET - 菱電商事株式会社 such vibrations can cause tag attachment to loose and eventually RFID can be silicon, epoxy or other elastic adhesive material. Place the](https://reader031.vdocuments.pub/reader031/viewer/2022030505/5ab321ca7f8b9a6b468e2378/html5/thumbnails/1.jpg)
PRODUCT DATASHEETConfidex
Rugged RFID tag for electronic license plates
Device type
Air interface protocol
Operational frequency
IC type
Memory configuration
EPC memory content
Read range
Applicable surface materials
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with
maximum allowed operating power according to ETSI EN 302 208 (2W
ERP).
may have an effect on performance.
On metal
1/
PRODUCT DATASHEETConfidex
Rugged RFID tag for electronic license plates
ELECTRICAL SPECIFICATION
Device type
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
EU 865
US 902
IC type
Impinj
Memory configuration
EPC
EPC memory content
Unique number encoded as a
Read range
EU
US on
Applicable surface materials
Metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with
maximum allowed operating power according to ETSI EN 302 208 (2W
ERP).
may have an effect on performance.
RADIATION PATTERNS
On metal
/2
PRODUCT DATASHEETConfidex
Rugged RFID tag for electronic license plates
ELECTRICAL SPECIFICATION
Device type
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
EU 865
US 902
IC type
Impinj
Memory configuration
EPC 496 b
EPC memory content
Unique number encoded as a
Read range
on
US on metal up to
Applicable surface materials
Metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with
maximum allowed operating power according to ETSI EN 302 208 (2W
EU = 865
may have an effect on performance.
RADIATION PATTERNS
On metal
PRODUCT DATASHEETConfidex
Rugged RFID tag for electronic license plates
ELECTRICAL SPECIFICATION
Device type
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
EU 865 - 869 MHz
US 902 - 928 MHz
Impinj Monza
Memory configuration
496 b
EPC memory content
Unique number encoded as a
Read range
on metal up to
metal up to
Applicable surface materials
Metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with
maximum allowed operating power according to ETSI EN 302 208 (2W
EU = 865
may have an effect on performance.
RADIATION PATTERNS
On metal
O
PRODUCT DATASHEETConfidex
Rugged RFID tag for electronic license plates
ELECTRICAL SPECIFICATION
Device type
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
869 MHz
928 MHz
Monza
Memory configuration
496 bit; User 128 bit; TID 96 bit
EPC memory content
Unique number encoded as a
Read range (2W ERP)
metal up to
metal up to
Applicable surface materials
Metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with
maximum allowed operating power according to ETSI EN 302 208 (2W
EU = 865 - 868 MHz, US = 902
may have an effect on performance.
RADIATION PATTERNS
ANTENNA
OVER
PRODUCT DATASHEETConfidex License Plate Tag
Rugged RFID tag for electronic license plates
ELECTRICAL SPECIFICATION
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
869 MHz
928 MHz
Monza 4E
Memory configuration
it; User 128 bit; TID 96 bit
EPC memory content
Unique number encoded as a
(2W ERP)
metal up to
metal up to
Applicable surface materials
Metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
may have an effect on performance.
RADIATION PATTERNS
ANTENNA
VER THIS SIDE
BACKGROUND
PRODUCT DATASHEETLicense Plate Tag
Rugged RFID tag for electronic license plates
ELECTRICAL SPECIFICATION
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
869 MHz
928 MHz
4ETM
Memory configuration
it; User 128 bit; TID 96 bit
EPC memory content
Unique number encoded as a
(2W ERP)
metal up to 8
metal up to 7
Applicable surface materials
Metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
may have an effect on performance.
RADIATION PATTERNS
ANTENNA WRAPPED
THIS SIDE
BACKGROUND
PRODUCT DATASHEETLicense Plate Tag
Rugged RFID tag for electronic license plates
ELECTRICAL SPECIFICATION
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
Memory configuration
it; User 128 bit; TID 96 bit
EPC memory content
Unique number encoded as a
(2W ERP)*
8 m /
7 m /
Applicable surface materials
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
may have an effect on performance.
RADIATION PATTERNS
WRAPPED
THIS SIDE IN THE
BACKGROUND
PRODUCT DATASHEETLicense Plate Tag
Rugged RFID tag for electronic license plates
ELECTRICAL SPECIFICATION
Class 1 Generation 2 passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000
it; User 128 bit; TID 96 bit
Unique number encoded as a
m / 26
m / 23
Applicable surface materials
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
may have an effect on performance.
RADIATION PATTERNS
WRAPPED
IN THE
BACKGROUND
PRODUCT DATASHEETLicense Plate Tag
Rugged RFID tag for electronic license plates
ELECTRICAL SPECIFICATION
Class 1 Generation 2 passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000
it; User 128 bit; TID 96 bit
Unique number encoded as a
26 ft
23 ft
Applicable surface materials*
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902 - 928 MHz.
may have an effect on performance.
PRODUCT DATASHEETLicense Plate Tag
Rugged RFID tag for electronic license plates
ELECTRICAL SPECIFICATION
Class 1 Generation 2 passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000
it; User 128 bit; TID 96 bit
Unique number encoded as a default
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
928 MHz.
PRODUCT DATASHEETLicense Plate Tag
Rugged RFID tag for electronic license plates
Class 1 Generation 2 passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000-6C
it; User 128 bit; TID 96 bit
default
* Read ranges are theoretical values that are calculated for non
optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
928 MHz.
PRODUCT DATASHEETLicense Plate Tag
Rugged RFID tag for electronic license plates
Class 1 Generation 2 passive UHF RFID transponder
6C
default
* Read ranges are theoretical values that are calculated for non
optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
928 MHz. Different surface materials
PRODUCT DATASHEETLicense Plate Tag™
Rugged RFID tag for electronic license plates
Class 1 Generation 2 passive UHF RFID transponder
* Read ranges are theoretical values that are calculated for non
optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
PRODUCT DATASHEET ™
Rugged RFID tag for electronic license plates
Class 1 Generation 2 passive UHF RFID transponder
* Read ranges are theoretical values that are calculated for non
optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
Rugged RFID tag for electronic license plates
Class 1 Generation 2 passive UHF RFID transponder
* Read ranges are theoretical values that are calculated for non
optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
Class 1 Generation 2 passive UHF RFID transponder
* Read ranges are theoretical values that are calculated for non-reflective
optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
© Confidex 201
reflective
optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
© Confidex 201
01
reflective
optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
© Confidex 201
01-2013
© Confidex 201
2013
[email protected] www.confidex.com
© Confidex 2013
2013
www.confidex.com
MECHANICAL SPECIFICATION
Tag materials
High quality engineering plastics.
Weight
12
Delivery format
Single
Amount in box
960
Dimensions
58
ENVIRONMENTAL
Operating temperature
-30°C to +60
Ambient temperature
-30°C to +60°C /
IP classification
IP65
Weather ability
Suitable for outdoor use
Impact
Very good protection against physical impacts
Chemical resistance
Tolerates vehicle washing process with typical solvents
Expected lifetime
Years in normal operating conditions
Values in
environmental conditions depends on the combination of all influencing
factors,
final suitability for certain environmental condition
be tested.
3
www.confidex.com
MECHANICAL SPECIFICATION
Tag materials
High quality engineering plastics.
Weight
12 g
Delivery format
Single
Amount in box
960pcs
Dimensions
58 x
ENVIRONMENTAL
Operating temperature
30°C to +60
Ambient temperature
30°C to +60°C /
IP classification
IP65
Weather ability
Suitable for outdoor use
Impact
Very good protection against physical impacts
Chemical resistance
Tolerates vehicle washing process with typical solvents
Expected lifetime
Years in normal operating conditions
Values in
environmental conditions depends on the combination of all influencing
factors,
final suitability for certain environmental condition
be tested.
www.confidex.com
MECHANICAL SPECIFICATION
Tag materials
High quality engineering plastics.
Weight
Delivery format
Single
Amount in box
pcs
Dimensions
x 44
ENVIRONMENTAL
Operating temperature
30°C to +60
Ambient temperature
30°C to +60°C /
IP classification
Weather ability
Suitable for outdoor use
Impact resistance
Very good protection against physical impacts
Chemical resistance
Tolerates vehicle washing process with typical solvents
Expected lifetime
Years in normal operating conditions
Values in the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
factors, exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
be tested. Contact Confidex for more specific information.
www.confidex.com
MECHANICAL SPECIFICATION
Tag materials
High quality engineering plastics.
Delivery format
Amount in box
Dimensions
x 5
ENVIRONMENTAL
Operating temperature
30°C to +60
Ambient temperature
30°C to +60°C /
IP classification
Weather ability
Suitable for outdoor use
resistance
Very good protection against physical impacts
Chemical resistance
Tolerates vehicle washing process with typical solvents
Expected lifetime
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
www.confidex.com
MECHANICAL SPECIFICATION
Tag materials
High quality engineering plastics.
Delivery format
Amount in box
mm
ENVIRONMENTAL
Operating temperature
30°C to +60°C /
Ambient temperature
30°C to +60°C /
IP classification
Weather ability
Suitable for outdoor use
resistance
Very good protection against physical impacts
Chemical resistance
Tolerates vehicle washing process with typical solvents
Expected lifetime
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
High quality engineering plastics.
Delivery format
mm /
ENVIRONMENTAL
Operating temperature
°C / -22
Ambient temperature
30°C to +60°C / -22
Weather ability
Suitable for outdoor use
resistance
Very good protection against physical impacts
Chemical resistance
Tolerates vehicle washing process with typical solvents
Expected lifetime
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
High quality engineering plastics.
/ 2.28
ENVIRONMENTAL RESISTANCE
Operating temperature
22°F to +1
Ambient temperature
22°F to +1
Suitable for outdoor use
Very good protection against physical impacts
Chemical resistance
Tolerates vehicle washing process with typical solvents
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
High quality engineering plastics.
2.28 x
RESISTANCE
Operating temperature
°F to +1
°F to +1
Suitable for outdoor use
Very good protection against physical impacts
Tolerates vehicle washing process with typical solvents
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
High quality engineering plastics.
x 1.73
RESISTANCE
°F to +140
°F to +140
Very good protection against physical impacts
Tolerates vehicle washing process with typical solvents
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
High quality engineering plastics.
1.73 x 0.
RESISTANCE
40°F
40°F
Very good protection against physical impacts
Tolerates vehicle washing process with typical solvents
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
High quality engineering plastics.
x 0.20
RESISTANCE
°F
°F
Very good protection against physical impacts
Tolerates vehicle washing process with typical solvents
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
20 in
Very good protection against physical impacts
Tolerates vehicle washing process with typical solvents
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
in
Very good protection against physical impacts
Tolerates vehicle washing process with typical solvents
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental conditions is recommended to
Contact Confidex for more specific information.
Very good protection against physical impacts
Tolerates vehicle washing process with typical solvents
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
Contact Confidex for more specific information.
Very good protection against physical impacts
Tolerates vehicle washing process with typical solvents
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
Contact Confidex for more specific information.
Tolerates vehicle washing process with typical solvents
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
Tolerates vehicle washing process with typical solvents
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
Tolerates vehicle washing process with typical solvents
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
![Page 2: PRODUCT DATASHEET - 菱電商事株式会社 such vibrations can cause tag attachment to loose and eventually RFID can be silicon, epoxy or other elastic adhesive material. Place the](https://reader031.vdocuments.pub/reader031/viewer/2022030505/5ab321ca7f8b9a6b468e2378/html5/thumbnails/2.jpg)
Pre
Customized
Customized
Tag is designed to be att
Fixing procedure:
2/
PERSONALIZATION OPTIONS
Pre-encoding
•
Customized
•
Customized
•
INSTALLATION INSTRUCTIONS
Tag is designed to be att
Fixing procedure:
1.
2.
3.
/2
PERSONALIZATION OPTIONS
encoding
•
Customized
•
Customized
•
INSTALLATION INSTRUCTIONS
Tag is designed to be att
Fixing procedure:
1. 2.
3.
PERSONALIZATION OPTIONS
encoding
Customer specific encoding of EPC or user
memory. Locking
Customized
Customer specific layout
text.
Customized
Customer specific layout
numbers, barcodes.
INSTALLATION INSTRUCTIONS
Tag is designed to be att
Fixing procedure:
Make 3,3
Add thin layer (max 0,5mm) of silicone sealant or
adhesive on
shown in picture below.
attachment process and it will prevent possible
vibrations c
term, such vibrations can cause tag attachment to
loose and eventually RFID
can be silicon, epoxy or other elastic adhesive
material.
Place the tag firmly on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Adhesive locations
PERSONALIZATION OPTIONS
encoding
Customer specific encoding of EPC or user
memory. Locking
Customized tampo printing
Customer specific layout
text.
Customized laser engraving
Customer specific layout
numbers, barcodes.
INSTALLATION INSTRUCTIONS
Tag is designed to be att
Fixing procedure:
Make 3,3
Add thin layer (max 0,5mm) of silicone sealant or
adhesive on
shown in picture below.
attachment process and it will prevent possible
vibrations c
term, such vibrations can cause tag attachment to
loose and eventually RFID
can be silicon, epoxy or other elastic adhesive
material.
Place the tag firmly on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Adhesive locations
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking
tampo printing
Customer specific layout
laser engraving
Customer specific layout
numbers, barcodes.
INSTALLATION INSTRUCTIONS
Tag is designed to be att
Fixing procedure:
Make 3,3
Add thin layer (max 0,5mm) of silicone sealant or
adhesive on
shown in picture below.
attachment process and it will prevent possible
vibrations c
term, such vibrations can cause tag attachment to
loose and eventually RFID
can be silicon, epoxy or other elastic adhesive
material.
Place the tag firmly on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Adhesive locations
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking
tampo printing
Customer specific layout
laser engraving
Customer specific layout
numbers, barcodes.
INSTALLATION INSTRUCTIONS
Tag is designed to be att
Make 3,3 - 3
Add thin layer (max 0,5mm) of silicone sealant or
adhesive on
shown in picture below.
attachment process and it will prevent possible
vibrations caused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
loose and eventually RFID
can be silicon, epoxy or other elastic adhesive
material.
Place the tag firmly on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Adhesive locations
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking
tampo printing
Customer specific layout
laser engraving
Customer specific layout
numbers, barcodes.
INSTALLATION INSTRUCTIONS
Tag is designed to be attached on metallic license plate
3,4 mm hole to the license plate
Add thin layer (max 0,5mm) of silicone sealant or
adhesive on two locations of
shown in picture below.
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
loose and eventually RFID
can be silicon, epoxy or other elastic adhesive
Place the tag firmly on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Adhesive locations
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking permanently or with password
tampo printing
Customer specific layout
laser engraving
Customer specific layout
numbers, barcodes.
INSTALLATION INSTRUCTIONS
ached on metallic license plate
mm hole to the license plate
Add thin layer (max 0,5mm) of silicone sealant or
two locations of
shown in picture below.
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
loose and eventually RFID
can be silicon, epoxy or other elastic adhesive
Place the tag firmly on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Adhesive locations
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
permanently or with password
tampo printing
Customer specific layout
laser engraving
Customer specific layout
numbers, barcodes.
INSTALLATION INSTRUCTIONS
ached on metallic license plate
mm hole to the license plate
Add thin layer (max 0,5mm) of silicone sealant or
two locations of
shown in picture below.
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
loose and eventually RFID
can be silicon, epoxy or other elastic adhesive
Place the tag firmly on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Adhesive locations
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
permanently or with password
Customer specific layout including logo or static
Customer specific layout including logo, text,
INSTALLATION INSTRUCTIONS
ached on metallic license plate
mm hole to the license plate
Add thin layer (max 0,5mm) of silicone sealant or
two locations of
shown in picture below. Sealant will both help the
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
loose and eventually RFID
can be silicon, epoxy or other elastic adhesive
Place the tag firmly on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Customer specific encoding of EPC or user
permanently or with password
including logo or static
including logo, text,
INSTALLATION INSTRUCTIONS
ached on metallic license plate
mm hole to the license plate
Add thin layer (max 0,5mm) of silicone sealant or
two locations of
Sealant will both help the
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
loose and eventually RFID-tag may fall off. Sealant
can be silicon, epoxy or other elastic adhesive
Place the tag firmly on the correct location on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Customer specific encoding of EPC or user
permanently or with password
including logo or static
including logo, text,
ached on metallic license plate
mm hole to the license plate
Add thin layer (max 0,5mm) of silicone sealant or
two locations of the tag backside
Sealant will both help the
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
tag may fall off. Sealant
can be silicon, epoxy or other elastic adhesive
correct location on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Customer specific encoding of EPC or user
permanently or with password
including logo or static
including logo, text,
ached on metallic license plate
mm hole to the license plate
Add thin layer (max 0,5mm) of silicone sealant or
the tag backside
Sealant will both help the
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
tag may fall off. Sealant
can be silicon, epoxy or other elastic adhesive
correct location on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
visible from the front of the tag.
Customer specific encoding of EPC or user
permanently or with password
including logo or static
including logo, text,
ached on metallic license plate
mm hole to the license plate
Add thin layer (max 0,5mm) of silicone sealant or
the tag backside
Sealant will both help the
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
tag may fall off. Sealant
can be silicon, epoxy or other elastic adhesive
correct location on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
Customer specific encoding of EPC or user
permanently or with password
including logo or static
including logo, text,
ached on metallic license plate
mm hole to the license plate
Add thin layer (max 0,5mm) of silicone sealant or
the tag backside
Sealant will both help the
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
tag may fall off. Sealant
can be silicon, epoxy or other elastic adhesive
correct location on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
Customer specific encoding of EPC or user
permanently or with password
including logo or static
including logo, text,
ached on metallic license plate
mm hole to the license plate
Add thin layer (max 0,5mm) of silicone sealant or
the tag backside
Sealant will both help the
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
tag may fall off. Sealant
can be silicon, epoxy or other elastic adhesive
correct location on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
© Confidex 201
permanently or with password.
including logo or static
including logo, text,
ached on metallic license plate
Add thin layer (max 0,5mm) of silicone sealant or
the tag backside like
Sealant will both help the
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
tag may fall off. Sealant
can be silicon, epoxy or other elastic adhesive
correct location on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
© Confidex 201
01
.
Add thin layer (max 0,5mm) of silicone sealant or
like
Sealant will both help the
attachment process and it will prevent possible
aused by resonances in vehicle. In long
term, such vibrations can cause tag attachment to
tag may fall off. Sealant
can be silicon, epoxy or other elastic adhesive
correct location on the
plate and attach it with 3,2 mm / 6 mm pop rivet.
Choose the rivet material according to license
plate to avoid rivet corrosion. Rivet will not be
© Confidex 201
01-2013
© Confidex 201
2013
[email protected] www.confidex.com
© Confidex 2013
2013
www.confidex.com
Polarization of Confidex License Plate
its longest dimension.
ORDER INFORMATION
Product number
Product name:
Product number:
Product name:
For
support contact Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY
IN GOOD FAITH,
THE RESULTS DESCRIBED
THE EFFECTIVENESS O
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY
HEREIN.
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
Each
systems incorporating Confidex products, materials, or services will be safe and suitable for use
under end
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
3
www.confidex.com
Polarization of Confidex License Plate
its longest dimension.
ORDER INFORMATION
Product number
Product name:
Product number:
Product name:
For other versions,
support contact Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY
IN GOOD FAITH,
THE RESULTS DESCRIBED
THE EFFECTIVENESS O
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY
HEREIN.
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
under end
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
www.confidex.com
Polarization of Confidex License Plate
its longest dimension.
ORDER INFORMATION
Product number
Product name:
Product number:
Product name:
other versions,
support contact Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY
IN GOOD FAITH,
THE RESULTS DESCRIBED
THE EFFECTIVENESS O
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
under end-use conditions.
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
www.confidex.com
Polarization of Confidex License Plate
its longest dimension.
ORDER INFORMATION
Product number
Product name:
Product number:
Product name:
other versions,
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH, CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
THE RESULTS DESCRIBED
THE EFFECTIVENESS O
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
use conditions.
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
www.confidex.com
Polarization of Confidex License Plate
its longest dimension.
ORDER INFORMATION
Product number
Product name: Confidex
Product number:
Product name: Confidex
other versions,
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER END
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
use conditions.
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
Polarization of Confidex License Plate
its longest dimension.
ORDER INFORMATION
Product number: 3000
Confidex
Product number: 3000
Confidex
other versions,
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
R SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
use conditions. Nothing in this or any other document,
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
Polarization of Confidex License Plate
its longest dimension.
ORDER INFORMATION
3000
Confidex
3000
Confidex
other versions, additional
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
R SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document,
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
Polarization of Confidex License Plate
ORDER INFORMATION
3000517
Confidex License Plate Tag
3000518
Confidex License Plate Tag
additional
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
R SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document,
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
Polarization of Confidex License Plate
ORDER INFORMATION
517
License Plate Tag
518
License Plate Tag
additional
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document,
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
Polarization of Confidex License Plate
License Plate Tag
License Plate Tag
additional information and technical
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document,
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
Polarization of Confidex License Plate
License Plate Tag
License Plate Tag
information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document,
or advice, shall be deemed to alter, vary, supersede, or waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
Polarization of Confidex License Plate Tag
License Plate Tag
License Plate Tag
information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document,
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
TagTM
License Plate TagTM
License Plate TagTM
information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
TM is according to
TM ETSI
TM FCC M4E
information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO EVENT BE
USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
nor any oral recommendation
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
is according to
ETSI
FCC M4E
information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
EVENT BE
USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
nor any oral recommendation
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
is according to
ETSI M4E
FCC M4E
information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
EVENT BE RESPONSIBLE
USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
nor any oral recommendation
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
is according to
M4E
FCC M4E
information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
RESPONSIBLE
DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
nor any oral recommendation
waive any provision of this Disclaimer,
is according to
information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
RESPONSIBLE
DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
nor any oral recommendation
waive any provision of this Disclaimer,
is according to
information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
RESPONSIBLE
DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
nor any oral recommendation
waive any provision of this Disclaimer,