releasenotes analyzer update 2010 08 august

Actix Release Notes Analyzer Update – August 2010 1

August 2010

Analyzer Update Release Notes


1 In this version

This release contains support for new and updated file formats. There are updates for most technologies that Actix supports, with changes falling under the following categories:

• New collection device support

• Decode improvements

• New attributes / modifications to existing attributes

• New mobile device support in existing formats

• Improvements to existing decodes

• Improvements to event detection

• Format Group issues (for example, binning)

• Stability improvements

• Event detection and Application layer improvements

• Analyzer / Spotlight improvements

• Known issues / obsolescence


2 New col lection device or technology support

• Added support for Ascom 5.5

• Added HSPA+ MIMO support for Nemo

• Improved LTE support for Qualcomm chipset

• Added support for.SwissQual Diversity 10.5

• Added support for ZTE APT 1.2.

• Added support for Couei Accuver 1.8

2.1 Agi l en t suppor t

[Case 52645] Load time message filtering is improved for Agilent UMTS log files to facilitate large file loading into Analyzer Classic.

2.2 Ascom suppor t

• Added support for Ascom version 5.5

• [Case 53087] A problem in setting attribute AscomMasterCallMarker / AscomSlaveCallMarker from Ascom version 5.5 log file has been resolved. The following improvement has been made for the IE browser test: a new attribute AscomStartMarker_IE_Browse has been created for the start of the test, HTTP_pagesize and App_Throughput_DL are set from Measurement Results IE Browse.

2.3 Accuver (Couei / Wi re l essLog i x) suppor t

• Added support for Accuver version 1.8.

• [Case 51081] Fixed a problem in loading Accuver log file collected with DRT scanner.

2.4 Datapro suppor t

• Added support for Datapro LTE.

• Added support for Spotlight Data Service Analysis.

• [Case 50419] Set SINR attribute for EVDO scanner.


2.5 DingL i suppor t

• Set speed attribute SpeedKph.

• Supports video telephony test.

• In GSM, a dropped call event problem with Sagem OT260 handset has been resolved with filtering corrupted messages.

2.6 Er i csson UETR / GPEH suppor t

• [Case 53017] Fixed the issue where CT_Global_Call_Id remains the same, even after CT_Global_Call_Id_Expired has been pegged. More elements are used to create the call id in order to differentiate calls.

• The GPEH event detection has been improved: a "call drop" event will no longer be pegged along with a "call end" event if the first PS attempt with GMM service Request failed, but was then successful when re-attempted during the same RRC Connection.

• [Case 51577] The following problems with UETR event detection are fixed:

• CallDropped or CallFailed is no longer pegged when a voice call is successfully handover to GSM.

• Call events are no longer pegged in the second half of the call, when the call spans over 2 files.

• Ericsson MTR geolocation is now supported.

• [Case 53459] An issue is now fixed which caused GPEH Data to fail to Geolocate following the PN upgrade to Analyzer AU1007.

2.7 Invex .NxG suppor t

• [Case 52314] The problem caused by corrupted Motorola EGPRS messages has now been fixed. This made Analyzer fail when loading some log files.

2.8 Nemo suppor t

• [Case 47953] If the device name is not empty in the header, it is employed as the stream name. This improvement applies to Nemo FF 2.0 and beyond.

• [Case 50731] A problem is now fixed whereby UMTS Frequencies were incorrectly being mapped under GSM1800. GSM scanner attributes are no longer set from UMTS RF scan messages. Instead, UMTS Uu_Scan_RSSI_By_UARFCN is set.

• Added HSPA+ MIMO support for Nemo.


2.9 Qual comm ch ipset suppor t

• Progress in support for LTE. The following attributes are set or created from the Qualcomm LTE chipset:

• LTE_UE_RRC_State

• LTE_UE_LL1_Power_Tx

• LTE_UE_TTI_Count

• LTE_UE_FrameUsage_DL

• LTE_UE_FrameUsage_UL

• LTE_UE_MIMO_1TB_Usage

• LTE_UE_MIMO_2TB_Usage

• LTE_UE_PayloadRate_L1_DL

• LTE_UE_Throughput_L1_DL

• LTE_UE_MAC_Throughput_DL

• LTE_UE_MCS_Average_DL

• LTE_UE_ACK_Rate_DL

• LTE_UE_NACK_Rate_DL

• LTE_UE_TB_Size_Average_DL

• LTE_UE_TB_Size_Max_DL

• LTE_UE_RB_Num_DL

• LTE_UE_RB_Num_UL

• LTE_UE_TB_Size_Average_UL

• LTE_UE_TB_Size_Max_UL

• LTE_UE_MAC_Throughput_UL

• LTE_UE_PhyThroughput_UL

• LTE_UE_Power_Tx

• LTE_UE_WideBand_CQI_Average

• LTE_UE_WideBand_CQI_Cwd0

• LTE_UE_WideBand_CQI_Cwd1

• LTE_UE_RI

• LTE_UE_PMI

• Various issues with HSUPA attribute are fixed. The indices of the array attribute Uu_HSUPA_SGI_Distribution have been rectified to reflect the maximum 38 values that SGI can contain. The correct value to attribute Uu_HSUPA_TB_Size_Average is now set when there are sub frames on DTX.


2.10 Ri s ing suppor t

• Set speed attribute SpeedKph.

• Supports video telephony test.

• Supports dynamic header length.

2.11 Rohde & Schwarz suppor t

• Fixed various issues in the LTE scanner attributes: the correct value is now set for attributes LTE_Scan_RSRQ_SortedBy_RSRP and LTE_Scan_RSRQ_SortedBy_RSRP_for_EARFCN.

2.12 Swi ssQual Di vers i ty /Qua l i poc suppor t

[Case 53338] Supports SwissQual Diversity 10.5.

2.13 ZTE APT suppor t

• [Case 53355]Support ZTE APT 1.2.

2.14 Gener i c

• The help comments for LTE attributes have been improved.

• [Case 53550] A new check box has been introduced in the Batch Sector Plot dialog: Zoom to Coverage. If unchecked, the map extents will not be changed during the plots, allowing users to create all the plots with the same bounds.

• [Case 53474] A new feature has been implemented in the Superstreaming dialog, allowing streams to be selected based on a pattern match.

• [Case 51435] A problem has been resolved where the incorrect data radio mode was being reported while the handset was transferring data using GPRS/EDGE.


3 Appl ication layer improvements

3.1 LTE suppor t fo r Spot l i ght and Spot l i gh t Data Serv i ce Ana l ys i s


3.2 MIMO i n t roduced in to HSPA+ Data Serv i ce Ana lys i s

3.3 Improvement to the UMTS Rad i o Network Exp l orer

• [Case 52380] The definition of Spotlight Interference factor (‘F’ factor) is improved and the online help has been updated to explain how the value should be calculated.


4 Functional it ies improvement

4.1 Improvement to the func t i on Expor t Text F i l e

[Case 51525] A problem is now fixed, whereby the exported text file was empty when more than one SectorHandle attribute was picked to be exported.

Actix Release Notes Analyzer Update – August 2010

10

5 Known Issues / Obsolescence

• None.


11

6 Previous Release Notes

These are the notes for the releases from the last 12 months:

• ReleaseNotes_AnalyzerUpdate_2010_07_July.pdf

• ReleaseNotes_AnalyzerUpdate_2010_06_June.pdf

• ReleaseNotes_AnalyzerUpdate_2010_05_May.pdf

• ReleaseNotes_AnalyzerUpdate_2010_04_April.pdf

• ReleaseNotes_AnalyzerUpdate_2010_03_March.pdf

• ReleaseNotes_AnalyzerUpdate_2010_02_February.pdf

• ReleaseNotes_AnalyzerUpdate_2010_01_January.pdf

• ReleaseNotes_AnalyzerUpdate_2009_12_December.pdf

• ReleaseNotes_AnalyzerUpdate_2009_11_November.pdf

• ReleaseNotes_AnalyzerUpdate_2009_10_October.pdf

• ReleaseNotes_AnalyzerUpdate_2009_09_September.pdf

• ReleaseNotes_AnalyzerUpdate_2009_08_August.pdf


12

releasenotes analyzer update 2010 08 august

Documents