sdl solid zirconia translucent brochure-singlefold...sdl_solid zirconia_translucent...

2
HIGH Translucent Full Zirconia MULTILAYER HIGH TRANSLUCENT ZIRCONIA Ceram TRANSLUCENT ZIRCONIA MULTILAYER HIGH TRANSLUCENT ZIRCONIA Ceram TRANSLUCENT ZIRCONIA Traditional Full Zirconia VS. Anterior and Posterior Crowns and Bridges High Translucent Natural Shade Transition (multilayer) Flexural Strength 1200 MPa Completely chip resistant Only posterior crowns and bridges Not translucent Single shade (monolithic) Flexural strength 1200 MPa Completely chip resistant MULTILAYER HIGH TRANSLUCENT ZIRCONIA Ceram TRANSLUCENT FULL ZIRCONIA sundentallabs.com [email protected] sundentallabs.com [email protected] (866) 561-9777 (866) 561-9777 1800 9th Avenue North St. Petersburg, FL 33713 1800 9th Avenue North St. Petersburg, FL 33713 Full Zirconia with Natural Shade Transition & High Translucency Creates an Optimal Esthetic Effect SunCeram ® High Translucent zirconia offers the unique benefit and advantage of being very similar in optical properties to a natural human tooth. The internal shade layering of the zirconia pucks create color intensity/ chroma with higher translucency toward the incisal. This distinctly sets it apart from the monolithic zirconia.

Upload: others

Post on 28-Jun-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SDL Solid Zirconia Translucent Brochure-SingleFold...SDL_Solid Zirconia_Translucent Brochure-SingleFold.indd Created Date 1/24/2018 5:26:16 PM

HIGH TranslucentFull Zirconia

M U L T I L A Y E R H I G H T R A N S L U C E N T Z I R C O N I ACeram

T R A N S L U C E N T Z I R C O N I AM U L T I L A Y E R H I G H T R A N S L U C E N T Z I R C O N I ACeram

T R A N S L U C E N T Z I R C O N I A

TraditionalFull ZirconiaVS.

✓ Anterior and Posterior Crowns and Bridges

✓ High Translucent

✓ Natural Shade Transition (multilayer)

✓ Flexural Strength1200 MPa

✓ Completely chip resistant

• Only posterior crowns and bridges

• Not translucent

• Single shade(monolithic)

• Flexural strength1200 MPa

• Completely chip resistant

M U L T I L A Y E R H I G H T R A N S L U C E N T Z I R C O N I ACeram

T R A N S L U C E N T F U L L Z I R C O N I A

[email protected]

[email protected] (866) 561-9777(866) 561-9777

1800 9th Avenue NorthSt. Petersburg, FL 33713

1800 9th Avenue NorthSt. Petersburg, FL 33713

Full Zirconia withNatural Shade Transition& High Translucency Creates an OptimalEsthetic Effect

SunCeram® High Translucent zirconia offers the unique benefi t and advantage of being very similar in optical properties to a natural human tooth. The internal shade layering of the zirconia pucks create color intensity/chroma with higher translucency toward the incisal. This distinctly sets it apart from the monolithic zirconia.

Page 2: SDL Solid Zirconia Translucent Brochure-SingleFold...SDL_Solid Zirconia_Translucent Brochure-SingleFold.indd Created Date 1/24/2018 5:26:16 PM

CEMENTING SUNCERAM®

ZIRCONIA RESTORATIONSWITH RMGI

Resin-Modifi ed Glass Ionomer(RMGI) is the recommended cementfor SunCeram® full-zirconiarestorations. There are severalavailable however, two of the morepopular RMGI products are Rely X LutingPlus by 3M ESPE and FujiCem2 GC America.

RETENTIVE PREPARATIONSandblast the internal area of the Zirconia restoration or clean it with Ivoclean (Ivoclar Vivadent). Clean the tooth preparation with fl our of pumice and water on a rubber cup, place a desensitizer/disinfectant on the tooth preparation for two one-minute applications (examples are Gluma from Heraeus Kulzer or MicroPrime from Danville Materials) and suction off(don’t wash it off), and then seat with (RMGI).

ADJUSTING AND POLISHINGSUNCERAM® ZIRCONIA

Adjust: Use a medium grit, egg-shaped diamond bur to make any necessary adjustments. When doing so, use a light water spray or irrigation to prevent excessive heat.Polish: Use a diamond-interspersed fl ame shape or cup shape polisher to restore shine.

Full Zirconia with Natural Shade Transition &High Translucency Creates an Optimal Esthetic Effect

Anterior ZirconiaThis highly esthetic restoration material is designed specifi cally to satisfy the esthetic and functional requirements of the anterior region of the mouth. Anterior zirconia exhibits an average fl exural strength of 1200 MPa with high translucency and multilayer shade

transition similar to natural tooth enamel. Indicated for single crowns, veneers, implant restorations and bridges.

Posterior ZirconiaThe chip-proof durability and fl exural strength of 1200 MPa make SunCeram® zirconia ideal for Bruxers who have broken natural teeth or previous PFM restorations. It is an esthetic alternative to PFM metal occlusal/lingual or

full-cast restorations. Indicated for single crowns, inlays & onlays, implant restorations and bridges.

MULTILAYER TRANSLUCENT ZIRCONIASunCeram® High Translucent zirconia offers the unique benefi t and advantage of being very similar in optical properties to a natural human tooth. The internal shade layering of the zirconia pucks create color intensity/chroma with higher translucency toward the incisal. This distinctly sets it apart from the monolithic zirconia.

PREPARATION REQUIREMENTS• Shoulder preparation is preferred but not required. Feather edge is

acceptable.

• Occlusal space of 1 mm is ideal, however a conservative preparationsimilar to full cast with at least 0.5 mm is acceptable.

TESTIMONIAL“Sun Dental Labs has been producing SunCeram® zirconia crowns and bridges for my patients for some time which are more esthetic looking than the traditional zirconia crowns that appear chalky and unnatural. They are strong enough that they can be used not just in the anterior but the posterior area as well. Sun Ceram zirconia crowns are quality restorations at a competitive price.”- Joseph R. Craig, DDS